32" LCD Colour Television
L32VP03U
䍏噅剟偁䝅ⵛ䝂崭䵂㌵彉䑔嘭偁久啟义䍋䕌ㅟ㌲㠵㙗弱〵さ䭟㄰〶㄰㤵張〱㐱ㄹ
〴⁍慲琠㈰〹⃇慲﹡浢愠ㄴ㨰㌺〴
Instructions for use
GB
Contents
Features ................................................................. 3
Accessories ............................................................ 3
Introduction ............................................................. 4
Preparation ............................................................. 4
Safety Precautions ................................................. 4
Power Source ..................................................... 4
Power Cord ......................................................... 4
Moisture and Water ............................................ 4
Cleaning.............................................................. 4
Ventilation ........................................................... 4
Heat and Flames ................................................ 4
Lightning ............................................................. 4
Replacement Parts ............................................. 4
Servicing ............................................................. 5
Waste Disposal ................................................... 5
Information for Users in European Union
Countries ............................................................ 5
Disconnecting the Device ................................... 5
Headphone Volume ............................................ 5
Installation........................................................... 5
LCD Screen ........................................................ 5
Warning .............................................................. 5
Overview of the Remote Control ............................ 6
LCD TV and Operating Buttons .............................. 7
Viewing the Connections- Back Connectors .......... 8
Viewing the Connections - Side Connectors ........ 10
Power Connection .................................................11
Aerial Connection ..................................................11
Using the Cable Holder .........................................11
Using Digital Multimedia Connectors.................... 12
USB Memory Connection ................................. 12
Side HDMI Connection ......................................... 12
Connecting the LCD TV to a PC........................... 13
Connecting to a DVD Player................................. 14
Using Side AV Connectors ................................... 15
Using Other Connectors ....................................... 16
Connecting Other Equipment via Scart ................ 17
Inserting Batteries in the Remote Control
Handset ................................................................ 18
Operating Range for the Remote Control ............. 18
Switching the TV On/Off ....................................... 18
To Switch the TV On ......................................... 18
The TV will then switch on. ............................... 18
To Switch the TV Off ......................................... 18
Input Selection ...................................................... 19
Basic Operations .................................................. 19
Operation with the Buttons on the TV ............... 19
Volume Setting .............................................. 19
Programme Selection ................................... 19
Viewing Main Menu....................................... 19
AV Mode ....................................................... 19
Operation with the Remote Control .................. 19
Volume Setting .............................................. 19
Programme Selection (Previous or Next
Programme) .................................................. 19
Programme Selection (Direct Access) .......... 19
Initial Settings ....................................................... 20
General Operation ................................................ 21
Information Banner ........................................... 21
Electronic Programme Guide (EPG) .................... 21
Displaying the Subtitles .................................... 22
Digital Teletext (** for UK only) ......................... 22
Analogue Teletext ............................................. 22
Widescreen ....................................................... 22
IDTV Menu System .............................................. 23
Channel List ...................................................... 23
Navigating the Entire Channel List ............... 23
Moving the channels in the channel list ........ 23
Deleting the Channels in the Channel List .... 23
Renaming Channels ..................................... 24
Adding Locks to Channels ............................ 24
Setting Favourites ......................................... 24
How to Add a Channel to a
Favourites List ........................................25
Removing a Channel from a
Favourite List ..........................................25
On Screen Help ........................................... 25
Program Guide ............................................. 25
Timers ............................................................... 25
Conditional Access ........................................... 26
TV Setup ........................................................... 26
Setup ................................................................ 26
Configuration ................................................ 26
AC3 Audio (*for EU countries only) ........27
Hard of Hearing (*for EU countries only) 27
Favourite Mode.......................................27
Channel List ...........................................27
Scan Encrypted .....................................27
Receiver Upgrade ..................................27
Over Air Download (OAD) ......................27
Parental Control .....................................27
Maturity Lock........................................28
Menu Lock ...........................................28
Set PIN.................................................28
Time Settings..........................................28
Audio Description ...................................28
Audio Description .................................28
Preferred Language .............................28
Relative Volume ...................................28
Standby Search (*) .................................28
Language ...................................................... 29
Preferred.................................................29
Current....................................................29
Language Settings ............................................ 29
Installation ..................................................... 29
Automatic Channel Scan ........................30
Manual Channel Scan ............................30
Clear Service List (*) ............................30
First Time Installation..............................30
Media Browser .................................................. 31
English - 1 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 1
05.03.2009 12:37:47
Playing MP3 Files ............................................. 32
Viewing JPG Files............................................. 32
Slideshow Options ............................................ 32
Navigating the Analogue TV Menu System .......... 33
Analogue TV Menu System .................................. 33
Picture Menu..................................................... 33
Mode ............................................................. 33
Brightness/Contrast/Colour/Sharpness ........ 33
Colour Temp.................................................. 33
Noise Reduction ........................................... 33
Film Mode ..................................................... 34
Game Mode .................................................. 34
Picture Zoom ................................................ 34
Reset ............................................................ 34
Store ............................................................. 34
Sound Menu ..................................................... 34
Volume .......................................................... 34
Equalizer ....................................................... 34
Balance ......................................................... 34
Headphone ................................................... 35
Volume....................................................35
Store .......................................................35
Sound Mode ................................................. 35
AVL ............................................................... 35
Spdif Out ....................................................... 35
Effect ............................................................. 35
Store ............................................................. 35
Feature Menu ................................................... 35
Pip-Pap ......................................................... 35
Pip-Pap ...................................................35
Pip Size ..................................................36
PIP Position ............................................36
Source ....................................................36
Program ..................................................36
Swap.......................................................36
Sleep Timer ................................................... 36
Child Lock ..................................................... 36
Language ...................................................... 36
Default Zoom ................................................ 36
Blue Background .......................................... 36
Menu Background ......................................... 36
Backlight ....................................................... 36
Menu Timeout ............................................... 36
Teletext Language ........................................ 36
Antenna Power (optional) ............................. 36
Ext Out .......................................................... 37
Install Menu ...................................................... 37
Program ........................................................ 37
Band ............................................................. 37
Channel ........................................................ 37
Colour System .............................................. 37
Sound System .............................................. 37
Fine Tune ...................................................... 37
Search .......................................................... 37
Store ............................................................. 37
Install Menu in AV Modes.............................. 37
Colour System ........................................37
Store ............................................................. 37
Program Table............................................... 37
Name ......................................................38
Move .......................................................38
Delete .....................................................38
APS (Auto Programming System) ..........38
Country ................................................38
Source Menu .................................................... 38
PC Mode Menu System........................................ 39
PC Position Menu ............................................. 39
Autoposition .................................................. 39
H (Horizontal) Position .................................. 39
V (Vertical) Position ...................................... 39
Phase ............................................................ 39
Dot Clock ...................................................... 39
PC Picture Menu ........................................... 39
Sound Menu ................................................. 39
Feature Menu ............................................... 40
Source Menu ................................................ 40
Displaying TV Information .................................... 40
Mute Function ....................................................... 40
PIP (Picture-in-Picture) and PAP (Picture-andPicture) Modes ..................................................... 40
Picture Mode Selection......................................... 40
Freezing Picture ................................................... 40
Zoom Modes......................................................... 40
Auto .................................................................. 40
16:9 ................................................................... 40
4:3 ..................................................................... 41
Panoramic......................................................... 41
14:9 ................................................................... 41
Cinema ............................................................. 41
Subtitle .............................................................. 41
Zoom................................................................. 41
Teletext ................................................................. 41
Tips ....................................................................... 42
Screen Care...................................................... 42
Image Persistence ............................................ 42
No Power .......................................................... 42
Poor Picture ...................................................... 42
No Picture ......................................................... 42
Sound ............................................................... 42
Remote Control................................................. 42
Input Sources.................................................... 42
Appendix A: PC Input Typical Display Modes....... 43
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types).............................................. 44
Appendix C: Pin Specifications............................. 45
SCART connector pin specifications ................ 45
HDMI connector pin specifications ................... 45
Signal Input ....................................................... 45
PC RGB Terminal (D-sub 15-pin connector) . 45
Appendix E: PIP/PAP Mode Combinations .......... 46
Appendix D: Supported File Formats for
USB Mode ............................................................ 47
Specifications ....................................................... 48
UK Guarantee....................................................... 49
Your Guarantee of Excellence .......................... 49
English - 2 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 2
05.03.2009 12:37:51
Features
Accessories
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
• Four HDMI connectors for digital video and
audio. This connection is also designed to
accept high definition signals.
M
SELECT
INFO
OK
ABC
DEF
GHI
1
2
3
MNO
PQR
JKL
• USB input.
5
4
• 200 programmes from VHF, UHF.
6
VWX
STU
YZ
7
8
9
PP
0
-/-EXIT
• OSD menu system.
P+
• Two scart sockets for external devices (such
as video, video games, audio set, etc.).
+
PSWAP
P<P
SOURCE
I-II
DTV
TV
AV
• Stereo sound system. (German+Nicam)
/
• Teletext, fastext, TOP text.
/
GUIDE
• Headphone connection.
WIDE
RC 1050
• Automatic programming system.
• Forward or backward manual tuning.
Remote Controller
• Sleep timer.
• Child lock.
• Automatic sound mute when no
transmission.
• NTSC playback.
• PIP / PAP / PAT functions.
Batteries
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5
minutes the TV switches itself automatically
to standby mode.
2 X AAA
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP,
Vista.
Instruction Book
• Audio line out.
• Game Mode.
Quick Guide
Cable Holer
English - 3 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 3
05.03.2009 12:37:51
Introduction
Moisture and Water
Thank you for choosing this product. This
manual will guide you in the proper
operation of your TV. Before operating
the TV, please read this manual
thoroughly.
Please do keep this manual in a safe
place for future references.
Preparation
For ventilation, leave a free space of at least
10 cm all around the set. To prevent any faults
and unsafe situations, please do not place any
objects on top of the set.
Use this device in moderate climates.
If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualified
personnel before operating it any further.
Cleaning
10 cm
Before cleaning, unplug the TV
set from the wall outlet. Do not
use liquid or aerosol cleaners.
Use soft and dry cloth.
10 cm
10 cm
Do not use this device in
a humid and damp place
(avoid the bathroom, the
sink in the kitchen, and near
the washing machine). Do
not expose this device to
rain or water, as this may be
dangerous and do not place
objects filled with liquids,
such as vases, on top. Avoid
dripping or splashing.
Ventilation
Safety Precautions
Please read the following recommended
safety precautions carefully for your
safety.
Power Source
The TV set should be operated only from a 220240 V AC, 50 Hz outlet.
Power Cord
Do not place the set, a piece of furniture, etc.
on the power cord (mains lead) or pinch the
cord. Handle the power cord by the plug. Do
not unplug the appliance by pulling from the
power cord and never touch the power cord with
wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or
tie it with other cords. The power cords should
be placed in such a way that they are not likely
to be stepped on. A damaged power cord can
cause fire or give you an electric shock. When it
is damaged and needs to be replaced, it should
be done by qualified personnel.
The slots and openings on the TV set are
intended for ventilation and to ensure reliable
operation. To prevent overheating, these
openings must not be blocked or covered in
anyway.
Heat and Flames
The set should not be placed
near to open flames and
sources of intense heat such
as an electric heater. Ensure
that no open flame sources,
such as lighted candles,
are placed on top of the TV.
Batteries should not be exposed to excessive
heat such as sunshine, fire or the like.
Lightning
In case of storm and lightning
or when going on holiday,
disconnect the power cord
from the wall outlet.
Replacement Parts
When replacement parts are required, make
sure that the service technician has used
English - 4 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 4
05.03.2009 12:38:02
replacement parts, which are specified by the
manufacturer or have the same specifications as
the original one. Unauthorized substitutions may
result in fire, electrical shock or other hazards.
Servicing
Disconnecting the Device
The mains plug is used to disconnect TV set
from the mains and therefore it must remain
readily operable.
Headphone Volume
Please refer all servicing to
qualified personnel. Do not
remove the cover yourself as
this may result in an electric
shock.
Excessive sound pressure from
earphones and headphones
can cause hearing loss.
Installation
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable
and should principally be recycled. Packaging
materials, such as foil bag, must be kept away
from children.
• Batteries, including those which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
battery in an enviromentally friendly manner.
Find out about the legal regulations which
apply in your area.
• Cold cathode fluorescent lamp in LCD
PANEL contains a small amount of mercury;
please follow the local laws or regulations for
disposal.
To prevent injury, this device
must be securely attached to the wall in
accordance with the installation instructions
when mounted to the wall (if the option is
available).
LCD Screen
The LCD panel is a very high technology product
with about a million thin film transistors, giving
you fine picture details. Occasionally, a few
non-active pixels may appear on the screen
as a fixed blue, green or red point. Please note
that this does not affect the performance of
your product.
Warning
Do not leave your TV in standby or operating
mode when you leave your house.
Information for Users in European
Union Countries
The mark
is in compliance
with the Waste Electrical
and Electronic Equipment
Directive 2002/96/EC
(WEEE).
The mark indicates the
requirement NOT to dispose
the equipment including any
spent or discarded batteries
as unsorted municipal waste, but use the return
and collection systems available. If the batteries
or accumulators included with this equipment,
display the chemical symbol Hg, Cd, or Pb,
then it means that the battery has a heavy
metal content of more than 0.0005% Mercury,
or more than 0.002% Cadmium or more than,
0.004% Lead.
English - 5 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 5
05.03.2009 12:38:04
Overview of the Remote Control
1. Standby
2. Cursor up
1
32
3. Cursor right
31
4. Info
2
3
30
5. Numeric buttons
6. Exit (in DTV mode)
M
29
28
7. Programme up
4
SELECT
8. Volume up
INFO
OK
9. TV / Digital TV
ABC
DEF
10. AV / Source
1
2
3
11. Yellow (Feature menu) / Current language
(*)
JKL
MNO
PQR
12. Blue (Install menu) / Favourite selection (*)
5
4
13. Hold (in TXT mode) / PIP position
14. Update (in TXT mode) / PAP mode
YZ
7
8
9
PP
0
-/-EXIT
15. Index page / Guide (in DTV mode)
16. Reveal (in TXT mode) / Switch from TV to
PC
26
17. Expand (in TXT mode) / Image Size
25
18. Mix (in TXT mode) / PIP mode
19. Teletext
20. Time / Subtitle on-off (**) (in DTV mode)
21. Red (Sound menu) / Channel list (in DTV
mode)
22. Green (Picture menu) / Subtitle (*) (in DTV
mode)
23. Swap / Previous programme
24. Mono/Stereo - Dual I-II
24
23
22
21
20
19
18
17
25. Programme down / Page up (in DTV
mode)
5
6
VWX
STU
27
GHI
P+
6
7
8
+
9
PSWAP
P<P
SOURCE
I-II
TV
DTV
/
AV
/
GUIDE
WIDE
10
11
12
13
14
15
16
RC 1050
26. Volume down
27. Personal preferences
28. Okay (store) / Select (in DTV mode)
29. Cursor down
30. Cursor Left
31. Menu
32. Mute
(*) Only available for EU country options.
(**) Only available for UK country option.
English - 6 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 6
05.03.2009 12:38:04
LCD TV and Operating Buttons
FRONT VIEW
1. Standby button
2. TV/AV button
3. Programme Up/Down
buttons
Note: Press “
”/ “
”buttons at the same time to view
main menu.
menu
menu
4. Volume Up/Down buttons
SIDE VIEW
REAR VIEW
English - 7 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 7
05.03.2009 12:38:05
Viewing the Connections- Back Connectors
12
13
1. S/PDIF Digital Out outputs digital audio signals of the currently watched source.
Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.
2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
3. Audio Line Out outputs audio signals to an external device such as an optional sound
system.
To connect an external amplifier and speakers to your TV; connect the TV’s audio LINE
OUT sockets to the line input sockets on an external amplifier with a stereo phono to phono
cable.
4. SCART 2 inputs or outputs for external devices.
5. SCART 1 inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically
switch to AV mode. If both sockets are employed at the same time, SCART 1 will override
SCART 2 unless manually selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled
channel. The decoder might not function properly if you do not connect the decoder to the
Scart 1 (Ext-1) socket.
English - 8 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 8
05.03.2009 12:38:07
6. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the COMPONENT VIDEO INPUTS
on on the TV and the component video outputs of your device. While connecting, be sure
that the letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors.
7. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that
connects to the TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of
your PC to enable PC audio.
Connect the audio cable between AUDIO IN on the TV and audio outputs of your device to
enable component audio.
8. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input.
9. ANT Input connects to an aerial.
Note that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate aerial cable, as shown in the
illustration on the following pages.
10. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
11. HDMI 3: HDMI Input
12. HDMI-2: HDMI Input
13. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as
a High Definition Satellite Receiver or DVD Player. These devices must be connected via
the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i
signals. No sound connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (not provided with the LCD TV), we would definitely recommend
to plug all your cables into the back of the LCD before mounting to the wall.
English - 9 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 9
05.03.2009 12:38:08
Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows
you to view channels that you subscribe to. For more
information, see “Conditional Access” section.
2. Side USB input.
Note: Codec update cannot be performed.
3. Side HDMI Input is for connecting a device that has an
HDMI socket. Note that PIP/PAP function will not be
available while in HDMI-4 source.
4. Headphone jack is used for connecting an external
headphone to the system. Connect to the HEADPHONE
jack to listen to the TV from headphones.
5. Video Input is used for connecting video signals from
external devices.Connect the video cable between the
VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
6. Audio Inputs are used for connecting audio signals from
external devices. Connect the audio cable between AUDIO
IN on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO
INPUT, you should also connect your device with an audio
cable to AUDIO IN on the TV to enable audio.
7. Standby switch is used for turning the TV on or off.
English - 10 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 10
05.03.2009 12:38:08
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect
the set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
REAR VIEW
Using the Cable Holder
You can use the supplied cable holder as the following:
• Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated
above.
• Place cables into the cable holder after all necessary connections are made.
English - 11 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 11
05.03.2009 12:38:11
Using Digital Multimedia Connectors
• You can connect USB devices to your TV by using the USB input of the TV. This feature allows
you to display/play JPG and MP3 files stored in a USB stick.
• It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with
this TV.
• You may back up your files before making any connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not be responsible for any file damage or data
loss.
• Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical
damage to the USB player and especially the USB device itself.
SIDE VIEW
USB MEMORY
USB Memory Connection
• Plug your USB device to the USB input of the TV.
Note: USB hard disk drives are not supported.
• It is recommended that you connect your USB device directly to the USB input of the TV. Some
compatibility problems may occur if you use a separate cable connection.
Side HDMI Connection
You can use side HDMI input to connect a device that has an HDMI connector to your TV. Use
an appropriate HDMI cable to make such a connection. Note that you should switch to HDMI-4
source to view the content from the connected device. Power off both the TV and the device
before making any connections.
• Side HDMI Input supports connections between HDMI devices such as DVD players. You can
use side HDMI input of the TV to connect to an external HDMI device. Use an HDMI cable to
connect.
HDMI DEVICE
SIDE VIEW
English - 12 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 12
05.03.2009 12:38:12
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your LCD TV, you can connect your computer
to the TV set.
• Power off both computer and display before making any connections.
• Use 15-pin D-sub display cable to connect a PC to the LCD TV.
• When the connection is made, switch to PC source. See “Input selection” section.
• Set the resolution that suits your viewing requirements. Resolution information can be found in
the appendix section.
REAR VIEW
Audio
Inputs
PC Input
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
PC RGB cable
(not supplied)
to PC input
English - 13 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 13
05.03.2009 12:38:13
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through SCART sockets. Use a scart cable to connect as
shown below.
• You may also connected through COMPONENT sockets. Use a component video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When done,
switch to YPbPr source. See, “Input selection” section.
Note: These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
Scart sockets
Component
video
inputs
Component
audio
inputs
HDMI
inputs
DVD Player
REAR VIEW
English - 14 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 14
05.03.2009 12:38:14
Using Side AV Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.
• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For
selecting the related source, see the section “Input selection” in the following parts.
• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.
Headphone
Camcorder
SIDE VIEW
English - 15 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 15
05.03.2009 12:38:15
Using Other Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.
• For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to
enable sound connection.
• To connect external speakers; connect the audio output sockets on the TV to an external amplifier
that is connected to a speaker system.
• After connecting the cable between your TV and external amplifier, turn your TV and amplifier
on.
• You can refer to your amplifier and speaker set instruction manual for further information.
External Speakers
A device that
supports
SPDIF signal.
REAR VIEW
English - 16 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 16
05.03.2009 12:38:19
Connecting Other Equipment via Scart
Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder
to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not
supplied.
Power off both the TV and the devices before making any connections.
For more information, refer to your device’s own instruction book.
REAR VIEW
Scart sockets
DVD Recorder
Video Recorder
Decoder
English - 17 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 17
05.03.2009 12:38:19
Inserting Batteries in the
Remote Control Handset
Switching the TV On/Off
To Switch the TV On
• Remove the battery cover located on the back
of the handset by gently pulling backwards
from the indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions
and replace the battery cover.
· Connect the power cord to the 220-240V AC
50 Hz.
” button to position “|” so the TV
· Switch the “
will switch to standby mode. Then the standby
LED lights up.
· To switch on the TV from standby mode
either:
· Press the “ ” button, P+ / P- or a numeric
button on the remote control.
· Press the -P/CH or P/CH+ button on the TV.
The TV will then switch on.
Note: If you are not going to use the remote control
for a long period, please remove the batteries in
order to avoid any battery leakage. Otherwise, the
remote control can get damaged because of battery
leakage.
Operating Range for the
Remote Control
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the “
• Point the top of the remote control toward the
LCD TV’s remote sensor LED while pressing
a button.
illustrated, (
” button to position 2 as
) so the TV will switch OFF.
• To power down the TV completely, unplug
the power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
30
30
M
SELECT
INFO
OK
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
5
4
6
VWX
STU
YZ
7
8
9
PP
0
-/-EXIT
P+
+
PSWAP
P<P
SOURCE
I-II
TV
DTV
/
AV
/
GUIDE
WIDE
Remote range is approximately 7m/23ft.
English - 18 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 18
05.03.2009 12:38:20
Input Selection
Once you have connected external equipment
to your TV, you can switch to different input
sources.
” repeatedly on the remote control
• Press “
to select the required source.
or,
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“ ” button to highlight an input and press “
” button to select.
Note : You can mark desired source options by
pressing the OK button. Therefore, when “
” button
is pressed, only the marked source options will be
available (except for the TV source).
AV Mode
• Press the “TV/AV” button in the control panel
on the TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed
to control all the functions on your TV. The
functions will be described in accordance with
the menu system of your TV.
• Functions of the menu system are described
in the following sections.
Volume Setting
• Press “
” button to increase the volume.
Press “
button to decrease the volume.
A volume level scale (slider) will be displayed
on the screen.
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous
programme.
• Press “ P + ” button to select the next
programme.
Programme Selection (Direct Access)
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
” button to decrease volume or
• Press “
button to increase volume, so a volume
level scale (slider) will be displayed on the
screen.
• Press numeric buttons on the remote control
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between 10 - 299
(for IDTV) or 10-199 (for analogue), press
the numeric buttons consecutively (e.g. for
programme 27, first press 2 and then 7).
When the pressing time is due for the second
numeric button, only the first digit programme
will be displayed. The limit of the delay time
is 3 seconds.
• Press directly the programme number to
reselect single digit programmes.
Programme Selection
• Press “P/CH +” button to select the next
programme or “P/CH -” button to select the
previous programme.
Viewing Main Menu
”/“
”buttons at the same
• Press “
time to view main menu. In the Main menu
select sub-menu using “P/CH -” or “P/CH +”
buttons and enter the sub-menu using “
” or “
” buttons. To learn the usage of the
menus, refer to the menu system sections.
English - 19 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 19
05.03.2009 12:38:21
Initial Settings
When the TV set is operated for the first time,
the IDTV turns on first.
After Automatic Search is completed, the
following message asking for analogue channel
search appears on the screen:
Because this is the first time the TV is used,
there are no channels stored in the memory.
When the TV is turned on for the first time, the
menu for the language selection appears on the
screen. The message “Welcome please select
your language!” is displayed in all language
options sequentially in the OSD.
By pressing the “ ” or “ ” buttons highlight
the language you want to set and press OK
button and then, “First time installation” OSD
will appear on the screen. By pressing “ ” or “
” buttons, select the country you want to set
and press button (** for EU countries).
To search for analogue channels, select “Yes”.
TV switches to the analogue TV mode. The
menu below is displayed to search for analogue
channels:
Note: Country selection OSD will not be available
for UK.
After the “First time installation” is performed,
the following message appears on the screen:
To start installation process, select “Yes”, to
cancel select “No”.
• To select the “Yes” or “No” option, highlight the
item by using “ ” or “ ” buttons and press the
OK button.
The IDTV will automatically tune to the UHF or
VHF (** for EU countries) transmission channels,
searching for digital terrestrial TV broadcasts
and displaying the names of channels found.
This process will take about a few minutes. To
cancel searching, you can press the “M” button
at any time during the process.
Select your Country, Language and Text
language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue.
To cancel, press the BLUE button.
For more information on this process, see
“Install Menu” section.
Note: For proper functioning of digital teletext in DTV
mode, you should set country as UK in analogue
AUTO PROGRAM (for UK only).
English - 20 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 20
05.03.2009 12:38:22
General Operation
Pressing the “TV/DTV” button at any time
while watching television programmes will
switch the TV set between the digital terrestrial
television broadcasting and normal analogue
broadcasting.
Information Banner
• Whenever you change channel, using the
P- / P+ button or the numeric buttons, the TV
displays the broadcast picture along with an
information banner at the bottom of the screen
(available only in DTV mode). This will remain
on the screen for a few seconds.
• The information banner can also be displayed
at any time while watching TV by pressing the
INFO button on the remote control:
The information banner gives information on
the channel selected and the programmes on
it. The name of the channel is displayed, along
with its channel list number.
channel. “Enter PIN” will be displayed on the
screen in such a case:
Electronic Programme Guide
(EPG)
• Some, but not all, channels send information
about the current and next events.
• Please note that event information is updated
automatically. If there is no event information
data available in channels, only channel
names with “No Information Available” banner
is displayed.
• Press GUIDE button to view the EPG menu.
• Electronic Programme Guide appears on the
screen. It is able to get Information of the
channel - programs weekly by means of 7-DAYEPG. All programs of channels are displayed.
The current program is highlighted and there
is brief information about the programs of
the channel, such as: name, short/extended
event description, start & end time. The time
scale can be changed by pressing left or right
buttons. If there is any event information data
available, only programme names and dates
are displayed. On the bottom of the screen;
info bar, showing all the available commands,
will be displayed.
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
• Icons are also displayed in the information
banner and if this channel is a favourite
channel, favourite channel icon will also be
displayed.
• If you press “INFO” button for second time,
extended information will be displayed.
• By using “ ” or “ ”button, you can select
Now & Next events. You can also set timers
while Next events are selected by pressing
OK button.
RED button (Shrink): makes the info boxes
smaller.
GREEN button (Expand) : makes the info
boxes larger.
• Press again to quit “INFO” mode.
YELLOW button (Prev. Day): displays the
programmes of previous day.
If the selected channel is locked, you must
enter the correct four numeric code to view the
BLUE button (Next day) : displays the
programmes of the next day.
English - 21 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 21
05.03.2009 12:38:22
INFO (Details): displays the short extended
programmes in detail.
• Press the TELETEXT (
Numeric buttons (Jump): go to preferred
channel directly via numeric buttons.
• Operate it with the coloured buttons, cursor
buttons and “OK” button.
OK : views options for future programmes.
The operation method may differ depending on
the contents of the digital teletext.
P<P : jumps to the current broadcast.
• Press “0” button to view Guide Search
menu. Using this feature, you can search the
programme guide database in accordance
with the genre selected or with name match.
Info available in the programme guide will be
searched and results matching your criteria
will be listed. You can select programmes or
set timers by highlighting a channel and then
pressing “OK” button.
Note: Searching process can be performed by the
desired date rate or by the channel basis.
Displaying the Subtitles
With digital terrestrial broadcasting (DVB-T),
some programmes are broadcast with subtitles.
Subtitles can be displayed while watching these
programmes.
Note: You can enable subtitles by pressing the “
”
(** for UK) or GREEN (* for EU countries) buttons.
Press the “M” button to display the main menu,
highlight the Setup and then Language menu
using “ ” or “ ” button and press the OK button
to display the “Language settings” menu.
Highlight the “Subtitle” item in “Language
settings” menu and use “ ” or “ ” button to set
Subtitle to the desired language.
If “Subtitle” is on and a language option is set,
pressing the TELETEXT ( ) button causes
the following warning message display on the
screen (* for UK only):
) button.
• The digital teletext information appears.
Follow the instructions displayed on digital
teletext screen.
• When press “SELECT” button or similar
message appears on the screen, press the
OK button.
• When the TELETEXT ( ) button is pressed,
the TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T),
in addition to digital teletext broadcasting
together with the normal broadcasting, there
are also channels with just digital teletext
broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting
is the same as the aspect ratio of the picture
viewed previously.
• When you press the TELETEXT ( ) button
again, the digital teletext screen will be
displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in
a number of formats. Press the WIDE button
repeatedly to select between Auto, 16:9, 4:3,
Panoramic, 14:9, Cinema, Zoom or Subtitle.
When Auto is selected, the format being
displayed is determined by the picture being
broadcast.
PLEASE NOTE: Menu size changes depending on
the chosen image size.
Digital Teletext (** for UK only)
With digital terrestrial broadcasting (DVB-T),
in addition to pictures and sound, you can also
view digital teletext.
Digital teletext is sometimes broadcast at the
same time with the normal broadcast.
English - 22 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 22
05.03.2009 12:38:23
IDTV Menu System
The IDTV menu can only be viewed when
watching digital terrestrial broadcasting. Press
the TV/DTV button to turn IDTV on while the TV
is in analogue mode.
Press the “M” button. The menu below appears
on the screen:
To watch a specific channel, highlight it using
“ ” or “ ” button and then press “OK” button,
while the “Select” item on Channel List menu is
highlighted by using “ ” or “ ” button.
Then the name and number of the selected
channel will be displayed in the top-left and
top-right of the channel display at the top-right
of the screen, respectively.
Moving the channels in the channel list
• Press “ ” or “ ” buttons to select the channel
that will be moved.
• Press “ ” or “ ” buttons to select the “Move”
item on Channel List menu.
The following OSD will be displayed to indicate
that a channel number should be entered using
the numeric buttons.
Channel List
Using the “ ” or “ ” button on the remote
control, make sure that the first item, Channel
List, is highlighted and press the OK button to
display the Channel List.
The following operations can be performed in
this menu:
• Navigating the entire list of channels
• Deleting channels
• Renaming channels
• Adding locks to channels
• Setting favourites
• Moving channels
Channel List is the place where the channels
are managed.
Note: If you enter the programme number of the
channel that you want to move, “.... channel services
will be replaced. Do you want to continue?” OSD will
be displayed. Press OK to confirm or select “No” to
cancel.
Deleting the Channels in the Channel List
• Press “ ” or “ ” button to select the channel
that will be deleted.
• Press “ ” or “ ” button to select the “Delete’’
item on Channel List menu.
Navigating the Entire Channel List
Press “ ” or “ ” button for selecting the
previous or next channel. You can press “P+” or
“P-” button to move page up or page down.
English - 23 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 23
05.03.2009 12:38:24
Press the “M” button to cancel the editing or OK
button to save the new name.
Adding Locks to Channels
Channel locking provides a password-protected
access to channels selected by parents. In order
to lock a channel you should know the parental
lock password (default value is set to 0000 in
the factory and can only be changed from the
Configuration menu).
• Press the OK button to delete the highlighted
channel in the channel list. Then the message
below appears on the screen:
Press “ ” or “ ” button to highlight the desired
option. If OK button is pressed while “Yes” is
highlighted, the highlighted channel is deleted.
Selecting “No” cancels the deletion.
Renaming Channels
To rename a specific channel, the channel must
be highlighted by pressing “ ” or “ ” button.
Then highlight the Edit Name item by pressing
“ ” or “ ” button as illustrated below. Press the
OK button to activate the rename feature.
Select the channel to be locked by highlighting
it and select the Lock option by pressing “ ”
or “ ” button. When the OK button is pressed,
a dialog OSD asking for the password will be
displayed.
Enter the password by using the numeric
buttons on the remote control. The lock icon “
” will now be displayed next to the selected
channel. Repeat the same operation to cancel
the lock.
Setting Favourites
You can set various channels as favourites so
that only the favourite channels are navigated.
To set a favourite you should highlight the
“Favourites” item at the bottom of the Channel
List menu. Then press OK button Favourite Lists
menu appears on the screen.
You can list your favourite channels using List
1, List 2, List 3, List 4 or List 5.
Now pressing “ ” or “ ” button moves to the
previous/next character. Pressing “ ” or “
” button toggles the current character, i.e., ‘b’
character becomes ‘a’ by “ ” and ‘c’ by “ ”.
Pressing the numeric buttons ‘0...9’ replaces
the highlighted character with the characters
printed above the button one by one as the
button is pressed.
Using 5 lists enables listing channels for
different categories (sport, music etc.). And
by activating the favourites list number that
you want in Favourite Mode submenu of
Configuration menu, or by changing favourite
lists by pressing the BLUE button (** for EU
countries). you enable only the channels in the
selected list.
Channel list OSD will look like this:
English - 24 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 24
05.03.2009 12:38:24
How to Add a Channel to a Favourites List
Program Guide
• By pressing “ ” or “ ” buttons, highlight the
channel that you want to add to the favourite
list.
This section is same with the instructions given
in the General Operations page. Please see
Electronic Programme Guide (EPG) section in
the General Operations part.
• Select the list number by pressing “ ” or “
” buttons.
Timers
• By pressing OK button, the highlighted channel
is added to selected list number.
• For each channel, an icon indicates which
favourite list a channel is in. (i.e. In figure
above, icon indicates that BBC ONE is added
to List 1.)
Removing a Channel from a Favourite List
• Highlight the channel that you want to remove
from the favourite list.
• Highlight the list number from which the
channel will be removed, and press OK button.
The icon indicating the list that contains the
channel disappears on the menu.
To display timers window, activate the item
from the main menu. To add a timer, press the
YELLOW button on the remote control. Then
“Add Timer” window appears.
Note: A channel can be added to more than one
favourite list.
Channel: “ ” or “ ” keys will navigate the user
through the list.
• To activate Favourites, go to the Configuration
menu and select the list number in Favourite
Mode you want to activate by pressing “
” or “ ” buttons or by changing favourite
lists by pressing the BLUE button (** for EU
countries). To cancel Favourites, set Favourite
Mode to Off.
Date: Starting date is entered via the Left/Right
or the numeric buttons.
On Screen Help
For all menus, press the “INFO” button to display
the help information about the menu functions.
For Channel List menu the following message
is displayed on the screen:
Start: Starting time is entered via the Left/Right
or the numeric buttons.
End: Ending time is entered via the Left/Right
or the numeric buttons.
Duration: Duration between Start and End
time.
Repeat: You can set a timer to be repeated as
Once, Daily or Weekly.
Change/Delete : permits or prohibits any
modifications for other users.
You can save the adjustments by pressing the
GREEN key or cancel the process by pressing
the RED button. You can edit the list via GREEN
key and delete with the RED button.
English - 25 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 25
05.03.2009 12:38:25
Note: You can set timers for the desired broadcast and
time. Recording broadcasts is also possible by using
a recording device that you connect to your TV’s Ext
Out. When the timer is due, output will be provided
via the TV-Out and the recording can be performed
by the connected recorder that you have set.
Conditional Access
• Press the “M” button to display the main menu
and use the “ ” or “ ” button to highlight the
“Conditional Access” line and press the
“OK” button:
• When no module is inserted, “No Conditional
Access module detected” message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.
Note: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV
functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the “M” button to
display the main menu and use “ ” or “ ” button
to highlight “TV Setup”, press the “OK” button
to display TV Setup menu screen.
Some Digital Terrestrial channels operate
on a Pay Per View basis. These require a
subscription and a hardware decoder.
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the TV
using the following procedure.
• Switch off the TV and unplug from the
mains.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the
left-hand side of the TV (from front view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM
is forcefully inserted.
• Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Conditional Access then pressing
the “OK” button. (CAM set up menu is not
displayed when it is not required.)
You can find detailed information for all menu
items in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the
following:
Configuration
You can configure the settings of your TV. Select
Configuration from Setup menu and press OK
to view this menu. Press the EXIT button on the
remote control to exit.
• To see the viewing contract information: enter
IDTV; press the “M” button, then highlight
Conditional Access and press the “OK”
button.
English - 26 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 26
05.03.2009 12:38:25
AC3 Audio (*for EU countries only)
In the Configuration Menu, highlight the AC3
Audio item by pressing “ ” or “ ” buttons. Use
the “ ” or “ ” buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (*for EU countries only)
TV automatically powers up at 3.00 A.M. each
day and searches for any new information which
may be broadcast and will download this to
your receiver automatically. This operation will
normally take approximately 30 minutes. If you
have an important recording to be carried out
at 3.00 A.M. and you do not want to interrupt
it, disable auto OAD search by performing the
following:
Use “ ” or “ ” button to select Hard of Hearing
and then press “ ” or “ ” button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.
Favourite Mode
This function enables or disables the 5 favourite
channel list mode by pressing “ ” or “ ” buttons
and OK. If a favourites list exists, it will switch to
the list number selected. If there is no favourite
listing, a warning message will be displayed.
Channel List
Use “ ” or “ ” buttons to go to Channel List
option. Use “ ” or “ ” buttons to toggle Channel
List Mode. If you select “TV Only”, with the “
” or “ ” buttons, you navigate through only TV
channels. If you select “Radio Only”, with the “ ”
or “ ” buttons, you navigate through only radio
channels. If you select “Text Only”, with the “ ”
or “ ” buttons, you navigate through only text
channels. To save the recent changes and exit;
press the “M” button.
Scan Encrypted
Scan Encrypted Channel feature will always be
ON after performing first time installation.
When this setting is on, search process will
locate the encrypted channels as well. If it is
set as OFF manually, encrypted channels will
not be located while in automatic search or
manual search.
Use “ ” or “ ” button to select Scan Encrypted
and then press “ ” or “ ” button to set this
setting as On or Off.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most
update information, use this setting. Please
ensure that the TV is set to standby mode. The
• Press “M” button and using the “ ” or “ ”
buttons to choose Setup and press the OK
button.
• Highlight Configuration menu with “ ” or “ ”
keys and press OK.
• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press OK button.
• Using the“ ” or “ ” button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with “
” or “ ” keys and pres OK to commence
upgrade.
• After the search progress is completed, the
message “ Completed searching for upgrade.
No new software was found” appears on the
screen if no new software is found.
• Do not forget to re enable the automatic OAD
function after you have made your recording
by repeating the above instructions but this
time selecting ENABLE.
Note: Your TV may start in First Time Installation
mode after OAD update.
Parental Control
Use “ ” or “ ” buttons to go to Parental Lock
option. Press “OK” button to enter the menu.
A dialog box asking for the lock key will be
displayed. The key is set to “0000” initially. Enter
PIN. If it is incorrect, “Wrong Pin” OSD will be
displayed. If it is correct, the Parental Control
menu will be displayed:
English - 27 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 27
05.03.2009 12:38:26
displayed on the screen. Current Time,Time
Zone Setting and Time Zone will be available.
Use “ ” or “ ” buttons to highlight the Time
Zone
Maturity Lock
(**) If you set Country option as UK in the first
time installation, Maturity Lock option will not
be visible.
When set, this option gets the maturity information
from the broadcast and if this maturity level is
disabled, does not show video-audio.
Menu Lock
In menu lock you can set locking for all menus,
or the Installation Menu to restrict access to
these menus. If the menu lock is disabled, there
will be free access to the menu system. Use “ ”
or “ ” buttons to go to Menu Lock option. Use “
” or “ ” buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only
with the correct lock key. So the user cannot
add, delete, rename, channels, cannot set
timers.
INSTALLATION MENU: Installation menu is
locked.So the user can’t add channels. Changes
will be updated after exiting ‘Configuration
Menu’.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option.
Press OK to display the “Set PIN” window. Use
numeric buttons to enter new pin number you
will need to input your new pin a second time
for verification purposes. If both pin numbers
are four digits long and the same, the pin will
be changed. The factory default pin number is
0000, if you change the pin number make sure
you write it down and keep it safe.
Setting. Time Zone Setting is set using “ ” or “
” buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Current Time and
Time
Zone options will not be available to be set. If
MANUAL option is selected as the Time Zone
Setting, Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time
Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time
on the top of the menu list will then change
according to the selected Time Zone.
Audio Description
Audio description refers to an additional
narration track for blind and visually impaired
viewers of visual media, including television and
movies. The description narrator talks through
the presentation, describing what is happening
on the screen during the natural pauses in
the audio (and sometimes during dialogue, if
deemed necessary). You can use this feature,
only if the broadcaster supports that additional
narration track. Use “ ” or “ ” buttons to select
an item. Then use “ ” or “ ” buttons to set.
Audio Description
This function enables or disables the audio
description feature by pressing the “ ” or “
” buttons.
Preferred Language
By pressing the “ ” or “ ” buttons the preferred
audio description language is being changed.
This setting can be used, only if it is available.
Relative Volume
Using this option, the Audio Description volume
level can be increased or decrased relatively,
according to the general volume.
Time Settings
Standby Search (*)
In the configuration menu, highlight the Time
Settings item by pressing “ ” or “ ” buttons.
Press OK and Time Settings sub menu will be
(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.
English - 28 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 28
05.03.2009 12:38:26
Use “ ” or “ ” button to select Standby Search
and then press “ ” or “ ” button to set this
setting as On or Off. If you change Standby
Search to Off, this function will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Language
In this menu the user can adjust the preferred
language. Language is changed by pressing
OK button.
Language Settings
In the configuration menu, highlight the
Language Settings item by pressing “ ” or “ ”
buttons. Press OK and Language Settings sub
menu will be displayed on the screen:
Use “ ” or “ ” buttons to highlight the menu
item that will be adjusted and then press “ ” or
“ ” button to set.
Notes:
• System Language determines the on-screen
menu language.
• Audio Language is used for selecting the
soundtrack of a channels.
Menu: shows the language of the system
Preferred
These settings will be used if available.
Otherwise the current settings will be used.
• Audio: by pressing “ ” or “ ” keys change the
audio language.
• Subtitle: alter the subtitle language with “
” or “ ” keys. The chosen language will be
seen in subtitles.
• Primary settings are the first priority when
multiple choices are available on a broadcast.
Secondary settings are the alternatives when
the first options are not available.
Installation
The Installation menu is mainly intended to
help you for creating a Channel Table in the
most efficient way. Select Installation from the
Configuration menu by pressing “ ” or “ ”
buttons.
• Guide: By pressing “ ” or “ ” buttons change
the guide language.
This menu includes the following items:
Current
• Manual Channel Scan
• Audio: if audio language is supported change
the audio language by pressing “ ” or “ ”
buttons
• Clear Service List (*)
• Subtitle: if subtitles are supported, alter the
subtitle language with “ ” or “ ” buttons. The
chosen language will be seen in subtitles.
• Automatic channel scan
• First Time Installation
(*) For Denmark, Sweden, Norway or Finland.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
English - 29 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 29
05.03.2009 12:38:27
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item
is highlighted.
The following message appears on the
screen:
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Manual Channel Scan
Highlight Yes or No by using “ ” or “ ” buttons
and press OK button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
In manual channel scan, the number of the
multiplex is entered manually and only that
multiplex is searched for the channels. For every
valid channel number, signal level and signal
quality are shown on the screen.
In both manual and auto search any existing
channel in the database is not re-stored to avoid
redundant duplicates of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.
Use this setting to clear channels stored.
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
Press “ ” or “ ” button to select Clear Service
List and then press OK. The following OSD
message will be displayed on the screen:
Are you sure you want to delete all channels?
Press OK to cancel.
Select Yes by pressing “ ” or “ ” button and
press OK to delete all of the channels.
First Time Installation
The user can use this item to load default
settings, which were loaded to the receiver at
the factory.
Select your Country , Language and Text
language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
To install factory settings, highlight “First Time
Installation” menu item and press OK button,
then you will be asked whether or not to delete
the settings. Selecting “Yes” by pressing OK
button while the “Yes” is highlighted will delete
the existing channel table.
Then you will be asked to confirm for deleting
all channels and settings:
English - 30 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 30
05.03.2009 12:38:28
By selecting Yes and pressing the OK button,
the existing channel table will be deleted.
Select your Country , Language and TXT
Language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After factory settings are loaded, “First Time
Installation” menu will be displayed.
The menu which is displayed for language
selection appears on the screen at first. By using
“ ” or “ ” buttons, select the desired language
option, and press OK button to activate.
“First time installation” OSD will appear on the
screen. By pressing “ ” or “ ” buttons, select
the Country you want to set and press OK
button (* only for EU countries).
After the country option is selected, a message
asking for automatic search appears on the
screen:
Press the OK button to start installation. After
search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Media Browser
• To display Media Browser window, press
either “M” button on the remote control and
then select Media Browser by pressing “ ”
or “ ” button. Press OK button to continue.
Media Browser menu contents (depending
on the contents of your USB drive) will be
displayed.
• Also, when you plug a USB device, the
following screen will be displayed:
Select YES by pressing “ ” or “ ” button
and press OK button. Media browser will be
displayed.
• You can play music, picture and video files
from a USB memory stick.
Note: If you plug USB stick while in analogue mode,
the TV will automatically switch to digital TV mode.
English - 31 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 31
05.03.2009 12:38:28
Note: Some USB compliant devices may not be
supported.
Slideshow Options
Note: If the USB stick is not recognized after power
off/on or First Time Installation, first, plug the USB
device out and power off/on the TV set. Plug the USB
device in again.
Playing MP3 Files
Pause (Yellow button) : Pause the slideshow.
Continue (Green button) : Continue with the
slideshow.
Previous/Next (Left/Right buttons) : Jump to
previous or next file of slideshow.
Play This (OK button) : Plays the selected file.
Play (Green button) : Plays all media files in the
folder starting with the selected one.
Pause (Yellow button) : Pause playing file.
Stop (Red button) : Stop the playing file.
Previous/Next (Left/Right buttons) : Jumps to
previous or next file to play.
Shuffle (INFO button) : Plays the files randomly.
If shuffle mode is enabled, previous/next
function will also jump to the tracks randomly.
Loop (Blue button) : Plays the selected file
repeatedly.
Viewing JPG Files
Rotate (Up/Down buttons) : Rotate the picture
using up/down buttons.
EXIT : Back to file list.
Shuffle (Red button) : Shows the files randomly
icon
and continuous in current folder and
turns the highlighted icon. If during a slideshow
the shuffle mode is enabled, the next pictures
will be choosen randomly (If the loop function is
not enabled, the slideshow will stop at the end. If
the loop function is enabled, after the slideshow
ends, it will start again and again).
Loop : Slideshow goes on continuously and
icon turns the highlighted icon.
Info : Activates the operations bar.
Jump (Numeric buttons) : jump to selected file
using the numeric buttons.
OK : views the selected picture in full screen.
Play / Slideshow (Green button) : starts the
slideshow with all pictures in the folder.
English - 32 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 32
05.03.2009 12:38:29
Navigating the Analogue TV
Menu System
Analogue TV Menu System
Picture Menu
For displaying
menu options
For navigation
M
To confirm choices
SELECT
INFO
OK
• Press “M” to display the main menu.
• Press “ ” or “ ” button to select an icon.
• Use “ ” or “ ” button to highlight a setting.
• Press “ ” or “ ” buttons to change the
settings.
• Press “ ” for more options.
• Press OK to store.
• To exit the menu or return from sub-menu
screen, press “M”.
Note: These explanations are valid for the navigation
of the analogue TV menu system. To select options
that are explained in the following parts, refer to
“Navigating the Analogue TV Menu System”.
Mode
For your viewing requirements, you can set the
related mode option.
Press “ ” or “ ” button to select Mode. Press
“ ” or “ ” button to choose from one of these
options: Cinema, Dynamic and Natural.
Brightness/Contrast/Colour/Sharpness
Press “ ” or “ ” button to select the desired
option. Press “ ” or “ ” button to set the level.
Note: Hue option is only be visible when the TV
receives an NTSC signal.
Colour Temp
Press “ ” or “ ” button to select Colour Temp.
Press “ ” or “ ” to choose from one of these
options: Cool, Normal and Warm.
Note:
• Setting Cool option gives white colours a slight
blue stress.
• Setting Warm option gives white colours a slight
red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to reduce
the amount of noise.
Press “ ” or “ ” button to select Noise
Reduction. Press “ ” or “ ” to choose from one
of these options: Low, Medium, High or Off.
English - 33 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 33
05.03.2009 12:38:30
Sound Menu
Film Mode
Films are recorded at a different number
of frames per second to normal television
programmes.
Press “ ” or “ ” button to select Film Mode.
Press “ ” or “ ” button to set this feature On
or Off.
Turn this feature on when you are watching.
films to see the fast motion scenes clearly.
Game Mode
Select Game Mode by pressing “ ” or “
” button. Use “ ” or “ ” button to set Game
Mode as On or Off. When Game Mode is set
to On, specific game mode settings, which
are optimized for better video quality, will be
loaded.
Also; Picture Mode, Contrast, Brightness,
Sharpness, Colour and Colour Temp settings
will be invisible and disabled while Game Mode
is on.
Volume
Press “ ” or “ ” button to select Volume.
Press “ ” or “ ” button to change the level of
the Volume.
Equalizer
Press “ ” or “ ” button to select Equalizer.
Press “ ” button to view equalizer menu.
Note:
Picture mode selection button on the remote control
will have no function while Game Mode is on.
If the TV is switched to PIP/PAP mode, Game Mode
setting will be disabled and be removed from the
Picture menu.
Picture Zoom
Select Picture Zoom by pressing “ ” or “
” button.
Use “ ” or “ ” buttons, to change picture zoom
to Auto, 16:9, 4:3, Panoramic, 14:9, Cinema,
Subtitle or Zoom.
Reset
Press “ ” or “ ” button to select Reset. Press
“ ” or “ ” or OK button to reset the picture
modes to factory default settings.
Store
Press “ ” or “ ” button to change the preset.
In equalizer menu, the preset can be changed
to Music, Movie, Speech, Flat, Classic and
User.
Press “ ” or “ ” button to select Store. Press “
” or OK button to store the settings. “Stored...”
will be displayed on the screen.
Select the desired frequency by pressing “
” or “ ” button and increase or decrease the
frequency gain by pressing “ ” or “ ” button.
Press the “M” button to return to the previous
menu.
Note: Equalizer menu settings can be changed only
when the Equalizer Mode is in User.
Balance
This setting is used for emphasizing left or right
speaker balance.
English - 34 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 34
05.03.2009 12:38:30
Press “ ” or “ ” button to select Balance.
Press “ ” or “ ” button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.
Store
Headphone
Feature Menu
Press “ ” or “ ” button to select Headphone.
Press “ ” button to view the headphone
menu.
Press “ ” or “ ” button to select Store. Press “
” or OK button to store the settings. “Stored...”
will be displayed on the screen.
Headphone sub-menu options are described
below:
Volume
Press “ ” or “ ” button to select Volume. Press
“ ” button to increase headphone volume
level. Press “ ” button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63.
Store
Press “ ” or “ ” button to select Store. Press “
” or OK button to store the settings. “Stored...”
will be displayed on the screen.
Sound Mode
Pip-Pap
In the Feature menu, highlight PIP item by
pressing “ ” or “ ” buttons. Press “ ” button
to enter PIP submenu:
Press “ ” or “ ” button to select Sound Mode.
Using “ ” or “ ” button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fixed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press “ ” or “ ” button to select AVL. Press “ ”
or “ ” button to set the AVL as On or Off.
Spdif Out
Press “ ” or “ ” button to select Spdif Out.
Press “ ” or “ ” button to set the Spdif Out.
as On or Off.
Note: If Spdif Out is set to On, headphone will be
disabled.
Effect
If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Using “ ” or “ ” button, you can switch to PIP,
PAP mode or turn off the feature.
If the TV is switched to PIP or PAP mode,
Pip-Pap submenu will change accordingly and
the following settings will appear on the same
menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Pip-Pap
This line controls Pip/Pap modes. Use “ ” or “ ”
buttons to switch the TV to Pip, Pap or Off.
Press “ ” or “ ” button to select Effect. Press
“ ” or “ ” button to set as On or Off.
English - 35 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 35
05.03.2009 12:38:31
Pip Size
Using this setting, you can set the size of the
Pip window. Press “ ” or “ ” button to highlight
Pip Size item. Use “ ” or “ ” button to set Pip
Size to Small or Large.
Note: This setting will be inactive if the TV is set to
Pap mode.
PIP Position
Hence, if one of those buttons is pressed, Child
Lock On will be displayed on the screen when
the menu screen is not visible.
Language
Press “ ” or “ ” button to select Language.
Use “ ” or “ ” button to select the Language.
Default Zoom
Positions available are: Bottom Right,Bottom
Left, Top Left and Top Right.
While zoom mode is set as AUTO, the TV will
set the zoom mode in accordance with the
signal of the broadcast. If there is no WSS or
aspect ratio information, the TV will then use this
setting to adopt. Press “ ” or “ ” button to select
Default Zoom. You can set Default Zoom to
Panoramic, 16:9, 4:3 or 14:9 by pressing “
” or “ ” button.
Source
Blue Background
PIP Source setting enables you to select the
source of the sub picture.
If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set Blue Background to On.
This setting is used for moving the sub
picture.
Select PIP Position item by using “ ” or
“ ” button. Use “ ” or “ ” button to adjust PIP
position.
Select PIP Source item by using “ ” or “
” button. Use “ ” or “ ” button to set PIP
source.
Program
This setting will be unavailable to be used.
Swap
Select Swap item by using “ ” or “ ” button.
Use “ ” or “ ” button to set. This function
enables to swap between the main and the
PIP picture.
Note: See Appendix E for all PIP/PAP modes.
Sleep Timer
Press “ ” or “ ” button to select Sleep Timer.
Use “ ” or “ ” button to set the Sleep Timer.
The timer can be programmed between Off and
120 minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press “ ” or “ ” button to select Child Lock.
Use “ ” or “ ” button to set the Child Lock On
or Off. When On is selected, the TV can only
be controlled by the remote control handset. In
this case the control panel buttons (except for
the STANDBY button) will not work.
By pressing “ ” or “ ” button, select Blue
Background. Press “ ” or “ ” button to set
Blue Background as On or Off.
Menu Background
Press “ ” or “ ” button to select Menu
Background. You can set menu background
level by pressing “ ” or “ ” button.
Backlight
This setting controls the backlight level. Select
Backlight by pressing “ ” or “ ” button. Press“
” or “ ” button to set Backlight to Medium,
Maximum, Minimum or Auto.
Menu Timeout
To set a specific display timeout for menu
screens, set a value for this option.
Press “ ” or “ ” button to select Menu Timeout.
Use “ ” or “ ” button to change menu timeout
to 15 sec, 30 sec or 60 sec.
Teletext Language
Press “ ” or “ ” button to select Teletext
Language. Use “ ” or “ ” button to change
Teletext Language to West, East, Turk/Gre,
Cyrillic, Arabic or Persian..
Antenna Power (optional)
When antenna power option is set as On, +5V
will be transmitted to the antenna output.
English - 36 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 36
05.03.2009 12:38:32
This feature enables the use of active
antennas.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Ext Out
Press “ ” or “ ” button to select Ext Out. Use “
” or “ ” button to set the Ext Out as On or Off.
Note:
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.
Install Menu
Fine Tune
Press “ ” or “ ” button to select Fine Tune.
Press “ ” or “ ” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “
” or “ ” button to start programme searching.
You can also enter the desired frequency
using the numeric buttons while Search item
is highlighted.
Store
Press “ ” or “ ” button to select Store. Press “
” or OK button to store the settings. “Stored...”
will be displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install menu
when the TV is in AV modes. Note that limited
options will be available. Switch to TV mode for
viewing complete version of the Install menu.
Program
Press “ ” or “ ” button to select Program. Use
“ ” or “ ” button to select the program number.
You can also enter a number using the numeric
buttons on the remote control. There are 200
programme storage between 0 and 199.
Band
Colour System
Band can be selected either C or S. Press “ ”
or “ ” button to set Band.
Press “ ” or “ ” button to select Colour
System. Use “ ” or “ ” button to change the
colour system to PAL, SECAM, PAL 60 or
AUTO.
Channel
Channel can be changed by “ ” or “ ” button
or numeric buttons.
Colour System
Press “ ” or “ ” button to select Colour System.
Use “ ” or “ ” button to change the colour
system to PAL,SECAM,PAL60,AUTO,NTSC
4,43 or NTSC 3,58.
Sound System
Press “ ” or “ ” button to select Sound System.
Press “ ” or “ ” button to change the sound
system to BG,DK, I, L or L’.
Store
Press “ ” or “ ” button to select Store
Program. Press “ ” or OK button to store the
settings. “Stored...” will be displayed on the
screen.
Program Table
Select Program Table by pressing “ ” or “
” button.
English - 37 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 37
05.03.2009 12:38:33
Country
By moving the cursor in four directions you can
reach 20 programmes in the same page. You
can scroll the pages up or down by pressing the
navigation buttons to see all the programmes
in TV mode (except for the AV modes). By
cursor action, programme selection is done
automatically.
Name
Press “ ” or “ ” button to select your country.
If you want to exit from A.P.S. function, press
the BLUE button.
When you press OK or RED button to start
automatic tuning, all stored programmes will
be erased and the TV will search for available
channels. During the search, the following OSD
will be displayed:
To change the name of a programme, select the
programme and press the RED button.
The first letter of the selected name will be
highlighted. Press “ ” or “ ” button to change
that letter and “ ” or “ ” button to select the
other letters. By pressing the RED button, you
can store the name.
NB. You can also use the alpha-numeric buttons on
the remote control to change the name.
Move
Select the programme which you want to insert
by navigation buttons. Press the GREEN
button. By navigation buttons move the selected
programme to the decided programme space
and press the GREEN button again.
Whenever you press the BLUE button, APS
function stops and Program Table appears on
the screen.
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.
Source Menu
Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or OK button. Source menu
appears on the screen:
Delete
To delete a programme, press the YELLOW
button. Pressing the YELLOW button again
erases the selected programme from the
programme list, and the following programmes
shift one line up.
APS (Auto Programming System)
When you press the BLUE button to start
automatic tuning, Auto Programming System
menu will appear on the screen:
English - 38 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 38
05.03.2009 12:38:34
In source menu, highlight a source by pressing
“ ” or “ ” button and switch to that mode
by pressing “ ” button. Source options are;
TV, DTV/USB, EXT-1, EXT-2, EXT-2S, FAV,
HDMI-1, HDMI-2, HDMI-3, HDMI-4, YPbPr or
PC-VGA.
Note: Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
PC Mode Menu System
See “Connecting the LCD TV to a PC” section
for connecting a PC to the TV set.
For switching to PC source, press “ ” button
on your remote control and select PC input.
You can also use “Source” menu to switch to
PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.
PC Position Menu
Press MENU button.
Select the first icon by pressing “ ” or
“ ” button. PC Position menu appears on the
screen:
H (Horizontal) Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using “ ” or “
” button. Use “ ” or “ ” button to adjust the
value.
V (Vertical) Position
This item shifts the image vertically towards the
top or bottom of the screen.
Select V Position item by using “ ” or “
” button. Use “ ” or “ ” button to adjust the
value.
Phase
Depending on the resolution and scan frequency
that you input to the TV set, you may see a hazy
or noisy picture on the screen. In such a case
you can use this item to get a clear picture by
trial and error method.
Select Phase item by using “ ” or “ ” buttons.
Use “ ” or “ ” button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs
or text in smaller fonts.
Select Dot Clock item by using “ ” or “
” buttons. Use “ ” or “ ” button to adjust the
value.
PC Picture Menu
For adjusting PC picture items, do the
following:
Press the “M” button.
Press “ ” or “ ” button to select the second icon.
PC Picture menu appears on the screen.
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using “ ” or “ ”
buttons. Press OK or “ ”, “ ” button.
Warning: Please ensure auto adjustment is
performed with a full screen image to ensure
best results.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical
to settings defined in TV picture menu under
“Analogue TV Menu System”.
Note: If you set Colour Temp as User, you can define
R, G, B settings manually.
Sound Menu
The items in this menu are described at “Sound
Menu” section explained in “Menu System”.
English - 39 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 39
05.03.2009 12:38:34
Feature Menu
Feature menu settings are identical to the
settings explained in “Feature Menu” section
in “Menu System”.
Source Menu
Source menu settings are identical to the
settings explained in “Source Menu” section
in “Menu System”.
Displaying TV Information
Programme Number , Programme Name ,
Sound Indicator and Zoom Mode information is
displayed on the screen when a new programme
is entered or “INFO” button is pressed.
Mute Function
Press “ ” button to disable sound. Mute
indicator will be displayed in the upper side of
the screen.
To cancel mute, there are two alternatives; the
first one is pressing the “ ” button and the
second one is increasing the volume level.
PIP (Picture-in-Picture) and
PAP (Picture-and-Picture)
Modes
Press the “
” button to switch to PIP mode.
In PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There is 1 size
and 4 positions (upper left, upper right, bottom
left and bottom right) available for the PIP
” button to change the
window. You can use “
PIP position. Aspect Ratio of the PIP window is
fixed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active window
is indicated by a red frame around it. The active
window can be changed by pressing “ ” or “
” button. The status info OSD belongs to active
window. The place of the status OSDs are same
for both windows.
Press the “
mode.
Press the “
” button again to exit the PIP
” button to switch to PAP mode.
In PAP Mode, two pictures with equal sizes are
displayed on the screen. Aspect Ratios of the
windows are fixed.
When you switch to PAP Mode, main window in
PAP Mode will be displayed on the right side of
the screen. The active window can be changed
by pressing “ ” or “ ” button.
Press the “
mode.
” button again to exit the PAP
Picture Mode Selection
By pressing PP button, you can change Picture
Mode settings in accordance with your viewing
requirements. Available options are Dynamic,
Natural and Cinema.
Note : This function will not be available while in PC
mode.
Freezing Picture
You can freeze the picture on the screen by
pressing the “OK” button on the remote control.
Press the “OK” button to freeze picture. Press
again to quit freeze mode.
Zoom Modes
You can change the aspect ratio (image size)
of the TV for viewing the picture in different
zoom modes.
Press “
zoom mode.
” button to directly change the
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.
In PC mode, only 16:9 mode is available.
Auto
When a WSS (Wide Screen Signalling) signal,
which shows the aspect ratio of the picture, is
included in the broadcast signal or the signal
from an external device, the TV automatically
changes the ZOOM mode according to the
WSS signal.
• When the AUTO mode does not function
correctly due to poor WSS signal quality or
when you want to change the ZOOM mode,
change to another ZOOM mode manually.
16:9
This uniformly stretches the left and right sides
of a normal picture (4:3 aspect ratio) to fill the
wide TV screen.
English - 40 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 40
05.03.2009 12:38:35
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect
ratio), use the 16:9 mode to restore the picture
to its original shape.
Zoom
This option zooms to the picture.
4:3
Use to view a normal picture (4:3 aspect ratio)
as this is its original size.
Note: You can shift to screen up or down by pressing
“ ” / “ ” buttons while picture zoom is selected as
Auto, Panoramic, 14:9, Cinema, Subtitle or Zoom.
Teletext
Panoramic
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen,
without making the picture appear unnatural.
Teletext system transmits information such as
news, sports and weather on your TV. Note
that if the signal degrades, for example in
poor/adverse weather conditions, some text
errors may occur or the teletext mode may be
aborted.
Teletext function buttons are listed below:
“
The top and bottom of the picture are slightly
cut off.
14:9
This zooms up the wide picture (14:9 aspect
ratio) to the upper and lower limits of the
screen.
” Teletext On-Off / PAT Mode
Activates teletext mode when pressed once.
Pressing this button again will split the screen
into two windows, one displaying the teletext
and the other displaying the current channel.
Pressing again will quit the teletext mode.
“
” Index
Selects the teletext index page.
“
” Mix
Places the teletext screen over the
programme.
“
Cinema
This zooms up the wide picture (16:9 aspect
ratio) to the full screen.
” Expand
Press once to enlarge top half of the page, press
again to enlarge the bottom half of the page.
Press again to revert back to normal size.
“
” Reveal
Shows hidden information (e.g. solutions of
games).
“
Subtitle
This zooms up the wide picture (16:9 aspect
ratio) with subtitles to the full screen.
” Hold
Holds a text page when convenient. Press again
to resume.
“
” Subcode Pages / Time
Selects subcode pages if available when the
teletext is activated. When the teletext is not
English - 41 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 41
05.03.2009 12:38:36
activated, displays time info if the programme
has teletext transmission.
P+ / P- and numbers (0-9)
Press to select a page.
Note: Most TV stations use code 100 for their index
pages.
Coloured Buttons
(RED/GREEN/YELLOW/BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics.
When FASTEXT system is available, sections in
a teletext page will become colour-coded and can
be selected by pressing the coloured buttons.
Press a coloured button that corresponds to
with your needs.
The coloured writings will appear, showing you
which coloured buttons to use when TOP text
transmission is present. Pressing P - or P +
commands will request the next or previous
page respectively.
Tips
Mountains or high buildings can cause double
pictures or ghost images. Sometimes you can
improve the picture quality by changing the
direction of the aerial.
Is the picture or teletext unrecognisable? Check
if you have entered the correct frequency.
Please retune the channels.
The picture quality may degrade when two
peripherals are connected to the TV at the
same time. In such a case, disconnect one of
the peripherals.
No Picture
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the
aerial cable damaged? Are suitable plugs used
to connect the aerial? If you are in doubt, consult
your dealer.
No Picture means that your TV is not receiving
a transmission. Have you selected the correct
button on the remote control? Try once more.
Also make sure the correct input source has
been selected.
Sound
Screen Care
Clean the screen with a slightly damp, soft
cloth. Do not use abrasive solvents as they may
damage the coating layer of the TV screen.
For your safety, unplug the mains plug when
cleaning the set. When moving the TV, support
it from the base.
Image Persistence
Please note that ghosting may occur while
displaying a persistent image. LCD TVs’ image
persistence may disappear after a short time.
Try turning off the TV for a while.
To avoid this, do not leave a still picture on the
screen for extended periods.
No Power
If your TV system has no power, please check
the main power cable and connection to the
mains socket outlet.
You can not hear any sound. Did you perhaps
interrupt the sound, pressing the
button?
Sound is coming from only one of the speakers.
Is the balance set to one extreme? See Sound
Menu.
Remote Control
Your TV no longer responds to the remote
control. Perhaps the batteries are exhausted.
If so you can still use the local buttons at the
side of the TV.
Input Sources
If you cannot select an input source, it is possible
that no device is connected.
Check the AV cables and connections if you
have tried to connect a device.
Poor Picture
Have you selected the correct TV system? Is
your TV set or house aerial located too close
to a non-earthed audio equipment or neon
lights, etc.?
English - 42 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 42
05.03.2009 12:38:37
Appendix A: PC Input Typical Display Modes
The display has a maximum resolution of 1920 x 1200. The following table is an illustration of
some of the typical video display modes.
Your TV may not support different resolutions. Supported resolution modes are listed below.
If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Note: Resolution modes indicated with (*) are not available for PIP/PAP modes.
Resolution
Frequency
Hor
Ver
Ver (Hz)
Hor
(KHz)
Standard
Supported
Zoom Modes
1
640
350
85
37.9
VESA
16:9, 4:3
2
640
400
85
37.9
VESA
16:9, 4:3
3
640
400
70
31.5
IBM VGA
16:9, 4:3
4
640
480
60
31.5
VESA
16:9, 4:3
5
640
480
66
35.0
MAC
16:9, 4:3
6
640
480
72
37.9
VESA
16:9, 4:3
7
640
480
75
37.5
VESA
16:9, 4:3
8
640
480
85
43.3
VESA
16:9, 4:3
9
800
600
56
35.2
VESA
16:9, 4:3
10
800
600
60
37.9
VESA
11
800
600
70
43.8
12
800
600
72
48.1
VESA
16:9, 4:3
13
800
600
75
46.9
VESA
16:9, 4:3
14
800
600
85
53.7
VESA
16:9, 4:3
15
832
624
75
49.7
MAC
16:9, 4:3
16
1024
768
43
35.5
VESA
(interlace)
16:9, 4:3
17
1024
768
60
48.4
VESA
16:9, 4:3
18*
1024
768
70
56.5
VESA
19*
1024
768
72
57.7
16:9, 4:3
20*
1024
768
75
60.0
16:9, 4:3
21*
1024
768
85
68.3
16:9, 4:3
22
1152
864
60
53.8
23*
1152
864
70
64.2
VESA
16:9, 4:3
24*
1152
864
75
67.5
VESA
16:9, 4:3
25*
1152
864
85
77.1
VESA
16:9, 4:3
26*
1152
870
75
68.9
MAC
16:9, 4:3
27
1280
768
60
47.7
VESA
28
1360
768
60
47.7
29*
1280
768
75
60.2
VESA
16:9, 4:3
30
1280
960
60
60.0
VESA
16:9, 4:3
31*
1280
960
75
75.0
VESA
16:9, 4:3
32*
1280
960
85
85.9
VESA
16:9, 4:3
33
1280
1024
60
64.0
VESA
16:9
34*
1280
1024
75
80.0
VESA
16:9
35*
1280
1024
85
91.1
VESA
36
1400
1050
60
65.3
16:9
37*
1400
1050
75
82.3
16:9
38
1440
900
60
55.9
16:9
39*
1440
900
75
70.6
40*
1600
1200
60
75.0
41
1680
1050
60
65.3
16:9
42*
1920
1200
60
74.5
16:9
Index
16:9, 4:3
16:9, 4:3
16:9, 4:3
16:9, 4:3
16:9, 4:3
16:9, 4:3
16:9
16:9
VESA
16:9
English - 43 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 43
05.03.2009 12:38:37
Appendix B: AV and HDMI Signal Compatibility (Input Signal
Types)
Source
EXT-1
(SCART 1)
EXT-2
(SCART-2)
FAV
YPbPr
HDMI1
HDMI2
HDMI3
HDMI4
Supported Signals
Available
PAL 50/60
O
NTSC 60
O
RGB 50
O
RGB 60
O
PAL 50/60
O
NTSC 60
O
RGB 50
X
RGB 60
X
S-VHS 50
O
S-VHS 60
O
PAL 50/60
O
NTSC 60
O
480I
60Hz
O
480P
60Hz
O
576I
50Hz
O
576P
50Hz
O
720P
50Hz
O
720P
60Hz
O
1080I
50Hz
O
1080I
60Hz
O
480I
60Hz
O
480P
60Hz
O
576I
50Hz
O
576P
50Hz
O
720P
50Hz
O
720P
60Hz
O
1080I
50Hz
O
1080I
60Hz
O
1080P
50Hz
O
1080P
60Hz
O
1080P
24 HZ
O
(X: Not Available, O: Available)
Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may
be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do
expereince such a problem please contact your dealer and also the manufacturer of the source
equipment.
English - 44 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 44
05.03.2009 12:38:37
Appendix C: Pin Specifications
SCART connector pin specifications
Pin
Input signal
Pin
1
AUDIO OUT (RIGHT)
12
Input signal
Not used
2
AUDIO IN (RIGHT)
13
RGB-R GND
3
AUDIO OUT (LEFT/MONO)
14
GND
4
AUDIO GND
15
RGB-R / S.VHS CHROMINANCE IN
5
RGB-B GND
16
BLANKING SIGNAL
6
AUDIO IN (LEFT/MONO)
17
COMPOSITE VIDEO GND
7
RGB-B IN
18
BLANKING SIGNAL GND
8
AUDIO / RGB SWITCH / 16:9
19
COMPOSITE VIDEO OUT
9
RGB-G GND
20
COMPOSITE VIDEO / S.VHS LUMINANCE IN
10
Not used
21
GND / SHIELD (CHASSIS)
11
RGB-G IN
HDMI connector pin specifications
Pin
Input signal
Pin
Input signal
1
TMDS Data2+
11
TMDS Clock Shield
2
TMDS Data2 Shield
12
TMDS Clock-
3
TMDS Data 2-
13
CEC
4
TMDS Data 1+
14
Reserved (N.C. on device)
5
TMDS Data1 Shield
15
SCL
6
TMDS Data1-
16
SDA
DDC/CED Ground
7
TMDS Data0+
17
8
TMDS Data0 Shield
18
+5V Power
9
TMDS Data0-
19
Hot Plug Detect
10
TMDS Clock+
Signal Input
PC RGB Terminal (D-sub 15-pin connector)
Pin
Input signal
1
R
G or sync on green
B
No connection
No connection
R.GND
G.GND
B.GND
No connection
GND
No connection
[SDA]
H.sync or H/V composite sync
V.sync. [V.CLK]
[SCL]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
English - 45 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 45
05.03.2009 12:38:37
Appendix E: PIP/PAP Mode Combinations
MAIN
TV
DTV/
USB
TV
8
8
(RGB)
9
DTV/
USB
8
9
8
9
(RGB)
9
Scart2
8
9
8
9
(RGB)
Scart2S
8
9
(RGB)
FAV
8
9
HDMI1
9
HDMI2
Scart1 Scart2
HDMI1 HDMI2 HDMI3 HDMI4 YPbPr
PCVGA
Scart2S
FAV
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
(RGB)
(RGB)
(RGB)
9
9
9
9
9
9
8
8
8
9
9
9
9
9
9
9
8
8
8
9
9
9
9
9
9
(RGB)
9
8
8
8
9
9
9
9
9
9
9
9
9
9
9
8
8
8
8
9
9
9
9
9
9
9
9
8
8
8
8
9
9
HDMI3
9
9
9
9
9
9
8
8
8
8
9
9
HDMI4
9
9
9
9
9
9
8
8
8
8
9
9
YPbPr
9
9
9
9
9
9
9
9
9
9
8
9
PCVGA
9
9
9
9
9
9
9
9
9
9
9
8
Scart1
(RGB): This indicates that, selection is possible only if Scart-1 has a RGB signal.
Restrictions: Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2,
Scart-2 S, FAV.
If these sources are set to main window, and Scart-1 does not have a RGB signal, Pip\Pap source
can not be switched to the Scart-1 source.
If scart-1 source is set to main window, and scart-1 does not have a RGB signal, Pip\Pap source
can not be switched to TV, Scart-2, Scart-2 S and FAV sources.
English - 46 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 46
05.03.2009 12:38:37
Appendix D: Supported File Formats for USB Mode
Media
Music
Remarks
Format
File
Extension
Video
Audio
(Maximum resolution/Bit rate etc.)
-
-
PCM
MPEG 1/2
Sample Rate: 8K ~ 48KHz
.mp3
-
Layer 1/ 2/
.wma
-
Sample Rate: 8K ~ 48KHz, Bit Rate:
32K~320Kbps
3 (MP3)
.jpg
Baseline
JPEG
WMA
Sample Rate: 8K ~ 48KHz, Bit Rate: 5K ~
192Kbps
WxH = 14592x12288, Up to 179 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
Up to 4 Mega-pixel
Progressive
JPEG
Support format: 444/ 440/ 422/ 420/ Grayscale
.gif
GIF
WxH = 14592x12288, Up to 179 Mega-pixel
.bmp
bit map
WxH = 14592x12288, Up to 179 Mega-pixel
Photo
English - 47 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 47
05.03.2009 12:38:37
Specifications
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile
for UK
Frequency range: 474-850 MHz for UK models
Digital
Reception
170-862 MHz for EU models
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
NUMBER OF PRESET CHANNELS
200
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50 Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWER (WRMS.) (10% THD)
2x8
POWER CONSUMPTION (W)
150 W (max)
< 1 W (Standby)
PANEL
32” Wide Screen
DIMENSIONS (mm)
DxLxH (With foot): 212 x 776 x 567
Weight (Kg): 12.35
DxLxH (Without foot): 94 x 776 x 524
Weight (Kg): 11.65
English - 48 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 48
05.03.2009 12:38:37
UK Guarantee
Your Guarantee of Excellence
Thank you for purchasing this Hitachi Television.
In the unlikely event that this product should develop a fault, we undertake to replace or repair
any part of the product which fails due to a manufacturing defect within 12 months of the date of
purchase provided that:
i) The product has been installed and used only in accordance with the instructions supplied with
the product
ii) The product has not been repaired, maintained, or modified by any person other than an Hitachi
authorised engineer
iii) The product serial number has not been removed or altered
This guarantee does not apply to product acquired second hand or for commercial or communal
use
This guarantee does not cover the replacement of exhausted batteries, the adjustment of user
controls, or aerial alignment.
Any parts replaced under this guarantee shall become the property of Hitachi Europe Ltd.
Please note that evidence of the date of purchase will be required before any service under this
guarantee is carried out.
THIS GUARANTEE DOES NOT AFFECT YOUR STATUTORY RIGHTS.
IN ALL CASES OF DIFFICULTY PLEASE CONSULT YOUR HITACHI DEALER
English - 49 A00-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061095_50141197.indd 49
05.03.2009 12:38:37
Hitachi Ltd.
Consumer Business Group
Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome,
Chiyoda-Ku, Tokyo 100-0004 Japan
HITACHI EUROPE LTD.
Consumer Affairs Department
PO Box 3007
Maidenhead
Berkshire SL6 8ZE
UNITED KINGDOM
Tel: 0870 405 4405
Email: consumer.mail@hitachi-eu.com
HITACHI EUROPE S.A.
364, Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens
GREECE
Tel: 210 6837200
Fax: 210 6835694
Email: dmgservice.gr@hitachi-eu.com
HITACHI EUROPE GmbH
Am Seestern 18
40547 Düsseldorf
GERMANY
Tel: 211-5283-808
Fax: 211-5283-809
Hotline: 0180 - 551 25 51 (12ct/min.)
Email: Service.germany@hitachi-eu.com
HITACHI EUROPE S.A.
Gran Via Carles III, 86 Planta 5ª
Edificios Trade - Torre Este
08028 Barcelona
SPAIN
Tel: 902 56 57 03
HITACHI EUROPE S.r.l.
Via T. Gulli, 39
20147 MILANO
ITALY
HITACHI EUROPE AB
Frösundaviks Alle 15
169 29 Solna
SWEDEN
50141197
HITACHI EUROPE S.A.S
Digital Media Group
77 Rue Alexandre Dumas
69120 Vaulx en Velin
FRANCE
Tel: 04 37 42 84 30
Email: france.consommateur@hitachi-eu.com
www.hitachidigitalmedia.com
䍏噅剟偁䝅ⵛ䝂崭䵂㌵彉䑔嘭偁久啟义䍋䕌ㅟ㌲㠵㙗弱〵さ䭟㄰〶㄰㤵張〱㐱ㄹ
〴⁍慲琠㈰〹⃇慲﹡浢愠ㄴ㨰㌺〴
Download PDF

advertising