Southern Welding Systems International LLC
Welding | Industrial | Safety
International Wholesale Distribution
Contact us for Pricing:
Phone: 281-485-9772 | Fax: 281-485-4386
Email: Sales@swsintl.com | Website: www.swsitnl.com
Address: 3908 1st Street Pearland, Texas 77581
ENGINE DRIVEN
Product
Guide
Page
Class
Stick
MIG
Flux-Cored*
AC TIG
DC TIG
PAC**
CAC-A
MillerWelds.com/EngineDriven
Blue Star® 145 DX
52
Blue Star® 185 DX
52
Wildcat® 200
Bobcat™ 225
Bobcat™ 250
Trailblazer® 275 DC
Weldable Metals
Optional lift eye,
running gear
Steel
4500
40–145 DC
6000
55–185 DC
Lift eye,
pickup mount,
optional
running gear,
Steel
6500
50–200 DC Subaru
Compact, lightweight
Maintenance, repair,
farm/ranch
Steel, alum, stainless
11,000
70–150 AC Kohler,
50–225 DC Subaru
Cost-effective AC/DC Stick
Maintenance, farm/ranch,
construction
1-Ph /10,500
3-Ph /11,000
50–225 AC Kohler
50–225 DC
Backup power for pivot
irrigation
Farm/ranch
3⁄ 16"
11,000
12,000 with EFI
40–250 CC
90–275 CV
Kohler,
Subaru
Industry’s most popular
engine drive, optional EFI
Fab, maintenance,
farm/ranch, construction
3⁄ 16"
11,000
12,000 with EFI
10–275 DC Kohler,
Subaru
Industry’s best performing
engine drive, optional EFI
Fab, structural, maintenance,
repair, piping
52 54 54
56 54
Welding
Amperage Engine
Range
Brand
Special Features
See options at Compact, portable
MillerWelds.com Compact, portable
Typical Applications
Maintenance, service trucks
Maintenance, service trucks
56
3⁄ 16"
11,000
12,000 with EFI
30–225 AC Kohler,
10–325 DC Subaru
Industry’s best performing
engine drive, optional EFI
Fab, structural, maintenance,
repair, piping
Trailblazer® 302
Air Pak™
58
3⁄ 16"
13,000
30–225 AC Kohler
10–350 DC
AC/DC, CC/CV, 31 CFM air,
battery charge/jump start
Service/maintenance,
construction
Bobcat™ 250 Diesel
60
Steel, alum, stainless
11,000
40–250 CC
90–275 CV
Contractor’s choice,
AC/DC Stick, strong FCAW
Fab, maintenance, farm,
construction
Steel, alum, stainless
11,000
30–225 AC Kubota
10–325 DC
Pro’s choice,
premium arc quality
Fab, structural, maintenance,
repair, piping
Steel, stainless
12,000
20–410 DC CAT, Kubota,
Mitsubishi
Low-speed engine,
compact, rugged, quiet
Pipe, structural, construction
Steel, stainless
12,000
20–400 DC CAT, Mitsubishi
Premium pipe arc
Pipe, structural
Steel, stainless
12,000
5–450 DC
Multioperator engine drive
Construction, fab, pipe
Construction, rental
Trailblazer® 302 Diesel
Big Blue® 300 Pro
Big Blue® 350 PipePro®
Big Blue® 450 Duo CST ™
Big Blue® 400 Eco Pro
Big Blue® 400
Big Blue® 500
Big Blue® 700 Duo Pro
Big Blue® Turbo
Big Blue® Air Pak™
60 61
3⁄ 16"
3⁄ 16"
1⁄ 4"
⁄
64 ⁄
63 ⁄
63 ⁄
63 ⁄
64 ⁄
65 ⁄
65 ⁄
1 4"
62
Lift eye,
optional
running gear,
trailer
Lift eye,
pickup mount,
optional trailer
1 4"
5 16"
5 16"
3 8"
3 8"
Lift eye,
generally
mounted on
optional trailer
Kubota
Mitsubishi
Steel, stainless
5500
20–500 DC Mitsubishi
Compact, fuel efficient
Steel, stainless
5500
15–500 DC Deutz, Perkins
Engine and process choice
Offshore, construction, rental
Steel, stainless
5500
20–600 DC Deutz
Engine and process choice
Offshore, construction, rental
Steel, stainless
32,000
15–600 DC Deutz
Multioperator engine drive
Pipe, structural, rental
1 2"
Steel, stainless
5500
20–750 DC Deutz
Turbo for high altitude
Construction, mining
1 2"
Steel, alum, stainless
5500
20–750 DC Deutz
AC on Deluxe model
Repair, mining, railroad
Why buy
a GAS
or DIESEL
engine?
Gasoline Advantages
EFI Advantages (vs. Carburetor Models)
Diesel Advantages
product cost (by 50 to 70 percent)
• Lower
size and less weight
• Smaller
expensive engine repairs
• Less
warranties
• Better
• Easier cold weather starting
to 27 percent better fuel economy
• 12
emissions (approx. 1/3 lower)
• Reduced
starting in all climates (no choke)
• Easy
of carburetor icing
• Elimination
• Better high altitude performance
20 to 40 percent less fuel than carburetor gas
• Uses
to 2-1/2 times the engine life
• 1-1/2
on some job sites for safety
• Required
have longer maintenance intervals
• Typically
• Convenient if other equipment is diesel
PRODUCT KEY
CLASS:
Light Industrial
Industrial
Heavy Industrial
CAPABILITY:
Designed for this process
Capable of this process
New! or Improved! products appear in blue type. *If using self-shielded wire, use CV weld output. **With appropriate Spectrum, see engine-driven product descriptions.
For more detailed information, see individual specification sheets.
Diesel
Trailblazer® 302
Gasoline
Bobcat™ 3 Phase
Portability
Std.
Generator
Pwr. (Watts)
51
ENGINE DRIVEN
Blue Star® 145 DX and 185 DX
Light Industrial
Processes
• Stick (SMAW) • TIG (GTAW)
See Literature No. ED/2.5
Reliable outdoor portable power! Great for farm, ranch, maintenance, construction and hobbyist.
Gasoline Engines
See options at MillerWelds.com
Most Popular Accessories
Compact and portable, its small footprint
uses little truck space. Optional running gear
also makes the Blue Star one-man portable.
Includes electric start, five-gallon fuel
capacity, auto-idle and engine hour meter.
Receptacle covers improve reliability by
protecting receptacles from debris.
Blue Star 185 DX
Blue Star 145 DX
Accu-Rated™ peak generator power is
usable for maximum generator loads such
as plasma cutting, Millermatic® MIG welders
and motor starting.
Millermatic 140 Auto-Set
• #907
335 (pg 8)
Millermatic
• #907 312 (pg1808)Auto-Set
Lifting Eye #195 353 (pg 82)
• No.
38 Running Gear #195 352
• (pg 82)
Protective Cover #195 193 (pg 82)
• (not
for use with running gear)
• No. 2 Stick Cable Set (pg 86)
®
™
®
™
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Gasoline
*Additional models are available — visit MillerWelds.com or your distributor.
Model
Stock Number*
Welding
Mode/Process
Amperage
Range
Blue Star 145 DX
(#907 544) with GFCI
(#907 544-001) with standard receptacles
CC/DC
(Stick/TIG)
Blue Star 185 DX
(#907 545) with GFCI
(#907 545-001) with standard receptacles
CC/DC
(Stick/TIG)
Wildcat 200
Rated Output at 104° F (40° C)
Single-Phase Generator
Power at 104° F (40° C)
40 –145
145 A at 25 V, 20% Duty Cycle
100 A at 25 V, 60% Duty Cycle
Peak: 4500 watts
Continuous: 4000 watts
55 –185
185 A at 25 V, 20% Duty Cycle
130 A at 25 V, 60% Duty Cycle
Peak: 6000 watts
Continuous: 5500 watts
H: 22.75 in. (578 mm)
W: 22.75 in. (578 mm)
D: 31.625 in. (803 mm)
Light Industrial
®
Net
Weight
Dimensions
309 lb.
(140 kg)
315 lb.
(143 kg)
Industrial
See Literature No. ED/3.0
Compact, lightweight, durable and cost effective machine is designed for the contractor and is
great for maintenance/repair, farm and ranch applications.
Fully enclosed durable case provides a fully protected engine to
ensure long-term engine reliability.
Accu-Rated™ 6500 watts of usable peak power cranks out
enough power for many construction, maintenance/repair, and
farm/ranch applications. 5500 watts of continuous power.
12 hours of run time is provided by a seven-gallon fuel tank when
using a typical 1/8-inch stick electrode.
Tested and rated at 104 degrees Fahrenheit (40° C) to ensure
consistent operation of the welder and generator in all climates.
Heavy duty construction ensures protection from rough handling or
the elements to keep you making money, rather than spending it.
Compact design takes up less truck space, is 20 inches wide to
fit on service truck tool boxes and is only 24 inches tall allowing
visibility out of the rear window when truck mounted.
Processes
• Stick (SMAW) • TIG (GTAW)
Gasoline Engine
Subaru EX40: 14 HP at 3600 RPM
One-cylinder, four-cycle, overhead cam,
industrial, air-cooled
Note: Engine is warranted separately
by engine manufacturer.
Most Popular Accessories
140 Auto-Set
• Millermatic
#907 335 (pg 8)
180 Auto-Set
• Millermatic
#907 312 (pg 8)
375 X-TREME
• Spectrum
Plasma Cutter #907 339 (pg 70)
Cord, Full KVA #300 517
• Adapter
(pg 82)
200 Running Gear
• Wildcat
#300 532 (pg 82)
Cover #300 496 (pg 82)
• Protective
(not for use with running gear)
®
™
®
™
®
™
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Standard maintenance displays and front panel mounted engine
controls make the Wildcat easy to service and operate.
Gasoline
*Additional models are available — visit MillerWelds.com or your distributor.
52
Stock Number*
(#907 546) Subaru with GFCI
(#907 546-001) Subaru
Welding Mode/Process
Amperage Range
Rated Output at 104° F (40° C)
Single-Phase Generator Power at
104° F (40° C)
CC/DC
(Stick/TIG)
50 –200
200 A at 25 V, 20% Duty Cycle
150 A at 25 V, 100% Duty Cycle
Peak: 6500 watts
Continuous: 5500 watts
Dimensions
Net Weight
H: 24.75 in. (629 mm)
W: 20 in. (508 mm)
D: 35.5 in. (902 mm)
345 lb. (159 kg)
ENGINE
DRIVEN
Choose the Right Gas Engine Drive
Bobcat
™
Trailblazer® (page 56)
(page 54)
The most popular welder/generator
UPGRADE
Product Description
The best performer in the industry
UPGRADE
UPGRADE
Bobcat™ 225
Bobcat™ 250
Trailblazer® 275 DC
Trailblazer® 302
Cost-effective,
multiprocess machine
primarily used for Stick
welding is great for farm,
ranch, maintenance/repair
operations, and as a
stand-alone generator.
Rugged engine drive is
great for Stick and
Flux-Cored welding and is
designed for maintenance/
repair operations,
construction, farm, ranch
and generator use.
Unbeatable Stick, Wire, and
DC TIG arc performance, and
the independent weld and
generator system are ideal
for construction, fabrication,
and maintenance/repair
operations.
High output, unbeatable
arc performance, and
the independent weld
and generator system
make this perfect for
construction, fabrication,
and maintenance/repair
operations.
Stick – DC
Good/Very Good
Very Good
Excellent
Excellent
Stick – AC (AC electrode)
Very Good
Very Good
—
Very Good
MIG – Wire (Solid/FCAW), Steel
Fair
Good
Excellent
Excellent (325 Amps)
MIG – Wire, Aluminum w/Spool Gun
Fair
Good
Excellent
Excellent (325 Amps)
TIG – DC, Steel
Good
Very Good
Excellent
Excellent
TIG – AC, Aluminum w/H.F.*
Fair
Fair/Good
—
Very Good
Watts
11,000 Watts
11,000 Watts/12,000 with EFI
11,000 Watts/12,000 with EFI
11,000 Watts/12,000 with EFI
Power Quality
Very Good
Very Good
Very Good/Excellent
Very Good/Excellent
Power While Welding
Fair/Good
With voltage control set
near maximum
Good
Easier to fine tune arc with
voltage control near maximum
Excellent
Independent weld and generator
— no interaction between tools
and the welding arc
Excellent
Independent weld and generator
— no interaction between tools
and the welding arc
Fuel Capacity
12 gallon
12 gallon
12 gallon
12 gallon
Digital Meters with SunVision™
No
No
Yes
Yes
Stick: DIG/Adaptive Hot Start™
No
No
Yes
Yes
Maintenance Displays
Hours/Oil Change
Hours/Oil Change/Fuel
Hours/Oil Change/Fuel/RPMs
Hours/Oil Change/Fuel/RPMs
Polarity Switch
Yes
Yes
No
Yes
14-pin Remote Receptacle
No
No
Yes
Yes
Sound at Max Power
73 dB at 225 amps
72.5 dB at 250 amps
75.5 dB at 275 amps
75.5 dB at 300 amps
Size (H x W x D)
28 x 20 x 40.5 in.
28 x 20 x 40.5 in.
28 x 20 x 45.5 in.
28 x 20 x 45.5 in.
Sound Change
1/4 less noise
1/3 less noise
Daily Maintenance
Easy oil checks
Easy oil checks
Size
5 inches shorter
5 inches shorter
Weld Performance
Generator
Key Features
New Bobcat Features
*High Frequency Arc Starter and Stabilizer
53
ENGINE DRIVEN
Bobcat Series
™
Our Bobcat engine-driven welder/generators have been the top-selling in their class
because they are engineered to be reliable, powerful and durable from the start.
Available
First Quarter!
The most popular
welder/generator in
the industry is getting
better. Building on
its exceptional value,
the new Bobcats are:
Quieter to operate
Smaller and lighter
More fuel efficient
with EFI
Easier to maintain
•
•
•
•
Bobcat 250
Bobcat 3 Phase
Bobcat 225
IMPROVED!
Quieter
and better
sound.
Significant
improvements
in sound level
and quality offer better jobsite communication,
which provides a safer, more efficient working
environment for you and your crew. New Bobcat
welder/generators have rotated the engine toward
the front to create more efficient airflow, resulting
in significantly quieter operation. Now you can
start your job earlier in the day and end it later,
as well as work around hospitals, businesses, and
residential areas.
IMPROVED!
Smaller and
lighter design.
New Bobcat
welder/
generators take
up less space on
trucks and trailers — leaving more room for other
equipment and tools. Plus, they’re easier to move
around jobsites — even with weld cables and
running gear attached.
54
IMPROVED! Easier maintenance. Easy-to-read
front panel maintenance displays show when
your equipment needs to be serviced. With the
intuitive design, the daily maintenance is faster
and easier:
Oil checks from the top by the front panel
Toolless panels that allow for quick access
Single-side fuel fill and oil drain/filter
•
•
•
Smooth power. Better power means better
performance. Our Bobcat welder/generators have
smoother power — not the spiked power found
with other brands — because of:
Revolutionary ten-degree skewed-rotor design
Optimized generator performance
•
•
Accu-Rated™– not inflated generator power.
Our Accu-Rated peak power is usable for
maximum generator loads, including plasma
cutters, wire welders and motor starting. It also
beats the competition’s very short-duration peak
or surge power. Accu-Rated power delivers:
11,000 watts (12,000 with EFI available on the
Bobcat 250) of usable peak power
Peak power delivered for a minimum of
30 seconds
•
•
Large 12-gallon fuel capacity means many
hours of run time before refueling.
Versatile AC and DC weld output provides
quality welds on all types of metals. DC is smooth
and easy to run while AC Stick is used when arc
blow occurs.
Maintenance displays show engine hours and
hours left before an oil change is due.
Super-tough protective armor with covers
has high-impact resistance in all temperatures
and is chemical-resistant. Other applications
include: automotive bumpers, tractor hoods
and panels, lawn mower decks, large structural
parts, etc.
Output stud and receptacle covers as required
by OSHA and CSA for jobsite safety.
Fully enclosed case provides reduced sound
levels and fully protects the engine.
Welding and power ratings are at 104 degrees
Fahrenheit (40° C) — highest in its class to
ensure reliable performance.
Heavy-duty construction. All internal components
are designed to handle the harshest environments
and will run better and last longer.
ENGINE
DRIVEN
Bobcat 225 (Gas) See Literature No. ED/4.4
Industrial
225 and 3 Phase models
Heavy Industrial
250 model
Cost-effective, multiprocess machine primarily used for Stick welding. Great for farm, ranch,
maintenance/repair operations and as a stand-alone generator.
Processes
™
Stick (SMAW)
• AC/DC
MIG
(GMAW)
• Flux-Cored (FCAW)
• AC /DC TIG (GTAW)
• Air Carbon Arc Cutting and Gouging
• (CAC-A) (rated 3/16-in. carbons,
1
1
2
Bobcat 3 Phase (Gas) See Literature No. ED/4.33
™
3
Designed for farm and ranch owners in need of single- and three-phase power to run 480 V
three-phase pivot irrigation systems or to provide backup power for home, farm and ranch.
capable 1/4-in. carbons)
1 With
voltage-sensing feeder only.
Dynasty® 200 Series or
HF-251 (non-critical).
3 Bobcat 250 model only.
2 With
Gasoline/LP Engines
Bobcat 250 (Gas or LP) Additional Features
™
See Literature No. ED/4.4
Rugged engine drive is great for Stick and Flux-Cored welding, adds ability to Carbon Arc gouge,
and is designed for maintenance/repair operations, construction, farm/ranch, and generator use.
Front panel fuel gauge provides convenient fuel
level indication.
Note: Engines are warranted separately
by engine manufacturer.
Electronic Fuel Injection (EFI) —
Smoother weld output and better generator power
while welding.
More weld output than 225-amp welder generators
for more versatility. 72 percent more power for
MIG/FCAW, 67 percent more for AC welding, and
11 percent more for DC Stick.
Recommended Option
Most Popular Accessories
EFI gas engines optimize
the air/fuel ratio for all
engine speeds and engine
loads, resulting in lower operational costs,
fewer emissions, longer runtimes and better
performance when compared to carbureted
models. The payback from fuel savings alone
is a matter of months. EFI will give you:
Gasoline/LP
Notes: Jobsites may require GFCI protection. See gas engine drive comparison chart on page 53.
*Additional models are available — visit MillerWelds.com or your distributor. See page 60 for Bobcat 250 diesel model. **Liquid Withdrawal LP System.
Stock Number*
Bobcat
225
(#907 498) Kohler with GFCI
(#907 498-001) Kohler
(#907 499) Subaru
Bobcat
3 Phase
(#907 505) Kohler with GFCI
Bobcat
250
(#907 500) Kohler with GFCI
(#907 500-001) Kohler
(#907 501) Subaru
(#907 502) EFI Kohler
(#907 504) LP Kohler with GFCI
(order #300 917 Hose and LP Tank
Mounting Assembly separately)**
SuitCase X-TREME Wire Feeders
• (pg
23)
200 Series (pg 38)
• Dynasty
Spectrum
• 375 X-TREMEPlasma#907Cutters
339 (pg 70)
®
watts of generator power and more
• 12,000
weld output
starts with no choke required
• Easy
Reliable
even with infrequent use —
• less proneoperation,
to fuel deterioration
efficiency — use up to 27 percent less fuel
• Fuel
Fewer
emissions — 27 percent less CO and
• 33 percent
lower HC+NOx levels
Model
Gas — Kohler CH 730 or
Subaru EH 65: 23 HP at 3600 RPM
EFI Gas — Kohler ECH 730:
25 HP at 3600 RPM
LP — Kohler CH 730:
25 HP at 3600 RPM
V-twin-cylinder, four-cycle, overhead
valve, industrial, air-cooled
Welding
Mode
Process
Amp/Volt
Ranges
Rated Output at 104° F (40° C)
CC/AC
Stick/TIG
70 –150 A
150 A at 25 V, 100% Duty Cycle
CC/DC
Stick/TIG
50 – 225 A
225 A at 25 V, 100% Duty Cycle
CV/DC
MIG/FCAW
19 – 28 V
200 A at 20 V, 100% Duty Cycle
CC/AC
Stick/TIG
50 – 200 A
200 A at 25 V, 100% Duty Cycle
CC/DC
Stick/TIG
50 – 225 A
210 A at 25 V, 100% Duty Cycle
CV/DC
MIG/FCAW
19 – 28 V
200 A at 20 V, 100% Duty Cycle
CC/AC
Stick/TIG
40 – 250 A
250 A at 25 V, 60% Duty Cycle
225 A at 25 V, 100% Duty Cycle
CC/DC
Stick/TIG
40 – 250 A
250 A at 25 V, 100% Duty Cycle
CV/DC
MIG/FCAW
17 – 28 V
275 A at 25 V, 60% Duty Cycle
250 A at 28 V, 100% Duty Cycle
™
®
®
™
•
•
•
•
•
•
•
•
•
•
625 X-TREME™ #907 404 (pg 70)
Adapter Cord, Full KVA #300 517
(pg 82)
Single-Phase Full KVA Plug Kit
#119 172 (pg 82)
Remote Oil Drain/Filter Kits (pg 83)
Hose and LP Tank Mounting
Assembly #300 917 (pg 83)
Multi-Terrain Running Gear (pg 83)
#300 913 with Inner Tubes
#300 914 with Never Flat™ tires
Off-Road Running Gear (pg 83)
#300 909 with Inner Tubes
#300 910 with Never Flat™ tires
Protective Cage with Cable
Holders #300 921 (pg 83)
Protective Cover (pg 83)
HWY-1000 Trailer #195 013 (pg 84)
Engine Tune Up Kits are available
from your Miller parts distributor.
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Generator Power
at 104° F (40° C)
Single-Phase
Peak: 11,000 watts
Continuous: 9500 watts
Single-Phase/Three-Phase
Peak: 11,000 watts
Continuous:
9500 watts/10,000 watts
Single-Phase
Peak: 11,000 watts
Continuous: 9500 watts
EFI Model
Peak: 12,000 watts
Continuous: 10,500 watts
Dimensions
H: 28 in.
(711 mm)
H: 32.75 in.
(832 mm) to
top of exhaust
W: 20 in.
(508 mm)
D: 40.5 in.
(1029 mm)
Net
Weight
485 lb.
(220 kg)
495 lb.
(225 kg)
501 lb.
(227 kg)
55
ENGINE DRIVEN
Trailblazer ® 302 and 275 DC (Gas or LP)
Heavy Industrial
Trailblazer 275 DC
is DC only.
See Literature No. ED/4.77
Processes
High output, unbeatable arc performance, and the independent weld and generator system make
these engine drives perfect for construction, fabrication, and maintenance/repair operations.
Stick (SMAW)
• ACMIG/DC(GMAW)
• Flux-Cored (FCAW)
• AC /DC TIG (GTAW)
• Air Carbon Arc Cutting and Gouging
• (CAC-A) (rated 3/16-in. carbons,
1
2
2
3
Superior arc performance
Four preset DIG settings (Stick)
Adaptive Hot Start™ (Stick)
Excellent MIG/FCAW arc performance
Lift-Arc™ TIG with Auto-Crater ™ and Auto-Stop™
•
•
•
•
EXCLUSIVE! DC TIG arc end with Auto-Crater
need for a remote control
• Eliminates
shielding gas coverage
• Maintains
tungsten and workpiece contamination
• Eliminates
Eliminates
unwanted
arc strikes outside the weld area
•
™
See pages 42 and 43 for
wireless remote controls.
Trailblazer 302
gas model shown.
Electronic Fuel Injection (EFI) —
Recommended Option
watts of generator power
• 12,000
and more weld output
• Easy starts with no choke required
Reliable operation, even with infrequent use —
• less prone to fuel deterioration
efficiency — use up to 27 percent less fuel
• Fuel
emissions — 27 percent less CO and
• Fewer
33 percent lower HC+NOx levels
Accu-Rated™– not inflated generator power.
Our Accu-Rated peak power is usable for maximum
generator loads, including plasma cutters, wire welders
and motor starting. It also beats the competition’s
very short-duration peak or surge power. Accu-Rated
power delivers:
11,000 watts (12,000 with available EFI) of usable
peak power
Peak power delivered for a minimum of 30 seconds
•
•
Gasoline/LP
56
model only.
wire feeder.
models with Dynasty® 200 Series or
302 model with HF-251.
4 Two-piece TIG torch recommended.
2 With
3 Both
Gasoline/LP Engines
Gas — Kohler CH 730 or
Subaru EH 65: 23 HP at 3600 RPM
EFI Gas — Kohler ECH 730:
25 HP at 3600 RPM
LP — Kohler CH 730:
25 HP at 3600 RPM
V-twin-cylinder, four-cycle, overhead
valve, industrial, air-cooled
Note: Engines are warranted separately by
engine manufacturer.
Most Popular Accessories
SuitCase X-TREME 12VS
• Wire
Feeder #951 184 (pg 23)
30A Aluminum
• Spoolmatic
Spool Gun / WC-24 Control
®
®
#130 831 / #137 549 (pg 26)
®
•
•
•
•
™
Super-tough protective armor with covers has
high-impact resistance in all temperatures and is
chemical-resistant. Other applications include:
automotive bumpers, tractor hoods and panels,
lawn mower decks, large structural parts, etc.
•
•
•
•
•
•
•
•
•
•
875 #907 390-01-1 (pg 71)
Adapter Cord, Full KVA #300 517
(pg 82)
Single-Phase Full KVA Plug Kit
#119 172 (pg 82)
Remote Oil Drain/Filter Kits (pg 83)
Hose and LP Tank Mounting
Assembly #195 329 (pg 83)
All-Purpose Running Gear
for Gas/LP models (pg 83)
#300 396 with Inner Tubes
#300 477 with Never Flat™ tires
Protective Cage with Cable
Holders (pg 83)
Protective Covers (pg 83)
HWY-1000 Trailer #195 013 (pg 84)
HF-251D-1 #042 388 (pg 87)
Engine Tune Up Kits are available
from your Miller parts distributor.
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Welding
Mode
Process
Amp/Volt Ranges
Rated Weld Output
at 25 V at 104° F (40° C)
Single-Phase Generator
Power at 104° F (40° C)
(#907 214) Kohler
(#907 215) Subaru
(#907 451) EFI Kohler
(#907 214-02-2) LP Kohler with GFCI
(order #195 329 Hose and LP Tank
Mounting Assembly separately)**
CC/DC
Stick/TIG
10 – 275 A
275 A at 100% Duty Cycle
CV/DC
MIG/FCAW
13 – 33 V, 10 – 275 A
275 A at 100% Duty Cycle
Peak: 11,000 watts
Continuous: 9500 watts
EFI Model
Peak: 12,000 watts
Continuous: 10,500 watts
(#907 216) Kohler
(#907 217) Subaru
(#907 452) EFI Kohler
(#907 216-02-2) LP Kohler with GFCI
(order #195 329 Hose and LP Tank
Mounting Assembly separately)**
CC/AC
Stick/TIG
10 – 225 A
200 A at 60% Duty Cycle
CC/DC
Stick/TIG
10 – 300 A
280 A at 100% Duty Cycle
CV/DC
MIG/FCAW
13 – 35 V, 10 – 325 A
300 A at 100% Duty Cycle
Stock Number*
Trailblazer
275 DC
™
®
Notes: Jobsites may require GFCI protection. See gas engine drive comparison chart on page 53.
*Additional models are available — visit MillerWelds.com or your distributor. See page 60 for Trailblazer 302 diesel model. **Liquid Withdrawal LP System.
Trailblazer
302
capable 1/4-in. carbons)
1 302
200 Series (pg 38)
• Dynasty
Spectrum
• 625 X-TREMEPlasma#907Cutters
404 (pg 70)
Self-calibrating digital weld meters with
maintenance displays
Preset and actual weld amperage/voltage
Fuel gauge
Hour meter function and oil change interval
Engine RPMs
Independent weld and generator. Trailblazer Series
has the only truly independent weld and generator
system — meaning no interaction between tools and the
welding arc, and it has the strongest generator power
while welding.
Model
4
Dimensions
H: 28 in.
(711 mm)
H: 33 in.
(838 mm) to
top of exhaust
W: 20 in.
(508 mm)
D: 45.5 in.
(1156 mm)
Net
Weight
568 lb.
(258 kg)
ENGINE
DRIVEN
Typical Equipment Power Usage
Bobcats and Trailblazers will
easily start and run typical
household and contractor tools,
as well as welding and farm
equipment.
Starting Watts
Running Watts
Farm
Equipment
Barn Cleaner (5 HP)
Silo Unloader (5 HP)
Portable Conveyor (1/2 HP)
Milker (5 HP)
11,600
12,200
3400
10,500
3000
4300
1000
2800
Contractor
Tools
Hand Drill (1/2 inch)
Circular Saw (8-1/4 inch)
Air Compressor (1-1/2 HP)
Flood Lights (Vapor)
600
1400
8200
1250
600
1400
2200
1000
Household
Refrigerator/Freezer
Sump Pump
2200
1300
700
800
Welding/
Cutting
Equipment
Millermatic® 212 Auto-Set™
(230 V MIG Welder)
Spectrum® 625 X-TREME ™
(30 A, 230 V, 1/2-in. cut)
6500
6500
6900
6900
The Green Revolution Starts by Owning Blue
Thanks to breakthrough work with our engine suppliers, Miller is the exclusive provider of
gas welder/generators with EFI technology.
Savings Advantage Comparison Chart
Carburetor Model
Model
Fuel use
—
12–27% less
Weekly fuel cost
(25 gal./week; $3.00 gas)
$75
$54.75 (a $20 savings —
$20 x 50 weeks = $1,000/yr!)
HC+NO2 emissions
—
33% lower
CO emissions
—
27% lower
Run time: 1/8-in. 7018
17 hours
20 hours
Run time: welding at
140 A and 40% duty cycle
14.5 hours
17 hours
Run time: 2400 watts
12 hours
(120 V, 20 A) continuous load
15.2 hours
Total output at 3600 RPM
23 HP
Accu-Rated™ power (same
for Bobcat and Trailblazer)
11,000 W peak power 12,000 W peak power
9,500 W continuous
10,500 W continuous
25 HP
SAVE UP TO $1,000 PER YEAR!
EFI — Electronic Fuel Injection. It’s standard
technology on most cars. EFI optimizes the air/fuel
ratio for all engine speeds and all engine loads.
It’s what enables V6 engines to deliver small block
V8 performance while getting better mileage.
Compared to carburetor models, Bobcats and
Trailblazers with EFI gas engines deliver a
Win-Win performance:
Up to 27 percent better fuel economy.
Up to 27 percent longer run times for less
refueling.
Reduced emissions because EFI engines use
less fuel.
No choke required. EFI means easy starting in all
climates, at all altitudes and no carburetor icing.
Check out the Bobcat and Trailblazer EFI models
on pages 54 – 56.
Here’s how Bobcat™ and Trailblazer® welder/generators
with optional EFI engines can save you money,
help the planet and improve job site performance.
Scan this tag to hear
from an EFI customer.
57
ENGINE DRIVEN
Trailblazer ® 302 Air Pak
Heavy Industrial
™
See Literature No. ED/4.78
Powerful all-in-one tool is designed for repair and construction with unbeatable multiprocess weld
quality, integrated rotary screw air compressor, 13,000 watts of generator power for jobsite tools,
and battery charge/jump start.
Processes
Stick (SMAW)
• AC/DC
(GMAW)
• MIG
(FCAW)
• Flux-Cored
AC
/DC
TIG
• Air Carbon Arc(GTAW)
and Gouging
• (CAC-A) (rated Cutting
3/16-in. carbons,
1
1
2
•
3
capable 1/4-in. carbons using
integrated air compressor)
Battery Charger/Jump Start
1 With
wire feeder.
Dynasty® 200 Series or
HF-251 (non-critical).
3 Two-piece TIG torch recommended.
2 With
Gasoline Engine
Kohler CH 750: 30 HP at 3600 RPM
V-twin-cylinder, four-cycle, overhead
valve, industrial, air-cooled
Note: Engine is warranted separately
by engine manufacturer.
Air Compressor
See pages 42 and 43 for
wireless remote controls.
Now with Higher Air Output!
Battery charge/jump start
For 12- and 24-volt batteries
Adjustable 10 to 75 amps of charge current
Up to 450 amps of jump start amperage
Optional air cooler with separator. Removes
moisture, fully integrated. For tools, blasters,
plasma cutting, and gouging. Effective when
temperatures are above freezing and easily
bypassed when below freezing.
Size and weight advantage. By adding just 14 inches of length to
a Trailblazer, the Air Pak occupies up to 50 percent less truck bed
space and up to 25 percent less axle weight compared to using a
separate engine-driven air compressor.
Cutting and gouging advantage. Ample generator power for
plasma cutters and weld power for Carbon Arc gouging, plus
integrated air compressor delivers air for both.
EXCLUSIVE! Capable of running air tools at idle. Reduce noise
and fuel consumption by running impacts, decking punches, and
many other types of air tools at idle speed.
Industry-leading 13,000 watts of peak power is voltage regulated
and independent of weld settings. 11,000 watts of continuous power.
•
•
•
Most Popular Accessories
Rotary screw air compressor
IMPROVED! Delivers up to 31 CFM and
160 PSI of air with no storage tank
Runs many tools at idle speed
Gives 100 percent deliverable air
Compressor is warranted by Miller for
three years
Air outputs rated at an industry high
104 degrees Fahrenheit (40° C)
Front panel air pressure adjustment
(80 to 160 PSI)
Screw compressor is designed for
more than 30,000 hours of operation
Automatic overpressure shutdown
with indication
SuitCase X-TREME 12VS
• Wire
Feeder #951 184 (pg 23)
30A Aluminum
• Spoolmatic
Spool Gun / WC-24 Control
®
•
•
•
•
•
•
•
•
™
®
•
•
•
•
Weld Power
#130 831 / #137 549 (pg 26)
Dynasty® 200 Series (pg 38)
Spectrum® Plasma Cutters
625 X-TREME™ #907 531 (pg 70)
875 #907 390-01-1 (pg 71)
Adapter Cord, Full KVA #300 517
(pg 82)
Remote Oil Drain/Filter Kits (pg 83)
Cage with Cable Holders
• Protective
#300 473 (pg 83)
Cover #300 379 (pg 83)
• Protective
• Air Cooler with Separator #300 420
Generator Power
Battery Charge/Jump Cables
• 25-ft.
with Plug #300 422
Tune Up Kits are available
• Engine
from your Miller parts distributor.
Independent weld and generator.
Trailblazer Series has the only truly
independent weld and generator system —
meaning no interaction between tools and
the welding arc, and it has the strongest
generator power while welding.
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Gasoline
*Additional models are available — visit MillerWelds.com or your distributor. **Battery charge/jump cables (#300 422) must be ordered separately.
Stock Number*
(#907 549**) Kohler with GFCI and Electric Fuel Pump
(#907 549-001**) Kohler
(#907 549-002**) Kohler with Cooler/Separator
Air
Compressor
By Miller
58
Welding
Mode
Process
Amp/Volt
Ranges
Rated Weld Output
at 32 V at 104°F (40°C)
Single-Phase Generator
Power at 104° F (40° C)
CC/DC
Stick/TIG
10 – 300 A
280 A at 100% Duty Cycle
CV/DC
MIG/FCAW
13 – 35 V,
350 A
300 A at 100% Duty Cycle
350 A at 60% Duty Cycle
Peak: 13,000 watts
Continuous: 11,000 watts
CC/AC
TIG/Stick
10 – 225 A
225 A at 60% Duty Cycle
Net
Weight
Dimensions
H:
H:
W:
D:
28 in. (711 mm)
34.5 in. (876 mm) to top of exhaust
20 in. (508 mm)
59.625 in. (1514 mm)
771 lb.
(350 kg)
Features
Free Air Delivery
at 3600 RPM
Free Air Delivery
at 3000 RPM
Free Air Delivery
at 2400 RPM (Idle)
Working Pressure
Constant
Duty
Cycle
Oil
Capacity
Rotary screw with electric clutch for on/off. Oil change intervals 500 hours.
Life expectancy 30,000 hours.
31 CFM
(0.88 m3/min.)
28 CFM
(0.79 m3/min.)
22 CFM
(0.62 m3/min.)
80–160 PSIG
100%
1.75 qt.
(1.7 L)
ENGINE
DRIVEN
For Every Truck,
There’s a Solution from
the Industry Leader
Product Applications
Whether your mobile repair work demands welding,
generator power, air, or some other multifunctional need,
Miller has a solution.
Learn more at MillerWelds.com/Worktrucks
Work Truck Accessories
Technical Drawings
Front Mount
Chassis Mount
Choose the Right Diesel Engine Drive
Miller provides an expansive
choice of diesel welder/
generators. These choices are
made available because no
two jobs are the same. See at
right how to select the correct
diesel engine drive that’s
right for your application.
High-Speed Diesel Advantages
Low-Speed Diesel Advantages
Bobcat ™ and Trailblazer® Diesels (page 60)
Big Blue® Series (pages 61–65)
Lower product costs
Smaller size
- Fits through small doors and on
jobsite elevators
- Fits on smaller trucks
Lightweight
- Easier to transport around the jobsite
Lower engine speeds
- Longer engine life at slower speeds
Quieter
- Some jobsites regulate noise level
Longer maintenance intervals
Higher weld outputs
59
ENGINE DRIVEN
Bobcat 250 Diesel
Industrial
™
Hvy Industrial
See Literature No. ED/4.34
Rugged engine drive is great for Stick and Flux-Cored welding and is designed for
maintenance/repair operations, construction, farm/ranch, and generator use.
Processes
Stick (SMAW)
• AC/DC
(GMAW) • Flux-Cored (FCAW)
• MIG
/DC TIG (GTAW)
• ACAir Carbon
Arc Cutting and Gouging
• (CAC-A) (rated
3/16-in. carbons,
1
1
2
Versatile AC and DC Stick/TIG plus Wire capabilities provide quality
welds on all types of metals. DC is smooth and easy to run while AC
Stick is used when arc blow occurs.
Note: AC TIG requires Dynasty 200 Series or HF-251 (non-critical).
Tri-Cor ™ technology is a redesigned stabilizer with added iron core for
smoother weld output, improved performance and decreased spatter with
7018 electrodes. All without sacrificing the excellent performance with
6010 electrodes.
Accu-Rated™ 11,000 watts of usable peak power is delivered for a
minimum of 30 seconds. Accu-Rated means peak power is usable for
maximum generator loads such as plasma cutting, Millermatic® MIG
welders and motor starting. Accu-Rated peak power beats the
competition’s very short-duration peak or surge power. Use your peak
power, it’s more than a number.
Idle lock switch allows engine to be started at idle to extend engine life.
Diesel
voltage-sensing feeder only.
Dynasty® 200 Series or
HF-251 (non-critical).
2 With
Diesel Engine
EPA Tier 4 Compliant! Kubota D722:
19 HP at 3600 RPM
Three-cylinder, industrial, liquid-cooled
Note: Engine is warranted separately
by engine manufacturer.
Most Popular Accessories
200 Series (pg 38)
• Dynasty
Plasma Cutters
• Spectrum
375 X-TREME #907 339 (pg 70)
®
®
™
•
•
•
625 X-TREME™ #907 404 (pg 70)
Protective Cage #300 052 (pg 83)
Protective Cover (pg 83)
HWY-1000 Trailer #195 013 (pg 84)
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
*Additional models are available — visit MillerWelds.com or your distributor.
Stock Number*
(#907 547)
Kubota with GFCI
(#907 547-001)
Kubota
capable 1/4-in. carbons)
1 With
Welding Mode
Process
Amp/Volt Ranges
Rated Output at 104° F (40° C)
Single-Phase Generator Power at 104° F (40° C)
Dimensions
Net Weight
CC/AC
CC/DC
Stick/TIG
40 –100 A
60 –140 A
80 – 200 A
100 – 275 A
250 A at 25 V, 100% Duty Cycle
275 A at 25 V, 60% Duty Cycle
Peak: 11,000 watts
Continuous: 9500 watts
700 lb.
(318 kg)
CV/DC
MIG/FCAW
17 – 22 V
20 – 28 V
250 A at 28 V, 100% Duty Cycle
275 A at 25 V, 60% Duty Cycle
H: 30 in. (762 mm)
H: 34.25 in. (870 mm)
to top of exhaust
W: 20 in. (508 mm)
D: 52 in. (1321 mm)
Trailblazer ® 302 Diesel
Heavy Industrial
See Literature No. ED/4.77
High output, unbeatable arc performance, and the independent weld and generator system make
this engine drive perfect for construction, fabrication, and maintenance/repair operations.
Independent weld and generator. Trailblazer Series has the only truly
independent weld and generator system — meaning no interaction
between tools and the welding arc, and it has the strongest generator
power while welding.
Stick (SMAW)
• AC/DC
MIG
(GMAW)
• AC /DC TIG (GTAW)
• Flux-Cored (FCAW)
• Air Carbon Arc Cutting and Gouging
• (CAC-A) (rated 3/16-in. carbons,
1
2
1
3
capable 1/4-in. carbons)
1 With
2 With
wire feeder.
Dynasty® 200 Series or with HF-251.
TIG torch recommended.
3 Two-piece
Diesel Engine
Superior arc performance
Four preset DIG settings (Stick)
Adaptive Hot Start™ (Stick)
Excellent MIG/FCAW arc performance
Lift-Arc™ TIG with Auto-Crater ™ and Auto-Stop™
EPA Tier 4 Compliant! Kubota D722:
19 HP at 3600 RPM
Three-cylinder, industrial, liquid-cooled
Accu-Rated™ 11,000 watts of usable peak power cranks out enough
power for most applications: job site, farm/ranch, or home. 9500 watts
of continuous power.
200 Series (pg 38)
• Dynasty
Spectrum
• 625 X-TREMEPlasma#907Cutters
404 (pg 70)
Automatic start at idle idles engine immediately when started to extend
engine life and reduce fuel use and noise.
•
•
•
•
•
•
•
See pages 42 and 43 for
wireless remote controls.
Processes
Note: Engine is warranted separately
by engine manufacturer.
Most Popular Accessories
®
®
™
875 #907 390-01-1 (pg 71)
Protective Cage #300 052 (pg 83)
Protective Cover (pg 83)
HWY-1000 Trailer #195 013 (pg 84)
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Diesel
*Additional models are available — visit MillerWelds.com or your distributor.
60
Stock Number*
(#907 548)
Kubota with GFCI
(#907 548-001)
Kubota
Welding Mode
Process
Amp/Volt Ranges
Rated Output at 104°F (40°C)
Single-Phase Generator Power at 104°F (40°C)
Dimensions
Net Weight
CC/AC
TIG/Stick
10 – 225 A
200 A at 25 V, 60% Duty Cycle
CC/DC
Stick/TIG
10 – 300 A
280 A at 25 V, 100% Duty Cycle
Peak: 11,000 watts
Continuous: 9500 watts
720 lb.
(327 kg)
CV/DC
MIG/FCAW
13 – 35 V,
10 – 325 A
300 A at 25 V, 100% Duty Cycle
H: 30 in. (762 mm)
H: 34.25 in. (870 mm)
to top of exhaust
W: 20 in. (508 mm)
D: 52 in. (1321 mm)
ENGINE
Big Blue 300 Pro
®
DRIVEN
Heavy Industrial
See Literature No. ED/5.21
Processes
Reliable low-speed diesel with outstanding arc performance.
Ideal for construction, fabrication or process piping professionals.
Meter maintenance displays
Fuel gauge
Hour meter function
Oil change interval
High coolant temperature and low oil pressure shutdowns
Low fuel shutdown — engine shuts down before system runs
out of fuel making restarts easy
The Vault — ultimate control board
reliability. Housed in a sealed
vault, sealed connections are made
through watertight plugs that make
these components impenetrable to
dust and moisture.
Tailored arc control (DIG) allows arc characteristics to be
changed for specific applications and electrodes. Smooth
running 7018 or stiffer, more penetrating 6010.
Improved arc starts and arc stability for excellent performance
in all applications.
Easy to use. Simple controls make it easy to set-up and weld.
Quiet. Only 72.2 db (97 Lwa) at maximum output. Improves
jobsite communication and safety.
Compact design fits sideways in a standard pickup.
Optional stainless steel package available.
CSA, IEC and NEMA compliant.
•
•
•
•
•
Legendary Big Blue
Reliability with
Professional Quality Arc!
See pages 42 and 43 for
wireless remote controls.
Wireless Antenna Kit
(#300 749) recommended.
Diesel
*Additional models are available —
visit MillerWelds.com or your distributor.
Stock Number*
(#907 144) CAT
(#907 144-02-1) CAT with Stainless Steel/120 V Block Heater
(#907 521) Kubota with 120 V Block Heater
(#907 472) Mitsubishi
(#907 472-001) Mitsubishi with 120 V Block Heater
Welding
Mode
Amp/Volt
Ranges
Rated Output at
104° F (40° C)
Single-Phase Generator Power at
104° F (40° C)
CC/DC
20 – 410 A
300 A at 32 V,
60% Duty Cycle
Peak: 12,000 watts
Continuous: 10,000 watts
CV/DC
14 – 40 V
(SMAW)
• Stick
(GMAW)
• MIG
(FCAW)
• Flux-Cored
TIG
(GTAW)
• Air Carbon Arc Cutting and Gouging
• (CAC-A) (rated 3/16-in. carbons,
capable 1/4-in. carbons)
Diesel Engines
EPA Tier 4i Compliant Choices!
CAT C1.5: 21.7 HP at 1850 RPM
Three-cylinder, industrial, liquid-cooled
Kubota V1505: 20.2 HP at 1850 RPM
Four-cylinder, industrial, liquid-cooled
Mitsubishi S4L2: 24.4 HP at 1850 RPM
Four-cylinder, industrial, liquid-cooled
Note: Engines are warranted separately
by engine manufacturer.
Most Popular Accessories
X-TREME 12VS (pg 23)
• SuitCase
12RC (pg 24)
• SuitCase
Dynasty
200
(pg 38)
• Wireless RemoteSeries
Control/
• Wireless AntennaHand
Kit
®
®
®
™
#300 430/#300 749 (pg 43)
875 (pg 71)
• Spectrum
Adapter
Cord,
• (pg 82) Full KVA #300 517
Full KVA Plug Kit
• Single-Phase
#119 172 (pg 82)
Cover #195 301 (pg 82)
• Protective
Trailer #043 805 (pg 84)
• HWY-224
• PRHC-14 Remote #195 511 (pg 86)
®
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Dimensions
Net Weight
H: 32 in. (813 mm)
W: 26.25 in. (667 mm)
D: 56 in. (1422 mm)
Caterpillar
1100 lb. (499 kg)
Kubota
1040 lb. (472 kg)
Mitsubishi
1083 lb. (491 kg)
Get the Latest News from Miller!
Whether you weld for your Profession or are the Do-It-Yourself kind,
we’ve got a market-specific PRO and DIY eNewsletter for you.
Delivered every six weeks, PRO and DIY feature topics selected for
the professional or do-it-yourself welder.
Sign up for one or sign up
for both and start receiving
product updates, success
stories, how-to and technical
advice, project ideas and
other welding information
tailored to fit your world.
Scan this tag to
sign up for our
email newsletter.
Sign up now at MillerWelds.com/newsletters
61
ENGINE DRIVEN
Big Blue® 350 PipePro® System
Heavy Industrial
Processes
(SMAW)
• Stick
(GMAW)
• MIG
(FCAW)
• Flux-Cored
(GTAW)
• TIGAir Carbon
Arc Cutting and Gouging
• (CAC-A) (rated
1/4-in. carbons)
Designed exclusively for transmission pipeline work, the system offers a complete welding
solution. With Stick welding capabilities — as well as MIG/FCAW welding capabilities to meet
high-strength steel requirements — it is ideal for the most demanding pipeline jobs.
Miller Big Blue 350 PipePro (Lit. No. ED/5.4)
Easy arc starts and better arc control provide
improved arc performance to produce more
consistent welds.
Enhanced MIG/FCAW arc control for best in
class performance.
Quieter — 40 percent less noise improves jobsite
communication and safety.
The Vault — ultimate control board reliability.
A sealed aluminum case protects the circuit
board from dust, dirt, moisture and heat.
12,000 watts of peak single-phase auxiliary
power runs multiple jobsite tools.
Compact size and weight optimizes truck space.
20 percent greater fuel efficiency.
Tier 4i Compliant — meets tough EPA emission
requirements.
Auto Remote Sense™ (ARS) — eliminates
confusion of a remote/panel switch.
LINE-X® cover is tough to provide superior impact,
corrosion and abrasion protection.
Optional stainless steel package available.
CSA, IEC and NEMA compliant.
•
•
•
•
•
•
•
•
•
•
•
•
Please see MillerWelds.com/pipepro for more
complete information and product spec sheets.
•
•
•
•
•
•
•
•
•
•
Fabshield® 79T8/79T8Ni2
Self-shielded flux-cored tubular wires specifically designed
for transmission pipeline applications.
Fast-freezing, easy-to-remove slag decreases time spent
clearing weld beads.
All-position welding, excellent vertical-down performance,
reduces fatigue and weld cycle time.
Four 10-pound vacuum-packed spools per jobsite-friendly
bucket, 1080 pounds per pallet.
Ideal for multipass welding on deep-groove pipe weld
butt joints.
79T8 typical applications are on X70 grade pipe and below.
79T8Ni2 typical applications are on X80 grade pipe.
Diesel
•
PipePro Dura-Flux™
Features a lightweight, rotatable Hi-Viz™ neck that matches
the SuitCase X-TREME HD DS performance, resulting in
optimal arc characteristics.
Power cable with internal trigger leads provides better
weld-joint access.
Replaceable liner makes maintenance simple.
Comfortable handle with dual schedule switch optimizes
wire feed speed and reduces user fatigue.
Model/Stock Number
Big Blue 350 PipePro Engine Drive only
(#907 478) CAT Turbo
(#907 478-001) CAT Turbo w/Stainless Steel
(#907 428) Mitsubishi
(#907 428-001) Mitsubishi w/Stainless Steel
Model/Stock Number
SuitCase X-TREME 8HD DS Feeder only
(#300 594-003)
62
Miller SuitCase® X-TREME ™ 8HD DS
Voltage-sensing, heavy-duty wire feeder features
numerous performance-driven benefits.
High-torque motor can handle large or small
diameter flux-cored wires with ease.
Improved motor control allows for incredible
precision and arc control.
Dual schedule operation when connected to
PipePro Dura-Flux gun, fixed 12 percent reduction
in wire feed in Schedule B.
•
•
•
•
Miller Wireless Remote Hand Control (page 43)
Completely cordless design increases project
productivity, saves money and improves
operator safety.
Extends remote welding control range to 300 feet
for jobsite mobility.
Eliminates costly cord failures.
Improves weld quality with precise operator control.
Belt clip keeps the remote secure and accessible.
Wireless Antenna Kit #300 749 recommended.
•
•
•
•
•
•
Rated Output at 104° F (40° C)
Single-Phase Generator
Power at 104° F (40° C)
20–400 A
400 A at 26 V, 40% Duty Cycle
350 A at 24 V, 100% Duty Cycle
Peak: 12,000 watts
Continuous: 10,000 watts
Stick
20–400 A
350 A at 34 V, 60% Duty Cycle
325 A at 33 V, 100% Duty Cycle
MIG
14–40 V
350 A at 31.5 V, 100% Duty Cycle
Welding
Mode
Process
Amp/Volt
Ranges
CC/DC
TIG
CV/DC
Input Power
Operates on
open-circuit voltage
and arc voltage:
14–48 VDC,
110 Max. OCV
Input Welding
Circuit Rating
330 A at 60%
Duty Cycle
Wire Feed Speed
Low Range 25–200 IPM
(0.65–5.2 m/min.)
High Range 175–780 IPM
(4.5–19.8 m/min.)
dependent on arc voltage
Diesel Engine
EPA Tier 4i Compliant!
CAT C1.5T: 24.5 HP at 1850 RPM
Turbo-charged three-cylinder, industrial,
liquid-cooled
Mitsubishi S4L2: 24.4 HP at 1850 RPM
Four-cylinder, industrial, liquid-cooled
Note: Engine is warranted separately
by engine manufacturer.
Big Blue 350 PipePro System
Consists Of (ordered separately)
Blue 350 PipePro engine drive
• Big
(see chart below for stock numbers)
X-TREME 8HD DS
• SuitCase
wire feeder #300 594-003
Remote Hand Control and
• Wireless
14-pin receiver #300 430
Antenna Kit #300 749
• Wireless
PipePro Dura-Flux
• Bernard
gun with 15-ft. (4.5 m) cable
•
with 1/16-in. liner #7010072
with 5/64-in. liner #7010082
Hobart Brothers Fabshield
1/16 in. 79T8
#S228519-V32
1/16 in. 79T8Ni2 #S228819-V32
5/64 in. 79T8
#S228525-V32
5/64 in. 79T8Ni2 #S228825-V32
Most Popular Accessories
Big Blue 350 PipePro
Single-Phase Full KVA Plug Kit
#119 172 (pg 82)
Engine Filter Kit #244 711
(includes air, oil and fuel filters)
SuitCase X-TREME 8HD DS Feeder
V-Knurled Drive Rolls
1/16 in. (1.6 mm)
#079 609
5/64 in. (2.0 mm)
#079 610
PipePro Dura-Flux Gun
Quik Tip™ Contact Tips
1/16 in. (1.6 mm)
#T1116
5/64 in. (2.0 mm)
#T1564
Hi-Viz ™ Quik Tip™ Insulator #7010062
Neck (70° x R2 in.) #7010068
Neck Liner
1/16 in. #QJL-116
5/64 in. #QJL-564
Cable Liner
1/16 in. #44215
5/64 in. #44315
•
•
•
•
•
•
•
•
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Dimensions
Net Weight
H: 32 in. (813 mm)
W: 26.25 in. (667 mm)
D: 56 in. (1422 mm)
Caterpillar
1037 lb. (470 kg)
Wire Type and
Diameter Capacity
Maximum Spool
Size Capacity
Solid Wire .023–.062 in.
(0.6–1.6 mm)
Flux-Cored .030–.078 in.
(0.8–2.0 mm)
8 in. (203 mm),
14 lb. (6.4 kg)
Mitsubishi
1018 lb. (462 kg)
Dimensions
H: 12.75 in. (324 mm)
W: 7.25 in. (184 mm)
D: 18 in. (457 mm)
Net
Weight
30 lb.
(14 kg)
ENGINE
DRIVEN
Big Blue 400 and 500 CC or CC/CV
®
See Literature No. ED/10.8
Designed for fleet owners, construction contractors and rental companies who want a powerful
diesel welder/generator and place a premium on rugged reliability with proven performance.
Meter maintenance displays
Fuel gauge
Hour meter function
Oil change interval
High coolant temperature, low oil
pressure and low fuel shutdowns
CC/CV models have the vault for
control board reliability (see page 61
for details).
Designed and built with reliable,
heavy-duty industrial components
to allow operation in remote locations.
•
•
•
•
Big Blue 500
CC/CV Deluxe
model shown.
Diesel
Note: All models come standard with Engine Gauges.
*Additional models are available — visit MillerWelds.com or your distributor.
**Adds Auto Idle, Weld Meters and Optional Generator Power.
Hot Start™ makes it easy to start all
types of Stick electrodes.
Arc-Drive™ enhances Stick welding,
especially on pipe, by focusing
arc and preventing electrode from
going out.
5500-watt peak AC power
independent of weld settings means
no interaction between tools and the
welding arc.
Quick and easy maintenance
with single-side access to oil level
check, oil fill, oil filter, fuel filter and
air cleaner.
CSA, IEC and NEMA compliant.
Processes
(SMAW) • MIG (GMAW)*
• Stick
(FCAW)* • TIG (GTAW)
• Flux-Cored
Carbon Arc Cutting and Gouging
• Air(CAC-A)
•
(Big Blue 400: rated 5/16-in.
carbons, capable 3/8-in. carbons)
(Big Blue 500: rated 3/8-in. carbons)
Stud
*CC/CV models only.
Diesel Engines
EPA Tier 4i Compliant Choices!
400 — Deutz D2011L03i:
32 HP at 1800 RPM
Three-cylinder, industrial, air/oil-cooled
400 — Perkins 404D-22:
32.6 HP at 1800 RPM
Four-cylinder, industrial, liquid-cooled
500 — Deutz D2011L04i:
48.6 HP at 1800 RPM
Four-cylinder, industrial, air/oil-cooled
Note: Engines are warranted separately
by engine manufacturer.
Visit MillerWelds.com or your distributor
for Miller® options and accessories.
Model
Stock Number*
Process
Amp/Volt
Ranges
Rated Output
at 104° F (40° C)
Single-Phase Generator Power at 104° F (40° C)
Dimensions
Net Weight
Big Blue 400 CC
(#907 173) Deutz
(#907 175) Perkins
DC Stick/TIG
55 – 500 A
Big Blue 400 CC/CV
Deluxe Model
(#907 327)** Deutz
(#907 329)** Perkins
DC Stick/TIG/
MIG/FCAW
15 – 500 A
14 – 40 V
400 A at 36 V
(14.4 kW),
100% Duty Cycle
Peak: 5500 watts, Continuous: 4000 watts
Additional Generator Power for
Deluxe Model (While NOT Welding)
3-Phase: 15,000 watts or 1-Phase: 12,000 watts
Deutz
1655 lb. (751 kg)
Perkins
1545 lb. (701 kg)
Big Blue 500 CC
(#907 181) Deutz
DC Stick/TIG
55 – 600 A
Big Blue 500 CC/CV
Deluxe Model
(#907 331)** Deutz
DC Stick/TIG/
MIG/FCAW
20 – 600 A
14 – 40 V
500 A at 40 V
(20 kW),
100% Duty Cycle
Peak: 5500 watts, Continuous: 4000 watts
Additional Generator Power for
Deluxe Model (While NOT Welding)
3-Phase: 20,000 watts or 1-Phase: 12,000 watts
H: 43 in.
(1092 mm)
W: 28.5 in.
(724 mm)
D: 65.125 in.
(1654 mm)
Big Blue 400 Eco Pro
®
See Literature No. ED/5.3
Superior arc and efficient
operation in a compact package
Saves fuel — designed to be up to
25 percent more efficient than
competitive models
Runs quieter — in economy mode,
71.5 dB at 23 feet (7 m) is quieter
than most competitive models
Easier to transport — up to
44 percent smaller and 41 percent
lighter than other models
Compact design fits sideways in a
standard pickup
Exceptional arc control in Stick,
TIG or MIG process
•
•
•
•
•
See pages 42 and 43 for
wireless remote controls.
Wireless Antenna Kit
(#300 749) recommended.
Stock Number
(#907 426) Mitsubishi
(#907 426-001)
Mitsubishi with
Weld Meters and
120 V Block Heater
Deutz
1695 lb. (769 kg)
Heavy Industrial
Rugged, compact, fuel-efficient diesel welder/generator that is Eco-friendly and Eco-nomical.
Diesel
Heavy Industrial
Dual-speed technology
High engine power is available
when needed for high amp
applications up to 500 amps
Low-speed operation (1850 RPM)
provides power for all welding
applications up to 350 amps,
keeping the engine quiet and more
fuel efficient. Provides optimal
performance in a small package
Ultimate reliability
Proven solid-state control
technology is fully enclosed,
protected and sealed by the Vault
The Vault’s sealed connections
make these components
impenetrable to dust and moisture
•
•
•
•
Processes
Stick (SMAW) • MIG (GMAW)
• Flux-Cored
• Air Carbon (FCAW)
• TIG (GTAW)
Arc Cutting and Gouging
• (CAC-A) (5/16-in.
carbons)
Diesel Engine
EPA Tier 4i Compliant!
Mitsubishi S4L2: 35 HP at 3000 RPM
Four-cylinder, industrial, liquid-cooled
Note: Engine is warranted separately
by engine manufacturer.
Most Popular Accessories
SuitCase X-TREME 8VS/12VS
• (pg
23)
Remote Hand Control/
• Wireless
Wireless Antenna Kit
®
™
#300 430/#300 749 (pg 43)
375 X-TREME /
• Spectrum
625 X-TREME (pg 71)
Cover #195 301 (pg 82)
• Protective
Trailer #043 805 (pg 84)
• HWY-224
• PRHC-14 Remote #195 511 (pg 86)
®
™
™
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Welding Mode
Process
Amp/Volt Ranges
Rated Output at 104° F (40° C)
Single-Phase Generator Power at 104° F (40° C)
Dimensions
Net Weight
CC/DC
Stick/TIG
20 – 450 A
300 A at 32 V, 100% Duty Cycle
450 A at 30 V, 40% Duty Cycle
Peak: 5500 watts, Continuous: 4000 watts
1095 lb.
(497 kg)
CAC-A
40 – 500 A
400 A at 36 V, 100% Duty Cycle
500 A at 30 V, 40% Duty Cycle
MIG/FCAW
14 – 40 V
300 A at 28 V, 100% Duty Cycle
450 A at 30 V, 40% Duty Cycle
H: 32 in.
(813 mm)
W: 26.25 in.
(667 mm)
D: 56 in.
(1422 mm)
CV/DC
63
ENGINE DRIVEN
Big Blue® 450 Duo CST
Heavy Industrial
™
See Literature No. ED/5.5
Durable dual-operator welder/generator, delivers proven CST 280 Stick/TIG performance maximizing
productivity and efficiency. Two separate outputs powered by one low-speed diesel engine delivers
280 amps of output per operator. Fuel efficient and quiet operation makes it ideal for any jobsite.
Two superior arcs in one compact package.
Save fuel, reduce maintenance costs and increase productivity.
Simple-to-operate process selector knob automatically sets proper
DIG setting on E6010 and E7018 electrodes providing superior
Stick performance.
Lift-Arc™ start for TIG starts without the use of high frequency.
Remote amperage control permits the use of standard and wireless
amperage control devices.
Quiet operation. At just 72.2 dB at 23 feet (7 m) it’s quieter than
most single-operator models, improving jobsite communication
and safety.
Low-speed Mitsubishi diesel engine.
Diesel
See pages 42 and 43 for wireless
remote controls. Wireless Antenna Kit
(#300 749) recommended.
Stock Number
(#907 477)
Mitsubishi
Welding
Mode/Process
CC/DC
(Stick/TIG)
Output Mode
Amperage Range
Rated Output at 122° F (50° C)
Separate (Dual Outputs)
5 – 280 A
200 A at 28 VDC, 100% Duty Cycle
Combined: (Paralleled)
10 – 450 A
400 A at 28 VDC, 100% Duty Cycle
Big Blue 700 Duo Pro
See pages 42 and 43 for wireless
remote controls. Wireless Antenna Kit
(#300 749) recommended.
Diesel
CC/DC
(Stick/TIG)
CV/DC
(MIG/FCAW)
64
capable 1/4-in. carbons)
Diesel Engine
EPA Tier 4i Compliant!
Mitsubishi S4L2: 24.4 HP at 1850 RPM
Four-cylinder, industrial, liquid-cooled
Note: Engine is warranted separately
by engine manufacturer.
Most Popular Accessories
SuitCase X-TREME 8VS/12VS
• (pg
23)
Remote Hand Control/
• Wireless
Wireless Antenna Kit
®
™
#300 430/#300 749 (pg 43)
875 (pg 71)
• Spectrum
Adapter
Cord,
• (pg 82) Full KVA #300 517
Full KVA Plug Kit
• Single-Phase
#119 172 (pg 82)
Cover #195 301 (pg 82)
• Protective
• HWY-224 Trailer #043 805 (pg 84)
®
Single-Phase Generator
Power at 122° F (50° C)
Dimensions
Peak: 12,000 watts,
Continuous: 10,000 watts
120/240 VAC, 60 Hz
H: 32 in. (813 mm)
W: 26.25 in. (667 mm)
D: 56 in. (1422 mm)
See Literature No. ED/5.6
Two independent pipe quality arcs in one compact package.
Two independent generators provide up to 32,000 watts of power.
Multiprocess CC/CV capability provides independent operator
controls and the best Stick, MIG, Flux-Cored and TIG performance
available with no interaction.
Easy arc starts and better arc control for best in class performance.
Independent remote control connections allow the use of standard
and wireless volt/amperage control devices for each operator.
Quiet operation. At just 68 dB at idle or 76 dB at 23 feet (7 m) at
full load, it’s quieter than many single-operator models, improving
jobsite communication and safety.
Big Blue® 350 PipePro® System compatible.
Smaller, lighter, quieter, and smoother running than competitive
models with comparable output.
Standard features include oil pan heater, intake manifold heater,
output paralleling switch and automatic idle.
Output Mode
Amp/Volt
Ranges
Separate (Dual Outputs)
Net
Weight
1064 lb.
(483 kg)
Heavy Industrial
A complete multiprocess and multioperator welder/generator in one rugged package.
Up to 400 amps of output per operator can be paralleled with a single switch to provide up
to 800 amps of power.
Welding
Mode/Process
(SMAW) • TIG (GTAW)
• Stick
Carbon Arc Cutting and Gouging
• Air(CAC-A)
(rated 3/16-in. carbons,
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
®
Stock Number
(#907 461)
Deutz
Processes
Processes
(SMAW) • MIG (GMAW)
• Stick
(FCAW) • TIG (GTAW)
• Flux-Cored
Air
Carbon
Arc Cutting and Gouging
• (CAC-A) (rated
3/8-in. carbons)
Diesel Engine
EPA Tier 4i Compliant!
Deutz D2011L04i: 48.6 HP at 1800 RPM
Four-cylinder, industrial, air/oil-cooled
Note: Engine is warranted separately
by engine manufacturer.
Most Popular Accessories
SuitCase X-TREME 8VS/12VS
• (pg
23)
Remote Hand Control/
• Wireless
Wireless Antenna Kit
®
™
#300 430/#300 749 (pg 43)
875 (pg 71)
• Spectrum
Cord, Full KVA #300 517
• Adapter
(pg 82)
KVA Plug Kit (pg 82)
• Full
Single-Phase #119 172
®
Three-Phase
#254 140
Cover #194 683 (pg 82)
• Protective
• HWY-224 Trailer #043 805 (pg 84)
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Rated Output at 104° F (40° C)
Generator Power at 104° F (40° C)
Dimensions
20 – 400 A
300 A at 32 VDC, 100% Duty Cycle
400 A at 36 VDC, 40% Duty Cycle
Combined: (Paralleled)
40 – 800 A
500 A at 40 VDC, 100% Duty Cycle
700 A at 28 VDC, 60% Duty Cycle
H: 43 in. (1092 mm)
W: 28.5 in. (724 mm)
D: 65.125 in. (1654 mm)
Separate (Dual Outputs)
14 – 40 V
300 A at 29 VDC, 100% Duty Cycle
400 A at 34 VDC, 40% Duty Cycle
Single-Phase: 5500 watts peak/
4000 watts continuous
Additional Generator Power
Three-Phase: 27,000 watts peak/
20,000 watts continuous or
Single-Phase: 19,000 watts peak/
12,000 watts continuous
Combined: (Paralleled)
14 – 40 V
500 A at 39 VDC, 100% Duty Cycle
700 A at 28 VDC, 60% Duty Cycle
Net
Weight
1729 lb.
(784 kg)
ENGINE
Big Blue Air Pak
®
™
DRIVEN
Heavy Industrial
See Literature No. ED/10.5
Processes
Stick (SMAW)
• ACMIG/DC(GMAW)
• Flux-Cored (FCAW)
• AC /DC TIG (GTAW)
• Air Carbon Arc Cutting and Gouging
• (CAC-A) (rated 1/2-in. carbons)
• Stud
• Battery Charger/Jump Start
1
Designed for heavy construction or maintenance and repair contractors, this all-in-one
multiprocess welder/generator/compressor and optional AC weld/battery charge/jump-start
package sets the standard for power and performance.
Meter maintenance displays
Fuel gauge
Hour meter function
Oil change interval
High coolant temperature, low oil
pressure and low fuel shutdowns
•
•
•
•
Ingersoll-Rand ultra-reliable
industrial rotary screw air
compressor. Belt-driven with
automatic belt tensioner.
2
Turbocharged engine provides
superior performance in high altitudes.
1
1 Deluxe
model only.
model with HF-251, or all models
with Dynasty® 200 Series.
Quiet. Only 70 dB (95 Lwa) at idle and
79 dB (104 Lwa) at maximum output.
2 Deluxe
Diesel Engine
Hot Start™ makes it easy to start all
types of Stick electrodes.
EPA Tier 4i Compliant!
Deutz TD2011L04:
63.4 HP at 1850 RPM
Turbocharged, four-cylinder, industrial,
liquid-cooled
Arc-Drive™ enhances Stick welding,
especially on pipe, by focusing arc and
preventing electrode from going out.
Note: Engine is warranted separately
by engine manufacturer.
Optional battery charge/jump start
Independent compressor controls
include an on/off switch for applications for 12 and 24 volt batteries.
Note: Option includes AC weld.
not requiring compressed air.
CSA, IEC and NEMA compliant.
Deluxe model
shown without the
Vandalism Lockout Kit.
Most Popular Accessories
• Desiccant
Air Dry
System
#195 117
Eliminates moisture in the air stream
and prevents air line freeze-ups in
cold climates.
Diesel
* Comes complete with Engine Gauges, Auto Idle and 12 Volt Intake Manifold Heater.
** Cold Weather Model — Comes complete with Engine Gauges, Auto Idle, Weld Meters, Battery Lockout/Tagout Disconnect Switch,
12 Volt Intake Manifold Heater and 120 Volt Oil Pan Heater.
***Deluxe Model — Comes complete with Engine Gauges, Auto Idle, Weld Meters, Battery Lockout/Tagout Disconnect Switch, 12 Volt Intake Manifold Heater,
120 Volt Oil Pan Heater, Vandalism Lockout Kit, AC/DC/Battery Charge/Jump-Start Switch and Optional Generator Power.
Stock Number
(#907 062)*
Deutz
(#907 062-04-1)**
Deutz, Cold Weather Model
(#907 062-07-1)***
Deutz, Deluxe Model
Welding Mode
Amp/Volt
Ranges
Weld Output Rated at 104° F (40° C)
NEMA Amperage and Voltage
Single-Phase Generator
Power at 104° F (40° C)
CC/DC
20 –750 A
600 A at 44 V (26.4 kW), 40% Duty Cycle
550 A at 42 V (23.1 kW), 60% Duty Cycle
500 A at 40 V (20 kW), 100% Duty Cycle
CV/DC
14 – 40 V
500 A at 40 V (20 kW), 100% Duty Cycle
CC/AC (Deluxe Model Only)
20 – 575 A
400 A at 36 V (14.4 kW), 100% Duty Cycle
Battery Charge/Jump Start
(Deluxe Model Only)
12/24 V
750 A, 12 V, Jump-Start
750 A, 24 V, Jump-Start
Peak: 5500 watts
Continuous: 4000 watts
Additional Generator
Power for Deluxe Model
(While NOT Welding)
Three-Phase: 20,000 watts or
Single-Phase: 12,000 watts
Dimensions
Net Weight
H: 43 in.
(1092 mm)
W: 28.5 in.
(724 mm)
D: 69.5 in.
(1765 mm)
Base and
Cold Weather
Models
1931 lb. (876 kg)
Deluxe Model
1956 lb. (887 kg)
Air Compressor
Features
Free Air Delivery
at 1850 RPM
Free Air Delivery
at 1235 RPM (Idle)
Working Pressure
Constant
Duty
Cycle
Oil
Capacity
Automatic Compressor
Shutdowns
Ingersoll-Rand
CE55 G1
Rotary screw with electric clutch for on/off. Oil change intervals
500 hours (same as engine). Life expectancy 30,000 hours.
60 CFM
(1.70 m3/min.)
40 CFM
(1.13 m3/min.)
100 PSIG
7 bar
100%
5 qt.
(4.7 L)
Oil Temperature
Big Blue® Turbo
Heavy Industrial
See Literature No. ED/10.3
Processes
Similar to the Big Blue Air Pak, but without the air compressor.
Meter maintenance displays
Fuel gauge
Hour meter function
Oil change interval
High coolant temperature, low oil
pressure and low fuel shutdowns
Turbocharged engine provides
superior performance in high altitudes.
Highest output rating available on
an engine-driven welder: 20 to 750
amp range, 600 amps at 100 percent
duty cycle!
•
•
•
•
Diesel
Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Stock Number
(#907 157)
Deutz
Quiet. Only 70 dB (95 Lwa) at idle and
79 dB (104 Lwa) at maximum output.
Hot Start™ makes it easy to start all
types of Stick electrodes.
Arc-Drive™ enhances Stick welding,
especially on pipe, by focusing arc and
preventing electrode from going out.
5500-watt peak AC power
independent of weld settings means
no interaction between tools and the
welding arc.
CSA, IEC and NEMA compliant.
(SMAW)
• Stick
(GMAW)
• MIG
(FCAW)
• Flux-Cored
(GTAW)
• TIGAir Carbon
Arc Cutting and Gouging
• (CAC-A) (rated
1/2-in. carbons,
capable 5/8-in. carbons)
• Stud
Diesel Engine
EPA Tier 4i Compliant!
Deutz TD2011L04:
63.4 HP at 1850 RPM
Turbocharged, four-cylinder, industrial,
liquid-cooled
Note: Engine is warranted separately
by engine manufacturer.
Visit MillerWelds.com or your distributor
for Miller® options and accessories.
Welding Mode
Process
Amp/Volt Ranges
Rated Output at 104° F (40° C)
Single-Phase Generator Power at 104° F (40° C)
Dimensions
Net Weight
CC/DC
Stick/TIG
20 –750 A
CV/DC
MIG/FCAW
14 – 40 V
600 A at 44 V (26.4 kW),
100% Duty Cycle
Peak: 5500 watts
Continuous: 4000 watts
H: 43 in. (1092 mm)
W: 28.5 in. (724 mm)
D: 69.5 in. (1765 mm)
1755 lb.
(796 kg)
65