MGE Galaxy 300
3:3 Phase: 10/15/20/30/40 kVA, 3:1 Phase: 10/15/20/30 kVA
Effective and reliable 3-phase power protection designed to
prevent downtime and data loss for mission-critical applications
MGE Galaxy 300 - Simplicity you can trust.
MGE GalaxyTM 300 provides an effective and reliable solution for protecting
small server rooms, commercial buildings, and technical facilities. The online double-conversion topology supplies true isolation between input and
output with a zero transfer time. Up to 30 minutes of integrated battery
back-up, internal mechanical bypass and parallel capability allows for higher
levels of availability. Remote and local monitoring/management capability is
achieved through a built-in communication card with a simple Web/SNMP
interface and a user-friendly display available in 18 languages. Both three-tothree and three-to-single phase configurations are available for convenient
power distribution. Serviceability is greatly enhanced by front access for
ease of maintenance in confined spaces. All of these features, along with
the included start-up and on-site warranty, make the MGE Galaxy 300 the
easiest UPS in its class to install, manage, and maintain.
Features and Benefits
MGE Galaxy 300
Availability
Economy
Dual mains input Allows standard installation
of one or two independent power sources
Power factor corrected input Prevents the
need for oversizing cables, circuit breakers,
and generator
Automatic internal bypass Built-in 100
percent rated bypass static switch prevents
interruption by allowing load transfer to utility
power during heavy overloads
Parallel 1+1 for redundancy Connected
equipment can be powered with two UPS units
in parallel to increase system redundancy
Temperature-compensated battery charging
Sensors monitor battery temperature and adjust
charger voltage to prevent premature aging and
extend battery lifetime
Efficient Up to 93 percent with on-line double
conversion topology
Integrated battery back-up Provides higher
level of availability with up to 30 minutes
of runtime
Reduced footprint Compact wide or narrow
tower makes best use of available space
A robust charger for extended runtime
shortens recharge time to prevent deep
discharge damage and provides extended
runtime of up to four hours
Easy to install Wheeled unit rolls into place,
and all wiring connections are easily identifiable
for time-saving installation
Serviceability
Manual maintenance bypass Easily
accessible maintenance bypass allows
complete isolation of each part of the system,
facilitating maintenance operations without
power interruption
Front-access servicing Push-to-open,
close door, and slide-out boards simplify
installation and maintenance while minimizing
space requirements
Simplified Installation
Start-up wizard Step-by-step guidance and
intuitive menu screens for easy set-up and
system navigation
Manageability
Built in management card for SNMP
Remote and local monitoring and management
capabilities with simple Web/SNMP interface
User-friendly graphical interface Easy-toread LCD provides mimic diagrams, audible
alarms, and multi-language display, simplifying
operation
World-class service organization With
worldwide support and multiple levels of aftersales services, our package or individual on-site
service options are structured for you to choose
what APC™ can do for you
Typical Applications
• Small and medium businesses
• Commercial buildings: shop floors, hotels, convention centers
• Transportation and infrastructures
• Telecommunication
• Technical facilities
Reducing Environmental Impact for Sustainable Development
Beyond international environmental regulations
The critical power industry commits to environmental issues. Schneider Electric™
demonstrates a true commitment to sustainable development with systematic attempts
to exceed current and future requirements imposed by standards that include:
• ISO 14001 certification of sites and R&D
• Eco-design standards and eco-production
• RoHS compliance
MGE Galaxy 300 takes environmental issues into account at each stage of the
product’s life.
Product development according to environmental standards
Design
Reduced number of parts and advanced digital electronics used to improve
reliability and lessen environmental impact.
• Fewer electronic boards
• Software updates via downloading instead of changing boards
Raw materials
Compact size and low weight of design requires fewer, and more environmentally
friendly, raw materials.
• New design for a transformerless UPS
• More silicon, less copper
• More powerful IGBTs changing boards
Manufacturing
Produced in factories that comply with the ISO 14001 standard to reduce:
• Energy consumption
• Packaging waste for supplier parts
• Amounts of materials used in the process
Energy efficiency through quality power solutions
• Reduced consumption as a result of the IGBT rectifier (low harmonics),
which in turn reduces sizing of the electrical distribution system (breakers,
cables, generator).
• High-efficiency UPS solutions to reduce heat losses
• Up to 93 percent efficiency in on-line mode
The Restriction on Hazardous
Substances Directive (RoHS) restricts
the use of six hazardous materials in
the manufacture of various types of
electronics including lead, mercury,
cadmium, hexavalent chromium, PBB
and PBDE.
Battery Options
MGE Galaxy 300 provides integrated batteries for runtimes up to 30 minutes.
For extended runtime needs, three external battery cabinets can be used with
a robust charger option to increase runtime up to four hours. Temperature
sensors come standard to monitor the battery ambient temperature and
adjust the charger voltage to protect the batteries and delay premature aging.
External battery function is also protected by a circuit breaker equipped with an
undervoltage coil in the external battery cabinet.
UPS with integrated batteries
3:1
Model Number
3:3
Model Number
Typical runtime (*)
10
G3HT10K3IB1S
G3HT10K3IB2S
G3HT10KHB1S
G3HT10KHB2S
13 min
35 min
15
G3HT15K3IB1S
G3HT15K3IB2S
G3HT15KHB1S
G3HT15KHB2S
9 min
33 min
20
G3HT20K3IB1S
G3HT20K3IB2S
G3HT20KHB1S
G3HT20KHB2S
12 min
25 min
30
G3HT30K3IB1S
G3HT30K3IB2S
G3HT30KHB1S
G3HT30KHB2S
13 min
29 min
40
N/A
G3HT40KHB1S
G3HT40KHB2S
10 min
20 min
KVA
UPS with robust charger for extended runtime
and external battery cabinet options
Battery Cabinet
Model Number
UPS (3:1)
Model Number
UPS (3:3)
Model Number
10
G3HT10K3ILS
G3HT10KHLS
G3HTBAT1
G3HTBAT2
G3HTBAT3
113 min
203 min
267 min
15
G3HT15K3ILS
G3HT15KHLS
G3HTBAT1
G3HTBAT2
G3HTBAT3
65 min
121 min
173 min
20
G3HT20K3ILS
G3HT20KHLS
G3HTBAT2
G3HTBAT3
86 min
120 min
30
G3HT30K3ILS
G3HT30KHLS
G3HTBAT2
G3HTBAT3
55 min
71 min
40
N/A
G3HT40KHLS
G3HTBAT3
53 min
KVA
Typical runtime (*)
Battery Cabinet Dimension (HxWxD): 1300x500x850mm
G3HTBAT1 is composed of 1 cabinet; G3HTBAT2 and G3HTBAT3 are composed of 2 cabinets
(*) Typical runtime at 70% load
MGE Galaxy 300
Economy
Optimized features Galaxy 300 is designed to
provide optimal performance. The most in-demand
features have been carefully selected to propose
the right solution for predictable and reliable power
protection, offering the benefits of a true doubleconversion online architecture.
Reduced footprint Narrow and wide tower options
optimize the system footprint based on kVA power
requirements.
Simplified maintenance A full maintenance bypass
with front access permits complete isolation of
each part of the system and facilitates maintenance
operations without power interruption.
Availability
Wide input voltage range For harsh electrical
environments.
Double-conversion on-line topology Guarantees
a consistently high level of power quality.
Parallel capability Power the connected
equipment with two UPS in parallel to increase
system redundancy.
Dual feed input Allows standard installation of
one or two independent power sources.
Options
External battery cabinet For additional runtime.
Supplied with breakers and temperature sensors.
Parallel kit For 1+1 parallel redundancy.
(G3HTPARKITS)
Empty cabinet for third-party batteries or
transformers Line up and match cabinet for third
party batteries and transformers.
Communication cards
• Network Management Card supplied with the
product (AP9630) for Web/SNMP functions
• Optional card (AP9635CH) for additional features
such as Modbus/Jbus over RS485, Teleservice,
and environmental sensors: Temperature
(AP9335T), Temperature and Humidity (AP9335TH),
Dry contact I/O (AP9810)
QM1
~
=
=
=
=
QB
- +
QM2
Q3BP
QOP
~
Technical Specifications
Rated Power (kVA/kW)
10/8
15/12
20/16
30/24
40/32
Normal AC supply input
Input voltage (V)
380/400/415 V (Three-phase + Neutral)
Frequency (Hz)
45 – 65 Hz
Input Power Factor
Up to 0.99 at >50% load
THDI
Input Voltage Tolerance Utility Operation
<7% at full load
340V to 477V at full load ( -15% to +20% at 400V)
Dual Mains Input
Yes
Output
Nominal Output Voltage (V)
3:1 - 220/230/240 V
3:3 - 380/400/415 V (Three-phase + Neutral)
Efficiency at Full Load (on-line)
Output Frequency
Overload Capacity Utility Operation
N/A
Up to 93%
Mains synchronized in normal operation 50Hz or 60Hz + 0.1% free-running
125% for 2 minutes, 150% for 10 seconds
Output Voltage Tolerance
+2% static, +5% at 100% load step
Communication and Management
Communication Interface
Control Panel
Network Management Card (AP9630)
multi-function LCD, status and display console
Dimensions and Weight
UPS Dimensions (HxWxD) – 3:1
UPS Dimensions (HxWxD) – 3:3
UPS Weight (kg) without Batteries (3:1 / 3:3)
1300x400x860 mm
1300x500x860 mm
1300x400x860 mm
1300x500x860 mm
145 / 130 kg
185 / 130 kg
UPS Maximum Weight (kg) with integrated
Batteries
N/A
198 kg
615 kg
Battery Cabinet Dimensions (HxWxD)
1300x660x850 mm
Battery Cabinet - Minimum weight
105 kg
Battery Cabinet - Maximum weight
610 kg
Regulatory
Safety
IEC/EN62040-1-1
EMC/EMI/RFI
IEC 62040-2
Approvals
CE, TUV
Environmental
Operating Temperature
0°C to 35°C
Relative Humidity
0 to 90% non-condensing
Operating Elevation
0 to 1,000m at 100% load
Max. Audible Noise at 1m from unit
Protection Class
54 dBA at 100% load
53 dBA at 100% load
IP20
©2012 Schneider Electric. All Rights Reserved. Schneider Electric and APC are trademarks owned by Schneider Electric Industries SAS or its affiliated companies.
All other trademarks are property of their respective owners. e-mail: esupport@apc.com • 132 Fairgrounds Road, West Kingston, RI 02892 USA • 998-3863