LC-32LE260M
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.
LC-32LE260M
Important Safety Precautions
LED BACKLIGHT TV
• Stand base must be attached to prevent the TV set from falling down and cause injuries.
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the
product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the
product.
OPERATION MANUAL
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
Supplied accessories
Remote control unit
“AAA” size battery (g2)
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the
product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed
for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation
is provided or the manufacturer’s instructions are followed.
Operation manual
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
Stand unit
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take
special care near children and pets.
Stand base
Supporting post
• The LCD panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red.
This is within product specifications and does not constitute a fault.
Screws (g 8)
Contents
Page
Supplied accessories ...........................1
Dear SHARP customer.........................2
Important Safety Precautions .............2
Trademarks ...........................................2
Attaching the stand ..............................3
Antenna connection .............................3
Connecting external devices ...............4
Remote control unit .............................5
Part names ............................................6
Turning the TV on/off ...........................6
Initial auto installation ..........................7
Auto Installation....................................7
Programme Setup ................................7
Selecting a preset AV Mode ................8
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry
the TV by two people holding it with two hands — one hand on each side of the TV.
Page
Menu operation.....................................9
Picture menu .........................................9
Audio menu ...........................................9
ECO menu ...........................................10
Setup menu .........................................10
Option menu .......................................11
Colour adjustment ..............................11
ECO mode ...........................................12
Timer ....................................................12
Wide mode ..........................................12
USB media player ...............................13
Appendix .............................................15
Specifications .....................................16
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT
terminal on the rear of the product.
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Printed in Malaysia
TINS-G236WJZZ
14P09-MA-NF
1
LC-32LE260M_G236_EN.indd 1
2
7/2/2014 4:49:08 PM
Attaching the stand
Connecting external devices
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
Soft cushion
Confirm the screws supplied with the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Screws (m8)
2
2
Fix the supporting post into the holes on the rear of
the TV. (1)
Insert and tighten the four screws into the holes. (2)
3
Insert the stand base to the stand post on the
bottom of the TV. (3)
4
Insert and tighten the screws into the holes on the
rear of the TV. (4)
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 3 or INPUT 4 terminals.
When using component cable
When using composite cable
(commercially available)
(commercially available)
1
Y
PB
(CB)
PR
(CR)
NOTE
• To detach the stand, perform the steps in reverse order.
CAUTION
• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious
personal injuries as well as damage to the stand.
L
1
AUDIO
2
R
1
2
3
or
L
4
L
AUDIO
AUDIO
R
R
VCR/Game
console/Camcorder
VCR/Game
console/Camcorder
Insert this point
Connecting a DVD player/Digital TV STB (Set Top Box)
Antenna connection
You can use the INPUT 1 (HDMI)/INPUT 2 (HDMI) or INPUT 3 terminals when connecting to a DVD player/
Digital TV STB (Set Top Box) and other audiovisual equipment.
When using HDMI-certified cable
When using component cable
(commercially available)
(commercially available)
Connect antenna cable to the antenna terminal
1
1
or
Y
PB
(CB)
PR
(CR)
1
2
2
2
L
DVD player/
Digital TV STB
(Set Top Box)
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug
(IEC 169-2), plug it into the antenna jack at the
rear of the set.
AUDIO
R
DVD player/Digital TV
STB (Set Top Box)
Connecting a PC
If your outdoor antenna uses a 300-ohm twinlead flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
Connecting a USB device
You can use the INPUT 1 (HDMI)/INPUT 2 (HDMI)
terminal when connecting to a PC.
Connect a USB device to the TV.
USB
1
CAUTION
1
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
2
2
NOTE
PC
• Place the TV close to the AC outlet, and keep the power plug within reach.
3
LC-32LE260M_G236_EN.indd 2
2
1
CAUTION
• Do not disconnect a USB device from the TV while
transferring files, when a screen is in “USB” mode.
4
7/2/2014 4:49:08 PM
Remote control unit
1
2
3
4
13
TIMER
14
5
6
15
7
16
8
17
9
18
10
11
19
Part names
7 AV MODE
Select an audio and video setting. (See page 8.)
TV (Front)
8 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
POWER indicator
9 e (Mute)
Press e s Mutes sound.
Press e again s Restores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by
pressing VOL k.
Light off
Lighted (Red)
Lighted (Green)
Power off.
The TV is in standby mode.
The TV is on.
TV (Rear)
10 a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
1
2
11 WIDE
Change the wide image mode. (See page 12.)
12
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 6.)
2 COLOUR ADJ.
Adjust the colour tone of the image on screen.
(See page 11.)
3 DISPLAY
Display the channel or input information.
4 TIMER
Set the Sleep Timer and Reminder. (See page 12.)
5 0–9
Set the channel.
6 A (Flashback)
Press A to return to the previous selected channel
or external input mode.
4
3
6
5
13 ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
INPUT 1 (HDMI) terminal
INPUT 2 (HDMI) terminal
USB terminal*
Antenna input terminal
INPUT 4 terminals
INPUT 3 (COMPONENT/AV INPUT) terminals
SERVICE ONLY terminal**
/AUDIO output (R/L) terminal
POWER (On/Off) button
Keypad control
JOG-KEY
14 PHOTO
Display your pictures directly on the TV screen. (See page 13.)
15 INPUT (INPUT SOURCE)
Select an input source.
16 CHr/CHs
TV input mode: Select the channel.
(CHr) Increase the channel number.
(CHs) Decrease the channel number.
POWER
9
10
17 MENU
Display the menu screen.
7
18 MPX
Select the sound multiplex mode.
8
BASIC
FUNCTION
FUNCTION
DURING MENU
*
r
CH UP
r
s
CH DOWN
s
*
+
VOL UP
+
*
–
VOL DOWN
–
*
b
(BELOW 1 SEC)
INPUT
SELECT/ENTER
b (1 SEC AND
MENU
OVER)
RETURN/MENU
EXIT
* Repeat keys
* USB terminal use for USB Media Player. (See page 13.)
** Usually do not connect anything to this terminal as it is reserved only for service personnel.
19 RETURN
MENU mode: Return to the previous menu screen.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
Turning the TV on/off
1
Turning on/off the power
Open the battery cover.
2
USB
12 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select the
coloured items on the screen.
1
2
3
4
5
6
7
8
9
10
1
2
Insert the two supplied “AAA” size
batteries.
3
Close the battery cover.
• To turn on the power
Press POWER on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV.
Standby mode
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery compartment.
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
5
LC-32LE260M_G236_EN.indd 3
6
7/2/2014 4:49:08 PM
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
1
Press POWER on the TV.
• The initial auto installation wizard appears.
2
Press a/b/c/d to select the desired
language, and then press ENTER.
3
Press c/d to select “HOME” or “STORE”, and
then press ENTER.
Press a/b to select the desired sound system,
and then press ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto
search.
NOTE
• HOME mode: Settings are optimised for normal home
viewing and energy efficiency.
• STORE mode: Settings are designed for maximum impact
in retail store displays.
• To change the STORE mode to HOME mode, please refer
to page 10 to reset the unit.
Programme Setup
Programme Setup (Continued)
H Colour system
Select the optimum colour system to receive. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
Auto Search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
1
2
3
4
H Sound system (Broadcasting system)
Select the optimum sound system (Broadcasting
system) to receive. (B/G, D/K, I, M)
Press MENU and the MENU screen displays.
H Label
To enter the name of the channel. Maximum 5
alphanumeric can be input.
Press c/d to select “Setup”.
Press a/b to select “Programme Setup”, and
then press ENTER.
• Press a/b: To select a desired alphanumeric.
If you have already set the password, enter it
here.
• Press c/d: To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
• See page 10 for setting a password.
5
Press a/b to select “Auto Search”, and then
press ENTER.
6
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select the desired sound system,
and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
NOTE
You can set some channel item manually.
1
2
3
4
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Auto Installation”, and
then press ENTER.
If you have already set the password, enter it
here.
• See page 10 for setting a password.
5
Press c/d to select “Yes”, and then press
ENTER.
6
Press a/b/c/d to select the desired
language listed on the screen, and then press
ENTER.
Press a/b to select the desired sound system,
and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
H Lock
You can block the viewing of any channel. (On, Off)
Manual Adjust
Auto Installation
You can run auto installation again, even after setting
up the preset channels.
H Skip
Channels with “Skip” set to “On” are passed
over when using CHr/s even if selected while
watching the image from the TV. (On, Off)
1
2
3
4
Repeat steps 1 to 4 in Auto Search.
Press a/b to select “Manual Adjust”, and then
press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
• See “Child Lock” for setting a password.
• If “Lock” is set to “On” for a channel, “Child lock has been
activated” is displayed when you select the channel, and
the image and sound of the channel is blocked.
• When pressing ENTER while “Child lock has been
activated” is displayed, password input menu will be
displayed. Inputting the correct password lifts the child
lock temporarily until the power is turned off.
Sort
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
1
2
Repeat steps 1 to 4 in Auto Search.
3
Press c/d to select “Yes”, and then press
ENTER.
H Search
The next channel will be searched in order.
4
Press a/b/c/d to select the channel you
want to move, and then press ENTER.
H Fine
You can adjust the frequency to your desired position.
5
Move it to the desired position by pressing
a/b/c/d, and then press ENTER.
6
Repeat the steps 4 and 5 until all desired
channels are sorted.
6
The individual programme can be erased.
1
2
Repeat steps 1 to 4 in Auto Search.
3
Press c/d to select “Yes”, and then press
ENTER.
4
Press a/b/c/d to select the channel you
want to erase, and then press ENTER.
5
6
Press ENTER to erase the channel.
Press a/b to select “Erase Programme”, and
then press ENTER.
Repeat the steps 4 and 5 until all desired
channels are erased.
Selecting a preset AV Mode
“AV Mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1
2
Press AV MODE.
Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV Mode”
menu on the “Picture” menu screen.
Selected item
Press a/b to select the desired menu, and
then press ENTER.
Press a/b to select the desired item or adjust
the item to the desired level. Press ENTER if
necessary.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 — 9.
Press a/b to select “Sort”, and then press
ENTER.
Description
STANDARD
For a highly defined image in a normally
bright room.
MOVIE
For a movie.
PC
For PC. (Available only when receiving a
PC signal via INPUT 1 (HDMI)/INPUT 2
(HDMI) terminal.)
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
Channel position can be sorted freely.
• The selected channel information displays.
5
Erase Programme
NOTE
• You can select a different AV Mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
7
LC-32LE260M_G236_EN.indd 4
8
7/2/2014 4:49:09 PM
Menu operation
1
Press MENU and the MENU screen displays.
H Eagle View*
“Eagle View” technology produces a sharp picture
from the original moving picture. (“On”, “Off”)
Backlight
[STD] –16
+16
H AquoMotion Lite*
“AquoMotion Lite” technology provides superior
solutions for display picture quality removing motion
blur. (“Advanced”, “High”, “Off”)
Contrast
Brightness
[+20] 0
[
0] –30
+40
+30
*
Colour
[
+30
Picture
Audio
ECO
[ STANDARD]
AV Mode
0 ] –30
2
Press c/d to select the desired menu. (Picture,
Audio, ECO, Setup, Option)
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
5
Press RETURN as necessary to return to the
previous MENU.
Press MENU to exit the MENU.
Selected item
Backlight
c button
The screen dims
d button
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness For more
brightness
Colour
For less colour
intensity
Tint
Skin tones become Skin tones become
reddish
greenish
Sharpness
For less sharpness For more
sharpness
For more colour
intensity
1
2
Repeat steps 1 to 3 in Setting a password.
• Five minutes before the power shuts down, the remaining
time displays every minute.
3
Press c/d to select “Yes”, and then press
ENTER.
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
H No Operation Off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
Audio menu
• Five minutes before the power shuts down, the remaining
time displays every minute.
H Audio adjustments
Treble
c button
For weaker treble
Setup menu
d button
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
Press a/b to select “Clear password”, and
then press ENTER.
NOTE
• This effect is greater on fast moving images.
• This function will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred or flickering, set to “Off”.
Selected item
Clearing the password
Allows you to clear your password.
H No Signal Off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
NOTE
Picture menu
H Picture adjustments
ECO menu
H Surround
When you set to “On”, you can enjoy surround
sound, the same as if you were in a movie theatre.
(On, Off)
NOTE
• For resetting all Audio adjustment items to the factory
preset values, press a/b to select “Reset”, press
ENTER, press c/d to select “Yes”, and then press
ENTER.
Enable/
Disable
Description
Set whether or not to use the Auto
Selection of WIDE MODE based on signal
recognition received from the HDMI
signal.
H Quick Start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Selected item
On
The TV quickly starts up from standby,
more of power consumption is required
during standby.
Setting a password
Off
Power consumption is less than 1 W.
1
2
Repeat steps 1 to 2 in Menu operation.
3
4
If you already set the password, enter it here.
5
Enter the 4-digit number as a password using
0 — 9.
6
Enter the same 4-digit number as in step 5 to
confirm.
Press a/b to select “Child Lock”, and then
press ENTER.
Press a/b to select “Change password”, and
then press ENTER.
NOTE
NOTE
Selected item
H Child Lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter a
password. When you select a locked channel, “Child lock
has been activated” is displayed.
• Press ENTER to display the password input window.
• For resetting all Picture adjustment items to factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
H HDMI Auto View (HDMI input mode only)
Description
H Language
Select from among 10 languages: English, Simplified
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
H Identification
You can check the current version of the software on
the screen.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as Picture,
Audio and Programme will be reset to the factory preset
values.
H DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Off, High, Low, Auto)
9
LC-32LE260M_G236_EN.indd 5
10
7/2/2014 4:49:09 PM
Option menu
H Input Select
For setting the signal type of external equipment.
Input source
INPUT3
Selectable item
COMPONENT, VIDEO
H Audio Output Select
You can select which device is used for outputting
audio.
Option
Description
Headphone
Output audio through headphones.
Audio Out
Output audio through an A/V receiver or
surround audio controller.
NOTE
• If you select “Headphone” when a cable is inserted in
the OUTPUT terminal, the TV speakers are muted and all
Audio menu items cannot be adjusted.
• If you select “Audio Out”, sound via the OUTPUT terminal
is not adjustable and constantly outputs.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they
are not in use.
Volume display when headphones are plugged in
H Audio Only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item
Audio is output without screen image.
Off
Both screen images and audio are
output.
CAUTION
H Auto Volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto Volume solves this
problem and equalises the volume levels. (On, Off)
Selected item
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to “Off”.
H Colour System (AV input mode only)
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
Description
ECO 1
Reduces the backlight brightness.
ECO 2
Reduces the backlight brightness more
than “ECO 1”.
ECO off
Normal setting of backlight brightness.
You can select different picture sizes that account for
the kind of each pictures manually.
1
2
3
Press MENU and the MENU screen displays.
4
Press a/b while the WIDE MODE menu
displays on the screen.
Press c/d to select “Picture”.
Press a/b to select “Wide mode”, and then
press ENTER.
• As you toggle down the options, each mode is
immediately reflected on the TV.
ECO status will be displayed on the channel
information window.
Selected item
Timer
NOTE
• If “Auto” is selected, colour system is automatically set.
If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• “Colour System” is selectable only when inputting a
composite signal.
Colour adjustment
Press TIMER to set the Sleep Timer or a Reminder
for an activity.
H Sleep Timer
This function is conveniently used when, for instance,
going to bed while watching TV.
(Off, 0 hr. 30 min., ……, 2hr. 30 min.)
1
Press COLOUR ADJ., the colour adjustment
screen will display.
2
Press a/b/c/d to adjust the colour to your
desired setting.
For 4:3 “standard” pictures. A side bar
appears on each side.
Panorama
In this mode the picture is progressively
stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Underscan
Display with an Underscan image only
when receiving a 720p/1080p/1080i
signal. Display with the High-Definition
image adjusted optimally. Noise may
appear on the edge of the screen with
some programmes.
Dot by Dot
Display an image with the same number
of pixels on the screen.
NOTE
• If you turn off the TV, the counter will be reset.
• The (Reminder) function does not work in USB mode.
Description
Normal
H (Reminder)
This function is to set a reminder for an activity.
Press a/b or ENTER to set.
Allows you to adjust the colour tone of the image
displayed on the screen.
30
• OUTPUT terminal is also used for headphones. Reduce
the volume before using headphones. Overwhelming
sound may damage your hearing.
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Description
On
Wide mode
ECO mode
NOTE
Button
a
White with greenish tone.
b
White with reddish tone.
c
White with bluish tone.
d
White with yellowish tone.
G
Reset setting.
B
Exit the setting screen.
ENTER
• You can also select an item by pressing WIDE on the
remote control unit.
• Some picture sizes may not be displayable depending on
the input signal.
Description
Save setting.
NOTE
• The colour adjustment screen will automatically goes out
after 30 minutes.
11
LC-32LE260M_G236_EN.indd 6
12
7/2/2014 4:49:09 PM
Buttons for thumbnail operations
USB media player
Buttons
Press INPUT to select the “USB” mode or the TV
automatically switches to the USB mode when a
USB device is connected to the TV.
NOTE
• “Wide mode” is fixed during “Photo mode” and “Music mode”.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• Use only alphanumeric characters for naming files.
• The file name can only be displayed up to 17 characters.
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• The compatibility of USB HDDs may not be guaranteed.
• Multi drive USB is not supported.
H Selecting modes
USB media player
Select mode
Photo mode
:Select
ENTER
ENTER
:Enter
1
Press c/d to select between “Photo mode”
and “Music mode”.
2
Press ENTER.
Music mode
When selecting a folder icon: Enter this
directory.
When selecting a photo thumbnail:
Display the photo in full screen.
a/b/c/d
(Cursor)
Select a desired item.
RETURN
Return to the USB select mode.
Y button
Selecting BGM (Background music).
B button
Slide show.
Select Photo
2009:07:14
12:52:13
8217 KB
64Kbps
: Classical.mp3
:Select
\Natures
Page
..
turtle.jpg
mountain.jpg
sunset.jpg
2011:01:15
14:30:12
1723 KB
2253x1496
:Select
ENTER :Display photo RETURN :Back
Y :Selecting BGM B :Slide show
:Back
R :Stop
G :Play/Pause
B :Audio Only
2
Press a/b/c/d to select the desired folder or
page, and then press ENTER.
H Viewing photos in full screen
Buttons for full screen display operation
3
Press a/b/c/d to select the desired music or
page, and then press ENTER.
Description
USB device/
File system
USB Memory / FAT/FAT32
Photo file format
JPEG (.jpg) (DCF2.0 compliant).
Progressive format of jpeg files
are not supported.
Music file format
(Files may not be
playable depending
on the bitrate)
MP3 (.mp3) Bitrate: 32 k, 40 k,
48 k, 56 k, 64 k, 80 k, 96 k,
112 k, 128 k, 160 k, 192 k, 224 k,
256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k,
48 kHz
Go to the previous/next photo in the
same directory.
RETURN
Return to the photo thumbnails.
R button
Rotate the photo by 90 degrees to the
left.
G button
Rotate the photo by 90 degrees to the
right.
a/b/c/d
(Cursor)
Select a desired item.
B button
Reveal/hide the guide display.
RETURN
Return to the USB select mode.
R button
Stop music.
G button
Play/Pause music.
B button
Audio only.
Buttons
ENTER
• Rotating photos only applies to the temporarily selected
item and this setting is not saved.
H Photo slide show
When you press PHOTO, the TV screen will
automatically play the photo slide show.
NOTE
• The maximum picture resolution can be shown is only
1024 x 768 (for WXGA).
If you insert a higher resolution picture into the USB, the
picture will be resized into half by actual resolution.
a
• Original picture resolution: 2048 x 1536
Resized picture resolution (on screen): 1024 x 768
Buttons for music mode
a/b/c/d
(Cursor)
Description
When selecting a folder icon: Enter this
directory.
When selecting a music file: Play the
music.
NOTE
• When there are invalid music files, “Audio data is invalid”
will be displayed for the file.
Buttons for slide show operation
Buttons
Description
RETURN
Exit slide show.
2
Press a/b/c/d to select the desired folder or
page, and then press ENTER.
R button
Change the slide show duration mode.
(1 hr., 3 hr., Continuous)
3
Press a/b/c/d to select the desired photo or
page, and then press ENTER.
G button
Change the photo display mode.
(3 sec., 5 sec., 10 sec., 1 min.)
Y button
Turn on/off the background music.
B button
Reveal/hide the guide display.
NOTE
• The TV will automatically power off after the selected slide
show duration ends.
• If there is no USB drive, the TV will switch to Selecting
modes screen.
• Photo slide shows will autoplay only for the photos located
on the top layer of USB drive.
• Background music will autoplay during a slide show only if
the music file is located in the same folder with the photo
files.
13
LC-32LE260M_G236_EN.indd 7
RETURN
• When there are invalid photo files, “Image data is invalid”
will be displayed for the file.
Press c/d to select “Photo mode”, and then
press ENTER.
• To display guide, press the B button.
R/G/Y buttons will function only when the guide is
displayed on the screen.
:Play
Press c/d to select “Music mode”, and then
press ENTER.
1
NOTE
ENTER
1
NOTE
1/1
Page
..
Classical.mp3
Techno.mp3
Mozart.mp3
Photo mode
H Viewing thumbnails
1/1
Select Music
List of files compatible with USB mode
File name
\Music
NOTE
Buttons
Music mode
USB media player (Continued)
Description
14
7/2/2014 4:49:09 PM
Appendix
Specifications
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem
• No power.
• Unit cannot be operated.
• Remote control unit does not
operate.
Possible Solution
• Check if you pressed POWER on the remote control unit. (See page 6.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 6.)
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
•
•
•
•
• Are screen mode adjustments such as picture size made correctly? (See page 12.)
• Strange colour, light colour, or
dark, or colour misalignment.
•
•
•
•
• No picture.
80 cm
1,049,088 pixels (1366 g 768)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
TV-Standard
Function
Receiving VHF/UHF
Channel
CATV
43.25—863.25 MHz
STEREO/BILINGUAL
NICAM: B/G, I, D/K A2 stereo: B/G
H : 176º V : 176º
5 Wg 2 / 4 g 7 cm 2pcs
Antenna input
UHF/VHF 75 q DIN type
INPUT 1 / INPUT 2
HDMI (HDMI input, PC input)
INPUT 3
VIDEO in, AUDIO in, COMPONENT in
INPUT 4
VIDEO in, AUDIO in
OUTPUT
AUDIO out, Headphone (
USB
USB
3.5 mm stereo)
USB device/File system
USB Memory / FAT/FAT32
Photo file format
JPEG (.jpg) (DCF2.0 compliant). Progressive format jpeg files are not supported.
Music file format
(Files may not be playable
depending on the bitrate)
MP3 (.mp3) Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k,
192 k, 224 k, 256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
OSD language
English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
AC 110—240 V, 50/60 Hz
• No sound.
• Is the volume too low? (See page 5.)
Power Requirement
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
Power Consumption
Dimensions
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
S1—S41ch (including Hyperband)
Auto Preset 99 ch
Adjust the picture tone. (See page 9.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 8, 11.)
Check the “HDMI Auto View” setting. (See page 10.)
Cautions regarding use in high and low temperature environments
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
TV-Tuning System
Terminals
Is the connection to external equipment correct? (See page 4.)
Is the picture adjustments correct? (See page 9.)
Is the antenna connected properly? (See page 3.)
Is “On” selected in “Audio Only”? (See page 11.)
LC-32LE260M
Resolution
Audio amplifier/Speakers
• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the “ECO” setting. (See page 10.)
• Is the sleep timer set? (See page 5.)
•
•
•
•
LCD panel
Viewing angles
Are batteries inserted with polarity (e, f) aligned? (See page 5.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light shining on the remote control sensor?
• Picture is cut off.
• Power is suddenly turned off.
Model
Item
41 W (1.0 W Standby)
without stand
with stand
739 (W) g 440 (H) g 93 (D) mm
739 (W) g 482 (H) g 174 (D) mm
Weight
5.7 kg (without stand) / 6.5 kg (with stand)
Operating Temperature
0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
CAUTION
Clearing the password
1
2
3
4
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
Repeat steps 1 to 2 in Setting a password. (See page 10.)
The password input screen displays.
If you enter “3001” using 0 – 9, the “Child Lock” setting menu will be displayed.
Enter the 4-digit number as a password using 0 – 9. The new password is now set.
15
LC-32LE260M_G236_EN.indd 8
16
7/2/2014 4:49:09 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement