Lockable Thermostat Guard

Technical Instructions
Document No. 155-723
November 21, 2002
Lockable Thermostat Guard
TH0719R1
POWERS
Description
Features
Specifications
A two-piece, plastic shield designed to prevent unauthorized adjustment or physical
damage to a wall-mounted thermostat. A lockset secures the guard to the wall plate.
•
Two styles of wall plates are included to accommodate new installations or
retrofit jobs.
•
Clear, 1/8-inch thick, plastic surface provides unrestricted viewing of thermostat
settings.
•
Lock and two keys.
•
Ventilated louvers on all four sides allow accurate temperature sensing.
Guard cover
Mounting plates
Retrofit installation
New installation
Dimensions
Weight
Application
1/8-inch, clear plastic
Clear plastic
Desert beige plastic
10 × 6-1/4 × 3-3/4 inches
(254 × 158.75 × 95.25 mm)
1.25 lbs (0.57 kg)
The Lockable Thermostat Guard provides protection from physical damage and
unauthorized adjustment of settings. The lockset makes this unit truly vandal-proof. This
guard will protect any Siemens Building Technologies electric or pneumatic wallmounted thermostat.
The mounting plate designed for new installations has a small, back entry hole to
accommodate electrical wires or pneumatic tubing connected to the thermostat. The
retrofit mounting plate is a large frame with four mounting screw holes to allow
installation over any existing Siemens thermostat.
Product Number
141-570
Siemens Building Technologies, Inc.
Technical Instructions
Document No. 155-723
November 21, 2002
Mounting
Lockable Thermostat Guard Kit
This guard can be used with all types of wall surfaces including plaster, brick, tile,
cement block, and drywall. It can be mounted either vertically or horizontally.
Required Tools
Installation
•
Medium, flat-blade screwdriver (all installations)
•
Drill and 3/16-inch drill bit (new installations only)
For new installations (desert beige mounting plate – Item 6):
•
Mount plate before installing thermostat.
•
When installing to a 2" × 4" wall box:
– Punch or drill out mounting holes in the plate at the proper locations.
– Use two No. 6-32 × 1-inch long screws for mounting (Item 5).
•
When installing directly to drywall, use four No. 6-18 self-tapping screws
(Item 2).
For retrofit installations (clear plastic mounting ring – Item 3), use four No. 6-18 selftapping screws (Item 2).
6
2
4
3
2
1
TH0720R1
5
Figure 1. Installing the Lockable Thermostat Guard.
Table 1. Lockable Thermostat Guard Components.
Item
Description
Quantity
Material
1
Cover
1
Plastic
2
No. 6-18 × 1-1/4 inch self-tapping screws
4
Steel
3
Mounting Plate, clear (retrofit installation)
1
Plastic
4
Thermostat (not included)
1
—
5
No. 6-32 × 1-inch screw
2
Steel
6
Mounting Plate, desert beige (new installation)
1
Plastic
Keys
2
—
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners.
© 2002 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Your feedback is important to us. If you have
comments about this document, please send
them to technical.editor@sbt.siemens.com
Document No. 155-723
Printed in the U.S.A.
Page 2
Download PDF