ridgid sales event
RIDGID SALES EVENT
Prices in effect until November 30, 2016
Industrial & Construction Safety, Fasteners, Tools, Abrasives, Chemicals and Shop Supplies
BIGGEST SALE EVER
FLYER - FALL 2016
We are BC’s Largest Stocking
RIDGID® Distributor
Model 460-6
Features:
Model 460-6 Optimized base layout to maximize
working area, convenient lug to clamp the weld
ground, rugged leg chain for the tough demands
and a durable tool tray
Specifications:
Pipe Capacity 1/8 - 6", Weight 42.75 lbs.
59-36273
533
$
.00
ea
Model 460-12
Features:
All the features of the 460-6 but a capacity of 12"
and an adjustable rear leg.
LIGHTWEIGHT
Specifications:
Pipe Capacity 1/8 - 12", Weight 60.75 lbs.
Portable TRISTAND® Chain Vises
59-36278
811
•Each TRISTAND pipe vise features integral folding legs
for easy transport and setup, tool hangers and a base
which overhangs the front legs for clear tool swing.
238-P Powered Soil Pipe Cutter
$
.00
ea
•Model 238-P Powered Soil Pipe Cutter cuts cast iron pipe
quickly and easily in tight spaces. The 238-P is designed to
cut up to 8" soil pipe when driven by an impact driver or 4"
with the included ratchet.
Features: Dual Powered - Operates using a 1/2" square
drive impact driver or ratchet. High Capacity - Cuts 8"
diameter soil pipe when used with an impact driver
(minimum 200 ft-lbs) or 4" manually. Compact - The 11.5"
(29.5 cm) length, removable handle, low profile cutter
wheels and compact design fits into tight places in both
overhead and below grade applications. Lightweight - At
13.5 pounds mounting the tool in difficult places is easy.
Easy Set-Up - Articulating outward facing chain hooks lay
on the pipe to simplify latching Clean Cut - Two directional
operation allows scoring of the pipe for a clean cut. Durable
- patent pending torque limiter helps protect the tool from
overloading.
Specifications:
Ratchet
1 1/2" - 4" No-Hub Soil Pipe
2" - 4" Service Weight Soil Pipe
2" - 4" Clay Pipe
4" Concrete Pipe
Impact
1 1/2" - 8" No-Hub Soil Pipe
2" - 8" Service Weight Soil Pipe
2" - 8" Clay Pipe
4" - 6" Concrete Pipe
Transportable Pipe Beveller
•The B-500 Transportable Pipe Beveller produces high
quality bevels in 45 seconds* without flames or sparks.
The compact design quickly mounts to pipe 4" and up
with a maximum wall thickness of 1/2", and creates
consistent bevels in a single pass.
•The RP 340 press tool has a 4" capacity and weighs only
8.3 pounds. It features a 270° rotating swivel barrel, perfect
for getting at hard-to-reach connections. An available 18V
Advanced Lithium 4 battery helps the RP 340 achieve more
than 400 presses per charge, and it has an industry-leading
service interval of 42,000 cycles. An optional AC power
adapter can further maximize uptime job site to job site.
59-42878
59-49298
59-43358
779
$
.00
ea
RP 340 Press Tool - 4"
4,199
$
.00
ea
3,989
$
.00
ea
1 800 665 BOLT (2658) | raiderhansen.com
INDUSTRIAL & CONSTRUCTION
BIGGEST SALE EVER
Cutter Wheels for Pipe and Tubing
Prod. No.
Material
For Cutters
SALE (Each)
59-44185
Steel & Ductile
360/820
59-44190
Stainless Steel
360/820
59-33100
Steel & Ductile
2A/42A/44S
59-33120
Steel & Ductile
3S/4S/44S
59-33160
Aluminum & Copper
10/15/20
59-33165
Steel
10/15/20
59-33170
Aluminum & Copper
154/156
59-33185
Aluminum & Copper
150/151/152/153
59-74720
PE/PB/PP
151/152/153
$29.99
$38.99
$13.99
$19.99
$9.49
$9.99
$9.99
$9.49
$16.49
Hand Threader Pipe Dies
•High Speed for Superior Finish. These dies fit 12R, 11R, 00R,
111R, 0R, 30A, 31A die heads. Dies are also available in
alloy steel, stainless steel, PVC, reversible and left
hand styles.
We Stock a Big Inventory and Variety
of RIDGID Cutter Wheels - Call Us!
Prod. No.
Description
Size
SALE (Each)
59-37870
12R HS
1/2" NPT
59-37875
12R HS
3/4" NPT
59-37880
12R HS
1" NPT
59-37885
12R HS
1-1/4" NPT
59-37890
12R HS
1-1/2" NPT
59-37895
12R HS
2" NPT
$66.99
$66.99
$79.99
$79.99
$99.99
$99.99
Bevelling and Grooving
Dies Available - Call Us!
811A Quick Opening Die Head
Threading Machine Pipe Dies
•Genuine High Speed dies are made in RIDGID’s Ohio
manufacturing facility. Also available from stock are bolt
dies, pipe grooving dies and pipe beveling dies for your
RIDGID threading machine.
Prod. No.
Description
59-47760
Universal HS 1/4" - 3/8" NPT
59-47765
Universal HS
1/2" -3/4" NPT
Universal HS
1" - 2" NPT
59-47770
Size
59-47785
Uni HS Stainless 1/2" - 3/4" NPT
59-47790
Uni HS Stainless
1" - 2" NPT
59-97065
499
$
.00
ea
Set of Chuck Jaws
Nu-Clear
Thread Cutting Oil
Extreme
Thread Cutting Oil
59-44090
59-70835
59-74012
SALE (Each)
$233.00
$233.00
$233.00
$233.00
$233.00
•For Model 300 Power Drive
399
$
.00
•1 Gallon
32
$
/set
•1 Gallon
46
.99
$
ea
.99
ea
920 Roll Groover
•The RIDGID® 920 Roll Groover takes grooving to a whole
new level. With a capacity range of 2"-24" diameter pipe,
the 920 has the largest capacity of any RIDGID roll groover.
The 920 mounts to the RIDGID 300 Power Drive for use
in the field or shop. Also available is the RJ624 Large
Diameter Pipe Support for grooving pipe up to 24"
in diameter, a perfect complement to the 920 Roll Groover.
59-95782
12,599
$
2
.00
ea
raiderhansen.com
Model 975 Combo Roll Groover
•The new, Model 975 Combo Roll Groover is two tools in
one! Like other RIDGID® groovers, the 975 mounts on the
RIDGID 300 Power Drive for machine grooving jobs, but
it is also designed to manually groove in-place pipe.
59-25638
1,119
$
.00
ea
Model 916 Power-Driven
Roll Groover
•Standard Equipment:
One 1 1/4"- 6" Roll Groove Set for steel
(1 1/4"-6" schedule 10, 1-1/4"-3" schedule 40)
59-45007
1,295
$
.00
ea
918 Roll Groover On 300 Base
•The RIDGID® Model 918 Hydraulic Roll Groover features
a powerful 15-ton hydraulic ram in a compact, easy to
transport unit. With one man set-up and operation, the
918 is the ideal groover for job site requirements. The 918
mounts quickly to RIDGID 300 power drive, 535, 1822, or
1224 Threading Machines. Designed to provide maximum
efficiency, the 918 is capable of grooving up to 12"
Schedule 10 and 8" Schedule 40 standard wall pipes.
Model 300 Power Drive (Complete)
59-48297
59-15682
4,595
$
.00
ea
•RIDGID® speed chuck.
•Reversible 1/2 HP universal motor.
•Ideal for use with RIDGID roll groovers.
5,075
$
.00
ea
918 Roll Groover
•The RIDGID Model 918 Hydraulic Roll Groover features
a powerful 15-ton hydraulic ram in a compact, easy to
transport unit. With one man set-up and operation, the
918 is the ideal groover for job site requirements. The 918
mounts quickly to RIDGID 300 power drive, 535, 1822, or
1224 Threading Machines. Designed to provide maximum
efficiency, the 918 is capable of grooving up to 12"
Schedule 10 and 8" Schedule 40 standard wall pipes. Roll
Set changeout is accomplished in seconds.
Features: Compact lightweight design allows for easy
transport. Extensive grooving capacity for a wide range
of applications. Rugged, durable housing enables unit to
withstand harsh use. Two-stage pump plus 15 ton ram
permit quick and smooth operation. Quick easy set-up. Easy
rollset changeout. Specifically designed groove and drive
rolls produce consistent, accurate grooves throughout the
capacity range.
Specifications: Capacity: 1" - 12" Sch. 10 Steel, Stainless Steel
1" - 8" Sch 40 Steel 1" - 2" Sch 40 Stainless Steel 2" - 6" Copper
(Type K, L, M, & DWV) 2" - 6" Sch 60 PVC 1 1/2", 2 1/2"-4"
Sch 80 PVC Weight: 81 lbs. (37 kg)
59-47222
4,159
$
.00
ea
VF99 Folding V-Head Pipe Stand
Model 300 Compact Threading Machine
•Lightweight, portable design.
•Pipe Capacity 1/8" - 2" (3mm-50mm).
•Bolt Capacity 1/4" - 2" (6mm-50mm).
59-67182
7,209
$
.00
ea
•Locking ring allows for quick vertical height adjustments.
•The legs fold on the VF-99 Folding Pipe Stand (Cat. No.
22168) making it easy to transport and require 70% less
area to store!
Specifications: Height 28 - 51", Max. Pipe Capacity 12", Max. Weight
Capacity 2,500 lbs, Weight 24 lbs.
59-22168
117
$
.00
ea
NEW
Model 425 Portable TRISTAND®
Chain Vise
•Each TRISTAND pipe vise features integral folding legs for
easy transport and setup, tool hangers and a base which
overhangs the front legs for clear tool swing.
Features: Model 425 features “quick grab’’, self-locking latch
and carrying handle for ease of transport. Reversible 1/2 HP
universal motor.
HC300 Hole Cutting Tool
59-16703
59-76777
432
$
.00
ea
•Ideal for use with RIDGID® roll groovers.
•Offers great features that translate into unparalleled field
and shop performance. Ergonomic Design - With all controls
at the operator’s fingertips, the tool has been designed for
maximum productivity.
•Securely grips plastic pipe from 3" - 8" (80mm –
220mm) allowing force to be applied confidently in all
directions. Simplifies the installation and maintenance
of large diameter plastic pipe applications.
59-42478
2,026
$
STRAPLOCK Pipe Handle
.00
ea
40
$
.95
ea
3
SeeSnake® CS6 Digital Recording
Monitors with 2 Batteries and 1 Charger
•Capture still images and video clips directly to a USB
thumbdrive and generate high quality multi-media reports.
Both monitors have the same features and are compatible
with all SeeSnake camera reels. The CS6 mounts to the
SeeSnake MAX rM200 docking handle for easy transport
and storage. The CS6Pak mounts to the Compact2 and can
be quickly detached for convenient placement and storage.
The CS6 and CS6Pak have the same great software and
reporting capabilities in two distinct form factors.
Includes: Set of (2) 2.0Ah Batteries & (1) 120V Charger.
NEW
59-45143
3,035
$
SeeSnake® MAX rM200
Inspection Camera Kit Probe
•Next generation push cable and improved reel mechanics
make inspections easier than ever allowing you to push
further with less effort. Ultra compact camera head allows
easier passage through tight turns while still illuminating
pipes up to 6". Docking system allows you to attach
monitors for easy transport and connected viewing 200'
cable length. 1-5" to 6" line capacity.
59-42348
7,815
.00
$
ea
.00
ea
NEW
MR10 Magnetic Locator
SeeSnake® Compact2 Camera System
•Big performance in a compact, durable package.
Designed to inspect lines from 1.5" to 6" (3.8 cm to
15.2 cm), the Compact2 includes a 100' (30 m) push
cable, 1" (2.5 cm) self-leveling camera head and sonde.
Features: Quick-release CCU docking system for fast,
efficient job set-up. Flexible push cable for pushing
ease through multiple tight turns. Self-leveling camera
for a crisp, clear, in-pipe image that is always upright.
Built-in sonde to locate a point of interest during the
pipe inspection.
•Quickly locate buried iron or steel objects such as:
valve/curb boxes, manhole covers, cast iron pipes,
steel enclosures, well casings, reinforced septic
tanks, survey pins.
•Ergonomic rugged design includes carrying case
and batteries.
•Highly sensitive instrument with audio and visual
feedback.
•AutoNull feature blocks out nearby metallic
interference such as an automobile or
chain link fences.
59-48113
59-53068
8,779
$
1,169
.00
$
ea
.00
ea
SR-24 Line Locator with Bluetooth®
and GPS
CS10 Digital Recording Monitor
with 2 Batteries and 1 Charger
SeekTech ST-305 Line Transmitter
•The 5 watt SeekTech ST-305 Line Transmitter lets you
energize metallic lines for tracing.
Features: Lightweight and compact transmitter that delivers
up to 5 watts of power. Can transmit two frequencies
simultaneously. Audio feedback confirms a good circuit
before beginning a trace.
•The SR-24 is a precision utility locating instrument with
GPS and Bluetooth® technology for easy integration with
external data capture devices.
•The SR-24’s omni-directional antennas capture the
complete signal field, making it easy to acquire the signal
and trace its path. The receiver displays the utility's
position and direction on the display, providing an intuitive
locating experience. For added confidence, audio and visual
warnings notify the operator if the shape of the signal field
is being distorted so that appropriate action can be taken to
avoid mis-marking the utility’s position.
Features: Large Display, Omni-directional Antennas, Built-In
GPS, Bluetooth Technology, Smartphone/Tablet App. Can
trace any frequency from 10 Hz to 35,000 Hz.
59-39338
59-21898
59-44473
•The RIDGID® SeeSnake® CS10 Monitor combines RIDGID
durability with the easiest to use Digital Recording Monitor
in the industry. One touch recording allows you to record
snapshots and video to a USB Thumbdrive, and then hand
it directly to your customer.
Includes: Set of (2) 2.0Ah Batteries & (1) 120V Charger.
5,479
$
4
.00
ea
raiderhansen.com
1,169
$
.00
ea
3,399
$
.00
ea
BIGGEST SALE EVER
AC Adapter
1 Battery 18V
1 Charger + L10
2 Batteries 18V
1 Charger + L10
59-45363
59-44848
59-44853
299
$
.00
ea
349
$
535
.00
$
ea
.00
ea
The RIDGID® Model KJ-3100 portable water
jetter gives you 3000 psi (205bar) actual
working pressure to handle large commercial
and industrial applications. This jetter propels
a highly flexible and lightweight hose through
2" (50 mm) to 10" (250 mm) lines blasting
through sludge, soap, grease, and sediment
blockages. As you pull the hose back, it
power scrubs the line flushing debris away
and restoring drain lines to their full, freeflowing capacity – all without the use of
harmful chemicals.
Easy to use: Thrust propels the hose down the line.
You simply guide the hose into the drain.
High Quality: Duplex pump with corrosion-resistant, forged
brass head. New pressure control valve allows quick and
easy pressure adjustment.
Dependable: Reduced number of fittings, hoses and parts
minimizes leaks and down time keeping you on the job.
Versatile: Optional power washer package cleans cables,
tools and other heavily soiled equipment.
CSA approved.
Approved to UL standards (NRTLC).
Features:
Powerful: Actual working pressure of 3000 psi (205bar) and
flow of 5.5 GPM (21 l/min) for fast, effective cleaning of
lines.
Lightweight Hose: Hose with nylon braid provides
significant weight reduction and increased flexibility – all
without reducing strength. Allows the thrust to propel the
hose further down the line.
Complete: With the Model KJ-3100’s removable hose reel,
there is no need to purchase expensive portable hose reels.
Standard packages come equipped to handle indoor and
remote applications.
Convenient: Completely remove the hose reel to ease
loading onto service trucks. Simply rotate the hose reel
forward to gain full access to the engine’s gas tank and
air filter.
Maneuverable: In the heavy-duty 3000 psi (205bar)
jetter category, the RIDGID KJ-3100 is one of the most
maneuverable jetters on the market. The unit, on its unique
two-wheeled cart, easily fits through standard size doors
and can negotiate tight turns with the greatest of ease.
Pulse Action: Activate the Model KJ-3100’s pulse action to
easily negotiate difficult bends and traps.
Quality & Dependability: Triplex pump with corrosionresistant, forged brass head. Gear reducer allows pump to
run at slower (optimal) speed. Reduced number of fittings,
hoses and parts minimizes leaks and downtime – keeping
you on the job.
Versatile: Power wash package and chemical injector system
cleans cables, tools, and other heavily soiled equipment.
Quick Start: 16 HP Recoil start gasoline engine starts easily.
Features: ON/OFF switch; fuel shutoff; choke and throttle
controls; easy access oil fill and dip stick.
59-62597
59-37413
KJ-1350 Water Jetter For 1-1/4" to 4" (32-100mm) Drain Lines
This jetter propels a highly flexible hose through 1-1/4" to 4" lines – blasting through sludge,
soap and grease blockages. As you pull the hose back, it power scrubs the line, flushing debris
away and restoring drain lines to their free-flowing capacity.
Features:
Powerful: Actual working pressure of 1350 psi and flow of
1.4 GPM for fast, effective cleaning of lines.
Pulse Action: Activate the Model KJ-1350's plus action
to easily negotiate difficult bends and traps. The Model
KJ-1350-2 has a second level of pulse
Portable and Compact: The optional H-10 Cart rolls the
jetter and hose to the job site. Jetter and hose reel are
easily removed from the cart in seconds for hard to reach
drains or remote storage. The compact cart offers a
retractable handle and swivel hose reel minimizing storage
space. Optional adapter allows the KJ-1350 to be mounted
on the upright H-30 Cart.
Electrical Requirement: The 1.5 HP motor draws a
maximum of 14 Amps and can run on most standard
115 Volt circuits.
KJ-3100 Water Jetter for 2"
(50 mm) to 10" (250 mm)
Drain Lines
3,655
$
.00
ea
7,600
$
.00
ea
5
BIGGEST SALE EVER
PIPE WRENCHES
Heavy-Duty Straight Pipe Wrenches
•Straight Pipe Wrenches have a sturdy, ductile-iron housing
and an I-beam handle with a full floating forged hook jaw,
featuring self-cleaning threads with replaceable hook and
heel jaws.
•Heavy-duty pipe wrenches comply with federal
specifications GGG-W65IE, Type II, Class A.
Size
Part No.
SALE (Each)
6"
59-31005
10"
59-31010
12"
59-31015
14"
59-31020
18"
59-31025
24"
59-31030
36"
59-31035
60"
59-31045
$25.49
$32.49
$36.99
$40.99
$60.99
$96.49
$208.49
$471.99
Aluminum Straight Pipe Wrenches
•RIDGID® Aluminum Pipe Wrenches provide professional
strength in lightweight aluminum. The Aluminum Straight
Pipe Wrench offers the same durability and ease-of-use
found in all RIDGID heavy-duty wrenches.
Size
Part No.
SALE (Each)
10"
59-31090
12"
59-47057
14"
59-31095
18"
59-31100
24"
59-31105
36"
59-31110
48"
59-31115
$55.99
$65.49
$69.99
$86.49
$136.99
$248.99
$491.99
Hook & Heel Jaws for HD Pipe Wrenches
•Always Insist On Genuine RIDGID® Parts.
Size
Hook Jaw
6"
59-31555
8"
59-31580
10"
59-31605
12"
59-31630
14"
59-31655
18"
59-31670
24"
59-31695
36"
59-31720
48"
59-31745
SALE
(Each)
$15.49
$15.49
$19.49
$22.99
$27.49
$37.99
$58.49
$126.99
$187.99
Heel Jaw
59-31560
59-31585
59-31610
59-31635
59-31635
59-31675
59-31700
59-31725
59-31750
Chain Wrenches
•A double jaw gives fast, ratchet-like action in
either direction.
•The heavy-duty model has replaceable alloy steel jaws.
•The light-duty model has a one- piece forged alloy
steel handle and jaw. Ideal for use in close quarters.
Size
Part No.
SALE (Each)
C12 CHAIN
59-31310
C14 CHAIN
59-31315
C18 CHAIN
59-31320
C24 CHAIN
59-31325
C36 CHAIN
59-31330
$69.99
$88.49
$131.99
$146.99
$299.49
6
raiderhansen.com
Strap Wrenches
•Strap Wrenches are best for any polished pipe.
•Strong, woven nylon strap gives tight grip.
•Two models available with special strap for plastic pipe.
2
Strap
Length
24"
Strap
Width
1-1/8"
59-31350
5
29-1/4"
1-3/4"
59-31360
Model No.
Part No.
SALE
(Each)
$55.99
$91.49
Spud Wrench
•12" Spud Wrench features narrow jaws to
fit into tight places.
•Smooth, toothless jaws ideal for square or
rectangular stock.
59-31400
55
$
.99
ea
SALE
(Each)
$7.49
$8.49
$11.49
$14.99
$14.99
$19.49
$28.99
$49.99
$80.49
K-3800 Drum Machine
K-45AF-5 Autofeed
Drain Cleaning Machine (Kit)
•The K-45 family of drain guns are the professionals choice
for cleaning small secondary drain lines from 3/4" to
2-1/2". Available in manual and AUTOFEED versions.
•Variable speed power unit rotates cable 0-600 RPMs.
•Two-piece twist lock canister with interchangeable inner
drum - Makes cable change-out simple; easy to match the
right cable for the job.
59-36003
709
$
•For 3/4" to 4" (19-100mm) Drain Lines
•A powerful, easy to transport, versatile machine for cleaning
indoor drains. Requires minimal set-up to clean sink lines,
floor drains and roof vents.
•Rugged, corrosion-resistant molded cable drum won’t dent
or rust. The drum tilt adjusts for proper cable feed angle.
Inner-drum guards against cable flip-over inside the drum.
Includes:
K-3800 Machine with Std. Equip: C-45, 1/2" x 75' (12 mm x 22.8 m)
Cable, T-102 Funnel Auger, T-142 Knife Blade Cutter, T-107 Spade
Cutter, A-12 Pin Key, Pair of Gloves
•For 3" to 6" (75-150mm) Drain/Sewer Lines Superior
maneuverability and a small footprint allow easy access to
tight work areas. The K-6200 comes equipped with either
IC (Inner Core) cable or HD (Heavy Duty Inner Core) cable.
Recommend 5/8" cable for 3" to 6" drain lines up to 200'.
59-53122
59-95732
1,715
.49
K-6200 Drum Machine
$
/kit
3,550
$
.00
ea
.00
ea
K-1500 Sectional Machine
•For 2" to 8" (50-200mm) drain and
sewer lines.
•The finest all-around sewer and drain
cleaning machine. One man can easily
clean the heaviest blockages – indoors or
out. High-speed cleaning gets the job done
faster and better.
•Wheels to the job site – sets up fast, cleans up fast.
•Low-profile “B’’ frame design will fit most crawl spaces. Loads and
unloads from truck easily. Upright “A’’ frame features cable carrier
storage during transport, ideal for in-house applications.
•Equipped to run, easy to handle, 15' (4.6 m) sections of 1 1/4" (32 mm)
cable to clean 3" to 8" (32 m to 200 mm) lines to 200’ (61 m).
59-23717
3,860
$
.00
ea
K-1 Combination Auger
•The K-1 Combination Auger provides an all-in-one solution
for removing blockages from urinals and shower drains.
Included Accessories: A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 1-1/4"
(32 m) (C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers
Nine-Piece 1-1/4" Tool Set: T-1 Straight Auger, T-3 Funnel Auger, T-6 Retrieving Auger, T-8 Grease Cutter,
T-13 Sawtooth Cutter, T-50-1 Sharktooth Cutter, A-2864 Hex Key, A-3516 Hex Key, A-3 Tool Box
59-46683
90
$
.99
ea
Drain Cutters & Augers
Sewer Cables
Part No.
Model
Cable Type
Length
Fits Machine
59-62225
C-1
5/16" w/Bulb Auger
25'
C-26, K-39, K-40, K-50
59-56787
C-21C
5/16" IC Drop Head
25'
C-26, K-39, K-40, K-50
59-62260
C-6
3/8" w/Male Coupling
35'
K-39, K-40, K-50
59-62270
C-8
5/8" Open Wind
7.5'
K-50, K-60
59-62275
C-10
7/8" Open Wind
15'
K-60, K-75
59-62280
C-11
1-1/4" Open Wind
15'
K-1500, K1500SP
59-37847
C-32
3/8" Inner Core
75'
K-380, K-400, K-3800
59-55467
C-46
1/2" Inner Core
90'
K-750, K-6200, K-7500
59-37643
C-24
HD 5/8" Inner Core
100'
K-7500
59-43647
C-24
5/8" Inner Core
100'
K-750, K-6200, K-7500
59-41697
C-100
3/4" Inner Core
100'
K-750, K-7500
SALE
(Each)
$60.99
$80.99
$101.49
$35.49
$75.99
$117.99
$192.99
$355.49
$415.99
$415.99
$553.99
Part No.
Style
Fits Cable
59-62995
Bulb Auger 1-1/8"
3/8" IC, 3/8" 1W, 1121W
1-1/4" - 3"
59-63065
Drop Head
3/8" IC, 3/8" IW, 1/2" IW
1 -1/4" - 3"
59-63035
Grease Cutter 1-3/8"
3/8" IC, 318" IW, 1/2" IW
2" - 4"
59-62855
Funnel Auger 1/2" IC, 7/8"
Sectional
2" - 4"
59-62880
Spade Cutter 1/2" IC, 7/8"
Sectional
2" - 4"
59-62860
Sawtooth Cutter 2-1/2"
1/2" IC, 7/8" Sectional
3" - 4"
59-92485
P-Trap Cutter 3"
5/8" IC, 3/4" IC
4" - 10"
59-92495
Spear Cutter 1-3/4"
5/8" IC, 3/4" IC
3" - 10"
59-92525
Double Cutter 4"
5/8" IC, 3/4" IC
6" - 10"
59-62840
Straight Auger
1-1/4" Sectional
2" - 8"
59-63205
Grease Cutter 2-12"
1-1/4" Sectional
4" - 8"
59-98035
Sharktooth Cutter 3"
1-1/4" Sectional
4" - 8"
Drain Size
SALE
(Each)
$20.49
$20.49
$20.49
$30.49
$29.49
$66.99
$30.49
$26.49
$34.49
$37.49
$37.49
$46.49
7
BIGGEST SALE EVER
Model SF-2500 SuperFreeze
•The inline design allows access into tighter spaces, enabling press
connections in difficult to reach areas.
•The tool kit comes standard with two 18V Advanced Lithium 2 batteries
that can produce over 200 presses per charge for jobsite efficiency.
•Large capacity 18V Advanced Lithium 4 batteries are available and can
achieve over 400 presses per change to maximize uptime.
•The SuperFreeze Pipe Freezer is an easy-to-use
pipe-freezing unit that allows the contractor
to keep water systems operating while making
repairs. The RIDGID® Model SF-2500 is a minirefrigeration unit that circulates self-contained
refrigerant to its aluminum freeze heads. This forms an
ice plug in as little as 6 minutes in 1⁄2" (12 mm) copper
tube and can be used with up to 2 1⁄2" (65 mm) tube or 2"
(50 mm) steel pipe. Once the pipe is plugged, repairs can be
made while the ice plug is maintained by the unit. Includes
a bottle of specially formulated freeze gel to speed freezing.
Apply the gel to freeze heads before placing on pipe.
59-43428
59-68967
RP 200-B Press Tool
2,330
$
.00
ea
4,059
New
Lower
Pricing
$
ea
MegaPress® Jaws
and Rings
Rings for ProPress® V1
•1/2" - 3/4" - 1" MegaPress Kit
For Standard RIDGID Press Tools
For use with MegaPress and
MegaPressG fittings from Viega
Features: Prep tools work with
a standard drill and remove
burrs and smooths OD of pipe
for fitting installation. Press
connections can be made on
a “wet" system Flame-less
system eliminates the need for hot work permits.
Backed by the RIDGID® Full Lifetime Warranty against
material defects and workmanship.
•ProPress® rings permit access
in tighter spaces and serve as
an excellent complement to your
RIDGID® jaw sets. The swivel actuator
allows a press tool to be placed
+/-90˚ to the tube being pressed!
Features: Designed in conjunction with
the ProPress system fittings, ensuring
total system compatibility. Designed
for use with RIDGID® Standard Press
Tools (CT-400, 320-E, RP 330-B, RP 330-C,
or RP 340).
Standard Kit Includes: Press rings, actuator
and carrying case. 1/2" – 1-1/4" Ring
59-48558
59-27423
1,015
$
1,823
.00
$
ea
FIX IT NOW
.00
ea
SERVICE • TRAINING • SITE DEMO
MOBILE REPAIR • CONSULTATION
FREE INSPECTION
& CONSULTATION
RAIDER-HANSEN NOW REPAIRS MOST
RIDGID® EQUIPMENT INCLUDING:
•Hand & General Tools
•Pipe Threading Machines
•Drain Cleaning Machines
Also Available to Rent - Call Us
.00
•SeeSnake Diagnostic Equipment
•SeekTech Utility Diagnostic
Equipment
10 BC Locations
Abbotsford
T: 604.859.2658
Burnaby
T: 604.291.7442
Delta NEW!
T: 604.946.1719
Nanaimo
T: 250.751.1239
Port Kells
T: 604.888.2669
Aldergrove
T: 604.607.0491
Chilliwack
T: 604.792.2664
Langley
T: 604.530.0224
Penticton
T: 250.492.8514
Victoria
T: 250.383.0223
Proud Members of:
*All items available while quantities last, sorry no rain cheques. Not all product may be exactly as shown. While every effort is made to ensure accuracy, we cannot be held responsible for error and omissions. 2016-9-RIDGID
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement