MSD 2900, 2910, 2920 Atomic EFI Installation instructions

Below you will find brief information for Atomic EFI 2900, Atomic EFI 2910. Atomic EFI 2900 is a master kit designed to replace 4-barrel carburetors for smoother, more reliable street driving. Atomic EFI 2910 is a throttle body kit. Atomic EFI 2920 is a fuel pump kit. This document provides comprehensive installation instructions for these kits. The Atomic EFI is a self-tuning fuel system that continuously adjusts after the basic configuration is complete and includes features such as idle RPM, rev limit and timing control.

PDF Download
Document
Atomic EFI 2900, 2910 Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Self-tuning fuel system
  • Replaces 4-barrel carburetors
  • Smoother, more reliable street driving
  • Idle RPM and rev limit control
  • Timing control
  • Handheld monitor
  • Wide band oxygen sensor
  • Engine coolant temperature sensor

Frequently asked questions

The Atomic EFI is a self-tuning fuel system designed to replace 4-barrel carburetors, aiming for smoother and more reliable street driving. It offers features like idle RPM and rev limit control, as well as optional timing control for enhanced engine performance.

The Atomic EFI Master Kit (PN 2900) includes a throttle body with ECU, TB harness, power module, PM harness, handheld monitor, coolant temperature sensor, parts bag, and a fuel pump kit.

The WBO2 is crucial for the Atomic EFI's operation. It provides real-time feedback on the air/fuel ratio, allowing the system to adjust fuel delivery for optimal engine performance.

The Atomic EFI continuously monitors engine parameters and adjusts fuel maps based on your initial configuration and real-time conditions, ensuring proper fuel mixture for different driving scenarios and environmental factors.
ALP:
Preparing document for printing…
0%