4600 Series VacuFlush Toilets

4600 Series VacuFlush Toilets
High-powered performance in a versatile fixture.
4600 Series
VacuFlush Toilet
Enjoy the premium look of an all-ceramic toilet, yet in a compact size that allows
installation in a wide range of yachts and head compartment layouts, with
Key Benefits
Dometic 4600 series all-ceramic VacuFlush ® toilets. Its upscale
nPowerful vacuum flush.
style and electronic touchpad operation perfectly complement today’s taste in
nUltra low water consumption in two modes
boat designs and conveniences.
With freshwater flushing, instantaneous evacuation of bowl contents, and
thorough rinsing action, Dometic 4600 series toilets deliver sparkling clean,
odor-free performance. Using only 0.25 gal. (0.95 liter) per flush in the “normal”
mode or 0.125 gal. (0.5 liter) in the “dry bowl” mode, 4600 series toilets greatly
– “normal” flush at 0.25 gal. (0.95 l) or
“dry bowl” flush at 0.125 gal. (0.5 l).
n Standard Dometic wall switch or popular
Vimar and Gewiss switch options.
nFlat-back design – fits against bulkheads.
n“Soft-close” thermoset seat in white
(available in bone color in mid-2010)
extend the use of a holding tank between pump-outs as compared to manual
nStandard and low-profile heights.
and other electric toilets. In the “dry bowl” mode, water is not added to the toilet
nAutomatic “full tank” shutdown prevents
after flushing. This prevents splashing water out of the bowl while a boat is
underway or in rough seas.
Dometic 4600 series toilets satisfy diverse owner preferences and meet virtually
any boatbuilder requirement. The contemporary shape features a compact
footprint to fit in most any head compartment. They are available in low-profile
and standard-height units; white or bone colors; and in 12 V DC or 24 V DC
models. overfilling the holding tank (when
connected to tank level indication system).
nService mode allows cleaning or other
service without running water.
n Toilet/bidet combination model available
(later in 2011).
nIntegrated fuse (toilet only) – easy to reset.
n12 V DC or 24 V DC operation.
Technical Specifications for 4600 Series VacuFlush® Toilets
Model
Description
4606
Discharge
Low-profile all-ceramic VacuFlush electric toilet
through the floor, 1.5 in./38 mm dia. plumbing, vacuum
4609
Standard-height all-ceramic VacuFlush electric toilet
through the floor, 1.5 in./38 mm dia. plumbing, vacuum
4648
Standard-height all-ceramic VacuFlush electric toilet
above the floor, 1.5 in./38 mm dia. plumbing, vacuum
White and bone colors available. 12 V DC and 24 V DC models available. Contact sales representative for flush switch control options and other details.
Specifications subject to change without notice.
4600 Series VacuFlush System Requirements
Electrical
Toilet amp draw
2 amp @ 12 V DC; 1 amp @ 24 V DC
Toilet circuit breaker/
fuse
5 amp @ 12 V or 24 V DC
Vacuum source* draw
6 amps/12 V DC; 3 amps/24 V DC)
Vacuum source*
circuit breaker/fuse
10 amps/12 V DC; 5 amps/24 V DC)
ID
0.5 in. NPT
Flow rate
2.0 gpm/7.6 lpm minimum at toilet
Hose/PVC pipe ID
1.5 in./38 mm
Horizontal run**
50 ft./15 m maximum to vacuum source
Water
Supply
Discharge
Vertical run**
Required
Components
6 ft./1.8 m maximum to vacuum source
Electric flush switch
Vacuum source
†
†
Dometic Touchpad
Includes “add water” and “flush” functions, “OK to
flush” and “do not flush” indicator lights
Dometic Wall Switch
Dometic, Vimar or Gewiss
Standard Dometic switch
includes “add water” and
“flush” functions, “OK to
flush” and “do not flush”
indicator lights
VacuFlush vacuum generator, vacuum
holding tank, or holding tank system
* Required for J and S series VacuFlush vacuum generators.
** Based on J and S series VacuFlush vacuum generator specifications. Where applicable, see VHT series
vacuum holding tank manual for other installation specifications.
† Purchased separately.
Specifications subject to change without notice.
Flush Settings
Change from “Normal” to “Dry Bowl” flush option by pressing “flush”
switch for about five seconds. When green “OK to flush” light begins
flashing on indicator panel, release “flush” switch. Flush setting has been
changed. Change back to “Normal” setting in the same manner.
Vimar Indicator, Switches
Dimensions
4609/4648
4606
Add Water/
Flush
Switch
OK to Flush/
Do Not Flush
Indicator
Add Water/
Flush
Switch
OK to Flush/
Do Not Flush
Indicator
Gewiss Indicator, Switches
Add Water/
Flush
Switch
All dimensions may vary
± 0.375 in.(10 mm)
OK to Flush/
Do Not Flush
Indicator
Available in black only.
DOMETIC CORPORATION, SANITATION DIVISION
13128 SR 226, PO Box 38 l Big Prairie, OH 44611 USA l 330-496-3211 l Fax 330-496-3097
www.dometic.com l SeaLand@DometicUSA.com
L-2903
REV 01/11
Environmentally
Responsible
Add Water/
Flush
Switch
OK to Flush/
Do Not Flush
Indicator