LED LCD HDTV - Hitachi Service U.S.A.

LED LCD HDTV
OWNER’S GUIDE
Model:
LE55A6R9
55” Class (54.64” Diag.)
Serial No.
CONGRATULATIONS
Thank you for purchasing this Hitachi product.
Please read these instructions carefully.
For additional assistance please call Toll Free
800.HITACHI (800.448.2244)
or visit our website at www.hitachi.us/tv.
Keep this Owner’s Guide for future reference.
Record the model name and serial number of your LCD
Television for future reference.This information is located
on the back of the television.
TABLE OF CONTENTS
2-7
8
9-17
18-32
33-36
37
38
40
41-43
IMPORTANT SAFETY INSTRUCTIONS
HOW TO ATTACH / REMOVE THE STAND
FIRST TIME USE
TV OPERATION
CONNECTIONS TO OTHER EQUIPMENT
RECEPTION DISTURBANCES
TROUBLESHOOTING
SPECIFICATIONS
LIMITED WARRANTY
OG_A6R9_03272015
CAUTION:TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS TELEVISION’S
AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference and (2)This device must accept any
interference received, including interference that may cause undesired operation.
For questions regarding this declaration, contact:
Hitachi America, Ltd.
2420 Fenton Street, Suite 200
Chula Vista, CA 91914-3556
Tel: 800.HITACHI (800.448.2244)
ATTN: Customer Relations
2
Location of the required Marking
The rating sheet, FCC ID and the safety caution are on the rear of the unit.
FCC ID also located
inside of Roku Ready®
Streaming Stick® cover.
LEAD NOTICE
This product contains lead. Dispose of this product in accordance with applicable
environmental laws. For product recycling and disposal information, contact your local
government agency or www.eRecycle.org (in California), the Electronic Industries Alliance
at www.ecyclingcentral.com (in the U.S.) or the Electronic Product Stewardship Canada at
www.epsc.ca (in Canada). FOR MORE INFORMATION, call 800.HITACHI (800.448.2244)
(USA/CANADA).
IMPORTANT SAFETY INSTRUCTIONS
1) 2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
3
IMPORTANT SAFETY INSTRUCTIONS
(continued)
15) Apparatus should not be exposed to dripping or splashing, and objects filled with
liquids, such as vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or
electric shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous
voltage points or short out parts that could result in fire or electric shock. Never spill or
spray any type of liquid into the unit.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
19) If an outside antenna or cable
NATIONAL ELECTRICAL CODE
system is connected to the unit,
ANTENNA
be sure the antenna or cable
LEAD IN WIRE
system is grounded to provide
some protection against voltage
GROUND
CLAMP
surges and built-up static
ANTENNA
DISCHARGE UNIT
charges, Section 810 of the
(NEC SECTION 810-20)
National Electrical Code, ANSI/
GROUNDING CONDUCTORS
ELECTRIC SERVICE
(NEC SECTION 810-21)
EQUIPMENT
NFPA 70, provides information
GROUND CLAMPS
with respect to proper grounding NEC-NATIONAL
POWER SERVICE GROUNDING
ELECTRICAL CODE
of the mast and supporting
ELECTRODE SYSTEM
S2898A
(NEC ART 250, PART H)
structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
20) When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or those that have the same
characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to
perform safety checks to determine that the unit is in proper operating condition.
22) When you connect the product to other equipment, turn off the power and unplug all of
the equipment from the wall outlet. Failure to do so may cause an electric shock and
serious personal injury. Read the owner's manual of the other equipment carefully and
follow the instructions when making any connections.
23) Do not allow the product to output distorted sound for an extended period of time. It
may cause speaker overheating and fire.
24) This reminder is provided to call the cable TV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
25) The mains plug is used as the disconnect and shall remain readily operable.
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool
surroundings into a warm room or if the temperature of the room rises suddenly. When
this happens, unit's performance will be impaired. To prevent this, let the unit stand in its
new surroundings for about an hour before switching it on, or make sure that the room
temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an
air conditioner. In such cases, change the location of the unit.
4
IMPORTANT SAFETY INSTRUCTIONS
(continued)
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and
injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the
panel. This may cause skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if
the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the
LCD Panel for long periods of time, the image can become permanently engrained in the
LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time
while it is displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style
(16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing
normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides
of screen).
The following symptoms are not signs of malfunction but technical limitation.
Therefore we disclaim any responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology,
however sometimes parts of the screen may be missing picture elements or have
luminous spots.
• Do not install the LCD Panel near electronic equipment that produces electromagnetic
waves. Some equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such
as infrared cordless headphones.
Power source
This television is designed to operate on 120 volts 60 Hz, AC current. Insert the power
cord into a 120 volts 60 Hz outlet.
To prevent electric shock, do not use the television’s (AC) plug with an extension cord,
receptacle, or other outlet unless the blades can be fully inserted to prevent blade
exposure.
Never connect the television to 50 Hz, direct current, or anything other than the specified
voltage.
Warning
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Caution
Never remove the back cover of the television as this can expose you to very high
voltages and other hazards. If the television does not operate properly, unplug the
television and call your authorized dealer or service center.
Adjust only those controls that are covered in the instructions, as improper changes or
modifications not expressly approved by Hitachi could void the user’s warranty.
5
CHILD SAFETY NOTICE
6
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this
may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place
in direct sunlight. When placing on a shelf leave 4 inches (10 cm) free space around the
entire unit.
4 inches
4 inches
Y(VIDEO)
Securing to a Wall
1 Use metallic
wire (not provided), screw and clamp on the rear of the TV as shown below.
4 inches
2 Keep the TV 4 inches away from the wall, except when mounted using the wall mount
bracket, and secure to the wall as shown below:
4 inches
4 inches
Wire
Y(VIDEO)
Screw
Clamp
Wire
4 inches
NOTICE FOR TV CABINET
If the unit is placed on a cabinet smaller than the length of the unit, it could result in instability
and the unit may tumble over, making a risk of personal, possibly fatal injury. Also, this would
seriously damage the product. Accordingly, Hitachi accepts no responsibility or liability for
any injuries or property damage resulting from the improper installation.
Y(VIDEO)
YES !!
NO !!
7
How to attach the stand
NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned
space to work at to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1 Carefully place the TV screen face-down on a clean, cushioned surface.
2 Insert and secure the stands (R and L) with 2 screws (supplied) (M8x16mm) each side
as shown in Figure 1.
R
Stands
L
R
Stands
Screws
L
Figure 1
• Be sure to follow the above instructions. Insufficient tightening or incorrect installation of
the stand will not support your TV correctly, and could result in damage or injury from tipover.
How to remove the stand / Wall mounting
When you transport this product, remove the stand and pack it flat against the back of the
unit in the carton. To remove the stand, perform the above steps in reverse order.
When you mount the TV on the wall, remove both stands (R and L). To disconnect the stand
remove the screws from the bottom of TV.
Top Wall Mount Hole
Bottom Wall Mount Hole
Screws
Wall mounting:
• Before wall mounting, please carefully check the location of the TV’s mounting-holes.
• If the unit is to be mounted on the wall, contact the retailer where you purchased the
TV for advice, and have the equipment professionally installed. Incomplete or improper
installation may cause injury to you, and/or damage to the TV. The screws ISO M6 thread
type should be used. The insertion length must be 21-30mm for Top Wall Mount Hole and
20-21mm for Bottom Wall Mount Hole. If the insertion length is less than or more than
specified above, the weight can not be maintained or a space is created between the Wall
Mount Bracket and the Television.
