MODEL 1466F
™
USER GUIDE
POWERBRUSH PREMIER
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING YOUR DEEP CLEANER.
When using an electrical appliance, basic precautions should be
observed, including the following.
WARNING
ALWAYS CONNECT TO A PROPERLY EARTHED
ELECTRICAL SOCKET.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY:
»Unplug from electrical socket when not
in use and before servicing.
»This appliance can be used by children
aged from 8 years and above and persons with reduced physical, sensory and
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved. Cleaning and
user maintenance shall not be made by
children without supervision.
»Children should be supervised to ensure
that they do not play with the appliance.
»If the supply cable is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
»Do not leave appliance when plugged in.
»Do not modify earthed plug.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK – USE INDOORS ONLY. DO NOT IMMERSE.
USE ONLY ON SURFACES MOISTENED BY THE
CLEANING PROCESS. USE ONLY BISSELL
CLEANING PRODUCTS INTENDED FOR USE WITH
THIS MACHINE.
»Use indoors only.
»Do not allow to be used as a toy.
»Use only as described in the user guide.
»Use only manufacturer’s recommended attachments.
»Do not use with damaged cable or plug.
»Do not immerse in water or liquid.
»If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water; do not attempt to operate it and have it
repaired at an authorized service center.
»Liquid must not be directed towards
equipment containing electrical components.
»Do not pull or carry by cable, use cable as a handle,
close door on cable, or pull cable around sharp edges
or corners.
»Do not run appliance over cable.
»Keep cable away from heated surfaces.
»Do not unplug by pulling on cable.
»To unplug, grasp the plug, not the cable.
»Do not handle plug or appliance with wet hands.
»Do not put any object into openings.
»Do not use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce air flow.
»Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts.
»Turn off all controls before unplugging.
»Use extra care when cleaning on stairs.
»Do not use to pick up flammable or combustible
liquids, such as petrol, or use in areas where they
may be present.
»Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.)
»Do not use appliance in an enclosed space filled
with vapors given off by oil base paint, some
mothproofing substances, flammable dust, or other
explosive or toxic vapors.
»Do not pick up hard or sharp objects such as glass,
nails, screws, coins, etc.
»Keep appliance on a level surface.
»Do not carry appliance while in use.
»Unplug before attaching the TurboBrush™ tool.
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK,
ALWAYS INSTALL FLOAT BEFORE ANY WET
PICK-UP OPERATION.
FOR OPERATION ON A 220-240 VOLT A.C. 50/60 HZ POWER SUPPLY ONLY.
This model is for household use only.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
2
www.BISSELL.com
Thanks for buying a BISSELL deep cleaner
We’re glad you purchased a BISSELL
deep cleaner. Everything we know
about floor care went into the design
and construction of this complete,
high-tech home cleaning system.
Your BISSELL deep cleaner is well
made, and we back it with a limited
two-year guarantee. We also stand
behind it with a knowledgeable,
dedicated Consumer Care
department, so, should you ever
have a problem, you’ll receive fast,
considerate assistance.
My great-grandfather invented
the floor sweeper in 1876. Today,
BISSELL is a global leader in the
design, manufacture, and service
of high quality homecare products
like your BISSELL deep cleaner.
Thanks again, from all of us
at BISSELL.
Mark J. Bissell
Chairman & CEO
Safety Instructions . . . . . . . . . . 2
Product View . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . 5
Operations . . . . . . . . . . . . . . . . 6-9
Maintenance & Care . . . . . . 10-12
Troubleshooting . . . . . . . . . . . . 13
Replacement Parts . . . . . . . . . . 14
Accessories . . . . . . . . . . . . . . . . . 15
Guarantee . . . . . . . . . . . . . . . . . . 16
Consumer Care . . . . . . . . . . . . . 16
Tips
» Deep cleaning stairs and
high-traffic areas on a
regular basis helps prolong
carpet life.
» Deep cleaning carpeting
regularly can reduce dust
and allergens in your home.
WARNING
AN ACTION OR ATTENTION IS NEEDED TO THIS AREA IN ORDER
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, OR INJURY
GUIDE
READ USER GUIDE FOR COMPLETE SAFETY AND USER
INSTRUCTIONS
WEEE
DO NOT THROW THE APPLIANCE AWAY WITH THE NORMAL
HOUSHOLD WASTE AT THE END OF ITS LIFE, BUT HAND IT IN AT
AN OFFICIAL COLLECTION POINT FOR RECYCLING. BY DOING
THIS YOU WILL HELP TO PRESERVE THE ENVIRONMENT.
www.BISSELL.com
3
Product View
1
2
11
3
12
4
13
5
6
7
14
15
8
16
10
17
18
9
1 Spray Trigger
2Cleaning Tool
(tools vary by model)
3 Upper Handle
4 Power Cord
5Deep Reach™ Tough Stain Tool
6 Carry Handle
4
www.BISSELL.com
7 Ready Tools™ Dial
8 Removable Nozzle
9 EdgeSweep™ Brushes
10Belt Access Door
(underside of machine)
11 Cord Clip
12 Quick Release™ Cord Wrap
13Hose
14 Tank Carry Handle
15 Tank Latch
16 2-in-1 Water Tank
17 Power Pedal
18 Recline Pedal
Assembly
WARNING
Do not plug in your deep cleaner until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
Your deep cleaner comes in four easy-toassemble components:
Upper Handle with Screws
Lower Base
Upper Hose/Cord Rack
Lower Hose/Cord Rack
1.
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1. Slide upper handle onto lower base and secure
with two long screws into marked holes (screws
will be taped to upper handle).
2. Attach upper hose/cord rack to back of
the handle by guiding hook up into the slot
location and pressing firmly upward until it
is seated flush with back of machine. Secure
1 short screw through hole in the bottom of
upper hose/cord rack.
3. Attach lower hose/cord rack by guiding the
hook up into slot location and pressing firmly
upward until it is seated flush with back of
machine. Secure 2 short screws through holes
on sides of the bottom hose/cord rack.
2.
3.
4.
4. Wrap hose around lower and upper hose/cord
racks and secure it by inserting trigger on hose
grip into opening on hose grip holder located on
upper hose/cord rack.
NOTE: Make sure to wrap hose beginning
from back of bottom hose/cord rack and
then wrapping over and around top of upper
hose/cord rack.
5. Wrap cord around lower and upper hose/cord
racks and secure plug to cord with clip on plug.
6. Attach cleaning tools as necessary to storage locations on the front upper handle, bottom
hose/cord wrap and end of hose grip.
Deep cleaner assembly is now complete.
Cleaning fluid
Keep plenty of genuine BISSELL 2X formula on
hand so you can clean and protect whenever it
fits your schedule. Always use genuine BISSELL
deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and
will void the guarantee.
24oz. 2X Wash
& Protect PRO
Professional
Stain & Odour
Formula w/
Scotchgard™ Protector
#78H6E
24oz. 2X Wash &
Protect PET Pet Stain
& Odour Formula
w/ Scotchgard™
Protector
#99K5E
24oz. 2X Wash
& Protect Stain
& Odour Formula
w/ Scotchgard™
Protector
#62E5E
24oz. 2X Wash &
Refresh Blossom &
Breeze Fragrance
Formula w/
Febreze® Freshness
#1248E
WARNING
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids
intended for use with the deep cleaner.
24oz. 2X Wash &
Refresh Cotton
Fresh Formula w/
Febreze® Freshness
#1249E
24oz. 2X Wash
& Refresh Natural
Orange Formula
#83P3E
16 oz. 2X Wash
& Shine Hard
Floor Solutions
#56L9E
22oz.
Stain
Pretreat
#1147E
www.BISSELL.com
5
Operations
Special features
Heatwave Technology™
This deep cleaner features Heatwave Technology
that helps to maintain the temperature of the
hand hot tap water you put in it to provide
constant heat as you clean. The Heatwave
Technology automatically turns on when you
turn the machine on.
Scotchgard™ Protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep
cleaning. To help restore this important
protection, only BISSELL offers deep cleaning
formulas with Scotchgard protector. This offers
extra protection against dirt and tough stains
to keep your carpets looking good longer.
Microban® antibacterial
product protection
Microban antibacterial product protection is
built into key components to help prevent
the growth of harmful common household
bacteria. It helps to keep the unit fresher and
cleaner between uses.
Before you clean
1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning an
entire room (optional).
3. Vacuum area with a dry vacuum cleaner
before deep cleaning.
WARNING
To reduce the risk of fire, use only BISSELL deep cleaning
formula for full size machines in your deep cleaner. Use of
cleaning formulas that contain lemon or pine oil may damage this appliance and void the guarantee. Chemical spot
cleaners or solvent-based soil removers should not be used.
These products may react with the plastic materials used in
your deep cleaner causing cracking or pitting.
4. Plan your cleaning route to leave an exit path.
It is best to begin cleaning in the corner farthest
from your exit.
5. Pretreating (optional)
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high
traffic areas such as entry ways and hallways.
6
To pretreat:
a. Using BISSELL Stain Pretreat (sold
separately), generously spray evenly over
soiled area, do not overwet.
b. Wait 3-5 minutes before deep cleaning.
. Clean as normal using your BISSELL
c
deep cleaner, following instructions in
this guide.
www.BISSELL.com
7
8
9
6
5
4
1
2
3
5a.
Operations
Filling the 2-in-1 water tank
1. Remove tank from base of machine by lifting
tank carry handle. Carry like a bucket to the sink.
2. Pull upward on bottom edge of latch in the
back of tank to unhook and remove lid.
3. Pull up on bladder fill cover that says
“Fill Here”. Fill the bladder with hand hot
(60°C/140°F MAX) tap water. Do not boil or
microwave water as it can destroy the bladder.
4. Using measuring cup provided, fill to indicated
fill line on measuring cup (2.5 oz/74 ml) and
pour in to bladder.
WARNING
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids
intended for use with the deep cleaner. Non-BISSELL
cleaning solutions may harm the machine and void
the guarantee.
2.
1.
5.
3.
NOTE: Always use genuine BISSELL 2X
formulas to maximize cleaning and for the
safety of your machine.
5. Replace tank lid by seating front edge of tank
before back, then lock latch in place.
NOTE: Remember to secure lid and test to
make sure it is secure before picking up tank.
6.
6. Place tank into machine base, seating
firmly in place.
Carpet cleaning
1. Plug into a proper outlet. Set ReadyTools dial
to Floor Cleaning setting. Turn power ON by
pressing power button
on pedal on back of
machine with your foot. Turn power OFF
by
pressing power button on pedal again.
2. With your foot, press gray recline pedal located
on back of machine next to red power pedal.
3. While pressing spray trigger, make one slow
forward wet pass and another back. Caution:
do not overwet.
4. Release spray trigger and make one slow
forward and backward pass over same area.
Power Pedal
Recline Pedal
CAUTION
5. Repeat cleaning passes until solution being
suctioned up appears clean. Continue passes
without pressing spray trigger until you can’t
see any more water being suctioned up.
Repeated passes will help aid in dry time.
Take care not to run over loose objects or edges of
area rugs. Stalling the brush may result in premature
belt failure.
NOTE: You may notice hair and debris deposits
on the carpet or in the tank that were loosened
by the cleaning action. This debris should be
picked up and thrown away.
ATTENTION
Some Berber carpets have a tendency to fuzz with wear.
Repeated strokes in the same area with an ordinary
vacuum or deep cleaner may aggravate this condition.
www.BISSELL.com
7
Operations
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Empty the 2-in-1 water tank/
clean removable nozzle
1. Press power pedal
off. Remove 2-in-1 water
tank from base using tank carry handle. Carry
tank like a bucket to a utility sink or outside
where you will dispose of dirty water.
1.
3.
2. Pull upward on bottom edge of latch in the
back of tank to unhook and remove lid.
3. Empty dirty water from back corner of tank.
4. After each use, remove any debris trapped
in red lint screen on base of machine while tank
is still removed.
4.
Lint Screen
5.
5. After each use, remove nozzle by grasping
each side of top of nozzle and pulling forward.
Clean nozzle by rinsing under running water.
6. When finished, replace nozzle by slightly
raising front of machine to line up slots on
each side of the base with hooks on each side
of nozzle. Attach at base first and then push
forward to click nozzle into place.
6.
NOTE: If nozzle is not attached properly, loss
of suction will occur.
7. To continue carpet cleaning, refer back to
“Carpet cleaning” instructions on page 7.
If cleaning is complete, refer to “Maintenance
and care” section starting on page 10.
IMPORTANT
Ready Tools™
Your deep cleaner comes equipped with a hose
and at least one cleaning tool for cleaning stairs,
upholstery, and more.
Check for colourfastness in an inconspicuous place. If
possible, check upholstery stuffing. Coloured stuffing
may bleed through fabric when it becomes wet.
Important! If using to clean upholstery, check upholstery tags.
bvh
g kvh
gh j j h
d b lg
fd hn l kl
sd jkn f h
Ad bj jh
b j
cv hh
gcg
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can use
your deep cleaner. If tag is coded with “X” or
“S” (with a diagonal strike through), or says
“Dry Clean Only,” do not proceed with any deep
cleaning machine. Do not use on velvet or silk.
If manufacturer’s tag is missing or not coded,
check with your furniture dealer.
2. To begin cleaning with attachments, follow
instructions on page 7 for filling 2-in-1 water tank.
3. Set ReadyTools dial to TOOLS setting. This
will allow spray and suction from hose.
4. Attach cleaning tool of your choice to end
of hose.
NOTE: If your deep cleaner came with a Deep
Reach Tough Stain Tool, do not follow the
cleaning tool instructions below. Instead,
follow the “Cleaning with Deep Reach Tough
Stain Tool” instructions in the next section.
8
www.BISSELL.com
Manufacturer’s tag
3.
Operation
5. Hold tool approximately 2.5 cm above soiled
surface. Press spray trigger to apply cleaning
solution to soiled area. Using brush on tool,
gently scrub area to be cleaned. Release spray
trigger, apply downward pressure on tool
and pull it toward you to suction up dirt and
cleaning solution. Continue until no more dirt
can be removed. Caution: Do Not Overwet.
6. When finished cleaning, remove and rinse
tool(s) in clean, running water.
7. It is recommended that you suction clean
water from the tap to rinse out the hose. Be
careful not to over-fill your tank.
7.
8.
8. Before wrapping hose onto rack, lift end
of hose and stretch out to ensure all water is
cleared from hose.
9. Wrap hose around rack.
10. Empty 2-in-1 water tank and rinse out,
following instructions on page 8.
11. If ReadyTools dial becomes difficult to turn, the
diverter assembly that holds dial may need to be
cleaned. To clean, first remove nozzle and locate
screw that holds diverter assembly in place. With a
Phillips screwdriver, remove the screw and set aside.
12. Remove diverter assembly; hold under
running water making sure water flows through
and around dial. Turn dial about 10 times
clockwise and 10 more times counter clockwise.
This should free up any debris.
11.
12.
13. Wipe diverter assembly with a soft cloth
and replace back on machine. Replace nozzle.
14. Return ReadyTools dial to FLOOR
CLEANING setting.
Cleaning with Deep Reach™ Tough Stain Tool (Select models only)
1. Set tool on soiled surfaces and press spray
trigger to spray solution onto soiled area to
be cleaned.
1.
2. Slowly move tool back and forth over soiled
surface, keeping tool in contact with carpet.
3. Release spray trigger and move tool slowly
over soiled area to suction up water and dirt.
3.
4. Continue to clean the area, working in small
sections, until no more dirt can be removed.
5. The front nozzle of the Deep Reach Tough
Stain Tool can be removed for easy cleaning.
Push the button at the top of the cleaning tool
and slide the front nozzle off the top of the
cleaning tool. Rinse the front nozzle and the tool
with clean water and replace front nozzle back
onto the tool.
5.
www.BISSELL.com
9
Maintenance & Care
Machine care
For best results, a few simple steps can assure
your machine is well maintained after cleaning
is complete.
1. Flush your machine of any remaining residual
solution.
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
a. Fill 2-in-1 water tank with clean hand hot
(60°C/140°F MAX) tap water.
b. Recline handle and press spray trigger
for 15 seconds while making forward and
backward passes on the carpet. Release
spray trigger and make forward and
backward passes for another 15 seconds or
until there is no more water being suctioned
up from carpet.
2. Press power pedal
wrap power cord.
off. Unplug machine and
3. After emptying 2-in-1 water tank, rinse it with
running hand hot (60°C/140°F MAX) tap water,
taking care to clean underneath and around
heavy duty bladder. Clean out red lint screen
prior to replacing tank. Removable nozzle may
be rinsed if necessary.
4. Replace 2-in-1 water tank on machine.
5. Any loose hair or debris can be pulled from
brush roll and thrown away. See page 11 for
instructions on removing brush roll.
6. Clean the ReadyTools dial assembly area by
following instructions in Step 11 and 12 on page 9.
7. To clean attachments, remove from hose and
rinse under clean, running water. Dry before
storing. Clean hose by suctioning clean water
from tap (taking care not to let tank overflow).
Before wrapping back on machine, lift end
of hose and stretch out to ensure all water is
cleared from hose. Refer to page 9, illustrations
7 and 8.
8. Wipe machine’s exterior with a soft cloth.
9. After carpet is dry, you may wish to vacuum
again to remove any leftover hair and fuzz the
deep cleaner may have brought to the carpet
surface.
10
www.BISSELL.com
Tip
» Let all parts
dry completely
before storing
Maintenance & Care
Machine storage
Put unit away in a closet or basement for next
use. Store cleaner in a protected, dry area. Since
this product uses water, it must not be stored
where there is a danger of freezing. Freezing will
damage internal components and void guarantee.
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Brush belt and brush removal & replacement
Occasional replacement of the brush belt or
brush may become necessary. If needed, please
follow instructions below.
1. Turn off machine and unplug it from outlet.
Wrap hose and cord on racks.
2. Remove 2-in-1 water tank and set aside.
3. IMPORTANT: Fully recline handle and turn
2
unit upside down.
2.
3.
4.
5.
4. Locate red belt access door and remove
two screws.
NOTE: The dark screw is a long machine screw
and will take approximately 25 full turns to
completely remove. The head of the screw will
4
lift from the belt access door so that it can be
easily removed.
5. Remove belt access door assembly from end
of brush and set aside.
6. Remove brush belt. If worn or damaged,
replace with new brush belt.
6.
6
7. If necessary, the brush roll can be removed for
cleaning or replacement. To remove, rotate the
brush out of brush housing and pull brush off
axle attached to remaining end cap. The
remaining pivot arm can be removed by taking
out the screw (this will allow for full access to
brush chamber for cleaning). Make sure “keyed”
end of metal rod is aligned with slot in pivot arm
before re-assembling. Replace brush on axle,
cogged-side last. You may need to rotate brush
to allow it to slide all the way down the axle.
8. Reattach brush belt by installing it onto
toothed pump pulley and then onto toothed
end of brush.
9. Reattach belt access door assembly
to end of brush and rotate back into place.
Replace screws.
NOTE: Do not over tighten screws.
If you have any questions or are having trouble
removing, replacing or reinstalling your brush belt
or brush, please call BISSELL Consumer Care.
www.BISSELL.com
11
Maintenance & Care
Pump belt removal & replacement
Occasional replacement of the pump belt may
become necessary. If needed, please follow
instructions below.
1. Turn off machine and unplug it from outlet.
Wrap hose and cord on racks.
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
2. Remove 2-in-1 water tanks and set aside.
3. IMPORTANT: Fully recline handle and turn
unit upside down.
2
2.
3.
4.
5.
6.
7.
8.
9.
4. Locate red belt access door and remove
two screws.
NOTE: The dark screw is a long machine screw
and will take approximately 25 full turns to
completely remove. The head of the screw will
lift from the belt access door so that it can be4
easily removed.
5. Remove belt access door assembly from end
of brush and set aside.
6. Remove brush belt from end of brush and
set aside. If worn or damaged, replace with new
6
brush belt.
7. Remove pump belt and replace it with a new
belt by pinching belt at one end to make a large
loop. Attach belt to silver motor shaft first and
then pull towards larger, red pulley. Attach belt
to red pulley.
8
NOTE: Spinning the red pulley a few times will
help center belt and ensure correct assembly.
8. Reattach brush belt by installing onto
toothed pump pulley and then onto toothed
end of brush.
9. Reattach belt access door assembly
to end of brush and rotate back into place.
Replace screws.
NOTE: Do not over tighten screws.
If you have any questions or are having trouble
removing, replacing or reinstalling your brush
belt, please call BISSELL Consumer Care.
12
www.BISSELL.com
Troubleshooting
Problem
Reduced
spray OR
no spray
DirtLifter
PowerBrush
does not turn
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Possible causes
Remedies
Bladder may be empty.
Press power pedal
off; refill
bladder with clean hand hot
(60°F/140°C MAX) tap water and
formula.
2-in-1 tank may not be seated
properly.
Press power pedal
off; remove
tank and reseat tank.
Pump may have lost prime.
Press power pedal
off; after 1 minute turn on and depress spray trigger.
Pump belt may be broken.
Press power pedal
off and unplug
from outlet. Follow belt replacement
instructions on pages 11 and 12.
Brush belt or pump belt is
off or broken.
Press power pedal
off and unplug
from outlet. Follow belt replacement
instructions on pages 11 and 12.
ReadyTools dial may be on wrong
setting for cleaning job.
Set ReadyTools dial to either floor
cleaning or tools.
Poor tool position. (Hand held
attachments only).
Adjust angle; apply more downward
pressure.
Removable nozzle may not be
properly attached.
Make sure nozzle is on correctly by
slightly raising front of machine to
line up slots on each side of base of
machine with hooks on each side of
nozzle. Attach at base first and then
click nozzle into place. Refer to image
6 on page 8.
Cleaner
not picking
up solution
2-in-1 tank lid is not properly installed. Re-install lid; refer to images on page 7.
2-in-1 tank is not properly seated.
2-in-1 tank must be firmly seated to
function; remove and reseat 2-in-1 tank.
2-in-1 tank has picked up
maximum dirty water.
Empty 2-in-1 tank and refill, refer to
the Operation section.
The lint screen may be clogged.
Clean out lint screen, refer to page 8.
Please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
www.BISSELL.com
13
Replacement Parts
These items are available for your BISSELL deep cleaner.
Visit www.BISSELL.com
PART #
PART NAME
PART #
PART NAME
160-3026
Tank Assembly Complete
160-3027
Tank Base
160-2858
Removable Nozzle
160-1543
Replacement Pump Belt (with
instructions)
160-1542
Replacement Brush Belt (with
instructions)
160-1526
Tank Top (with Handle)
160-1519
Upper Hose and Cord Rack
160-1520
Lower Hose and Cord Rack
160-1537
Brush Roll Assembly
with Pivot Arms
*Not all parts are included with every model.
14
www.BISSELL.com
Accessories
These items are available for your BISSELL deep cleaner.
Visit www.BISSELL.com
PART #
PART NAME
PART #
PART NAME
160-1523
Hard Floor Tool
203-6651
3" Tough Stain Tool
203-6653
4" Upholstery Tool
203-6654
6" Stair Tool
203-6652
Powered TurboBrush™ Tool
203-0116
Spraying, 2-in-1 Crevice Tool
w/ Brush
203-6655
Spraying Crevice Tool
203-7412
Deep Reach Tool
*Not all parts are included with every model.
Cleaning Formula: Refer to bottom of page 5 of this guide for a full selection of cleaning
formula available for purchase.
www.BISSELL.com
15
Consumer
Guarantee
This Guarantee only applies outside of the USA and Canada. It is provided
by BISSELL International Trading Company BV (“BISSELL”).
This Guarantee is provided by BISSELL. It gives you specific rights. It is
offered as an additional benefit to your rights under law. You also have
other rights under law which may vary from country to country. You can
find out about your legal rights and remedies by contacting your local
consumer advice service. Nothing in this Guarantee will replace or lessen
any of your legal rights or remedies. If you need additional instruction
regarding this Guarantee or have questions regarding what it may cover,
please contact BISSELL Consumer Care or contact your local distributor.
This Guarantee is given to the original purchaser of the product from new
and is not transferable. You must be able to evidence the date of purchase
in order to claim under this Guarantee.
Limited Two-Year Guarantee
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL will
for two years from the date of purchase by the original purchaser repair or
replace (with new or remanufactured components or products), at BISSELL’s
option, free of charge, any defective or malfunctioning part or product.
BISSELL recommends that the original packaging and evidence of the
date of purchase be kept for the duration of the Guarantee period in case
the need arises within the period to claim on the Guarantee. Keeping
the original packaging will assist with any necessary re-packaging and
transportation but is not a condition of the Guarantee.
If for your product is replaced by BISSELL under this Guarantee, the new
item will benefit from the remainder of the term of this Guarantee (calculated from the date of the original purchase). The period of this Guarantee
shall not be extended whether or not your product is repaired or replaced.
*EXCEPTIONS AND EXCLUSIONS FROM
THE TERMS OF THE GUARANTEE
This Guarantee applies to products used for personal domestic use and
not commercial or hire purposes. Consumable components such as filters,
belts and mop pads, which must be replaced or serviced by the user
from time to time, are not covered by this Guarantee.
This Guarantee does not apply to any defect arising from fair wear and tear.
Damage or malfunction caused by the user or any third party whether as a
result of accident, negligence, abuse, neglect, or any other use not in accordance with the User Guide is not covered by this Guarantee.
An unauthorised repair (or attempted repair) will void this Guarantee
whether or not damage has been caused by that repair/attempt.
Removing or tampering with the Product Rating Label on the product or
rendering it illegible will void this Guarantee.
SAVE AS SET OUT BELOW BISSELL AND ITS DISTRIBUTORS ARE NOT LIABLE
FOR ANY LOSS OR DAMAGE THAT IS NOT FORESEEABLE OR FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE
OF THIS PRODUCT INCLUDING WITHOUT LIMITATION LOSS OF PROFIT, LOSS
OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF OPPORTUNITY, DISTRESS,
INCONVENIENCE OR DISAPPOINTMENT. SAVE AS SET OUT BELOW BISSELL’S
LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
BISSELL DOES NOT EXCLUDE OR LIMIT IN ANY WAY ITS LIABILITY FOR (A) DEATH
OR PERSONAL INJURY CAUSED BY OUR NEGLIGENCE OR THE NEGLIGENCE OF
OUR EMPLOYEES, AGENTS OR SUBCONTRACTORS; (B) FRAUD OR FRAUDULENT
MISREPRESENTATION; (C) OR FOR ANY OTHER MATTER WHICH CANNOT BE
EXCLUDED OR LIMITED UNDER LAW.
FOR AUSTRALIAN CONSUMERS ONLY:
OUR GOODS COME WITH GUARANTEES THAT CANNOT BE EXCLUDED UNDER
THE AUSTRALIAN CONSUMER LAW. YOU ARE ENTITLED TO A REPLACEMENT
OR REFUND FOR A MAJOR FAILURE AND FOR COMPENSATION FOR ANY
OTHER REASONABLY FORESEEABLE LOSS OR DAMAGE. YOU ARE ALSO
ENTITLED TO HAVE THE GOODS REPAIRED OR REPLACED IF THE GOODS FAIL
TO BE OF ACCEPTABLE QUALITY AND THE FAILURE DOES NOT AMOUNT TO A
MAJOR FAILURE.
THIS GUARANTEE IS IN ADDITION TO OTHER RIGHTS OR REMEDIES UNDER
LAW. NOTHING IN THIS GUARANTEE EXCLUDES, LIMITS OR MODIFIES ANY
LIABILITY OF BISSELL WHICH IS IMPOSED BY LAW, OR LIMITS OR MODIFIES
ANY REMEDY AVAILABLE TO THE CONSUMER WHICH IS GRANTED BY LAW.
TO MAKE A CLAIM UNDER THIS GUARANTEE CONTACT BISSELL AUSTRALIA
PTY LTD (DETAILS ABOVE). CONTACT BISSELL PRIOR TO RETURNING ANY
GOODS. WHERE AGREED, BISSELL WILL REIMBUSE REASONABLE POSTAGE /
HANDLING COSTS (IF ANY) FOR RETURNING GOODS TO BISSELL.
Consumer Care
If your BISSELL product should require
service or to claim under our Limited
Two-Year Guarantee, please visit:
Website or E-mail:
www.BISSELL.com
For Australian inquiries:
Monday – Friday 9am - 5pm
BISSELL AUSTRALIA PTY LIMITED
42 Rocco Dr.
Scoresby 3179
Victoria
Australia
Telephone: 1-800-811-183
For New Zealand inquiries:
Monday – Friday 9 am — 5 pm
Parex Industries Ltd.
5 Tolich Place
Henderson 0610
Auckland
New Zealand
Telephone: 0800-247-735
Replacement parts and accessories are
available for purchase. To purchase visit
www.BISSELL.com
Visit the BISSELL website: www.BISSELL.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: _____________ Please record your Purchase Date: _____________
NOTE: Please keep your original sales receipt. It provides proof of the date of purchase in the event of a Guarantee claim. See Guarantee for details.
16
©2014 BISSELL Homecare, Inc
Ambi Pur is a trademark of The
Grand Rapids, Michigan
Proctor & Gamble Company,
All rights reserved. Printed in China
Cincinnati, Ohio used under
Part Number 160-4230 Rev 04/14
license by BISSELL Homecare, Inc.
Visit our website at: www.BISSELL.com
Scotchgard is a trademark of 3M
Microban® is a registered trademark of Microban Products Company
Download PDF