Aerator Manual - Classen Turf equipment available at UK dealers.

Aerator Manual - Classen Turf equipment available at UK dealers.
Rev. A 02-2017
Original Language Manual
MAN 4174505
TA18HE
Parts Manual 4174504
OPERATOR’S MANUAL
COMPACT AERATOR
CALIFORNIA
WARNING
Proposition 65 Warning
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects
and other reproductive harm.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, wiring
insulation, and related accessories
contain lead and lead compounds,
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
PRE-DELIVERY CHECK LIST
Check the following before you deliver the Aerator to
the customer.
1. Guards and shields fastened in place.
2. Decals fastened and legible.
3. Weight bar installed.
4. Gas lever on engine turned on.
5. All lubrication points greased.
6. 6:1 gearbox oil level.
7. Engine oil level.
8. Air cleaner.
9. Touch up scratches.
10. Chain(s) tight.
11. Lowering handle working properly.
12. Control handle(s) working to tighten V-belt(s).
13. Add fuel, start engine, test run.
DATE SET UP __________/__________/__________
DELIVERY CHECK LIST
Review the operators manual with the customer.
1. Schiller Grounds Care, Inc. warranty.
2. Safe operation and service.
3. How to use controls.
4. Operating the machine correctly.
5. Transporting the Aerator.
6. Correct fuel and lubricants.
7. Daily and periodic inspections.
8. Changing oil after break-in period.
9. Servicing the Aerator regularly and correctly.
10.Schiller Grounds Care, Inc. parts and service.
11. Give the customer the operators manual and encourage customer to read it.
DATE DELIVERED ______/______/_____
SIGNATURE ________________________________
OWNER’S RECORD
DATE PURCHASED______________________________
AERATOR MODEL NUMBER______________________
AERATOR SERIAL NUMBER ______________________
ENGINE MODEL NUMBER ________________________
ENGINE SERIAL NUMBER________________________
2
AERATOR
IMPORTANT MESSAGE
Thank you for purchasing this Classen product. You have purchased a world class product, one of the best
designed and built anywhere.
This product comes with Parts and Operator's Manuals. The useful life and good service you receive from this
product depends to a large extent on how well you read and understand this manual. Treat this product properly
and adjust it as instructed, and it will give you many years of reliable service.
See a Classen dealer for any service or parts needed. Classen service ensures that you continue to receive
the best results possible from Classen products. You can trust Classen replacement parts because they are
manufactured with the same high precision and quality as the original parts.
Classen designs and builds its equipment to serve many years in a safe and productive manner. For longest life,
use this product only as directed in the manual, keep it in good repair and follow safety warnings and instructions. You'll always be glad you did.
Classen
1028 Street Road
Southampton, PA 18966
TABLE OF CONTENTS
FIGURES
PAGE
SAFETY..........................................................................................................................................................4-7
LABELS............................................................................................................................................................. 8
CONTROLS....................................................................................................................................................... 9
OPERATION............................................................................................................................................... 10-11
MAINTENANCE / STORAGE.....................................................................................................................12-13
DECLARATION OF CONFORMITY................................................................................................................ 14
WARRANTY................................................................................................................................ BACK COVER
3
SAFETY
AERATOR
NOTICE !!!
Unauthorized modifications may present extreme
safety hazards to operators and bystanders and
could also result in product damage.
Classen strongly warns against, rejects and disclaims
any modifications, add-on accessories or product
alterations that are not designed, developed, tested
and approved by Classen Engineering Department.
Any Classen product that is altered, modified or
changed in any manner not specifically authorized
after original manufacture–including the addition of
“after-market” accessories or component parts not
specifically approved by Classen–will result in the
Classen Warranty being voided.
Any and all liability for personal injury and/or property
damage caused by any unauthorized modifications,
add-on accessories or products not approved by
Classen will be considered the responsibility of
the individual(s) or company designing and/or
making such changes. Classen will vigorously
pursue full indemnification and costs from any party
responsible for such unauthorized post-manufacture
modifications and/or accessories should personal
injury and/or property damage result.
This symbol means:
ATTENTION!
BECOME ALERT!
Your safety and the safety of others is involved.
Signal word definitions:
The signal words below are used to identify levels
of hazard seriousness. These words appear in this
manual and on the safety labels attached to Classen
machines. For your safety and the safety of others,
read and follow the information given with these
signal words and/or the symbol shown above.
DANGER indicates an imminently hazardous
situation which, if not avoided, WILL result in death
or serious injury.
WARNING indicates a potentially hazardous
situation which, if not avoided, COULD result in
death or serious injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or moderate
injury. It may also be used to alert against unsafe
practices or property damage.
1028 STREET ROAD
SOUTHHAMPTON, PA 18966 U.S.A.
2010 xxxKG xx.xKW
MODEL DESCRIPTION
MODEL NUMBER
4
SERIAL NUMBER
CAUTION used without the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, MAY result in property damage.
MODEL NUMBER: This number appears on
sales literature, technical manuals and price lists.
SERIAL NUMBER: This number appears only
on your machine. It contains the model number
followed consecutively by the serial number.
Use this number when ordering parts or seeking
warranty information.
SAFETY
AERATOR
Machine Preparation
Operator preparation and
training
Read the Operation & Safety
Manual
• If an operator or mechanic cannot read English, it
is the owner's responsibility to explain this material
to them. If any portion of this material is unclear,
contact your factory representative for clarification.
• B
ecome familiar with the safe operation of the
equipment, operator controls and safety signs. Be
prepared to stop the engine quickly in an emergency. Do not operate or allow another person to
operate this machine if there are any questions
about safety.
• A
ll operators and mechanics should be trained.
The owner is responsible for training the users.
• W
ear appropriate clothing, including safety goggles
or safety glasses with side shields when operating.
Do not operate barefoot or wearing open sandals.
Long hair, loose clothing or jewelry may get tangled
in moving parts.
• Wear hearing protection.
• Operate only in daylight or good artificial light.
• Wear safety glasses.
• N
ever allow underage children, unskilled or improperly
trained people to operate this equipment. Local regulations can restrict the age of the operator.
• K
eep warning labels and this operator's manual
legible and intact. Replacement labels and manuals are available from the factory.
• D
o not operate machine while under the influence
of drugs or alcohol.
• T
he owner/user can prevent and is responsible for
accidents or injuries occurring to themselves, other
people or property.
• Be sure you know how to stop the aerator at a moments notice.
Site preparation and circumstances
• Evaluate the terrain to determine how to safely perform the job. Only use accessories and attachments
approved by the manufacturer.
• Clear the area to be aerated of objects such as
rocks, toys, wire or other debris that may be thrown
or get tangled in the aerator.
• Identify and mark objects to be avoided such as
sprinkler heads, stakes, water valves, etc.
• B
e sure the area is clear of pets and people,
especially young children. Never assume they will
remain where you last saw them. Stop the machine
if any enter the area.
• Aerate only in daylight or in good artificial light.
Machine Preparation
• D
o not tamper with or defeat safety devices. Keep
guards, shields and interlock safety devices in place
and in proper working condition. They are for your
protection.
• K
eep all fasteners such as nuts, bolts and pins well
secured.
• V
isually inspect tines for wear or damage. Replace
worn or damaged tines and bolts.
• V
erify that machine and attachments, if any, are in
good operating condition.
• Do not engage tines until ready to aerate.
OPERATING SAFELY
In General
• U
se extra care when loading or unloading the machine into a trailer or truck. Never pick up or carry
the machine when the engine is running.
• U
se caution when making turns and crossing roads
and sidewalks. Stop tines when not aerating.
• D
o not run the engine in an enclosed area where
dangerous carbon monoxide fumes can collect.
• N
ever leave a machine unattended. Always turn off
tines and stop engine when leaving the operator
position.
• Use extreme caution when reversing or pulling machine towards you.
• Clean/remove debris from mufflers and engine to
help prevent fires.
5
SAFETY
Operating On Slopes
Use Extra Care When Working On Slopes
• D
o not operate on slopes if uneasy or uncertain. Ultimate responsibility for safe operation on slopes rests
with the operator.
• Do not operate on steep slopes.
• Keep all movement on slopes slow and gradual.
• D
o not aerate near drop-offs, ditches or embankments. The machine could suddenly turn over if a
wheel runs over the edge or an edge caves in.
• D
o not turn on slopes unless necessary, and then
turn slowly and downhill when possible.
• Be sure of your footing on slopes.
Interrupting Operation
•
•
Before leaving the operator’s position:
— Park on level ground.
— Release control handle.
— Shut off the engine.
Release control handle and lift up on the tine lowering handle:
— when not aerating;
— for transport;
— when crossing surfaces other than grass.
• Release control handle, wait until tines stop moving
and stop engine:
— before refueling;
— before making tines adjustment.
• Release control handle, wait for tines to stop, stop
the engine and disconnect spark plug wires:
­­­— before clearing blockages;
­— before checking, cleaning or working on the machine;
­— after striking a foreign object. Inspect the machine
for damage and make repairs before restarting;
— if the machine begins to vibrate abnormally: shut
off machine immediately. Inspect and make repairs as needed before restarting;
— except for repairs or adjustments as specifically
noted, such as for carburetor adjustment, where
the engine must be running. Keep hands and feet
clear of moving parts in these circumstances.
• A
llow the tines to come to a complete stop when
stopping operation to clear blockages, unclog, inspect the machine, do maintenance or repair.
• R
educe the throttle setting during engine shut-down
and, if the engine is provided with a shut-off valve,
turn the fuel off at the conclusion of operation. Refer
to Page 12
6
AERATOR
MAINTENANCE SAFETY
In general
• Maintain machine according to manufacturer’s
schedule and instructions for maximum safety
and best results.
• Park machine on level ground.
• Never allow untrained personnel to service machine.
• Guards should only be removed by qualified maintenance technician for maintenance/service. Replace
when work is complete.
• Adjust or repair only after the engine has been
stopped and the tines has stopped moving.
• Disconnect spark plug wire(s) before doing any
maintenance.
• Replace parts if worn, damaged or faulty. For best
results, always replace with parts recommended by
the manufacturer.
• Do not dismantle the machine without releasing or
restraining forces which may cause parts to move
suddenly.
• Provide adequate support, e.g. jack stands for lifted
machine or parts if working beneath.
• Do not put hands or feet near or under
rotating parts.
• Clean up spilled oil or fuel thoroughly.
• Replace faulty mufflers.
• To reduce fire hazards, keep the engine, muffler,
and fuel storage area free of grass, leaves, debris
SAFETY
AERATOR
buildup or grease.
!
WARNING
Tines
Storage Safety
• Stop the engine and allow to cool before storing.
• Drain the fuel tank outdoors only.
The aerator tines are sharp and can
cut. Use extra caution when handling.
Remove obstructions with care. Wrap
the tines or wear gloves.
• S
tore fuel in an approved container in a cool, dry
place.
• K
eep the machine and fuel containers in a locked
storage place to prevent tampering and to keep
children from playing with them.
• Only replace tines. Never straighten or weld.
• Keep other persons away from tines.
Fuel
!
• D
o not store the machine or fuel container near
heating appliances with an open flame, such as a
water heater, or an appliance with a pilot light.
WARNING
• Petrol (gasoline) and diesel
fuels are flammable; petrol
(gasoline) vapors are explosive. Use extra care when
handling.
• Store only in containers specifically designed
for fuel.
• K
eep gasoline storage area free of grass, leaves
and excessive grease to reduce fire hazard.
• C
lean grass and debris from cutting units, drives,
mufflers and engine to help prevent fires.
.
• When refueling or checking fuel level:
• Stop the engine and allow to cool;
• Do not smoke;
• Refuel outdoors only;
• Use a funnel;
• Do not overfill;
• If fuel is spilled, do not attempt to start the
engine until the spill is cleaned up and vapors
have cleared.
• Replace caps on fuel containers and tanks
securely.
Sparks from static electricity can start fires or cause
explosions. Flowing fuel can generate static electricity.
To prevent static electricity sparks:
• Keep fuel containers electrically grounded. Do not
fill containers in a vehicle or on a truck or trailer
bed with a plastic liner. Fill containers on the
ground away from the vehicle.
• When practical, remove petrol (gas) powered
equipment from the truck or trailer and refuel it on
the ground. If equipment must be refueled on the
truck or trailer, refuel from a portable container
rather than a dispenser nozzle.
• Keep the dispenser nozzle in contact with the rim
of the fuel tank or container opening until fueling is
complete. Do not use a nozzle lock-open device.
7
SAFETY LABELS
AERATOR
4173241
8
AERATOR
CONTROLS
FUEL SHUT OFF (A) - Move to the “OFF”
position to shut off the fuel whenever transporting the
machine by trailer, truck or during storage. Move to the
“ON” position before starting the engine.
SWITCH (B) -
Move to the “OFF” position to stop the engine.
Move to the “ON” position before starting engine.
CHOKE (C) -
Move to the “CHOKE” position to apply the choke.
Move to the “RUN” position to remove the choke.
THROTTLE (D) - Push throttle forward.
CONTROL HANDLE (E) -
Squeeze control handle completely to engage wheels
and tines to propel unit forward.
TINE HANDLE (F) - Push down on the tine
lowering handle to place tines in the turf. Pull up on the
tine handle to raise the tines out of the turf for transport.
9
OPERATION
AERATOR
PRE-OPERATION CHECK LIST
(Operator’s responsibility)
• R
eview and follow all safety rules and safety
decal instructions.
• C
heck that all safety decals are installed and
in good condition. Replace if damaged.
• C
heck to make sure all shields and guards are
properly installed and in good condition.
• C
heck that all hardware is properly installed
and secured.
d. If the oil level is low, fill to the edge of the oil filler
hole with the recommended oil. SAE 10W-30 is
recommended for general use. Refer to engine
oil recommendations in engine manual for other
viscosities and information.
e. Screw in the filler cap/dipstick securely.
3. If applicable, check engine crankcase and gear
reduction case oil levels with the engine resting in a
level position. Add oil if necessary. (Refer to engine
manufacturer’s manual for the correct type and
amount of oil.)
• C
heck to be sure engine is free of dirt and debris.
Pay particular attention to the cooling fins, governor
parts and muffler. Clean air intake screen. Check air
cleaner; service if necessary.
4. Open the fuel valve.
• Inspect area. Remove stones or other hard objects
that might cause damage.
Start Engine Safely
5. F
ill the fuel tank with the amount and type of fuel
recommended by the engine manufacturer.
• C
heck that there are no underground utilities and
sprinkler heads in work area.
Make sure hands and feet are out of the way of moving parts when starting engine.
• C
heck all lubrication points and grease as
instructed in manual.
Starting Engine
• P
erform a functional check of the safety interlock
system each time you operate the unit. If it doesn’t
work, repair before using the machine.
2. Turn choke on (closed).
READ SAFETY SIGNS
1. Turn fuel cock to the “open” position.
3. Turn ignition switch to “on”.
4. Pull recoil starter rope until engine starts.
5. After engine is warm, turn off choke (open).
6. Allow engine to run one minute before aerating.
!
WARNING
ALL GUARDS MUST
BE IN PLACE WHILE
MACHINE IS IN OPERATION.
!
WARNING
KEEP HANDS AND
FEET AWAY FROM
MOVING PARTS.
BEFORE STARTING THE ENGINE
Transporting Aerator
1. Raise tines before transporting unit across surfaces
or before transporting from one work area to another
by lifting up on the lowering handle.
2. Turn choke on (closed).
1. B
e familiar with the controls, how each functions, and
what each operates.
3. Turn ignition switch to “on”.
2. C
heck engine oil level. Add oil if necessary, following
the engine manufacturer’s recommendations. Refer to
engine manual supplied with machine.
5. After engine is warm, turn off choke (open).
Engine Oil Level Check
a. BEFORE CHECKING ENGINE: make certain the
engine is level and the engine switch is in the OFF
position.
b. Remove the filler cap/dipstick and wipe it clean.
c. Insert and remove the dipstick without screwing it
into the filler neck. Check the oil level shown on
the dipstick.
10
7.Check engine rpm setting before operating. DO NOT
exceed 3600 rpm.
4. Pull recoil starter rope until engine starts.
6. Allow engine to run one minute before aerating.
7.Check engine rpm setting before operating. DO NOT
exceed 3600 rpm.
OPERATION
AERATOR
!
WARNING
Operating Aerator
1. Start engine.
2. Make sure the rear wheels are in the down position
(tines not touching ground) by lifting upwards on
the lowering handle. Slowly pull back on the control
handle(s). Figure 1
Figure 1
Control Handle
Lowering Handle
3. Move aerator to the work area.
4. Release control handle and push down on lowering
handle putting tines in the turf.
5. Pull back slowly on the control handle to begin
aerating. For maximum penetration into turf, apply
downward pressure on main handle. This model
has three tine hubs that drive independently to allow
for easier turning.
6.When finished aerating, release control handle, wait
for tines to stop moving, pull up on lowering handle
to remove tines from turf and move wheels into
transport position.
Stopping Engine
1. Release control handles.
2. Reduce the throttle setting to minimum.
3. Turn off ignition switch.
11
MAINTENANCE / STORAGE
Practice Safe Maintenance
Keep all machine parts in good condition and fastened
in place. Fix damages immediately. Replace worn or
broken parts. Whenever you work on the machine, disconnect spark plug wire. When replacement parts are
required, use genuine Schiller Grounds Care, Inc. parts
or parts with equivalent characteristics, including type,
strength and material. Failure to do so may result in
product malfunction and possible injury to the operator
and/or bystanders.
WARNING
SAFETY WARNING: TO PREVENT POSSIBLE EXPLOSION OR IGNITION OF VAPORIZED FUEL,
DO NOT STORE EQUIPMENT WITH FUEL IN TANK
OR CARBURETOR OR NEAR OPEN FLAME (I.E.
FURNACE, WATER HEATER, PILOT LIGHT).
STORAGE INSTRUCTIONS
Carbon monoxide present in the exhaust is an odorless
and deadly gas. Never start or run the engine inside
where exhaust fumes can collect.
Before the Aerator is put into storage for any period
exceeding 30 days, the following steps should be
taken.
1. Drain all fuel from fuel tank and fuel lines.
Provide enough fresh air to keep fumes from getting too
strong. Replace any warning decal that becomes illegible immediately.
2. Start engine and run until all fuel is used from carburetor float bowl.
AERATOR MAINTENANCE
3. While engine is still warm, drain the crankcase oil
and replace with the proper weight oil corresponding
to the season the Aerator will next be used.
TO KEEP THE AERATOR IN GOOD
OPERATING CONDITION, PERFORM
THE FOLLOWING:
• When replacement parts are required, use genuine
Classen parts or parts with equivalent characteristics
including type, strength, and material. Failure to do
so may result in product malfunction and possible
injury to the operator and/or bystanders.
• Any warning decal that becomes illegible should be
replaced immediately.
• Do not operate equipment without shield(s) in place.
Do not make any adjustments or perform any maintenance while the engine is running.
• Thoroughly clean all tines inside and out when
aerating is completed and apply a light coat of oil to
prevent rust on tines.
• Always lubricate Aerator each time it is put into
service. Wipe off lubrication fittings before and after
each lubrication. The number of lubrication fittings
vary depending on model of Aerator.
• Keep drive belt(s) free of oil and dirt.
12
AERATOR
4. Remove the spark plug and squirt a small quantity
of engine oil into the cylinder. Turn the engine over a
few times to distribute that oil.
5. Lubricate all lubrication fittings.
To put Aerator into operation after extended storage:
1. Check for loose parts and tighten if necessary.
2. Check for cracked or broken tines and replace.
3. Fill fuel tank.
4. Check engine and gear reduction case oil levels (with
engine in a level position).
5. Start engine.
6. Check for fuel leaks.
7. Check operation of control handle to make sure unit
stops when lever is released forward.
8. Aerator is equipped with fuel shut-off valve, close
valve before transporting.
AERATOR
MAINTENANCE / STORAGE
LUBRICATION
Grease the three tine bearings at the start of the season
and every 25 hours.
ENGINE MAINTENANCE
(Refer to engine manufacturer’s owners manual) Check
engine and gear reduction case oil level with engine
resting in a level position. Inspect air filter element and
service/replace if necessary.
CLUTCH CABLE
The belt should be fully de-clutched from the engine
pulley when bail is released. If cable needs to be tightened, remove nut on bail and raise connecting bolt to
the 2nd or 3rd hole as seen in Figure 2.
Figure 2
CHAIN
The roller chain should have 1/8” - 1/4” deflection at
the center point between the rear tine shaft sprocket
and the front wheel shaft sprocket. To adjust, tighten or
loosen the 3/8” bolt under the pulley guard as seen in
Figure 3.
Figure 3
TINE DEPTH CONTROL
The depth control that the tine can penetrate the ground
can be controlled using the depth control bolts on both
sides of the unit as shown in Figure 4. Set both bolts to
the desired depth by turning nylock nut to proper location and locking in with the other nut. Depth can be set
from 1-1/4” to 3”.
Figure 4
13
EC Declaration of Conformity
P/N 4174684 Rev A
The Undersigned Manufacturer:
Schiller Grounds Care, Inc.
1028 Street Road
Southampton, PA 18966
Rob Kurzyna
Director of Operations
Date: 2nd February 2017
EU Authorized Representative
Technical File Holder:
Earlsmere Limited
Unit 18 Valley Road
Station Road Industrial Estate
Wombwell, Barnsley, South Yorkshire, S73 OBS UK
Declare that the machine described below:
Make & Type…………………………………… Classen
Category…………………………………………Aerator
Series…………………………………………….TA18HE
Engine……………………………………………Honda GX120
Speed…………………………………………….3600 rpm
Net installed power……………………………..2.6kW (3.5HP)
Jim White
Managing Director
Date: 2nd February 2017
Complies with the provisions of the following European Directives, Amendments and the Regulations transposing it into
national law.
Directives/Harmonized Standards
Machinery Directive ..................................................................…... 2006/42/EC
ISO 12100: 2010 (Supersedes ISO 12100-1-2003+A1:2009)
EMC Directive: ........................................................................ 2014/30/EU
Noise in the Environment Directive ................................................. 2000/14/EC
Vibration Directive ........................................................................ 2002/44/EC
Pedestrian controlled Aerators and Scarifiers……………………........ EN 13684
Non Road Emissions .........................................................................97/68/EC; 2012/46/EU Sound:
Sound levels were determined in accordance with Directives 2000/14/EC and EN ISO 3744:2010.
Guaranteed Sound Power Level ............. 102 dB Model TA18HE
Sound Pressure........................................ 90 dB Model TA18HE
Vibration:
Hand/arm vibration was measured at the right and left operator handles as per ISO 5349-1-2001 and ISO 53492-2001. Only the highest of the left and right readings is given. Levels were calculated using ISO/DIS 5395-1, in
accordance with 2002/44/EC.
Guaranteed Vibration Level................. 3.6 m/s² Intended Use and Limits:
This machine is intended for aerating of turf areas.
Model TA18HE
2 YEAR LIMITED SERVICE AND
WARRANTY POLICY
Schiller Grounds Care, Inc.
1028 Street Road • Southampton, PA 18966
Telephone: 1-800-366-6268
TWO YEAR LIMITED WARRANTY
Effective April 1, 2007
For the period of two years from the date of purchase, CLASSEN will repair or replace for the original purchaser
free of charge, any part or parts found upon the examination of our factory authorized service station, or by
the factory in Southampton, PA to be defective in material or workmanship. All transportation charges on parts
submitted for repair or replacement under this warranty shall be borne by the purchaser.
This warranty does not include engines or engine parts, tires, batteries, or gearboxes that are covered under
separate warranties furnished by their manufacturer or supplier, nor does it include normal maintenance parts,
including but not limited to, spark plugs, points, filters, blades/tines, and lubricants.
All service under this warranty will be furnished or performed by our factory authorized service stations.
There is no other expressed warranty. Implied warranties, including those of merchantability and fitness for a
particular purpose, are limited to two years from the date of purchase and to the extent permitted by law, any
and all implied warranties are excluded. The above remedy of repair and replacement of defective parts is
the purchaser’s exclusive remedy for any defect, malfunction or breach of warranty. Liability for incidental or
consequential damages under any and all warranties is excluded to the extent permitted by law.
NORMAL RESPONSIBILITIES OF THE SELLER AND THE USER
1.The Distributor or Dealer is responsible for the proper assembly and preparation of the product for
delivery to the end user.
2. The User is responsible for reading the Manual and Instructions.
3. The User is responsible for proper operation and maintenance as described in the manual.
4. The User is responsible for the replacement of wear items such as blades/tines, belts, tires, batteries, etc.
5. The User is responsible for damage due to improper operation and maintenance, as well as abuse.
All claims must be received by the factory 30 days after the end of the warranty period to receive warranty consideration.
CLASSEN®
SCHILLER GROUNDS CARE, INC.
1028 STREET ROAD, P.O. BOX 38
SOUTHAMPTON, PA 18966
PHONE 877-596-6337 • FAX 215-357-8045
©2014 Schiller Grounds Care, Inc. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement