Overhead monitor Alpine PKG-850P
PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
R
EN
PKG-850P
Rear Seat Entertainment Package
Système de divertissement pour les sièges arrière
Paquete de entretenimiento para asientos traseros
Entertainment-Paket für den Rücksitz
Sistema di intrattenimento per sedili posteriori
Underhållningspaket för baksäte
a
.u
m
o
c
.
0
3
1
•
OWNER'S MANUAL
Please read before using this equipment.
•
BEDIENUNGSANLEITUNG
Bitte vor Gebrauch des Gerätes lesen.
•
MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
•
MANUALE DI ISTRUZIONI
Si prega di leggere il manuale prima di
usare il sistema.
•
MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
•
HANDBOK
Läs denna handbok innan du använder
utrustningen.
FR
ES
DE
IT
ALPINE ELECTRONICS MARKETING, INC.
ALPINE ELECTRONICS OF AUSTRALIA PTY, LTD.
ALPINE ELECTRONICS FRANCE S.A.R.L.
1-1-8 Nishi Gotanda
Shinagawa-ku
Tokyo 141-0031, Japan
Phone 03-5496-8231
161-165 Princess Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. paris Nord II,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ELECTRONICS GmbH
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place
Torrance, California 90501 U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
Frankfurter Ring 117,
80807 München, Germany
Phone 089-32 42 640
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS OF U.K., LTD.
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road
Toronto, Ontario M3J 2M9 Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE House
Fletchamstead Highway, Coventry CCV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Tel.: 02-725 1315
PKG-850P_EN.indd 1
SV
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, España
Phone 945-283588
Designed by ALPINE ELECTRONICS EUROPE GMBH
Printed In Taiwan
Autogood products internet store http://130.com.ua
07.12.2006 11:57:38 Uhr
PKG-850P
Rear Seat Entertainment Package
•
•
•
•
•
TMX-R850 (MOBILE CINEMA MONITOR)
SHS-N100 (SINGLE SOURCE IR HEADPHONE)
RUE-4152 (UNIVERSAL REMOTE CONTROL)
INSTALLATION BRACKET
TRIM RING
PKG-850P
Système de divertissement pour les sièges arrière
•
•
•
•
•
TMX-R850 (MONITEUR CINÉMA MOBILE)
SHS-N100 (CASQUE IR À UNE SOURCE UNIQUE)
RUE-4152 (TÉLÉCOMMANDE UNIVERSELLE)
SUPPORT DE FIXATION
BAGUE DE GARNITURE
PKG-850P
Paquete de entretenimiento para asientos traseros
•
•
•
•
•
TMX-R850 (MONITOR DE CINE MÓVIL)
SHS-N100 (AURICULARES SENCILLOS POR INFRARROJOS)
RUE-4152 (MANDO A DISTANCIA UNIVERSAL)
SOPORTE DE INSTALACIÓN
ANILLO DE COLOCACIÓN
a
.u
m
o
c
.
0
PKG-850P
Entertainment-Paket für den Rücksitz
•
•
•
•
•
3
1
TMX-R850 (MOBILER CINEMA-MONITOR)
SHS-N100 (SINGLE-SOURCE-IR-KOPFHÖRER)
RUE-4152 (UNIVERSALFERNBEDIENUNG)
MONTAGEWINKEL
ANPASSUNGSRING
PKG-850P
Sistema di intrattenimento per sedili posteriori
•
•
•
•
•
TMX-R850 (MONITOR MOBILE PANORAMICO)
SHS-N100 (CUFFIE IR A SORGENTE SINGOLA)
RUE-4152 (TELECOMANDO UNIVERSALE)
SUPPORTO DI INSTALLAZIONE
ANELLO ADATTATORE
PKG-850P
Underhållningspaket för baksäte
•
•
•
•
•
PKG-850P_EN.indd 2
TMX-R850 (MOBIL BIOMONITOR)
SHS-N100 (IR-HÖRLURAR, ENKEL KÄLLA)
RUE-4152 (UNIVERSELL FJÄRRKONTROLL)
INSTALLATIONSFÄSTE
TRIMRING
Autogood products internet store http://130.com.ua
07.12.2006 11:57:38 Uhr
ENGLISH
Contents
Operating Instructions
WARNING
ntents
WARNINGS ..................................... 2
CAUTION ......................................... 3
PRECAUTIONS ................................ 3
DVB-T/TV Tuner Control
Selecting Preset Channel..................................11
Wireless Headphone
Headphone Receivers.......................................11
Operation..........................................................11
Battery Installation ...........................................11
Monitor Features
Features ............................................................. 4
Overhead Monitor ............................................. 4
Remote Control ................................................. 4
Overhead Monitor Control
Screen Display ON/OFF ................................... 5
Audio Mute Function ........................................ 5
Adjusting the Volume........................................ 5
Information
,Q&DVHRI'LI¿FXOW\........................................ 12
Remote Control Battery Replacement............. 12
Accessories ..................................................... 13
a
.u
6SHFL¿FDWLRQV ................................................. 13
m
o
c
.
