instruction sheet3.indd

1 Water Filter Set Up:
First time Use
2 Ice Production takes
48 hours
Make sure the water line is connected
and the water valve is fully open. After
you plug in your refrigerator and install
the water filter *, draw 8 large glasses of
water to prime and condition the water
filter as this will affect the taste of the
water and ice.
Allow your refrigerator to operate and
cool down for 24 hours (or 1 full day)
before proceeding to Step 3. Waiting
24 hours will allow your ice maker to
cool properly.
* Water Dispenser: When replacing the water
filter, press the dispenser arm for 2-3 minutes
to purge trapped air from the water line and to
fill the water tank. The water in the tank needs
24 hours to chill after installation.
3 Starting Ice Production
4 Filling your Ice Maker
Select Cubed Ice setting and hold a
large glass under dispenser. Dispense
4 to 6 ice cubes into the glass (this may
take a moment). Keep dispensing until
the ice drops into the glass. Wait 8
hours before proceeding to Step 4.
With Cubed Ice setting selected, use
a large water glass and dispense ice
cubes until the glass is full. Discard
Ice. Wait 8 hours before proceeding
to Step 5.
Installer: DO NOT REMOVE!
1.75”
IMPORTANT!
Refrigerator owner
must read ice maker
instructions before use.
Installer: DO NOT REMOVE!
IMPORTANT!
Fridge owner must read
ice maker instructions
before use.
5.5”
IMPORTANT ICE MAKER INSTRUCTIONS.
DO NOT THROW AWAY.
2.75”
Your satisfaction is
Samsung’s # 1 priority.
DO NOT RETURN TO STORE.
If you have any questions regarding this product,
please call us at 1-800-SAMSUNG (1-800-726-7864).
You can also visit us at www.samsung.com/support.
9.25”
4.25”
Download PDF