(Insertion Length) = (Screw Length) - (Washers Thickness) - (Mounting Bracket Thickness)
8
Contents
Before using your unit
IMPORTANT SAFETY INSTRUCTIONS����������������������������������������������������������������� 3
CHILD SAFETY NOTICE......................................................................................... 6
SAFETY PRECAUTIONS........................................................................................ 7
How to attach the stand........................................................................................... 8
How to remove the stand / Wall mounting��������������������������������������������������������������� 8
Contents.................................................................................................................. 9
Features................................................................................................................. 10
Location of controls................................................................................................ 11
Remote control...................................................................................................... 12
Antenna connections............................................................................................. 14
Cable TV connections............................................................................................ 14
TV operation
Starting setup........................................................................................................ 15
Roku setup . .......................................................................................................... 16
TV operation.......................................................................................................... 18
Quick guide for menu operation............................................................................. 20
Convenience functions.......................................................................................... 21
Channels setup...................................................................................................... 25
Setting the Parental Control................................................................................... 26
Closed Caption...................................................................................................... 29
CC options............................................................................................................. 30
Aspect Switching................................................................................................... 31
JPEG Viewer.......................................................................................................... 32
Additional information
Connections to other equipment............................................................................ 33
Reception disturbances......................................................................................... 37
Troubleshooting..................................................................................................... 38
Specifications........................................................................................................ 40
LIMITED WARRANTY........................................................................................... 42
LIMITED WARRANTY for Roku Ready® Streaming Stick®������������������������������������ 43
9
Features
HDTV
Unique space saving design in a 55” class TV.
Picture Performance
• Long Life LED Backlight
• 1080p Perfected
• Super Clear Anti-Glare Screen
Convenience
• PC Input (RGB)
• USB Input (JPEG Photo Viewer, Software Updates)
• CEC (Consumer Electronics Control): All HDMI® inputs.
• ARC (Audio Return Channel): HDMI2 input.
• Roku Ready® Streaming Stick® (RRSS) pre-inserted in HDMI3 input.
• MHL™(Mobile High Definition Link) available in HDMI3 input*.
*Remove RRSS to use another MHL device.
• Sleep Timer (10-240 min)
Audio Performance
• Dolby® Digital/MTS Stereo/SAP
This Television receiver will display television closed captioning, (
accordance with FCC rules.
or
), in
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
* VGA and XGA are trademarks of International Business Machines Corporation.
* Roku, Roku Ready Streaming Stick, and the Roku logo are trademarks or registered
trade marks of Roku, Inc.
* MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered
trademarks of the MHL, LLC.
10
Location of controls
Front
CH (CHANNEL)
/ Buttons
VOL (VOLUME)
+/– Buttons
MENU Button
INPUT Button
POWER Button
Remote sensor
Power Indicator
Red : Standby
Blue : On
Control Key
MENU button, CH (CHANNEL) / (▲/▼)
buttons, VOL (VOLUME) +/- (▶/◀) buttons and
INPUT(SELECT) button can be used to select the
desired setting during the menu screen operations.
Left side
Rear
USB INPUT
HDMI3/MHL* IN
*Roku Ready
Streaming Stick
inserted.
HDMI2 (ARC) IN
HDMI1 IN
Bottom side
AUDIO (R/L) IN
VIDEO IN
COMPONENT IN
AUDIO OUT
(Y/Pb/Pr)
(3.5mm)
AIR/CABLE IN
DIGITAL AUDIO
OUT
(COAXIAL)
PC IN
PC AUDIO IN
(3.5mm)
11
Remote control
POWER
HDMI1
HDMI3
HDMI2
INPUT
2
3
4
5
6
7
8
9
0
ENTER
SELECT
MENU
EXIT
MUTE
FAV
ASPECT
12
C.C.
AUDIO
P.MODE
LAST
INFO
POWER Button - Press to turn the TV’s power on/off.
HOME Button (MHL) - Press this button to switch
to Roku (HDMI3 input) as the source input, or turn to
the HOME menu of the Roku or other MHL device
connected.
Control Buttons (Play, Pause, Stop, Rewind,
Previous, Next, Fast Forward) These buttons are for
controlling devices (like Blu-Ray or DVD players) with
Consumer Electronics Control (CEC) through the HDMI
connection, or in the Roku mode. These buttons can also
be used with the JPEG viewer.
HI. Button - Press to show information about your TV.
HDMI Button - Press to directly access the HDMI Inputs.
INPUT Button - Display input list and change the TV’s
input source
Direct Channel Selection Buttons (0-9) - Allows direct
access to any channel of the TV.
– Button -This button is the “–” button and is used when
selecting digital channels.
SELECT/ENTER Button - Press to confirm or select
functions for the On-Screen menu.
CURSOR ▲/▼/◀/▶ Buttons - Use to navigate and
select menu functions.
MENU Button - Use to display the On-Screen menu
function.
EXIT Button - Press to exit the On-Screen menu.
VOL (VOLUME) + / – Buttons - Press the + button to
increase, or the – button to decrease the sound level.
MUTE Button - To turn off the sound, press this button
once. The TV will be silenced and the MUTE icon
will appear on the screen. The muting feature can be
released by pressing the MUTE button again or by
pressing VOL (VOLUME) + button.
CH (CHANNEL)
/
Buttons - Press to change the
channel of the TV.
FAV CH Button - Press to access the Favorite Channel
list.
C.C. Button - Use to select Closed Caption to “CC Off”,
“CC On Mute” or “CC On”.
AUDIO Button - Press to change the audio language.
LAST CH Button - Pressing this button allow you to go
back to the previous channel selected. Press this button
again to return to the channel you were watching.
ASPECT Button - Press to change the picture size.
P.MODE Button - Press to change the picture mode.
INFO/ Button - When you press this button the
current information will be displayed on the screen.
Remote control
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
(continued)
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover
BATTERY PRECAUTIONS
These precautions should be followed when using batteries in this device:
• The batteries may last approximately one year depending on how much the remote control
is used. Replace batteries when the remote operation becomes erratic.
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the batteries as indicated in the
battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or
Rechargeable) or old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions.)
• Please use caution when inserting batteries to avoid battery damage. If the spring
terminal in the remote control remains in contact with a side of a damaged battery it can
cause a short circuit. Never use damaged batteries as they can become very hot and are
dangerous.
• Never expose batteries (battery pack or batteries installed) to excessive heat such as
sunshine, fire or the like.
13
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that
correspond to your antenna system. If you are using a Cable TV service, see Cable
TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Connect the 75 ohm cable from the combination VHF/UHF
antenna to the Antenna Jack.
75 ohm
Coaxial
Cable
Antenna
Jack
Cable TV connections
This TV has an extended tuning range and can tune most cable channels without
using a Cable TV Converter box. Some cable companies offer “premium pay
channels” where the signal is scrambled. Descrambling these signals for normal
viewing requires the use of a descrambler device which is generally provided by the
Cable TV company.
For subscribers to basic Cable TV service
Antenna
Jack
For basic Cable TV service not requiring a Converter/
Descrambler box, connect the 75 ohm Coaxial Cable
directly to the Antenna Jack on the back of the TV.
75 ohm
Coaxial Cable
For subscribers to scrambled Cable TV service
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler
box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using
another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler box to
the Antenna Jack on the TV. Follow the connections shown below. Set the TV to the output
channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to select channels.
Incoming 75 ohm
Cable TV Cable
Converter/
Descrambler
75 ohm Cable to TV
Antenna
Jack
Antenna
Jack
75 ohm
Coaxialscrambled
Cable
For subscribers to unscrambled Cable TV service with
premium channels
If you subscribe to a Cable TV service in which basic channels are unscrambled and
premium channels require the use of a Converter/Descrambler box, you may wish to
use a signal Splitter and an A/B Switch box (available from the Cable TV company or an
electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any non-scrambled channels on your TV. With the switch
in the “A” position, tune your TV to the output of the Converter/Descrambler box (usually
channel 3 or 4) and use the Converter/Descrambler box to tune scrambled channels.
Incoming
75 ohm
Cable TV
Cable
14
Converter/
Descrambler
Splitter
A/B Switch A
Antenna
Jack
B
75 ohm Cable
to TV
75 ohm
Coaxial Cable
Antenna
Jack
Starting setup
The Setup Wizard appears the first time you turn on the TV, and assists you to specify
the Air/Cable setting, and program your channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection is made.
turn on the TV, press POWER. (It may take approx. 10 seconds for a picture to appear on
1 To
screen.) The Initial Setup Wizard begins.
2 Select your “TV Mode” by pressing ▲ or ▼ to select “Home” or “Retail”.
NOTE:
Home mode will remember customized user settings in TV.
Retail mode is intended for in-store display and resets user settings each time TV is turned
off.
3 Press ▶ to go to the next step.
4 Press ▲ or ▼ to select your menu language, then press ▶ to go to the next step.
5 Press ▲ or ▼ to select your time zone, then press ▶.
• In the rare event that you live within broadcast range of two stations in two different
time zones, the TV may recognize the wrong station for the auto clock set.
6 Press ▲ or ▼ to your desired time format, then press ▶.
7 Press ▲ or ▼ to select signal type that you using, then press ▶.
Channel Scan will begin. After the scan is completed, a TV channel appears on the
8 Auto
screen.
• Depending on the reception condition, it may take up to 30 minutes to complete
scanning channels. Please allow the process to complete without interruption.
completion of channel scan, Roku Ready Streaming Stick can be activated. Please
9 After
follow the steps on next pages for the Roku setup procedure.
NOTE:
• If you press EXIT during the “Auto Channel Scan” process, the Auto Channel Scan will stop
and the TV will change to the normal view.
• When you make a menu selection, your changes occur immediately. You do not have to press
EXIT to see your changes.
15
Roku setup
Roku Ready Streaming Stick
Choose from 2,000+ streaming channels.*
What you need*
This Roku Ready TV
Wireless Router
High speed Internet
*Subscription fees or other charges may be required to access certain channels. Content may not be
available in all areas in which the Roku Ready TVs are sold and channel availability and applicable
charges are subject to change. Internet access and Wi-Fi router not included.
Know your Streaming Stick
[MHL CONNECTOR] Plugs into the MHL port on the
back of your TV.**
[STATUS LIGHT] Signifies it is on when lit, or activity
when flashing.
[RESET BUTTON] Used to reset your Streaming Stick
(you probably won’t ever have to use this).
What to do
Plug your Roku Ready Streaming Stick into the MHL port
of your TV or other Roku Ready device.**
Simple as that!
HDMI
HDMI/MHL
Plug it in
Note: **This Roku Ready TV has the Roku Ready Streaming Stick pre-inserted into the TV at the
factory.
16
Roku setup
What to do (cont.)
(continued)
Connect to network
Now you can grab your remote and jump right into guided setup. Have your network name and
password ready and do the following:
• Select your network from the list of available networks.
• Enter your network password, if you use one. Remember, network passwords are case sensitive.
Complete guided setup
It’s the final stretch and hooray—it’s a breeze! Continue following the on-screen instructions and you’ll:
• Get the latest software.
• Link the Roku Ready Streaming Stick to your Roku account on your computer.
Your Roku account:
During setup, you’ll be prompted to create your Roku account online at roku.com/link. Your Roku Ready
Streaming Stick will generate a unique code that links your player to your new account. Roku accounts
are free to maintain. And, while a valid credit card number is required to create your account, rest
assured you will only be charged if you subscribe to a channel or authorize purchases of apps and
games from the Roku Channel Store.
Troubleshooting
If you cannot connect to your wireless home network during guided setup:
• If you are not getting 3 or more signal-strength bars above your wireless network, adjust the location
of your Roku Ready Streaming Stick and/or wireless router. Make sure there are no obstructions, like
cement walls, between your Roku Ready Streaming Stick and your wireless router.
• Make sure you select the correct wireless router name on the “Wireless” screen.
• Make sure you enter the correct password, if your network is security-enabled (password is case
sensitive).
• If you have turned off SSID broadcasting on your wireless router, you can add your network by
selecting “My network is not shown” from the “Wireless” screen.
If you cannot hear sound:
• Make sure the connectors on the cables between your TV and home theater receiver are pushed in all
the way.
• Make sure the volume on your TV or home theater receiver is turned up and isn’t on mute.
• Make sure the input on your TV or home theater receiver matches the output (HDMI or MHL) used
with your
Need more help?
roku.com/support
Get the most out of your Roku Ready Streaming Stick. Check out our FAQs, instructional videos and
user forums.
17
TV operation
turn on the TV, press POWER. (POWER indicator on the front of the unit changes blue. It
1 To
may take approx.10 seconds for a picture to appear on screen.)
the volume level by pressing VOL (VOLUME) + or – . The volume level will be
2 Adjust
indicated on the screen by a volume bar. If the volume increases, the number of bars
also increases.
If the volume decreases, the number of bars also decreases.
3 Set the Source option to the appropriate selection (see “Air/Cable selection” on page 25).
4 Press the Direct Channel Selection Buttons (0-9, –) to select the channel.
TO SELECT ANALOG CHANNELS
1-9:
10-99:
100-135:
Press 1-9 as needed.
Example,to select channel 2,press 2, then press SELECT.
Press the 2 digits in order.
Example, to select channel 12, press 1, 2, then press SELECT.
Press the 3 digits in order.
Example, to select channel 120, press 1, 2, 0, then press SELECT.
TO SELECT DIGITAL CHANNELS
Press the first digits, then press the – button followed by the remaining number.
Example: To select channel 15-1, press 1, 5, –, 1, then press SELECT.
• If a channel is selected with only audio content, “Audio Only” will be displayed on the
screen.
• If a channel is selected with a weak digital signal, “Weak or No Signal” will be displayed
on the screen.
• To direct tune to a digital channel that is not stored in the channel list enter the first
digits followed by - and press SELECT. For example if you want to select channel 15-2,
press 1, 5, - then press SELECT.
• The same program may be available on either an analog channel or a digital channel.
You may choose to watch either format.
VHF/UHF/CABLE CHANNELS
Air
VHF
2-13
UHF
14-69
Cable
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-135 (100) (135)
01
(4A)
NOTE:
• If a channel with no broadcast is selected, the sound will automatically be muted.
• It may take a few seconds for a digital channel picture to appear on screen after being
selected.
18
TV operation
To select the Audio/Video input source
(continued)
To view a signal from another device connected to your TV, such as a Blu-ray player, press
INPUT, then press ▲ or ▼ to select the desired input, then press SELECT.
CH
/
Press and release CH / . The TV automatically stops at the next channel.
For proper operation, before selecting channels, they should be set into the memory. See
“Channels setup” on page 25.
INFO/
Press INFO to display the current information on the screen.
When the TV receives a digital signal, the digital information will appear.
•
•
•
•
•
Channel number
Channel label (if preset)
Parental Control
Program guide
Resolution
Press INFO again to clear the display.
•
•
•
•
•
DTV Signal condition
Broadcast program name
Signal Type
Current date and time
Audio language
LAST CH
This button allows you to go back to the last channel selected by pressing LAST CH. Press
LAST CH again to return to the channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV’s sound will be silenced and MUTE icon will
appear on the screen. The sound can be switched back on by pressing this button again or
by pressing the VOL (VOLUME ) + button.
19
Quick guide for menu operation
Example: Select Menu Language.
1
2
3
4
5
6
Press INPUT to select TV mode.
Press MENU. The TV menu screen will appear.
Press ◀ or ▶ to select “Setup”, then press SELECT.
Press ▲ or ▼ to select “Menu Language”, then press SELECT.
Press ▲ or ▼ to select desired language.
Press EXIT to return to the normal screen.
NOTE:
• On the following pages, the menu can be called in the same way described above, by
pressing the MENU button.
• If no buttons are pressed for more than about 30 seconds, the TV will return to normal
viewing automatically.
• During TV or external input mode (except PC input mode), if there is no signal reception
or external device is disconnected, the TV will automatically go to standby mode after
approx. 15 minutes (in PC input mode: 1 minute).
20
Convenience functions
You can change the default settings by pressing the MENU button on your remote, then
select the one of the icons at the top of the menu - follow the On-Screen prompts to set your
preferences.
Icon
Channels
Video
Selected Items
Picture Mode
Standard
Dynamic
Movie
Game
ECO
Custom
Contrast
Brightness
Sharpness
Tint (except PC
input mode)
Color
Color Temperature
Aspect Ratio
Noise Reduction
DBC
Off / Low / Mid / High
On / Off
Backlight
PC Settings
H. Position
V. Position
Clock
Phase
Auto Adjust
Setup Hint
See page 25. (Only accessible in the TV
input).
Standard picture quality.
Bright and dynamic picture.
Soft edge picture setting.
Optimizes speed when playing video
games.
Backlight brightness level is reduced to
save energy.
Your personal preferences.
You can adjust the picture quality to your
preference.
Cool (Bluish) / Standard (Neutral) / Warm
(Reddish)/Custom (R/G/B) to user prefer
settings.
See page 31.
Set the level of decreasing noise included
in the video signal.
Use this feature to change the black level
automatically according to the brightness of
an image. The black level will become dark
in a dark scene.
Adjust the backlight brightness level.
To adjust the horizontal placing of the
image.
To adjust the vertical placing of the image.
Eliminates the vertical (CLOCK) interfering
lines.
Eliminates the horizontal (PHASE)
interfering lines.
To adjust the all PC settings automatically.
21
Convenience functions
Icon
Audio
Selected Items
Sound Mode
Standard / News / Movie
/ Sports
(continued)
Setup hint
You can choose a basic equalizer mode.
Depending on this setting, the EQ settings are
set to the pre-defined values of each mode.
The setting of this item adjusts the audio level of
the selected frequency.
Custom
120 Hz / 500 Hz/
1.5KHz/5KHz/10KHz
Balance
Adjust the left and right sound channel volume.
Perfect Volume
Volume level is adjusted automatically to lower
volume of loud scenes and to raise volume of
On / Off
quieter scenes.
Surround
The dynamic presence and sound created offers
a thoroughly enjoyable listening experience.
On / Off
Digital Output
Raw / PCM
Lip Sync
Speaker Delay
Digital Out Delay
Internal Speakers
On / Off
Locks
22
Select the format for your digital audio output If
you have connected an amplifier / receiver to the
digital audio jack on your TV.
Synchronizes audio with video signal on digital
and analog sources
This function is useful when using external
speakers. Select On if using the internal
speakers only. Select Off if you prefer to use the
speakers from a separate stereo system. When
Internal Speakers are set to On, analog Audio
Out output is fixed. When Internal Speakers
are set to Off, the analog Audio Out output is
variable.
See page 26.
Convenience functions
Icon
Setup
Selected Items
Menu Language
English / Français /
Español
Preferred Audio Language
English / Français /
Español
Closed Captions
Reset
No / Yes
Setup Wizard
Demo Mode
On / Off
Roku/MHL
No / Yes
Health Remind
On / Off
HDMI - CEC
CEC Enable
Device Auto Off
TV Auto On
ARC
Device Lists
Connect
Root Menu
About Your TV
Software update (USB)
(continued)
Setup hint
You can choose from three different languages
(English, Français (French) and Español (Spanish))
for the on-screen displays.
Select the language you prefer first, then proceed
with the other menu options.
When two or more audio languages are included
in a digital signal, you can select one of the audio
languages. (This function is available only for digital
broadcasts.)
See page 29.
Restore Video, Audio (except “Audio Language”),
Time (Sleep Timer, Time Format and Auto Sleep
only) and Setup (except “Menu Language”) settings
to the default factory settings.
See page 15.
Turn the demo mode On.
A TV feature introduction will be popped up at the
top of the screen.
Activate or deactivate the Roku/MHL.
Switch the Health Remind On or Off.
While Health Remind is set to On, a prompt picture
will remind you to have a break at intervals of two
hours.
Select “On” to enable CEC features.
When the user turns off the TV, all active CEC
enabled devices on the HDMI input will go to
Standby.
Pushing the “Play” button on the CEC enabled
device will command the device to play , turn the TV
on, and the HDMI input, that the device is connected
to, will become the active input device for the TV.
To enable the audio through an AV receiver using
HDMI (ARC).
Display devices that are connected to TV.
To make a connection to a device shown on the
device list.
To access the device menu.
Shows model number and software versions.
Update the software.
23
Convenience functions
Icon
Time
Selected Items
Clock
Auto Clock
On / Off
Year
Month
Date
Hour
Minute
Daylight Savings
On / Off /
Auto
Sleep Timer
Off / 10 / 20 / 30 / 60
/ 90 / 120 / 180 / 240
min
Auto TV off
Off / 1 / 2 / 3 / 4 Hours
Time Zone
Time Format
12-hour / 24-hour
24
(continued)
Setup hint
The Auto Clock function will automatically set the
built-in clock (Year, Month, Day and Time) when the
TV is connected to an antenna or cable TV system
and it is turned off. As the TV searches for a receivable station in your area and it receives a broadcast
signal for Auto Clock, the Auto Clock needs several
minutes to set itself.
Use the ▲/▼/◀/▶ buttons to set the Year, Month,
Day and Time
• Available only when you set “Auto Clock” to “Off”.
If you want to activate Daylight Saving Time, select
“On”.
Sleep Timer switches the TV to standby after a
defined period of time.
To cancel the Sleep Timer, set to “Off”.
The TV will automatically switch to standby when
there is no remote control or control panel key operation for the set amount of time.
Select your local time zone for auto clock feature.
You can select Newfoundland, Atlantic, Eastern,
Central, Mountain, Pacific, Alaska, Hawaii and
Samoa.
Select the time format.
Channels setup
This TV is equipped with a Channel List
feature which allows channels to skip up
or down to the next channel set into the
Channel List, skipping over unwanted
channels.
Before selecting channels, they must be
scanned into the TV’s Channel List.
Auto Channel Scan
“Channels” ⇒ “Auto Channel Scan”,
1 Select
then press SELECT.
Air/Cable selection
1 Select “Channels” ⇒ “Source”.
2 Press ◀, ▶, or SELECT to select “Air” or
“Cable”.
Air - VHF/UHF channels
Cable - CABLE TV channels
2 In the confirmation window, press ▶ to
select “Yes”. The TV will begin scanning all
the channels available in your area.
• It may take from 15 minutes to 30
minutes to complete channel scan.
• Depending on the reception condition
the progress bar may not advance for
several minutes, please be patient.
• If you press EXIT while scanning, the
channel scan will stop.
NOTE:
NOTE:
• It may take a few seconds for a digital
channel picture to appear on screen after
being selected.
• If you are unsure of the digital channels
available in your area, you may visit www.
antennaweb.org to receive a list based on
your address or zip code. If you require
further assistance you may call our tollfree customer service line at 800.HITACHI
(800.448.2244) (USA/CANADA).
• New channels may be added to your area
periodically, it is recommended to perform
the “Auto Channel Scan” procedure
regularly.
3
The new channels will be added into the
channel list.
25
Channel Manager
You can select the channel that you want to
add to favorite.
1 Select “Channels” ⇒ “Favorite CH List”,
then press SELECT.
2 Press ▲ or ▼ to select the channel that
you want to add.
Setting the Parental
Control
An age limitation can be set to restrict
children from viewing or hearing violent
scenes or pictures that you may choose to
exclude. The restriction applies to “US” TV/
Movie Ratings and “Canada” English/French
Ratings if this data is transmitted. You may
set this restriction separately. To use the
Parental Control function, you must register
a password.
To enter a password
1 Select “Locks”, then press SELECT.
2 Press 0000 using Direct Channel
Selection Buttons (0-9). (This is default
password.)
SELECT to assign FAV mark for
3 Press
wanted channel.
4 Repeat steps 2 - 3 for other channels you
want for Favorite.
You can also select the channel that you want
to skip.
1 Select “Channels” ⇒ “Channel Skip”, then
press SELECT.
2 Press ▲ or ▼ to select the channel that
you want to skip.
“ ” appears instead of the number.
NOTE:
• If you forget your password, use the factory
password 7777, you can then gain access
to change your password if necessary.
• To avoid forgetting the password, write it
down and keep in a safe place.
How to enter the Parental Control
menu
1 Select “Locks” menu, then press
SELECT.
2 Use Direct Channel Selection Buttons
(0-9) to enter your password.
SELECT to assign 3 mark for
3 Press
unwanted channel.
4 Repeat steps 2 - 3 for other channels you
want to skip.
26
To set the Parental Control
Movie Rating:
G : All ages
PG : Parental guidance
PG-13 : Parental guidance less than 13
years old
R : Under 17 years old parental
guidance suggested
NC-17 : 17 years old and above
X : Adult only
1 In the Lock menu, press ▲ or ▼ to select
“Parental Control” then press SELECT to
set to “On”.
2 Press ▲ or ▼ to select “US”, then press
SELECT.
3 Press ▲ or ▼ to select “TV Rating” then
press SELECT.
4 Press ▲/▼/◀/▶ to select which rating will
be used, then press SELECT. Each rating
below will appear.
TV
5
Press SELECT to select the desired
rating.
Press EXIT to return to normal viewing.
Parental Control function is activated now.
Canadian rating systems
1 In the Locks menu, press ▲ or ▼ to select
“Parental Control” then press SELECT to
set to “On”.
You can set the rating using age level and
genre.
Age:
TV-Y : All children
TV-Y7 : 7 years old and above
TV-G : General audience
TV-PG : Parental guidance
TV-14 : 14 years old and above
TV-MA : 17 years old and above
TV-NONE: Not Rated (NR) and Not
Applicable (NA) programs.
Genre:
FV
: Fantasy Violence
D
: Dialogue
L
: Language
S
: Sex
V
: Violence
Press ◀ or ▶ to select the desired rating,
then press SELECT.
2 Press ▲ or ▼ to select “Canada”, then
press SELECT.
3 Press ▲ or ▼ to select “English Rating” or
“French Rating”, then press SELECT.
4 Press ▲ or ▼ to select rating and then
press SELECT.
Canada English ratings
You can set the rating using age level.
C :Programming intended for children
under age 8
C8+ :Programming generally considered
acceptable for children 8 years and
over to watch on their own
G :General Audience
PG :Parental Guidance
14+ :Programming contains themes or
content which may not be suitable for
viewers under the age of 14
18+ :Adult
27
Canada French ratings
: General: All ages and children,
contains minimal direct violence,
but may be integrated into the
plot in a humorous or unrealistic
manner.
8ans+ : General but inadvisable for
young children: May be viewed
by a wide public audience,
but could contain scenes
disturbing to children under 8
who cannot distinguish between
imaginary and real situations.
Recommended for viewing with
parent.
13ans+ : Over 13 years: Could contain
scenes of frequent violent scenes
and therefore recommended for
viewing with parent.
16ans+ : Over 16 years: Could contain
frequent violent scenes and
intense violence.
18ans+: Over 18 years: Only for adult
viewing. Could contain frequent
violent scenes and extreme
violence.
G
To download the additional Parental
Control rating system (when available)
1 In the Locks menu, press ▲ or ▼ to select
“Parental Control” then press SELECT to
set to “On”.
2 Press ▲ or ▼ to select “Region 5”, then
press SELECT.
3 If the TV is not storing the additional
rating system, the TV will begin
downloading it, which may take some
time to be completed.
4 Set your preferred content rating limits for
the additional rating system.
NOTE:
• The TV can download an additional rating
system only when receiving a digital signal
that carries the Region 5 rating information.
• When you download the additional rating
system, it may take some time for the
download to occur.
• The Parental Control rating information and
system are not determined or controlled by
the TV.
• The standard Parental Control rating
system is available whether your TV is
Press EXIT to return to normal viewing.
receiving a digital signal or not, and will
Parental Control function is activated now.
block both analog and digital programs.
NOTE:
• To set the restriction level using the
• The Parental Control function is activated
standard Parental Control rating system,
select “US” in step 2.
only on programs and input sources that
• The downloadable Parental Control rating
include a rating signal.
system is an evolving technology, and
availability, content, and format may vary.
To change the password
5
1 In the Locks menu, press ▲ or ▼ to select To clear the Region 5
“Change Password”, then press SELECT.
the Locks menu, press ▲ or ▼ to select
2 Enter your old password using Direct 1 In“ Parental
Control” then press SELECT to
Channel Selection Buttons (0-9).
set to “On”.
3 Enter your new password using Direct 2 Press ▲ or ▼ to select “Reset Region 5”,
Channel Selection Buttons (0-9).
Downloading the additional Parental
Control rating system
(Region 5)
As a supplement to the standard Parental
Control rating system, your television is able
to download an additional rating system,
if such a system becomes available in the
future.
28
then press SELECT.
The confirmation window will appear.
3 Press ▶ to select “Yes”.
Your Region 5 will clear.
Closed Caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television
programs. Closed Captioning will display text on the screen for hearing impaired viewers.
Captions: This Closed Caption mode will display text on the screen in English or another
language. Generally, Closed Captions in English are transmitted on CC1 and Closed
Captions in other languages are transmitted on CC2.
Text: The Text Closed Caption mode will usually fill 1/2 of the screen with a programming
schedule or other information.
1
2
3
4
Select “Setup” ⇒ “Closed Captions”, then press SELECT.
Press SELECT to set “Caption Display”, then press ▲ or ▼ to select “CC On”, “CC on
Mute”, or “CC Off”.
CC On: Captions will be displayed on the screen.
CC on Mute: Only when you press MUTE, captions will be displayed.
CC Off: Captions will not be displayed on the screen.
Press ▲ or ▼ to select “Analog Closed Caption” or “Digital Closed Caption”.
When you select “Analog Closed Caption”, you can choose from CC1~4, Text1~4.
When you select “Digital Closed Caption”, you can choose from Service1~6 and Off.
Press ▲ or ▼ to select the desired Closed Caption mode for both Digital and Analog
Captions.
NOTE:
• Depending on the broadcast signal, some Analog Captions will function with a
Digital broadcast signal. This prevents two types of captions from overlapping.
• If text is not available in your viewing area, a black rectangle may appear on-screen.
If this happens, set the CC Setting to “CC Off”.
• When selecting Closed Captions, the captioning will appear after approx. 10
seconds.
• Misspellings or unusual characters may occasionally appear during Closed
Captioning.
This is normal with Closed Captioning, especially with live programs. This is
because during live programs, captions are also entered live. These transmissions
do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume may be
seen but may interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed
Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the closed caption may
not appear or may appear with strange characters or misspelled words. In this
case, adjust the antenna for better reception or use an outdoor antenna.
29
CC options
When you have selected “Custom” as the display method, you can adjust the
various setting listed below.
This feature is designed to customize Digital Caption only.
1
2
3
4
5
6
Select “Setup” ⇒ “Closed Captions” ⇒ “Caption Display”, then press SELECT.
Press ▲ or ▼ to set “Caption Display” to “CC Off”, “CC on Mute” or “CC On”.
Select “Digital Caption Options”, then press SELECT.
Press ▲ or ▼ to select “Caption Style”, then press SELECT.
Press ◀ or ▶ to set the “Caption Style” to “Custom”.
Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to change the setting.
You can select from among the following items and parameters.
Font:
Select display font style.
Size:
Select display font size.
Edge Effect.
Select display font edge style.
Edge Color:
Select display font edge color.
Text Color:
Select foreground color.
Background Color:
Select background color.
Text Opacity:
Select foreground opacity level.
Background Opacity:
Select background opacity level.
NOTE:
• You cannot set both “Text Color” and “Background Color” as the same color.
30
Aspect Switching
You can change the picture size being displayed — Normal, Wide, Zoom, Cinema, PC
Mode.
Selecting the picture size
1
2
Select “Video” ⇒ “Aspect Ratio”, then press SELECT.
Press ▲ or ▼ to select the desired aspect ratio, as described below.
NOTE:
• Selectable aspect ratios may vary depending on the input source or broadcast signal.
• You can select the desired size of the picture being displayed by pressing ASPECT on the
remote control.
Normal
In some cases, the image will display the size of
standard 4:3 with black side bars.
Wide
Displays the picture at the maximum size.
Zoom
The entire picture is uniformly enlarged—it is
expanded horizontally and vertically.
The top and bottom edges of the picture may be
hidden.
Cinema (for letter box programs)
For 4:3 images the entire picture is uniformly
enlarged—it is stretched the same amount both
wider and taller (retains its original proportion). For
16:9 images the picture is enlarged vertically.
The top and bottom edges of the picture may be
hidden.
PC Mode
4:3
16:9
The entire picture is uniformly enlarged and
displayed at 100%. This aspect mode is only
available in the HDMI inputs.
31
JPEG Viewer
You can enjoy viewing pictures from your USB storage device.
1
2
Connect the USB storage device into the USB Input terminal.
Press INPUT and press ▲ or ▼ to select “USB”, then press SELECT.
NOTE:
• Do not disconnect a USB storage device while it is being accessed. Doing so can
damage the device or the files stored on the device. You can safely connect or disconnect
the USB storage device when the TV is not in USB mode.
• Back up all the data in the USB storage device in case if data was lost due to unexpected
accident. We do not assume any liability for the losses by misuse or malfunction.
• Not all USB storage devices are compatible with this TV.
• The character that exceeds the display area is not displayed.
• Do not use a USB extension cable.
• Playable files are JPEG (.jpg/.jpeg).
USB Browser
File Selection
NOTE:
• The content will change in accordance with each media setting screen
Playback files
1
2
3
32
Press SELECT to select Photo.
Press SELECT to select “C”.
Select a folder or file using the ▲/▼/◀/▶ buttons and then start photo viewing by
pressing the PLAY button.
Connections to other equipment
To connect the TV to a HDMI device to the TV
The HDMI input receives digital audio and video from an HDMI device.
Left of the TV
To HDMI IN
HDMI cable
(not supplied)
To HDMI output
HDMI device
NOTE:
• HDMI input audio does not support DTS audio.
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF
YOUR PC’S RESOLUTION AND REFRESH RATE (60 HZ).
Connect one end of a (male to male) VGA cable to the video terminal of the computer and
the other end to the PC IN on the rear of the TV. Attach the connectors firmly with the screws
on the plug. In case of a Multimedia computer, connect the audio cable to the audio output
of your Multimedia computer and to the PC Audio IN on the rear of the TV. You can also
connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the
audio cable. If you use DVI-to-HDMI cable, please connect audio cable as same way as VGA
cable.
Press INPUT on the remote control to select PC Input.
Switch on the computer. The TV can operate as the computer monitor.
Bottom of the TV
To PC AUDIO IN
To PC IN
Audio cable (not supplied)
VGA cable (not supplied)
Monitor Display modes
Mode
VGA
VGA
SVGA
XGA
WXGA
WXGA
SXGA
WXGA+
WSXGA+
FHD
Resolution Refresh rate
640x480
60/ 75 Hz
720x400
70Hz
800x600
60/ 75 Hz
1024x768 60/ 70/ 75 Hz
1280x720
60Hz
1360x768
60Hz
1280x1024
60Hz
1440x900
60Hz
1680x1050
60Hz
1920x1080
60Hz
NOTE:
•The on-screen displays will have a different appearance in PC mode than in TV mode.
•If there is no video signal from the PC when the unit is in PC mode, “Weak or No Signal” will
appear on the TV-screen.
•When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from
the FHD signal, which has been confirmed operational on this TV, may appear depending
on the PC used. In this case, “Auto Adjust” or other position adjustment functions may
fail to correct the image position. To solve this problem, change the PC settings to select
another resolution.
33
Connections to other equipment
(continued)
To connect the TV to a MHL device
CONNECTING A MHL-ENABLED DEVICE:
You can connect a MHL-enabled device, such as a SmartPhone or MHL dongle to show its
screen image on your TV, while simultaneously charging the phone.
To connect a new MHL device to the HDMI3 input please use your common screwdriver to
remove the screw securing the Roku Ready Streaming Stick (RRSS) holder. Then remove the
RRSS from HDMI3.
1. Connect a MHL cable (not provided) to the micro USB port on the device, then connect the
other end of the cable to the HDMI3 /MHL jack on the side of your TV.
2. Press the INPUT button on the remote control and select HDMI3 input source.
3. Your device’s menu opens. You can use CURSOR left, right, down, or up buttons to navigate
on your device, and press the SELECT button on the remote control to access its menu.
NOTE:
• Your device’s menu varies with the device and the apps you have loaded.
4. The Roku Ready Streaming Stick is pre inserted for your convenience. Please see the Roku
Guide for detailed operation information at www.roku.com. In the event that you install another
MHL-device the
HOME button on the remote control will function as the MHL home button.
You can press the INPUT button on the remote control and select HDMI3 as the source.
34
Connections to other equipment
(continued)
The exact arrangement you use to interconnect various video and audio components to this
TV is dependent on the model and features of each equipment. Check the Owner’s Manual
provided with each component for the location of video and audio inputs and outputs.
To connect the TV to a VCR, a
Bottom of the TV
camcorder, or a game console
VCR
To VIDEO/AUDIO IN
Video/Audio cable
(not supplied)
Camcorder
or
GAME CONSOLE
To Video/Audio OUT
To connect the TV to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT
jacks of your DVD player with the component video cables (not supplied).
Bottom of the TV
To AUDIO IN
To COMPONENT IN
(Y/Pb/Pr)
DVD
To Component OUT
Y Pb Pr
To Audio OUT
Component video cable
(not supplied)
Audio cable
(not supplied)
NOTE:
• The Component Video input of this TV is compatible with 480i/1080i interlaced signals
and 480p/720p progressive signals.
35
Connections to other equipment
(continued)
To connect the TV to an audio system
This connection allows you to use an audio amplifier and external speakers.
Bottom of the TV
To AUDIO OUT
To Audio (L)/(R) Inputs
Amplifier
Audio cable (not supplied)
Using an AV Amplifier with built-in digital surround
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy broadcast
or cable programs that provide Dolby Digital sound.
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.
Bottom of the TV
To DIGITAL AUDIO OUT
(COAXIAL)
TV
Front
Speaker
(Left)
Front
Speaker
(Right)
Coaxial digital cable
(not supplied)
To Coaxial
Digital Audio Input
AV Amplifier with built-in digital surround decoder
36
Center Speaker
Surround
Speaker
(Left)
Subwoofer
Surround
Speaker
(Right)
Reception disturbances
IGNITION NOISE:
Black spots or horizontal streaks may appear, picture may
flutter or drift. Usually caused by interference from automobile
ignition systems, neon lamps, electrical drills, and other electrical
appliances.
GHOSTS:
Ghosts are caused by the television signal following two paths.
One is the direct path and the other is reflected from tall buildings,
hills or some other objects. Changing the direction or position
of the antenna may improve reception. Ghosting may also be
caused by defects in the antenna system such as unshielded
leads or connecting several sets to the same antenna without
using multiple antenna couplers.
SNOW:
If your receiver is located in the fringe area of a television station
where the signal is weak, your picture may be marred by the
appearance of small dots. When the signal is extremely weak,
it may be necessary to install a special antenna to improve the
picture.
RADIO FREQUENCY INTERFERENCE:
The interference produces moving ripples or diagonal streaks,
and in some cases, causes loss of contrast in the picture.
PREVENTION OF AN OBSTACLE TO RADIO RECEIVERS
This television has been designed pursuant to the FCC class
B Rules. This is to prevent a problem to Radio receivers. If this
television causes a problem to Radio receivers, then take the
following steps:
• Keep the television away from Radio.
• Adjust Radio antennas in order for the television not to receive
interference.
• The antenna cable of Radio should be kept away from the
television.
• Use a coaxial cable for antenna.
You can check if this television influences Radio receivers by
turning off all other equipment other than the television. If you find
a problem receiving Radio when using the television, check the
instructions mentioned above.
BLOCK NOISE or FREEZE (DIGITAL INPUT):
Fuzzy blocks may appear in some area or the whole area of the
screen. This is usually caused by interference from automobile
ignition systems, neon lamps, electrical drills, ghosting of the
image and lost or weak receiving signals.
NOTE:
• The TV set can generate sound distortion in external devices such as a radio. Please
separate radio equipment from the TV set to a considerable distance.
37
Troubleshooting
Use the following checklist for troubleshooting if you have problems with your TV. Consult
your local dealer or service outlet if problems persist. Be sure all connections are properly
made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
TV does not
operate.
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
Poor sound or
no sound.
• Station or Cable TV experiencing problems, tune to another station.
• Check sound adjustments (Volume or Mute).
• Check for sources of possible interference.
• Check for audio language setting.
Poor picture or
no picture.
• Station or Cable TV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or Cable TV connections, adjust antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
Poor reception
on some
channels.
• Station or Cable TV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive desired station.
• Check for sources of possible interference.
Poor color or
no color.
• Station or Cable TV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or Cable TV connections, adjust antenna.
• Check for sources of possible interference.
Picture wobbles
or drifts.
• Station or Cable TV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Adjust antenna.
Digital
broadcasting
screen problem.
• Check digital signal strength.
If the problem cannot be solved with the suggested procedures, contact
800.HITACHI.
For your safety, never try to repair the product yourself.
38
Troubleshooting
SYMPTOMS
(continued)
POSSIBLE SOLUTIONS
No CATV
reception.
• Check all Cable TV connections.
• Set Source menu option to the Cable mode.
• Station or Cable TV system problems, try another station.
Horizontal or
diagonal bars on
screen.
• Check antenna connections, adjust or re-direct antenna.
• Check for sources of possible interference.
No reception
above channel
13.
• Make sure the appropriate Source (Air or Cable) has been selected.
• If using antenna, check UHF antenna connections.
No Remote
operation.
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV (within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the Remote and the TV.
• Make sure the power cord is plugged in.
TV shuts off.
• Sleep Timer is set.
• Power interrupted.
• Auto TV Off is set.
• TV station experiencing problems or program tuned is not closed
captioned. Try another channel.
Closed Caption is
• Check Cable TV connection or VHF/UHF antenna, reposition or
not activated.
rotate antenna.
• Set Closed Caption Decoder in the menu.
TV is not shown in
your language.
• Select proper language in the menu options.
Cannot connect
to your wireless
home network
during guided
setup
• Adjust the location Roku Ready Streaming Stick and/or wireless
router if the signal-strength is not 3 or more signal-strength bars on
wireless network.
• Make sure there are no obstructions, like cement walls, between
the Roku Ready Streaming Stick and the wireless router.
• Make sure to select the correct wireless router name on the
“Wireless” screen.
• Make sure to enter the correct password, if the network is securityenabled (password is case sensitive).
• If SSID broadcasting is turned off on the wireless router, add the
network by selecting “My network is not shown” from the “Wireless”
screen.
39
Specifications
Model
Panel size
Display method
Number of Pixels
Broadcasting
system
Receiving
channels
Tuner type
Inputs
Outputs
LE55A6R9
55” class 54.64” diagonal (1387.8mm)
Transmission TFT color LCD panel
1920(H) × 1080(V)
US system M
ATSC standard (8VSB), QAM
VHF
2-13
• Digital Terrestrial Broadcast(8VSB): 2-69
UHF
14-69
• Digital Cable (QAM): 1-135
CATV
14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-135 (100)-(135)
01 (4A)
Frequency synthesized
Video:
1.0 V (p-p),75 ohms
Audio:
2Vrms Max.
Component video:
(Y) 1.0 V (p-p), 75 ohms,
(Pb)/(Pr) 0.7 V (p-p), 75 ohms
HDMI: HDMI compliant (type A connector)
HDCP compliant
E-EDID compliant
HDMI1.4a, ARC, CEC
Scan rates: 480i, 480p, 720p, 1080i, 1080p
MHL:
MHL 1.4
PC Monitor:
Mini-Dsub 15pin
Antenna: VHF/UHF In 75 ohms coaxial
Digital audio (COAXIAL): 0.5 V (p-p), 75 ohms terminated
Audio Out (3.5mm Stereo): 470 mVrms, 1k ohms
Speakers
Downfiring. 157.5 mm × 40 mm x 37 mm 8 ohms × 2,
Audio output power 8.0W + 8.0W
Power supply
Power
consumption
AC 120V, 60Hz
Operation: 125W
Standby: <1W ( <2.5W when RRSS active)
Weight
Dimensions
13.5kg (29.8lbs)
Width: 1240.6mm (48-7/8”)
Height: 770.3mm (30-3/8”)
Depth:209.0mm (8-1/4”)
5˚C - 35˚C
Operating
temperature
Operating humidity Less than 80% RH
Accessories
Remote control
AC cord
Batteries (AAA) × 2
Stand x 2 (R, L), Stand Screws x 4 (M8 x 16)
Owner’s Guide
Quick Start Guide
Roku Ready Streaming Stick (Pre-inserted into HDMI3 input)
• Designs and specifications are subject to change without notice.
• For information on our other products, please visit our website at www.hitachi.us
40
800.HITACHI
(800.448.2244)
Monday ~ Friday
9:00 am - 6:00 pm EST
www.hitachi.us/tv
HITACHI AMERICA, LTD., DIGITAL MEDIA DIVISION
HITACHI has made every effort to assure you enjoy trouble free operation from your Hitachi
product. Should you require service assistance with OPERATIONAL, HOOK UP, TECHNICAL
ASSISTANCE OR WARRANTY SERVICE SUPPORT, please contact one of our knowledgeable
Customer Service Advocates at 800.HITACHI (800.448.2244).
Please be prepared to submit proof of purchase and/or delivery receipts to your 800.HITACHI
Customer Service Representative. Warranty coverage will be provided in accordance with the
provisions of your Limited Warranty (see the Limited Warranty page in this operating guide).
Pour de plus amples renseignements sur le service durant la periode couverte par la garantie,
sur le fonctionnement ou pour de l'assistance techniquie communiquez avec:
Au Canada: 800.HITACHI (800.448.2244)
Lundi ~ Vendredi
9:00 am - 6:00 pm HNE
Hitachi America, Ltd., Digital Media Division
Customer Service Support
P.O. Box 99652
Troy, MI 48099
customerservice.ce@hal.hitachi.com
41
Congratulations on your purchase of a new Hitachi display product.
LIMITED WARRANTY:
Hitachi America Ltd., warrants this product in accordance with the terms and conditions applicable to the products identified below:
Conditions of Hitachi Limited Warranty: This Hitachi display product (the “Product”) is warranted to be free from defects in materials and
workmanship beginning on the date of purchase by the original owner and continuing for the duration of the applicable time periods specified below.
If the Product is found to be defective, Hitachi will repair or replace (at Hitachi’s option) defective parts at no charge, subject to the conditions of this
Limited Warranty. If the original owner rejects, refuses or otherwise does not accept Hitachi’s offer to repair or replace such defective parts under
this Limited Warranty, this Limited Warranty shall be void and of no further force or effect. This Limited Warranty extends to the original owner
only and is not transferable, and such owner must provide a dated sales receipt for the Product to qualify for parts or service under this Limited
Warranty. The original owner must notify Hitachi of a defect claim by calling 800-HITACHI during the applicable Limited Warranty period for
this Limited Warranty to be effective. This Limited Warranty is valid only in the U.S.A., Canada and Puerto Rico.
Hitachi Product: LCD Flat Panel Televisions PARTS: The Limited Warranty period for parts is 1 year from the date of original purchase. During the
Limited Warranty period for parts, Hitachi will replace defective parts with new or rebuilt parts (at Hitachi’s option) at no charge for such parts. Any
replacement part will be warranted for the remainder of the original warranty period applicable to the part replaced. LABOR: The Limited Warranty
period for labor is 1 year from the date of original purchase. During the Limited Warranty period for labor, Hitachi will repair or replace (at Hitachi’s
option) defective parts without charge for labor. SERVICE LOCATION: In-home warranty service, which includes either in-home repair or free
pick-up and delivery (at Hitachi’s option), applies to all Hitachi products except: (i) 43-inch and smaller LCD Flat Panel Televisions; (ii) Products
located outside the U.S.A., Canada or Puerto Rico; (iii) Products located more than seventy-five (75) driving miles from Hitachi’s nearest Authorized
Service Facility. If the foregoing clauses (i), (ii), (iii) apply, then the Product owner will be responsible for bringing/delivering the Product to a
Hitachi Authorized Service Facility and, following warranty service, retrieving the Product from such Authorized Service Facility.
IMPORTANT: Before using or installing your Product, please complete this form and attach your sales receipt and retain them for your records.
This will help facilitate proper warranty coverage.
MODEL NO.
DEALER NAME
DEALER ADDRESS
CITY
SERIAL NO.
DATE OF PURCHASE
STATE / PROVINCE
Warranty Limitations. THIS HITACHI LIMITED WARRANTY DOES NOT COVER: A. Any Product that has been modified or repaired in a
manner not previously authorized by Hitachi in writing. B. Any Product, whose serial number has been removed, altered, replaced, defaced or
rendered illegible. C. Any defect, malfunction, or failure caused by or resulting from improper or unauthorized service, maintenance or repair. D.
Damage resulting from abuse, misuse, mishandling, neglect or damage caused by exposure to hostile operating environments such as areas
containing dust and/ or smoke. E. Damage caused by power surges, accidents, natural disasters or any other events or circumstances outside Hitachi’s
control. F. Any Product used in any manner inconsistent with the acceptable set-up, usage, safety or installation configurations identified in the
Product’s Operating Guide. G. Any Product used for purposes or applications, or subjected to operating conditions, other than those identified as
acceptable in the Product’s Operating Guide. H. Product repairs (including any product whose case has been opened), or part replacements
provided or installed, by any person other than an Authorized Hitachi Service Facility Representative. I. Improper uncrating, set-up or installation
or any misadjustments caused by user-operated controls. J. Any labor or costs associated with removing the Product from a custom cabinet or other
specialized product installation that impedes direct and immediate removal of the Product from the owner’s premises (must be arranged and paid
by the owner). K. Product cabinets, cabinet parts, knobs, batteries, accessories, or any third party's branded hardware or peripheral devices, including
any software incorporated therein, whether or not included within the Product's original packaging. L. Product screens that have been cleaned by any
method other than as specified in the Product’s Operating Guide. M. Normal usage, degraded brightness caused by backlight aging and/or cell
defects or ordinary wear and tear, including, without limitation, scratches or marks on the Product’s screen, cabinet or the appearance of bright or dark
screen pixels. N. Any Product returned for service that is damaged due to improper packaging, mishandling or shipping. (IMPORTANT: When
shipping any Product to a Hitachi Authorized Service Facility, Product owner must package it securely in the original shipping container or its
equivalent to prevent damage. The Product must be returned with the shipping charges prepaid and proof of purchases included in the shipping
container. Failure to properly package such product during such shipment will void all warranties.) O. Any Product purchased or serviced outside
the U.S.A., Canada and Puerto Rico. P. Any Product that has been used for commercial purposes.
NO PERSON, AGENT, DISTRIBUTOR, DEALER, SERVICE FACILITY, OR COMPANY IS AUTHORIZED TO CHANGE, MODIFY OR AMEND THE TERMS
OF THIS LIMITED WARRANTY IN ANY MANNER WHATSOEVER. EXCEPT AS PROVIDED IN THIS LIMITED WARRANTY, HITACHI MAKES NO
EXPRESS WARRANTY REGARDING THIS HITACHI PRODUCT. FURTHER, ALL IMPLIED WARRANTIES RELATING TO ANY PORTION OF THIS
PRODUCT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION
SPECIFIED UNDER THIS LIMITED WARRANTY. HITACHI SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY OTHER PERSON FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFIT OR PRODUCT RESULTING FROM ANY DEFECT IN, OR MALFUNCTION OR
FAILURE OF, THIS HITACHI PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS
LIMITED WARRANTY CONFERS SPECIFIC LEGAL RIGHTS, INCLUDING CERTAIN OTHER RIGHTS THAT MAY VARY DEPENDING ON YOUR
JURISDICTION. THIS LIMITED WARRANTY SHALL BE GOVERNED BY AND CONSTRUED IN ACCORDANCE WITH THE LAWS OF THE
JURISDICATION OF THE PRODUCT OWNER’S RESIDENCE.
EN 40
42
LIMITED WARRANTY for Roku Ready® Streaming Stick®
The License Agreement
The Roku and third-party software license terms can be found at: www.roku.com/license. Use of the Roku Ready Streaming Stick (“Streaming Stick”)
constitutes acceptance of as well as agreement to those license terms.
One (1) Year Limited Hardware Warranty
Subject to the additional terms and conditions set forth below, Roku provides this Limited Warranty:
• Only to the person or entity that originally purchased the Streaming Stick from Roku or from one of its authorized re-sellers or distributors; and
• Only for Streaming Sticks purchased and delivered to the end user within the United States and Canada.
Limited Warranty
Roku warrants the Streaming Stick hardware against defects in materials and workmanship under normal use for a period of one (1) year from the date
of purchase (“Warranty Period”). If Roku determines that the Streaming Stick’s hardware is defective, Roku will either repair the unit or replace the unit
with either a new or rebuilt Streaming Stick, at its option. If the Warranty Period has expired or is otherwise not applicable (see Scope and Limitation on
Warranty below), we will return the Streaming Stick to you. More information about this warranty can be found at www.roku.com/support. THE FOREGOING SETS FORTH ROKU’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY IN THE EVENT OF ANY BREACH OF THIS LIMITED WARRANTY.
Return and Warranty Service Process Please access and review the online help resources at www.roku.com/support before seeking warranty service.
To return or obtain warranty service for a Streaming Stick, you must first obtain a Return Merchandise Authorization (RMA) number from a Customer
Support Representative (CSR) at Roku. Customer Support contact information can be found by visiting www.roku.com/support. RMA numbers expire
thirty days from issuance. Roku may attempt to troubleshoot a warranty-related problem prior to issuing a RMA number. Please be prepared to provide
additional information upon request. Once a RMA number is obtained, you must ship your Streaming Stick, freight prepaid, together with proof of purchase and all accessories, in either the original packaging or packaging affording an equal degree of protection, to the Roku authorized distribution
facility identified by the CSR. Failure to return any of the accessories could result in a delay and/or result in an invoice to you or credit to Roku for the
missing accessories. Important: When emailing for a RMA number, please provide the following information with your request: (a) model number, (b)
serial number, (c) problem description, (d) software version (located in the System Configuration menu), (e) date of purchase, (f) place of purchase
(reseller or online place of purchase), and (g) return shipping address (P.O. boxes are not accepted). Scope of and Limitation on Warranty The warranty
on the Streaming Stick is limited to the repair or replacement of defective units as described in the Limited Warranty section above. This warranty does
not cover customer training or education, installation, set up adjustments, or signal reception problems. This warranty also does not cover any issue
related to the service provided by your Service Provider, including but not limited to service disruption, changes in service terms, changes in offerings,
changes in format, or technical problems. This warranty does not cover damage due to acts of God, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of, your Streaming Stick. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply or attempted repair by anyone other than a facility authorized by Roku to service your Streaming Stick. This warranty
does not cover consumables (such as fuses and batteries).
Legal Notices
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to
channels 1 through 11. Wireless Radio Use: This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.
IMPORTANT NOTE:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be collocated or
operating in conjunction with any other antenna or transmitter.
Note to US model owner:
To comply with US FCC regulation, the country selection function has been completely removed from all US models. The availability of some specific
channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. French
translation: Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement
est sujet aux deux conditions suivantes: (1) le dispositive ne doit pas produire de brouillage préjudiciable, et (2) ce dispositive doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Safety Precautions
The Streaming Stick has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for
causing fire, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines:
• Observe all warnings, precautions and instructions.
• Stop use, unplug the device that the Streaming Stick is inserted into from the electrical outlet and disconnect any other cables immediately if the
Streaming Stick or the device functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.
• For more information on product safety and troubleshooting, please go to www.roku.com/support.
Use and Handling
• When playing video games, use in a well-lit area and stand or sit as far away from the screen as possible.
• Take a 10-15 minute break every hour if playing video games and avoid prolonged use of the remote.
• Stop playing video games if you begin to feel tired or if you experience discomfort or pain in your hands or arms while operating the remote if the
condition persists, consult a doctor.
• If you experience any of the following health problems, discontinue use of the Streaming Stick immediately:
— Dizziness, nausea, fatigue or symptoms similar to motion sickness.
— Discomfort or pain in a part of the body, such as eyes, ears, hands, or arms. If symptoms persist, consult your physician.
• Keep the Streaming Stick and any accessories, including the remote, out of the reach of small children.
• Do not touch the Streaming Stick during an electrical storm.
• Do not allow liquid, small particles or other foreign objects to get into the Streaming Stick or accessories.
• Do not expose the Streaming Stick to smoke or steam.
• Do not expose the Streaming Stick or accessories to high, temperatures, high humidity or direct sunlight.
www.roku.com
Copyright © 2013 Roku, Inc. All rights reserved. Roku and the Roku logo are trademarks or registered trademarks of Roku, Inc.
43