G 2600 FH G 2800 FH

Add to my manuals
15 Pages

advertisement

G 2600 FH G 2800 FH | Manualzz

G 2600 FH

G 2800 FH

English 2

Español 15

Français 28

®

8.751-847.0 02/12A

HIGH PRESSURE WASHER OPERATOR MANUAL

Model Overview

Important Safety Instructions

Assembly Instructions

Operating Instructions

Using the Accessories

Working With Detergents

Taking a Break

Shutting Down & Clean-Up

Winterizing and Long-Term Storage 11

Maintenance Instructions 11

Cleaning Tips 11

Troubleshooting 13

9

10

10

5

7

9

3

4

Safety Alert Symbols

DANGER

Indicates “an imminently hazardous situation which, if not avoided, will result in death or serious injury.”

WARNING

Indicates “a potentially hazardous situation which, if not avoided, could result in death or injury.”

CAUTION

Indicates “a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage incidents.”

Specifi cations

G 2600 FH

Operating Pressure

Water Volume

Detergent Suction

Engine

Part No.

Serial No.

G 2800 FH

Operating Pressure

Water Volume

Detergent Suction

Engine

Part No.

Serial No.

2600 PSI

2.5 GPM

.15 - .20 GPM

Honda GCV 160

1.107-187.0

2800 PSI

2.5 GPM

.15 - .20 GPM

Honda GCV 160

1.107-188.0

Owner/User Responsibility

The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer.

Warning information should be emphasized and understood. If the operator is not fl uent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner and/or user must study and maintain for future reference the manufacturer’s instructions .

Kärcher Customer Support USA/

Canada

Call: 1-800-537-4129 for help or visit our website: www.karcherresidential.com

Please take a moment to register your pressure washer online at: www.karcher-register.com

Kärcher Customer Support

México

Call: 01-800-024-13-13 for help or visit our website: www.karcher.com.mx

2 English

11

7

MODEL OVERVIEW

12

4

1

10

3

2

5

8

9

1. Handle

3. Trigger Gun Safety Lock

4. High Pressure Hose

6

8. Water Inlet With Garden Hose Connector

9. Quick Connect High Pressure Outlet

10. Detergent suction tube with fi lter

11. Dipstick

12. Quick Connect Nozzles

For Engine Details See Engine Manual

English 3

WARNING

IMPORTANT SAFETY INSTRUCTIONS

■ Read the operating instructions of the engine manufacturer before start-up and follow the safety instructions carefully.

■ Do not use acids, solvents, or any fl ammable or alkaline material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.

When using this product, basic precautions should always be followed, including the following:

Read all instructions before using product.

To reduce the risk of injury, close supervision is necessary when a product is used near children.

Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.

■ Stay alert – watch what you are doing.

Do not operate when fatigued or under the infl uence of alcohol or drugs.

■ Keep operating area clear of all persons.

Do not overreach or stand on unstable support. Keep good footing and balance at all times.

■ Wear safety goggles and ear protection.

■ Follow the maintenance instructions specifi ed in the manual.

■ To avoid risks, all repairs and replacement of spare parts should only be carried out by trained personnel.

WARNING

Gun Kicks Back – Hold with both hands.

■ The Trigger Gun Safety Lock prevents the trigger from accidentally being engaged. This safety feature must be engaged when replacing nozzles or not in use.

WARNING

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Operation of this equipment may create sparks that can start fi res around dry vegetation. A spark arrestor may be required.

Operator should contact local fi re agencies for laws or regulations.

CAUTION

Risk of Asphyxiation – Use this product only in a well ventilated area.

■ Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or fl ame such as boilers, water heaters, etc.

CAUTION

WARNING

Risk of Fire – Do not add fuel when the product is operating or still hot.

Risk of Injection or Injury – Do Not Direct

Discharge Stream At Persons.

■ High pressure jets can be dangerous if misused. The jet must not be directed at persons, animals, electrical devices, or the unit itself.

CAUTION

DANGER

Do not spray electrical connections, electrical outlets or fi xtures.

WARNING

Risk Of Explosion –Do not spray fl ammable liquids. Operate only where open fl ame or torch is permitted.

4 English

Risk of fi re - Do not put container with fl ammables products into the nozzle holder.

■ Do not operate if fuel has been spilled. Instead, move machine to different location and avoid creating sparks.

■ This machine has hot surfaces which can cause burns. Operate in a safe environment and away from children.

■ Do not touch hot surfaces or allow accessories to contact hot surfaces.

■ Do not leave machine running unattended.

■ Avoid tipping machine on its side.

SAVE THESE INSTRUCTIONS

CAUTION

When connecting to water supply mains, local regulations of your municipal water company must be observed. In some areas connecting directly to public drinking water supply may require a backfl ow prevention device. This is to ensure that there is no feedback of chemicals into the water supply. Use a water fi lter to avoid potential damage from dirt in the water supply.

■ Garden hose must be at least 5/8 inch diameter.

■ Flow rate of water supply must not fall below

2.5 GPM (gallons per minute)

WATER SUPPLY

(Cold Water Only)

■ Flow rate can be determined by running the water for one minute into an empty 5-gallon container.

■ The water supply temperature must not exceed 104°F/40°C.

■ Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.

■ Always prevent debris from being drawn into the unit by using a clean water source. Use additional water fi lter.

■ Do not operate pressure washer without the water turned on.

ASSEMBLY INSTRUCTIONS

Hardware (included)

A

Description

Knob 1/4"

Purpose

Joint Assembly

Illustration Qty

2

B

C

D

1/4" X 1-1/2"

Bolt

1/4" X 2-1/2"

Bolt

Joint Assembly

Wand Holder Assembly

Wand Holder Wand Holder Assembly

E Nozzle Holder Nozzle Holder Assembly

1

1

1

1

F High Pressure

Hose

Spray Gun Assembly 1

English 5

G

H

I

J

Description

Spray Gun

Quick

Connect

Nozzle

Kit (5 pc.)

Wand

Nylon Rivet

Hardware (included)

Purpose

Spray Gun Assembly

Nozzles Kit Assembly

Wand Assembly

Gun Holder Assembly

Illustration

Assembling

STEP 1:

Scan QR Code with smartphone for detailed instructions

STEP 3:

Attach the handle to the frame of the pressure washer. Align holes, insert bolts (B)(C), insert wand holder (D) and tighten with knobs (A).

Place the quick connect nozzles (H) in the nozzle holder (E) following the color instruction.

H E

B

C

D

A

STEP 2:

Mount the nozzle holder (E) to the handle of the pressure washer. Align holes and insert nylon rivet (J).

E

STEP 4:

Attach the wand to the spray gun.

Push the wand (I) into the trigger gun (G) and then thread the connection.

J G

I

6 English

Qty

1

1

1

4

Assembling

STEP 5:

Place the Spray Gun (G) into the Gun Holder

(E) and the Wand (I) into the Wand

Holder (D).

E

G I

D

OPERATING INSTRUCTIONS

STEP 1:

Pull the spring-loaded collar of the wand back to insert your choice of quick connect nozzle.

STEP 2:

Pull back the spring loaded collar at the spray gun and insert the high pressure hose.

Release the collar and push the nozzle until the collar clicks .

Release the collar and push the nozzle until the collar clicks.

CAUTION

High pressure in nozzle area.

Risk of injury caused by improperly locked nozzle.

■ Make sure you hear a "click" when inserting the nozzle tip into the wand.

■ Pull the nozzle to make sure it is seated properly before operating your unit.

CAUTION

High pressure in quick connect area.

Risk of injury caused by improperly locked high pressure hose.

■ Make sure you hear a "click" when inserting the high pressure hose into the quick connection.

■ Pull the high pressure hose to make sure it is seated properly before operating your unit.

English 7

OPERATING INSTRUCTIONS

CAUTION

Engine shipped without oil. Before starting engine, fi ll with oil. Do not over-fi ll. Do not run the engine with a high or low oil level as this can cause engine damage.

If you have further questions regarding the engine, please refer to the engine manual included with the unit.

CAUTION

High pressure in quick connect area.

Risk of injury caused by improperly locked high pressure hose.

Make sure you hear the "click" when inserting the high pressure hose into the quick connection.

■ Pull the high pressure hose to make sure it is seated properly before operating your unit.

Check oil level. Oil level should always be between the "FULL" and "ADD" or "MAX" and

"MIN" marks on the dipstick as shown in the picture below.

Connect garden hose to unit`s water inlet.

FULL / MAX

ADD / MIN

Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades).

We recommend that the oil be changed after the fi rst 5 hours of use, then once every 50 hours.

Connect garden hose to the cold water source and turn water completely on.

Fill gas tank with unleaded gasoline.

Do not use leaded gasoline.

Do not add oil to the gasoline.

Release the collar and push the high pressure hose until the collar clicks

.

Do not use hot water.

Pull back the spring loaded collar at the high pressure outlet and insert the high pressure hose.

Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady fl ow of water to emerge from the spray nozzle.

STEP 9:

Open fuel valve. Pull the choke rod to the ON position (on a warm engine, leave the choke rod in the OFF position).

STEP 10:

Move the engine stop switch to the ON position.

STEP 11 (RECOMMENDATION)

Hold the handle strongly and position a foot on the machine as shown in the pictures below.

8 English

For engine details see engine manual.

OPERATING INSTRUCTIONS

STEP 12:

Pull the starter handle. If the engine fails to start after 3 pulls, squeeze the trigger gun to release pressure, and repeat step.

After the engine warms up enough to run smoothly move choke rod to OFF position.

USING THE ACCESSORIES

Quick connect nozzles

The color-coded quick connect nozzles provide a wide array of spray widths from 0° to 65° and are easily accessible when placed in the convenient nozzle holder.

0° spray angle = Red nozzle

For particularly stubborn accumulation of grime.

Not recommended for soft materials like sidings, decks, painted surfaces, cars.

40° spray angle = White nozzle

For moderate dirt accumulation over a large surface.

65° spray angle = Black nozzle

For operating with detergents or cleaning with low pressure.

15° spray angle = Yellow nozzle

For dirt accumulation over a surface.

25° spray angle = Green nozzle

For dirt accumulation over a large surface.

CAUTION

High pressure in nozzle area. Risk of injury caused by improperly locked nozzle.

Make sure you hear the "click" when inserting the nozzle tip into the quick connection.

■ Pull the nozzle to make sure it is seated properly before operating your unit. (See

OPERATING INSTRUCTIONS: Step 1)

WARNING

To avoid serious injury never point spray nozzle at yourself, other persons or animals.

WORKING WITH DETERGENTS

STEP 3:

Detergents can only be applied with the black detergent nozzle.

With the engine running, pull trigger to operate unit.

Install the black detergent nozzle for detergent application at low pressure.

Fill a container with Kärcher detergent.Place the fi lter end of detergent suction tube into the container.

Liquid detergent is drawn into the unit and mixed with water.

Apply detergent to work area.

Do not allow detergent to dry on surface.

STEP 4:

Always draw fresh water through the detergent suction tube when the cleaning job is done, to rinse/fl ush any remaining detergents from the injection system.

For best results see Cleaning Tips for specifi c information on how to clean different surfaces.

English 9

Detergents

CAUTION

This unit has been designed for use with cleaning detergents recommended by the manufacturer.

The use of other cleaning detergent may affect the operation of the machine and void the warranty.

Always Use Kärcher Detergent for Best Results

Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. The special formula won`t clog the suction tube fi lter and will protect the internal parts of the pressure washer for a longer life. For

Kärcher Detergents, check your retailer or visit our website: www.karcherresidential.com

CAUTION

Never use:

– Bleach, chlorine products or other corrosive chemicals

– Liquids containing solvents (i.e., paint thinners, gasoline, oils.)

– Tri-sodium phosphate products

These chemicals will harm the unit and will damage the surface being cleaned.

Use of these items will void the warranty.

TAKING A BREAK ...fi ve minutes or more

Move the engine stop switch to the OFF position.

For engine details see engine manual.

Release trigger and engage safety lock.

SHUTTING DOWN & CLEAN-UP

If detergents have been used, remove detergent suction tube from container and insert into 1 gallon of fresh water.

Siphon water at low pressure for one minute to clear the line of residual detergent.

Release trigger and engage gun safety lock.

Move the engine stop switch to the OFF position. Close the fuel valve.

Disconnect the garden hose from the water inlet on the unit.

Turn off the water source.

Press trigger to release water pressure.

Disconnect the high pressure hose from the high pressure outlet. Store the high pressure hose in the nozzle holder assembly.

10 English

WINTERIZING AND LONG-TERM STORAGE

Disconnect all water connections.

Turn on the machine for a few seconds, until the water which had remained in the pump exits, turn off immediately.

3: Do not allow high pressure hose to become kinked.

4: Store the machine and accessories in a room which does not reach freezing temperatures. DO NOT store near furnace or other sources of heat as it may dry the pump seals.

CAUTION

Failure to follow the above directions will result in damage to the pump assembly and accessories and will void the warranty.

It is highly recommended to use Kärcher's

Pump Guard (part number 9.558-998.0) before winter storage and during the cleaning season to protect the pump from freezing and premature wear.

Initial Use

MAINTENANCE INSTRUCTIONS

Kärcher pump

Pump Maintenance

All Kärcher pumps ship with oil already inside direct from the factory. There is no need to add oil.

The pump on your Kärcher pressure washer does not require maintenance. Any attempts to service or alter the pump may damage your pressure washer and void your product warranty.

Pump Inspection

Engine

You should routinely make a visual inspection of the pressure washer’s pump. If you notice oil leaking around the pump seals, you should take the pressure washer to a Kärcher-Authorized Service

Center for repair. (You can locate a service center in your area online at: www.karcher-service.com).

Carry out maintenance tasks for the engine according to the specifi cations provided in the operating instructions provided by engine manufacturer.

CLEANING TIPS

Deck Cleaning

(with or without detergent). Pre-rinse deck and surrounding area with fresh water. If using Kärcher

Deck Wash, apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow Deck

Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a long sweeping motion keeping the spray nozzle approximately 3-6 inches from the cleaning surface. Always clean from top to bottom and from left to right. When moving on to a new section of the cleaning surface, be sure to overlap the previous section to eliminate stop marks and ensure a more even cleaning result.

House Siding

(with or without detergent). Pre-rinse cleaning surface with fresh water. If using Kärcher Pressure Wash, apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 feet and always apply detergent from bottom to top). Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface, if surface appears to be drying, simply wet down surface with fresh water. If needed, use special wash brush attachment (not included) to remove stubborn dirt. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 6 inches from the cleaning surface.

English 11

Cement Patios, Brick and Stone

(with or without detergent). Pre-rinse cleaning surface with fresh water. If using Kärcher Pressure Wash or Degreaser, apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet.

Allow Pressure Wash or Degreaser to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 3-

6 inches from the cleaning surface. Always clean from top to bottom and from left to right. For removing extremely stubborn stains, use a DirtBlaster®

Spray Nozzle (sold separately).

Cars, Boats & Motorcycles

(with or without detergent). Pre-rinse vehicle with fresh water. If using Kärcher Touchless Vehicle

Wash, apply to surface at low pressure. For best results, clean one side of vehicle at a time and always apply detergent from bottom to top, do not allow detergent to dry on surface. If needed, use special wash brush attachment (not included) to remove stubborn dirt. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 6-8 inches from the cleaning surface

(distance should increase when rinsing pin-striping or other sensitive surfaces). Always clean from top to bottom and from left to right. For best results, wipe surface dry with a chamois or soft dry cloth.

Barbecue Grills, Outdoor Power

Equipment & Gardening Tools

(with or without detergent). Pre-rinse cleaning surface with fresh water. If using Kärcher Pressure Wash or Degreaser, apply detergent at low pressure. Allow Pressure Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure keeping the spray nozzle approximately 3-6 inches from the cleaning surface. For removing extremely stubborn dirt, it may be necessary to move the spray nozzle even closer to the surface for greater dirt cutting action.

Patio & Lawn Furniture

(with or without detergent). Pre-rinse furniture and surrounding area with fresh water. If using

Pressure Wash, apply to surface at low pressure.

Allow Pressure Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface.

If needed use special Wash Brush Attachment (not included) to remove stubborn dirt. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 3-6 inches from the cleaning surface. For best results, clean from top to bottom and from left to right.

Recommendations

■ Before cleaning any surface an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.

■ If painted surfaces are peeling or chipping,

use extreme caution as pressure washer may remove the loose paint from the surface.

■ When using on surfaces which might come in contact with food, fl ush surfaces with plenty of drinking water.

■ For additional cleaning tips, visit our website at www.karcherresidential.com

Optional Accessories

Optional accessories are available to further enhance your cleaning capabilities. These accessories are accurate as of the printing date of this manual. Please check our website:

www.karcherresidential.com for pricing and upto-date information.

– Extension Hose

– DirtBlaster® Spray Nozzle

– Universal Wash Brush Kit

– T350 Deck and Driveway Cleaner

12 English

TROUBLESHOOTING

CAUTION

Remove the spark plug cable to prevent accidental ignition of the engine before making any repair

Symptom Cause

ENGINE WILL NOT

START

No gasoline

Choke is not in the correct position

UNIT DOES NOT

REACH HIGH

PRESSURE

Solution

Fill gas tank

Slide choke lever out to closed position

Water pressure built up in the machine

Squeeze the trigger to release the pressure

For additional engine problems refer to the engine manual.

Replace with a 5/8 inch or larger garden hose Diameter of garden hose is too small

Water supply is restricted Check garden hose for kinks, leaks and blockage

Not enough inlet water supply

Turn water on full force. Check garden hose for kinks, leaks or blockage.

Water inlet fi lter is clogged Remove fi lter and rinse out in warm water

OUTPUT PRES-

SURE

VARIES HIGH AND

LOW

Black detergent nozzle is attached

Not enough inlet water supply.

Pump is sucking air

Remove black detergent nozzle and attach high pressure nozzle

Turn water on full force. Check garden hose for kinks, leaks or blockage

Check that hoses and fi ttings are air tight.

Turn off machine and purge pump by squeezing trigger gun until a steady fl ow of water emerges through the nozzle

Water inlet fi lter is clogged Remove fi lter and rinse out in warm water

Spray nozzle is obstructed Blow out or remove debris with a fi ne needle

Calcifi ed gun, hose or spray wand

Run distilled vinegar through detergent suction tube.

English 13

Symptom

NO DETERGENT

GARDEN HOSE

CONNECTION

LEAKS

SPRAY WAND

LEAKS

PUMP IS NOISY

WATER LEAKS

FROM PUMP (UP

TO 10 DROP PER

MINUTE IS PER-

MISSIBLE)

Loose fi ttings

Water seals are damaged or worn.

Thermal protection device is activated.

OIL DRIP

Cause

Detergent suction tube not properly connected to the machine

Detergent is too thick

Solution

Check connection

Filter on detergent suction tube is clogged

Damaged or clogged detergent suction tube

A high pressure nozzle is attached

Dilute detergent, for best results use Kärcher detergent

Run warm water through fi lter to remove debris

Remove obstruction or replace detergent suction tube

Replace with black detergent nozzle

Spray nozzle is obstructed Blow out or remove debris with fi ne needle

Loose fi ttings Tighten fi ttings

Missing/worn rubber washer

Spray wand not properly attached

Broken o-ring or plastic insert

Not enough gas or engine oil

Insert new washer

Turn the swivel nut of the gun clockwise until connection is tight

Visit www.karcher-help.com or locate a service center at www.karcher-service.com

Check that hoses and fi ttings are air tight.

Turn off machine and purge pump by squeezing trigger gun until a steady fl ow of water emerges through the nozzle

Check quick connect fi ttings

Oil seals are damaged or worn

Visit www.karcher-help.com or locate a service center at www.karcher-service.com

Thermal protection device will auto reset.

Do not run pump for more than 5 minutes without spraying

Visit www.karcher-help.com or locate a service center at www.karcher-service.com

If the symptom you are experiencing is not listed above, or if the provided solutions do not solve your issue, please visit our extensive online troubleshooting database at: www.karcher-help.com

14 English

High Pressure Washers

Limited 24 month warranty

Cold water gasoline pressure washers (Kärcher Performance Plus Series)

®

This Kärcher product is warranted by Kärcher to be free of defects in workmanship and materials under normal use.

Specifi c warranty applies to:

• Pumps and engines are warranted for two (2) years on parts and labor. For Honda engines, please see the enclosed Honda warranty information.

• Frames, handles and detergent tanks, as well as other structural components, carry a one (1) year parts and labor warranty.

• Standard accessories and attachments are warranted for a ninety (90) day period.

• Any commercial, industrial or rental use of this equipment will reduce the warranty to ninety (90) days.

The warranty period is calculated from the date of purchase by the end user and covers cost for replacement parts / equipment and warranty labor performed. In order to verify a warranty situation, the machine must be evaluated by an Authorized Kärcher Service Center. A copy of the original purchase receipt or gift receipt from the original retailer must also accompany the warranty claim. To locate the nearest authorized

Kärcher service center, please visit our website at www.karcher-service.com.

Kärcher’s obligation under this warranty shall strictly be limited, at Kärcher’s option, either to replace or repair, through Kärcher direct or through an Authorized Kärcher Service Dealer without charge during the warranty period any part, which in the opinion of the manufacturer, shows defect in workmanship or material. Service will be scheduled according to the normal work fl ow and business hours at the service center, and availability of replacement parts. All decisions of Kärcher with regard to this limited warranty shall be fi nal.

This warranty does not cover:

• Merchandise sold as reconditioned, used, demonstration or fl oor models.

• Merchandise purchased on eBay and other online auction web sites.

• Damage caused by misuse, neglect, accident, abuse, improper handling, freezing, normal wear and tear or non-compliance with operator’s manual.

• Damage caused by water sediment, contaminated water supply or use of chemicals and detergents not approved by or recommended by Kärcher.

• Damage caused by acts of nature such as fl oods, fi res, earthquakes, lightning strikes, etc.

• Devices or accessories not distributed or approved by Kärcher. Any use of such said devices or accessories will void implied warranty.

• Repairs made by the end user or any service center not authorized by Kärcher. Any such tampering with Kärcher equipment or accessories will void the implied warranty.

• Any cost for shipping by the customer or authorized service center of the alleged defective part

This warranty applies only to parts and equipment manufactured by Kärcher. Equipment provided, but not manufactured by Kärcher (such as gasoline engines) are subject to warranties and service through said manufacturers’ service centers according to the terms and conditions provided by the respective original equipment manufacturer. Kärcher is not authorized and has no responsibility to provide warranty service for such equipment.

This warranty is non-transferable and applies only to products purchased through a Kärcher authorized reseller in the United States and Canada. This warranty gives you specifi c legal rights. You may have other rights, which vary by country and state/province.

Please register online at www.karcher-register.com. Online registration is quick, free and provides you with a confi rmation email for your records.

If you do not have internet access, please return the warranty registration card included in the accessory bag. It is not necessary to use an envelope. Please remember to use a fi rst-class postage stamp. The

Postal service will not deliver without a stamp.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement