Connecting a AV device

Best
Connecting a AV device
HD connection
HDMI/DVI
HD connection
Using an HDMI Cable
Using a DVI Cable
DVD / Blu-Ray player / HD Cable
Box / HD Satellite receiver (STB)
DVD / Blu-Ray player / Cable Box
/ Satellite receiver (STB)
HDMI OUT
DVI OUT
AUDIO OUT
Normal
PC/COMPONENT
EXT/VIDEO
B
R
B
W
R
Y
Audio/Video connection
R
G
G
R
R
W
R
W
W
Y
Component connection
Using an Audio/Video Cable
Using a Scart Cable
Using a Component Cable
VCR
VCR / DVD
DVD / Blu-Ray player / Cable
Box / Satellite receiver
VIDEO OUT
AUDIO OUT
EXT
AUDIO OUT
COMPONENT OUT
English -4
Downloaded from
www.vandenborre.be
BN68-02287J-01Eng.indd 1
2009-04-13 �� 5:14:27
LCD TV
QUICK SETUP GUIDE
The Supplied Accessoris
(M4 X L16)
Remote Control & Batteries (AAA x 2)
Power Cord
Stand Screw X 4
Cleaning Cloth
Cover-Bottom
Holder-Wire Cable
(Depending on the model)
User Manual
Installing Batteries in the Remote Control
BN68-02287J-01
English - 1
Downloaded from
www.vandenborre.be
BN68-02287J-01Eng.indd 2
2009-04-13 �� 5:14:28
Installing the Stand
Step 1
Step 2
2
Front
Back
1
Step 1. Attach your LCD TV to the stand.
N Two or more people should carry the TV.
N Make sure to distinguish between the front and back of the stand when assembling them.
N To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left
of right sides of the TV.
Step 2. Fasten two screws at position 1 and then fasten two screw at position 2.
N Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one
side.
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.
Using the remote control buttons
MENU Button
Display the main on-screen menu.
ENTERE / DIRECTION Button
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN Button
Return to the previous menu.
EXIT
Exit the on-screen menu.
English - 2
Downloaded from
www.vandenborre.be
BN68-02287J-01Eng.indd 3
2009-04-13 �� 5:14:29
Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting ‘Setup → Plug & Play’.
On the screen, you can set as follows.
N The each step may vary depending on the Antenna source.
Step 1
Step 2
Step 3
Plug & Play
Plug & Play
Plug & Play
Select the OSD Language.
Select ‘Home Use’ when installing this TV in your
home.
œ
Nederlands
English
: English
Eesti
Menu Language
Country
Store Demo
›
œ
Switzerland
United Kingdom
: English
CIS
Home Use
U Move E Enter
›
L Move E Enter
U Move E Enter
Step 4
Step 5
Step 6
Plug & Play
Plug & Play
Plug & Play
Select the Antenna source to memorise.
Select the Channel source to memorise.
Air
Stert
Digital & Analogue
Stert
Cable
Stert
Digital
Stert
Analogue
Stert
U Move E Enter m Skip
Step 7
Step 8
Plug & Play
Auto Store in progress.
Channels : 11
Analogue Channels : 6
Digital Channels : 5
15%
Stop
U Move E Enter m Skip
Plug & Play
E Enter m Skip
Step 9
1/2
Set the Clock Mode.
Clock Mode
Select Country.
How to get the best perfotmance from your new HDTV
Step 1.
Auto
: English
Manual
▼
U Move E Enter m Skip
Enjoy your TV.
C onnect the HD Box to the using HDMI or Component
cables.
HD box
TV rear view ▶
OK
HDMI Cable
Component Cable
r NEXT m Skip
English - 3
Downloaded from
www.vandenborre.be
BN68-02287J-01Eng.indd 4
2009-04-13 �� 5:14:30