Setting up the BRAVIATM Internet Video Link
Package Contents
Receiver (DMX-NV1)
& Cable Cover
AC Adapter with
AC Power Cord
Stand
Mounting Bracket
HDMI Cable
DMX-NV1
Warranty Card
Attachment Guide
312
611
111
(1
)
Quick Setup Guide
US
A.
in
Pr
in
te
d
©
So
ny
Co
rp
or
at
io
n2
00
7.
NE
TW
O
RK
VID
EO
D
M
X-N
V1
RE
CE
IV
ER
Q
uic
k
Se
tu
p
Gu
id
e
USB Cable
Screws, Type 1
Mounting Knobs
Screws, Type 2
z Remote control not supplied. To operate this receiver, use your TV’s remote
control equipped with the DMeX button.
NETWORK VIDEO RECEIVER Quick Setup Guide
z Ethernet cable required (not supplied).
© Sony Corporation 2007. Printed in USA.
z Using your PC, view the Operating Instruction Manual on the Internet at http://internet.sony.tv/manual
3-216-111-11(2)
Setting up the BRAVIATM Internet Video Link
Please read all instructions before beginning the installation.
Refer to the separate Attachment Guide for instructions on attaching to your TV.
The BRAVIATM Internet Video Link receiver is compatible with certain Sony televisions with the XMBTM(XrossMediaBar®) and DMeX interface. High-speed Internet access is also required.
Power off your TV before beginning the setup. The receiver can be installed either as a stand-alone or mounted to the back of your TV set.
1
Remove Cable Cover
Remove the cable cover to expose the ports
located on the bottom of the receiver.
2
Connect Cables
3
Connect the cables in the order shown below.
DC IN 9V
LAN
OUT
%
# "
$
Connect to TV
B Connect the large end of the USB cable
to the DMeX/SERVICE port on the TV.
D Connect the straight end of the HDMI cable
to any HDMI port on the TV.
B
INPUT
LAN
DC IN 9V
LAN
DC IN 9V
DC IN
SERVICE
NETWORK
Front of
Receiver
A DC IN 9V: Connect the AC adapter to this port. Do not
plug into the wall outlet at this time.
OUT
OUT
OUT
9V
LAN
%
$
"
#
Connect an Ethernet cable to your Internet source by choosing one of the following recommendations for easy “plug and play.” Your receiver will automatically attempt to
connect to the Internet.
Powerline Ethernet Adapter
Gaming
Adapter
Ex
ist
in
g
T1
POR
ER
POW
Ethernet Cable
#
DMex
%
HDMI
C LAN: Connect an Ethernet cable (not supplied) to this
port.
Connect to the Internet
Gaming Adapter as Wireless Bridge
B
B DMex: Connect the small end of the USB cable to this
port.
D HDMI OUT: Connect the L-shaped end of the HDMI cable
to this port.
4
DC IN 9V
LAN
OUT
zThe rear view and location of the ports as shown may differ from your TV set.
5
Direct to Router
Verify Connection
a. Plug in the receiver and power on the TV.
b. Once the receiver and TV are powered on,
confirm the LED lights.
Powerline
Ethernet
Adapter
El
ec
t
r ic
al
Ethernet Cable
W
ir i
Power LED
ng
Ethernet Cable
Network LED
NETWORK
ET
INTERN
R
POWE
Modem
Ethernet Cable
T1
POR
T2
POR
T3
POR
T4
POR
Wireless Router
T1
POR
T2
POR
ER
POW
R
POWE
Standard Definition video: 802.11g
High Definition video: 802.11n
T3
POR
When you see...
T4
POR
T1
POR
Router
T2
POR
T3
POR
T4
POR
R
POWE
Router
Power
LED
Receiver...
Green
Red
is powered “On.”
is not connected. Check all cable
components.
is in update mode.
is connected to the Internet.
has network activity.
Orange
Network Green
LED
Blinking
Green
Standard Definition video: HomePlug Turbo,
HomePlug AV, UPA, HD-PLC
High Definition video: HomePlug AV, UPA, HD-PLC
z If you need to configure a fixed IP address or proxy server, check the Operating Instruction Manual for more information.
6
Confirm Connection
7
Follow these instructions to confirm.
a. Press the DMeX button on your TV’s remote control
to view the connection status.
Enter Region
It is strongly recommended that you complete
Region Setup before using your receiver. 8
Attach Cable Cover
Slide the cable cover back into place.
a. Highlight the Internet Video icon at the bottom of the
Settings menu on the XMBTM (XrossMediaBar®) and press .
z If “Feature available with DMeX module” appears on the
screen, wait a few moments and try again.
b. Highlight Region and press
b. When you see the message “Configuration Successful,”
press the HOME button on your TV’s remote control. These menu icons associated with the receiver will appear
on the XMBTM (XrossMediaBar®).
.
Front of
Receiver
c. Follow the on-screen instructions to complete the setup.
z Default country is the United States. Press the B button
to select a different country.
Video Icon
DC IN 9V
LAN
OUT
LAN
DC IN 9V
OUT
B
Network Icon
z IMPORTANT: Do not press the INPUT button on the
remote control to access the BRAVIA™ Internet Video
Link. It is available on the XMBTM.
Internet
Video Icon
z For attachment options to the TV, see the separate
Attachment Guide.
Media Category Bar
Getting to Know Your Receiver
Using Your TV’s Remote Control with Your Receiver
Use your Sony TV’s remote control with the DMeX button to operate the BRAVIATM Internet Video Link receiver. This receiver does not come with its own remote control.
Button
Internet Video Guide
BRAVIA Internet Video Link is a gateway that brings Internet videos
straight to your BRAVIA TV.
Button description for receiver use
Displays the Control Panel in the Video Player
Returns to the previous screen or saves selections,
depending on the screen
Opens the TV Home Menu/
XMBTM (XrossMediaBar ®)
Look for the Internet Video
icon on the Settings menu
when connected
Make or confirm a selection
Move up, down, left or right on the screen
The videos in the Internet Video Guide are arranged in thumbnails. Each
video’s title and parental guideline rating is labeled in the lower left-hand
corner of the screen.
Launches My Page
1. Scroll between videos using the V/v/B/b buttons. To page up and
down, press CH +/–.
2. Highlight the video you want to watch.
3. Press to open the video in the Video Player.
Displays Options menu to select additional features
unique to the receiver
z In the Internet Video Guide, press OPTIONS and select Categories to
view more videos.
Enters numbers
IMPORTANT: The Parental Lock function set on the TV will block video
content based on the TV Rating. The Movie Rating will not block content
with this receiver.
Page Up/Down
1. Press HOME on your TV’s remote control to access the Video menu on
®
the XMBTM (XrossMediaBar ).
2. Press the v button to highlight the service content provider of your
choice.
3. Press to open the Internet Video Guide with videos provided by the
service content provider.
While in the Video Player
Press...
To Do This
7/W
Zoom in/out (if available)
View the control panel
Stop video playback and return to Internet Video
Guide
Pause/play a video
Remote controls may vary.
Shown with RM-YD018.
Display Options menu to zoom in and out
Video Player
= Press to Pause the video during playback. Press again to Play.
= Press the RETURN button to stop the video and return to the Internet
Video Guide.
= Press V/v to zoom in/out.
z Original quality of the picture may be lost when zooming in or out.
While in the Internet Video Guide
Press...
To Do This
View Home Category, view additional Categories,
Sort by category, Save this Link
Page up/down in Internet Video Guide
My Video Links
Follow the instructions below to save videos to My Video Links for quick
and easy viewing.
Save this Link
1. In the Internet Video Guide, highlight the video you wish to save.
2. Press the OPTIONS button and select Save this Link.
Helpful Hints and Troubleshooting
View My Video Links
1. Press the HOME button and highlight the Video menu.
2. Press the UP button to select My Video Links.
•
The receiver should be installed near an easily accessible power outlet.
•
To turn off or reset the receiver, unplug it from the wall.
•
Test the receiver’s connection before mounting it to your TV, especially if you are mounting the TV to a wall.
•
If icons related to the receiver do not appear as shown in step 6 of Setting up the BRAVIATM Internet Video Link, check your
cable connections and Internet connection.
•
Make sure that the USB and the HDMI cables are connected to the receiver and to the corresponding ports on the TV set.
•
Verify your network connection by ensuring the Internet Video icon, shown to the right, appears on the
XMBTM under the Settings menu.
•
If the screen is black, press the HOME button to access the XMBTM and select an icon associated with the
receiver. Do not try to access the receiver using the INPUT button on the remote control. The HDMI
input on the TV will not activate the receiver.
•
z The Favorites button on your TV’s remote control is specifically for TV
channel Favorites.
(connected, green)
To view more videos while in the Internet Video Guide, press the OPTIONS button and select Categories. Select Home
Category to return to the main page.
•
Some videos may not be available for viewing, depending on the TV’s Parental Lock.
•
Videos saved to My Video Links may not be available if they have been removed from the service content provider.
•
Your receiver will update software from time to time. See the Operating Instruction Manual for more details.
•
It is normal to see a black screen following an update or a reset of the receiver. To proceed, press the HOME button and
select an icon from the XMBTM.
•
Recommended connection speed: Standard Definition video 2.5 Mbps, High Definition video 10 Mbps
•
To register your BRAVIATM Internet Video Link and access enhanced features, visit https://internet.sony.tv
•
To view or download the Operating Instruction Manual, visit http://internet.sony.tv/manual
•
A hard copy of the Operating Instruction Manual is available by calling 800-488-SONY (7669) or by visiting http://www.sony.com/accessories (handling charges may apply).
•
For further assistance, contact Sony at 866-918-BIVL (2485)
My Page
You must complete Region Setup before accessing this feature.
My Page gives you instant access to news, weather, and traffic
information, all with the click of a button. To access My Page, press the
shortcut button, DMeX, on your remote control.
To control the news articles:
1. Press the B/b buttons on your TV’s remote control to change source.
2. Press the V/v buttons to change topics.
3. Press to view the full article in a new screen.
Messages
From time to time, Sony and the service content providers will send
important information to your Message Inbox.
To open your Message Inbox:
1. Press HOME on your TV’s remote control to access the Network menu
®
on the XMBTM (XrossMediaBar ).
2. Highlight the Messages icon and press .
3. Your Message Inbox will open. To read a message, highlight it using
the V/v buttons and press .
Specifications
Model Name: Network Video Receiver DMX-NV1
Dimensions (receiver alone):
4.1 x 6.4 x 1.3 inches (105.4 x 163.7 x 32.3 mm)
Power Requirement: AC 120V ~ 0.5A 60Hz External AC Adapter
Dimensions (with cable cover and stand):
4.1 x 8.8 x 4.3 inches (105.4 x 224 x 32.3 mm)
DC Input:
9V 1A 9W
Mass (receiver alone):
1.1 lbs (0.5 kg)
z The screen images shown above may differ from the actual images you see on your TV.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement