ELUX16x2 - Everfocus
ELUX16x2
16CH, H.264, 1080p FHD Hybrid DVR
Quick Installation Guide
Copyright © EverFocus Electronics Corp.
Release Date: July, 2016
All the images including product pictures or screen shots in this document are for example only.
The images may vary depending on the product and software version. Information contained in
this document is subject to change without notice.
ELUX16x2 FHD Hybrid DVR
1. Overview
1.1 Front Panel
1
9
2
10 11
3
12 13 14
4
5
6
7
8
16
15
No. Name
Description
1
The USB2.0 port for connecting to a mouse, external storage device or
EKB200 keyboard.
USB2.0 Port
: In Playback mode, press to play in fast reverse.
: In Playback mode, press to pause / play in reverse.
2
Control Buttons
: In Playback mode, press to exit playback mode.
: Press to enter Playback mode. In Playback mode, press to
pause / resume playback.
: In Playback mode, press to play in fast forward.
3
DVD Burner
(optional)
Use the DVD Burner for archiving the recordings from the DVR. It’s
highly recommended to use a DVD+R with 4x or higher speed disc for
recording. To open the DVD tray, please refer to 4.7 Archiving the
Recordings or Log Data to the USB or DVD in the User’s Manual. To
close the tray, just gently push it and it will be automatically closed.
4
5
Arrow Buttons
Enter
Use these arrow buttons to change the Menu settings.
Press to enter.
6
Menu / ESC
In Live mode, press to enter the Main OSD Setup Menu. In Setup
mode, press to exit or return to the previous setup menu.
7
Search
8
LED Indicator
9
IR Receiver
Press to enter the Search Setup menu.
Power: Indicates the power is on.
HDD: Indicates the internal Hard Disk is activating.
Alarm: Indicates an alarm input is triggered.
Network: Indicates the network is connected.
Record: Indicates the DVR is recording.
Receive signals from IR remote control.
1
ELUX16x2 FHD Hybrid DVR
10
View
11
SEQ
12
Display
13
Monitor
14
Zoom
15
16
Channel
Buttons
Copy
In Live mode, press to switch to the layout type for displaying the
channel feeds.
Press to enter the automatic sequence mode. This will show each
channel feed in sequence. Press again to exit sequence mode.
Press to cycle between the info display types (channel and status bar
info).
In Live mode, press to switch between Main and Call Monitor.
In Live mode, press to zoom the display of a channel. Press the
Menu/ESC button to exit Zoom mode.
Select the full screen channel in live mode.
Select the full screen channel in playback.
Press to enter the Copy Menu.
1.2 Rear Panel
2
1
3
4
5
6
7
1
CVBS
RS485
+ -
8
No. Name
9
10 11
12
1
13 14
Description
Connects to the audio input devices such as microphones. Note that
the microphone with a (built-in) amplifier and external power supply
is required.
1
Audio Input 1~16
(RCA)
2
Loop Video
Output 1~16
You can also optionally connect the monitors to each Loop Video
Output to display the video of the corresponding channel. Please
refer to 3.1 Monitor Connection.
3
eSATA Port
Connects to an external eSATA storage device, please set up an RAID
array of the eSATA device before using.
4
CVBS Port (BNC)
This can be used as a Call monitor output. Connects to the monitor
using a BNC cable (see 2.3.1 Monitor Connection).
Alarm Input /Out
Connects up to 16 alarm inputs and 1 alarm output devices. You can
also connect to the radio-controlled clock for time synchronization.
Please refer to 2.3.2 Alarm I/O.
5
2
ELUX16x2 FHD Hybrid DVR
6
7
Ethernet (LAN)
Power Switch
Connects to the Network.
Press to turn on or off the power.
8
Video Input 1~16
Connects to analog HD / SD cameras using coaxial cables.
Note:
1. The DVR can automatically configure itself as NTSC or PAL. To
do this, connect a camera to any channel of the DVR. The DVR
will detect the first connected camera format (NTSC or PAL)
and then automatically configure itself to the detected format
from the first connected camera. For example, if the format of
the first connected camera is NTSC, the DVR will configure
itself to NTSC format.
2. All video inputs are compatible with all resolution types of
cameras, such as 1080p, 720p, 960H and D1 cameras (HD-CVI /
HD-SDI cameras are not supported).
9
VGA Port
This can be used as a Call monitor output. Connects to the monitor
using a VGA cable (see 2.3.1 Monitor Connection).
10
Audio Output
(RCA)
Connects to the audio output devices, such as speakers. Note that
the speaker with a (built-in) amplifier and external power supply are
required.
11
HDMI Port
This can be used as a Main monitor output. Connects to the monitor
using a HDMI cable (see 2.3.1 Monitor Connection).
12
USB2.0 Port
The USB2.0 port for connecting to a mouse, external storage device
or EKB200 keyboard.
13
RS-485 Port
Connects to the RS-485 device (EKB500) or PTZ camera.
14
Power Port
Connects to the 12VDC 8A power using the supplied Power Adaptor.
3
ELUX16x2 FHD Hybrid DVR
1.3 eZ. Controller Function Description

eZ.Controller: Easily control PTZ camera from DVR using only coaxial cable.
eZ.Controller allows users to control PTZ camera from DVR using only a coaxial cable without
the need of a RS-485 cable between the PTZ camera and the DVR. Users can easily operate
Zoom, Focus, Iris, Direction, Auto Pan, Preset, Tour and Pattern functions to the PTZ camera
through DVR.
CVBS
RS485
+ -
PTZ Cameras
Tip: You can also bring
up the camera OSD
through Preset 95.
Note:
1. The eZ.Controller function for PTZ control is only supported for EverFocus AHD (1080p,
720p) PTZ cameras.
2. After connecting the PTZ camera to the DVR through the coaxial cable, you will have to go
to the OSD Menu to turn the PTZ ID function off (System < Camera < Basic).
4
ELUX16x2 FHD Hybrid DVR

eZ.Controller: Easily control eZ.HD camera’s OSD at the DVR end.
Traditionally, the CCTV installer needs to take a portable monitor to connect to the
camera for controlling the camera OSD at the camera installation site as the Diagram A
below. It will take extra effort, time and people to adjust the camera.
Now, EverFocus’ eZ.Controller allows users to control the camera OSD simply on the
monitor at the DVR end as illustrated in Diagram B.
A
B
Traditional Way to Control Camera OSD
Camera OSD Control Directly at DVR End
Control Camera OSD at Camera End
DVR End
Use eZ.Controller to Control Camera OSD
Camera End
DVR End
Camera End
How to Control eZ.HD Camera’s OSD at the DVR End?
1. On the DVR’s OSD setting menu, go
to System > Camera > Adjust. Select
a camera you want to adjust.
2. Click the Advanced button, and the
camera live view with the Coaxial
Panel will be displayed.
3.
4.
5.
5
To display the OSD menu, click the
Enter button
on the Coaxial Panel.
You can use the direction buttons on
the Coaxial Panel to control the
camera’s OSD setting menu.
To exit the camera OSD setting, click
Exit to return to the Adjust setting
page.
ELUX16x2 FHD Hybrid DVR
1.4 Packing List
• DVR x 1
• 12VDC 8A Power Adaptor x 1
• QIG x 1
• Mouse x 1
• HDD Bracket x 4
• SATA Cable x 4
• IR Remote Control x 1
• AAA Battery x 2 (Please see Note 4.)
• Sliver Screw x 24, Washer Head Screw x 12,
M3 (φ6.8) Screw x 4
• Rack Ear x 2
• CD x 1 (Please see Note 3.)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. The CD contains the IP Utility software, EFPlayer, User Manual and Quick Installation Guide.
4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.
6
ELUX16x2 FHD Hybrid DVR
1.5 Optional Accessories
•
EKB200 (USB controller keyboard: connect to the PC or DVR to control the PTZ cameras
connected to the DVR). Please refer to 6.9.6 EKB200 Setting in the User Manual of the
EKB200 Keyboard.
•
EKB500 (RS-485 keyboard: connect to the RS-485 port to control the PTZ cameras
connected to the DVR). Please refer to User Manual of the EKB500 Keyboard.
1.6 Dimensions
Front View
Side View
7
ELUX16x2 FHD Hybrid DVR
2. Basic Installation
2.1 Hard Disk Installation
You can optionally install four 3.5” HDDs inside the DVR for recording videos.
1.
Make sure the DVR is power-off.
2.
Unscrew the ten housing screws of the DVR and remove the housing cover.
3.
Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
Silver Screw
HDD Bracket
4.
Use the SATA Cable, and connect one end to either one of the four SATA ports on the
PCB inside the DVR, and the other end to the SATA port on the HDD.
8
ELUX16x2 FHD Hybrid DVR
5.
Connect the internal power cable to the HDD.
Note: The internal power cable is connected to the Main board inside the DVR. The
power cable features two/three connectors, which can be used to connect to
two/three HDDs.
6.
Screw the HDDs with the brackets inside the DVR using the Washer Head Screws.
7.
Screw back the housing cover to the DVR.
9
ELUX16x2 FHD Hybrid DVR
2.2 Hard Disk Compatibility List
Please go to the ELUX16x2 Web page on EverFocus’ website http://www.everfocus.com.tw to
see the latest Hard Disk Compatibility List.
Note: If using two or more hard disks, please choose the hard disks with the same capacity.
2.3 Rack Mount Installation
To install rack ears on the DVR:
1. Unscrew the four M3 (φ6.8) screws on both side of the DVR.
2. Use the supplied two rack ears and the above screws for rack mount installation on both
side.
10
ELUX16x2 FHD Hybrid DVR
3. Basic Connection
The instructions below the figure describe the basic connection for the ELUX16x2.
1
Line Level
Audio In 1~16
2
Power Supply
CVBS
RS485
+ -
3
4
5
6
7
Mouse
Network
Camera 1~16
Line Level Main Monitor
Audio Out
(HDMI)
Web Remote
Client
CMS:
Genie XMS
1. Connect the line level audio input devices to the DVR. Note that the audio input devices,
such as microphones, are required to have a (built-in) amplifier and external power supply.
2. Using the supplied Power Adaptor, connect one end to the DC 12V port on the DVR and
the other end to the power outlet.
Note: Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
3. Connect the cameras to the DVR using the coaxial cables. EverFocus eZ.HD cameras are
recommended. (HD-CVI / HD-SDI cameras are not supported)
4. To listen to audio of video source, connect speakers to the Audio Out port. Note that
speaker with a (built-in) amplifier and external power are required.
5. To view videos, connect a monitor to the HDMI port using the HDMI cable supplied by the
monitor manufacturer.
6. Use a standard RJ-45 cable to connect the DVR to the network for remote viewing or using
EverFocus surveillance system (Genie XMS).
7. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control buttons on the front panel.
11
ELUX16x2 FHD Hybrid DVR
3.1 Monitor Connection
Connect the monitor to the CVBS, HDMI or VGA port on the rear panel of the DVR. The
ELUX16x2 DVR provides 1 main monitor output (HDMI); and 2 call monitor outputs (VGA and
BNC) with identical functionality.
The main monitor output can deliver full HD output resolution (1920x1080, progressive, 60 Hz.
vert., 68 KHz hor.). The 2 call monitors can display camera streams or perform sequence display
mode. Both of the 2 call monitor outputs provide the identical functionality and can be
operated simultaneously. Make sure that the connected monitor's specifications comply with
the resolution requirements. To configure the monitor setting, please refer to 6.6 Display
Setting.
You can also optionally connect the monitors to each Loop Video Output to display the video of
the corresponding channel.
Rear View
CVBS
RS485
+ -
VGA
Cable
BNC
Cable
Call Monitor
(VGA)
Loop Video Output
1~16 (BNC)
CVBS
Cable
HDMI
Cable
Call Monitor
Main Monitor
(CVBS)
(HDMI)
Note:
1. The connected monitors’ specifications must comply with the resolution requirements.
2. Do not exceed the max. HDMI cable length of 15 meters. The standard HDMI cables can
support cable length up to 3 meters. For longer distances, such as 15 meters, it is highly
recommended to use high quality HDMI cables.
12
ELUX16x2 FHD Hybrid DVR
3.2 Alarm I / O
The DVR provides 16 alarm inputs and 1 alarm output. You can also connect the
radio-controlled clock to the alarm input of the DVR for the time synchronization. The DVR
supports the radio-controlled clock which will automatically synchronize to the time standard
so that you won’t need to reset the time manually. For radio-controlled clock connection,
connect the positive (+) wire to either port of Alarm Input 1~16 and negative (-) wire to the
GND port.
Alarm In 1~16
Alarm Out 1
Alarm
Radio-controlled Clock
Alarm Input Contacts
This DVR provides one alarm input per camera. All inputs are programmable N.O. (Normal Open)
or N.C. (Normal Closed). All settings are programmed in the ALARM / Event menu.
ALMIN
ALMIN
GND
GND
Alarm Input with N.O. contact in idle state
Alarm Input with N.C. contact in idle state
Alarm Output Contacts
The relay output provides either Normally Open or Normally Closed dry contacts.
ALMOUT +
ALMOUT +
ALMOUT -
ALMOUT -
Alarm Output with N.O. contact
Alarm Output with N.C. contact
13
ELUX16x2 FHD Hybrid DVR
3.3 RS-485 Port
The RS-485 port, located on the rear panel of the DVR, can be used to connect to an RS-485
keyboard for controlling PTZ cameras or simply connect to a PTZ camera or connect to a POS
device.
Rear View
CVBS
Coaxial Cable
RS-485 Port
RS-485 Cable
Analog PTZ Camera
EKB500 Keyboard
Note: EverFocus FHD series DVR supports the eZ.Controller function, which enables users to
control PTZ camera from DVR using only a coaxial cable without the need of a RS-485 cable
between the PTZ camera and the DVR (see 1.3 eZ.Controller Function Description).
4. Turning On / Off the Power
Before powering on the DVR, please make sure the internal HDDs have been installed properly.
Once you have completed the basic cable connections, you are ready to turn on the DVR.
To turn on the power, connect the supplied Power Cord to the power outlet and turn on the
Power Switch. All of the LED indicators on the front panel will light up. The DVR will
automatically run an internal process, when the process is complete, the LED indicators will
turn off, and the POWER LED will remain light up in green. And then you can start operating the
DVR.
To turn off the power, please go to OSD Root Menu > System Setting > Miscellaneous setting
page, and click Shutdown (refer to 6.9.7 Miscellaneous in the User’s Manual). After the
message pops up as below, you can now turn the Power Switch to the "Off" position.
14
ELUX16x2 FHD Hybrid DVR
5. Checking the Dynamic IP Address
You can look up the IP address and access the Web interface of the DVR using the IP Utility (IPU)
program, which can be downloaded from EverFocus’ Website:
http://www.everfocus.com/HQ/Support/DownloadCenter_p1.aspx. Please connect the DVR in
the same LAN of your computer.
1.
Save IP Utility Setup.exe
in your computer. Double click the .exe file and follow the
on‐screen instructions to install the IP Utility.
2.
Click the Finish button, the IP Utility will be automatically launched to search the IP devices
connected on the same LAN.
3.
To optionally configure the Machine Name, IP Address, IP Type or Port Number using the
IPU:
a. Log in the DVR by checking the desired model and then click the Log in
Log in dialog box appears.
15
icon. The
ELUX16x2 FHD Hybrid DVR
b. Type the Username and Password. Click the OK button, the status of the selected
camera will display Login.
Note:
1. The default user ID is admin and the default password is 11111111.
2. If you select more than one DVRs that have the same user ID / password, you will
be able to log in several DVRs at once.
c. Right click the columns (such as Machine Name, IP Address, IP Type or Port) to
configure the setting. Click Apply Changes
button to apply and save the settings.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your
network settings, please consult your network administrators for configuration
details.
4.
To access the Live View window, double click the IP address of the desired device, the login
window pops up. Type the user ID and password to log in. By default, the user ID is admin
and the password is 11111111.
16
ELUX16x2 FHD Hybrid DVR
5.
If you log in for the first time, follow the instruction steps on the interface to update the
latest Plugin version (ePlayer). After reloading the webpage, the login window pops up
again. Type the user ID and password to log in again. By default, the user ID is admin and
the password is 11111111.
Note for the first time login:
The “Download ePlayer Instruction” page will only be prompted for the first time login in
order to update the system to the latest plugin version.
When the Plug-in blocked appears on the browser, select Always allow plug-ins on xxx,
click Done and then reload the webpage.
6. Now you will be able to see the remote live page.
17
ELUX16x2 FHD Hybrid DVR
If you encounter the following problem or still can’t access the remote Web interface,
please see below:

If the Error window appears, please be sure to close ALL the Web browser windows first
and then click Retry. When the Completing the ePlayer Setup Wizard window shows up,
click Finish. Then, you can open a new browser again to access the DVR’s remote Web
interface.
18
ELUX16x2 FHD Hybrid DVR

If your PC or laptop is running with Windows, it’s required to run the browser as
administrator when first entering the remote web page of the device. Go to C:\Program
Files (x86)\Internet Explorer, right-click the browser and then click Run as administrator.

You may need to turn User Account Control off if you still can’t see the Remote Live View.
On the computer, click Start > Control Panel > System and Security > Action Center (click
Change User Account Control Settings), the User Account Control Settings window
appears. Adjust the slide bar to Never Notify and then click OK. Restart your computer if
requested.
19
ELUX16x2 FHD Hybrid DVR
6. Specifications
Model Name
System
Operating System
Number of Channels
RAM
Watchdog
Dual Stream
OSD Menu
System Control
Pentaplex Operation
PTZ Protocol Supported
Video
Compression Format
Video Format
Video Inputs
Video Looping Outputs
Main
Video outputs
Call
Recording
Recording Rate
/ Resolution
Search Modes
Audio
Audio Input
Audio Output
Embedded Linux
16CH
2GB
Yes
Yes
Yes
Front Panel Buttons, Mouse, IR Remote Control
Simultaneous Live, Recording, Playback, Archive and Remote
Viewing
EverFocus, Pelco D, Pelco P, Samsung, Transparent
H.264
NTSC / PAL
16 x BNC
16 x BNC
HDMI
VGA and BNC
NTSC
240fps @ 1080p;
480fps @ other resolution
PAL
200fps @ 1080p;
400fps @ other resolution
Recording Modes
Playback
Playback Rate /
Resolution
ELUX16x2
Manual, Schedule and Event
NTSC
240fps @1080p;
480fps @ other resolution
PAL
200fps @1080p
400fps @ other resolution
Date / Time, Event, Motion in Recorded Video, Snapshot by
Interval
16 inputs
1 output
20
ELUX16x2 FHD Hybrid DVR
Alarm
Alarm Inputs
Alarm Outputs
Storage Device
Internal 3.5" HDD
External HDD
Storage Capacity
DVD Burner
Network
Ethernet
Protocol
Interface
USB 2.0
RS-485
Ethernet
General
Power Input
Power Consumption
Operating Temperature
Dimensions (W x D x H)
Weight (without HDDs)
Language
Regulatory
Functions
Video Pause
Video Loss Detection
Motion Detection
Event Log
User Interface
Control PTZ via OSD
Schedule Setting
User Access
16 inputs
1 x relays
4 x SATA HDD (Optional)
1 x eSATA
16 TB
Yes (Optional)
10/100/1000 Ethernet
TCP-IP / DHCP / PPPoE / DDNS / SMTP / NTP
2 x USB 2.0 port (1 on Front Panel, 1 on Back Panel)
2 pin terminal connector
1 x RJ-45
12VDC / 8A
96W max.
0°C ~ 40°C / 32°F ~ 104°F (20 ~ 80% humidity)
395 x 430 x 79.5mm / 15.6" x 16.9" x 3.2"
6kg / 13.23lb
English, Japanese, Traditional Chinese, Spanish, Deutsch, French,
Russian, Portuguese (Brazil), Dutch, Simplified Chinese
CE, FCC, UL, BSMI
Yes
Yes
Yes
Yes
GUI (Graphical User Interface)
Yes (via both local and remote interfaces)
Supports Express and Advanced Schedule Setting
3 Levels of User Access Defined
21
ELUX16x2 FHD Hybrid DVR
Remote Client System Minimum Requirement
Operating System
Windows XP (32-bit) / Win7 (32 and 64-bit)
CPU
Intel Core I3-2100
RAM
2GB
VGA
Intel HD 2000
LAN Speed
10 / 100 / 1000 Mbps (RJ45)
Web Browser
IE9 and later, Firefox, Chrome (Windows version 44 and earlier)
Other Remote
Application
1. EverFocus’ CMS: Genie XMS
2. EverFocus’ mobile app: MobileFocus (iOS / Android);
MobileFocusHD (iPad).
22
ELUX16x2 FHD Hybrid DVR
EverFocus Electronics Corp.
EverFocus Taiwan:
12F-1, No.79, Sec. 1, Shin-Tai Wu Road,
Hsi-Chih, New Taipei City, Taiwan
TEL: +886 2 2698 2334
FAX: +886 2 2698 3943
www.everfocus.com.tw
[email protected]
EverFocus Europe - Germany:
Albert-Einstein-Strasse 1, D-46446
Emmerich, Germany
TEL: +49 2822 93940
FAX: +49 2822 939495
www.everfocus.de
[email protected]
EverFocus China - Beijing:
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing 100085, China
TEL: +86 10 6297 3336~39
FAX: +86 10 6297 1423
www.everfocus.com.cn
[email protected]
EverFocus China - Shenzhen:
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101, China
TEL: +86 755 2765 1313
FAX: +86 755 2765 0337
www.everfocus.com.cn
[email protected]
EverFocus USA - California:
1801 Highland Avenue, Unit A, Duarte, CA 91010, USA
TEL: +1 626 844 8888
FAX: +1 626 844 8838
www.everfocus.com
[email protected]
EverFocus Japan:
3F, Kuramochi, Building II, 2-2-3
Koto-Bashi,Sumida-Ku, Tokyo, 130-0022, Japan
TEL: +81 3 5625 8188
FAX: +81 3 5625 8189
www.everfocus.co.jp
[email protected]
Your EverFocus product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Please, dispose of this equipment at your
local community waste
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
Ihr EverFocus Produkt wurde entwickelt
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische
und elektronische Geräte am Ende ihrer
Nutzungsdauer vom Hausmüll getrennt
entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer
örtlichen kommunalen Sammelstelle oder
im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!
PN: 4605ELA1602001B
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement