DDX7015BT
DDX5902
DDX715WBT
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DDX7015BT/DDX5902/DDX715WBT Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2014 JVC KENWOOD Corporation
DDX_Mid_K.indb 1
B5A-0375-00 (KN/RN)
2014/12/06 15:22
CONTENTS
BEFORE USE............................................................ 2
How to reset your unit.................................................... 3
INITIAL SETTINGS .................................................. 4
BASICS .................................................................... 6
Component names and functions ............................. 6
Common operations ....................................................... 8
Common screen operations......................................... 9
Selecting the playback source...................................11
DISCS .................................................................... 12
USB........................................................................ 17
iPod/iPhone ......................................................... 18
APPs ...................................................................... 22
Pandora® (Only for DDX5902) ............................ 23
iHeartRADIO (Only for DDX5902)....................... 25
AUPEO! ................................................................. 27
TUNER (Only for DDX7015BT/DDX715WBT) ..... 29
HD Radio™ tuner (Only for DDX5902) ................ 31
SiriusXM® Satellite Radio
(Only for DDX5902) ............................................. 34
OTHER EXTERNAL COMPONENTS ...................... 41
Using external audio/video players—AV-IN ........41
Using a rear view camera ............................................41
BEFORE USE
Using a smartphone—HDMI/MHL...........................43
Using an external component via ADS adapter—
OEM Features (Only for DDX5902)...........................43
BLUETOOTH ......................................................... 44
SETTINGS .............................................................. 52
Settings for using applications of iPod/iPhone/
Android ..............................................................................52
Sound adjustment .........................................................53
Adjustment for video playback.................................55
Changing the display design .....................................57
Customizing the <TOP MENU> screen .................58
Customizing the system settings .............................58
Setting menu items .......................................................60
REMOTE CONTROLLER ........................................ 63
CONNECTION/INSTALLATION ............................ 66
REFERENCES ......................................................... 73
Maintenance ....................................................................73
More information ...........................................................73
Error message list ...........................................................77
Troubleshooting .............................................................78
Specifications...................................................................80
IMPORTANT
To ensure proper use, please read through this
manual before using this product. It is especially
important that you read and observe WARNINGS
and CAUTIONS in this manual. Please keep the
manual in a safe and accessible place for future
reference.
V WARNINGS: (To prevent accidents and
damage)
• DO NOT install any unit or wire any cable in a
location where;
– it may obstruct the steering wheel and gearshift
lever operations.
– it may obstruct the operation of safety devices
such as air bags.
– it may obstruct visibility.
• DO NOT operate the unit while driving.
If you need to operate the unit while driving, be
sure to look around carefully.
• The driver must not watch the monitor while
driving.
For DDX7015BT/DDX715WBT:
The marking of products using lasers
How to read this manual:
• Illustrations of DDX5902 are mainly used for explanation. The displays and panels shown in this manual
are examples used to provide clear explanations of the operations. For this reason, they may be different
from the actual displays or panels.
• This manual mainly explains operations using the buttons on the monitor panel and touch panel. For
operations using the remote controller (RC-DV340: supplied only for DDX7015BT/DDX715WBT), see
page 63.
• < > indicates the various screens/menus/operations/settings that appear on the touch panel.
• [ ] indicates the buttons on the touch panel.
• Indication language: English indications are used for the purpose of explanation. You can select the
indication language from the <Setup> menu. (Page 62)
• Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available
from <http://www.kenwood.com/cs/ce/>.
The label is attached to the chassis/case and says
that the component uses laser beams that have
been classified as Class 1. It means that the unit is
utilizing laser beams that are of a weaker class. There
is no danger of hazardous radiation outside the unit.
2
DDX_Mid_K.indb 2
2014/12/06 15:22
BEFORE USE
For DDX5902:
V CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure. In compliance with Federal
Regulations, the following are reproductions of labels on,
or inside the product relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top plate
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
FCC NOTE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This equipment may cause harmful interference to
radio communications, if it is not installed and used in
accordance with the instructions. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
For DDX5902:
IC (Industry Canada) Notice
This device complies with Industry Canada licenseexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.
The term “IC: ” before the certification/registration
number only signifies that the Industry Canada
technical specification were met.
CAUTION
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is
desirable that it should be installed and operated keeping
the radiator at least 20 cm or more away from person’s
body (excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
• Contains Transmitter Module
FCC ID : YZP-RBFAC21XX
• Contains Transmitter Module
IC: 7414A-RBFAC21XX
V Cautions on the monitor:
• The monitor built into this unit has been
produced with high precision, but it may have
some ineffective dots. This is inevitable and is not
considered defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with a sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it
off).
• When the temperature is very cold or very hot...
– Chemical changes occur inside, causing
malfunction.
– Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.
For safety...
• Do not raise the volume level too much, as this
will make driving dangerous by blocking outside
sounds, and may cause hearing loss.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
R How to reset your unit
If the unit fails to operate properly, press the reset
button.
DDX7015BT
DDX5902
DDX715WBT
ENGLISH
DDX_Mid_K.indb 3
3
2014/12/06 15:22
INITIAL SETTINGS
2 Finish the procedure.
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 60)
1
3 Display the <Security Code Set> screen.
• Press [K] repeatedly to change the page on
the <System> menu screen.
The <TOP MENU> screen is displayed.
* Only for DDX7015BT/DDX715WBT.
*
Setting the security function
R Registering the security code (only for
DDX7015BT/DDX715WBT)
<Demonstration>
(Page 61)
<Language>
(Page 62)
<Angle>*
(Page 8)
<R-CAM
Interrupt>
(Page 61)
<Panel Color>
(Page 57)
Activate or deactivate the
display demonstration.
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
Adjust the panel angle.
Select [ON] when
connecting the rear view
camera.
Select the color of the
buttons on the monitor
panel.
You can set a security code to protect your receiver
system against theft.
1 Display the <TOP MENU> screen.
• To clear the registered security code, perform
steps 1 and 2, then press [CLR] in <Security
Code>.
4 Enter a four-digit number (1), then
confirm the entry (2).
On the source control screen:
2 Display the <System> setting screen.
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
5 Repeat step 4 to confirm your security
code.
Now, your security code is registered.
• When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].
4
DDX_Mid_K.indb 4
2014/12/06 15:22
INITIAL SETTINGS
R Activating the security function
You can activate the security function to protect
your receiver system against theft.
1 Display the <System> setting screen.
Clock settings
4 Set the clock time.
1 Display the <TOP MENU> screen.
On the source control screen:
On the <TOP MENU> screen:
2 Display the <Setup> screen.
• Press [K] repeatedly to change the page on
the <System> menu screen.
2
3 Display the <Clock> screen.
<Radio Data Synchronizes the clock time with
System>
FM RBDS.
<OFF>
Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to “00”.
5 Finish the procedure.
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.
ENGLISH
DDX_Mid_K.indb 5
5
2014/12/06 15:22
BASICS
Component names and functions
V Caution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
DDX7015BT
1 Monitor panel*
2 Screen (touch panel)
3 Reset button/Power indicator/Security indicator
• Resets the unit. (Page 3)
• Lights up while the unit is turned on.
• Flashes when the security function is activated.
(Page 5)
4 Volume K/J button
Adjusts the audio volume. (Page 8)
5 AV/AV OUT button
• Displays the current source screen. (Press)
• The function of the button when held varies
depending on the <AV Key Long Press>
setting. (Page 62)
6 AUD/R-CAM button
• Displays the <Equalizer> screen. (Press)
(Page 53)
• The function of the button when held varies
depending on the <AUD Key Long Press>
setting. (Page 62)
7 B MENU button
• Displays the <TOP MENU> screen. (Press)
(Page 10)
• Turns on the power. (Press) (Page 8)
• Turns off the power. (Hold) (Page 8)
8 TEL/VOICE button
• Displays the phone control screen. (Press)
(Page 48)
• Activates voice dialing. (Hold) (Page 49)
9 M (Eject) button
• Ejects the disc. (Tilts the monitor panel fully.)
• Opens/closes the monitor panel.
DDX5902
1 Reset button/Power indicator/Security indicator
• Resets the unit. (Page 3)
• Lights up while the unit is turned on.
• Flashes when the security function is activated.
(Page 5)
2 M (Eject) button
Ejects the disc.
3 Loading slot
* You can change the color of the buttons on the monitor panel.
(Page 57)
6
DDX_Mid_K.indb 6
2014/12/06 15:22
BASICS
4 B MENU button
• Displays the <TOP MENU> screen. (Press)
(Page 10)
• Turns on the power. (Press) (Page 8)
• Turns off the power. (Hold) (Page 8)
5 AV/AV OUT button
• Displays the current source screen. (Press)
• The function of the button when held varies
depending on the <AV Key Long Press>
setting. (Page 62)
6 TEL/VOICE button
• Displays the phone control screen. (Press)
(Page 48)
• The function of the button when held varies
depending on the <TEL Key Long Press>
setting. (Page 62)
7 Volume/ATT/AUDIO knob
• Attenuates the sound. (Press) (Page 8)
• Adjusts the audio volume. (Turn) (Page 8)
• Displays the <Equalizer> screen. (Hold)
(Page 53)
8 Monitor panel*
9 Screen (touch panel)
* You can change the color of the buttons on the monitor panel.
(Page 57)
DDX715WBT
1 Power indicator/Security indicator
• Lights up while the unit is turned on.
• Flashes when the security function is activated.
(Page 5)
2 Monitor panel*
3 Screen (touch panel)
4 TEL/VOICE button
• Displays the phone control screen. (Press)
(Page 48)
• Activates voice dialing. (Hold) (Page 49)
5
/ V.OFF button
• Displays the phone book. (Press) (Page 48)
• The function of the button when held varies
depending on the <P.BOOK Key Long Press>
setting. (Page 62)
6 Volume +/− button
Adjusts the audio volume. (Page 8)
ATT button
Attenuates the sound. (Page 8)
7 M (Eject) button
• Ejects the disc. (Tilts the monitor panel fully.)
• Opens/closes the monitor panel.
8 B MENU button
• Displays the <TOP MENU> screen. (Press)
(Page 10)
• Turns off the power. (Hold) (Page 8)
• Turns on the power. (Press) (Page 8)
9 AV/AV OUT button
• Displays the current source screen. (Press)
• Displays the screen of the external component
connected to the AV-OUT terminal. (Hold)
(Page 71)
p S/T button
Functions the same as [S]/[T] on the touch
panel when playing a source.
q APPS button
Displays the App screen. (Page 22)
w AUDIO button
• Displays the <Equalizer> screen. (Press)
(Page 53)
* You can change the color of the buttons on the monitor panel.
(Page 57)
ENGLISH
DDX_Mid_K.indb 7
7
2014/12/06 15:22
BASICS
Common operations
DDX5902
R Turning on the power
R Adjusting the panel angle (only for
DDX7015BT/DDX715WBT)
1 Display the <Angle Adjust> screen.
DDX7015BT
Turn to the right to increase, and turn to the left to
decrease.
DDX5902
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Display> menu screen.
DDX715WBT
DDX715WBT
R Turning off the power
Press + to increase, and press – to decrease.
• Holding the button increases/decreases the
volume continuously.
DDX7015BT
DDX5902
(Hold)
To attenuate the sound (only for DDX5902/
DDX715WBT)
DDX5902
DDX715WBT
2 Select an angle (0 – 6).
(Hold)
DDX715WBT
(Hold)
R Adjusting the volume
To adjust the volume (00 to 35)
DDX7015BT
The ATT indicator lights up.
To cancel the attenuation: Press the same button
again.
• To set the current position as the power off
position, select [Memory].
Press J to increase, and press K to decrease.
• Holding the button increases/decreases the
volume continuously.
8
DDX_Mid_K.indb 8
2014/12/06 15:22
BASICS
R Putting the unit in standby
R Turning off the screen
1 Display all <TOP MENU> items.
DDX7015BT*1
Common screen operations
R Common screen descriptions
On the <TOP MENU> screen:
(Hold)
DDX5902*2
2
(Hold)
DDX715WBT*3
(Hold)
You can display other screens any time to change
the source, show the information, or change the
settings, etc.
Source control screen
Performs source playback operations.
• The operation buttons vary depending on the
selected source.
1
To turn on the screen: Press AV/AV OUT on the
monitor panel, or touch the display.
*1 This operation works only when <AUD Key Long Press> is
set to [V-OFF]. (Page 62)
*2 This operation works only when <TEL Key Long Press> is
set to [V-OFF]. (Page 62)
*3 This operation works only when <P.BOOK Key Long
Press> is set to [V-OFF]. (Page 62)
2
3
4
Common operation buttons:
1 Displays other operation buttons.
• Disabled when there are no other buttons.
2 Switches between the normal source control
screen and easy control screen. (Page 10)
3 Displays the <TOP MENU> screen. (Page 10)
• Pressing B MENU on the monitor panel also
displays the <TOP MENU> screen.
4 Displays/hides short-cut buttons. (Page 11)
Continued on the next page...
ENGLISH
DDX_Mid_K.indb 9
9
2014/12/06 15:22
BASICS
Easy control screen
Pressing [ ] switches between the normal source
control screen and easy control screen.
The easy control screen allows you to control the
source easily with simple buttons.
• The displayed buttons vary depending on the
selected source.
<Setup> screen
Changes the detailed settings. (Page 60)
1
3
1
3
2
Common operating buttons:
1 Selects the menu category.
2 Displays the <TOP MENU> screen.
3 Changes the page.
4 Returns to the previous screen.
<TOP MENU> screen
Displays the source control screen and settings
screen.
• You can arrange the items to display on the <TOP
MENU> screen. (Page 58)
R Touch screen operations
4
4
2
1 Displays the video control menu while playing a
video.
2 Displays the source control screen while playing
a video.
1
2
3
Common operating buttons:
1 Changes the playback source. (Page 11)
2 Displays all playback sources and items.
(Page 11)
3 Displays the <Setup> screen. (See the right
column.)
• The operation buttons disappear when the
screen is touched or when no operation is
done for about 5 seconds.
3 Goes to the previous chapter/track.*
4 Goes to the next chapter/track.*
* Not available for video from an external component.
10
DDX_Mid_K.indb 10
2014/12/06 15:22
BASICS
Selecting the playback source
On the <TOP MENU> screen:
• You can change the page to display more items by
pressing [J]/[K].
[DISC]
Plays a disc. (Page 12)
[HD Radio]*1
Switches to the HD Radio
broadcast. (Page 31)
[TUNER]*2
Switches to the conventional radio
broadcast. (Page 29)
[iPod]
Plays an iPod/iPhone. (Page 18)
[USB]
Plays files on a USB device.
(Page 17)
[HDMI/MHL]
Plays a device connected to
the HDMI/MHL input terminal.
(Page 43)
[SiriusXM]*1
Switches to the SiriusXM® radio
broadcast. (Page 34)
[PANDORA]*1
Switches to the Pandora
broadcast. (Page 23)
[iHeartRadio]*1 Switches to the iHeartRADIO
broadcast. (Page 25)
[AUPEO!]
Switches to the AUPEO!
application. (Page 27)
[Bluetooth]
Plays a Bluetooth audio player.
(Page 50)
[APPs]
Switches to the App screen from
the connected iPod touch/iPhone/
Android device. (Page 22)
[TEL]
Displays the phone control screen.
(Page 48)
[OEM Features]*1 Switches to the source connected
via ADS adapter. (Page 43)
[AV-IN1][AV-IN2]
Switches to an external
component connected to the AVIN1 or iPod/AV-IN2 input terminal.
(Page 41)
R Using short-cut buttons
While displaying the source control screen or the
<Setup> screen, you can use the short-cut buttons
to go to the items on the <TOP MENU> screen
indicated below.
To display the short-cut buttons
On the source control screen:
*1 Only for DDX5902.
*2 Only for DDX7015BT/DDX715WBT.
R Selecting the playback source on the
<TOP MENU> screen
• You can change the items (other than [SETUP]) to
display on the <TOP MENU> screen. (Page 58)
On the <Setup> screen:
To hide the short-cut buttons: Press [
].
ENGLISH
DDX_Mid_K.indb 11
11
2014/12/06 15:22
DISCS
Playing a disc
• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 74.
R Inserting a disc
Insert a disc with the label side facing up.
DDX7015BT
• If “ ” appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing “ ,”
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
R Ejecting a disc
DDX7015BT
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 55.
R Indications and buttons on the source
control screen
For video playback
1
2
3
DDX5902
DDX5902
DDX715WBT
DDX715WBT
• When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
60 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
The source changes to “DISC” and playback starts.
• The IN indicator lights up while a disc is inserted.
Closing the monitor panel (only for DDX7015BT/
DDX715WBT)
After removing the disc, press M on the monitor
panel. The monitor panel closes.
4 5 6
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Current playback item information (title no./
chapter no./folder no./file no./track no.)
3 Playing time
4 Playback mode (Page 15)
5 File type
6 IN indicator
12
DDX_Mid_K.indb 12
2014/12/06 15:22
DISCS
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
Displays the folder/track list.
[ ]
(Page 14)
Reverse/forward search during
[O] [N]
playback.
• Selects a chapter/track. (Press)
[S] [T]
• Reverse/forward search. (Hold)
Starts/pauses playback.
[IW]
Stops playback.
[o]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the settings for disc
playback on the <DISC Mode>
screen. (Page 16)
[
][
] Selects playback mode. (Page 15)
[Playlist]
Displays the Original Program/
Playlist screen.
Plays in frame-by-frame.
][
]
[
[ ][
[PBC]
]
[MENU]
Selects a folder.
Activates or deactivates the VCD PBC
(Playback Control) function.
Displays the <TOP MENU> screen.
For audio playback
1
2
3
4
5
6 7 8
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Track/file information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Current playback item information (folder no./file
no./track no.)
4 Playback status
5 Playing time
6 Playback mode (Page 15)
7 File type
8 IN indicator
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
Displays the easy control screen.
[
]
(Page 10)
Displays the folder/track list.
[ ]
(Page 14)
Selects a track.
[S] [T]
Reverse/forward search.
[O] [N]
Starts/pauses playback.
[IW]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the settings for disc
playback on the <DISC Mode>
screen. (Page 16)
Selects a folder.
[ ][ ]
][
] Selects playback mode. (Page 15)
[
Stops playback.
[o]
[MENU]
Displays the <TOP MENU> screen.
ENGLISH
DDX_Mid_K.indb 13
13
2014/12/06 15:22
DISCS
R Selecting a folder/track on the list
R Video menu operations
1
You can display the video menu screen during video
playback.
• The operation buttons disappear when the screen
is touched or when no operation is done for about
5 seconds.
2 Select the folder (1), then the item in the
selected folder (2).
• Repeat the procedure until you select the
desired track.
For video playback except VCD
• You can change the page to display more
items by pressing [J]/[K].
• Press [ ] to open the folder containing the
current track.
• Press [
] to return to the root folder.
• Press [
] to return to the upper layer.
[ZOOM]
Displays the picture size selection
screen. (Page 56)
[Aspect]
Selects the aspect ratio.
(Page 56)
[PictureAdjust] Displays the picture adjustment
screen. (Page 55)
[Audio]
Selects the audio type (or channel
for DVD-VR).
[Subtitle]
Selects the subtitle type.
[Angle]
Selects the view angle.
Displays the disc menu.
[ MENU]
[T MENU]
Displays the disc menu (DVD).
[Highlight]
Switches to the direct disc menu
mode. Touch the target item to
select.
• To restore the screen, press AV
on the monitor panel.
[CUR]
Displays the menu/scene
selection screen.
• [J] [K] [H] [I]: Selects an item.
• [Enter]: Confirms the selection.
• [Return]: Returns to the
previous screen.
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
14
DDX_Mid_K.indb 14
2014/12/06 15:22
DISCS
For VCD
To select a track directly on a VCD
R Selecting playback mode
[
[
[ZOOM]
Displays the picture size selection
screen. (Page 56)
[Aspect]
Selects the aspect ratio.
(Page 56)
[PictureAdjust] Displays the picture adjustment
screen. (Page 55)
[Audio]
Selects the audio channel (ST:
stereo, LL: left, RR: right).
[Return]
Displays the previous screen or
menu.
[Direct]
Displays/hides the direct selection
buttons. (See the right column.)
• When you enter a wrong number, press [CLR] to
delete the last entry.
] Selects Repeat playback mode.
] Selects Random playback mode.
• Available playback modes differ depending on the
type of disc/file being played back.
• You cannot activate the repeat mode and the
random mode at the same time.
• Each time you press the button, the playback
mode changes. (The corresponding indicator
lights up.)
– Available items differ depending on the type of
disc/file being played back.
C-REP
Repeats current chapter.
T-REP
Repeats current title/program.
REP
Repeats current track.
FO-REP
Repeats all tracks of the
current folder.
FO-RDM
Randomly plays all tracks of
the current folder, then tracks
of the next folders.
RDM
Randomly plays all tracks.
To cancel Repeat/Random playback: Press the
button repeatedly until the indicator disappears.
ENGLISH
DDX_Mid_K.indb 15
15
2014/12/06 15:22
DISCS
Settings for disc playback
• Available items shown on the <DISC Mode>
screen differ depending on the type of disc/file
being played back.
<Angle
Mark>
<Screen
Ratio>*
R Setting items
<Menu
Select the initial disc menu language.
Language>* (Initial: English) (Page 76)
<Subtitle
Select the initial subtitle language
Language>* or turn subtitles off (Off). (Initial:
English) (Page 76)
<Audio
Select the initial audio language.
Language>* (Initial: Original) (Page 76)
<Dynamic
You can change the dynamic range
Range
while playing using Dolby Digital
Control>*
software.
• Wide: Select this to enjoy a
powerful sound at a low volume
level with its full dynamic range.
• Normal: Select this to reduce the
dynamic range a little.
• Dialog (Initial): Select this to
reproduce movie dialog more
clearly.
Select whether to display the angle
mark.
• ON (Initial): Select this to display
the angle mark.
• OFF: Select this to hide the angle
mark.
Select the monitor type to watch a
wide screen picture on the external
monitor.
16:9 (Initial) 4:3 LB
4:3 PS
Setting the parental lock
The parental lock cannot be set during DVD
playback.
1 Display the <Parental Pass> screen.
On the <DISC Mode> screen:
• Press [K] repeatedly to change the page on
the <DISC Mode> screen.
2 Enter the 4-digit parental pass code (1),
and press [Enter] (2).
<Parental
Level>*
<CD Read>
Set the parental level.
(See the right column.)
Select the files to play on a disc
containing music files. You cannot
change the setting when a disc is
inserted.
• 1 (Initial): Automatically
distinguishes between audio file
discs and music CDs.
• 2: Forces to play as a music CD. No
sound can be heard if an audio file
disc is played.
* You can change these settings only while playback is stopped.
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
3 Adjust the parental level (<OFF>,
<Level 1> to <Level 8>).
To deactivate the parental lock: Select [OFF] for
<Parental Level>.
16
DDX_Mid_K.indb 16
2014/12/06 15:22
USB
Connecting a USB device
You can connect a USB mass storage class device
such as a USB memory, Digital Audio Player etc. to
the unit.
• For details about connecting USB devices, see
page 70.
• You cannot connect a computer or portable HDD
to the USB input terminal.
• For playable file types and notes on using USB
devices, see page 75.
When a USB device is connected...
The source changes to “USB” and playback starts.
• All tracks in the USB device will be played
repeatedly until you change the source.
To disconnect the USB device safely:
Press [M], then disconnect the USB device after “No
Device” appears.
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 55.
R Indications and buttons on the source
control screen
1
2
3
4
6 7
5
Playback information
• The information displayed on the screen differs
depending on the type of file being played back.
1 Track/file information
• Pressing [<] scrolls the text if not all of the text
is shown.
2 Current playback item information (folder no./file
no.)
3 Playback status
4 Playing time
5 Jacket picture (Shown while playing if the file has
tag data that includes the jacket picture)
6 Playback mode (See the right column.)
7 File type
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of file being played
back.
Displays the easy control screen.
[
]
(Page 10)
Displays the list selection screen.
[ ]
(Page 18)
[S] [T] Selects a track.
[O] [N] Reverse/forward search.
Starts/pauses playback.
[IW]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the picture display time
setting on the <USB Mode> screen.
(Page 18)
[ ] [ ] Selects a folder.
Selects repeat playback mode.*1 *2
]
[
• REP: Repeats the current track/file.
• FO-REP: Repeats all tracks/files
in the current folder or specified
category.
[
]
Activates random playback mode.*1 *2
• RDM:
– When selecting the track/file from
the folder, randomly plays all
tracks/files of the current folder,
then the tracks/files of the next
folder.
– When selecting the track/file from
the category, randomly plays
all tracks/files of the specified
category.
Disconnects the USB device safely.
[M]
[MENU]
Displays the <TOP MENU> screen.
*1 To cancel random or repeat mode, press the button repeatedly until
the indicator disappears.
*2 You cannot activate the repeat mode and the random mode at the
same time.
ENGLISH
DDX_Mid_K.indb 17
17
2014/12/06 15:22
iPod/iPhone
USB
R Setting <Picture Display Time>
Set the interval between slides during slide-shows of
the picture files.
• On the <Category List>/<Folder List>: You
can switch the file type to list: Press [ ] to list
audio files, [
] to list video files, or [ ] to
list still picture files.
• On the <Category List>/<Link Search>: To
list the items in alphabetical order, press [A-Z],
then select the first character.
From <Category List>:
Select the category (1), then the item in the
selected category (2).
R Selecting a track in a list
1
2 Select the list.
From <Link Search>:
Select the tag type (1) to display a list of
content that contains the same tag as the track/
file currently being played, then the item (2).
3 Select the track.
• You can change the page to display more
items by pressing [J]/[K].
• Press [
] to return to the root folder.
• Press [
] to return to the upper layer.
• Press [ ] to open the folder containing the
current track.
• If you want to play all tracks in the folder,
press [I] on the right of the desired folder.
From <Folder List>:
Select the folder (1), then the item in the
selected folder (2).
Preparation
R Connecting iPod/iPhone
• For details about connecting iPod/iPhone, see
page 70.
• For playable iPod/iPhone types, see page 76.
Connect your iPod/iPhone according to your
purpose or the type of iPod/iPhone.
Wired connection
• To listen to music: USB Audio cable for iPod/
iPhone
– For iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5: KCA-iP102 (optional
accessory)
– For iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5:
KCA-iP103 (optional accessory)
• To watch video and listen to music: USB Audio
and Video cable for iPod/iPhone
– For iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5: KCA-iP202 (optional
accessory)
– For iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5, use
the HDMI cable KCA-HD100 (optional accessory)
and KCA-iP103 (optional accessory) through a
Lightning-Digital AV adapter (accessory of the
iPod/iPhone)
18
DDX_Mid_K.indb 18
2014/12/06 15:22
iPod/iPhone
Bluetooth connection
Pair the iPod/iPhone through Bluetooth. (Page 44)
• For iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5: To
watch video, connect your iPod/iPhone to the
HDMI/MHL input terminal using KCA-HD100
(optional accessory). (Page 70)
• For iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5: You cannot watch video
with a Bluetooth connection.
R Selecting the iPod/iPhone device to
play and connection method
3 Select the connection method (1), then
press [Next] (2).
When connecting the iPod/iPhone device for
first time, the setup screen (for connection, etc.)
appears. Follow the procedure on the setup screen
to configure the settings.
1 Display the <iPod Settings> screen.
On the <TOP MENU> screen:
<USB +
AV-IN>
• If [Enter] for <iPod Setup> cannot be
selected, put the unit in standby. (Page 9)
2
• If you do not need to change the settings,
press [OK] to exit from the setup screen.
Select this when the iPod/
iPhone is connected using
KCA-iP202 (optional accessory).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using
KCA-iP102 (optional accessory)
or KCA-iP103 (optional
accessory).
<HDMI +
Select this when the iPod/
Bluetooth> iPhone is connected using
HDMI cable KCA-HD100
(optional accessory) and
KCA-iP103 (optional accessory)
through a Lightning-Digital AV
adapter (accessory of the iPod/
iPhone).
<Bluetooth> Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting <USB + AV-IN> or <USB 1
Wire>, go to step 5.
Continued on the next page...
ENGLISH
DDX_Mid_K.indb 19
19
2014/12/06 15:22
iPod/iPhone
4 When selecting <HDMI + Bluetooth> or
<Bluetooth> as the connection method,
the device selection screen appears.
Search for the available iPod/iPhone
devices (1), select the target device from
the list (2), then press [Next].
R Selecting preference settings for iPod/
iPhone playback
Playback operations
When the source is “iPod”...
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 55.
1
2
R Indications and buttons on the source
control screen
1 2
• You can change the page to display more
items by pressing [J]/[K].
• If the device is already listed, skip step 1.
• To stop searching, press [Cancel].
5 Confirm the settings.
3
4
5
<Audiobooks> Select the speed of audio
books.
<Wide
• [ON]: Select this to display
Screen>*
video compatible with
wide-screen display in widescreen.
• [OFF]: Select this to
deactivate.
* You cannot change the setting when iPod/iPhone is connected.
6
Playback information
1 Song/video information
• Pressing [<] scrolls the text if not all of the text
is shown.
2 Track no./Total track number
3 Playback status
4 Playing time
5 Artwork (Shown if the song contains artwork)
6 Playback mode (Page 21)
20
DDX_Mid_K.indb 20
2014/12/06 15:22
iPod/iPhone
Operation buttons
Displays the easy control screen.
[
]
(Page 10)
Displays the audio/video file list. (See
[ ]
the right column.)
Selects an audio/video file.
[S] [T]
Reverse/forward search.
[O] [N]
Starts/pauses playback.
[IW]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the settings for iPod/iPhone
playback on the <iPod Mode>
screen. (Page 20)
Selects repeat playback mode.
[
]
1: Functions the same as
•
Repeat One.
•
All: Functions the same as
Repeat All.
•
: Cancels the repeat mode.
]
Selects random playback mode.*
[
•
: Functions the same as Shuffle
Songs.
•
Album: Functions the same as
Shuffle Albums.
[MENU]
Displays the <TOP MENU> screen.
R Selecting an audio/video file from the
menu
Video menu:
1
2 Select the menu ( : audio or
: video)
(1), a category (2), then a desired item
(3).
• Select an item in each layer until you reach
and select the desired file.
• You can change the page to display more
items by pressing [J]/[K].
• Press [All E] to play all songs/videos.
• Press [A-Z] to sort the list in alphabetical
order.
• Press [
] to return to the top layer.
• Press [
] to return to the upper layer.
• Available categories differ depending on the type
of your iPod/iPhone.
Audio menu:
* To cancel random mode, press the button repeatedly until the
indicator disappears.
ENGLISH
DDX_Mid_K.indb 21
21
2014/12/06 15:22
APPs
You can use an App of the connected iPod touch/
iPhone/Android on this unit.
• For Apps you can use on this unit, visit
<http://www.kenwood.com/cs/ce>.
Preparation
1 Connect the iPod touch/iPhone/Android.
• For wired connection, see page 70 for iPod
touch/iPhone or page 71 for Android.
– To view video, connect the device using
KCA-iP202 or KCA-HD100 (optional
accessory).
• For Bluetooth connection, see page 46.
2 Select the iPod touch/iPhone/Android
device to use and connection method on
the <APP Settings> screen. (Page 52)
Using an App
When the operation buttons are not displayed on
the screen, touch the screen to show them.
• To change settings for video playback, see page
55.
R Playback operations
1 Start the App on your iPod touch/iPhone/
Android.
2 Select “APPs” as the source. (Page 11)
R Operation buttons on the source
control screen
• You can operate some functions of the App on the
touch panel.
• For some applications such as navigation
applications, the operation buttons and
information are not shown. You can perform the
operations on the touch panel, such as scrolling
the map.
– If “ ” appears on the screen, the unit cannot
accept the touch operation you have tried to do.
• You can also play back the audio/video using
iPod/iPhone/Android itself instead of the unit.
R Switching to the App screen while
listening to another source
DDX7015BT*
(Hold)
When connecting the device for the first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
DDX5902*
(Hold)
DDX715WBT
[I]
[W]
[S] [T]
[O] [N]
[IW]
[MENU]
Starts playback.
Pauses playback.
Selects an audio/video file.
Reverse/forward search.
Starts/pauses playback.
Displays the <TOP MENU> screen.
To return to the source control screen: Press the
same button again.
* This operation works only when <AV Key Long Press> is
set to [APPs]. (Page 62)
22
DDX_Mid_K.indb 22
2014/12/06 15:22
Pandora® (Only for DDX5902)
You can stream Pandora from iPod touch/iPhone,
Android or BlackBerry devices.
• Install the latest version of the Pandora
application on your iPod touch/iPhone/Android/
BlackBerry.
Preparation
Connect the device, then start the Pandora
application.
Playback operations
You can operate Pandora using the remote
controller. Only playing, pausing, and skipping are
available.
R Indications and buttons on the source
control screen
1
2
3
4
1 Connect the device.
• For Android/BlackBerry: Pair the Android/
BlackBerry device through Bluetooth.
(Page 44)
• For iPod touch/iPhone: Connect iPod touch/
iPhone. (Page 18)
2 Select the device to use and connection
method on the <APP Settings> screen.
(Page 52)
3 Select “PANDORA” as the source.
On the <TOP MENU> screen:
Playback information
1 Picture data
2 Track information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Playback status
4 Playing time
Operation buttons
Displays the easy control screen.
[
]
(Page 10)
Displays the list selection screen.
[ ]
(Page 24)
Thumbs down to the current track
[ ]
and skips to the next track.
Registers the current track as a
[ ]
favorite.
Starts/pauses playback.
[IW]
Skips the current track.
[T]
• Not available when the Pandora
skip reaches its limit.
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
Bookmarks the artist.
]
[
Bookmarks the current track.
]
[
Adds the current artist to the Station
]
[
List.
Adds the current track to the Station
[
]
List.
[MENU]
Displays the <TOP MENU> screen.
The Pandora application is started.
ENGLISH
DDX_Mid_K.indb 23
23
2014/12/06 15:22
Pandora®
R Selecting a station from the list
1 Display the list selection screen.
2 Select the list type.
<Station List>
<Genre List>
3
Selects from the station
names (Station List).
Selects from the genre names
(Genre List).
Select a station from the list.
On the Station List
[Shuffle]
Plays all the songs in the registered
stations randomly.
[By Date] Sorts the list in reverse
chronological order.
[By Name] Sorts the list in alphabetical order.
• You can change the page to display more
items by pressing [J]/[K].
indicator appears on the left of the
• The
item when Shuffle is activated. (All songs on
the registered stations are played randomly.)
• The
indicator appears on the right of the
item when the station is shared.
On the Genre List
Select a genre (1), then a station (2).
• You can change the page to display more
items by pressing [J]/[K].
• The selected station is added to the Station
List.
Requirements for Pandora®
iPhone or iPod touch
• Install the latest version of the Pandora application
on your iPhone or iPod touch. (Search for
“Pandora” in the Apple iTunes App Store to find
and install the most recent version.)
• Connect iPod touch/iPhone to this unit with a
cable or via Bluetooth.
– When connecting with a cable: Use KCA-iP202,
KCA-HD100, KCA-iP102 (optional accessory) or
KCA-iP103 (optional accessory).
– When connecting via Bluetooth, the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
Android™
• Visit Google play and search for “Pandora” to
install.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
BlackBerry®
• Visit www.pandora.com from the built in browser
to download the Pandora application.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
NOTE
• Ensure you are logged in to your smartphone
application. If you do not have a Pandora account,
you can create one for free from your smartphone
or at www.pandora.com.
• Pandora is available only in the U.S./Australia/New
Zealand.
• Because Pandora is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Pandora cannot be operated
from this unit.
• For issues using the application, contact Pandora
at pandora-support@pandora.com
• Establish an Internet connection using LTE, 3G,
EDGE, or WiFi.
24
DDX_Mid_K.indb 24
2014/12/06 15:22
iHeartRADIO (Only for DDX5902)
iHeartRADIO is a free, all-in-one digital radio service
that lets you listen to your favorite Live Stations or
create commercial-free, all-music Custom Stations
featuring songs from the artists you select and
similar music.
You can stream iHeartRADIO from iPod touch/
iPhone or Android devices.
• Install the latest version of the iHeartRADIO
application on your iPod touch/iPhone/Android.
Preparation
Connect the device, then start the iHeartRADIO
application.
Playback operations
You can operate iHeartRADIO using the remote
controller. Only playing, pausing, and skipping are
available.
R Indications and buttons on the source
control screen
Live station screen:
2
1
3
1 Connect the device.
• For Android: Pair the Android device through
Bluetooth. (Page 44)
• For iPod touch/iPhone: Connect iPod touch/
iPhone. (Page 18)
Custom station screen:
2 Select the device to use and connection
method on the <APP Settings> screen.
(Page 52)
3 Select “iHeartRADIO” as the source.
2
Operation buttons
Displays the easy control screen.
[
]
(Page 10)
Displays the <Station Search> screen or
[ ]
the station list. (Page 26)
Thumbs down to the current track and
[ ]
skips to the next track.
Registers the current track as a favorite.
[ ]
Adds the current track to the <My
[ ]
Stations> list.
Saves the current station to the <My
[ ]*1
Stations> list.
[SCAN]*1 Scans stations randomly.
Displays the variety level selection
[ ]*2
screen. (Page 26)
Skips the current track.
[T]*2
Starts/pauses playback.
[IW]
[MENU] Displays the <TOP MENU> screen.
*1 Appears only for the live station screen.
*2 Appears only for the custom station screen.
1
3
On the <TOP MENU> screen:
Playback information
1 Picture data
2 Playback status
3 Track information
• Pressing [<] scrolls the text if not all of the text
is shown.
iHeartRADIO application is started.
ENGLISH
DDX_Mid_K.indb 25
25
2014/12/06 15:22
iHeartRADIO
R Selecting the variety level for your
custom station
You can adjust the amount of lesser-known music
that gets pushed into your custom station.
1 Display the variety type selection screen.
On the custom station screen:
• Press [ ] to return to the top layer.
• Press [ ] to return to the upper layer.
R Editing the <My Stations> list
1 Select <My Stations> on the <Station
Search> screen. (See the left column.)
2 Display the <Station Edit> screen.
2 Select the variety type.
3 Select stations (1), then press [ ] to
delete the selected stations (2).
<Familiar>
Distributes well-known
tracks.
<Mixed>
Distributes a mix of the
artists and track names.
<Less Familiar> Distributes a wide variety
of tracks including lesserknown ones.
R Searching for a station
1 Display the <Station Search> screen.
2 Select a station.
• Press [ ] to return to the top layer.
• Press [ ] to return to the upper layer.
Requirements for iHeartRADIO
iPhone or iPod touch
• Install the latest version of the iHeartRADIO
application on your iPhone or iPod touch. (Search
for “iHeartRADIO for Auto” in the Apple iTunes
App Store to find and install the most recent
version.)
• Connect iPod touch/iPhone to this unit with a
cable or via Bluetooth. When connecting with
a cable: Use KCA-iP202, KCA-HD100, KCA-iP102
(optional accessory) or KCA-iP103 (optional
accessory).
– When connecting via Bluetooth, the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
Android™
• Visit Google play and search for “iHeartRADIO for
Auto” to install.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
NOTE
• Ensure you are logged in to your smartphone
application. If you do not have an iHeartRADIO
account, you can create one for free from your
smartphone or at http://www.iheart.com/.
• Because iHeartRADIO is a third-party service,
the specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of iHeartRADIO cannot be
operated from this unit.
• For issues using the application, contact
iHeartRADIO at http://www.iheart.com/.
• Establish an Internet connection using LTE, 3G,
EDGE, or WiFi.
26
DDX_Mid_K.indb 26
2014/12/06 15:22
AUPEO!
AUPEO! Personal Radio plays free music you really
like. You can develop your own personalized
Internet radio by rating or skipping tracks.
You can stream AUPEO! from connected iPod
touch/iPhone or Android devices.
• Install the latest version of the AUPEO!
application on your iPod touch/iPhone/Android
and create an account.
Playback operations
You can operate AUPEO! using the remote
controller. Only playing, pausing, and skipping are
available.
R Indications and buttons on the source
control screen
1
2
3
Preparation
Connect the device, then start the AUPEO!
application.
Operation buttons
Displays the easy control screen.
[
]
(Page 10)
Displays the <Station Search>
[ ]
screen. (Page 28)
“Loves” and registers the current
[ ]
track as a favorite.
Starts/pauses playback.
[IW]
Skips the current track.
[T]
“Bans” the current track and skips to
[ ]
the next track.
[MENU]
Displays the <TOP MENU> screen.
1 Connect the device.
• For Android: Pair the Android device through
Bluetooth. (Page 44)
• For iPod touch/iPhone: Connect iPod touch/
iPhone. (Page 18)
2 Select the device to use and connection
method on the <APP Settings> screen.
(Page 52)
3 Select “AUPEO!” as the source.
On the <TOP MENU> screen:
Playback information
1 Picture data
2 Track information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Playback status
The AUPEO! application is started.
ENGLISH
DDX_Mid_K.indb 27
27
2014/12/06 15:22
AUPEO!
R Selecting a station
1 Display the <Station Search> screen.
2 Select the category, then the station.
• To return to the previous layer, press [ ] .
Requirements for AUPEO!
iPhone or iPod touch
• Install the latest version of the AUPEO! application
on your iPhone or iPod touch. (Search for
“AUPEO!” in the Apple iTunes App Store to find
and install the most recent version.)
• Connect iPod touch/iPhone to this unit with a
cable or via Bluetooth.
– When connecting with a cable: Use KCA-iP202,
KCA-HD100, KCA-iP102 (optional accessory) or
KCA-iP103 (optional accessory).
– When connecting via Bluetooth, the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
NOTE
• Ensure you are logged in to your smartphone
application. If you do not have an AUPEO! account,
you can create one for free from your smartphone
or at www.aupeo.com.
• Because AUPEO! is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of AUPEO! cannot be operated
from this unit.
• For issues using the application, contact AUPEO! at
www.aupeo.com.
• Establish an Internet connection using LTE, 3G,
EDGE, or WiFi.
Android™
• Visit Google play and search for “AUPEO!” to
install.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
28
DDX_Mid_K.indb 28
2014/12/06 15:22
TUNER (Only for DDX7015BT/DDX715WBT)
Listening to the radio
❏ Indications and buttons on the source
control screen
1 2
3
Operation buttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
Displays the easy control screen.
[
]
(Page 10)
[PTY]*
Enters PTY search mode. (Page 30)
[AM]
Selects the AM band.
[FM]
Selects the FM band.
Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[S] [T] Searches for a station.
• The search method differs according
to the selected seek mode. (See
above.)
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[TI]*
Activates/deactivates TI standby
reception mode. (Page 30)
Presets stations automatically. (Hold)
[AME ]
(See the right column.)
[MONO]*
Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
monaural mode is activated.
[
]
Changes the display information. (See
the right column.)
[MENU]
Displays the <TOP MENU> screen.
❏ Changing the display information
[SEEK]
4 5 6
7
Tuner reception information
1 Band
2 Preset no.
3 The station frequency currently tuned in
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 Seek mode
6 TI indicator
7 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
The preset list containing the station names for FM
RBDS (when a PS signal is coming in) is displayed.
• Press [
] again to display the text information
for the station currently being received.
Presetting stations
❏ Storing stations in the memory
You can preset 6 stations for each band.
Automatic presetting—AME (Auto Memory)
(Hold)
The local stations with the strongest signals are
found and stored automatically.
* Appears only when FM is selected as the source.
Continued on the next page...
ENGLISH
06-KWD_Tuner_K.indd 29
29
15/03/25 15:47
TUNER
Manual presetting
1 Tune in to a station you want to preset.
(Page 29)
2 Select a preset number.
FM RBDS features
❏ Searching for FM RBDS programs—PTY
Search
❏ Activating/deactivating TI Standby
Reception
You can search for your favorite programs being
broadcast by selecting the PTY code.
1
(Hold)
2 Select a PTY code.
The station selected in step 1 is stored.
❏ Selecting a preset station
(Hold)
• You can change the page to display more
items by pressing [J]/[K].
PTY Search starts.
If there is a station broadcasting a program of
the same PTY code as you have selected, that
station is tuned in.
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station providing RBDS signals.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
30
06-KWD_Tuner_K.indd 30
15/03/25 15:47
HD Radio™ tuner (Only for DDX5902)
About HD Radio™ Technology
Listening to the HD Radio™
broadcast
❏ Indications and buttons on the source
control screen
1
• Program Service Data provides the song name,
artist, station ID, and other relevant data streams
• Adjacent to traditional main stations are HD2/HD3
Channels, providing new original formats on the
FM dial
• HD Radio broadcasts deliver crystal-clear, CD-like
digital audio quality to consumers
2
3
8 Seek mode
9 TI indicator
p HD indicator: Lights up when receiving an HD
Radio broadcast.
q MC indicator: Lights up when receiving an HD
Radio multicast channel.
w HD Radio reception mode (Page 32)
• When digital signals are emitted, the DIGITAL
indicator lights up.
• When analog signals are emitted, the ANALOG
indicator lights up.
4 5 6 7 89p qw
HD Radio reception information
1 Band
2 Preset no.
3 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Message, PTY code and
Station Name.
4 Channel no.
5 Picture or station logo if available
6 The station frequency currently tuned in
7 ST indicator: Lights up when receiving an FM
stereo broadcast with sufficient signal strength.
• Artist Experience is the synchronous transmission,
delivery, and display of images on the HD Radio
receiver that are related to the specific audio
segment.
Continued on the next page...
ENGLISH
06-KWD_Tuner_K.indd 31
31
15/03/25 15:47
HD Radio™ tuner
Operation buttons
Displays the easy control screen.
[
]
(Page 10)
[AM]
Selects the AM band.
[FM]
Selects the FM band.
❏ Changing the display information
2 Press [H] [I] to change the mode.
Switch between digital and analog
audio automatically.
<Digital> Select this to tune to digital audio
only.
<Analog> Select this to tune to analog audio
only.
<Auto>
Searches for a station.
• The search method differs according to
the selected seek mode. (See below.)
[CHK] Selects a sub-channel when receiving an
[CHJ] HD Radio multicast channel.
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE] Changes the settings for HD Radio tuner
reception on the <Mode> screen. (See the
right column.)
[TI]*
Activates/deactivates TI standby reception
mode. (See the far right column.)
[AME ] Presets stations automatically. (Page 33)
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[
]
Displays/hides the information of the
current station. (See the right column.)
[PTY]* Enters PTY search mode. (Page 33)
Displays the <Preset List> screen.
[ ]
(Page 33)
[MENU] Displays the <TOP MENU> screen.
[S]
[T]
* Appears only when FM is selected as the source.
❏ Activating/deactivating TI Standby
Reception
The preset list containing the station names is
displayed.
• Press [
] again to display the text information
for the station currently being received.
❏ Changing the HD Radio reception mode
While receiving an HD Radio broadcast, the unit
tunes to digital or analog audio automatically
according to the receiving condition.
1
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
32
06-KWD_Tuner_K.indd 32
15/03/25 15:47
HD Radio™ tuner
❏ Searching for FM HD Radio programs—
PTY Search
❏ Selecting a preset station from the list
Presetting stations
❏ Storing stations in the memory
You can search for your favorite programs being
broadcast by selecting the PTY code.
You can preset 6 stations for each band.
1
Automatic presetting—AME (Auto Memory)
1
(Hold)
Local stations with the strongest signals are found
and stored automatically.
2 Select a PTY code.
2 Select a station from the list.
Manual presetting
1 Tune in to a station you want to preset.
(Page 32)
2 Select a preset number.
(Hold)
• You can change the page to display more
items by pressing [J]/[K].
PTY Search starts.
If there is a station broadcasting a program of
the same PTY code as you have selected, that
station is tuned in.
(Hold)
The station selected in step 1 is stored.
ENGLISH
06-KWD_Tuner_K.indd 33
33
15/03/25 15:47
SiriusXM® Satellite Radio (Only for DDX5902)
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140 channels,
including commercial-free music plus the best
sports, news, talk, comedy and entertainment.
Welcome to the world of satellite radio. A SiriusXM
Vehicle Tuner and Subscription are required. For
more information, visit www.siriusxm.com.
3 When the following screen appears, press
[Return].
Listening to the SiriusXM® Satellite
Radio
❏ Indications and buttons on the source
control screen
1
2
3
Activating subscription
1 Check your Radio ID.
The SiriusXM Satellite Radio ID is required
for activation and can be found by tuning to
Channel 0 as well as on the label found on the
SiriusXM Connect tuner and its packaging.
• The Radio ID does not include the letters I, O,
S or F.
2 Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
• For users in the U.S.A:
– Online:
Visit www.siriusxm.com/activatenow
– Phone: Call SiriusXM Listener Care at
1-866-635-2349
• For users in Canada:
– Online:
Visit www.siriusxm.ca/activatexm
– Phone: Call XM customer Care at
1-877-438-9677
4
5
6
7
SiriusXM® Satellite Radio reception information
1 Band
2 Preset number
3 Information for the recorded data and the replay
mode (Page 36)
4 Channel Logo or Channel number/Album art
5 Seek mode
6 Signal strength indicator
7 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
34
06-KWD_Tuner_K.indd 34
15/03/25 15:47
SiriusXM® Satellite Radio
Operation buttons
[Song Title]/ Changes the displayed information
[Info]/
each time this button is pressed.
[Category]/
[Channel
Description]
Displays the easy control screen.
[
]
(Page 10)
Obtain information on channels
[ ]
or select a category and then a
channel. (Page 36)
[SEEK]
Changes the seek mode.
• SEEK1: Skip to another available
channel.
• SEEK2: Skip to another preset
channel.
[CHK]/[CHJ] Selects the channel.
[BAND]
Selects the band.
[IW]
[
]
[MODE]
Registers the artist of the
current song as an alert content.
(Page 38)
Registers the current song as an
]
[
alert content. (Page 38)
Activates/deactivates the content
]
[
alert for traffic and weather
information. (Page 39)
[
]
Displays the preset list. (See below.)
Used while replaying content.
[S]/[T]/
[SCAN]/[LIVE] (Page 37)
[MENU]
Displays the <TOP MENU> screen.
[
]
❏ Storing channels in the memory
You can preset 6 channels for each band.
1 Tune in to a channel you want to preset.
(Page 34)
2 Display the preset list. (See the left
column.)
3 Select a preset number.
(Hold)
Presetting channels
❏ Displaying the preset list
The channel selected in step 1 is stored.
❏ Selecting a preset channel
Starts/pauses the content replay.
(Page 37)
Displays other operation buttons.
• Disabled when there are no other
buttons.
Changes the settings for SiriusXM
Satellite Radio reception on
the <SiriusXM Mode> screen.
(Pages 37–40)
1 Display the preset list. (See the left
column.)
2
• Pressing [
] again displays the text information
for the station currently being received.
ENGLISH
06-KWD_Tuner_K.indd 35
35
15/03/25 15:47
SiriusXM® Satellite Radio
Selecting a channel
❏ Selecting a channel on the list
You can obtain information on channels or select a
category and then a channel.
3 Select a channel.
On the <Preset List> screen
Select a band (1), and then select a preset
channel (2).
1 Display the <List Type Select> screen.
❏ Indications on the source control
screen
2 Select the list type.
On the <Channel List> screen
Select a category (1), and then select a channel
(2).
Selects from the preset list.
• To preset the channels, see
page 35.
<Channel List> Selects from the channel
names (Channel List).
Replay
You can pause, rewind and replay content from the
currently tuned channel.
• The SiriusXM Connect Vehicle Tuner continually
buffers up to 60 minutes of audio.
• If you change to another channel during playback,
the Replay buffer content will be lost.
<Preset List>
• You can change the page to display more
items by pressing [J]/[K].
• To list all the channels, select [All Channels].
• Pressing the info change button above the list
displays information in the following order:
Channel Name, Artist Name, Song Title,
Content Info
1
2 3
1 Playback status
2 Progress bar
Shows the remaining capacity (gray) and the
amount of buffered content (blue). If the Replay
buffer is full, the entire bar becomes blue.
• Updated every second.
3 Time code
Shows you the point in the Replay buffer you are
listening to.
• Example: –5:00
– You are listening to audio that is 5 minutes
behind the current broadcast.
• Updated every second.
36
06-KWD_Tuner_K.indd 36
15/03/25 15:47
SiriusXM® Satellite Radio
❏ Replaying content
1 Display operations buttons for replay.
2
• To start/pause the playback, press [IW].
• To skip the current track segment, press [S]/
[T].
– Pressing [S] within 2 seconds of the
beginning of the current track/segment returns
to the previous track.
– Pressing [S] after 2 seconds or more of
the track have been replayed returns to the
beginning of the current track/segment.
• To rewind/fast forward, press and hold [S]/
[T].
• To return to the live position, press [LIVE].
SmartFavorites
User stored channels (P1 to P6) are recognized as
SmartFavorites channels. SiriusXM Connect Vehicle
Tuner automatically buffers their broadcast content
in the background. When you select a SmartFavorite
channel, you can rewind and replay up to 30
minutes of any of the missed news, talk, sports or
music content.
• SmartFavorites is available only when you connect
an SXV200 or later SiriusXM Connect Vehicle
Tuner.
• If you change to another band, the buffered
content is cleared and new channels in the current
band will start buffering.
TuneScan™
When you activate TuneScan™, you will hear 6
seconds of the songs, which have not been listened
to, from each of the music channel presets on the
current Band.
TuneStart™
When you select a preset channel, you can listen to
the current song from the beginning.
Activating TuneStart™
1
The unit starts scanning.
• To select the previous/next content, press [S]
or [T].
• To end scanning and continue listening to the
current song/content, press [SCAN].
• To exit scanning, press and hold [SCAN].
2
To deactivate TuneStart: Select [OFF] for
<TuneStart>.
ENGLISH
06-KWD_Tuner_K.indd 37
37
15/03/25 15:47
SiriusXM® Satellite Radio
Receiving alerts for desired content
— Content Alert
The checkmark appears besides the selected
item.
3 Select the league (1) and the team (2)
then register the content alert (3).
• To show the details of the item, press [<].
• To delete the registered items, press and hold the
item you want to delete (1) ([ ] and a checkmark
is shown beside the selected item), then press
[ ] (2).
The unit informs you when receiving the content
you are interested in such as music, information
about a sports team, weather and traffic information.
❏ Registering content alerts
For artists/songs
[
]
[
]
Registers the artist of the current
song.
Registers the current song.
❏ Selecting the content for the content
alert
1
• To delete all registered items, press and hold [All
Clear ] for <Content Alerts Contents Set>.
For sports teams
1
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
(Hold)
For artists/songs/sports teams
For traffic and weather information
1
2
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
2
2 Select the city for which you want receive
3 Select the category (1), then the item (2).
traffic and weather information.
38
06-KWD_Tuner_K.indd 38
15/03/25 15:47
SiriusXM® Satellite Radio
❏ Activating content alerts
Setting reception restrictions
For artists/songs/sports teams
3 Enter a new four-digit code (1), and then
confirm (2).
❏ Setting the parental control
1
You can limit access to SiriusXM channels, such as
those with mature content.
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
2
Setting/Changing the parental code
• The initial setting is “0000.”
• Changing the code does not change the
<Parental Control>/<Parental Lock Channel
Selection> settings.
1 Display the <Parental Code Check>
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
4 Enter the four-digit code and then press
[Enter] again to confirm the code.
screen.
• To deactivate content alerts: Select [OFF] for
<Content Alerts>.
Activating/Deactivating the parental control
You can set the parental control feature to lock
any SiriusXM channel(s) or automatically lock all
channels classified as “mature” by SiriusXM®.
For traffic and weather information
1
• To deactivate the content alert : press [
again.
]
❏ Switching registered content
2 Enter a four-digit code (1), and then
2
confirm (2).
When receiving the contents registered for content
alerts, an alert appears on the screen. Press [Jump],
then select the item to jump on the <Content
Alerts> screen.
Deactivates the parental mature and
user lock.
[Mature] Locks channels classified as “mature”
only.
[User]
Locks only the selected channels.
[OFF]
• To show the details of the item, press [<].
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
3 Enter the parental code to confirm your
choice.
Continued on the next page...
ENGLISH
06-KWD_Tuner_K.indd 39
39
15/03/25 15:47
SiriusXM® Satellite Radio
Selecting the channels to lock—Parental Lock
Channel
This parental control option allows you to pick
the channels to be locked by the parental control
feature.
• When <Parental Control> is set to [Mature] or
[OFF], you cannot change the <Parental Lock
Channel Selection> setting.
Repeat this step if you want to set the lock on
multiple channels.
To deactivate the parental lock for all locked
channels: Select [All Clear] for <Parental Lock
Channel Selection> on the <SiriusXM Mode>
screen, then enter the parental code number.
❏ Skipping unwanted channels
1
• You can change the page to display more
items by pressing [J]/[K].
• To list all the channels, select [All Channels].
• A check mark appears beside the selected
channel.
If you do not want to receive some channels, you
can skip them.
Activating the channel skipping
1
Repeat this step if you want to skip multiple
channels.
To clear the channel skipping for all skipped
channels: Press and hold [All Clear] in <Skip
Channel Selection> on the <SiriusXM Mode>
screen.
❏ Resetting the SiriusXM Satellite Radio
settings
You can reset the SiriusXM Satellite Radio settings
you set up and restore the default settings.
1
2 Enter the parental code.
3 Select a category (1), and then a channel
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
(2).
2
2 Select a category (1), and then select a
channel (2).
• You can change the page to display more
items by pressing [J]/[K].
• To list all the channels, select [All Channels].
• A check mark appears beside the selected
channel.
(Hold)
40
06-KWD_Tuner_K.indd 40
15/03/25 15:47
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 55.
You can connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals. (Page 71)
R Starting playback
1 Connect an external component to the
AV-IN1 or iPod/AV-IN2 input terminal.
(Page 71)
2 Select “AV-IN1” or “AV-IN2” as the
source.
• Press [K] to change the page on the <TOP
MENU> screen.
Using a rear view camera
• To connect a rear view camera, see page 71.
• To use a rear view camera, a REVERSE lead
connection is required. (Pages 68 and 69)
R Activating the rear view camera
1 Display the <Input> setting screen.
On the <TOP MENU> screen:
R Indications and buttons on the source
control screen
AV-IN name
2
3 Turn on the connected component and
start playing the source.
Operation buttons
[MODE]
Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
• This setting does not affect the
source name “AV-IN 1”/ “AV-IN 2”
displayed on the <TOP MENU>.
[MENU]
Displays the <TOP MENU> screen.
To deactivate: Select [OFF] for <R-CAM Interrupt>.
ENGLISH
DDX_Mid_K.indb 41
41
2014/12/06 15:22
OTHER EXTERNAL COMPONENTS
R Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
*1 This operation works only when <AUD Key Long Press> is
set to [R-CAM]. (Page 62)
*2 This operation works only when <TEL Key Long Press> is
set to [R-CAM]. (Page 62)
*3 This operation works only when <P.BOOK Key Long
Press> is set to [R-CAM]. (Page 62)
R Using the parking guidelines
You can display parking guidelines to enable easier
parking when you shift the gear to the reverse (R)
position.
Adjusting the parking guidelines
Adjust the parking guidelines according to the size
of the car, parking space and so on.
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1 Display the <Display> setting screen. (See
the left column).
• Press [K] repeatedly to change the page on
the <Display> menu screen.
Displaying the parking guidelines
• To erase the caution message, touch the screen.
1 Display the <Display> setting screen.
On the <TOP MENU> screen:
To display the picture from the rear view camera
manually
DDX7015BT*1
2
(Hold)
DDX5902*2
3 Adjust the parking guidelines by selecting
the mark (1), then adjusting the
position of the selected mark (2).
(Hold)
DDX715WBT*3
• Press [K] repeatedly to change the page on
the <Display> menu screen.
(Hold)
2
• When displaying the picture from the rear view
camera manually, you can change the picture
settings using [Aspect]/[PictureAdjust].
(Page 55)
To exit the rear view screen: Press and hold the
same button again.
To deactivate: Select [OFF] for <Parking
Guidelines>.
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Press and hold [Initialize ] for 2 seconds
to set all the marks to the initial default
position.
42
DDX_Mid_K.indb 42
2014/12/06 15:22
OTHER EXTERNAL COMPONENTS
Using a smartphone—HDMI/MHL
R What is HDMI/MHL?
HDMI stands for High Definition Multi-media
Interface. HDMI connections can transfer digital
video source signals (such as from a DVD player)
without converting them to analog.
A new feature that has been added to HDMI that
extends its capabilities further is MHL, or Mobile
High-definition Link.
Both interfaces allow your smartphone to connect to
the device. When it is connected, you can see your
smartphone’s screen on the monitor.
R Displaying the screen of the
smartphone
You can display the screen of smartphones
connected via the HDMI/MHL input terminal.
1 Connect your smartphone to the HDMI/
MHL input terminal. (Page 71)
• Use HDMI cable KCA-HD100 (optional
accessory) or MHL cable KCA-MH100 (optional
accessory).
2 Select “HDMI/MHL” as the source.
On the <TOP MENU> screen:
Using an external component via
ADS adapter—OEM Features (Only for
DDX5902)
You can control the sources from the component via
ADS adapter.
• Preparation: Configure the settings on the <OEM
Setup> screen beforehand. (Page 62)
1 Connect the ADS adapter to the iDatalink
input terminal. (Page 71)
2 Select “OEM Features” as the source.
(Page 11)
On the <TOP MENU> screen:
• Press [K] to change the page on the <TOP
MENU> screen.
About Miracast Dongles
This unit is compatible with Miracast Dongles.
Connecting a Miracast Dongle (KCA-WL100:
optional accessory) to the HDMI/MHL input terminal
(Page 71) enables you to enjoy listening to music,
watching videos, or viewing pictures over a wireless
connection.
• For details about Miracast Dongle settings, etc.,
refer to the instructions supplied with the Miracast
Dongle.
3 Start an application or playback on your
smartphone.
3 Turn on the connected component and
start playing the source.
ENGLISH
DDX_Mid_K.indb 43
43
2014/12/06 15:22
BLUETOOTH
Information for using Bluetooth®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such
as mobile phones, portable PCs, and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Notes
• While driving, do not perform complicated
operations such as dialing numbers, using the
phone book, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
Connecting Bluetooth devices
R Registering a new Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, pair the unit and the device. Pairing
allows Bluetooth devices to communicate with each
other.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1: You can pair the
device and the unit using SSP (Secure Simple
Pairing) which only requires confirmation.
– For devices with Bluetooth 2.0: You need to
enter a PIN code both on the device and unit for
pairing.
• Once the connection is established, it is registered
in the unit even if you reset the unit. Up to 5
devices can be registered in total.
• Two devices for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• To use the registered device, you need to connect
the device to the unit. (Page 46)
Auto pairing
When <Auto Pairing> is set to [ON], iOS devices
(such as iPhone) are automatically paired when
connected via USB. (Page 51)
Pairing a Bluetooth device using SSP (for
Bluetooth 2.1)
When the Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from an
available device.
1 Search the unit (“DDX****”) from your
Bluetooth device.
2 Confirm the request both on the device
and the unit.
256950
OK
• Press [Cancel] to reject the request.
About mobile phones compatible with Phone
book Access Profile (PBAP)
If your mobile phone supports PBAP, you can
display the phone book and call lists on the
touch panel screen when the mobile phone is
connected.
• Phone book: up to 600 entries
• Dialed calls, received calls, and missed calls: up
to 10 entries each
44
DDX_Mid_K.indb 44
2014/12/06 15:22
BLUETOOTH
Pairing a Bluetooth device from the target device
using a PIN code (for Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
On the <TOP MENU> screen:
2 Change the PIN code.
• If you wish to skip changing the PIN code, go
to step 3.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN
code is 15.
4 Select the unit (“DDX****”) on your
Bluetooth device.
• If a PIN code is required, enter “0000” (initial).
When pairing is complete, the device is listed on
the <Paired Device List>.
• To use the paired device, connect the device
on the <Paired Device List>. (Page 46)
• Press [Clear] to delete the last entry.
• You can also display the <Bluetooth Setup>
screen by pressing [
] on the phone control
screen. (Page 48)
3 Search for the unit (“DDX****”) from your
Bluetooth device.
Continued on the next page...
ENGLISH
DDX_Mid_K.indb 45
45
2014/12/06 15:22
BLUETOOTH
Pairing a Bluetooth device from this unit using a
PIN code (for Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
3 Select the device you want to connect (1),
then press [Connection] (2).
1 Display the <Bluetooth Setup> screen.
(Page 45)
(Page 45)
2
2
3 Search for the available devices.
R Deleting a registered Bluetooth device
4 Select [ON] or [OFF] for the target.
3 Select a device to delete (1), then press
[Remove] (2).
• To cancel searching devices, press [Cancel].
4 Select the device you want to pair.
:
:
• If a PIN code is required, enter “0000” (initial).
R Connecting/disconnecting a registered
Bluetooth device
Two devices can be connected simultaneously.
1 Display the <Bluetooth Setup> screen.
(Page 45)
2
Mobile phone
Audio device
• The status is shown as follows:
– “Connected”: A connection has been
established.
– “Connect Ready”: A connection can be
established.
– “Disconnected”: No connection is
established.
• Press [Change] for <APP Setup> to display
the <APP Settings> screen to configure
settings for applications of iPod/iPhone/
Android. (Page 52)
A confirmation message appears. Press [Yes].
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are displayed
when the information is acquired from the device.
46
DDX_Mid_K.indb 46
2014/12/06 15:22
BLUETOOTH
Using a Bluetooth mobile phone
R Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page 41)
To reject a call
R Adjusting the volume of calls/earpiece/
microphone
R Adjusting the echo cancel level/
reducing noise
While talking...
While talking...
• You can adjust the volume level between 0 to 15
(initial: 3).
• Use the monitor panel to adjust the call/earpiece
volume. (Page 8)
• To adjust the echo volume (between −1 to +1,
initial: 0): Adjust <EC LEVEL>.
• To adjust the noise reduction volume (between
0 to −20, initial: −10) : Adjust <NR LEVEL>.
R Switching between handsfree mode
and phone mode
While talking...
When <Auto Response> is set to [ON] (Page 51)
The unit answers incoming calls automatically.
R Ending a call
While talking...
Each time you press the button, the talking
g method
is switched (
: handsfree mode /
:
phone mode).
ENGLISH
DDX_Mid_K.indb 47
47
2014/12/06 15:22
BLUETOOTH
R Sending text during a call
R Making a call
You can send text during a call using the DTMF (Dual
Tone Multi Frequency) function.
1 Display the phone control screen.
While talking...
• You can display the <Bluetooth Setup>
].
screen by pressing [
On the <TOP MENU> screen:
• Press [K] to change the page on the <TOP
MENU> screen.
* When the mobile phone is not compatible with Phone Book Access
Profile (PBAP), the phone book is not displayed.
From the preset list/phone book/call lists
1
• You can also display the phone control screen
by pressing TEL on the monitor panel.
2 Select a method to make a call.
1
2
• The name of the active device appears. The
devices are switched each time the button is
pressed.
]
]
[
3
R Switching between two connected
devices
When 2 devices are connected, you can change the
device to use.
On the phone control screen:
[
From the preset list
From the phone book
• For DDX715WBT: You can also
display the phone book by pressing
/V.OFF on the monitor panel.
[
]
From the missed call list
[
]
From the received call list
[
]
From the dialed call list
2 Select the target (1), then make a call (2).
4
• You can show more items by pressing [J]/[K].
1 From the phone book*/call lists
2 Direct number entry
3 From the preset list
• To preset, see page 50.
4 Voice dialing
• You can change the page to display more
items by pressing [J]/[K].
48
DDX_Mid_K.indb 48
2014/12/06 15:22
BLUETOOTH
• To use the A to Z search in the phone book:
When the phone book list is displayed, you can
search by initial.
1
• To display other phone numbers:
When the phone book list is displayed, you can
switch between phone numbers if several phone
numbers are registered for the same person.
1 Switch the phone number.
2 Select the initial.
• If the initial character is a number, press
[1,2,3...] and then select the number.
• The phone number switches each time [>] is
pressed.
2 Select a phone number to call.
Voice dialing
• Available only when the connected mobile phone
has a voice recognition system.
1 Activate voice dialing.
On the phone control screen:
• Press [K] repeatedly to change the page on
the phone control screen.
• You can also activate voice dialing by holding
TEL on the monitor panel.*
2 Say the name of the person you want to
call.
• If the unit cannot find the target, the following
screen appears. Press [Start], then say the
name again.
3 Select a phone number from the list.
Direct number entry
You can enter up to 31 numbers.
To cancel voice dialing: Press [Cancel].
* For DDX5902: This operation works only when <TEL Key Long
Press> is set to [Voice]. (Page 62)
• Press [
] to delete the last entry.
• Press and hold [0/+] to add “+” to the phone
number.
ENGLISH
DDX_Mid_K.indb 49
49
2014/12/06 15:22
BLUETOOTH
R Presetting phone numbers
You can preset up to 5 phone numbers.
1 Display the phone control screen.
(Page 48)
2 Enter the numbers on the direct number
entry screen, then display the preset list.
Using the Bluetooth audio player
• To register a new device, see page 44.
• To connect/disconnect a device, see page 46.
R Indications and buttons on the source
control screen
12
3
3 Select a preset number to store into.
4
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
(Hold)
• To display the preset list, press [
control screen.
Playback information
1 Playback status*
2 Playing time*
3 Tag data (current track title/artist name/album
title)*
• Pressing [<] scrolls the text if not all of the text
is shown.
4 The signal strength and battery level (only when
the information is acquired from the device)
Operation buttons
Displays the easy control screen.
[
]
(Page 10)
• Selects a track. (Press)
[S] [T]
• Reverse/forward search.* (Hold)
Starts playback.
[I]
Pauses playback.
[W]
[MENU]
Displays the <TOP MENU> screen.
* Available only for devices compatible with AVRCP 1.3.
] on the phone
50
DDX_Mid_K.indb 50
2014/12/06 15:22
BLUETOOTH
Settings for Bluetooth devices
You can change various settings for using Bluetooth
devices on the <Bluetooth Setup> screen.
1 Display the <Bluetooth Setup> screen.
On the <TOP MENU> screen:
• You can also display the <Bluetooth Setup>
screen by pressing [
] on the phone control
screen. (Page 48)
2 Configure the Bluetooth settings.
R Setting items
<Paired Device Press [Enter] to show the list
List>
of registered devices. You can
connect a device or delete
registered devices. (Page 46)
<PIN Code>
Changes the PIN code of the unit.
(Page 45)
<Device
Shows the device name to be
Name>
shown on the Bluetooth device —
DDX****.
<Device
Shows the device address of the
Address>
unit.
<Auto
• ON (Initial): A connection is
Connect>
automatically established with
the last connected Bluetooth
device when the unit is turned
on.
• OFF: Cancels.
<Bluetooth HF/ Select the speakers used for
Audio>
Bluetooth (both phone and audio
player).
• Front Only: Front speakers only.
• All (Initial): All speakers.
<Auto
• ON: The unit answers the
Response>
incoming calls automatically
after 5 seconds.
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
<Auto Pairing> • ON (Initial): Establishes
pairing automatically with the
connected iOS device (such as
iPhone) even if the Bluetooth
function is deactivated on
the device. (Auto pairing may
not work for some devices
depending on the iOS version.)
• OFF: Cancels.
<Ring Mode>
• System (Initial): The ring tone
set on the unit is used.
• Phone: The ring tone set on
the mobile phone is used.
(This function may not work
depending on the mobile
phone.)
<Ring Tone
When <Ring Mode> is set to
Change>
<System>, select the ring tone
for received calls and SMS from
[Tone1] (Initial), [Tone2], [Tone3].
<Initialize>
Hold [Enter] to reset all settings
you have made for using
Bluetooth mobile phones and
Bluetooth audio players.
ENGLISH
DDX_Mid_K.indb 51
51
2014/12/06 15:22
SETTINGS
Settings for using applications of
iPod/iPhone/Android
Before using applications of iPod/iPhone/Android
such as Pandora, iHeartRADIO, or AUPEO!, select the
device to use and connection method.
When connecting the device for first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
4
• If you do not need to change the setting,
press [OK] to exit from the setup screen.
5 Select the device type (1), then press
[Next] (2).
1 Pair the iPod/iPhone/Android device
through Bluetooth. (Page 44)
2 Display the <APP Setup> screen.
On the <TOP MENU> screen:
6 Select the connection method (1), then
press [Next] (2).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using KCAiP102 (optional accessory) or
KCA-iP103 (optional accessory).
<HDMI +
Select this when the iPod/
Bluetooth> iPhone is connected using
HDMI cable KCA-HD100
(optional accessory) and
KCA-iP103 (optional accessory)
through a Lightning-Digital AV
adapter (accessory of the iPod/
iPhone).
<Bluetooth> Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting <USB + AV-IN> or <USB 1
Wire>, go to step 8.
7 When selecting <HDMI + Bluetooth> or
<Bluetooth> as the connection method,
the device selection screen appears.
Search for the available iPod/iPhone/
Android devices (1), select the target
device from the list (2), then press [Next].
• If [Enter] for <APP Setup> cannot be
selected, put the unit in standby. (Page 9)
3 Display the <APP Settings> screen.
For Android:
<HDMI/MHL Select this when the Android is
+ Bluetooth> connected both by cable to the
HDMI/MHL input terminal and
via Bluetooth.
<Bluetooth> Select this when the device is
connected via Bluetooth.
For iPod/iPhone:
<USB +
Select this when the iPod/
AV-IN>
iPhone is connected using
KCA-iP202 (optional accessory).
• You can change the page to display more
items by pressing [J]/[K].
• If the device is already listed, skip step 1.
• To stop searching, press [Cancel].
8 Confirm the settings.
52
DDX_Mid_K.indb 52
2014/12/06 15:22
SETTINGS
Sound adjustment
R Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/AAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the <TOP MENU> screen:
• You can also display the <Equalizer> screen
by pressing AUD (for DDX7015BT)/AUDIO (for
DDX715WBT) or by pressing and holding the
Volume/ATT/AUDIO knob (for DDX5902) on the
monitor panel.
Storing your own adjustment—Adjusting the
sound precisely
R Setting the car type and speakers
1 Display the <Car Setting> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
1 Select a sound mode. (See the left column.)
2 Select a band and adjust the level of the
selected band.
• The number of bands depends on the model.
• You can adjust the level by dragging the slider
or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
2 Select a car type (1), and then select the
location of the speakers (2).
The adjustments are stored and <User> is
activated.
2 Select a sound mode.
3 Activate ([ON]) or deactivate ([OFF]) the
bass (<Bass EXT>) (1), and then adjust
the subwoofer level (2).
• You can change the page to display more
items by pressing [J]/[K].
ENGLISH
DDX_Mid_K.indb 53
53
2014/12/06 15:22
SETTINGS
R Setting the speakers—speaker size and
crossover frequency
4 Adjust the crossover frequency of the
selected speaker.
1 Display the <Speaker Select> screen.
R Setting the listening position
You can adjust the sound effects according to your
listening position.
1 Display the <Position> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
<Gain>
2 Select the speaker type (front speakers,
rear speakers, or subwoofer).
3 Select the size of the selected speaker.
Adjusts the output volume of
the selected speaker.
<HPF FREQ> Adjusts the crossover frequency
for the front or rear speakers
(high pass filter).*1
<LPF FREQ> Adjusts the crossover for the
subwoofer (low pass filter).*2
<Slope>
Adjusts the crossover slope.
<Phase>
Selects the phase for the
subwoofer.*2
2 Select the listening position ([All],
[Front L], [Front R] or [Front All]).
*1 Appears only when the front or rear speakers are selected.
*2 Appears only when the subwoofer is selected.
54
DDX_Mid_K.indb 54
2014/12/06 15:22
SETTINGS
Adjusting the Digital Time Alignment (DTA)
Make fine adjustments to the delay time of
the speaker output to create a more suitable
environment for your vehicle.
1 Display the <Position> screen. (Page 54)
2 Display the <Position DTA> screen.
3 Select the speaker you want to adjust (1),
and then adjust each item (2).
Determining the value for <Position DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance
of the furthest speaker and other speakers.
4 Set the DTA value calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers.
Adjustment for video playback
R Adjusting the picture
You can adjust the picture quality.
1 Display the adjustment menu.
Example: When [Front All] is selected as the
listening position
2 Select [DIM ON] (dimmer on) or [DIM OFF]
+3.5 ft
(dimmer off).
1.4 ft
2.45 ft
<Distance> Adjusts the Digital Time
Alignment (DTA) value.
<Gain>
Adjusts the output volume of
the selected speaker.
+2.45 ft
4.9 ft
+0 ft
• To determine the adjustment value, see the
right column.
• To initialize the setting value, press
[Initialize].
Continued on the next page...
ENGLISH
DDX_Mid_K.indb 55
55
2014/12/06 15:22
SETTINGS
3 Adjust the picture.
2 Select the aspect ratio.
R Zooming the picture
You can zoom the picture. Zooming is available only
when discs are played back.
1 Display the adjustment menu.
<Bright>
Adjusts the brightness. (−15
to +15)
<Contrast>
Adjusts the contrast. (−10 to
+10)
<Black>
Adjusts the blackness. (−10 to
+10)
<Color>
Adjusts the color. (−10 to +10)
<Tint>
Adjusts the tint. (−10 to +10)
<Sharpness> Adjusts the sharpness. (−2 to
+2)
<Full>*
For 16:9 original pictures
4:3 signal
16:9 signal
<Normal>*
For 4:3 original pictures
4:3 signal
16:9 signal
<Just>
For viewing 4:3 pictures
naturally on the wide screen
4:3 signal
16:9 signal
<Zoom1> –
<Zoom3>
Changes the magnification.
• The aspect ratio is
automatically selected to
match the video source.
2 Change the magnification (1), then move
R Changing the aspect ratio
the zooming frame (2).
You can change the aspect ratio for video playback.
1 Display the adjustment menu.
* While DivX is played back with <Screen Ratio> set to [16:9]
(Page 16), the aspect ratio may not set correctly.
• The zoom function cannot be used for some video
sources.
56
DDX_Mid_K.indb 56
2014/12/06 15:22
SETTINGS
You can change the background and panel color.
• The number of preset backgrounds and the
designs available differ depending on the
model.
1 Display the <User Customize> screen.
To select a panel color
Changing the display design
On the <TOP MENU> screen:
*2
R Storing your favorite image for the
background
You can set your favorite image stored on the
connected USB device.
• Use a JPEG/PNG/BMP file with a resolution of 800
x 480 pixels.
• The color of the captured image may look
different from that of the actual scene.
1 Connect the USB device on which the
image is stored. (Page 70)
• Selecting [Scan] changes the illumination
color gradually.
*1 Store your own scene beforehand. (See the right column.)
*2 Store your own color adjustment beforehand. (See below.)
2 Display the <User Customize> screen.
(See the far left column.)
3 Display the file selection screen.
R Making your own color adjustment
2 Select an item to change (background
design: [Background]/panel color: [Panel
Color]).
1 Select [Panel Color] on the <User
Customize> screen. (See the left column.)
2
4 Select the folder (1), then the file for the
3 Select the dimmer setting for the color (1),
3 Select a background/panel color.
then adjust the color (2).
To select a background
*1
background image in the selected folder
(2).
• You can change the page to display more
items by pressing [J]/[K].
A confirmation message appears. Press [OK]
to store the new image. (The existing image is
replaced with the new one.)
ENGLISH
DDX_Mid_K.indb 57
57
2014/12/06 15:22
SETTINGS
Customizing the <TOP MENU>
screen
You can arrange the items to display on the <TOP
MENU> screen.
1 Display the <Menu Customize> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Display> menu screen.
Customizing the system settings
R Memorizing/recalling the settings
• You can memorize the settings changed in the
<Setup> menu and recall the memorized settings
any time.
• The memorized settings are kept even when the
unit is reset.
1 Display the <SETUP Memory> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2 Select the position to place the icon (1),
then select the item you want to display in
the selected position (2).
2
• To cancel, press [No].
3 Select an operation.
[Recall]
Recalls the memorized settings.
[Memory] Memorizes the current settings.
[Clear]
Clears the currently memorized
settings.
• To cancel, press [Cancel].
A confirmation message appears. Press [Yes].
Repeat this step to place icons for other items.
58
DDX_Mid_K.indb 58
2014/12/06 15:22
SETTINGS
R Locking the settings
R Adjusting the touch position
You can lock the settings to prevent them from
being changed.
•
is shown beside the settings that can be
locked.
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <Touch Panel Adjust> screen.
1 Display the <SETUP Memory> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
(Page 58)
2
3
To unlock the setting: Press [Unlock].
R Updating the system
You can update the system by connecting a USB
device containing an update file.
• To update the system, visit <http://www2.
jvckenwood.com/cs/ce/>.
1 Create an update file, copy it to a USB
device, and connect it to the unit.
• To connect a USB device, see page 70.
2 Display the <System Information>
screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
<Application
Version>
<System Version>
<Bluetooth
Version>
Updates the system
application.
Updates the system.
Updates the Bluetooth
application.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
2 Touch the center of the marks at the lower
left and at the upper right as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
ENGLISH
DDX_Mid_K.indb 59
59
2014/12/06 15:22
SETTINGS
Setting menu items
R Displaying the <Setup> menu screen
• You can change the page to display more items by
pressing [J]/[K].
• You cannot change the <Audio> settings screen
when [STANDBY] is selected on the <TOP
MENU>. (Page 9)
R <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 53)
• Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/
Powerful/iPod*1/User
<Loudness>
You can activate/deactivate loudness.
• ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
• OFF: Cancels.
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and DivX/MPEG1/MPEG2/WMV/MP3/WMA/
AAC.) The volume level will automatically increase or
decrease when you change the source.
• –15 to +6 (Initial: 0)
<SW Level>
Adjust the subwoofer level.
• –50 to +10 (Initial: 0)
<Bass Boost>
Select your preferred bass boost level.
• OFF (Initial)/Level 1/Level 2/Level 3
<Car Setting>*2
Select a car type and speaker location. (Page 53)
• Car type: Off (Initial)/Compact/Full Size Car/
Wagon/Minivan/SUV/Minivan (Long)
• Speaker Location: Select the location of the
speakers in your car.
– Front: Door (Initial)/On Dash/Under Dash
– Rear*3: Door/ Rear Deck/2nd Row/3rd Row
<Speaker Select>*2
Select the speaker size and adjust the crossover
frequency. (Page 54)
<Position>
Adjust the sound effects according to your listening
position. (Page 54)
<DSP Select>
Select whether to use the Digital Signal Processor
(DSP) system.
• Bypass: Invalidates all the settings for the DSP.
• Through (Initial): Uses the DSP.
<Drive Equalizer>
You can reduce the driving noise by raising the
bandwidth.
• ON (Initial): Activates the Drive Equalizer.
• OFF: Cancels.
*1 Appears only when iPod is selected as the source.
*2 When an item is grayed out, you cannot change the setting. Select
[Unlock] on the <SETUP Memory> screen to change the
setting. (Page 59)
*3 The initial setting varies depending on the car type setting.
60
DDX_Mid_K.indb 60
2014/12/06 15:22
SETTINGS
❏ <Display> setting screen
<Dimmer>
• Auto (Initial): Dims the screen and button
illumination when you turn on the headlights.
– The ILLUMI lead connection is required.
(Page 68)*1
• ON: Activates dimmer.
• OFF: Cancels.
<User Customize>
Change the display design (background and panel
color). (Page 57)
<OSD Clock>
• ON: Displays the clock while a video source is
playing.
• OFF (Initial): Cancels.
<Demonstration>
• ON (Initial): Activates the demonstration on the
screen.
• OFF: Cancels.
<Scroll>
• ON (Initial): Scrolls the displayed information
repeatedly.
• Once: Scrolls the displayed information once.
• OFF: Cancels.
Pressing [<] scrolls the text regardless of this setting.
<Menu Customize>
Change the items to display on the <TOP MENU>
screen. (Page 58)
<Screen Adjustment>
Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select
[DIM ON] (dimmer on)/[DIM OFF] (dimmer off),
then change the following settings:
• Bright: Adjusts brightness.
– –15 to +15 (Initial: 0 for dimmer on/+15 for
dimmer off)
• Black: Adjusts blackness.
– –10 to +10 (Initial: 0)
<Angle>*2
Adjust the panel angle. (Page 8)
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
(Page 42)
• OFF: Cancels.
<Guidelines Setup>
Adjusts the parking guidelines. (Page 42)
<Parking Assist Disp.>*3
When an ADS adapter is connected, you can display
information about obstacles around the car.
• ON: Always displays information.
• Dyn. (Initial): Displays information when the
sensor detects obstacles.
• OFF: Cancels.
<Parking Assist Pos.>*3
Select where information about obstacles is
displayed on the screen (left or right).
• Left/Right (Initial)
❏ <Input> setting screen
<R-CAM Interrupt>
• ON: Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
• OFF (Initial): Select this when no camera is
connected.
*1 Only for DDX7015BT/DDX5902.
*2 Only for DDX7015BT/DDX715WBT.
*3 Only for DDX5902.
ENGLISH
09_Settings.indd 61
61
15/03/09 16:26
SETTINGS
R <System> setting screen
<Language>
Select the text language used for on-screen
information.
• English (Initial)/Español/Français/Deutsch/
Italiano/Nederlands/Ελληνικά/Português/
Türkçe/Čeština/Polski/Magyar/Руccĸий/
/
/
/
/
/
/Bahasa
Indonesia/
• GUI Language: Select the language used for
displaying operation buttons and menu items.
– English (Initial)/Local (the language selected
above)
<Clock>
Adjust the clock time. (Page 5)
<iPod Setup>
Configure the settings of iPod. (Page 19)
<APP Setup>
• APP Connection Setup: Configure the Apps
settings. (Page 52)
• APP Interrupt Volume: Adjust the App volume.
– 0 to 35 (Initial: 17)
<Bluetooth Setup>
Configure settings for using a Bluetooth device,
such as connection and other general operations.
(Page 51)
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
<SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page 58)
<OEM Setup>*1
Shows information about/changes the settings for
using the ADS adapter.
<DivX(R) VOD>*2
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit’s Registration Code is overwritten
for copyright protection.
• Press [Enter] to display the information.
• To return to the previous screen, press [OK].
<TEL Key Long Press>*1
Assigns the function of the TEL button when held.
• R-CAM: Displays the picture from the rear view
camera. (Page 42)
• V-OFF: Turns off the screen. (Page 9)
• Voice (Initial): Activates voice dialing. (Page 49)
<AV-OUT>*3
You can determine the use of the external
component connected to the AV-OUT terminal.
• OFF (Initial)/AV-IN1/AV-IN2/DVD
<AV Key Long Press>*3
Assigns the function of the AV button when held.
• AV-OUT (Initial): Selects the AV source for extra
monitors or amplifiers.
• APPs: Displays the Apps screen. (Page 22)
<AUD Key Long Press>*4
Assigns the function of the AUD button when held.
• V-OFF (Initial for DDX5092): Turns off the screen.
(Page 9)
• R-CAM (Initial for DDX7015BT/DDX715WBT):
Displays the picture from the rear view camera.
(Page 42)
<P.BOOK Key Long Press>*5
Assigns the function of the
/ V.OFF button when
held.
• V-OFF (Initial): Turns off the screen. (Page 9)
• R-CAM: Displays the picture from the rear view
camera. (Page 42)
<Security Code>*2
Register the security code for the unit. (Page 4)
<SI>
Activate or deactivate the security function.
(Page 5)
<Serial Number>*1
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch position of the buttons on the
screen. (Page 59)
<Steering Remote Controller>*2
Assign functions to the keys on the remote
controller of the steering wheel. (Page 65)
<System Information>
Displays the version information of the software.
You can update the software. (Page 59)
*1
*2
*3
*4
*5
Only for DDX5902.
Only for DDX7015BT/DDX715WBT.
Only for DDX7015BT/DDX5902.
Only for DDX7015BT.
Only for DDX715WBT.
62
DDX_Mid_K.indb 62
2014/12/06 15:22
REMOTE CONTROLLER
Overview
DDX7015BT/DDX715WBT:
This unit can be operated using the Remote
Controller (RC-DV340) supplied with this unit.
DDX5902:
Optional Remote Controller KNA-RCDV331 is
designed for controlling this unit. Refer to the
instruction manual that comes with the remote
controller.
V Caution:
• Put the Remote Controller in a place where it will
not move during braking or other operations. A
dangerous situation could result if the Remote
Controller falls down and gets wedged under the
pedals while driving.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not recharge, short, break up or heat the
battery, or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled fluid
comes in contact with your eyes or clothing,
immediately rinse with water and consult a
physician.
• Place the battery out of reach of children. In the
unlikely event that a child swallows the battery,
immediately consult a physician.
R Battery installation
Use two “AAA”/”R03”-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
Operations from the remote
controller
R Common operations (AUD mode)
SRC
• Selects the source.
• Hangs up the incoming/current call.
J/K VOL
Adjusts the volume level.
ATT
Attenuates/restores the sound.
DISP/V.SEL Does not function for this unit.
ENTER
Enters options.
Answers incoming calls.
• If the Remote Controller operates only over
shorter distances or does not operate at all, it is
possible that the batteries are depleted. In such
instances, replace both batteries with new ones.
R Remote Controller mode switch
The functions operated from the remote controller
differ depending on the position of the mode switch.
AUDt
DVDt
FNC/PBC/
MENU
Switches the control screen.
Changes the aspect ratio.
MODE/
• The aspect ratio changes each time
TOP MENU
you press this key.
OPEN
Adjusts the panel angle.*
• The panel angle changes each time
you press this key.
* Available for DDX7015BT/DDX715WBT only.
T Vt
AUD mode: Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode: Switch to this mode when playing DVDs
or CDs etc. with the player integrated in this unit.
TV mode: Not used.
• The position of the remote control mode switch
is indicated in the title of each mode, e.g., “AUD
mode”.
• When controlling a player that is not integrated in
the unit, select “AUD” mode.
ENGLISH
DDX_Mid_K.indb 63
63
2014/12/06 15:22
REMOTE CONTROLLER
R DVD/VCD (DVD mode)
J/K/H/I
S/T
I/W
o
0–9
Moves the cursor when displaying a
menu.
Selects a track.
Starts/pauses playback.
Stops and memorizes the point where
the disc stops.
• Specifies the number to search for
in direct search.
: Fast forwards/
•
backwards.
– Fast forward/backward speed
changes each time you press this
key.
•
: Slow forwards/
backwards during pause.
MODE/
Shows the disc top menu.
TOP MENU
FNC/PBC/
Shows the disc menu.
MENU
SUBTITLE Changes the subtitle language.
Changes the zoom ratio.
ZOOM
• Zoom ratio changes each time you
press this key.
Changes the picture angle.
ANGLE
• Picture angle changes each time
you press this key.
Changes the voice language.
AUDIO
• Voice language changes each time
you press this key.
Enters direct search mode. (See the far
DIRECT
right column.)
Deletes a character while in direct
CLEAR
search mode.
R Music Disc/Audio file/Video file/Picture
file (AUD mode)
AM –/FM + Selects a folder.
R iPod (AUD mode)
S/T
Selects music/videos.
I/W
Starts/pauses playback.
S/T
Selects a track/file.
I/W
Starts/pauses playback.
0–9
Specifies the number to search for in
direct search.
AM –/FM + Selects a folder.
S/T
Selects a file.
DIRECT
Enters direct search mode. (See the
right column.)
I/W
Starts/pauses playback.
R Radio/HD Radio*/SiriusXM* (AUD
mode)
AM –/FM + Selects the band.
S/T
Searches for stations.
I/W
Changes the seek mode (AUTO1,
AUTO2, MANU).
0–9
–
• Specifies preset number. (
)
• Specifies the frequency of the
station to receive to search for in
direct search.
DIRECT
Enters direct search mode. (See the
right column.)
R USB (AUD mode)
Searching for an item (chapter/title/folder/file/
track) directly
1 Press DIRECT to enter the search mode.
Each time you press DIRECT, the item to search
for changes.
2 Press a number button to select a desired item.
3 Press ENTER to confirm the selection.
Searching for a tuner frequency directly
1 Press DIRECT to enter the search mode.
2 Press number buttons to enter a frequency.
3 Press S/T to confirm the entry.
* Only for DDX5902.
64
DDX_Mid_K.indb 64
2014/12/06 15:22
REMOTE CONTROLLER
Using the steering remote
controller (Only for DDX7015BT/
DDX715WBT)
You can assign functions to the keys of the remote
controller on the steering wheel.
• This function is available only when your vehicle
is equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not
compatible, learning may not be completed and
an error message may appear.
R Registering/Changing the functions
1 Display the <System> setting screen.
2 Display the <Steering Remote Control
Setting> screen.
• Press [K] repeatedly to change the page on
the <System> menu screen.
3 Press a steering remote controller button
to register/change.
• The unit can register/change all of the button’s
functions at the same time. To do this, press each
button in turn and after pressing all of them,
press [Done] in the <Steering Remote Control
Setting> screen. However, new functions cannot
be learned after this operation.
• When changing the functions already learned,
touch the button you want to change in step 3
and then touch to select the new function from
the function list.
• Confirm the contents of the settable functions in
the function list. You cannot edit the function list.
R Initializing the settings
1 Display the <System> setting screen. (See
the far left column.)
4 Select a function to assign.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2
• You can change the page to display more
items by pressing [J]/[K].
5 Repeat steps 3 and 4 as necessary.
6 Finish the procedure.
3
• To cancel the initialization, press [No].
ENGLISH
DDX_Mid_K.indb 65
65
2014/12/06 15:22
CONNECTION/INSTALLATION
Before installing the unit
V WARNING
• If you connect the ignition wire (red) and the
battery wire (yellow) to the car chassis (ground),
you may cause a short circuit, that in turn may
start a fire. Always connect those wires to the
power source running through the fuse box.
• Do not cut out the fuse from the ignition wire (red)
and the battery wire (yellow). The power supply
must be connected to the wires via the fuse.
V Precautions on installation and connection
• Mounting and wiring this product requires
skills and experience. For best safety, leave the
mounting and wiring work to professionals.
• Make sure to ground the unit to a negative 12 V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
• If the power is not turned on (“Miswiring DC Offset
Error”, “Warning DC Offset Error” is displayed),
the speaker wire may have a short circuit or
have touched the chassis of the vehicle and the
protection function may have been activated.
Therefore, the speaker wire should be checked.
• If your car’s ignition does not have an ACC
position, connect the ignition wires to a power
source that can be turned on and off with the
ignition key. If you connect the ignition wire to a
power source with a constant voltage supply, such
as with battery wires, the battery may be drained.
• Only for DDX7015BT/DDX715WBT:
If the console has a lid, make sure to install the
unit so that the monitor panel will not hit the lid
when closing and opening.
• If the fuse blows, first make sure the wires are not
touching to cause a short circuit, then replace the
old fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short circuit,
do not remove the caps on the ends of the
unconnected wires or the terminals.
• Connect the speaker wires correctly to the
terminals to which they correspond. The unit may
be damaged or fail to work if you share the [
wires or ground them to any metal part in the car.
• When only two speakers are being connected to
the system, connect both connectors either to
the front output terminals or to the rear output
terminals (do not mix front and rear). For example,
if you connect the ] connector of the left speaker
to a front output terminal, do not connect the [
connector to a rear output terminal.
• After the unit is installed, check whether the brake
lamps, blinkers, wipers, etc. on the car are working
properly.
• Mount the unit so that the mounting angle is 30°
or less.
• Do not press hard on the panel surface when
installing the unit in the vehicle. Otherwise
scratches, damage, or failure may result.
• This unit has a cooling fan to decrease the
internal temperature. Do not mount the unit
in a place where the cooling fan of the unit is
blocked. Blocking these openings will prevent the
cooling of the internal temperature and result in
malfunction.
Cooling fan
•
V CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal parts such as
the heat sink and enclosure become hot.
R Supplied accessories for installation
1
2
3
4
5
6
7
8
9
0
-
Wiring harness x 1
Trim plate x 1*1
Extension wire (2 m) x 1
Extraction keys x 2*1
Flat head screws (M5 x 7 mm) x 6*1
Round head screws (M5 x 6 mm) x 6
Antenna extension cable x 1*2
Steering Remote cable x 1*3
Microphone (3 m) x 1
Fixture for HDMI/MHL connector x 1
Screws for the fixture (M2.6 x 6 mm) x 1
*1 Only for DDX7015BT/DDX5902.
*2 Only for DDX715WBT.
*3 Only for DDX7015BT/DDX715WBT.
66
DDX_Mid_K.indb 66
2014/12/06 15:22
CONNECTION/INSTALLATION
R Installation procedure
1 To prevent a short circuit, remove the key
2
3
4
5
6
from the ignition and disconnect the ·
battery.
Make the proper input and output wire
connections for each unit.
Connect the speaker wires of the wiring
harness.
Connect the wiring harness wires in the
following order: ground, battery, ignition.
Connect the wiring harness connector to
the unit.
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (e.g., the sound may skip).
7 Reconnect the · battery.
8 Press the reset button.
9 Configure <Initial Setup>. (Page 4)
R Installing the trim plate (Only for
DDX7015BT/DDX5902)
Installing the unit
R Installing the unit (Only for
DDX7015BT/DDX5902)
1 Attach the trim plate (2).
2
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
R When installing the unit using the
mounting bracket removed from the
car
5 or 6
Car Bracket
5 or 6
• Select the appropriate type of screw for the
mounting bracket: flat head (5) or round head
(6).
ENGLISH
DDX_Mid_K.indb 67
67
2014/12/06 15:22
CONNECTION/INSTALLATION
Connection
R Connecting wires to terminals (for DDX7015BT/DDX5902)
Page 72
Pages 70 – 71
Pages 70 – 71
USB terminal (0.8 m):
Pages 70 – 71
Purple with white stripe
(Reverse sensor wire)
Connect the antenna
cord to the antenna
terminal.
1
10 A fuse
Connect to the vehicle’s steering remote harness.
Contact your Kenwood dealer for details.*1
8
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Light green (Parking
sensor wire)
Connect SiriusXM Connect Vehicle Tuner
(commercially available). See page 71.*2
White ª / White with black stripe · : To front speaker (left)
Green ª / Green with black stripe · : To rear speaker (left)
Purple ª / Purple with black stripe · : To rear speaker (right)
Blue (Antenna control wire)
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
*1 Only for DDX7015BT.
*2 Only for DDX5902.
*3 If no connections are made, do not let the cable come out from the
tab.
Gray ª / Gray with black stripe · : To front speaker (right)
*3
Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster
amplifier of the film-type antenna. (Max. 300 mA, 12 V)
When using the optional power amplifier, connect to its power control terminal.
Blue with white stripe (Power control wire)
Not used.
Brown (Mute control wire)
To use the steering wheel remote control feature, an exclusive remote adapter
(not supplied) matching your car is required.
Light blue with yellow stripe (Steering remote control wire)
To car light control switch
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
3
Ignition key switch
(ACC)
Yellow (Battery wire)
(BATT)
Black (Ground wire)
(GND)
Fuse box
To car chassis
Battery
68
DDX_Mid_K.indb 68
2014/12/06 15:22
CONNECTION/INSTALLATION
R Connecting wires to terminals for Toyota Cars (for DDX715WBT)
D21
Page 72
Pages 70 – 71
Pages 70 – 71
USB terminal (0.8 m):
Pages 70 – 71
Connector D
8
Purple with white stripe
(Reverse sensor wire)
Connect the antenna
cord to the antenna
terminal.
10 A fuse
1
Light green (Parking
sensor wire)
*1
When using the optional power amplifier, connect
to its power control terminal.
Blue with white stripe
(Power control wire)
Brown (Mute control wire)
Not used.
Connector B
Connect to vehicle’s harness.
Connector A
Connect to vehicle’s harness.
Connector C
*2
C5
7
D22
D23
Connect to the vehicle’s steering remote
harness.
• Depending on the type of vehicle, it cannot
be connected.
Connect to vehicle’s harness.
• Depending on the type of vehicle, it
cannot be connected. In this case, connect
the JASO plug directly to the unit.
Pin
A1
A2
A4
A5
A6
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
3
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Color and functions of Connector A, B, C and D
Orange/White
Dimmer
Yellow
Battery
Red
Ignition (ACC)
Blue
Antenna control
Black
Ground connection
A8/A7 White ª / White/Black ·
A10/A9 Gray ª / Gray/Black ·
B2/B1 Green ª / Green/Black ·
B6/B5
C5
D21
D22
D23
Purple ª / Purple/Black ·
Blue
Light green/Red
Purple/Red
Gray/Red
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Antenna control
Input 1
Input 2
Ground
*1 If no connections are made, do not let the cable come out from the tab.
*2 When using Antenna Control, connect ANT CONT lead (blue) to A5 (blue) on the wiring harness.
ENGLISH
DDX_Mid_K.indb 69
69
2014/12/06 15:22
CONNECTION/INSTALLATION
R Connecting a USB device
USB device*
(commercially available)
R Connecting an iPod/iPhone
iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/
iPhone 5S/iPhone 5C/iPhone 5
(commercially available)
iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5
(commercially available)
0.8 m
KCA-iP102
(optional accessory)
KCA-iP202
(optional accessory)
* Use CA-U1EX to extend the cable if necessary. (Max 500 mA, 5V)
KCA-iP103
(optional accessory)
0.8 m
0.8 m
1.8 m
0.8 m
0.8 m
Lightning-Digital AV
adapter (accessory of the
iPod/iPhone)
1.8 m
KCA-iP103
(optional accessory)
KCA-HD100
(optional accessory)
0.8 m
If you connect the HDMI/MHL connector, fix the HDMI/MHL
cable using the fixture (0) and screw (-).
0
HDMI/MHL cable
70
DDX_Mid_K.indb 70
2014/12/06 15:22
CONNECTION/INSTALLATION
R Connecting a smartphone
Android, etc.
(with HDMI)
(commercially available)
Android, etc.
(with MHL)
(commercially available)
R Connecting the Miracast Dongle to
use smartphone/iPod/iPhone over a
wireless connection
Miracast Dongle: KCA-WL100
(optional accessory)
1
2
3
4
5
6
7
Micro USB
8
Micro HDMI (Type D)
KCA-MH100
(optional accessory)*
Micro USB
to USB cable
(commercially
available)
Micro HDMI to HDMI
adapter (commercially
available)
p
R Connecting external components
1.8 m
0.8 m
KCA-HD100
(optional accessory)
9
1.8 m
q
AV-OUT/Video output (Yellow)
Rear view camera input (Yellow)
Audio Video input (AV-IN1)*1
iPod/Audio Video input (iPod/AV-IN2)*1
iDatalink input for connecting ADS adapter
(commercially available)*2
HDMI/MHL input
Subwoofer preout (monaural output)*3
• Subwoofer left output (White)
• Subwoofer right output (Red)
Rear preout*3
• Audio left output (White)
• Audio right output (Red)
Front preout*3
• Audio left output (White)
• Audio right output (Red)
Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
Expansion port for connecting SiriusXM Connect
Vehicle Tuner (commercially available)*2
*1 When connecting the component to play on “AV-IN1” or “AVIN2”, use the Audio and Video cable CA-C3AV (optional accessory).
*2 Only for DDX5902.
*3 When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
If you connect the HDMI/MHL connector, fix the HDMI/MHL
cable using the fixture (0) and screw (-).
0
HDMI/MHL cable
* Use conversion adapter to connect to smartphones if necessary.
ENGLISH
DDX_Mid_K.indb 71
71
2014/12/06 15:22
CONNECTION/INSTALLATION
R Connecting microphone for Bluetooth
Connect the microphone (9) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix it on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
Removing the unit (Only for
DDX7015BT/DDX5902)
R Removing the trim plate
1 Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
R Removing the unit
1 Remove the trim plate. (See the left
column.)
2 Insert the two extraction keys (4), then
pull them as illustrated so that the unit can
be removed.
4
4
2 Remove from the upper two catches.
• Be careful to avoid injury from the catch pins on
the extraction key.
9
• The frame can be removed from the top side in
the same manner.
72
DDX_Mid_K.indb 72
2014/12/06 15:22
REFERENCES
Maintenance
R Caution on cleaning the unit
Do not use any solvent (for example, thinner,
benzine, etc.), detergent, or insecticide. This may
damage the monitor or the unit.
Recommended cleaning method:
Gently wipe the panel with a soft, dry cloth.
R Moisture condensation
Moisture may condense on the lens inside the unit in
the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture evaporates.
R To keep discs clean
Dirty discs may not play correctly.
If a disc does become dirty, wipe it with a soft cloth
in a straight line from the center to the edge.
• Do not use any solvents (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
R To play new discs
New discs may have some rough spots around the
inner and outer edges. If such a disc is used, this unit
may reject the disc.
R How to handle discs
• When removing a disc from its case, press down
the center holder of the case and lift the disc out,
holding it by the edges.
– Always hold the disc by the edges. Do not touch
its recording surface.
• When storing a disc in its case, gently insert the
disc around the center holder (with the printed
surface facing up).
– Make sure to store discs in their cases after use.
• To remove these rough spots, rub the edges with
a pencil or ball-point pen, etc.
More information
R File playback
Playing DivX files (for discs only)*
• This unit can play back DivX files with the
extension code <.divx>, <.div>, or <.avi>
(regardless of the letter case—upper/lower).
• Audio streams should conform to MP3 or Dolby
Digital.
• Files encoded in the interlaced scanning mode
may not be played back correctly.
• The maximum bit rate for video signals (average)
is 8 Mbps.
* Only for DDX7015BT/DDX715WBT.
Playing MPEG1/MPEG2 files
• This unit can play back MPEG1/MPEG2 files with
the extension code <.mpg> or <.mpeg>.
• The stream format should conform to MPEG
system/program stream.
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
• Audio streams should conform to MPEG1 Audio
Layer-2 or Dolby Digital.
Playing JPEG/BMP/PNG files (for USB only)
• This unit can play back picture files with the
extension code <.jpg>, <.jpeg>, <.bmp> or
<.png>.
• This unit can play back files that are at 32 x 32 to
8 192 x 7 680 resolution.
It may take time to display the file depending on
its resolution.
• This unit can play back baseline JPEG files.
Progressive JPEG files or lossless JPEG files cannot
be played.
Continued on the next page...
ENGLISH
DDX_Mid_K.indb 73
73
2014/12/06 15:22
REFERENCES
Playing audio files (for discs: MP3/WMA/AAC, for
USB: MP3/WMA/WAV/AAC/FLAC)
• This unit can play back files with the extension
code <.mp3>, <.wma>, <.wav>, <.m4a> or <.flac>
(regardless of the letter case—upper/lower).
• This unit can play back files that meet the
conditions below:
– Bit rate:
MP3: 8 kbps – 320 kbps
WMA: 48 kbps – 192 kbps
AAC: For discs: 16 kbps – 320 kbps
For USB: 32 kbps – 320 kbps
– Sampling frequency:
MP3: 8 kHz – 48 kHz
WMA: For discs: 32 kHz – 48 kHz
For USB: 8 kHz – 48 kHz
WAV: 44.1 kHz
AAC: 16 kHz – 48 kHz
FLAC : 8 kHz – 48 kHz
• This unit can show ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3).
• This unit can also show WMA/AAC/FLAC Tag.
• This unit can play back files recorded in VBR
(variable bit rate).
• Files recorded in VBR have a discrepancy in
elapsed time indication.
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and MP3 PRO
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless, professional,
and voice format.
– WMA files which are not based upon Windows
Media® Audio.
– WMA/AAC files copy-protected with DRM.
– AAC files encoded using any other application
than iTunes.
– AAC files copy-protected with FairPlay (except
those stored on an iPod).
– Files which have data such as AIFF, ATRAC3, etc.
• This unit can display jacket pictures that meet the
conditions below:
– Picture size: 32 x 32 to 1 232 x 672 (PNG: 800 x
480) resolution
– Data size: less than 650 KB.
– File type: JPEG/PNG/BMP
Playing H.264/WMV files (for USB only)
• This unit can play back files with the extension
code <.mp4>, <.wmv>, <.avi> or <.mkv>.
• This unit can only play back files which are less
than 2 GB.
• The stream format should conform to MPEG
system/program stream.
R Disc playback
Playable disc types
Disc type
DVD
• DTS sound cannot be
reproduced or emitted from
this unit.
DVD Recordable/Rewritable
(DVD-R/-RW*2, +R/+RW*3)
• DVD Video: UDF bridge
• DVD-VR
• DivX*5/MPEG1/MPEG2/MP3/
WMA/AAC: ISO 9660 level 1,
level 2, Romeo, Joliet
Dual Disc
CD/VCD
CD Recordable/Rewritable
(CD-R/-RW)
• ISO 9660 level 1, level 2,
Romeo, Joliet
Recording format,
file type, etc.
DVD Video*1
• DVD Video
• DVD-VR*4
• DivX*5/MPEG1/
MPEG2
• MP3/WMA/AAC
DVD side
• VCD (Video CD)
• Audio CD/
CD Text (CD-DA)
• VCD (Video CD)
• CD-DA
• MPEG1/MPEG2
• MP3/WMA/AAC
*1 DVD Region code:
For DDX5902: 1
For DDX7015BT/DDX715WBT: 4
If you insert a DVD Video disc of an incorrect Region Code, “Region
Code Error” appears on the screen.
*2 DVD-R recorded in multi-border format are also playable (except for
dual layer discs). DVD-RW dual layer discs are not playable.
*3 It is possible to play back finalized +R/+RW (Video format only)
discs. “DVD” is selected as the disc type when a +R/+RW disc is
loaded. +RW double layer discs are not playable.
*4 This unit cannot play back content protected with CPRM.
*5 Only for DDX7015BT/DDX715WBT.
74
DDX_Mid_K.indb 74
2014/12/06 15:22
REFERENCES
Unplayable discs
• Unplayable disc types and formats are as follows:
– DVD-Audio/DVD-ROM discs
– MPEG4/DivX*/JPEG/FLAC/MKV/DVD+VR/DVDRAM recorded on DVD-R/RW or +R/+RW
– SVCD (Super Video CD), CD-ROM, CD-I (CD-I
Ready), DTS-CD
– MPEG4/JPEG/FLAC/MKV recorded on CD-R/RW
• Discs that are not round.
• Discs with coloring on the recording surface or
discs that are dirty.
• Recordable/Rewritable discs that have not been
finalized.
• 3 inch discs. Attempting to insert these discs using
an adapter may cause a malfunction.
* Only for DDX5902.
DualDisc playback
The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of the Non-DVD side of a DualDisc
on this product cannot be recommended.
Playing Recordable/Rewritable discs
• This unit can recognize a total of 64 770 files and
254 folders (a maximum of 255 files per folder).
• Use only “finalized” discs.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped while
playing.
• Some discs or files may not be played back due to
their characteristics or recording conditions.
R About data stored in the connected
USB device/iPod/iPhone
• We bear no responsibility for any loss of data in
iPod/iPhone and USB mass storage class devices
while using this unit.
R USB playback
Playable files on a USB device
• This unit can play the following types of files
stored in a USB mass storage class device.
– JPEG/BMP/PNG/MPEG1/MPEG2/MP3/WMA/
WAV/AAC/FLAC/H.264/WMV (VC-1)
• This unit can recognize a total of 5 000 files and
250 folders (a maximum of 999 files per folder).
• Make sure all important data has been backed up
to avoid losing the data.
Notes on using a USB device:
• This unit may not play back files in a USB device
properly when using a USB extension cable.
• USB devices equipped with special functions such
as data security functions cannot be used with the
unit.
• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be
loose.
• This unit may not recognize a memory card
inserted into the USB card reader.
• When connecting with a USB cable, use the USB
2.0 cable.
• The maximum number of characters (when the
characters are 1 byte):
– Folder names: 128 characters
– File names: 128 characters
• Avoid using the USB device if it might affect
driving safety.
• Do not pull out and connect the USB device
repeatedly while “Reading” is shown on the
screen.
• Electrostatic shock at connecting a USB device
may cause abnormal playback of the device. In this
case, disconnect the USB device then reset this
unit and the USB device.
• Operation and power supply may not work as
intended for some USB devices.
• Do not leave a USB device in the car, or expose to
direct sunlight or high temperatures to prevent
deformation or damage to the device.
ENGLISH
DDX_Mid_K.indb 75
75
2014/12/06 15:22
REFERENCES
R Notes on playing iPod/iPhone
• iPod/iPhone that can be connected to this unit:
Made for
– iPod with video
– iPod classic
– iPod nano (7th Generation)
– iPod nano (6th Generation)
– iPod nano (5th Generation)
– iPod nano (4th Generation)
– iPod nano (3rd Generation)
– iPod touch (5th Generation)
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPod touch (1st Generation)
– iPhone 5S
– iPhone 5C
– iPhone 5
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
• When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following KENWOOD web site:
<www.kenwood.com/cs/ce/ipod>
• For some iPod/iPhone models, the performance
may be abnormal or unstable during operation. In
this case, disconnect the iPod/iPhone device, then
check its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.
• When you turn on this unit, the iPod/iPhone is
charged through the unit.
• The text information may not be displayed
correctly.
R Language codes (for DVD/DVD-VR language selection)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
76
DDX_Mid_K.indb 76
2014/12/06 15:23
REFERENCES
Error message list
If an error occurs while using the unit, a message
appears. Take appropriate action according to the
following message/remedy/cause list.
“No Signal”/“No Video Signal”:
• Start playback on the external component
connected to the AV-IN1 or iPod/AV-IN2 input
terminal.
• Start playback on the smartphone connected to
HDMI/MHL input terminal.
• Check the cords and connections.
• Signal input is too weak.
“Miswiring DC Offset Error”/“Warning DC Offset
Error”:
• A speaker cord has shorted or it has come into
contact with the car chassis. Wire or insulate the
speaker cord as appropriate, then reset the unit.
(Pages 3 and 67)
“Parking off”:
• No playback picture is shown when the parking
brake is not engaged.
“Authorization Error”:
• Check whether the connected iPod/iPhone is
compatible with this unit. (Page 76)
“USB Device Error”:
• The USB power voltage is abnormal.
• Turn off and turn on the unit.
• Connect another USB device.
“Panel Mecha Error”:
• The panel does not work properly. Reset the unit.
“Connection Error”:
• The device is registered but the connection has
failed. Connect the registered device. (Page 46)
“Please Wait...”:
• The unit is preparing to use the Bluetooth
function. If the message does not disappear, turn
off and turn on the unit, then connect the device
again (or reset the unit).
“No Voice Device”:
• The connected mobile phone does not have a
voice recognition system.
“No Data”:
• No phone book data is contained in the connected
Bluetooth phone.
“Initialize Error”:
• The unit has failed to initialize the Bluetooth
module. Try the operation again.
“Dial Error”:
• Dialing has failed. Try the operation again.
“Hung Up Error”:
• The call has not ended yet. Park your car, and use
the connected mobile phone to end the call.
“Not logged in”:
• You are not logged in.
“Request time out”:
• A network (WiFi connection, server) error has
occurred.
“Station not selected”:
• No station is selected.
“Station cannot be saved”/“Station cannot be
created”/“Station cannot be deleted”:
• The station cannot be saved, created, or deleted.
“Please update Pandora App”:
• The Pandora application on your iPod touch/
iPhone/Android/BlackBerry is not the latest
version. Update the application.
“Please check device.”:
• The Pandora application on your iPod touch/
iPhone/Android/BlackBerry is not started up.
• The Pandora application is not installed in the
connected device.
• An error has occurred on the Pandora application.
“Login Error”:
• You have not been signed into Pandora.
“Pick Up Error”:
• The unit has failed to receive a call.
“No skips remaining”:
• No more songs can be skipped.
“Disconnected”:
• The device is not connected.
“Failed to save your thumb rating”:
• Thumb-up/down is prohibited.
“Check device”:
• The application is not active.
“No Station”:
• No station is available.
“Check application”:
• A connection to the application cannot be
established.
“No Active Station”:
• No station is being played.
ENGLISH
DDX_Mid_K.indb 77
77
2014/12/06 15:23
REFERENCES
“Station limit reached”:
• The Station List is full and no more stations can be
registered.
“SXM Check Tuner”:
• Make sure the SiriusXM Connect Vehicle Tuner is
connected to the unit.
“Failed to save your bookmark”:
• The unit has failed to save a bookmark. Try the
operation again.
“SXM Chan Unavailable” (appears on the screen
for about 2 seconds, then returns to the previous
channel):
• The selected channel is no longer available. Select
another channel or continue listening to the
previous channel.
“Limited Connectivity”:
• The connection with the Pandora application
cannot be established.
“Pandora not available”:
• You cannot use the Pandora application from
the area where you are currently trying to access
Pandora.
“Try again later”:
• The Pandora server is under maintenance.
“SXM Ch Unsubscribed” (appears on the screen
for about 2 seconds, then returns to the previous
channel):
• The selected channel is not part of your current
subscription plan. Call 1-866-635-2349 to
subscribe.
“Station does not exist”:
• The selected station has been deleted by another
device or has expired.
“SXM Subscription Updated – Press Enter to
Continue”:
• Your subscription has been updated. Press the
appropriate button to continue.
“Cannot create a Station”:
• You cannot create a station during the readonly mode or when network connection is not
established.
“SXM Channel Locked”
• The selected channel has been locked by the
parental controls. Enter the unlock code when you
are asked. (Page 39)
“SXM No Signal”:
• Make sure the SiriusXM Satellite Radio antenna is
mounted outside the vehicle. Move the vehicle to
an area with a clear view of the sky.
“SXM Incorrect Lock Code”
• The selected channel is a mature or parental lock
channel, and locked by the parental lock or user
lock code. Enter the correct lock code.
Troubleshooting
What appears to be trouble is not always serious.
Check the following points before calling a service
center.
• For operations with the external components,
refer also to the instructions supplied with the
adapters used for the connections (as well as
the instructions supplied with the external
components).
R General
No sound comes out of the speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
No picture is displayed on the screen.
• Turn on the screen. (Page 9)
The unit does not work at all.
• Reset the unit. (Page 3)
The remote controller* does not work.
• Replace the battery.
* For DDX5902: Purchase KNA-RCDV331 separately.
“SXM Check Antenna”:
• Check the SiriusXM Satellite Radio antenna
connection, and make sure the antenna is firmly
attached to the tuner.
• Check whether the SiriusXM Satellite Radio
antenna cable is bent or broken. If it is damaged,
replace the whole antenna unit.
78
DDX_Mid_K.indb 78
2014/12/06 15:23
REFERENCES
R Discs
Recordable/Rewritable discs cannot be played
back.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Playback does not start.
• The format of files is not supported by the unit.
No picture appears on the external monitor.
• Connect the video cord correctly.
• Select the correct input on the external monitor.
DivX*/MPEG1/MPEG2/MP3/WMA/AAC discs
cannot be played back.
• Record the tracks using a compatible application
on the appropriate discs. (Page 74)
• Add appropriate extension codes to the file
names.
Tracks on the Recordable/Rewritable discs are
not played back as you have intended them to
play.
• Playback order may differ from the one played
back using other players.
* Only for DDX7015BT/DDX715WBT.
R USB
“Reading” does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
R iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing artwork.
• Operate the unit after the artwork has loaded.
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPod nano
(7th Generation)/iPod touch (5th Generation)/
iPhone 5S/iPhone 5C/iPhone 5 or KCA-HD100 and
KCA-iP103 through a Lightning-Digital AV adapter
for iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5. Other
cables cannot be used.
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPod nano
(7th Generation)/iPod touch (5th Generation)/
iPhone 5S/iPhone 5C/iPhone 5 or KCA-HD100 and
KCA-iP103 through a Lightning-Digital AV adapter
for iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5. Other
cables cannot be used.
R Tuner
AME automatic presetting does not work.
• Store stations manually. (Page 30)
Static noise while listening to the radio.
• Connect the antenna firmly.
R AV-IN1/AV-IN2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
R HD Radio reception (only for DDX5902)
Sound quality changes when receiving HD Radio
stations.
• Fix the reception mode either to <Digital> or
<Analog>. (Page 32)
No sound can be heard.
• The HD Radio reception mode is not appropriate.
Select the appropriate mode from <Digital>,
<Analog> or <Auto>.
ENGLISH
DDX_Mid_K.indb 79
79
2014/12/06 15:23
REFERENCES
R iHeartRADIO*/Pandora*/AUPEO!
The application does not work.
• The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
* Only for DDX5902.
R Bluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
The Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.
• For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page 45)
• For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try “0000” or “1234.”
• Turn off, then turn on the Bluetooth device.
Echo or noise occurs.
• Adjust the microphone unit position.
• Adjust the echo volume or noise reduction
volume. (Page 47)
The unit does not respond when you try to copy
the phone book to the unit.
• You may have tried to copy the same entries (as
stored) to the unit.
Specifications
R Monitor section
Picture Size (W x H)
DDX7015BT/DDX715WBT:
6.95 inches (diagonal) wide
156.6 mm × 81.6 mm (6-3/16" x
3-3/16")
DDX5902:
6.2 inches (diagonal) wide
137.5 mm × 77.2 mm (5-7/16" ×
3-1/16")
Display System
Transparent TN LCD panel
Drive System
TFT active matrix system
Number of Pixels 1 152 000 (800H × 480V × RGB)
Effective Pixels
99.99%
Pixel Arrangement
RGB striped arrangement
Back Lighting
LED
R DVD player section
D/A Converter
Audio Decoder
24 bit
Linear PCM/Dolby Digital/MP3/
WMA/AAC
Video Decoder
MPEG1/MPEG2/DivX*
Wow & Flutter
Below Measurable Limit
Frequency Response
96 kHz Sampling: 20 Hz to 20 000 Hz
48 kHz Sampling: 20 Hz to 20 000 Hz
44.1 kHz Sampling: 20 Hz to 20 000 Hz
Total Harmonic Distortion
0.010% (1 kHz)
Signal to Noise Ratio
94 dB (DVD-Video 96 kHz)
Dynamic Range
Disc Format
91 dB (DVD-Video 96 kHz)
DVD-Video/DVD-VR/VIDEO-CD/
CD-DA
Sampling Frequency
44.1 kHz/48 kHz/96 kHz
Quantifying Bit Number
16/20/24 bit
* Only for DDX7015BT/DDX715WBT.
R USB interface section
USB Standard
USB 2.0 High Speed
File System
FAT 16/32
Maximum Power Supply Current
DC 5 V 1 A
D/A Converter
Audio Decoder
Video Decoder
24 bit
MP3/WMA/AAC/WAV/FLAC
MPEG1/MPEG2/H.264/WMV/
JPEG/BMP/PNG
80
DDX_Mid_K.indb 80
2014/12/06 15:23
REFERENCES
R HDMI interface section
R DSP section
R FM tuner section
Connector Type
Graphics equalizer
DDX5902:
BAND
7 Band
Frequency (Hz) (BAND1-7)
62.5/160/400/1k/2.5k/6.3k/16k
Gain
–9/–8/–7/–6/–5/–4/–3/–2/
–1/0/1/2/3/4/5/6/7/8/9 dB
DDX7015BT/DDX715WBT:
BAND
5 Band
Frequency (Hz) (BAND1-5)
62.5/250/1k/4k/16k
Gain
-9/-8/-7/-6/-5/-4/-3/-2/
-1/0/1/2/3/4/5/6/7/8/9 dB
Frequency Range
DDX5902:
87.9 MHz to 107.9 MHz (200 kHz)
DDX7015BT/DDX715WBT:
87.5 MHz to 108.0 MHz (50 kHz)
TYPE-A
R MHL interface section
Supported Version
MHL 2
Maximum Power Supply Current
DC 5 V 900 mA
R Bluetooth section
Technology
Frequency
Output Power
Bluetooth 3.0 + EDR
2.402 GHz to 2.480 GHz
+4 dBm (MAX), 0 dBm (AVE),
Power Class 2
Maximum Communication Range
Line of sight approx. 10 m
(32.8 ft)
Audio Codec
Profile
SBC/AAC/MP3/aptX/aptX Sprint*
HFP (Hands Free Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
GAP (Generic Access Profile)
PBAP (Phonebook Access Profile)
SDP (Service Discovery Profile)
SPP (Serial Port Profile)
* aptX/aptX Sprint are compatible only with DDX5902.
2 Way X'Over
HIGH PASS FILTER frequency
Through/50/60/80/100/120/150/
180/220
SLOPE
–6/–12/–18/–24 dB/Oct.
LOW PASS FILTER frequency
50/60/80/100/120/Through
SLOPE
–6/–12/–18/–24 dB/Oct.
Position
Front/Rear/Subwoofer Delay
0 ft to 20.0 ft (0.07 ft Step)
Gain
–8 dB to 0 dB
Subwoofer Level
–50 dB to +10 dB
Usable Sensitivity (S/N: 30 dB)
7.2 dBf (0.63 μV/75 Ω)
Quieting Sensitivity (S/N: 50 dB)
15.2 dBf (1.58 μV/75 Ω)
Frequency Response (±3.0 dB)
Digital:
20 Hz to 20 kHz*
Analog:
30 Hz to 15 kHz
Signal to Noise Ratio
Digital:
75 dB (STEREO)*
Analog:
68 dB (MONO)
Selectivity (±400 kHz)
≥ 80 dB
Stereo Separation 40 dB (1 kHz)
* Only for DDX5902.
R AM tuner section
Frequency Range (10 kHz)
530 kHz to 1 700 kHz
Usable Sensitivity 29 dBμ
Frequency Response (±3.0 dB)
Digital:
40 Hz to 15 kHz*
Signal to Noise Ratio
Digital:
75 dB (STEREO)*
* Only for DDX5902.
ENGLISH
DDX_Mid_K.indb 81
81
2014/12/06 15:23
REFERENCES
R Video section
R General
Color System of External Video Input
NTSC/PAL
Operating Voltage
External Video Input Level (mini jack)
1 Vp-p/75 Ω
Maximum Current Consumption
10 A
External Audio Max Input Level (mini jack)
2 V/25 kΩ
R Audio section
Installation Dimensions (W × H × D)
DDX7015BT/DDX5902:
182 mm × 112 mm × 157 mm
(7-3/16" × 4-7/16" × 6-3/16")
DDX715WBT:
178 mm × 100 mm × 159 mm
(7" × 3-15/16" × 6-5/16")
206 mm × 104 mm × 159 mm
(including the sub panel part)
Maximum Power (Front & Rear)
50 W × 4
Operational Temperature Range
–10°C to +60°C
Tipical Power Output
Full Bandwidth Power
(at less than 1%THD)
22 W × 4
Weight
DDX7015BT:
DDX5902:
DDX715WBT:
Preout Level
DDX5902:
5 V/10 kΩ
DDX7015BT/DDX715WBT:
4 V/10 kΩ
Design and specifications are subject to change
without notice.
Preout Impedance
DDX5902:
≤ 250 Ω
DDX7015BT/DDX715WBT:
≤ 600 Ω
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• “DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation registered in the US, Japan
and other countries.
• The “AAC” logo is a trademark of Dolby
Laboratories.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Video Output Level (RCA jacks)
1 Vp-p/75 Ω
Audio Output Level (mini jacks)
1.2 V/10 kΩ
Speaker Impedance
4 Ω to 8 Ω
14.4 V (10.5 V to 16 V allowable)
2.5 kg (5.5 lbs)
2.0 kg (4.4 lbs)
2.6 kg (5.7 lbs)
R Trademarks and licenses
• “Made for iPod,” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod, or iPhone,
respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the use
of this accessory with iPod, or iPhone may affect
wireless performance. iPhone, iPod, iPod classic,
iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other
countries.
• Lightning is a trademark of Apple Inc.
• This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
• Font for this product is designed by Ricoh.
• THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE
OF A CONSUMER FOR (i) ENCODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG LA,
LLC. SEE HTTP://WWW.MPEGLA.COM.
82
DDX_Mid_K.indb 82
2014/12/06 15:23
REFERENCES
• THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE PERSONAL
USE OF A CONSUMER OR OTHER USES IN WHICH
IT DOES NOT RECEIVE REMUNERATION TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD ("AVC VIDEO") AND/OR (ii) DECODE
AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.
COM
• Pandora, the Pandora logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
• HD Radio Technology manufactured under license
from iBiquity Digital Corporation. U.S. and Foreign
Patents. HD Radio™ and the HD, HD Radio, and
“Arc” logos are proprietary trademarks of iBiquity
Digital Corp.
• Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights
reserved.
• Android is a trademark of Google Inc.
• BlackBerry®, RIM®, Research In Motion® and related
trademarks, names and logos are the property
of Research In Motion Limited and are registered
and/or used in the U.S. and countries around
the world. Used under license from Research In
Motion Limited.
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by JVC KENWOOD
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
• MHL and the MHL logo are a trademark or
registered trademark of MHL, LLC.
- Incorporates MHL 2
• iHeartRadio® is a registered mark of Clear Channel
Broadcasting, Inc. in the United States and other
countries. Such marks are used under license.
• libFLAC
Copyright (C) 2000,2001,2002,2003,2004,2005,200
6,2007,2008,2009 Josh Coalson
Redistribution and use in source and binary forms,
with or without modification, are permitted
provided that the following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions
and the following disclaimer.
– Redistributions in binary form must reproduce
the above copyright notice, this list of
conditions and the following disclaimer in the
documentation and/or other materials provided
with the distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used
to endorse or promote products derived from
this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
• “aupeo” is a trade mark of Aupeo Ltd.
• The aptX® software is copyright CSR plc or its
group companies. All rights reserved. The aptX®
mark and the aptX logo are trade marks of CSR
plc or one of its group companies and may be
registered in one or more jurisdictions.
DIVX
• This DivX Certified® device has passed rigorous
testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your
device at vod.divx.com. Find your registration
code in the DivX VOD section of your device setup
menu. (Page 62)
• DivX Certified® to play DivX® video, including
premium content.
• DivX®, DivX Certified® and associated logos are
trademarks of DivX, LLC and are used under
license.
ENGLISH
DDX_Mid_K.indb 83
83
2014/12/06 15:23
DDX_Mid_K.indb 1
2014/12/06 15:23