SIP Speaker - CyberData Corporation

SIP Speaker
The IP Endpoint Company
The CyberData SIP Speaker is a Power-over-Ethernet (PoE
802.3af/802.3at) and Voice-over-IP (VoIP) public address
loudspeaker that easily connects into existing local area
networks with a single CAT5 cable connection. The speaker
is compatible with most SIP-based IP PBX. In a non-SIP
environment, the speaker is capable of playing audio from a
multicast source. Its small footprint and low height allows the
speaker to be discreetly mounted almost anywhere.
New Features
 Support for security code to prevent unwanted SIP calls
 Optional red/green/blue/white strobe kit connection
available (sold separately)
 Autoprovisioning via HTTP, HTTPS, or TFTP
 HTTPS or HTTP web based configuration. HTTPS is
enabled by default.
 802.11q VLAN tagging
 Configurable sense input for use with fault detection or
with optional lighted button kit
 Configurable event generation for device health and
status monitoring
 Support for G.722 codecs
 Powered via PoE (802.3AF or 802.3AT)
or 24V auxiliary power supply (not included)
 Enhanced interoperability for hosted environments
Audio Output
802.3af - SPL 109.2 dB @ 1 meter
802.3at - SPL 111.9 dB @ 1 meter
Operating Temperature
-10o C to 50o C (14o F to 122o F)
Ethernet I/F
10/100 Mbps
SIP RFC 3261 Compatible
Power Input
PoE 802.3af/802.3at
Payload Types
G.711 u-law, G.711 a-law, and G.722
9 in. [228.6 mm] x 2.4 in. [60.96 mm]
Boxed Weight
4.0 lbs. [1.81 kg]
CE; EMC Directive – Class A EN 55032
& EN 55024, LV Safety Directive –
EN 60950-1, RoHS Compliant, FCC;
Part 15 Class A, Industry Canada;
ICES-3 Class A, IEEE 802.3 Compliant
2 years limited
Part Number
011393*, Standard Color, RAL 9002, Gray White
011394*, Optional Color, RAL 9003, Signal White
*This number replaces the 011098 and 011099 Speaker number.
SIP (RFC 3261) compatible
 Night Ringer function
 Plays audio from Multicast
 Web-based configuration
 Paging prioritization and background music
 User upgradeable firmware via web interface or
 External volume control
 Small footprint
 High efficiency speaker driver
 IGMP l SIP endpoint or Multicast group member
 Network-adjustable speaker volume
 Can drive one external analog speaker for greater
coverage (part #011120/011121 sold separately)
 Optional clock kit available (part #011153/011154
sold separately)
CyberData Corporation
3 Justin Court, Monterey, CA 93940
More Features
 Support for 10 multicast paging groups
 Support for multiple SIP servers for redundancy
 Support for Cisco SRST resiliency
 Relay for activating door locks, external amplifiers, etc.
 Line-level audio output for connecting to an external
Fax: 831.373.4193
SIP Speaker
Typical Installation
802.3af/at Compliant Ethernet Switch
SIP Speakers
IP-PBX Server
IP Phone
Speaker with Extra Speaker Connection
The speakers support an amplified audio output for
a second analog speaker.
Up to 20' Speaker Wire
While the total Speaker Wattage is the same, by
connecting a low cost analog speaker additional
coverage can be realized.
Low Cost 8 Ohm
Auxiliary Analog Speaker
011120, Standard Color, RAL 9002, Gray White
011121, Optional Color, RAL 9003, Signal White
Speaker with RGB Strobe
3.28 feet [1 meter] cable
supplied with strobe kit
SIP Speaker
CyberData Corporation
3 Justin Court, Monterey, CA 93940
011288 Auxiliary RGB Strobe (sold separately)
011376 SIP RGB Strobe (sold separately)
Fax: 831.373.4193
Download PDF