0
Switching the Source......................................... 5
Setting the Backlight Brightness ....................... 5
Adjusting Picture............................................... 6
Adjusting Brightness ................................ 6
Adjusting Color Density........................... 6
Adjusting Tint........................................... 6
Adjusting Contrast.................................... 6
Adjusting Sharpness ................................. 7
Resetting the Picture Adjustment ............. 7
3
1
Switching Display Mode................................... 7
Visual EQ Operation ......................................... 8
System Setup Operation .................................... 9
Installation and Connections
WARNING
ntents
WARNINGS ................................... 14
CAUTION ....................................... 14
PRECAUTIONS .............................. 14
Installation and Connections ........................... 14
Power Connections.......................................... 15
Dome Light Connection .................................. 16
System Connections ........................................ 17
DVD Player Control
Playing and Pausing ........................................ 10
Stopping .......................................................... 10
Skipping Forward............................................ 10
Skipping Backward ......................................... 10
Selecting Menu................................................ 10
DVD Setup Operation ..................................... 10
1-EN
PKG-850P_EN.indd 1
Autogood products internet store http://130.com.ua
07.12.2006 11:57:38 Uhr
Operating Instructions
INSTALL THE PRODUCT CORRECTLY SO THAT THE
DRIVER CANNOT WATCH TV/VIDEO UNLESS THE
VEHICLE IS STOPPED AND THE EMERGENCY BRAKE
IS APPLIED.
WARNINGS
WARNING
This symbol means important
instructions.
Failure to heed them can result in serious
injury or death.
It is dangerous (and illegal in many states) for the
driver to watch the TV/Video while driving the vehicle.
The driver may be distracted from looking ahead and
an accident could occur. If the product is not installed
correctly, the driver will be able to watch the TV/Video
while driving the vehicle and may be distracted from
looking ahead causing an accident. The driver or other
people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking
ahead of the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
a
.u
m
o
c
.
0
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
3
1
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking
ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
'RLQJVRPD\UHVXOWLQDQDFFLGHQW¿UHRUHOHFWULFVKRFN
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in
¿UHHOHFWULFVKRFNRURWKHULQMXU\
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the
product.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
)DLOXUHWRGRVRPD\UHVXOWLQ¿UHRUHOHFWULFVKRFN
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result
LQ¿UH
2-EN
PKG-850P_EN.indd 2
Autogood products internet store http://130.com.ua
07.12.2006 11:57:39 Uhr
PRECAUTIONS
CAUTION
This symbol means important
instructions.
Failure to heed them can result in injury
or material property damage.
Temperature
Be sure the temperature inside the vehicle is between
+60°C (+140°F) and -10°C (+14°F) before turning your unit on.
Fuse Replacement
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized ALPINE dealer or the
nearest ALPINE Service Center for repairing.
When replacing the fuse(s), the replacement must be of the same
amperage as shown on the fuse holder. If the fuse(s) blows more
than once, carefully check all electrical connections for shorted
circuitry. Also have your vehicle’s voltage regulator checked.
KEEP FINGERS OR ANY OBJECT AWAY WHEN CLOSING THE
MONITOR.
Maintenance
Failure to do so may result in personal injury or damage to the
product.
If you have problems, do not attempt to repair the unit yourself.
Return it to your ALPINE dealer or the nearest ALPINE Service
Station for servicing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT
WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+
and –) as instructed.
5XSWXUHRUFKHPLFDOOHDNDJHIURPWKHEDWWHU\PD\FDXVH¿UHRU
personal injury.
Installation Location
Make sure the TMX-R850 will not be exposed to:
• Direct sun and heat
• Excessive dust
• High humidity
• Excessive vibrations
a
.u
Characteristics of LCD Panel
• After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to LCD
technology and is normal.
• Under cold temperature conditions, the screen may lose
contrast temporarily. After a short warm-up period, it will
return to normal.
• The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel ratio
is over 99.99%. This means that 0.01% of the pixels could be
either always ON or OFF.
m
o
c
.
0
3
1
Using Wireless Headphones
If ACC or the monitor's power source is turned off, a loud noise is
produced through the headphones. Be sure to remove the wireless
headphones from your ears before you turn the monitor off.
3-EN
PKG-850P_EN.indd 3
Autogood products internet store http://130.com.ua
07.12.2006 11:57:39 Uhr
LCD Monitor Panel
Monitor Features
This is a 8.5 inch, Active Matrix LCD. In addition, an
Infrared Wireless Headphone Transmitter is located on top
of the LCD panel.
Features
The ALPINE TMX-R850 provides the following
•
•
•
•
•
•
•
•
•
•
•
8.5 inch TFT Active Matrix Color LCD (480 x 234)
2 AUX In / 1 AUX Out
1 Remote In / 2 Remote Out
Front Panel Controls (OHM / DVD / DVD-HU /
DVB-T/TV Tuner)
Visual EQ (FLAT, NIGHT MOVIE, SOFT, SHARP,
CONTRAST)
Independent parameter setting on each AUX input
(Picture/Visual EQ/Audio Input Level/Display
Mode)
3 Level Dimmer (HIGH/MID/LOW)
CH Selectable IR Transmitter for IR Headphones
(A/B/OFF)
DVD Power Control
Customized OSD Source Name
White LED Dome Light
• The power state of the monitor is memorized when
Ignition/ACC is turned off. When Ignition/ACC is
turned back on, the monitor returns to the power state
memorized (either ON or OFF).
Monitor Open Button
Press Monitor Open Button to release the Monitor Panel.
The Panel will drop down slightly allowing you to fully
RSHQWRLWVGHJUHHRUJUHDWHUSRVLWLRQ7RFORVH¿UPO\
press the LCD Monitor Panel back up into the housing
until a click is heard.
White LED Dome Light
White LED Dome Light connection has polarity. Be
cautious when installing the monitor. Refer to Dome Light
Connection (Page 16).
Back-Lit Function Buttons
Blue, back-lit function button illuminates when the
overhead monitor main power is on. Overhead monitor,
DVD player, DVD-HU and DVB-T/TV tuner can be
controlled by using these buttons.
a
.u
m
o
c
.
0
Remote Control
Overhead Monitor
3
1
White LED Dome Light
TMX-R850 Overhead
Monitor Control
Infrared Wireless
Headphone
Transmitter
LCD Monitor Panel
ALPINE DVD Player
Control
(Refer to DVA-5210
or DVE-5207 Owner’s
Manual)
Back-Lit Function
Button
DIGITAL TV
Monitor Open Button
Dome Light Switch
ALPINE DVB-T-Tuner
Control (Refer to ALPINE
DVB-T-Tuner Owner's
Manual)
ALPINE TV-Tuner Control
(Refer to ALPINE TVTuner Owner’s Manual)
:KHQ\RXXVH5HPRWH&RQWUROIRUWKH¿UVWWLPHSXOOWKH
plastic tape before using the remote control.
4-EN
PKG-850P_EN.indd 4
Autogood products internet store http://130.com.ua
07.12.2006 11:57:40 Uhr
Adjusting the Volume
Overhead Monitor
Control
POWER
SELECT
Volume can be controlled from the headphone or your
own radio volume function.
1
2
DIMMER
Turn on POWER on the headphone.
Adjust the volume level by turning clockwise
for louder and counter-clockwise for lower on
the headphone.
Refer to Wireless Headphone (Page 11)
Switching the Source
Front Panel Controls
1
POWER
2
SELECT
Press SEL on the remote control or SELECT
on the Front Panel Controls to change each
source.
Press SEL/SELECT to switch to the different
sources.
a
.u
DIMMER
MUTE
m
o
c
.
0
Remote Control
Screen Display ON/OFF
Setting the Backlight Brightness
Front Panel Controls
1
2
Press POWER to turn ON.
3
1
To turn off the power, press and hold POWER
again.
• While the power is ON, press POWER to activate the
Mute function.
Remote Control
1
2
• Inside ( ) is default setting. The source name is
selectable. When it is OFF, the source will be skipped.
• OSD (On Screen Display) will be turned off
automatically, when not operating more than 10
seconds.
Press POWER to turn ON.
The brightness of the LCD panel’s backlighting is
adjustable to more closely match the vehicle’s interior
lighting. This makes the screen easier to view.
1
2
Press DIMMER.
Press DIMMER to cycle through the OSD as
HIGH, MID, LOW and HIGH. (Default: HIGH)
To turn off the power, press POWER again
Audio Mute Function
Front Panel Controls
1
2
While the power is ON, press POWER to
activate the Mute function.
Press POWER again turn it OFF the Mute
function.
Remote Control
Press MUTE to turn it ON and OFF.
5-EN
PKG-850P_EN.indd 5
Autogood products internet store http://130.com.ua
07.12.2006 11:57:42 Uhr
Adjusting Picture
Adjusting Color Density
Brightness, color, tint, contrast and sharpness can be
adjustable.
2
3
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds, otherwise
OSD (On Screen Display) will be automatically turned
off.
• When the adjustment is made, “FLAT” setting in Visual
EQ changes to “CUSTOM”. After reset, “CUSTOM”
changes back to “FLAT”
1
4
Front Panel Controls
2
3
3
1
Press S or Tand select BRIGHT.
a
.u
Press S or Tand select TINT.
Press or to adjust the tint. Tint tone can
be adjusted from G15 (G MAX) to R15 (R
MAX).
m
o
c
.
0
Remote Control
Adjusting Brightness
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Tint
SELECT
Press or to adjust the brightness.
Brightness can be adjusted from –15 (MIN) to
+15 (MAX).
4
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Contrast
2
3
4
Press or to adjust the color density.
Change depth can be adjusted from –15 (MIN)
to +15 (MAX).
Press and hold the SELECT button for at
least 2 seconds to open SETUP screen. Make
sure the PICTURE display mode is selected.
SELECT
2
3
Press S or Tand select COLOR.
Press S or Tand select CONTRAST.
Press or to adjust the contrast. Contrast
can be adjusted from –15 (LOW) to +15
(HIGH).
Press the ENT button to finish adjustments
or wait 10 seconds until OSD disappears; the
adjustment will be saved automatically.
4
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
6-EN
PKG-850P_EN.indd 6
Autogood products internet store http://130.com.ua
07.12.2006 11:57:44 Uhr
1
Adjusting Sharpness
2
3
4
Press S or Tand select SHARPNESS.
Press or to adjust the screen quality.
Screen quality can be adjusted from -15
(SOFT) to +15 (HARD).
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
2
Press and hold SELECT for at least 2
seconds to show the SETUP menu.
Press SELECT to switch to DISP MODE
from PICTURE. To change each mode,
press S or T.
Each press changes the display modes as follows:
Resetting the Picture Adjustment
2
a
.u
Press S or T and select RESET.
WIDE
Normal images are expanded uniformly in the
horizontal direction and are displayed over the entire
screen.
m
o
c
.
0
3
Press ENT to reset the picture adjustments.
• If you do not press ENT within 10 seconds, OSD
disappears and the reset adjustments will not be saved.
3
1
Switching Display Modes
ZOOM
Normal images are expanded in the horizontal
direction and are displayed over the entire screen. The
expansion ratio increases towards the right and left
edges of the screen.
Display mode on the screen can be adjusted to Wide,
Zoom, Cinema and Normal.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds,
otherwise OSD (On Screen Display) will be
automatically turned off.
SELECT
CINEMA
Normal images are expanded in the horizontal and
vertical directions. The top and bottom of the image
are cut off. This mode is suited for 16:9 cinema size
images.
Front Panel Controls
NORMAL
Normal image (4:3)
SELECT
3
Press the ENT button to finish adjustments
or wait 10 seconds until OSD disappears; the
adjustment will be saved automatically.
Remote Control
7-EN
PKG-850P_EN.indd 7
Autogood products internet store http://130.com.ua
07.12.2006 11:57:47 Uhr
3
VISUAL EQ Operation
You can select a mode suitable for the subject image.
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
• Each source can be adjusted individually.
• Adjusting should be made within 10 seconds,
otherwise OSD (On Screen Display) will be
automatically turned off.
DIMMER
Front Panel Controls
DIMMER
Remote Control
1
2
a
.u
Press and hold DIMMER for at least 2
seconds to show the VISUAL EQ OSD.
To change VISUAL EQ, press DIMMER or
press S or Tto cycle through the OSD as
FLAT, NIGHT MOVIE, SOFT, SHARP, HIGHT
CONT, and FLAT. (Default: SHARP)
m
o
c
.
0
3
1
VISUAL EQ mode (manufacturer’s settings) selection
(VISUAL EQ MODE)
FLAT:
Normal Setting (Visual EQ OFF)
NIGHT MOVIE: Suitable for movies in which dark
scenes frequently appear.
SOFT:
Suitable for CGs and animated
movies.
SHARP:
Suitable for old movies where
images are not clearly shown.
CONTRAST:
Suitable for recent movies.
• “FLAT” will change to “CUSTOM”, when any of the
picture modes (Brightness, Color, Tint, Contrast and
Sharpness) has been adjusted.
• NIGHT MOVIE, SOFT, SHARP and CONTRAST
DUH¿[HGYDOXHV7KH\FDQQRWEHVHWPDQXDOO\,IWKH
picture mode is changed, they automatically change to
CUSTOM mode.
• To return FLAT mode, press RESET on the picture
mode, or change values of BRIGHT, COLOR, TINT,
CONTRAST and SHARPNESS to 0 manually.
8-EN
PKG-850P_EN.indd 8
Autogood products internet store http://130.com.ua
07.12.2006 11:57:47 Uhr
System Setup Operation
IR transmitter, source names and Audio levels can be
adjusted for all available sources.
• Once this adjustment is made, all sources are affected.
SELECT
ENT
AUDIO LEVEL 2 (Setting for Aux2):
Press and to select HIGH/MID/LOW. (Default:
HIGH)
FACTORY DEFAULT:
Press ENT Key, the system changes to Factory
Default System Setting. Entire settings including
Picture, Visual EQ, Display Mode are also reset.
Customizing Source Name
Front Panel Controls
4
5
ENT
SELECT
Remote Control
1
2
3
<RXUGHVLUHG26'VRXUFHQDPHFDQEHGH¿QHGXSWR
characters.
Press and hold SELECT for at least 2
seconds to show the SETUP menu.
Press SELECT twice to switch to SYSTEM
screen.
6
Press
and
to select USER.
Press ENT key. Character setting menu
appears.
Press S T
and ENT key to select the
characters “A-Z”, “0-9”, “-”, space and “.”.
“DEL”:
“CLR”:
“OK”:
Delete one character at a time.
Clear entire characters.
Confirm source name and exit
from character setting menu.
a
.u
‡ 7KLVVHWWLQJZLOOQRWGLVDSSHDUXQWLOVHOHFWLQJ2.WRH[LW
the screen.
m
o
c
.
0
3
1
Press S or Tto change each mode
IR TRANS:
Press and
to select A/B/OFF. (Default: A)
SOURCE NAME 1:
Press and to select AUX1/DVD/DVD-HU/
DVB-T/TV/GAME/USER (Default: DVD)
SOURCE NAME 2:
Press and to select AUX2/DVD/DVD-HU/
DVB-T/TV/GAME/USER/OFF* (Default: DVB-T)
* When OFF is selected, source selection skips to
WKHQH[WLQSXW$8;FDQQRWEHWXUQHG2))
AUDIO LEVEL 1 (Setting for Aux1):
Press and to select HIGH/MID/LOW. (Default:
HIGH)
9-EN
PKG-850P_EN.indd 9
Autogood products internet store http://130.com.ua
07.12.2006 11:57:49 Uhr
Skipping Backward
DVD Player Control
To control the DVD player and DVD-HU from the Front
Panel Controls, set source names to DVD and DVD-HU
in the System Setup.
• Refer to ALPINE DVD Player/DVD Changer/DVD
Head Unit Operation Manual for details.
MENU
ENT
Press
to skip back to the previous chapter or
track. Press and hold
to fast reverse movie or
music.
Selecting Menu
Front Panel Controls
/
Press MENU to show the DVD Menu. Use
and ENT to control.
Front Panel Controls
Press and Hold MENU to show the DVD SETUP
Menu. Use
and ENT to control.
Remote Control
PLAY/PAUSE
SKIP
BACKWARD
STOP
SKIP FORWARD
MENU
Press MENU to show the DVD Menu. Use
and ENT to control.
When DVD is stopped, press SETUP to show the
DVD SETUP Menu. Use
and ENT to
control.
a
.u
DVD Setup Operation
m
o
c
.
0
DIGITAL TV
Remote Control
Remote Control RUE-4152 cannot be used for
ALPINE DVD Head Unit. It is for DVD player only. To
control the DVD Head Unit, use the remote control
included in DVD Head Unit or ALPINE universal
remote control RUE-4191.
3
1
Playing and Pausing
Press / to play movie or music. Press
to pause.
/
again
The following is common for changing the settings of
ALPINE DVD players.
• 5HIHUWRWKHVSHFL¿F$/3,1('9'3OD\HU'9'
Changer/DVD Head Unit Operation Manual for more
detailed information.
Front Panel Controls
MENU
While in stop mode, press and hold MENU for at least
2 seconds. MENU on Front Panel Controls can be
used for DVD Changer and DVD Head Unit ONLY, not
for DVD Player.
The setup menu appears on the monitor.
Stopping
Press to stop movie. “PRE-STOP” appears on the
screen by single click. Press one more time, “STOP”
appears on the screen.
Remote Control
SETUP
Skipping Forward
Press
to skip ahead to the next chapter or track.
Press and hold
to fast forward movie or music.
Press SETUP when in stop mode.
10-EN
PKG-850P_EN.indd 10
The setup menu appears on the monitor.
Autogood products internet store http://130.com.ua
07.12.2006 11:57:50 Uhr
DVB-T/TV Tuner Control
To control DVB-T/TV tuner from the Front Panel
Controls, set source name to DVB-T/TV in the System
Setup.
Wireless Headphone
Headphone Receivers
• Refer to ALPINE DVB-T/TV Tuner Operation Manuals
for details.
ENT
Front Panel Controls
1) Infrared Sensors; Receive signal from the
transmitter.
2) Battery Cover
3) Volume Control
4) Power Switch
5) Power Indicator LED
DIGITAL TV
a
.u
Remote Control
Operation
m
o
c
.
0
Selecting Preset Channel
Press CH Sor CH T to select preset channel
memorized by ENT on the Front Panel Controls.
3
1
Read carefully to prevent damage to the
headphone or your ears:
WARNING: Before turning on the power, remove
headphones and turn the volume down as low as possible.
1) Be sure the batteries are properly installed in the
headphones.
2) Turn the headphones volume completely down
before placing it on your ears and turning on the
power.
3) Turn on the headphone power and adjust the
headphone volume to a comfortable level (You can
increase the audio source volume if needed).
Battery Installation
Place two AAA batteries into the battery compartment of
the headphone(s), making sure that the battery polarity is
correct.
11-EN
PKG-850P_EN.indd 11
Autogood products internet store http://130.com.ua
07.12.2006 11:57:52 Uhr
Remote Control Battery
Replacement
Information
Battery type: CR2025 battery or equivalent.
In Case of Difficulty
If you encounter a problem, please review the items in the
following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the
rest of your system is properly connected or consult your
authorized ALPINE dealer.
1
Opening the battery case
Slide out the battery cover while firmly pressing in
the direction of the arrow.
No function or display.
• Car's ignition is off.
- Turn the ignition on.
• No fuse or blown fuse.
- Check the cause and replace the fuse.
• Incorrect connections.
- Check connection and remedy.
• Vehicle's battery is weak.
- Check the voltage of vehicle's battery.
2
No picture display.
• Brightness control is set for minimum brightness
control.
- Adjust the brightness.
• Incorrect setting of the mode.
- Switch to the correct mode.
- Check the connection to the source unit.
- Check the power of the source unit.
• Incorrect or open connection with the Monitor, AV
interface unit.
- Check the connection and remedy.
Picture color is poor.
Replacing the battery
Put the battery in the case with the (+) indication
upward as shown in the illustration.
a
.u
• Placing a battery in backwards way may cause a
malfunction.
m
o
c
.
0
3
1
• Brightness/Color/Tint/Contrast/Sharpness control
are not set to the proper positions.
- Check each control.
Spots or dotted lines/stripes appear.
• Caused by neon signs, high-voltage power lines,
CB transmitter, other vehicle's ignition plugs, etc.
- Change the location of your vehicle.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Unit does not operate.
• Monitor's power is not turned on.
- Turn on the monitor's power.
Due to continuous product improvement,
specifications and design are subject to change
without notice.
Warning
DO NOT OPERATE ANY FUNCTION THAT
TAKES YOUR ATTENTION AWAY FROM
SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a
complete stop. Always stop the vehicle in a safe
location before performing these functions. Failure
to do so may result in an accident.
12-EN
PKG-850P_EN.indd 12
Autogood products internet store http://130.com.ua
07.12.2006 11:57:53 Uhr
Accessories
Specifications
Check accessory parts.
Video Display System
DIN Cable (8 pin / 5m)
Power Supply
Connector
DISPLAY SCREEN
Hideaway AV Box
Size
Width
Height
Aspect Ratio
Type
X1
RUE-4152 Universal
Remote Control
X1
SHS-N100 Single
Source Wireless IR
Headphone
NTSC/PAL Compatibility
X1
Installation Bracket*1
System
Number of Elements
Effective Number of
Elements
Back Light
8.5"
184 mm (7.24")
104 mm (4.09")
16 : 9
Transparent type TN
Liquid Crystal Display
TFT-LCD, Active Matrix
480 x 234 x 3
336.960 pixels
99.9% or more
Cold Cathode Fluorescent
Lamp
GENERAL
DIGITAL TV
Operating Voltage
X1
X1
Screws (for
Installation Bracket)
Trim Ring*2
X1
Screws (for Trim Ring)
Power Consumption
a
.u
Video Input
Audio Input
IR Transmitter
m
o
c
.
0
Operating Temperature
X1
X6
X9
Width
Height
Battery , CR2025
(Included in Remote
control)
AAA Battery
X2
8.5 inch LCD Monitor
3
1
X1
MONITOR
10 – 16 V DC
(Typical: 12 V DC)
1.1 A (Power ON)
140 mA (Stand by)
1.0 V p-p 75 ohm
2.0 V rms (Max)
CH A: 2.3 MHz / 2.8 MHz
CH B: 3.2 MHz / 3.8 MHz
- 10 °C to + 60 °C
(+ 14 °F to + 140 °F)
Depth
Weight
209.5 mm (8.25")
37 mm (1.46") [185 mm
(7.28"): Monitor open]
252 mm (9.92")
1.1 kg (2 lbs 6.8 oz)
AV BOX
Width
Height
Depth
Weight
70[84] mm (2.76[3.31]")
21 mm (0.83")
92[112] mm (3.62[4.41]")
220g (7.8 oz)
X1
Installation of Bracket and Trim Ring
x6
*1 Installation Bracket is used to stabilize the monitor
at the time of installing the monitor. Ask ALPINE
dealer for detail.
x9
*2 Trim Ring is used to make the monitor suitable to
your vehicles ceiling shape at the time of installing
the monitor. Ask ALPINE dealer for detail.
13-EN
PKG-850P_EN.indd 13
Autogood products internet store http://130.com.ua
07.12.2006 11:57:58 Uhr
Installation and Connections
Before installing or connecting the unit,
please read the following and pages 2 and
3 of this manual thoroughly for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
)DLOXUHWRPDNHWKHSURSHUFRQQHFWLRQVPD\UHVXOWLQ¿UHRU
product damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
UHVXOWLQ¿UHHWF
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
%HVXUHWRXVHRQO\WKHVSHFL¿HGDFFHVVRU\SDUWV8VHRIRWKHU
than designated parts may damage this unit internally or may not
securely install the unit in place.
This may cause parts to become loose resulting in hazards or
product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED
BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.
a
.u
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
m
o
c
.
0
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
WKHZLUHDQGUHVXOWLQ¿UHRUHOHFWULFVKRFN
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
3
1
Bolts or nuts used for the brake or steering systems (or any
other safety-related system), or tanks should NEVER be used
for installations or ground connections. Using such parts could
GLVDEOHFRQWURORIWKHYHKLFOHDQGFDXVH¿UHHWF
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post
before installing your TMX-R850. This will reduce any
chance of damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to
the diagram. Incorrect connections may cause the unit to
malfunction or damage the vehicle's electrical system.
• When making connections to the car’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power
for this unit. When connecting the TMX-R850 to the fuse
box, make sure the fuse for the intended circuit of the
TMX-R850 has the appropriate amperage. Failure to do so
may result in damage to the unit and/or the vehicle. When
in doubt, consult your ALPINE dealer.
• The TMX-R850 uses female RCA-type jacks for
connection to other units having RCA connectors. You
may need an adaptor to connect other units. If so, please
contact your authorized ALPINE dealer for assistance.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
PD\UHVXOWLQ¿UH
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER
SEAT AIR BAG.
If the unit is not installed correctly the air bag may not function
correctly and when triggered the air bag may cause the monitor to
spring upwards causing an accident and injuries.
IMPORTANT
Please record the serial number of your unit in the space
provided below and keep it as a permanent record. The serial
number plate is located on the rear of the monitor or on the
bottom of the AV interface unit.
SERIAL NUMBER:
____________________________
INSTALLATION DATE:
_________________________
INSTALLATION TECHNICIAN:
__________________
PLACE OF PURCHASE:
_______________________
14-EN
PKG-850P_EN.indd 14
Autogood products internet store http://130.com.ua
07.12.2006 11:57:59 Uhr
Power Connections
ALPINE's TMX-R850 needs the following power
connections to assure proper operation of the monitor.
ACC
Connect this line to the
vehicle's ACC line.
(Switched 12V, ignition)
Red
GND
Black
Connect this line to the
vehicle's GND line.
a
.u
POWER CONTROL
Blue/White
m
o
c
.
0
3
1
White/Brown
Connect this line to the ALPINE
DVD player's ACC line, which
is red.
It controls turning the power
ON/OFF for the ALPINE DVD
player only when AUX1 (source
1) is set to DVD.
REMOTE OUT 1
Corresponds to AUX1. To
control ALPINE DVD player,
DVB-T/TV tuner or DVD-HU,
connect to each REMOTE IN.
REMOTE OUT 2
White/Brown
Corresponds to AUX2. To
control ALPINE DVD player,
DVB-T/TV tuner or DVD-HU,
connect to each REMOTE IN.
REMOTE IN
1. ACC
Red
2. GND
Black
3. POWER CONTROL
Blue/White
4. REMOTE IN
White/Brown
5. REMOTE OUT 1
White/Brown
6. REMOTE OUT 2
White/Brown
White/Brown
To control ALPINE DVD player,
DVB-T/TV tuner or DVD-HU
from LCD monitor in the front
area of the vehicle, connect this
line to the ALPINE LCD monitor
REMOTE OUT.
15-EN
PKG-850P_EN.indd 15
Autogood products internet store http://130.com.ua
07.12.2006 11:58:00 Uhr
Dome Light Connection
Polarity +
When door open
Vehicle
Dome Light Wire
Door signal is 12V
Vehicle Door SW
Door Closed
Door Open
(Red)
Dome Light Wire
Door
(Green)
(Black)
This wire connects the built-in Dome Light to the cable
from the vehicle’s Dome Light Switch.
a
.u
CONN. TO AV BOX
Polarity –
MICRO SW
When door open
m
o
c
.
0
ESP
Vehicle
S2
Door +
SW –
Lamp
J13 CON
3
1
Lamp PCB
Lamp SW
S1
Door signal is GND
Vehicle Door SW
(Red)
Door Closed
Door Open
Door
(Green)
(Black)
S2
Door +
SW -
Lamp
J13 CON
Polarity change switch is located on the top surface
that mounts into the headliner.
Vehicle Door polarity depends on the vehicle type. The
polarity can be changed by the “Door SW polarity”
switch. (Default: Negative Switched System)
Polarity +: When door open, door signal is 12V
Polarity -: When door open, door signal is GND
16-EN
PKG-850P_EN.indd 16
Autogood products internet store http://130.com.ua
07.12.2006 11:58:02 Uhr
System Connections
ALPINE Mobile Multimedia Station
ALPINE Mobile Cinema Monitor
AUX IN
REM. OUT
REM. IN
POWER CONT.
REM. OUT 2
REM. OUT1
AUX OUT
m
o
c
.
0
AUX 2 IN
3
1
REM. IN
ALPINE DVB-T/TV Tuner
a
.u
AUX 1 IN
REM.
IN
ACC
BATT.
GND
ALPINE DVD Player*
GND
ACC
* Some buttons, (Play/Pause for example) may not
be fully functional with DHA-S680P.
1. ACC
Red
2. GND
Black
3. POWER CONTROL
Blue/White
4. REMOTE IN
White/Brown
5. REMOTE OUT 1
White/Brown
6. REMOTE OUT 2
White/Brown
17-EN
PKG-850P_EN.indd 17
Autogood products internet store http://130.com.ua
07.12.2006 11:58:03 Uhr
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement