CG150-2 CAN/USB Gateway Interface Communicator Data Sheet

Add to my manuals
2 Pages

advertisement

CG150-2 CAN/USB Gateway Interface Communicator Data Sheet | Manualzz

Data Sheet

Gateway Interface Communicator

CG150-2 CAN/USB

The Danfoss CG150-2 CAN Interface is an element of the PLUS+1 ® family of mobile machine management products. The CG150-2 provides a compact and cost effective gateway interface between PLUS+1 ®

Compliant modules on the PLUS+1 port.

® Controller Area

Network (CAN) and a personal computer (PC) USB

The CG150-2 communicator provides the application download of programs to PLUS+1 ® Compliant devices on the PLUS+1 ® CAN network and upload/download of application tuning parameters.

Device drivers are imbedded in the PLUS+1 ® GUIDE

(Graphical User Integrated Development

Environment) service and diagnostic tool software.

The CG150-2 is compatible with Bosch CAN standard

2.0 A & B (standard and extended data frames) and

USB standard 2.0 (Hi-speed).

Features

USB powered

Supports CAN bit rates up to 1000 kb per second

CAN messages are time-stamped in 100 ms increments

Supports both 11-bit (CAN 2.0A) and 29bit (CAN 2.0B) identifiers

Supports data and remote frames

Equipped with 110 cm [44 in] length

USB cable and 30 cm [12 in] length CAN cable

Interface the CAN bus with 9-pin D-SUB connector

Designed for USB 2.0 (Hi-speed)

Microsoft Windows XP ® ; 7; and 8 platforms

Plug and Play installation

CAN bus monitor software available at: http://powersolutions.danfoss.com/ products/PLUS-1-GUIDE/PLUS-1software-tools/

Comprehensive technical literature online at powersolutions.danfoss.com

© Danfoss | Jul 2016 L1412468 | AI00000190en-US0102 | 1

Technical data

Dimensions

Power supply

Current consumption

Operating temperature range

Storage temperature range

USB version

Clock accuracy

LED indicators

Bit rate (kb/sec)

CAN physical layer

Galvanic Isolation

Clock syncronization of multiple devices

Maximum message rates msgs/sec

Time stamp (bits)

Error counters reading

Mix 11/29 bit messages

Error frame detection

Error frame generation

Silent mode

Sound indicator

CAN connector

USB cable length

CAN cable length

Auto transmit buffers

Auto response buffers

Load dump protection

Polyurethane cabling

Ordering Information

35 x 165 x 17 mm

USB

(approximately) 90 mA@5V

0° C – 70° C [32° F – 158° F]

-40° C – 85° C [-40° F – 185° F]

2.0 (Hi-speed)

100 μs

2

40 – 1000 Kbits/sec

High speed (ISO 11898-2)

Yes

No

8000

Yes

No

No

No

32

No

Yes

No

Yes

Yes

9-pin male D-SUB

110 cm [44 in]

30 cm [12 in]

No

CG150-2 CAN/USB Gateway Interface Communicator

Status Light

CAN pin configuration

9-pin male connector, front-side view

5

6

3

4

Pin

1

2

7

8

9

Pin 2

Part Number 11153051

Pin 3

Pin 7

-

Function

CAN –

-

-

-

Shield/ Ground

-

-

CAN +

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | Jul 2016 L1412468 | AI00000190en-US0102

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement