MB880 INDOOR CYCLE OWNER`S MANUAL
MB880
GROUP
EXERCISE
BIKE
MB880
INDOOR
CYCLE
MB880OWNER’S
GROUP EXERCISE
BIKE
MANUAL
OWNER’S MANUAL
OWNER’S MANUAL
Table of Contents
Product Registration
1
Important Safety Instructions
2
Important Operation Instructions
3
MB880 Assembly Instructions
5
Operation of Your New Indoor Cycle
10
Troubleshooting
16
Manufacturer’s Limited Warranty
17
ATTENTION
THIS INDOOR CYCLE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS
WARRANTY IN ITS ENTIRETY.
Congratulations On Your New Indoor Cycle and Welcome to the XTERRA Fitness Family!
Thank you for your purchase of this quality indoor cycle. Your new indoor cycle has been
manufactured by one of the leading fitness manufacturers in the world and is backed by one
of the most comprehensive warranties available. XTERRA Fitness will do all we can to make
your ownership experience as pleasant as possible for many years to come.
If you have any questions about your new product or questions about the warranty contact
XTERRA Fitness at 1-800-258-8511. If you have a technical problem with your new indoor
cycle contact XTERRA Fitness technical service at 800-258-8511.
Please take a moment at this time to record below the name of the dealer, their telephone
number, and the date of purchase for easy contact in the future. We appreciate your
confidence in XTERRA Fitness and we will always remember that you are the reason that we
are in business. Please complete and mail your registration card today and enjoy your new
indoor cycle.
Yours in Health,
XTERRA Fitness
Name of Dealer
Telephone Number of Dealer
Purchase Date
Product Registration
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product
in the space provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to
XTERRA Fitness. You can also go to www.xterrafitness.com/warrantyreg.html
to register online.
MB880 GROUP EXERCISE BIKE
OWNER’S MANUAL
1
MB880_20120111
MB880 Indoor Cycle
Important Safety Instructions
WARNING - Read all instructions before using this appliance.
1. Use this equipment only for its intended use as described in this manual. Do not
attempt to ride this bike at high pedal speeds until you have ridden the bike for some
time and are comfortable riding at slower pedal speeds.
2. The bike is NOT equipped with a freewheel system which means that when the
flywheel is in motion, the pedals will be in motion. Do not attempt to stop the unit by
applying backward pressure to pedals while they are turning as knee injury may occur.
Do not attempt to remove your feet from pedals while they are moving.
3. Wait for flywheel to coast to a stop before dismounting the bike. If you want to stop the
flywheel, push down on the brake knob.
4. Serious injury or death may occur from over-training. Consult a medical doctor or
qualified fitness instructor to determine an exercise program appropriate for your level
of fitness.
5. Do not attempt to turn the pedal cranks by hand. Do not touch any driving mechanism
while it is in motion as possible injury could occur.
6. In a home setting, keep children away from the bike when it is not in use. Keep
children and pets away from the unit while it is in use.
7. Do not attempt to perform dip movements on handlebars.
8. Never drop or insert any object into any opening of the bike.
9. Only use the bike on a stable, level floor.
10.Follow instructions for safe use of the equipment including proper seat position,
handlebar position, and use of foot positioning system of pedals. Do not attempt to
pull up handlebar post and seat post over the ‘MAX.’ graduation.
11.For safe operation, allow for at least 1foot (30cm) of free space to either side of the
unit and 2 feet (60cm) of free space to the rear of the unit.
Regularly examine the bike for damage and wear. Inoperable components should be
replaced immediately or the equipment should not be used until it is repaired.
Failure to follow all guidelines may compromise the effectiveness of the exercise
experience, expose yourself (and possibly others) to injury, and reduce the longevity
of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
MB880 Indoor Cycle
2
Important Operation Instructions
WARNING - AS THE OWNER OF THIS EXERCISE EQUIPMENT, YOU SHOULD
INSIST THAT ALL USERS FOLLOW THE SAME GUIDELINES: YOU SHOULD MAKE
THIS MANUAL AVAILABLE TO ALL USERS.
1. Obtain a complete physical examination from your medical doctor and enlist a health/
fitness professional’s aid in developing an exercise program suitable for your current
health status.
2. When working out for the first time, start out slowly for a minimum of five minutes.
After your muscles are warmed up, gradually increase the pedaling speed and/or
resistance.
3. The speed and duration of your exercise program should always be subject to how
you feel. Never permit peer pressure to exceed your personal judgment while
exercising.
4. Overweight or severely de-conditioned individuals should be particularly cautious
when using the equipment for the first time. Even though such individuals may not
have histories of serious physical problems, they may perceive the exercise to be far
less intense than it
really is, resulting in the possibility of overexertion or injury.
5. Proper installation and regular maintenance are required to ensure user’s safety.
Maintenance is the sole responsibility of the owner.
3
MB880 Indoor Cycle
MB880 Assembly Pack Checklist
HARDWARE STEP 1
#82. 3/8”
Nut (4 pcs)
#81. 3/8” x 3-1/2”
Button Head Socket Bolt (4 pcs)
#83. 3/8” x 23mm
Curved Washer (4 pcs)
HARDWARE STEP 2
#91. M5 x 10mm
Screw (2 pcs)
HARDWARE STEP 3
#49. 5/16”
Split Washer (4 pcs)
#48. 5/16” x 16mm
Flat Washer (4 pcs)
#88. 5/16” x 5/8”
Screw (4 pcs)
ASSEMBLY TOOLS
#85. Wrench
MB880 Indoor Cycle
#86. Combination M5 Allen Wrench
& Phillips Head Screw Driver
4
MB880 Assembly Instructions
PRE-ASSEMBLY
1
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift
Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged
parts are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. Remove the tools first. Remove the hardware for each step as
needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item
number from the assembly drawing for reference.
STABILIZER TUBES
Hardware Step 1
#82. 3/8” Nut (4 pcs)
#81. 3/8” x 3-1/2”
Button Head Socket
Bolt (4 pcs)
#83. 3/8” x 23mm
Curved Washer
(4 pcs)
82
83
81
82
83
81
2
1. Attach the Front ( the one with the wheels mounted in the bottom of the
tube) & Rear floor stabilizer tubes by inserting two Button Head Socket
Bolts (81) through each tube. Fasten two Curved Washers (83) and two
Nuts (82) on each tube using the wrench (85) provided.
REAR STABILIZER COVER
Hardware Step 2
#91. M5 x 10mm
Screw (2 pcs)
91
1. Attach the Rear Stabilizer cover with two Screws (91). Tighten using the
Combination M5 Allen Wrench & Phillips Head Screw Driver (86).
5
MB880 Indoor Cycle
3
HANDLEBAR
Hardware Step 3
#49. 5/16” Split
Washer (4 pcs)
#48. 5/16” x 16mm
Flat Washer (4 pcs)
#88. 5/16” x 5/8”
Screw (4 pcs)
1. Attach the handlebars (make sure they are oriented as in the illustration)
with four Screws (88), four Split Washers (49), and four Flat Washers
(48). Tighten firmly using the Combination M5 Allen Wrench & Phillips
Head Screw Driver (86).
4
WATER BOTTLE HOLDER
1. Place the water bottle slightly to the right of center when looking at the
bike from the rear.
MB880 Indoor Cycle
6
5
LEFT/RIGHT PEDALS
25(R)
25(L)
1. Attach the Right and Left pedals to the appropriate crank. The
pedals have an “R” and an “L” stamped on the end of the threaded
area to distinguish them. Check the illustrations to make sure you are
attaching each to the correct side. Note: the left side has left hand
threads; therefore you will screw it on in a counterclockwise direction.
Tighten each pedal as firmly as possible with the Wrench (85) provided.
If you here a thumping sound when you are pedaling, this usually means
one or both pedals are loose. You may need to retighten them after use.
7
MB880 Indoor Cycle
6
CONSOLE
1
2
3
4
1 – Console
2 – Mounting Clamp
3 – Clamp mounting screw
4 – Clamping thumb screw
5 – Velcro
6 – Speed transmitter
6
MB880 Indoor Cycle
8
5
XTERRA Fitness Indoor Cycling Console Battery Installation:
1. Remove the battery cover from the back of the computer.
2. Insert 2 AAA batteries into the battery compartment and reinstall the battery cover.
3. When Battery working voltage is too low, The “Low battery” indicator will show up on
the console display indicating it is time to change the batteries.
Speed Sensor Transmitter Battery Installation
1. Remove the battery cover from the transmitter.
2. Install 2 AAA batteries in the battery compartment and reinstall the battery cover.
3. When new batteries are installed in the transmitter or console you must perform the
synchronizing procedure below for the console to work properly
Synchronizing the transmitter to the console:
After installing the batteries, and before attaching the console and transmitter to the bike,
you must synchronize the two so they can ‘talk’ to each other.
1. Press and hold the two keys on the front of the console for about 3 seconds until the
display shows ID - 2. Now press and hold the blue button on the transmitter for 3 seconds and release. The
console display should show ID 0. NOTE: You must press the blue button within 10
seconds after the console is showing ID - - otherwise the console will show: ID ER. If
the console shows this error then restart the procedure again.
3. It may be necessary to remove and re-install the batteries in both the
console and transmitter if you continue to receive an error.
Console Installation:
1. Install the mounting clamp (2) to the back of the console (1) with the clamp mounting
screw (3).
2. Install and slightly tighten the thumb screw (4) then adjust the console angle for
optimal visibility. Once the console is adjusted, continue to tighten the screw until it is
securely
attached to the handle bar.
Transmitter Installation:
• Make sure to route the speed sensor wire behind the frame member. Plug the sensor
wire into the transmitter as shown below
• Install the transmitter, at the angle shown below, onto the pre-installed Velcro strip
located on the back of the chain cover. Make sure the sensor wire connection is at
the top left when mounting the transmitter.
• Make sure the sensor wire is routed away from the spinning flywheel
9
MB880 Indoor Cycle
Operation of Your Indoor Cycle
GETTING FAMILIAR WITH THE CONTROL PANEL
MB880 Console
PLEASE NOTE:
1. The XTERRA Fitness Indoor Cycling Console system is designed as a sealed unit and not meant to be
opened other than for the sole purpose of installing batteries. Any opened units will void the warranty.
2. To clean the XTERRA Fitness Indoor Cycling Console use a clean damp cloth. Use of any caustic
cleaning solutions will void the warranty.
3. The XTERRA Fitness Indoor Cycling Console system is NOT waterproof, only water resistant. Any
excessive exposure to water will void the warranty.
The XTERRA Fitness Indoor Cycling Console carton consists of a computer console and a speed sensor
transmitter. The transmitter counts the number of times the magnet, which is mounted on the crank assembly, passes the sensor. The speed sensor transmitter will then send a coded signal to the console which
contains the measured value (Speed and Cadence ).
MB880 Indoor Cycle
10
Console Operation
Time
Time is measured in min:sec. There is a time of day clock and a workout timer clock. The workout time will
count up or count down during pedaling. If pedaling stops, the time will stop counting after 3sec.
RPM/Cadence
Cadence is the measurement of how fast the cranks are rotating in RPM. The approximate speed of the
bike can also be displayed in MPH or KPH. In addition to MPH/KPH, the RPM section of the display also
has a bar graph that allows the rider to visually keep track of the approximate RPM.
Distance
Distance is the measurement of the virtual distance traveled on the bike. This distance is based on the user
riding a bike with tires that are the same size as the XTERRA Fitness’s flywheel.
KCAL
Kcal is the approximation of calories burned during your work out. The calories are an
estimate only.
Heart Rate
This is the approximation of heart rate detected from the chest strap (sold separately)
during your work out.
Changing from metric to standard data or vice versa
Note: you will have to press the buttons fairly quickly or the screen will return to the prior setting.
1. Press the left key repeatedly until workout DISTANCE is displayed
2. Press and hold the right key down until workout TIME is displayed
3. Press the left key 4x
4. Press the right key one time
5. Press the left key one time
6. Press and hold the left key down until the switch is complete
Quick Start
When the console is in Power Saving Mode, hold down any key to wake up the console and go to the
start-up screen, also called “QUICK Start” active state.
Power Saving Mode
Quick Start Mode
11
MB880 Indoor Cycle
Mode Select
Press the left hand key to select the SPEED, DIST, TIME or CLOCK at the bottom of the
display.
Reset/Heart Rate Alarm Select
1. Press the right hand key to activate the heart rate (this will only
register if you are wearing the chest strap which is sold
separately). If the alarm is on, the alarm icon will flash and a
beep will sound to indicate that your heart rate is either above
or below the selected target zone.
2. To clear exercise TIME, AVG SPEED, AVG PULSE,
DISTANCE, and KCAL, press the left key until TIME is
displayed, then press and hold the right key until data is reset.
Heart Rate Target Zones
1. Press the left hand key until ‘SPEED’ is
displayed, then hold the right hand key
for 3 seconds. The TIME will be flashing; press the left hand key to select the
heart rate target zone settings.
2. Press the right hand key to increase
maximum heart rate limit. After setting
the maximum heart rate, press the left
hand key to adjust the minimum heart
rate limit.
MB880 Indoor Cycle
12
Heart Rate Target Zones
1. GENDER: Press the left hand key until SPEED is displayed, then press the right hand
key for 3 seconds. The TIME will be flashing, press the left hand key until the gender
icon is blinking. Press the right hand key to select gender.
2. Press the left hand key to set the measuring value for weight (Lb or Kg); press the
right hand key to select.
3. BODYWEIGHT: Press the left hand key to set the bodyweight. Press the right hand
key to increase the weight. Press and hold the right hand key for rapid advance.
13
MB880 Indoor Cycle
First Time User Instructions
Adjusting The Bike For A Proper Fit
Take some time to learn how to properly adjust the bike to your body; it will make your
workouts more pleasant and a safer experience too. Riding the bike when it is incorrectly
adjusted can result in discomfort and increase your risk of injury.
Adjustment Of Seat Position
Seat Height Adjustment
1. Standing next to the bike, adjust the seat until it is about hip height.
2. Rotate the crank arms until the pedals are in the vertical position: 12 and 6
o’clock.
3. Place your foot in the toe cage of the pedal closest to the floor and mount the
bike. Ensure that the ball of your foot is over the center of the pedal. Your leg
should be slightly bent at the knee, about 5 degrees.
4. If your leg is too straight or your foot cannot touch the pedal you will need to
lower the seat height. If your leg is bent too much, you will need to raise the
seat height.
5. Dismount the bike. Then loosen the quick release lever on the seat post and
adjust up or down as necessary.
6. When the seat is in the desired position, tighten the quick release to secure
the seat post.
7. Note the final position mark on the seat post for future reference.
Seat Forward/Aft Adjustment
8. Sit on the bike with the crank arms in the 3 and 9 o’clock positions. A proper
forward/aft position (for road bike training) of the seat is achieved when the
small bump at the top of your shin is above the pedal axle.
9. Dismount the bike. Loosen the quick release under the seat and slide the seat
forward or backward as desired; tighten the quick release lever.
Handle Bar Adjustment
Handlebar Height Adjustment
1. The handlebar height is a matter of preference. Start with a handlebar height
that is the same as the seat’s height. Adjusting the handlebar higher will give
the rider a more upright position; lower will result in a more crouched position.
2. Raise or lower the handlebar by loosening the quick release on the handlebar
post and adjust by sliding the handlebar mount up or down as desired. Then
tighten the quick release to secure the handlebar post. Note the final position
mark on the handlebar post for future reference.
Adjustment of Handlebar’s Forward/Aft Position
3. Loosen the quick release under the handlebar and slide the handlebar forward
or backward as desired. A suitable forward/aft position should allow the rider
to
comfortably grasp the handlebar with a slight bend at the elbow.
4. Tighten the quick release to secure the handlebar assembly.
MB880 Indoor Cycle
14
Dual Function Pedals
Adjusting The Pedal Straps
Place your feet in between the aluminum surface of the pedal and the nylon foot strap that
wraps around it. If the opening is too narrow, depress the spring loaded clasp with one
hand and pull on the nylon strap with the other to increase the opening area. If it is too
loose or to tighten the strap, depress the spring loaded clasp, then pull on the open end of
the nylon strap until the strap is snug around each foot.
Using The Cleat Pedals
Engage cleated shoes in pedals by placing cleat between bindings while pushing down.
Disengage by twisting heel outwards away from exercise bike.
Binding tension is adjustable and should be set so that cleat and shoe do not disengage
when pedaling. Use an Allen key to turn tension adjusting screws, clockwise to increase
binding tension, counterclockwise to decrease binding tension.
Basic Operation
Now that you have established a proper riding position, take a few minutes to ride the bike
and determine that your position is comfortable. Start pedaling at a slow pace with your
toes and knees pointed directly forward. Hold the handlebar lightly and in a position that
allows your shoulders and upper body to relax. Pedal easily, at a low resistance until you
feel confident that you could ride in that position for the duration of your workout.
WARNING!
IF AT ANY TIME DURING YOUR WORKOUT, YOU FEEL CHEST PAIN, EXPERIENCE
SEVERE MUSCULAR DISCOMFORT, FEEL FAINT, OR ARE SHORT OF BREATH,
STOP EXERCISING AT ONCE. IF THE CONDITION PERSISTS, YOU SHOULD
CONSULT YOUR MEDICAL DOCTOR IMMEDIATELY.
1. Pedaling resistance is controlled by the tension knob. Resistance can be changed at
any time by turning tension knob: clock-wise for more resistance; counterclockwise for
less resistance.
2. To apply the brake, press down on the tension knob.
3. Before dismounting, apply the brake to stop flywheel, or increase resistance and let
4. flywheel come to a stop.
15
MB880 Indoor Cycle
Troubleshooting
No Display on Console
1. Hold down any key to bring the console to “Quick Start” mode.
2. Ensure that the batteries are installed properly in the console and transmitter. If they
are, install fresh batteries.
No Heart Rate signal displayed (chest strap transmitter sold separately)
1. Ensure that your chest strap is worn correctly and that there is moisture under the
electrodes.
2. Relocate the bike away from any equipment that could potentially interrupt the radio
frequency signal, such as a DVD player or television, etc.
Cadence number jumps high or low
1. Separate bikes that may be set to the same console code and are cross-talking, or
re-synchronize the transmitter and console (see page 7).
2. Relocate the bike to a different part of the room, away from any RF interference areas.
Heart Rate signal gets interrupted or drops out (chest strap transmitter sold
separately)
1. Ensure that there is a minimum distance of 36 inches between bikes.
2. Verify that your chest strap is secure and that the electrodes are making contact with
your chest at all times.
CAUTION!!
EXTERNAL INTERFERENCE MAY BE CAUSED BY OTHER ELECTRONIC DEVICES, SUCH AS: NEARBY TELEVISIONS, STEREO EQUIPMENT, SPEAKERS, ELECTRICAL WIRE CABLING, ETC. IF YOU
EXPERIENCE DISTURBANCES IN THE CONSOLE DISPLAY TRY MOVING YOUR BIKE(S) AWAY FROM
POTENTIAL RF INTERFERENCE AREAS.
Maintenance Guidelines
Maintenance Schedule
PART
Pedals
RECOMMENDED ACTION
FREQUENCY
Ensure that pedals are tight in Before each
crank arms; that all screws on
use
pedals are tight; and that the
pedal straps are not frayed
Frame
Wipe down by using a soft
Daily
damp clean cloth
Flywheel Wipe down by spraying on a
Weekly
rag and applying a light coat
to sides of the flywheel
Inspectfor
forexcessive
excessivewear
wearor
Brake
Inspect
Weekly
squealing
Pad
a dry or
leather
brake pad
CLEANER
N/A
LUBRICANT
N/A
Water
N/A
WD-40
spray.
N/A
N/A
SiliconeOil
Spray
3-IN-ONE
or 10W
oil. Do not use
silicone-based
lubricants
1. Do not service internal parts of pedals. If they are found to be worn internally, we
recommend replacing the pedal.
2. Use of lubricants or cleaning solutions other than those so specified will result in
diminished performance and a shorter life span for that part.
MB880 Indoor Cycle
16
Manufacturer’s Limited Warranty
Effective July 15, 2011 - INDOOR CYCLE LIMITED WARRANTY
XTERRA Fitness Inc. warrants all its home use indoor cycle parts for a period of time listed below, from the date of retail sale, as determined
by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. XTERRA Fitness’s
responsibilities include providing new or remanufactured parts, at XTERRA Fitness’s option, and technical support to our independent
dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by XTERRA
Fitness directly to a consumer. The warranty period applies to the following components:
Home Use Limited WARRANTY
Frame
Parts
Lifetime
1 Year
Labor
1 Year
NORMAL RESPONSIBILITIES OF THE CONSUMER
This warranty applies only to products in ordinary household use. The consumer is responsible for the items listed below:
1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase
2.
3.
4.
5.
Proper use of the indoor cycle in accordance with the instructions provided in this manual, including maintenance.
facility wiring.
Expenses for making the indoor cycle accessible for servicing, including any item that was not part of the indoor cycle at the time it was
shipped from the factory.
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. Note: Some states do not allow the exclusion
or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.
2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects in
workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period,
for indoor cycles not requiring component replacement, or indoor cycles not in ordinary household use.
3. Damages caused by services performed by persons other than authorized XTERRA Fitness service companies, use of parts other than
4.
5.
6.
7.
8.
inadequate power supply, or acts of God.
Products with original serial numbers that have been removed or altered.
Products that have been; sold, transferred, bartered, or given to a third party.
Products that are used as store display models.
Fitness, Inc. XTERRA Fitness reserves the right to request proof of
purchase if no warranty record exists for the product.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
SERVICE
Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as
determined by the serial number establishes the warranty period should service be required. If service is performed, it is in your best interest
state. Service under this warranty must be obtained by following these steps, in order:
1. Contact your selling authorized XTERRA Fitness dealer. OR
2. Contact your local authorized XTERRA Fitness service organization.
3. If there is a question as to where to obtain service, contact our service department at (800) 258-8511.
4. XTERRA Fitness’s obligation under this warranty is limited to repairing or replacing, at XTERRA Fitness’s option, the product through
one of our authorized service centers. All repairs must be preauthorized by XTERRA Fitness. If the product is shipped to a service
center freight charges to and from the service center will be the customer’s responsibility. For replacement parts shipped while the
product is under warranty, the customer will be responsible for shipping and handling charges. For in-home service, the customer
will be responsible for a trip charge. There will be an additional trip charge if the customer is located over 100 miles from the nearest
service center.
5. The owner is responsible for adequate packaging upon return to XTERRA Fitness. XTERRA Fitness is not responsible for damages in
shipping. Make all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT
A RETURN AUTHORIZATION NUMBER. All units arriving without a return authorization number will be refused.
6. For any further information, or to contact our service department by mail, send your correspondence to:
XTERRA Fitness, Inc.
P.O. Box 2037
Jonesboro, AR 72402-2037
XTERRA Fitness, Inc. This warranty applies only in the 50 states of the U.S.A.
17
All warranties are made by
MB880 Indoor Cycle
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement