Sony MDR-RF800RK Operating instructions

Sony MDR-RF800RK Operating instructions
2-684-424-11(1)
N Getting started
4
Connect the supplied AC power adaptor to
the transmitter.
Transmitter
Unpacking
Setting up the transmitter
1 Connect the transmitter to audio/video
4
equipment.
Check that you have the following items:
1 2
CHANNEL
• The headphones (1)
Turn on the switch on the left housing of
the headphones.
N Additional information
Check if the power indicator on the left housing
lights up red. Place the right housing (R) on your
right ear and the left housing (L) on your left ear.
Precautions
Select one of the hookups below depending on the
jack type:
INPUT CHARGE
Transmitter
DC IN 12V
To DC IN 12V jack
Wireless Stereo
Headphone System
OFF
CHG
To an AC
outlet
1 2
CHANNEL
5
INPUT CHARGE
DC IN 12V
AC power adaptor
(supplied)
• The transmitter (1)
Notes on headphones
To reduce the risk of hearing damage
To INPUT jack
5
Make sure to set the switch located on the
left housing to OFF/CHG. After that, connect
the CHARGE plug of the transmitter to jack
located on the left housing.
Connecting cord
(supplied)
Turn up the volume to a moderate level with the
VOLUME control on the left housing.
Transmitter
If the antenna cover come off from the transmitter,
put the cover back into the transmitter.
Unimatch plug cord
(supplied)
Headphones
CHARGE plug
CHG
OFF
CHG
Left channel
(white)
To headphones
jack (Stereo
mini jack), LINE
OUT or REC
OUT jacks
• AC power adaptor (1)
To LINE
OUT or
REC OUT
jacks
ON
When the transmitter’s POWER indicator
does not light up red
Check if the switch on the left housing of the
headphones is set to OFF/CHG. If the switch is set to
ON, the POWER indicator does not light up.
To recharge the headphone batteries after
use
• Rechargeable nickel-metal hydride batteries (2)
* “WALKMAN” and “WALKMAN” logo are
registered trademarks of Sony Coporation.
2
Connect the supplied AC power adaptor to
the transmitter.
Connect the headphones to the CHARGE plug of the
transmitter in the same manner as described in step 5
of “Charging the supplied rechargeable batteries”
after use. Since the built-in timer recognizes when
charging is complete, there is no need to remove the
headphones from the transmitter after charging.
Transmitter
1 2
CHANNEL
INPUT CHARGE
DC IN 12V
Printed in China
WARNING
Welcome!
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Thank you for purchasing the Sony MDR-RF800RK
Wireless Stereo Headphone System. Before operating
the unit, please read this manual thoroughly and
retain it for future reference.
Some features are:
• Wireless system that allows you to listen to a
program free from the restriction of a cord
• High fidelity sound reproduction
• 10 hours of continuous use with supplied
rechargeable battery.
• Easy connection with TV and HiFi Audio system
equipment
• Up to 100 meters reception range
• Volume control function on the headphones.
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the
apparatus.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Connect AC power adaptor to an easily accessible AC
outlet. Should you notice an abnormality in AC power
adaptor, disconnect it from the AC outlet
immediately.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Hereby, Sony Corp., declares that this equipment is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
For details, please access the following URL :
http://www.compliance.sony.de/
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural
resources. For more detailed information about
recycling of this product, please contact your local
Civic Office, your household waste disposal service or
the shop where you purchased the product.
Notes on receiving
performance
This system utilizes very high frequency signals in the
800 MHz band so the receiving performance may
deteriorate due to the surroundings. The following
examples illustrate conditions that may reduce the
reception range or cause interference.
• Inside a building with walls containing steel beams.
• An area with many steel file cabinets, etc.
• An area with many electrical appliances capable of
generating electromagnetic fields.
• The transmitter is placed on a metal instrument.
• An area facing a roadway.
• Noise or interfering signals exist in the surroundings
due to radio transceivers in trucks, etc.
• Noise or interfering signals exist in the surroundings
owing to wireless communication systems installed
along roadways.
Charging the supplied
rechargeable batteries
The supplied rechargeable nickel-metal hydride
batteries are not charged from the first time you use
them. Charge them before use.
To charge the batteries, connect the CHARGE plug of
the transmitter to the headphones.
1
Remove the battery compartment lid on the
left housing of the headphones.
There are tactile dots on the upper side of the lid
and the housing to check the position of the lid.
Press and turn the lid counter-clockwise with
your palm so that the dot on the lid aligns with
the left side dot of the housing.
Incline the headphones to drop the cover off the
housing.
Charging and usage hours
Approx. charging hours
1 hour
16 hours*2
Approx. usage time*1
30 minutes*3
10 hours*3
*1 at 1 kHz, 1 mW+1 mW output
*2 hours required to fully charge empty batteries
*3 Time stated above may vary, depending on the
temperature or conditions of use.
Using the headphones with dry batteries
(sold separately)
2
Insert the supplied rechargeable nickelmetal hydride batteries into the battery
compartment, matching the 3 terminals on
the batteries to the 3 marks in the
compartment.
Do not use rechargeable batteries other than the
supplied ones.
Commercially available (size AAA) dry batteries can
also be used to power the headphones. Install the
batteries in the same manner as described in steps 1
through 3 of “Charging the supplied rechargeable
batteries.”
When dry batteries are installed, the battery charge
function will not be activated.
Battery
Sony alkaline battery
LR03/AM-4(N)
To an AC
outlet
AC power adaptor
(supplied)
Notes
• Use only the supplied AC power adaptor. Do not
use any other AC power adaptor.
Polarity of the plug
• When the transmitter is placed on or near a TV, it
may pick up a noise. In such a case, place the
transmitter away from the TV.
• If the connected equipment has the AVLS
(Automatic Volume Limiter System) function, be
sure to turn the function off when using the
transmitter. Otherwise, you will have to turn up the
volume of the headphones, and that may cause
noise.
Press and turn the lid clockwise with your palm
so that the tactile dot on the lid matches to right
side dot of the housing.
Before listening
To reduce the risk of hearing damage, first lower the
volume.
2
• Do not charge a dry battery.
• Do not carry a dry battery together with coins or
other metallic objects. It can generate heat if the
positive and negative terminals of the battery
accidentally come into contact with metallic objects.
• If you are not going to use the unit for a long time,
remove the batteries to avoid damage from battery
leakage or corrosion.
Turn on the audio/video equipment
connected to the transmitter.
Notes
• When you use the headphones inside the effective
areas of the transmitter, the transmitter can be
placed in any direction from the listener.
• Even within the signal reception area, there are some
spots (dead spots) where the RF signal cannot be
received. This characteristics is inherent to RF
signals, and does not indicate malfunction. By
slightly moving the transmitter, location of the dead
spot can be changed.
1
Remove the old ear pad by pulling it out of
the groove on the housing.
No sound/Muffled sound
, Check the connection of the audio/video
equipment or the AC power adaptor.
, Check that the audio/video equipment is
turned on.
, Turn up the volume on the connected audio/
video equipment, if the transmitter is
connected to the headphones jack.
, Change the radio frequency with the
CHANNEL selector on the transmitter, then
select the same radio frequency with the switch
on the right housing of the headphones.
, The mute function is activated.
• Use the headphones near the transmitter.
, The headphones’ POWER indicator light turns
off, dims, flashes, or sound becomes distorted
or noisy.
• Charge the rechargeable battery if it is weak,
or replace alkaline batteries with new ones. If
the POWER indicator is still off after charging
the battery, take the headphones to a Sony
dealer.
Distortion
, If the transmitter is connected to the headphone
jack, turn down the volume on the connected
audio/video equipment.
, Change the radio frequency with the
CHANNEL selector on the transmitter and the
switch on the right housing of the headphones.
, The headphones’ POWER indicator light turns
off, dims, flashes, or sound becomes distorted
or noisy.
• Charge the rechargeable batteries if it is weak,
or replace alkaline batteries with new ones. If
the POWER indicator is still off after charging
the battery, take the headphones to a Sony
dealer.
Loud background noise
, Move closer to the transmitter. As you move
away from the transmitter, more noise is likely
to be heard.
, If the transmitter is connected to the
headphones jack, turn up the volume of the
connected audio/video equipment.
, Change the radio frequency with the
CHANNEL selector on the transmitter, then
select the same radio frequency with the switch
on the right housing of the headphones.
, The headphones’ POWER indicator light turns
off, dims, flashes, or sound becomes distorted
or noisy.
• Charge the rechargeable battery if it is weak,
or replace alkaline batteries with new ones. If
the POWER indicator is still off after charging
the battery, take the headphones to a Sony
dealer.
Specifications
The transmitter’s power indicator lights up green.
General
Transmitter
2
Headphones
Checking the remaining battery power
CHG
3
Troubleshooting
Disconnect the CHARGE plug from the
headphones.
CHARGE plug
Select the radio frequency with the
CHANNEL selector switch.
Place the new ear pad on the driver unit.
Hang the edge of the ear pad on one side of the
driver unit’s groove edge, then turn the edge of
ear pad around the driver unit as illustrated
below.
When the ear pad is securely inserted into the
groove, adjust the ear pad to the vertical position.
Carrier frequency
863.52 MHz, 864.52 MHz
Channel
Ch1, Ch2
Modulation
FM stereo
Frequency response
20 – 20,000 Hz
Transmitter TMR-RF800R
Power source DC 12 V: supplied AC power adaptor
Audio input Stereo mini jack
Dimensions
Approx. 105 × 135 × 105 mm
(4 1/4 × 5 3/8 × 4 1/4 in) (w/h/d)
Mass
Approx. 115 g (4.06 oz)
Rated power consumption
5W
Headphones MDR-RF800R
Note
The rechargeable nickel-metal hydride batteries
should be replaced with new ones when they last only
half the expected time after a proper recharging. The
rechargeable batteries type BP-HP550 are not
commercially available. You can order the batteries
from the store where you purchased this system, or at
your nearest Sony dealer.
The optimum distance is up to approximately 100 m
without the system picking up some interference.
However, the distance may vary depending on the
surroundings and environment. If the system picks up
some noise within the above mentioned distance,
reduce the distance between the transmitter unit and
the headphones, or select another channel.
If the transmitter is connected to the headphone
jack, set the volume control of the audio source
equipment as high as possible but not so high that
the audio signal becomes distorted.
28 hours*
Turn ON the switch located on the left housing of the
headphone, and check the POWER indicator located
on the left housing. The batteries are still serviceable
when the indicator lights up red.
Charge the rechargeable batteries or install new dry
batteries if the POWER indicator light dims, flashes, or
the sound becomes distorted or noisy.
The effective areas of
the transmitter
The ear pads are replaceable. If the ear pads become
dirty or worn out, replace them as illustrated below.
The ear pad is not commercially available. You can
order replacements from the store where you
purchased this system, or at your nearest Sony dealer.
Notes on Batteries
Close the battery compartment lid.
• If hiss is heard, move closer to the transmitter.
• You may hear some noise when you disconnect the
AC power adaptor from the transmitter before turn
off the headphones.
Listening to a programme
1
3
The transmitter starts sending RF signals
automatically when it detects an audio signal from the
connected equipment.
If it does not detect an audio signal for more than
about 4 minutes, the transmitter will stop sending RF
signals, and the POWER indicator will turn off.
When the transmitter receives an audio signal again, it
starts sending the RF signals, and the POWER
indicator will light up green again.
If the audio signal is very weak, the transmitter does
not send RF signals. If the transmitter is connected to a
headphone jack, make sure the volume of the
equipment connected is set to 5 - 6 or higher.
You may not hear the beginning of the sound from the
headphones until the transmitter starts sending the RF
signals after detecting an audio signal.
Replacing the ear pads
2
If you have any questions or problems concerning the
system that are not covered in this manual, please
consult your nearest Sony dealer.
Be sure to bring the headphones and the transmitter to
the Sony dealer when requiring repair work.
N Operating the system
Approx. hours*1
* at 1 kHz, 1 mW+1 mW output
*2 Time stated above may vary, depending on the
temperature or conditions of use.
2CH
To DC IN 12V jack
1
Battery life
1CH
Notes
Notes
• Do not connect the CHARGE plug to anything other
than these headphones.
• The transmitter automatically stops sending RF
signals while charging the batteries.
• This system is designed to charge only the supplied
rechargeable batteries type BP-HP550 for safety.
Note that other types of rechargeable batteries
cannot be charged with this system.
• If dry batteries are installed, they cannot be charged.
• Do not attempt to use the supplied BP-HP550
rechargeable batteries for other components. They
are for use with this system only.
• Charge in an environmental temperature of
between 0 °C and 40 °C (between 32 °F and 104 °F).
Caring for others
Sending RF signals from the transmitter
Stereo system,
VCR, etc.
WALKMAN*, TV,
etc.
VOLUME
Right
channel
(red)
• Unimatch plug cord (1) (stereo mini jack y phono
plugs)
• Connecting cord (1) (stereo mini plug y stereo
mini plug)
Avoid using headphones at high volume. Hearing
experts advise against continuous, loud and extended
play. If you experience a ringing in your ears, reduce
the volume or discontinue use.
Keep the volume at a moderate level. This will allow
you to hear outside sounds and to be considerate to
the people around you.
Note
© 2006 Sony Corporation
Select the channel to that of the transmitter
with the switch on the right housing of the
headphones.
POWER indicator located on the transmitter lights
up red. Charging will take about 16 hours, after
which the charging indicator will go off.
Operating Instructions
MDR-RF800RK
ON POWER
• If the transmitter is not to be used for a long period
of time, disconnect the AC power adaptor from the
AC outlet by holding the plug. Do not pull on the
cord.
• Do not leave the wireless stereo headphone system
in a location subject to direct sunlight, heat or
moisture.
1 2
CHANNEL
Power source Supplied rechargeable nickel-metal
hydride batteries BP-HP550 or
commercially available (size AAA) dry
batteries
Mass
Approx. 220 g (7.77 oz) incl. Batteries
Design and specifications are subject to change
without notice.
Svenska
Härmed intygar Sony Corp. att detta högtalarsystem
står i överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser
som framgår av direktiv 1999/5/EG.
Mer information finns på webbadressen:
http://www.compliance.sony.de/
Dansk
Undertegnede, Sony Corp., erklærer herved, at
følgende udstyr overholder de væsentlige krav og
øvrige relevante krav i direktiv 1999/5/EF.
Yderligere oplysninger findes på
http://www.compliance.sony.de/
Suomi
Sony Corp. vakuuttaa täten, että tämä laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Lisätietoja on seuraavassa Web-sivustossa:
http://www.compliance.sony.de/
Norsk
Herved erklærer Sony Corp.at dette utstyret er i
overensstemmelse med vesentlige krav og andre
relevante bestemmelser som fremgår av direktiv
1999/5/EC.
Gå til denne URL-en for mer informasjon:
http://www.compliance.sony.de/
Ελληνικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η Sony Corp. ∆ΗΛΩΝΕΙ ΟΤΙ H
ΣΥΣΚΕΥΗ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.
Για περισστερες λεπτοµέρειες, παρακαλούµε να
επισκεφθείτε την παρακάτω ηλεκτρονική
διεύθυνση (URL): http://www.compliance.sony.de/
Français
Par la présente, Sony Corp. déclare que cet appareil
est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Pour de plus amples informations, veuillez vous
reporter à l’URL suivante :
http://www.compliance.sony.de/
Deutsch
Hiermit erklärt die Sony Corporation, dass sich dieses
Gerät in Übereinstimmung mit den grundlegenden
Anforderungen und den anderen relevanten
Vorschriften der Richtlinie 1999/5/EG befindet.
Erläuterungen dazu finden Sie unter folgendem URL:
http://www.compliance.sony.de/
Español
Por medio de la presente, Sony Corp. declara que el
equipo cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles
de la Directiva 1999/5/CE.
Para obtener más información, visite la dirección URL
siguiente:
http://www.compliance.sony.de/
Nederlands
Hierbij verklaart Sony Corp. dat dit toestel in
overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
Ga naar de volgende URL voor meer informatie:
http://www.compliance.sony.de/
Italiano
Con la presente Sony Corp. dichiara che questo
apparecchio è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva
1999/5/CE.
Per ulteriori informazioni, accedere al seguente
indirizzo URL:
http://www.compliance.sony.de/
Português
A Sony Corp., declara que este equipamento está
conforme com os requisitos essenciais e outras
provisões da directiva 1999/5/CE.
Para saber mais pormenores, aceda ao seguinte URL :
http://www.compliance.sony.de/
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement