Motor-starter combinations

Motor-starter combinations
Motor-starter combinations
Combining a motor protective circuit breaker or circuit breaker with a contactor results in
a motor starter according to coordination type "1" or "2". Both types of coordination safely
control short-circuit by switching it off. Coordination type "2" starters offer a high degree
of operational continuity: after the cause of the short circuit has been removed, they can
be switched back on immediately.
Motor-starter combination - motor starter up to 1400 A
Highest safety through proven combination in coordination type "1" or "2" +++ Approved combinations
for export to North America
DOL starter and reversing starter MSC… – motor starter with motor-protective circuit-breaker
PKZM0 up to 32A
Mounted starters minimize wiring time +++ Plug & Play with starters on busbar adapters +++
Attractive design for high-quality installations +++ Direct field bus connection through SmartWireDarwin communication system via plug-in type protective module
DOL starter and reversing starter MSC-DE… – motor starter with electric motor-protective
circuit-breaker PKE up to 32A
Increased safety through separate contact systems between switching and safety devices +++ Direct
field bus connection through SmartWire-Darwin communication system via plug-in type protective
module +++ Direct reading of motor current and state, transfer to subordinate control system through
SmartWire-Darwin
Conditions for fulfilling type of coordination
Coordination type: "1": Secure switching off of the entered short-circuit current lq +++ No danger to personnel or installations in case of short-circuit +++ For further operation without repair and partial renewal, switch does not need to be suitable +++ Damage to the switch or individual components approved
Coordination type: "2": Secure switching off of the entered short-circuit current lq +++ No danger to personnel or installations in case of short-circuit +++ Switch remains suitable for further operation +++ No
damage to switch, except to welds of protective contacts, when these can be easily separated
without significant deformation
2010 CA08103002Z-EN www.eaton.com
Motor-starter combinations
Ordering
System overview, description
Connection system SmartWire Direct-on-line starters MSC-D
MSC-D complete units
8/02
MSC-US complete units
8/04
MSC-DEA complete units
8/06
Compact starters PKZ2/ZM
8/08
Modules PKZM0/PKZM4 + DILM
8/10
Modules NZMN/NZMH + DILM
8/14
Modules PKM0 + DILM + ZB
8/18
Modules NZMN + DILM + ZB/ZEV
8/18
Ordering
8/22
Modules NZMN/NZMH + DILM
8/24
180
Starter on busbar adapter
Reversing starters complete units MSC-R/BBA
8/28
Ordering
Starter for North America
DOL starters, modules PKZ2/S-SP + ZMR/ZM
8/30
Reversing starters, modules PKZ2/S-SP-FVR + ZMR/ZM
8/32
Modules type F starter combinations
8/34
Modules DILEM/DILM + ZE/ZB/Z5/ZW7
8/35
Modules NZMH-…-CNA + DILM + ZB/Z5/ZW7
8/36
Connection system SmartWire 8/41
DOL starters MSC-D, MSC-DE(A)
8/45
Reversing starter MSC-R
8/45
Direct-on-line starter MSC-D
67
Ordering
8/26
8/40
Dimensions
6
DOL starter complete units MSC-D/BBA
8/39
Technical data
46
8/20
8/38
Accessories
Connection system SmartWire Reversing starter MSC-R
Modules PKZM0/PKZM4 + DILM
Connection system SmartWire Engineering
Ordering
MSC-R complete units
8/37
95
45
MSC-D complete units
8/45
MSC-D/BBA complete units
8/45
MSC-DE(A) complete units
8/46
Reversing starter MSC-R
MSC-R complete units
8/46
MSC-R/BBA complete units
8/46
Connection system SmartWire 8/47
8/2
Motor-starter combinations
DOL starters
Complete units
MSC-D: PKZM0, DILM
HPL08002EN
DOL starters
Motor-starter combinations
8/3
Complete units
MSC-D: PKZM0, DILM
HPL08003EN
Ordering
DOL startersComplete units
Motor data
Motor rating
AC-3
Rated
operational
current
AC-3
Rated short-circuit current
380 - 415 V
380 - 415 V
Type “1”
coordination
Type “2”
coordination
Setting range
Motor starters
actuating voltage
230 V 50 Hz
Overload
trip
Part no.
Article no.
Short-circuit
release
380 V
400 V
415 V
P
400 V
Ie
Iq
Iq
Ir
Irm
kW
A
kA
kA
A
A
0.06
0.21
150
50
0.16 - 0.25
3.5
0.09
0.31
150
50
0.25 - 0.4
5.6
0.12
0.18
0.25
0.41
0.6
0.8
150
50
0.4 - 0.63
8.82
150
50
0.63 - 1
14
0.37
0.55
0.75
1.1
1.5
1.9
150
50
1 - 1.6
22.4
150
50
1.6 - 2.5
35
1.1
1.5
2.2
2.6
3.6
5
150
50
2.5 - 4
56
150
50
4 - 6.3
88.2
3
6.6
150
–
6.3 - 10
140
4
8.5
150
–
6.3 - 10
140
5.5
11.3
50
–
8 - 12
168
7.5
15.2
50
–
10 - 16
224
3
4
5.5
6.6
8.5
11.3
50
50
6.3 - 10
140
50
50
8 - 12
168
7.5
15.2
50
50
10 - 16
224
11
21.7
50
50
20 - 25
350
15
29.3
50
50
25 - 32
448
Motor starters
actuating voltage
24 V DC
Price
See price
list
Std.
pack
Part no.
Article no.
Std.
pack
Motor
protective
circuit breaker
Contactor
Price
See price
list
DOL starter wiring
set
Notes
Mechanical connection module
and electrical
contact module
I
Type
Type
Type
Complete units MSC-D
I
MSC-D-0.25-M7(230V50HZ)1)
281925
MSC-D-0.4-M7(230V50HZ)1)
281926
MSC-D-0.63-M7(230V50HZ)1)
281927
MSC-D-1-M7(230V50HZ)1)
281929
MSC-D-1.6-M7(230V50HZ)1)
283140
MSC-D-2.5-M7(230V50HZ)1)
283142
MSC-D-4-M7(230V50HZ)1)
283143
MSC-D-6.3-M7(230V50HZ)1)
283145
MSC-D-10-M7(230V50HZ)
283146
MSC-D-10-M9(230V50HZ)
283147
MSC-D-12-M12(230V50HZ)
283148
MSC-D-16-M15(230V50HZ)
100414
1 off
MSC-D-10-M17(230V50HZ)
101045
MSC-D-12-M17(230V50HZ)
101046
MSC-D-16-M17(230V50HZ)1)
283150
MSC-D-25-M25(230V50HZ)1)
283151
MSC-D-32-M32(230V50HZ)1)
283152
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
MSC-D-0.25-M7(24VDC)1)
283154
MSC-D-0.4-M7(24VDC)1)
283155
MSC-D-0.63-M7(24VDC)1)
283156
MSC-D-1-M7(24VDC)1)
283158
MSC-D-1.6-M7(24VDC)1)
283159
MSC-D-2.5-M7(24VDC)1)
283161
MSC-D-4-M7(24VDC)1)
283162
MSC-D-6.3-M7(24VDC)1)
283164
MSC-D-10-M7(24VDC)
283165
MSC-D-10-M9(24VDC)
283166
MSC-D-12-M12(24VDC)
283167
MSC-D-16-M15(24VDC)
100415
1 off
PKZM0-0,25
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-0,4
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-0,63
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-1
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-1,6
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-2,5
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-6,3
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-10
DILM7-10(...)
PKZM0-XDM12
1 off
PKZM0-10
DILM9-10(...)
PKZM0-XDM12
1 off
PKZM0-12
DILM12-10(...)
PKZM0-XDM12
1 off
PKZM0-16
DILM15-10(...)
PKZM0-XDM12
MSC-D-10-M17(24VDC)
101047
MSC-D-12-M17(24VDC)
101048
MSC-D-16-M17(24VDC)
283168
MSC-D-25-M25(24VDC)
283169
MSC-D-32-M32(24VDC)
283170
1 off
PKZM0-10
DILM17-10(...)
PKZM0-XDM32
1 off
PKZM0-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKZM0-16
DILM17-10(...)
PKZM0-XDM32
1 off
PKZM0-25
DILM25-10(...)
PKZM0-XDM32
1 off
PKZM0-32
DILM32-10(...)
PKZM0-XDM32
M
3~
1 off
1 off
1 off
1 off
The DOL starters (complete devices) consist of a
motor protective circuit breaker PKZM0 and a
contactor DILM.
With the adapterless top-hat rail mounting of starters
up to 15 A, only the motor-protective circuit-breaker
on the top-hat rail requires an adapter. The
contactors are provided with mechanical support
via a mechanical connection element.
Control wire guide with max. 6 conductors with up to
2.5 mm external diameter or 4 conductors up to
3.5 mm external diameter.
From 16 A, the motor protective circuit breaker and
contactors are mounted on the top-hat rail adapter
plate.
The connection of the main circuit between PKZ and
contactor is established with electrical contact
modules.
When using auxiliary contacts DILA‐XHIT…
(→ 5/40) the electrical plugs can be pulled without
having to remove the front mounting auxiliary
contact.
Cannot be combined with NHI-E-...-PKZ0-C standard
auxiliary contact with spring-loaded terminal.
Further information
Technical data PKZM0
Accessories PKZ
Technical data DILM
Further actuating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/54
1)
To assemble Type F starters that conform with
UL508, incoming terminals BK25/3-PKZ0-E and, if
necessary, three-phase terminal blocks B3.../...-PKZ0
can be added to motor starter combinations. Type F
starter → Page 8/34
I
M
3~
DOL startersComplete units 400/415 V
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/4
Motor-starter combinations
DOL starters
Complete units 400/415 V
MSC-DE: PKE, DILM
Motor data
HPL08004EN
Setting range
Rated
operational
power
AC-3
Rated
operational
current
AC-3
Rated shortcircuit
current
Overload
trip
Shortcircuit
release
Type of
coordination
380 V
400 V
415 V
P
400 V
380 - 415 V
Ie
Iq
Ir
Irm
kW
A
kA
A
A
0.06
0.21
100
0.3 - 1.2
16.8
"1"
0.09
0.31
100
0.3 - 1.2
16.8
"1"
0.12
0.41
100
0.3 - 1.2
16.8
"1"
0.18
0.6
100
0.3 - 1.2
16.8
"1"
0.25
0.8
100
0.3 - 1.2
16.8
"1"
0.37
1.1
100
0.3 - 1.2
16.8
"1"
0.55
1.5
100
1-4
56
"1"
0.75
1.9
100
1-4
56
"1"
1.1
2.6
100
1-4
56
"1"
1.5
3.6
100
1-4
56
"1"
2.2
5
100
3 - 12
168
"1"
3
6.6
100
3 - 12
168
"1"
4
8.5
100
3 - 12
168
"1"
5.5
11.3
100
3 - 12
168
"1"
2.2
5
100
3 - 12
168
"1", "2"
3
6.6
100
3 - 12
168
"1", "2"
4
8.5
100
3 - 12
168
"1", "2"
5.5
11.3
100
3 - 12
168
"1", "2"
7.5
16.7
100
8 - 32
448
"1", "2"
11
21.7
100
8 - 32
448
"1", "2"
15
29.3
100
8 - 32
448
"1", "2"
Motor starters
actuating voltage
230 V 50 Hz
Part no.
Article no.
Std.
pack
Price
See price
list
DOL starters
Motor-starter combinations
HPL08005EN
Motor starters
actuating voltage
24 V DC
Part no.
Article no.
8/5
Complete units 400/415 V
MSC-DE: PKE, DILM
Std.
pack
Motor
protective
circuit breaker
Contactor
Price
See price
list
DOL starter
wiring set
Notes
Mechanical connection module
and electrical
contact module
Type
Type
Type
1 off
PKE12/XTU-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-12
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-12
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-12
DILM9-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-12
DILM12-10(...)
PKZM0-XDM12
1 off
PKE12/XTU-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE12/XTU-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE12/XTU-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE12/XTU-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE32/XTU-32
DILM17-10(...)
PKZM0-XDM32
1 off
PKE32/XTU-32
DILM25-10(...)
PKZM0-XDM32
1 off
PKE32/XTU-32
DILM32-10(...)
PKZM0-XDM32
I
Complete units MSC-US
I
M
3~
MSC-DE-1.2-M7(230V50HZ)
121735
MSC-DE-1.2-M7(230V50HZ)
121735
MSC-DE-1.2-M7(230V50HZ)
121735
MSC-DE-1.2-M7(230V50HZ)
121735
MSC-DE-1.2-M7(230V50HZ)
121735
MSC-DE-1.2-M7(230V50HZ)
121735
MSC-DE-4-M7(230V50HZ)
121737
MSC-DE-4-M7(230V50HZ)
121737
MSC-DE-4-M7(230V50HZ)
121737
MSC-DE-4-M7(230V50HZ)
121737
MSC-DE-12-M7(230V50HZ)
121739
MSC-DE-12-M7(230V50HZ)
121739
MSC-DE-12-M9(230V50HZ)
121741
MSC-DE-12-M12(230V50HZ)
121743
MSC-DE-12-M17(230V50HZ)
121745
MSC-DE-12-M17(230V50HZ)
121745
MSC-DE-12-M17(230V50HZ)
121745
MSC-DE-12-M17(230V50HZ)
121745
MSC-DE-32-M17(230V50HZ)
121747
MSC-DE-32-M25(230V50HZ)
121749
MSC-DE-32-M32(230V50HZ)
121751
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
MSC-DE-1.2-M7(24VDC)
121736
MSC-DE-1.2-M7(24VDC)
121736
MSC-DE-1.2-M7(24VDC)
121736
MSC-DE-1.2-M7(24VDC)
121736
MSC-DE-1.2-M7(24VDC)
121736
MSC-DE-1.2-M7(24VDC)
121736
MSC-DE-4-M7(24VDC)
121738
MSC-DE-4-M7(24VDC)
121738
MSC-DE-4-M7(24VDC)
121738
MSC-DE-4-M7(24VDC)
121738
MSC-DE-12-M7(24VDC)
121740
MSC-DE-12-M7(24VDC)
121740
MSC-DE-12-M9(24VDC)
121742
MSC-DE-12-M12(24VDC)
121744
MSC-DE-12-M17(24VDC)
121746
MSC-DE-12-M17(24VDC)
121746
MSC-DE-12-M17(24VDC)
121746
MSC-DE-12-M17(24VDC)
121746
MSC-DE-32-M17(24VDC)
121748
MSC-DE-32-M25(24VDC)
121750
MSC-DE-32-M32(24VDC)
121752
The DOL starters (complete devices) consist of a PKE
motor protective circuit breaker and a DILM contactor.
With the adapterless top-hat rail mounting of starters
up to 15 A, only the motor protective circuit breaker on
the top-hat rail requires an adapter.
The contactors are provided with mechanical support
via a mechanical connection element.
Control wire guide with max. 6 conductors with up to
2.5 mm external diameter or 4 conductors up to 3.5 mm
external diameter.
From 16 A, the motor protective circuit breaker and
contactor are mounted on the top-hat rail adapter
plate.
The connection of the main circuit between PKE and
contactor is established with electrical contact
modules.
When using auxiliary contacts DILA‐XHIT…
(→ 5/40) the electrical plugs can be pulled without
having to remove the front mounting auxiliary contact.
Cannot be combined with standard auxiliary contact
NHI-E-...-PKZ0-C with spring-loaded terminals.
Further information
Technical data PKE
Accessories PKE
Technical data DILM
Further actuating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/54
I
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/6
Motor-starter combinations
DOL starters
Complete units 400/415 V
MSC-DEA: PKE, DILM
HPL08006EN
DOL starters
Motor-starter combinations
8/7
Complete units 400/415 V
MSC-DEA: PKE, DILM
HPL08007EN
DOL startersComplete units 400/415 V
Motor data
Setting range
Rated operational
power
AC-3
Rated operational
current
AC-3
Rated short-circuit
current
Overload trip
Short-circuit release
Type of coordination
380 V
400 V
415 V
P
400 V
380 - 415 V
Ie
Iq
Ir
Irm
kW
A
kA
A
A
0.06
0.21
100
0.3 - 1.2
16.8
"1"
0.09
0.31
100
0.3 - 1.2
16.8
"1"
0.12
0.41
100
0.3 - 1.2
16.8
"1"
0.18
0.6
100
0.3 - 1.2
16.8
"1"
0.25
0.8
100
0.3 - 1.2
16.8
"1"
0.37
1.1
100
0.3 - 1.2
16.8
"1"
0.55
1.5
100
1-4
56
"1"
0.75
1.9
100
1-4
56
"1"
1.1
2.6
100
1-4
56
"1"
1.5
3.6
100
1-4
56
"1"
2.2
5
100
3 - 12
168
"1"
3
6.6
100
3 - 12
168
"1"
4
8.5
100
3 - 12
168
"1"
5.5
11.3
100
3 - 12
168
"1"
2.2
5
100
3 - 12
168
"1", "2"
3
6.6
100
3 - 12
168
"1", "2"
4
8.5
100
3 - 12
168
"1", "2"
5.5
11.3
100
3 - 12
168
"1", "2"
7.5
16.7
100
8 - 32
448
"1", "2"
11
21.7
100
8 - 32
448
"1", "2"
15
29.3
100
8 - 32
448
"1", "2"
Motor starters
actuating voltage
24 V DC
Part no.
Article no.
Std.
pack
Motor
protective
circuit breaker
Contactor
Price
See price
list
DOL starter
wiring set
Notes
Mechanical connection module
and electrical
contact module
Type
Type
Type
1 off
PKE12/XTUA-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-1.2
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-4
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-12
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-12
DILM7-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-12
DILM9-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-12
DILM12-10(...)
PKZM0-XDM12
1 off
PKE12/XTUA-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE12/XTUA-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE12/XTUA-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE12/XTUA-12
DILM17-10(...)
PKZM0-XDM32
1 off
PKE32/XTUA-32
DILM17-10(...)
PKZM0-XDM32
1 off
PKE32/XTUA-32
DILM25-10(...)
PKZM0-XDM32
1 off
PKE32/XTUA-32
DILM32-10(...)
PKZM0-XDM32
I
Complete devices MSD-DEA
I
M
3~
MSC-DEA-1.2-M7(24VDC)
121753
MSC-DEA-1.2-M7(24VDC)
121753
MSC-DEA-1.2-M7(24VDC)
121753
MSC-DEA-1.2-M7(24VDC)
121753
MSC-DEA-1.2-M7(24VDC)
121753
MSC-DEA-1.2-M7(24VDC)
121753
MSC-DEA-4-M7(24VDC)
121754
MSC-DEA-4-M7(24VDC)
121754
MSC-DEA-4-M7(24VDC)
121754
MSC-DEA-4-M7(24VDC)
121754
MSC-DEA-12-M7(24VDC)
121755
MSC-DEA-12-M7(24VDC)
121755
MSC-DEA-12-M9(24VDC)
121756
MSC-DEA-12-M12(24VDC)
121757
MSC-DEA-12-M17(24VDC)
121758
MSC-DEA-12-M17(24VDC)
121758
MSC-DEA-12-M17(24VDC)
121758
MSC-DEA-12-M17(24VDC)
121758
MSC-DEA-32-M17(24VDC)
121759
MSC-DEA-32-M25(24VDC)
121760
MSC-DEA-32-M32(24VDC)
121761
The DOL starters (complete devices) consist of a PKE
motor protective circuit breaker and a DILM
contactor.
With the adapterless top-hat rail mounting of starters
up to 15 A, only the motor protective circuit breaker on
the top-hat rail requires an adapter.
The contactors are provided with mechanical support
via a mechanical connection element.
Control wire guide with max. 6 conductors with up to
2.5 mm external diameter or 4 conductors up to 3.5 mm
external diameter.
From 16 A, the motor protective circuit breaker and
contactor are mounted on the top-hat rail adapter
plate.
The connection of the main circuit between PKE and
contactor is established with electrical contact
modules.
When using auxiliary contacts DILA‐XHIT…
(→ 5/40) the electrical plugs can be pulled without
having to remove the front mounting auxiliary contact.
Cannot be combined with standard auxiliary contact
NHI-E-...-PKZ0-C with spring-loaded terminals.
The DOL starters MSC-DEA... are prepared for
communication via SmartWire-Darwin. For this the
SWD-PKE communication must be added.
Further information
Technical data PKE
Accessories PKE
Technical data DILM
Further actuating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/54
I
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/8
Motor-starter combinations
DOL starters
Compact starters, high-capacity compact starters
PKZ2/ZM.../S...
HPL08008EN
DOL starters
Motor-starter combinations
8/9
Compact starters, high-capacity compact starters
PKZ2/ZM.../S...
HPL08009EN
DOL startersCompact starters, high-capacity compact starters
Motor data
Notes
Setting range
Rated operational
power
AC-3
Rated operational current
Rated short-circuit current
Overload
trip
Short-circuit release
380 V
400 V
415 V
P
500 V
400 V
500 V
380 - 415 V
500 V
P
Ie
Ie
Iq
kW
kW
A
A
kA
Iq
Ir
Irm
kA
A
A
0.18
0.25
0.37
0.55
0.75
0.25
0.37
0.55
0.75
1.1
0.8
0.6
0.9
1.2
1.5
2.1
100
100
0.6 - 1
8 - 14
100
100
1 - 1.6
14 - 22
100
100
1.6 - 2.4
20 - 35
1.1
1.5
2.2
1.5
2.9
100
100
2.4 - 4
35 - 55
4
5.3
6.8
9
12.1
100
100
4-6
50 - 80
100
7
6 - 10
80 - 140
100
7
10 - 16
130 - 220
30
7
16 - 25
200 - 350
29.3
17.4
23.4
28.9
30
7
24 - 32
275 - 425
Type of
coordination
Part no.
Article no.
Price
See price list
"1"
PKZ2/ZM-1/SE1A/11(230V50HZ,240V60HZ
063364
PKZ2/ZM-1.6/SE1A/11(230V50HZ,240V60
063372
PKZ2/ZM-2.4/SE1A/11(230V50HZ,240V60
063382
PKZ2/ZM-4/SE1A/11(230V50HZ,240V60HZ
063392
PKZ2/ZM-6/SE1A/11(230V50HZ,240V60HZ
063402
PKZ2/ZM-10/SE1A/11(230V50HZ,240V60)
063412
PKZ2/ZM-16/SE1A/11(230V50HZ,240V60)
063422
PKZ2/ZM-25/SE1A/11(230V50HZ,240V60)
063432
PKZ2/ZM-32/SE1A/11(230V50HZ,240V60)
063442
PKZ2/ZM-40/SE1A/11(230V50HZ,240V60)
063452
1 off
The compact starters consist of a motor protective circuit breaker,
which features a plug-in trip block and an attached contact module
with matching profile. The devices are prefitted to a clip plate and can
be snap fitted as a unit, centrally onto one or two IEC/EN 60715 top-hat
rails.
They conform with IEC/EN 60947-4-1 or VDE 0660 Part 102.
Iq = rated conditional short-circuit current
"2"
PKZ2/ZM-1/S(230V50HZ,240V60HZ)
063472
PKZ2/ZM-1.6/S(230V50HZ,240V60HZ)
063482
PKZ2/ZM-2.4/S(230V50HZ,240V60HZ)
063492
PKZ2/ZM-4/S(230V50HZ,240V60HZ)
063502
PKZ2/ZM-6/S(230V50HZ,240V60HZ)
063512
PKZ2/ZM-10/S(230V50HZ,240V60HZ)
063522
PKZ2/ZM-16/S(230V50HZ,240V60HZ)
063532
PKZ2/ZM-25/S(230V50HZ,240V60HZ)
063542
PKZ2/ZM-32/S(230V50HZ,240V60HZ)
063552
PKZ2/ZM-40/S(230V50HZ,240V60HZ)
063562
1 off
The high-capacity compact starters consist of a motor protective
circuit breaker and an attached contact module with matching profile.
The devices are prefitted to a clip plate and can be snap fitted as a unit,
centrally onto one or two IEC/EN 60715 top-hat rails.
They conform with IEC/EN 60947-4-1 or VDE 0660 Part 102.
Iq = rated conditional short-circuit current
Std. pack
AC-3
I
Compact starter PKZ2
M
3~
3
4
5.5
7.5
11
2.2
3
4
5.5
7.5
1.1
1.5
1.9
2.65
3.6
5
6.6
8.5
11.3
15.2
21.7
15
11
15
18.5
18.5
22
36
33
30
7
32 - 40
350 - 500
0.18
0.25
0.37
0.55
0.75
0.25
0.37
0.55
0.75
1.1
0.8
0.6
0.9
1.2
1.5
2.1
100
100
0.6 - 1
8 - 14
100
100
1 - 1.6
14 - 22
100
100
1.6 - 2.4
20 - 35
1.1
1.5
2.2
1.5
2.9
100
100
2.4 - 4
35 - 55
4
5.3
6.8
9
12.1
100
100
4-6
50 - 80
100
100
6 - 10
80 - 140
100
100
10 - 16
130 - 220
100
100
16 - 25
200 - 350
29.3
17.4
23.4
28.9
100
100
24 - 32
275 - 425
36
33
100
100
32 - 40
350 - 500
High-capacity compact starter PKZ2
M
3~
2010 CA08103002Z-EN
3
4
5.5
7.5
11
2.2
3
4
5.5
7.5
15
11
15
18.5
18.5
22
www.eaton.com
1.1
1.5
1.9
2.6
3.6
5
6.6
11.3
15.2
21.7
2010 CA08103002Z-EN
www.eaton.com
8/10
Motor-starter combinations
DOL starters
Modules
PKZM, DILM
HPL08010EN
DOL starters
Motor-starter combinations
8/11
Modules
PKZM, DILM
HPL08011EN
DOL startersModules
Motor data
Setting range
Overload trip
Motor protective
circuit breaker
Contactor
Contactor
Type “1”
coordination
Type “2”
coordination
Type
Type
Type
Rated operational power
Rated operational current
Rated short-circuit current
Short-circuit release
AC-3
AC-3
380 - 415 V
380 - 415 V
380 V
400 V
415 V
P
400 V
Type “1”
coordination
Type “2”
coordination
Ie
Iq
Iq
Ir
Irm
kW
A
kA
kA
A
A
0.06
0.21
150
50
0.16 - 0.25
3.5
PKZM0-0,25
DILM7-…(…)
DILM7-…(…)
0.09
0.31
150
50
0.25 - 0.4
5.6
PKZM0-0,4
DILM7-…(…)
DILM7-…(…)
0.12
0.41
150
50
0.4 - 0.63
8.82
PKZM0-0,63
DILM7-…(…)
DILM7-…(…)
0.18
0.6
150
50
0.4 - 0.63
8.82
PKZM0-0,63
DILM7-…(…)
DILM7-…(…)
0.25
0.8
150
50
0.63 - 1
14
PKZM0-1
DILM7-…(…)
DILM7-…(…)
0.37
1.1
150
50
1 - 1.6
22.4
PKZM0-1,6
DILM7-…(…)
DILM7-…(…)
0.55
1.5
150
50
1 - 1.6
22.4
PKZM0-1,6
DILM7-…(…)
DILM7-…(…)
0.75
1.9
150
50
1.6 - 2.5
35
PKZM0-2,5
DILM7-…(…)
DILM7-…(…)
1.1
2.6
150
50
2.5 - 4
56
PKZM0-4
DILM7-…(…)
DILM7-…(…)
1.5
3.6
150
50
2.5 - 4
56
PKZM0-4
DILM7-…(…)
DILM7-…(…)
2.2
5
150
50
4 - 6.3
88.2
PKZM0-6,3
DILM7-…(…)
DILM7-…(…)
3
6.6
150
50
6.3 - 10
140
PKZM0-10
DILM7-…(…)
DILM17-…(…)
4
8.5
150
50
6.3 - 10
140
PKZM0-10
DILM9-…(…)
DILM17-…(…)
5.5
11.3
50
50
8 - 12
168
PKZM0-12
DILM12-…(…)
DILM17-…(…)
7.5
15.2
50
50
10 - 16
224
PKZM0-16
DILM15-…(…)
DILM17-…(…)
11
21.7
50
50
20 - 25
350
PKZM0-25
DILM25-…(…)
DILM25-…(…)
15
29.3
50
50
25 - 32
448
PKZM0-32
DILM32-…(…)
DILM32-…(…)
5.5
11.3
50
50
10 - 16
224
PKZM4-16
DILM17-…(…)
DILM17-…(…)
7.5
15.2
50
50
10 - 16
224
PKZM4-16
DILM17-…(…)
DILM17-…(…)
11
21.7
50
50
20 - 25
350
PKZM4-25
DILM25-…(…)
DILM25-…(…)
15
29.3
50
50
25 - 32
448
PKZM4-32
DILM32-…(…)
DILM32-…(…)
18.5
36
50
50
32 - 40
560
PKZM4-40
DILM40(…)
DILM40(…)
22
41
50
50
40 - 50
700
PKZM4-50
DILM50(…)
DILM50(…)
30
55
50
50
50 - 58
812
PKZM4-58
DILM65(…)
DILM65(…)
34
63
50
50
55 - 65
882
PKZM4-63
DILM65(…)
DILM65(…)
Notes
I
Modules PKZM0 and DILM
The motor-starter combinations consist of the motor protective circuit breaker
or a circuit breaker and a contactor. They conform with IEC/EN 60947-4-1 or
VDE 0660 Part 102.
Iq = conditional rated current
Further information
Technical data PKZM0
Accessories PKZ
Technical data DILM
Further actuating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/54
M
3~
Modules PKZM4 and DILM
The motor-starter combinations consist of the motor protective circuit breaker
or a circuit breaker and a contactor. They conform with IEC/EN 60947-4-1 or
VDE 0660 Part 102.
Iq = conditional rated current
Further information
Technical data PKZM4
Accessories PKZ
Technical data DILM
Further actuating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/74
→ 5/54
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/12
Motor-starter combinations
DOL starters
Modules
PKZM, DILM
HPL08012EN
DOL starters
Motor-starter combinations
8/13
Modules
PKZM, DILM
HPL08013EN
DOL startersModules
Motor data
Setting range
Rated short-circuit current
Overload trip
Notes
Rated operational
power
AC-3
Rated operational
current
AC-3
Short-circuit release
500 V
500 V
500 V
500 V
Type “1” coordination
Type “2” coordination
P
Ie
Iq
Iq
Ir
Irm
kW
A
kA
kA
A
A
Motor protective circuit
breaker
Contactor
Contactor
Current limiter
Type “1” coordination
Type “2” coordination
Type
Type
Type
Type
I
Modules PKZM0 and DILM
M
3~
0.06
0.17
100
50
0.16 - 0.25
3.5
PKZM0-0,25
DILM7-…(…)
DILM7-…(…)
–
0.09
0.25
100
50
0.25 - 0.4
5.6
PKZM0-0,4
DILM7-…(…)
DILM7-…(…)
–
0.12
0.33
100
50
0.25 - 0.4
5.6
PKZM0-0,4
DILM7-…(…)
DILM7-…(…)
–
0.18
0.48
100
50
0.4 - 0.63
8.8
PKZM0-0,63
DILM7-…(…)
DILM7-…(…)
–
0.25
0.7
100
50
0.63 - 1
14
PKZM0-1
DILM7-…(…)
DILM7-…(…)
–
0.37
0.9
100
50
0.63 - 1
14
PKZM0-1
DILM7-…(…)
DILM7-…(…)
–
0.55
1.2
100
50
1 - 1.6
22
PKZM0-1,6
DILM7-…(…)
DILM7-…(…)
–
0.75
1.5
100
50
1 - 1.6
22
PKZM0-1,6
DILM7-…(…)
DILM7-…(…)
–
1.1
2.1
100
50
1.6 - 2.5
35
PKZM0-2,5
DILM7-…(…)
DILM17-…(…)
–
1.5
2.9
100
50
2.5 - 4
56
PKZM0-4
DILM7-…(…)
DILM17-…(…)
–
2.2
4
42
18
4 - 6.3
88
PKZM0-6,3
DILM7-…(…)
DILM17-…(…)
–
2.2
4
–
50
4 - 6.3
88
PKZM0-6,3
–
DILM17-…(…)
CL-PKZ0
3
5.3
42
18
4 - 6.3
88
PKZM0-6,3
DILM7-…(…)
DILM17-…(…)
–
3
5.3
–
50
4 - 6.3
88
PKZM0-6,3
–
DILM17-…(…)
CL-PKZ0
4
6.8
42
18
6.3 - 10
140
PKZM0-10
DILM9-…(…)
DILM17-…(…)
–
4
6.8
–
50
6.3 - 10
140
PKZM0-10
–
DILM17-…(…)
CL-PKZ0
5.5
9
42
18
6.3 - 10
140
PKZM0-10
DILM9-…(…)
DILM17-…(…)
–
5.5
9
–
50
6.3 - 10
140
PKZM0-10
–
DILM17-…(…)
CL-PKZ0
6.5
10.6
42
18
8 - 12
168
PKZM0-12
DILM12-…(…)
DILM17-…(…)
–
6.5
10.6
–
50
8 - 12
168
PKZM0-12
–
DILM17-…(…)
CL-PKZ0
7.5
12.1
15
18
10 - 16
224
PKZM0-16
DILM17-…(…)
DILM17-…(…)
–
7.5
12.1
–
50
10 - 16
224
PKZM0-16
–
DILM17-…(…)
CL-PKZ0
11
17.4
6
–
16 - 20
280
PKZM0-20
DILM25-…(…)
–
–
11
17.4
15
–
16 - 20
280
PKZM0-20
DILM25-…(…)
–
CL-PKZ0
15
23.4
6
–
20 - 25
350
PKZM0-25
DILM25-…(…)
–
–
15
23.4
15
–
20 - 25
350
PKZM0-25
DILM25-…(…)
–
CL-PKZ0
18.5
28.9
6
–
25 - 32
448
PKZM0-32
DILM32-…(…)
–
–
18.5
28.9
15
–
25 - 32
448
PKZM0-32
DILM32-…(…)
–
CL-PKZ0
11
17.4
50
50
16 - 25
350
PKZM4-25
DILM40(…)
DILM40(…)
–
15
23.4
50
50
16 - 25
350
PKZM4-25
DILM40(…)
DILM40(…)
–
The motor-starter combinations consist of the motor protective
circuit breaker or a circuit breaker and a contactor.
They conform with IEC/EN 60947-4-1 or VDE 0660 Part 102.
Iq = rated conditional short-circuit current.
Further information
Technical data PKZM...
PKZM accessories...
Technical data DILM
Further actuating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/56
Modules PKZM4 and DILM
18.5
28.9
50
50
25 - 32
448
PKZM4-32
DILM40(…)
DILM40(…)
–
22
33
50
50
32 - 40
560
PKZM4-40
DILM40(…)
DILM40(…)
–
30
44
50
50
40 - 50
700
PKZM4-50
DILM50(…)
DILM50(…)
–
37
54
50
50
50 - 58
812
PKZM4-58
DILM65(…)
DILM65(…)
–
45
65
50
50
55 - 65
882
PKZM4-63
DILM65(…)
DILM65(…)
–
The motor-starter combinations consist of the motor protective
circuit breaker or a circuit breaker and a contactor.
They conform with IEC/EN 60947-4-1 or VDE 0660 Part 102.
Iq = rated conditional short-circuit current.
Further information
Technical data PKZM...
PKZM accessories...
Technical data DILM
Further actuating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/75
→ 5/56
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/14
Motor-starter combinations
DOL starters
Modules
NZMN, NZMH, DILM
HPL08014EN
DOL starters
Motor-starter combinations
8/15
Modules
NZMN, NZMH, DILM
HPL08015EN
DOL startersModules
Motor data
Rated operational power
Setting range
Rated operational current
Rated short-circuit current
Overload trip
Notes
Short-circuit release
AC-3
AC-3
380 V
400 V
415 V
P
400 V
Ie
Iq
Ir
Irm
kW
A
kA
A
A
Circuit-breaker
Contactor
Contactor
Type “1” coordination
Type “2” coordination
Type
Type
Type
400/415 V
I
Modules NZMN and DILM
18.5
36
50
32 - 40
320 - 560
NZMN1-M40
DILM40(…)
DILM80(…)
22
41
50
40 - 50
400 - 700
NZMN1-M50
DILM50(…)
DILM80(…)
30
55
50
50 - 63
504 - 882
NZMN1-M63
DILM65(…)
DILM80(…)
37
68
50
63 - 80
640 - 1120
NZMN1-M80
DILM80(…)
DILM80(…)
45
81
50
80 - 100
800 - 1250
NZMN1-M100
DILM95(…)
DILM95(…)
55
99
50
80 - 100
800 - 1250
NZMN1-M100
DILM115(…)
DILM115(…)
75
134
50
125 - 160
1280 - 2240
NZMN2-M160
DILM150(…)
DILM150(…)
90
161
50
160 - 200
1600 - 2500
NZMN2-M200
DILM185A/22(…)
DILM185A/22(…)
110
196
50
160 - 200
1600 - 2500
NZMN2-M200
DILM225A/22(…)
DILM225A/22(…)
132
231
50
175 - 350
350 - 4900
NZMN3-ME350
DILM250/22(…)
DILM250/22(…)
160
279
50
175 - 350
350 - 4900
NZMN3-ME350
DILM300A/22(…)
DILM300A/22(…)
200
349
50
175 - 350
350 - 4900
NZMN3-ME350
DILM400/22(…)
DILM400/22(…)
250
437
50
225 - 450
450 - 6300
NZMN3-ME450
DILM500/22(…)
DILM500/22(…)
315
544
50
275 - 550
550 - 7700
NZMN4-ME550
DILM580/22(…)
–
400
683
50
438 - 875
875 - 12250
NZMN4-ME875
DILM650/22(…)
–
450
750
50
438 - 875
875 - 12250
NZMN4-ME875
DILM750/22(…)
–
500
820
50
438 - 875
875 - 12250
NZMN4-ME875
DILM820/22(…)
–
560
947
50
700 - 1400
1400 - 19600
NZMN4-ME1400
DILM1000/22(…)
–
The motor-starter combinations consist of the motor protective circuit breaker
or a circuit breaker and a contactor. They conform with IEC/EN 60947-4-1 or
VDE 0660 Part 102.
Iq = conditional rated current
M
3~
Modules NZMH and DILM
22
41
100
40 - 50
400 - 700
NZMH2-M50
DILM80(…)
DILM80(…)
30
55
100
50 - 63
504 - 882
NZMH2-M63
DILM80(…)
DILM80(…)
37
68
100
63 - 80
640 - 1120
NZMH2-M80
DILM80(…)
DILM80(…)
45
81
100
80 - 100
800 - 1250
NZMH2-M100
DILM95(…)
DILM95(…)
55
100
100
100 - 125
1000 - 1750
NZMH2-M125
DILM115(…)
DILM115(…)
75
134
100
125 - 160
1280 - 2240
NZMH2-M160
DILM150(…)
DILM150(…)
30
55
100
45 - 90
90 - 1260
NZMH2-ME90
DILM80(…)
DILM80(…)
37
68
100
45 - 90
90 - 1260
NZMH2-ME90
DILM80(…)
DILM80(…)
45
81
100
45 - 90
90 - 1260
NZMH2-ME90
DILM95(…)
DILM95(…)
55
100
100
70 - 140
140 - 1960
NZMH2-ME140
DILM115(…)
DILM115(…)
75
134
100
70 - 140
140 - 1960
NZMH2-ME140
DILM150(…)
DILM150(…)
90
161
100
110 - 120
220 - 3080
NZMH2-ME220
DILM185A/22(…)
DILM185A/22(…)
110
196
100
110 - 120
220 - 3080
NZMH2-ME220
DILM225A/22(…)
DILM225A/22(…)
132
231
100
175 - 350
350 - 4900
NZMH3-ME350
DILM250/22(…)
DILM250/22(…)
160
279
100
175 - 350
350 - 4900
NZMH3-ME350
DILM300A/22(…)
DILM300A/22(…)
200
349
100
175 - 350
350 - 4900
NZMH3-ME350
DILM400/22(…)
DILM400/22(…)
The motor-starter combinations consist of the motor protective circuit breaker
or a circuit breaker and a contactor. They conform with IEC/EN 60947-4-1 or
VDE 0660 Part 102.
Iq = conditional rated current
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/16
Motor-starter combinations
DOL starters
Modules
NZMH, DILM
HPL08016EN
Motor data
DOL starters
Motor-starter combinations
HPL08017EN
Setting range
Notes
Rated operational
power
AC-3
Rated operational current
Rated short-circuit current
500 V
525 V
P
500 V
500/525 V
Ie
Ie
Iq
Ir
Irm
kW
A
A
kA
A
A
525 V
Overload trip
8/17
Modules
NZMH, DILM
Short-circuit release
I
Circuit-breaker
Contactor
Contactor
Type “1” coordination
Type “2” coordination
Type
Type
Type
Modules NZMH and DILM
11
17.4
17
50
16 - 20
350 - 350
NZMH2-M20
DILM40(…)
DILM80(…)
15
23.4
22.5
50
20 - 25
350 - 350
NZMH2-M25
DILM40(…)
DILM80(…)
18.5
28.9
28
50
25 - 32
320 - 448
NZMH2-M32
DILM40(…)
DILM80(…)
22
33
32
50
32 - 40
320 - 560
NZMH2-M40
DILM40(…)
DILM80(…)
30
44
43
50
40 - 50
400 - 700
NZMH2-M50
DILM80(…)
DILM80(…)
37
54
54
50
50 - 63
504 - 882
NZMH2-M63
DILM80(…)
DILM80(…)
45
65
64
50
63 - 80
640 - 1120
NZMH2-M80
DILM80(…)
DILM80(…)
55
79
78
50
63 - 80
640 - 1120
NZMH2-M80
DILM80(…)
DILM80(…)
75
107
106
50
100 - 125
1000 - 1750
NZMH2-M125
DILM115(…)
DILM115(…)
90
129
127
50
125 - 160
1280 - 2240
NZMH2-M160
DILM150(…)
DILM150(…)
30
44
43
50
45 - 90
90 - 1260
NZMH2-ME90
DILM80(…)
DILM80(…)
37
54
54
50
45 - 90
90 - 1260
NZMH2-ME90
DILM80(…)
DILM80(…)
45
65
64
50
45 - 90
90 - 1260
NZMH2-ME90
DILM80(…)
DILM80(…)
55
79
78
50
45 - 90
90 - 1260
NZMH2-ME90
DILM80(…)
DILM80(…)
75
107
106
50
70 - 140
140 - 1960
NZMH2-ME140
DILM115(…)
DILM115(…)
90
129
127
50
70 - 140
140 - 1960
NZMH2-ME140
DILM150(…)
DILM150(…)
The motor-starter combinations consist of the motor protective circuit breaker or
a circuit breaker and a contactor. They conform with IEC/EN 60947-4-1 or
VDE 0660 Part 102.
Iq = conditional rated current
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/18
Motor-starter combinations
DOL starters
Modules
PKZM0, DILM, ZB; NZMN1, DILM, ZB, ZEV
HPL08018EN
DOL starters
Motor-starter combinations
8/19
Modules
PKZM0, DILM, ZB; NZMN1, DILM, ZB, ZEV
HPL08019EN
DOL startersModules
Motor data
Setting range
Overload trip
Basic unit
Rated operational
power
AC-3
Rated operational
current
AC-3
Rated short-circuit
current
380 V
400 V
415 V
P
400 V
380 - 415 V
Ie
Iq
Ir
Irm
kW
A
kA
A
A
I
Contactor
Overload relay
Contactor
Overload relay
Current sensor
Notes
Type “1” coordination Type “1” coordination Type “2” coordination Type “2” coordination
Short-circuit release
Type
Type
Type
Type
Type
Type
Modules PKM0, DILM and ZB with and without automatic reset
I>
M
3~
0.06
0.21
100
0.16 - 0.24
3.5
PKM0-0,25
DILM7-…(…)
ZB12-0,24
DILM7-…(…)
ZB12-0,24
–
0.09
0.31
100
0.24 - 0.4
5.6
PKM0-0,4
DILM7-…(…)
ZB12-0,4
DILM7-…(…)
ZB12-0,4
–
0.12
0.41
100
0.4 - 0.6
8.82
PKM0-0,63
DILM7-…(…)
ZB12-0,6
DILM7-…(…)
ZB12-0,6
–
0.18
0.6
100
0.4 - 0.6
8.82
PKM0-0,63
DILM7-…(…)
ZB12-0,6
DILM7-…(…)
ZB12-0,6
–
0.25
0.8
100
0.6 - 1
14
PKM0-1
DILM7-…(…)
ZB12-1
DILM7-…(…)
ZB12-1
–
0.37
1.1
100
1 - 1.6
22.4
PKM0-1,6
DILM7-…(…)
ZB12-1,6
DILM7-…(…)
ZB12-1,6
–
0.55
1.5
100
1 - 1.6
22.4
PKM0-1,6
DILM7-…(…)
ZB12-1,6
DILM7-…(…)
ZB12-1,6
–
0.75
1.9
100
1.6 - 2.4
35
PKM0-2,5
DILM7-…(…)
ZB12-2,4
DILM7-…(…)
ZB12-2,4
–
1.1
2.6
100
2.4 - 4
56
PKM0-4
DILM7-…(…)
ZB12-4
DILM7-…(…)
ZB12-4
–
1.5
3.6
100
2.4 - 4
56
PKM0-4
DILM7-…(…)
ZB12-4
DILM7-…(…)
ZB12-4
–
2.2
5
100
4-6
88.2
PKM0-6,3
DILM7-…(…)
ZB12-6
DILM17-…(…)
ZB32-6
–
3
6.6
100
6 - 10
140
PKM0-10
DILM9-…(…)
ZB12-10
DILM17-…(…)
ZB32-10
–
4
8.5
100
6 - 10
140
PKM0-10
DILM9-…(…)
ZB12-10
DILM17-…(…)
ZB32-10
–
5.5
11.3
50
8 - 12
168
PKM0-12
DILM12-…(…)
ZB12-12
–
–
–
5.5
11.3
50
10 - 16
168
PKM0-12
–
–
DILM17-…(…)
ZB32-16
–
7.5
15.2
50
10 - 16
224
PKM0-16
DILM17-…(…)
ZB32-16
DILM17-…(…)
ZB32-16
–
11
21.7
50
16 - 24
350
PKM0-25
DILM25-…(…)
ZB32-24
DILM25-…(…)
ZB32-24
–
15
29.3
50
20 - 32
448
PKM0-32
DILM32-…(…)
ZB32-32
DILM32-…(…)
ZB32-32
–
The motor-starter combinations consist of the motor
protective circuit breaker (without overload function),
a contactor and overload relay modules.
They conform with IEC/EN 60947-4-1 or VDE 0660
Part 102.
Iq = conditional rated current
The combinations can be operated with or without
manual reset. In the Manual position, the combination is
blocked against automatic restarting and must be reset
locally. In the Auto position, the combination automatically switches on again after the bimetallic elements
have cooled down.
Further information
Technical data PKZMO
Accessories PKZ
Technical data DILM
Further actuating voltages
DIL accessories
Technical data ZB...
Accessories ZB...
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/56
→ Chapter 6
→ 6/26
Modules NZMN1, DILM and Z...
I>
M
3~
2010 CA08103002Z-EN
18.5
36
50
24 - 40
320 - 560
NZMN1-S40
DILM40(…)
ZB65-40
–
–
–
18.5
36
50
3 - 65
320 - 560
NZMN1-S40
–
–
DILM40(…)
ZEV
ZEV-XSW-65
22
41
50
40 - 57
400 - 700
NZMN1-S50
DILM50(…)
ZB65-57
–
–
–
22
41
50
3 - 65
400 - 700
NZMN1-S50
–
–
DILM50(…)
ZEV
ZEV-XSW-65
30
55
50
40 - 57
504 - 882
NZMN1-S63
DILM65(…)
ZB65-57
–
–
–
30
55
50
3 - 65
504 - 882
NZMN1-S63
–
–
DILM65(…)
ZEV
ZEV-XSW-65
37
68
50
50 - 70
640 - 1120
NZMN1-S80
DILM80(…)
ZB150-70
–
–
–
37
68
50
10 - 145
640 - 1120
NZMN1-S80
–
–
DILM80(…)
ZEV
ZEV-XSW-145
45
81
50
70 - 100
800 - 1250
NZMN1-S100
DILM95(…)
ZB150-100
–
–
–
45
81
50
10 - 145
800 - 1250
NZMN1-S100
–
–
DILM95(…)
ZEV
ZEV-XSW-145
55
99
50
70 - 100
800 - 1250
NZMN1-S100
DILM115(…)
ZB150-100
–
–
–
55
99
50
10 - 145
800 - 1250
NZMN1-S100
–
–
DILM115(…)
ZEV
ZEV-XSW-145
www.eaton.com
The motor-starter combinations consist of the circuitbreaker (without overload function), contactor and
overload relay module.
They conform with IEC/EN 60947-4-1 or VDE 0660
Part 102.
Iq = conditional rated current
The combinations can be operated with or without
manual reset. In the Manual position, the combination is
blocked against automatic restarting and must be reset
locally. In the Auto position, the combination automatically switches on again after the bimetallic elements
have cooled down.
Maximum tripping tolerance CLASS10.
Further information
Technical data NZMN1
Accessories NZM1
Technical data DILM
Further actuating voltages
DIL accessories
Technical data ZB..., ZEV
Accessories ZB...
Accessories ZEV
2010 CA08103002Z-EN
Page
→ Chapter 17
→ 17/78
→ Chapter 5
→ 5/75
→ 5/54
→ Chapter 6
→ 6/26
→ 6/20
www.eaton.com
8/20
Motor-starter combinations
Reversing starters
Complete units
MSC-R: PKZM0, DILM
HPL08020EN
Reversing starters
Motor-starter combinations
8/21
Complete units
MSC-R: PKZM0, DILM
HPL08021EN
Reversing startersComplete units
Motor data
Setting range
Rated
operational
power
AC-3
Rated
operational
current
AC-3
Rated short-circuit
current
Overload
trip
Shortcircuit
releases
380 - 415 V
380 - 415 V
380 V
400 V
415 V
P
400 V
Ie
Type “1”
coordination
Iq
Type “2”
coordination
Iq
kW
A
Ir
Irm
kA
kA
A
A
0.06
0.21
150
50
0.16 - 0.25
3.5
0.09
0.31
150
50
0.25 - 0.4
5.6
0.12
0.18
0.25
0.41
0.6
0.8
150
50
0.4 - 0.63
8.82
150
50
0.63 - 1
14
0.37
0.55
0.75
1.1
1.5
1.9
150
50
1 - 1.6
22.4
150
50
1.6 - 2.5
35
1.1
1.5
2.2
2.6
3.6
5
150
50
2.5 - 4
56
150
50
4 - 6.3
88.2
3
6.6
150
–
6.3 - 10
140
4
8.5
150
–
6.3 - 10
140
5.5
11.3
50
–
8 - 12
168
Motor starters
actuating voltage
230 V 50 Hz
Part no.
Article no.
Price
See price
list
Motor starters
actuating voltage
24 V DC
Part no.
Article no.
Price
See price
list
Std. pack
Motor protective
circuit breaker
Contactor
Reversing starter
wiring set
Notes
Mechanical
connection
module,
electrical
contact module
and reversing
connector
I
Type
Type
Type
PKZM0-0,25
DILM7-01(...)
PKZM0-XRM12
PKZM0-0,4
DILM7-01(...)
PKZM0-XRM12
PKZM0-0,63
DILM7-01(...)
PKZM0-XRM12
PKZM0-1
DILM7-01(...)
PKZM0-XRM12
PKZM0-1,6
DILM7-01(...)
PKZM0-XRM12
PKZM0-2,5
DILM7-01(...)
PKZM0-XRM12
PKZM0-4
DILM7-01(...)
PKZM0-XRM12
PKZM0-6,3
DILM7-01(...)
PKZM0-XRM12
PKZM0-10
DILM7-01(...)
PKZM0-XRM12
PKZM0-10
DILM9-01(...)
PKZM0-XRM12
PKZM0-12
DILM12-01(...)
PKZM0-XRM12
Complete units MSC-R
MSC-R-0.25-M7(230V50HZ)
283171
MSC-R-0.4-M7(230V50HZ)
283172
MSC-R-0.63-M7(230V50HZ)
283173
MSC-R-1-M7(230V50HZ)
283175
MSC-R-1.6-M7(230V50HZ)
283176
MSC-R-2.5-M7(230V50HZ)
283178
MSC-R-4-M7(230V50HZ)
283179
MSC-R-6.3-M7(230V50HZ)
283181
MSC-R-10-M7(230V50HZ)
283182
MSC-R-10-M9(230V50HZ)
283183
MSC-R-12-M12(230V50HZ)
283184
MSC-R-0.25-M7(24VDC)
283190
MSC-R-0.4-M7(24VDC)
283191
MSC-R-0.63-M7(24VDC)
283192
MSC-R-1-M7(24VDC)
283194
MSC-R-1.6-M7(24VDC)
283195
MSC-R-2.5-M7(24VDC)
283197
MSC-R-4-M7(24VDC)
283198
MSC-R-6.3-M7(24VDC)
283200
MSC-R-10-M7(24VDC)
283201
MSC-R-10-M9(24VDC)
283202
MSC-R-12-M12(24VDC)
283203
1
off
The reversing starters (complete devices) consist of a
PKZM0 motor protective circuit breaker and two
contactors DILM.
With the adapterless top-hat rail mounting of starters
up to 12 A, only the motor-protective circuit-breaker on
the top-hat rail requires an adapter. The contactors are
provided with mechanical support via a mechanical
connection element.
Control wire guide with max. 6 conductors with up to
2.5 mm external diameter or 4 conductors up to 3.5 mm
external diameter.
From 16 A, the motor protective circuit breaker and
contactors are mounted on the top-hat rail adapter
plate.
The connection of the main circuit between PKZ and
contactor is established with electrical contact
modules.
Complete units with mechanical interlock, starters up
to 12 A also with electrical interlock.
When using auxiliary contacts DILA‐XHIT…
(→ 5/40) the electrical plugs can be pulled without
having to remove the front mounting auxiliary contact.
Cannot be combined with standard auxiliary contact
NHI-E-...-PKZ0-C with spring-loaded terminal.
Further information
Technical data PKZM0
Accessories PKZ
Technical data DILM
Further actuation voltages
DILM accessories
M
3~
3
6.6
50
50
6.3 - 10
140
4
11.3
50
50
8 - 12
168
7.5
15.2
50
50
10 - 16
224
11
21.7
50
50
20 - 25
350
15
29.3
50
50
25 - 32
448
MSC-R-10-M17(230V50HZ)
101049
MSC-R-12-M17(230V50HZ)
101050
MSC-R-16-M17(230V50HZ)
283186
MSC-R-25-M25(230V50HZ)
283187
MSC-R-32-M32(230V50HZ)
283188
MSC-R-10-M17(24VDC)
101051
MSC-R-12-M17(24VDC)
101052
MSC-R-16-M17(24VDC)
283204
MSC-R-25-M25(24VDC)
283205
MSC-R-32-M32(24VDC)
283206
PKZM0-10
DILM17-01(...)
PKZM0-XRM32
PKZM0-12
DILM17-01(...)
PKZM0-XRM32
PKZM0-16
DILM17-01(...)
PKZM0-XRM32
PKZM0-25
DILM25-01(...)
PKZM0-XRM32
PKZM0-32
DILM32-01(...)
PKZM0-XRM32
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/54
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/22
Motor-starter combinations
Reversing starters
Modules
PKZM, DILM
HPL08022EN
Reversing starters
Motor-starter combinations
8/23
Modules
PKZM, DILM
HPL08023EN
Reversing startersModules
Motor data
Rated operational
power
400 V
Setting range
Rated operational
current
AC-3
Rated short-circuit current
380 - 415 V
380 - 415 V
400 V
Motor protective
circuit breaker
Overload trip
Short-circuit
release
Type “2”
coordination
Iq
P
Ie
Type “1”
coordination
Iq
Ir
Irm
kW
A
kA
kA
A
A
I
Type
Contactor
Contactor
Type “1”
coordination
Type “2”
coordination
Type
Type
Notes
Modules PKZM0 and DILM
0.06
0.21
150
50
0.16 - 0.25
3.5
PKZM0-0,25
0.09
0.31
150
50
0.25 - 0.4
5.6
PKZM0-0,4
2x
DILM7-…(…)
DILM7-…(…)
2x
DILM7-…(…)
DILM7-…(…)
0.12
0.41
150
50
0.4 - 0.63
8.82
PKZM0-0,63
DILM7-…(…)
DILM7-…(…)
0.18
0.6
150
50
0.4 - 0.63
8.82
PKZM0-0,63
DILM7-…(…)
DILM7-…(…)
0.25
0.8
150
50
0.63 - 1
14
PKZM0-1
DILM7-…(…)
DILM7-…(…)
0.37
1.1
150
50
1 - 1.6
22.4
PKZM0-1,6
DILM7-…(…)
DILM7-…(…)
0.55
1.5
150
50
1 - 1.6
22.4
PKZM0-1,6
DILM7-…(…)
DILM7-…(…)
0.75
1.9
150
50
1.6 - 2.5
35
PKZM0-2,5
DILM7-…(…)
DILM7-…(…)
1.1
2.6
150
50
2.5 - 4
56
PKZM0-4
DILM7-…(…)
DILM7-…(…)
1.5
3.6
150
50
2.5 - 4
56
PKZM0-4
DILM7-…(…)
DILM7-…(…)
2.2
5
150
50
4 - 6.3
88.2
PKZM0-6,3
DILM7-…(…)
DILM7-…(…)
3
6.6
150
50
6.3 - 10
140
PKZM0-10
DILM9-…(…)
DILM17-…(…)
4
8.5
150
50
6.3 - 10
140
PKZM0-10
DILM9-…(…)
DILM17-…(…)
5.5
11.3
50
50
8 - 12
168
PKZM0-12
DILM12-…(…)
DILM17-…(…)
7.5
15.2
50
50
10 - 16
224
PKZM0-16
DILM17-…(…)
DILM17-…(…)
11
21.7
50
50
20 - 25
350
PKZM0-25
DILM25-…(…)
DILM25-…(…)
15
29.3
50
50
25 - 32
448
PKZM0-32
DILM32-…(…)
DILM32-…(…)
The motor-starter combinations consist of the motor protective circuit breaker
or a circuit breaker and a contactor. They conform with IEC/EN 60947-4-1 or
VDE 0660 Part 102.
Iq = conditional rated current
Further information
Technical data PKZM0
Accessories PKZ
Technical data DILM
Other operating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/73
→ 5/54
M
3~
Modules PKZM4 and DILM
5.5
11.3
50
50
10 - 16
224
PKZM4-16
7.5
15.2
50
50
10 - 16
224
PKZM4-16
2x
DILM17-…(…)
DILM17-…(…)
2x
DILM17-…(…)
DILM17-…(…)
11
21.7
50
50
20 - 25
350
PKZM4-25
DILM25-…(…)
DILM25-…(…)
15
29.3
50
50
25 - 32
448
PKZM4-32
DILM32-…(…)
DILM32-…(…)
18.5
36
50
50
32 - 40
560
PKZM4-40
DILM40(…)
DILM40(…)
22
41
50
50
40 - 50
700
PKZM4-50
DILM50(…)
DILM50(…)
30
55
50
50
50 - 58
812
PKZM4-58
DILM65(…)
DILM65(…)
34
63
50
50
55 - 65
882
PKZM4-63
DILM65(…)
DILM65(…)
The motor-starter combinations consist of the motor protective circuit breaker
or a circuit breaker and a contactor.
They conform with IEC/EN 60947-4-1 or VDE 0660 Part 102.
Iq = rated conditional short-circuit current.
Further information
Technical data PKZM0
Accessories PKZ
Technical data DILM
Other operating voltages
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/74
→ 5/54
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/24
Motor-starter combinations
Reversing starters
Modules
NZMN, NZMH, DILM
HPL08024EN
Reversing starters
Rated operational power
HPL08025EN
Setting range
Rated operational current
Rated short-circuit
current
Overload trip
8/25
Modules
NZMN, NZMH, DILM
Circuit-breaker
Motor data
Motor-starter combinations
Contactor
Contactor
Type “1” coordination
Type “2” coordination
Type
Type
Notes
Short-circuit release
AC-3
AC-3
380 V
400 V
415 V
P
400 V
Ie
Iq
Ir
Irm
kW
A
kA
A
A
400/415 V
I
Type
Modules NZMN and DILM
15
29.3
50
25 - 32
320 - 448
NZMN1-M32
2x
DILM40(…)
2x
DILM80(…)
18.5
36
50
32 - 40
320 - 560
NZMN1-M40
2x
DILM40(…)
2x
DILM80(…)
22
41
50
40 - 50
400 - 700
NZMN1-M50
2x
DILM50(…)
2x
DILM80(…)
30
55
50
50 - 63
504 - 882
NZMN1-M63
2x
DILM65(…)
2x
DILM80(…)
37
68
50
63 - 80
640 - 1120
NZMN1-M80
2x
DILM80(…)
2x
DILM80(…)
45
81
50
80 - 100
800 - 1250
NZMN1-M100
2x
DILM95(…)
2x
DILM95(…)
55
99
50
80 - 100
800 - 1250
NZMN1-M100
2x
DILM115(…)
2x
DILM115(…)
75
134
50
125 - 160
1280 - 2240
NZMN2-M160
2x
DILM150(…)
2x
DILM150(…)
90
161
50
160 - 200
1600 - 2500
NZMN2-M200
2x
DILM185A/22(…)
2x
DILM185A/22(…)
110
196
50
160 - 200
1600 - 2500
NZMN2-M200
2x
DILM225A/22(…)
2x
DILM225A/22(…)
132
231
50
175 - 350
350 - 4900
NZMN3-ME350
2x
DILM250/22(…)
2x
DILM250/22(…)
160
279
50
175 - 350
350 - 4900
NZMN3-ME350
2x
DILM300A/22(…)
2x
DILM300A/22(…)
200
349
50
175 - 350
350 - 4900
NZMN3-ME350
2x
DILM400/22(…)
2x
DILM400/22(…)
250
437
50
225 - 450
450 - 6300
NZMN3-ME450
2x
DILM500/22(…)
2x
DILM500/22(…)
315
544
50
275 - 550
550 - 7700
NZMN4-ME550
2x
DILM580/22(…)
2x
–
400
683
50
438 - 875
875 - 12250
NZMN4-ME875
2x
DILM650/22(…)
2x
–
450
750
50
438 - 875
875 - 12250
NZMN4-ME875
2x
DILM750/22(…)
2x
–
500
820
50
438 - 875
875 - 12250
NZMN4-ME875
2x
DILM820/22(…)
2x
–
560
947
50
700 - 1400
1400 - 19600
NZMN4-ME1400
2x
DILM1000/22(…)
2x
–
The motor starter combinations consist of the motor protective
circuit-breaker and a contactor.
They comply with IEC/EN 60947-4-1 and VDE 0660 Part 102.
Iq = conditional rated current.
M
3~
Modules NZMH and DILM
22
41
100
40 - 50
400 - 700
NZMH2-M50
2x
DILM80(…)
2x
DILM80(…)
30
55
100
50 - 63
504 - 882
NZMH2-M63
2x
DILM80(…)
2x
DILM80(…)
37
68
100
63 - 80
640 - 1120
NZMH2-M80
2x
DILM80(…)
2x
DILM80(…)
55
81
100
80 - 100
800 - 1250
NZMH2-M100
2x
DILM95(…)
2x
DILM95(…)
55
100
100
100 - 125
1000 - 1750
NZMH2-M125
2x
DILM115(…)
2x
DILM115(…)
75
134
100
125 - 160
1280 - 2240
NZMH2-M160
2x
DILM150(…)
2x
DILM150(…)
30
55
100
45 - 90
90 - 1260
NZMH2-ME90
2x
DILM80(…)
2x
DILM80(…)
37
68
100
45 - 90
90 - 1260
NZMH2-ME90
2x
DILM80(…)
2x
DILM80(…)
45
81
100
45 - 90
90 - 1260
NZMH2-ME90
2x
DILM95(…)
2x
DILM95(…)
55
100
100
70 - 140
140 - 1960
NZMH2-ME140
2x
DILM115(…)
2x
DILM115(…)
75
134
100
70 - 140
140 - 1960
NZMH2-ME140
2x
DILM150(…)
2x
DILM150(…)
90
161
100
110 - 120
220 - 3080
NZMH2-ME220
2x
DILM185A/22(…)
2x
DILM185A/22(…)
110
196
100
110 - 120
220 - 3080
NZMH2-ME220
2x
DILM225A/22(…)
2x
DILM225A/22(…)
132
231
100
175 - 350
350 - 4900
NZMH3-ME350
2x
DILM250/22(…)
2x
DILM250/22(…)
160
279
100
175 - 350
350 - 4900
NZMH3-ME350
2x
DILM300A/22(…)
2x
DILM300A/22(…)
200
349
100
175 - 350
350 - 4900
NZMH3-ME350
2x
DILM400/22(…)
2x
DILM400/22(…)
The motor-starter combinations consist of the motor protective
circuit breaker or a circuit breaker and a contactor.
They conform with IEC/EN 60947-4-1 or VDE 0660 Part 102.
Iq = rated conditional short-circuit current.
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/26
Motor-starter combinations
Starters on busbar adapter
DOL starters
MSC-D.../BBA
HPL08026EN
Starters on busbar adapter
Motor-starter combinations
8/27
DOL starters
MSC-D.../BBA
HPL08027EN
Starters on busbar adapterDOL starters
Motor data
Motor
rating
AC-3
Setting range
Rated
operational
current
AC-3
Rated short-circuit current
Overload
trip
Shortcircuit
release
380 - 415 V
380 - 415 V
380 V
400 V
415 V
P
400 V
Type “1”
coordination
Type “2”
coordination
Ie
Iq
Iq
Ir
Irm
kW
A
kA
kA
A
A
Motor starters
actuating voltage
230 V 50 Hz
Part no.
Article no.
Price
See price
list
Std.
pack
Motor starters
actuating voltage
24 V DC
Part no.
Article no.
Price
See price
list
Std.
pack
I
Motor
protective
circuit
breaker
Contactor
DOL starter
wiring set
Busbar
adapter
Type
Type
Type
Type
PKZM0-0,25
DILM7-10(…)
PKZM0-XDM12
BBA0-25
PKZM0-0,4
DILM7-10(…)
PKZM0-XDM12
PKZM0-0,63
DILM7-10(…)
PKZM0-XDM12
PKZM0-1
DILM7-10(…)
PKZM0-XDM12
PKZM0-1,6
DILM7-10(…)
PKZM0-XDM12
PKZM0-2,5
DILM7-10(…)
PKZM0-XDM12
PKZM0-4
DILM7-10(…)
PKZM0-XDM12
PKZM0-6,3
DILM7-10(…)
PKZM0-XDM12
PKZM0-10
DILM7-10(…)
PKZM0-XDM12
PKZM0-10
DILM9-10(…)
PKZM0-XDM12
PKZM0-12
DILM12-10(…) PKZM0-XDM12
PKZM0-16
DILM15-10(…) PKZM0-XDM12
PKZM0-10
DILM17-10(…) PKZM0-XM32DE
PKZM0-12
DILM17-10(…) PKZM0-XM32DE
PKZM0-16
DILM17-10(…) PKZM0-XM32DE
PKZM0-25
DILM25-10(…) PKZM0-XM32DE
PKZM0-32
DILM32-10(…) PKZM0-XM32DE
Notes
Mechanical connection module
and electrical
contact module
Complete devices PKZ and DIL on BBA
I
0.06
0.21
100
50
0.16 - 0.25
3.5
0.09
0.31
100
50
0.25 - 0.4
5.6
0.12
0.18
0.25
0.41
0.6
0.8
100
50
0.4 - 0.63
8.82
100
50
0.63 - 1
14
0.37
0.55
0.75
1.1
1.5
1.9
100
50
1 - 1.6
22.4
100
50
1.6 - 2.5
35
1.1
1.5
2.2
2.6
3.6
5
100
50
2.5 - 4
56
100
50
4 - 6.3
88.2
3
6.6
100
–
6.3 - 10
140
4
8.5
100
–
6.3 - 10
140
5.5
11.3
100
–
8 - 12
168
7.5
15.2
50
–
10 - 16
224
3
4
5.5
6.6
8.5
11.3
100
50
6.3 - 10
140
100
50
8 - 12
168
7.5
15.2
50
50
10 - 16
224
11
21.7
50
50
20 - 25
350
15
29.3
50
50
25 - 32
448
MSC-D-0.25-M7(230V50HZ)/BBA1)
102737
MSC-D-0.4-M7(230V50HZ)/BBA1)
102738
MSC-D-0.63-M7(230V50HZ)/BBA1)
102739
MSC-D-1-M7(230V50HZ)/BBA1)
102950
MSC-D-1.6-M7(230V50HZ)/BBA1)
102951
MSC-D-2.5-M7(230V50HZ)/BBA1)
102952
MSC-D-4-M7(230V50HZ)/BBA1)
102953
MSC-D-6.3-M7(230V50HZ)/BBA1)
102954
MSC-D-10-M7(230V50HZ)/BBA
102955
MSC-D-10-M9(230V50HZ)/BBA
102956
MSC-D-12-M12(230V50HZ)/BBA
102957
MSC-D-16-M15(230V50HZ)/BBA
102958
1 off
MSC-D-0.25-M7(24VDC)/BBA1)
102964
MSC-D-0.4-M7(24VDC)/BBA1)
102965
MSC-D-0.63-M7(24VDC)/BBA1)
102966
MSC-D-1-M7(24VDC)/BBA1)
102967
MSC-D-1.6-M7(24VDC)/BBA1)
102968
MSC-D-2.5-M7(24VDC)/BBA1)
102969
MSC-D-4-M7(24VDC)/BBA1)
102970
MSC-D-6.3-M7(24VDC)/BBA
102971
MSC-D-10-M7(24VDC)/BBA
102972
MSC-D-10-M9(24VDC)/BBA
102973
MSC-D-12-M12(24VDC)/BBA
102974
MSC-D-16-M15(24VDC)/BBA
102975
1 off
The DOL starters (complete devices) consist of a
motor protective circuit breaker PKZM0 and a
contactor DILM. These combinations are
mounted on busbars.
The connection of the main circuit between PKZ
and contactor is established with electrical
contact modules.
Cannot be combined with standard auxiliary
contact NHI-E-...-PKZ0-C with spring-loaded
terminal.
Further information
Technical data PKZM0
Accessories PKZ
Technical data DILM
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/54
1) To
assemble Type F starters that conform
with UL508, incoming terminals BK25/3-PKZ0-E
and, if necessary, three-phase terminal blocks
B3.../...-PKZ0 can be added to motor starter
combinations.
Type F starter → Page 8/34
M
3~
MSC-D-10-M17(230V50HZ)/BBA
102959
MSC-D-12-M17(230V50HZ)/BBA
102960
MSC-D-16-M17(230V50HZ)/BBA1)
102961
MSC-D-25-M25(230V50HZ)/BBA1)
102962
MSC-D-32-M32(230V50HZ)/BBA1)
102963
MSC-D-10-M17(24VDC)/BBA
102976
MSC-D-12-M17(24VDC)/BBA
102977
MSC-D-16-M17(24VDC)/BBA
102978
MSC-D-25-M25(24VDC)/BBA
102979
MSC-D-32-M32(24VDC)/BBA
102980
BBA0-32
I
M
3~
Starters on busbar adapterReversing starters
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/28
Motor-starter combinations
Starters on busbar adapter
Reversing starters
MSC-R.../BBA
HPL08028EN
Motor starters
actuating voltage
230 V 50 Hz
Motor data
Motor rating
Motor-starter combinations
HPL08029EN
Motor starters
actuating voltage
24 V DC
Overload
trip
8/29
Reversing starters
MSC-R.../BBA
Price
See price
list
Std.
pack
Motor
protective
circuit
breaker
Contactor
Wiring set
Reversing
starters
Busbar
adapter
Setting range
Notes
Rated
operational
current
AC-3
Rated short-circuit
current
380 - 415 V
380 - 415 V
380 V
400 V
415 V
P
400 V
Ie
Type “1”
coordination
Iq
Type “2”
coordination
Iq
Ir
Irm
kW
A
kA
kA
A
A
AC-3
Price
See price
list
Starters on busbar adapter
Short-circuit
release
Part no.
Article no.
Mechanical connection module,
electrical contact
module and
reversing connector
Part no.
Article no.
Type
I
Type
Type
Type
BBA0R-25 The reversing starters (complete
devices) consist of a PKZM0 motor
protective circuit breaker and two
contactors DILM.
These combinations are mounted on busbars.
The connection of the main circuit
between PKZ and contactor is established with electrical contact modules.
Complete units with mechanical interlock, starters up to 12 A also with
electrical interlock.
Complete devices PKZ and DILM on BBA for reversing starters
0.06
0.21
100
50
0.16 - 0.25
3.5
0.09
0.31
100
50
0.25 - 0.4
5.6
0.12
0.18
0.25
0.41
0.6
0.8
100
50
0.4 - 0.63
8.82
100
50
0.63 - 1
14
0.37
0.55
0.75
1.1
1.5
1.9
100
50
1 - 1.6
22.4
100
50
1.6 - 2.5
35
1.1
1.5
2.2
2.6
3.6
5
100
50
2.5 - 4
56
100
50
4 - 6.3
88.2
3
6.6
100
–
6.3 - 10
140
4
8.5
100
–
6.3 - 10
140
5.5
11.3
100
–
8 - 12
168
3
4
5.5
6.6
8.5
11.3
100
50
6.3 - 10
140
100
50
8 - 12
168
7.5
15.2
50
50
10 - 16
224
11
21.7
50
50
20 - 25
350
15
29.3
50
50
25 - 32
448
MSC-R-0.25-M7(230V50HZ)/BBA
102981
MSC-R-0.4-M7(230V50HZ)/BBA
102982
MSC-R-0.63-M7(230V50HZ)/BBA
102983
MSC-R-1-M7(230V50HZ)/BBA
102984
MSC-R-1.6-M7(230V50HZ)/BBA
102985
MSC-R-2.5-M7(230V50HZ)/BBA
102986
MSC-R-4-M7(230V50HZ)/BBA
102987
MSC-R-6.3-M7(230V50HZ)/BBA
102988
MSC-R-10-M7(230V50HZ)/BBA
102989
MSC-R-10-M9(230V50HZ)/BBA
102990
MSC-R-12-M12(230V50HZ)/BBA
102991
MSC-R-0.25-M7(24VDC)/BBA
102997
MSC-R-0.4-M7(24VDC)/BBA
102998
MSC-R-0.63-M7(24VDC)/BBA
102999
MSC-R-1-M7(24VDC)/BBA
103000
MSC-R-1.6-M7(24VDC)/BBA
103001
MSC-R-2.5-M7(24VDC)/BBA
103002
MSC-R-4-M7(24VDC)/BBA
103003
MSC-R-6.3-M7(24VDC)/BBA
103004
MSC-R-10-M7(24VDC)/BBA
103005
MSC-R-10-M9(24VDC)/BBA
103006
MSC-R-12-M12(24VDC)/BBA
103007
MSC-R-10-M17(230V50HZ)/BBA
102992
MSC-R-12-M17(230V50HZ)/BBA
102993
MSC-R-16-M17(230V50HZ)/BBA
102994
MSC-R-25-M25(230V50HZ)/BBA
102995
MSC-R-32-M32(230V50HZ)/BBA
102996
MSC-R-10-M17(24VDC)/BBA
103008
MSC-R-12-M17(24VDC)/BBA
103009
MSC-R-16-M17(24VDC)/BBA
103010
MSC-R-25-M25(24VDC)/BBA
103011
MSC-R-32-M32(24VDC)/BBA
103012
1 off
PKZM0-0,25
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-0,4
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-0,63
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-1
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-1,6
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-2,5
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-4
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-6,3
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-10
2x
DILM7-01(…)
PKZM0-XRM12
PKZM0-10
2x
DILM9-01(…)
PKZM0-XRM12
PKZM0-12
2x
DILM12-01(…) PKZM0-XRM12
PKZM0-10
2x
PKZM0-12
2x
PKZM0-16
2x
PKZM0-25
2x
PKZM0-32
2x
DILM17-01(…) PKZM0-XM32DE + BBA0R-32
DILM32-XRL
DILM17-01(…) PKZM0-XM32DE +
DILM32-XRL
DILM17-01(…) PKZM0-XM32DE +
DILM32-XRL
DILM25-01(…) PKZM0-XM32DE +
DILM32-XRL
DILM32-01(…) PKZM0-XM32DE +
DILM32-XRL
Further information
Technical data PKZM0
Accessories PKZ
Technical data DILM
DILM accessories
Page
→ Chapter 7
→ 7/10
→ Chapter 5
→ 5/54
M
3~
M
3~
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/30
Motor-starter combinations
for North America
DOL starters, modules
PKZ2/S-SP, ZMR, ZM
HPL08030EN
for North America
Motor-starter combinations
8/31
DOL starters, modules
PKZ2/S-SP, ZMR, ZM
HPL08031EN
for North AmericaDOL starters, modules
Maximum motor rating
Setting range
Alternating current HP
Overload
trip
200 V
208 V
230 V
240 V
460 V
480 V
575 V
600 V
HP
HP
HP
HP
Short-circuit
release
Ir
Irm
A
A
I
Rated short-circuit breaking
capacity
240 V
480 Y
600 Y
277 V
347 V
kA
kA
kA
Basic unit
Trip block
Price
Total of
module prices
Type
Type
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
ZMR-0.6-PKZ2
033943
ZMR-1-PKZ2
033950
ZMR-1.6-PKZ2
033952
ZMR-2.4-PKZ2
033955
ZMR-4-PKZ2
033957
ZMR-6-PKZ2
033966
ZMR-10-PKZ2
033967
ZMR-16-PKZ2
033968
ZMR-25-PKZ2
033969
ZMR-32-PKZ2
033973
ZMR-40-PKZ2
033975
1 off
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
PKZ2/S-SP(110V50HZ,120V60HZ)
050940
ZM-0.6-PKZ2
024232
ZM-1-PKZ2
028979
ZM-1.6-PKZ2
031352
ZM-2.4-PKZ2
033725
ZM-4-PKZ2
036098
ZM-6-PKZ2
038471
ZM-10-PKZ2
040844
ZM-16-PKZ2
043217
ZM-25-PKZ2
045590
ZM-32-PKZ2
047963
ZM-40-PKZ2
050336
1 off
Std.
pack
Notes
Euro
DG
Modules PKZ2/S-SP and trip blocks ZMR with overload relay function
1)
0.4 - 0.6
5-8
100
65
42
½
½
0.6 - 1
8 - 14
100
65
42
¾
1
1 - 1.6
14 - 22
100
65
42
½
½
1
1½
1.6 - 2.4
20 - 35
100
65
42
1
1
2
3
2.4 - 4
35 - 55
100
65
42
1½
1½
3
5
4-6
50 - 80
100
65
42
2
3
5
7½
6 - 10
80 - 140
100
65
42
3
5
10
10
10 - 16
130 - 220
100
65
42
7½
7½
20
25
16 - 27
200 - 350
100
65
42
10
10
20
30
24 - 32
275 - 425
100
65
–
10
15
30
30
32 - 42
350 - 500
100
65
–
0.4 - 0.6
5-8
100
65
42
1 off
For use with networks with grounded
star point
Up to 27 A
600 Y/347 V AC
480 Y/277 V AC
1 off
27 – 42 A
480 Y/277 V AC
1 off
1 off
1 off
1 off
1 off
1 off
1 off
Service factor (SF)
Set value Ir on the current scale, depending on the
load factor
SF = 1.15 → Ir = 1 x In mot
SF = 1 → Ir = 0.9 x In mot
Terminal capacity of high-capacity compact starters PKZ2/ZM…/S
Main terminals
Cables Cu 75 °C, min. AWG 14, max. AWG 6
Torque 1.8 Nm
Control circuit terminals
Cables min. AWG 20, max. AWG 16 (0.5–1 mm2)
With insulated/uninsulated blade terminal, nominal size 2.8
1 off
Modules PKZ2/S-SP and trip blocks ZM
1)
Notes
2010 CA08103002Z-EN
½
½
0.6 - 1
8 - 14
100
65
42
¾
1
1 - 1.6
14 - 22
100
65
42
½
½
1
1½
1.6 - 2.4
20 - 35
100
65
42
1
1
2
3
2.4 - 4
35 - 55
100
65
42
1½
1½
3
5
4-6
55 - 80
100
65
42
2
3
5
7½
6 - 10
80 - 140
100
65
42
3
5
10
10
10 - 16
130 - 220
100
65
42
7½
7½
20
25
16 - 27
200 - 350
100
65
42
10
10
20
30
24 - 32
275 - 425
100
65
–
10
15
30
30
32 - 42
350 - 500
100
65
–
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1) Calculate
motor power in this range according to the rated operational current.
Stated values to NEC Table 430 … 150
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/32
Motor-starter combinations
for North America
Reversing starters, modules
PKZ2-SP, ZMR, ZM
HPL08032EN
for North America
Motor-starter combinations
8/33
Reversing starters, modules
PKZ2-SP, ZMR, ZM
HPL08033EN
for North AmericaReversing starters, modules
Maximum motor rating
Setting range
Alternating
current HP
200 V
208 V
Overload trip
230 V
240 V
460 V
480 V
575 V
600 V
HP
HP
HP
HP
Short-circuit
release
Ir
Irm
A
A
0.4 - 0.6
Rated short-circuit breaking
capacity Icn
240 V
480 Y
600 Y
277 V
347 V
kA
kA
kA
5-8
100
65
42
I
Basic unit
Trip block
Price
Total of
module prices
Type2)
Type
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
ZMR-0.6-PKZ2
033943
ZMR-1-PKZ2
033950
ZMR-1.6-PKZ2
033952
ZMR-2.4-PKZ2
033955
ZMR-4-PKZ2
033957
ZMR-6-PKZ2
033966
ZMR-10-PKZ2
033967
ZMR-16-PKZ2
033968
ZMR-25-PKZ2
033969
ZMR-32-PKZ2
033973
ZMR-40-PKZ2
033975
1 off
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
PKZ2-SP-FVR(*V*HZ)
925109
ZM-0.6-PKZ2
024232
ZM-1-PKZ2
028979
ZM-1.6-PKZ2
031352
ZM-2.4-PKZ2
033725
ZM-4-PKZ2
036098
ZM-6-PKZ2
038471
ZM-10-PKZ2
040844
ZM-16-PKZ2
043217
ZM-25-PKZ2
045590
ZM-32-PKZ2
047963
ZM-40-PKZ2
050336
1 off
Std.
pack
Notes
Euro
DG
Modules PKZ2/S-SP and trip blocks ZMR with overload relay function
1)
½
½
0.6 - 1
8 - 14
100
65
42
¾
1
1 - 1.6
14 - 22
100
65
42
½
½
1
1½
1.6 - 2.4
20 - 35
100
65
42
1
1
2
3
2.4 - 4
35 - 55
100
65
42
1½
1½
3
5
4-6
50 - 80
100
65
42
2
3
5
7½
6 - 10
80 - 140
100
65
42
3
5
10
10
10 - 16
130 - 220
100
65
42
7½
7½
20
25
16 - 25
200 - 350
100
65
42
10
10
20
–
24 - 32
275 - 425
100
65
–
10
15
30
–
32 - 40
350 - 500
100
65
–
0.4 - 0.6
5-8
100
65
42
1 off
For use
with networks with
grounded star point
Up to 27 A
600 Y/347 V AC
480 Y/277 V AC
27 – 42 A
1 off
480 Y/277 V AC
1 off
Service factor (SF)
1 off
1 off
Set value Ir on the current scale, depending on the
load factor
SF = 1.15 → Ir = 1 x In mot
SF = 1 → Ir = 0.9 x In mot
1 off
1 off
1 off
1 off
Terminal capacity of high-capacity compact starters PKZ2/ZM…/S
Main terminals
Cables Cu 75 °C, min. AWG 14, max. AWG 6
Torque 1.8 Nm
Control circuit terminals
Cables min. AWG 20, max. AWG 16 (0.5–1 mm2)
With insulated/uninsulated blade terminal, nominal size 2.8
1 off
Modules PKZ2/S-SP and trip blocks ZM
1)
Notes
½
0.6 - 1
8 - 14
100
65
42
¾
1
1 - 1.6
14 - 22
100
65
42
½
½
1
1½
1.6 - 2.4
20 - 35
100
65
42
1
1
2
3
2.4 - 4
35 - 55
100
65
42
1½
1½
3
5
4-6
50 - 80
100
65
42
2
3
5
7½
6 - 10
80 - 140
100
65
42
3
5
10
10
10 - 16
130 - 220
100
65
42
7½
7½
20
25
16 - 25
200 - 350
100
65
42
10
10
20
–
24 - 32
275 - 425
100
65
–
10
15
30
–
32 - 40
350 - 500
100
65
–
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1 off
1) Calculate
2) Specify
2010 CA08103002Z-EN
½
motor power in this range according to the rated operational current. Stated values to NEC Table 430 … 150
actuating voltage in the range 24 – 600 V 50 or 60 Hz.
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
8/34
Motor-starter combinations
for North America
Type F starter combinations
PKZMO, DILM, BK...
HPL08034EN
for North AmericaType F starter combinations
Maximum motor rating
Setting range
Alternating current HP
Overload trip
200 V
208 V
230 V
240 V
460 V
480 V
575 V
600 V
HP
HP
HP
HP
Short-circuit
release
Ir
Irm
A
A
I
Rated short-circuit
breaking capacity Icn
240 V 480 Y
600 Y
277 V 2)
347 V 2)
kA
kA
Extension terminal
Motor protective
circuit breaker
Contactor
Type
Type
Type
kA
Modules PKZM0, DIL, BK
1)
0.1 - 0.16
2.2
65
65
50
BK25/3-PKZ0
PKZM0-0,16
DILEM…(…)
0.1 - 0.16
2.2
65
65
50
BK25/3-PKZ0
PKZM0-0,16
DILM7-…(…)
0.16 - 0.25
3.4
65
65
50
BK25/3-PKZ0
PKZM0-0,25
DILEM…(…)
0.16 - 0.25
3.4
65
65
50
BK25/3-PKZ0
PKZM0-0,25
DILM7-…(…)
0.25 - 0.4
5.6
65
65
50
BK25/3-PKZ0
PKZM0-0,4
DILEM…(…)
0.25 - 0.4
5.6
65
65
50
BK25/3-PKZ0
PKZM0-0,4
DILM7-…(…)
0.4 - 0.63
8.8
65
65
50
BK25/3-PKZ0
PKZM0-0,63
DILEM…(…)
0.4 - 0.63
8.8
65
65
50
BK25/3-PKZ0
PKZM0-0,63
DILM7-…(…)
½
½
0.63 - 1
14
65
65
50
BK25/3-PKZ0
PKZM0-1
DILEM…(…)
½
½
0.63 - 1
14
65
65
50
BK25/3-PKZ0
PKZM0-1
DILM7-…(…)
¾
1
1 - 1.6
22
65
65
50
BK25/3-PKZ0
PKZM0-1,6
DILEM…(…)
¾
1
1 - 1.6
22
65
65
50
BK25/3-PKZ0
PKZM0-1,6
DILM7-…(…)
½
½
1
1½
1.6 - 2.5
35
65
65
50
BK25/3-PKZ0
PKZM0-2,5
DILEM…(…)
½
½
1
1½
1.6 - 2.5
35
65
65
50
BK25/3-PKZ0
PKZM0-2,5
DILM7-…(…)
1
1
2
3
2.5 - 4
56
65
65
50
BK25/3-PKZ0
PKZM0-4
DILEM…(…)
1
1
2
3
2.5 - 4
56
65
65
50
BK25/3-PKZ0
PKZM0-4
DILM7-…(…)
1½
1½
3
5
4 - 6.3
88
65
65
50
BK25/3-PKZ0
PKZM0-6,3
DILEM…(…)
1½
1½
3
5
4 - 6.3
88
65
65
50
BK25/3-PKZ0
PKZM0-6,3
DILM7-…(…)
3
3
7½
10
6.3 - 11
140
65
65
50
BK25/3-PKZ0
PKZM0-10
DILM9-…(…)
3
3
7½
–
9 - 12
168
65
65
50
BK25/3-PKZ0
PKZM0-12
DILM12-…(…)
3
5
10
–
10 - 16
224
50
50
–
BK50/3-PKZ4-E
PKZM0-16
DILM17-…(…)
3
5
10
–
10 - 16
224
18
18
–
BK50/3-PKZ4-E
PKZM0-16
DILM17-…(…)
5
5
10
–
16 - 20
280
18
18
–
BK50/3-PKZ4-E
PKZM0-20
DILM25-…(…)
5
7½
15
–
20 - 25
350
18
18
–
BK50/3-PKZ4-E
PKZM0-25
DILM25-…(…)
7½
10
20
–
25 - 32
448
18
18
–
BK50/3-PKZ4-E
PKZM0-32
DILM32-…(…)
Modules PKZM4, DIL, BK
3
5
10
15
10 - 16
224
65
65
50
BK50/3-PKZ4-E
PKZM4-16
DILM17-…(…)
5
7½
15
20
16 - 27
350
65
65
50
BK50/3-PKZ4-E
PKZM4-25
DILM25-…(…)
7½
10
25
30
24 - 34
448
65
65
50
BK50/3-PKZ4-E
PKZM4-32
DILM32-…(…)
10
15
30
30
32 - 40
560
65
65
50
BK50/3-PKZ4-E
PKZM4-40
DILM40(…)
10
15
30
–
40 - 52
700
65
65
–
BK50/3-PKZ4-E
PKZM4-50
DILM50(…)
15
15
40
–
50 - 56
812
65
65
–
BK50/3-PKZ4-E
PKZM4-58
DILM65(…)
15
15
40
–
52 - 58
882
65
65
–
BK50/3-PKZ4-E
PKZM4-63
DILM65(…)
Notes
2010 CA08103002Z-EN
Device for world markets IEC ≙ UL/CSA
Service factor (SF)
Set value Ir on the current scale, depending on the load factor
SF=1.15 -> Ir = 1 x In mot
SF=1.0 -> Ir = 0.9 x In mot
1) Calculate motor power in this range according to the rated operational current. Stated values to NEC
Table 430 - 150.
2) Suitable for networks with grounded star-point
Type F starter combinations do not need an upstream protective device.
For use in Canada, the switch must be fitted with an AK-PKZ0.
www.eaton.com
for North America
Motor-starter combinations
8/35
Function Blocks
DILM, ZE, ZB, Z5, ZW7
HPL08035EN
for North AmericaFunction Blocks
Rating data for approved types1)
Max. rated motor
current
Contactor
Overload relay
Type
Type
Maximum motor rating
Alternating current HP
200 V
208 V
HP
230 V
240 V
HP
460 V
480 V
HP
575 V
600 V
HP
A
Maximum short-circuit protective device for North
America
Fuse
Circuit-breaker2)
CEC or NEC
Continuous
Short-circuit
current
release
3)
A
A
Modules DIL, Z
–
–
½
½
1
DILEM-…(…)
ZE-1.0
3
15
–
–
–
¾
1
1.4
DILEM-…(…)
ZE-1.6
6
15
–
½
½
1
1½
2.3
DILEM-…(…)
ZE-2.4
6
15
–
–
1
2
3
3.9
DILEM-…(…)
ZE-4
15
15
–
1½
1½
3
–
6
DILEM-…(…)
ZE-6
20
15
–
–
2
–
–
6.8
DILEM-…(…)
ZE-9
35
15
–
2
2
5
5
7.8
DILEM-…(…)
ZE-9
35
15
–
2
3
5
5
9.6
DILEM-…(…)
ZE-12
45
–
–
–
–
½
½
1
DILM7…(…)
ZB12-1
3
25
200
–
–
¾
1
1.4
DILM7…(…)
ZB12-1,6
6
25
200
½
½
1
1½
2.3
DILM7…(…)
ZB12-2,4
6
25
200
1
1
2
3
3.9
DILM7…(…)
ZB12-4
15
25
200
1½
½
3
–
6
DILM7…(…)
ZB12-6
20
25
200
–
–
–
7½
9
DILM9…(…)
ZB12-10
25
25
200
–
3
5
7½
9.6
DILM12…(…)
ZE-12
25
25
200
–
–
7½
10
11
DILM12…(…)
ZB12-12
45
25
200
–
5
10
–
15.2
DILM15…(…)
ZB12-16
60
40
320
–
–
½
½
1
DILM17…(…)
ZB32-1
3
25
200
–
–
¾
1
1.4
DILM17…(…)
278447
6
25
200
½
½
1
1½
2.3
DILM17…(…)
ZB32-2,4
6
25
200
1
1
2
3
3.9
DILM17…(…)
ZB32-4
15
25
200
½
1½
3
–
6
DILM17…(…)
ZB32-6
20
25
200
–
3
5
7½
9.6
DILM17…(…)
ZB32-10
25
25
200
–
–
7½
10
11
DILM17…(…)
ZB32-16
40
30
320
–
5
10
–
15.2
DILM17…(…)
ZB32-16
40
30
320
–
7½
15
20
22
DILM25…(…)
ZB32-24
90
100
1200
–
10
20
25
32.2
DILM32…(…)
ZB32-32
125
125
1200
–
3
5
7½
9.6
DILM40(…)
ZB65-10
40
40
380
–
5
10
10
15.2
DILM40(…)
ZB65-16
60
60
760
–
7½
20
25
32.2
DILM40(…)
ZB65-24
90
90
1200
–
10
20
30
34
DILM40(…)
ZB65-40
125
125
1200
–
20
40
50
54
DILM50(…)
ZB65-57
200
150
2000
–
20
50
50
63
DILM65(…)
ZB65-65
200
160
2000
–
25
50
60
68
DILM80(…)
ZB150-70
250
250
2500
–
30
75
100
99
DILM95(…)
ZB150-100
400
400
3200
–
40
100
100
124
DILM115(…)
ZB150-125
500
500
4000
–
60
125
125
156
DILM150(…)
ZB150-150
600
600
4800
50
60
125
150
156
DILM185A/22(…)
Z5-160/FF225A
600 CLASS J
600
7200
60
75
150
200
192
DILM225A/22(…)
Z5-220/FF225A
800 CLASS J
800
16000
75
100
200
250
248
DILM250/22(…)
Z5-250/FF250
700 CLASS J
600
–
100
125
250
300
312
DILM300A/22(…)
ZW7-400
1000
1000
–
125
150
300
400
382
DILM400/22(…)
ZW7-400
1000
1000
–
150
200
400
500
480
DILM500/22(…)
ZW7-540
1000
600
–
Notes
1)
Devices for world markets IEC ≙ UL/CSA
Circuit-breaker -> Chapter 17
3) The electronic overload relay ZEV can alternatively be used on request.
2)
2010 CA08103002Z-EN
www.eaton.com
8/36
Motor-starter combinations
for North America
Function Blocks
NZMH...-S...-CNA, DILM..., ZB, Z5, ZW7
Rating data for approved
types
Maximum motor rating
HPL08036EN
Setting range
Max. rated
motor
current
Alternating current HP
200 V
208 V
230 V
240 V
460 V
480 V
575 V
600 V
HP
HP
HP
HP
A
Rated short-circuit
breaking capacity
Overload
trip
Circuit-breaker
Contactor
Overload
relay
Type
Type
Type
Shortcircuit
releases
480 V
600 Y
347 V1)
600 V
Ir
Irm
kA
kA
kA
A
A
I
Minimum
enclosure
volume
cm3
Module NZMH...-S...-CNA, DILM, Z
I>
M
3~
–
–
–
½
0.9
100
50
–
0.6 - 1
12.8 - 22.5
NZMH2-S1.6-CNA
DILM17-…(…)
ZB32-1
81.5
–
–
½
¾
1.3
100
50
–
1 - 1.6
12.8 - 22.5
NZMH2-S1.6-CNA
DILM17-…(…)
ZB32-1,6
81.5
–
–
¾
–
1.6
100
50
–
1 - 1.6
19.2 - 33.6
NZMH2-S2.4-CNA
DILM17-…(…)
ZB32-1,6
81.5
–
–
1
1
2.1
100
50
–
1.6 - 2.4
19.2 - 33.6
NZMH2-S2.4-CNA
DILM17-…(…)
ZB32-2,4
81.5
–
½
–
1½
2.4
100
50
–
1.6 - 2.4
32 - 56
NZMH2-S5-CNA
DILM17-…(…)
ZB32-2,4
81.5
¾
¾
2
3
3.9
100
50
–
2.4 - 4
32 - 56
NZMH2-S5-CNA
DILM17-…(…)
ZB32-4
81.5
–
1
–
–
4.2
100
50
–
4-6
32 - 56
NZMH2-S5-CNA
DILM17-…(…)
ZB32-6
81.5
1
1½
3
–
6
100
50
–
4-6
48 - 84
NZMH2-S8-CNA
DILM17-…(…)
ZB32-6
81.5
1½
2
–
5
6.9
100
50
–
6 - 10
48 - 84
NZMH2-S8-CNA
DILM17-…(…)
ZB32-10
81.5
2
3
5
7½
9.6
100
50
–
6 - 10
80 - 140
NZMH2-S12-CNA
DILM17-…(…)
ZB32-10
81.5
3
5
10
10
15.2
100
50
–
10 - 16
128 - 224
NZMH2-S18-CNA
DILM17-…(…)
ZB32-16
81.5
5
–
–
15
17.5
100
50
–
16 - 24
200 - 350
NZMH2-S26-CNA
DILM17-…(…)
ZB32-24
81.5
–
7½
15
20
22
100
50
–
16 - 24
200 - 350
NZMH2-S26-CNA
DILM25-…(…)
ZB32-24
81.5
7½
–
–
–
25.3
100
50
–
24 - 32
256 - 448
NZMH2-S33-CNA
DILM25-…(…)
ZB32-32
81.5
–
10
20
25
28
100
50
–
24 - 32
256 - 448
NZMH2-S33-CNA
DILM32-…(…)
ZB32-32
81.5
10
–
–
–
32.2
100
50
–
24 - 32
320 - 560
NZMH2-S40-CNA
DILM32-…(…)
ZB32-32
81.5
–
–
25
30
34
100
50
–
32 - 40
320 - 560
NZMH2-S40-CNA
DILM40(…)
ZB65-40
81.5
–
–
30
–
40
100
50
–
32 - 40
400 - 700
NZMH2-S50-CNA
DILM40(…)
ZB65-40
81.5
–
15
–
40
42
100
50
–
40 - 57
400 - 700
NZMH2-S50-CNA
DILM40(…)
ZB65-57
81.5
15
20
40
50
54
100
50
–
40 - 57
504 - 882
NZMH2-S63-CNA
DILM50(…)
ZB65-57
81.5
20
–
50
60
65
100
50
–
57 - 65
640 - 1120
NZMH2-S80-CNA
DILM65(…)
ZB65-65
81.5
–
25
–
–
68
100
50
–
50 - 70
640 - 1120
NZMH2-S80-CNA
DILM80(…)
ZB150-70
163
25
30
60
75
80
100
50
–
70 - 100
800 - 1400
NZMH2-S100-CNA
DILM80(…)
ZB150-100
163
–
40
75
100
104
100
50
–
70 - 100
1000 - 1750
NZMH2-S125-CNA
DILM95(…)
ZB150-100
163
30
–
–
–
92
100
50
–
70 - 100
1000 - 1750
NZMH2-S125-CNA
DILM115(…)
ZB150-100
163
40
–
100
125
125
100
50
–
100 - 125
1280 - 2240
NZMH2-S160-CNA
DILM115(…)
ZB150-125
163
–
50
–
–
130
100
50
–
125 - 150
1280 - 2240
NZMH2-S160-CNA
DILM115(…)
ZB150-150
163
–
–
125
–
156
100
50
–
125 - 150
1600 - 2500
NZMH2-S200-CNA
DILM150(…)
ZB150-150
265
50
60
–
150
154
100
50
–
120 - 160
1600 - 2500
NZMH2-S200-CNA
DILM185/22(…)
Z5-160/FF250
265
60
75
150
200
192
100
50
–
160 - 220
220 - 3080
NZMH2-SE220-CNA
DILM225/22(…)
Z5-220/FF250
265
75
100
200
250
248
100
50
50
160 - 220
350 - 4900
NZMH3-SE350-CNA
DILM250/22(…)
Z5-220/FF250
306
100
–
–
300
289
100
50
50
190 - 290
350 - 4900
NZMH3-SE350-CNA
DILM300/22(…)
ZW7-290
306
–
125
250
–
302
100
50
50
270 - 400
450 - 6300
NZMH3-SE450-CNA
DILM300/22(…)
ZW7-400
306
125
150
300
400
382
100
50
50
270 - 400
450 - 6300
NZMH3-SE450-CNA
DILM400/22(…)
ZW7-400
306
Notes
2010 CA08103002Z-EN
1)
Suitable for networks with grounded star-point
www.eaton.com
Connection system SmartWire
8/37
SWIRE-…
Description
1
2
3
4
5
XI/ON
9
13
9
8
10
7
11
12
1
2
3
4
Gateway easyNET/CANopen
Gateway PROFIBUS-DP
Gateway MODBUS
Coupling unit XI/ON with SmartWire Interface card
MicroInnovation AG,
www.microinnovation.com
5 Interface module B & R CS1011
for X20 system,
www.br-automation.com
6 SmartWire I/O module
7 DOL starter MSC-D up to 32 A
8 DOL starter MSC-D up to 15.5 A
9 SmartWire power module
10 Connection cable
11 SmartWire module for DILM
12 Reversing starter MSC-R up
to 12 A
System description
Features
With the SmartWire connection
system, switchgear can be connected
to a programmable logic controller
without the need for complex control
wiring. Plug-in SmartWire cards for
DILM and a preassembled connection
cable replace the control wiring, dramatically reducing wiring complexity
and completely eliminating wiring
errors. SmartWire also cuts the time
needed for installation, commissioning
and troubleshooting.
The PLC’s inputs and outputs are
replaced by the SmartWire module for
DILM, and no control wiring terminals
are required.
Connection to the various fieldbus
systems is through third-party
gateways or interface modules.
• Gateway
– Connects the SmartWire cards
with the fieldbus
– Supports the fieldbus standards
PROFIBUS-DP, MODBUS,
CANopen and easy-NET
– Supplies the control voltage for
the motor starter or contactor
– Supplies the supply voltage for the
SmartWire connection system
– Configuration button for automatic
addressing of the SmartWire
modules for DILM
– Supports max. 16 SmartWire
modules for DILM
• Interface of third-party manufacturers, e.g. for the XI/ON I/O system,
X20 system CS1011 interface
module
– Connection to the field buses
PROFIBUS-DP, MODBUS,
CANopen and DeviceNET
• SmartWire module for DILM
– Pluggable on contactors
– Suitable for contactors DILM7 to
DILM32 (24 V DC), DILMC7 to
DILMC32 (24 V DC), DILMP20
(24 V DC) or motor starter MSC-...
(24 V DC)
– Use the standard switchgear of
the xStart range
– Suitable for DOL and reversing
starters
– The accessories of the contactor
series can be used
– Suitable for contactor combinations with PKZ or with Z relays
– Integrated switch position
monitoring of the contactors
– Integrated mechanical switch
position display
– Actuation of the contactors
– Scanning of a potential-free
contact, e.g. NHI-E-10-PKZ0
– Electrical interlocking, e.g.
possible with reversing starters
– LED for status and diagnostic
display
– Connection to gateway or interface from third party devices
• SmartWire I/O module
– 4 digital inputs for connection of
potential-free contacts
– Power supply for the digital inputs
comes from the device
– 2 relay outputs 250 V AC
• SmartWire power module
– Supply of the 24 V DC control
voltage for actuation of contactors
DILM
– Assembly of Emergency Off
groups
– Increases the control voltage
power in the SmartWire line
• Safety engineering
– Emergency switching off disconnection as per IEC/EN 954-1,
Switching Category 3
– Central switch off of control
voltage at the gateway or
SmartWire power module
– Combination with safety-relevant
switchgear possible
2010 CA08103002Z-EN
www.eaton.com
8/38
Connection system SmartWire
SWIRE-…
HPL08038EN
Ordering
Description
Part no.
Article no.
Gateway with integrated supply for the SmartWire
module and control voltage for the switchgear.
- Connection to PROFIBUS-DP as slave.
- Transmission rate: 9.6 Kbits/s to 12 MBit/s.
- 9 pole SUB-D socket.
- Address range 1…126.
- Connection to SmartWire module as master.
- Supports 16 SmartWire modules.
Gateway with integrated supply for the SmartWire
module and control voltage for the switchgear.
- Connection to MODBUS-RTU as slave.
- Transmission rate: 9.6 to 57.6 Kbits/s.
- 9 pole SUB-D socket RS232/RS485.
- Address range 1…31.
- Connection to SmartWire module as master.
- Supports 16 SmartWire modules.
Price
See price
list
Std. pack
Notes
SWIRE-GW-DP
107027
1 off
–
SWIRE-GW-MB
118562
1 off
–
SWIRE-DIL
107028
5 off
• Take account of the max. current consumption of the contactor coils per SmartWire
line.
• Length of connection cable at the input and
the electrical interlock < 2.8 m.
• The A2 connection of the contactors must
not be linked.
• Electrical interlocking only possible via the
terminals on the module for DILM.
• Wiring sets DILM 12-XRL and PKZM0XRM12 cannot be used.
• Connection terminals for electrical
interlocking are not suitable for safety
technology.
1 off
Max. 4 power modules per SmartWire line.
1 off
Max. 4 SmartWire I/O modules per line.
Gateway
PROFIBUS-DP
MODBUS
Modules
SmartWire module for DILM
SmartWire module to assemble on the contactors
DILM(C)7…DILM(C)38, DILA…, DILMP20
- One module is necessary per contactor.
- Connection to SmartWire gateway as slave.
- Max. 16 SmartWire modules per line.
- 1 digital input for floating contact.
- Signaling contactor switch position.
SmartWire power module
Power module for suppling the control voltage.
SWIRE-PF
- Connection on SmartWire gateway as interactive 107029
station (no address).
SmartWire I/O module
4 digital inputs
2 digital relay outputs
Information relevant for export to North America
Product Standards
UL File No.
UL CCN
CSA File No.
CSA Class No.
NA Certification
2010 CA08103002Z-EN
IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05;
CE marking
E29184
NKCR
012528
2252-01
UL Listed, CSA certified
www.eaton.com
SWIRE-4DI-2DO-R
107030
Connection system SmartWire
8/39
SWIRE-…
HPL08039EN
Std. pack
Notes
SWIRE-CAB-008
107032
SWIRE-CAB-011
107033
25 off
Cable lengths: Engineering → A8/40
SWIRE-CAB-015
107034
SWIRE-CAB-025
107035
5 off
SWIRE-CAB-050
112027
SWIRE-CAB-100
107036
SWIRE-CAB-200
107037
1 off
Termination plug for last SmartWire card,
6 pole, no electrical function.
SWIRE-CAB-000
107031
25 off
–
6-core, ribbon cable, length: 100 m.
SWIRE-CAB-100M
107038
1 off
Preassembly of cable only possible with
special tool.
6-pin plug for ribbon cable.
SWIRE-CAB-CON
107039
50 off
For use with SWIRE-CAB-100M.
5 off
–
20 off
For use with DILM7…DILM15, without A2 link.
Description
Part no.
Article no.
Price
See price
list
Accessory
SmartWire connection cable1)
Length: 85 mm
Length: 110 mm
Length: 150 mm
Length: 250 mm
Length: 500 mm
Length: 1000 mm
Length: 2000 mm
Termination connector1)
–
Data cable1)
–
Plug1)
–
NHI-E with cable1)
–
NHI-E-10-PKZ0 with connection cable AWG18 blue, NHI-E-10L-PKZ0
for connection to SmartWire module for DILM.
107040
Plug-in reversing bridge2)
–
For assembling reversing starters with tool-less
plug connection
DILM12-XR
110099
Information relevant for export to North America
1)
Product Standards
UL File No.
UL CCN
CSA File No.
CSA Class No.
NA Certification
IEC/EN 60947-4-1; UL 508;
CSA-C22.2 No. 14-05; CE marking
E29184
NKCR
012528
2252-01
UL Listed, CSA certified
2)
Product Standards
UL File No.
UL CCN
CSA File No.
CSA Class No.
NA Certification
IEC/EN 60947-4-1; UL 508;
CSA-C22.2 No. 14-05; CE marking
E36332
NLRV
012528
3211-05
UL Listed, CSA certified
2010 CA08103002Z-EN
www.eaton.com
8/40
Connection system SmartWire
SWIRE-…
Engineering
Cable lengths
For connection between motor starters and contactors DILM, the cable lengths depend on the combination and assembly of the devices.
Applications
PKZ accessories
from
to
Cable length
Contactors DILM
None
(45 grid)
DILM7-…15
DILM17-…38
DILM7-…38
DILM17-…38
DILM7-…15
DILM17-…32
DILM7-…15
DILM17-…32
DILM7-…15
DILM17-…32
DILM7-…15
DILM17-…32
DILM7-…15
DILM17-…32
DILM7-…15
DILM17-…32
DILM7-…15
DILM17-…38
DILM17-…38
DILM7-…15
DILM7-…15
DILM17-…32
DILM17-…32
DILM7-…15
DILM7-…15
DILM17-…32
DILM17-…32
DILM7-…15
DILM7-…15
DILM17-…32
DILM17-…32
DILM7-…15
85 mm
85 mm
110 mm
110 mm
110 mm
110 mm
110 mm
110 mm
85 mm
85 mm
110 mm
110 mm
110 mm
110 mm
150 mm
150 mm
PKZM0 with U-/A…/NHI…/AGM…
Motor starters MSC
None
(45 grid)
PKZM0 with U-/A…/NHI…/AGM…
The cable lengths for connecting SmartWire devices depend on the combination and assembly of the devices.
Applications
Cable length
Connection from power module to SWIRE-DIL with mounting beside PKZ
Connection from power module to SWIRE-DIL with mounting beside DILM
Connection from gateway to SWIRE-DIL with mounting beside PKZ
Connection from coupling unit to SWIRE-DIL with mounting beside DILM
250 mm
150 mm
250 mm
250 mm
Magnet systems
The number of motor starters or contactors DILM that can be connected is dependant on the power consumption of the magnet systems per SmartWire line.
To increase the number of SmartWire modules that can be connected, power modules can be used.
24 V DC
Pick-up power
Holding power
2010 CA08103002Z-EN
W
W
DILM7
DILM 9
DILM12
DILM15
DILM17
DILM25
DILM32/38
3
3
3
3
4.5
4.5
12 at 24 V
0.5 at 24 V
12 at 24 V
0.5 at 24 V
12 at 24 V
0.5 at 24 V
12 at 24 V
0.5 at 24 V
www.eaton.com
Connection system SmartWire
8/41
SWIRE-…
Technical data
SWIRE-GW-DP
SWIRE-PF
SWIRE-DIL
IEC/EN 60947
EN 55011
EN 55022
IEC/EN 61000-4
IEC/EN 60068-2-27
IEC 61158
–
–
General
Standards
General
Profibus-DP
Mounting
Dimensions (w x d x h)
mm
Top-hat rail IEC/EN 60715 (35mm) or screw fixing with fixing
brackets ZB4-101-GF1 (accessories)
35 x 90 x 109
35 x 90 x 74
on DILM7…DILM38
Weight
kg
0.15
0.1
0.04
45 x 44 x 81
Terminal capacity
Solid
mm2
0.34…1.5
0.34…1.5
0.34…1.5
Flexible with ferrule
mm2
0.34…1.5
0.34…1.5
0.34…1.5
Solid or stranded
AWG
22…16
22…16
22…16
Flat-blade screwdriver
mm
3.5 x 0.8
3.5 x 0.8
3.5 x 0.8
Max. tightening torque
Nm
0.6
0.6
0.5
Operation
°C
-25 - +55
-25 - +55
-25 - +60
Storage
°C
-25 - +70
-25 - +70
-25 - +70
Ambient climatic conditions
Ambient temperature
Condensation
Prevent condensation by means of suitable measures
Relative humidity, non-condensing (IEC/EN 60068-2-30)
%
5 - 95
5 - 95
5 - 95
Air pressure (in operation)
hPa
795 - 1080
795 - 1080
795 - 1080
Ambient mechanical conditions
Protection type (IEC/EN 60529)
IP20
IP20
IP20
Pollution degree
2
2
2
Mounting position
Vertical
Vertical
As per DILM7 to DILM38
Electromagnetic compatibility (EMC)
Electrostatic discharge (IEC EN 61000-4-2, Level 3, ESD)
Air discharge
kV
8
8
8
Contact discharge
kV
–
–
–
10
10
10
Class A
Class A
Class A
kV
2
2
2
kV
2
2
2
kV
0.5 (supply cables, symmetrical)
V
10
Electromagnetic fields
(IEC/EN 61000-4-3, RFI)
Radio interference suppression (EN 55011, EN 55022)
Burst pulses
(IEC/EN 61000-4-4, level 3)
Supply cables
Signal cables
High-energy pulses (surge)
(IEC/EN 61000-4-5, level 2)
Emitted RFI (IEC/EN 61000-4-6)
V/m
10
10
Insulation resistance
Clearances and creepage distances
EN 50178, EN 60947-1, UL 508, CSA C22.2 No 142
Insulation resistance
EN 50178, EN 60947-1
Supply voltage, gateway electronics and SmartWire station electronics
Ugateway
Rated operational voltage Ugateway
V DC
24, -15 %, +20 %
–
–
Permissible range
20.4...28.8
20.4...28.8
Ripple
%
≦5
–
Supply from gateway or
power module
–
Maximum coupling unit power consumption at
24 V DC
mA
–
–
–
–
Normally 1
Normally 0.6
–
–
Voltage dips (IEC/EN 61131-2)
ms
500
(typically 100 for gateway +
typically 25 per SmartWire
module)
10
Heat dissipation at 24 V DC
W
Normally 6
Protection against polarity reversal
Yes
Short-circuit protection, SmartWire side
Yes
2010 CA08103002Z-EN
www.eaton.com
8/42
Connection system SmartWire
SWIRE-…
SWIRE-GW-DP
SWIRE-PF
SWIRE-DIL
24, -15 %, +20 %
(Derating from > 40 °C)
20.4…28.8,
at 45 °C: 21…28.8,
at 50 °C: 21.6…28.8,
at 55 °C: 22.2…27.6
Normally 3
Supply from gateway or
power module
Supply from gateway or
power module
General
Supply voltage UAUX (supply voltage for switching SmartWire elements,
e.g. contactor coils)
Rated operational voltage UAUX
V DC
Permissible range
V DC
Input current UAUX at 24 V DC
A
24, -15 %, +20 %
(Derating from > 40 °C)
20.4…28.8,
at 45 °C: 21…28.8,
at 50 °C: 21.6…28.8,
at 55 °C: 22.2…27.6
Normally 3
Ripple
%
≦5
≦5
–
Voltage dips (IEC/EN 61131-2)
ms
10
10
–
No, external fuse
3 A or FAZ-Z3
No, external fuse
3 A or FAZ-Z3
–
–
Protection against polarity reversal
Short-circuit protection, SmartWire side
LED indicators
Operational
Ready: green
–
Ready: green
Power supply, SmartWire contactors
UAux: green
UAux: green
–
PROFIBUS-DP status
PROFIBUS-DP: green
–
–
SmartWire status
SmartWire: green
–
above Ready
Output status
–
–
–
Connection floating contacts
Number
Rated voltage (internal supply)
Input current at “1” signal, typically
Ue
–
–
1
V DC
–
–
17
mA
–
–
5
–
–
No
–
–
< 2.8
Potential isolation
Max. cable length
m
PROFIBUS-DP
Terminal type
SUB-D 9-pole, socket
–
–
Station address
1 … 125
–
–
Address setting
DIP switches
–
–
–
–
Bus protocol
PROFIBUS-DP
slave
PROFIBUS-DP
–
–
Bus Terminating Resistors
can be connected via plug
–
–
Baud rate
Automatic, up to 12 Mbits/s
–
–
Terminal type
Plug, 6-pole
Plug, 6-pole
Plug, 6-pole
Data/power cable
6-core ribbon cable
6-core ribbon cable
6-core ribbon cable
Max. 4
Max. 4
Max. 4
Bus termination
No
Plug connectors
Plug connectors
Station address
Automatic assignment
None
1…16
Station
max. 126 PROFIBUS
stations
None
Max. 4 SmartWire cards per
line
None
Max. 16 SmartWire cards per
line
automatically via SmartWire
From UAUX power supply
No
No
No
From UGateway power supply
No
No
No
SmartWire master
no SmartWire station
SmartWire slave
Write switch
–
–
Read status information
–
–
Normally 20 ms for all
stations
Normally 10 ms per station
Potential isolation
From UAUX power supply
Yes
From UGateway power supply
Yes
To SmartWire
Yes
Function
SmartWire
Maximum cable length, SmartWire system
Address setting
m
Potential isolation
Function
Data transfer time, SmartWire system
2010 CA08103002Z-EN
www.eaton.com
Connection system SmartWire
8/43
SWIRE-…
SWIRE-4DI-2DO-R
SWIRE-GW-MB
General
Standards
General
Dimensions (w x d x h)
mm
IEC/EN 60947, EN 55011, EN 55022,
IEC/EN 61000-4, IEC/EN 60068-2-27
Tophat rail IEC/EN 60715 (35 mm) or screw fixing with fixing brackets
ZB4-101-GF1 (accessories)
35 x 90 x 74
35 x 90 x 109
Weight
kg
0.12
0.15
Solid
mm2
0.5…1.5
0.5…1.5
Flexible with ferrule
mm2
0.5…1.5
0.5…1.5
Solid or stranded
AWG
22…16
22…16
Flat-blade screwdriver
mm
3.5 x 0.8
3.5 x 0.8
Max. tightening torque
Nm
0.6
0.6
Operation
°C
-25 - +55
-25 - +55
Storage
°C
-25 - +70
-25 - +70
Mounting
Terminal capacity
Ambient climatic conditions
Ambient temperature
Condensation
Prevent condensation by means of suitable measures
Relative humidity, non-condensing (IEC/EN 60068-2-30)
%
5 - 95
5 - 95
Air pressure (in operation)
hPa
795 - 1080
795 - 1080
Ambient mechanical conditions
Protection type (IEC/EN 60529, EN50178, VBG 4)
IP20
IP20
Pollution degree
2
2
Mounting position
Vertical
Vertical
Electromagnetic compatibility (EMC)
Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD)
Air discharge
kV
8
8
Contact discharge
kV
–
–
10
10
Class A
Class A
Electromagnetic fields (IEC/EN 61000-4-3, RFI)
V/m
Radio interference suppression (EN 55011, EN 55022)
Burst pulses (IEC/EN 61000-4-4, level 3)
Supply cables
kV
2
2
Signal cables
kV
–
2
power pulses (surge) (IEC/EN 61000-4-5, level 2)
kV
0.5 (supply cables, symmetrical)
Emitted RFI (IEC/EN 61000-4-6)
V
10
10
Insulation resistance
Clearances and creepage distances
EN 50178, EN 60947-1, UL 508, CSA C22.2 No 142
Insulation resistance
EN 50178, EN 60947-1
Supply voltage, gateway electronics and SmartWire station
electronics Ugateway
Rated operational voltage Ugateway
V DC
–
24, -15 %, +20 %
20.4...28.8
Ripple
%
Supply from gateway or power
module
–
Maximum gateway current consumption at 24 V DC
mA
–
Voltage dips (IEC/EN 61131-2)
ms
–
500 (normally 100 coupling unit +
normally 25 per SmartWire card)
10
Heat dissipation at 24 V DC
W
–
Normally 6
Permissible range
Protection against polarity reversal
≦5
Yes
Short-circuit protection, SmartWire side
–
Yes
Power supply UAUX (power supply for switching the
SmartWire slaves, e.g. contactor coils)
Rated operational voltage UAUX
V DC
–
24, -15 %, +20 % (Derating from > 40 °C)
Permissible range
V DC
–
Input current UAUX at 24 V DC
A
–
20.4…28.8, at 45 °C: 21…28.8,
at 50 °C: 21.6…28.8,
at 55 °C: 22.2…27.6
Normally 3
Ripple
%
–
≦5
Voltage dips (IEC/EN 61131-2)
ms
–
10
V
–
Yes
–
No, external 3 A fuse or FAZ-Z3
Protection against polarity reversal
Voltage
Short-circuit protection, SmartWire side
Yes
Us
2010 CA08103002Z-EN
www.eaton.com
8/44
Connection system SmartWire
SWIRE-…
SWIRE-4DI-2DO-R
SWIRE-GW-MB
LED indicators
Operational
Ready: green
Ready: green
Power supply, SmartWire contactors
–
UAux: green
MODBUS status
–
MODBUS: yellow
SmartWire status
–
SmartWire: green
Output status
Q1, Q2: green
–
Connection floating contacts
Number
Rated voltage (internal supply)
Ue
Input current at “1” signal, typically
4
–
V DC
17
–
mA
5
–
–
Yes
< 2.8
–
Potential isolation
Max. cable length
m
MODBUS
Terminal type
–
SUB-D, 9 pole, socket RS232/RS485
Station address
–
1 … 31
Address setting
–
DIP switches
–
Yes
–
Yes
–
Yes
Function
–
Bus protocol
–
MODBUS-RTU
Slave
MODBUS-RTU
Bus Terminating Resistors
–
can be connected via plug
Baud rate
–
Adjustable up to 57.6 (9.6/19.2/38.4)
kbit/s
Terminal type
Plug, 6-pole
Plug, 6-pole
Data/power cable
6-core ribbon cable
6-core ribbon cable
Max. 4
Max. 4
Bus termination
Plug connectors
No
Station address
1…16
Automatic assignment
Station
Max. 4 SmartWire modules per line.
Max. 16
Address setting
automatically via SmartWire
None
No
No
No
No
SmartWire slave
SmartWire master
Write switch
Normally 20 ms for all stations
–
Read status information
Normally 10 ms per station
–
4000
–
Potential isolation
From UAUX power supply
From UGateway power supply
To SmartWire
SmartWire
Maximum cable length, SmartWire system
m
Potential isolation
From UAUX power supply
From UGateway power supply
Function
Data transfer time, SmartWire system
Relay outputs
Rated impulse withstand voltage
Uimp
V AC
Overvoltage category/pollution degree
III/3
Rated insulation voltage
Ui
V
250
–
Rated operating voltage
Ue
V
250
–
A
30
–
380/400 V
A
10
–
AC-15, 250 V
Ie
A
3
–
DC-12, 30 V
Ie
A
3
–
Ith
A
6
6
A gG/gL
10
–
Making capacity
Breaking capacity
Rated operational current
Conventional thermal current
Short-circuit rating without welding
max. fuse
2010 CA08103002Z-EN
www.eaton.com
Motor-starter combinations
8/45
DOL starters, reversing starters
MSC-D, MSC-R, MSC-DE(A)
Standards
IEC/EN 60947-4-1, VDE 0660
UL 508 (please enquire)
CSA C 22.2 No. 14 (please enquire)
90
Uimp
Overvoltage category/pollution
degree
Rated operating voltage
Further technical data
V AC
º
Rated impulse withstand voltage
º
Main contacts
90
90
º
Mounting position
º
General
90
DOL starters, reversing starters
6000
III/3
Ue
Motor protective circuit breaker
PKZM0, PKE
Contactors DILM
V
230 - 415
→ Chapter 7
→ Chapter 5
Dimensions
DOL starters
MSC-D-…-M7[…15]…
MSC-D-…-M17[…32]…
67
46
46
67
228
180
180
6
95
45
45
97.4
123.4
MSC-D-…-M7[…15]BBA…
MSC-D-…-M17[…32]BBA…
67
67
a
95
200
180
60
60
200
180
60
60
40
40
a
45
45
97.4
10
10
35
35
63
63
2010 CA08103002Z-EN
www.eaton.com
8/46
Motor-starter combinations
DOL starters, reversing starters
MSC-DE(A), MSC-R
DOL starters, reversing starters
Reversing starters
MSC-R-…-M7[…12]…
MSC-R-…-M17[…32]…
67
46
46
67
114
228
180
180
6
95
90
90
97.4
123.4
MSC-R-…-M7[…12]BBA…
MSC-R-…-M17[…32]BBA…
67
67
a
90
95
60
60
114
180
180
60
60
40
40
a
90
97.4
10
10
35
35
63
63
DOL starters
MSC-DE(A)-...-M17[...32]...
102
102
97
97
242
189
196
78
50
MSC-DE(A)-...-M7[...12]...
45
45
128
2010 CA08103002Z-EN
www.eaton.com
Connection system SmartWire
8/47
SWIRE-…
Modules
4
38
SWIRE-DIL
45
50
12
70
SWIRE-PF , SWIRE-4DI-2DO-R
110
90
102
7.5
4.5
66
74
M4
7.5
35.5
Gateways
SWIRE-GW-DP..., SWIRE-GW-MB
110
90
4.5
M4
7.5
35.5
102
7.5
105
109
2010 CA08103002Z-EN
www.eaton.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement