Polk Audio Speakers System Catalog

Polk Audio Speakers System Catalog
MOBILE MONITOR SERIES
DESIGNED TO PERFORM
COAXIALS • SYSTEMS • SUBWOOFERS
Mobile Monitor Series.
The new fit and performance standard is here.
If four wheels are your favorite kind of concert hall,
then Polk Audio’s new high-performance Mobile Monitor
Series is your ticket to the best seat in the house. Using
the most advanced designs and materials available,
as well as the same technology found in Polk’s awardwinning Signature Reference Series, Polk Audio’s
MM Series offers you unmatched performance
at a price you have to hear to believe.
Real performance is in the countless
details we obsess over.
Our Research & Development department optimized every
performance parameter so every MM speaker would work
with the latest thinking in automobile design. All models
in the MM Series use newly developed carbon composite
basket structures for lighter weight, shallower mounting
depth and superior rigidity. Unlike stamped steel designs
found at the same price, Polk’s MM Series carbon
composite baskets are significantly more rigid and
robust, which results in lower distortion and countless
years of reliability. And the MM Series’ extra-shallow
mounting depth means they’ll fit into virtually
any installation and take up less space with
half the weight of most other speakers.
The legendary Polk® sound comes with
years of legendary Polk reliability.
Butyl nitrate rubber surrounds provide superb
reliability in any mobile environment for years
of great Polk sound. All models also feature
oversized voice coils and polyamide/fiberglass
formers for superior power handling and lower
distortion. All full range models (except the MM461P)
employ incredibly strong and efficient neodymium
magnets instead of the bulky conventional ceramic
ferrite structures normally used. This technology
was first used in the Polk Audio Signature
Reference Series and results in much lower
weight and size, resulting in greatly improved
fit and ease of installation.
The new Mobile Monitor Series high-performance
speakers truly offer the best of both worlds in value
and performance and are waiting for a test drive
at your local Polk Audio dealer.
The MM’s extra-shallow mounting
depth means every speaker will fit
into virtually any installation and take
up less space with half the weight
of most other speakers.
Unlike stamped steel designs found at the same price, Polk’s MM Series
carbon composite baskets are dramatically more rigid and robust, which
results in lower distortion and countless years of reliability.
All Mobile Monitor Speakers have
these proven high performance features:
High efficiency design means less amplifier power is needed
for more audio output. While a separate amp is recommended
on full range models for the ultimate in performance,
MM Loudspeakers will sound wonderful when driven by
aftermarket head units or factory installed electronics.
Dynamic Balance® driver technology—All MM Series
drivers, tweeters and subwoofers incorporate Dynamic
Balance technology, which is a state-of-the-art proprietary
Polk technology developed in conjunction with the Johns
Hopkins University. The goal was to perfect the method
of analyzing a speaker’s microscopic behavior using laser
Interferometry in order to optimize the system’s performance.
Polk engineers were able to view the entire vibrating surface
of a driver or tweeter and see the
resonance which develops on speaker
cones as they move. Resonance is
the root cause of frequency response
A
distortions (A). Dynamic Balance enables
us to tune out unwanted resonance and
distortion with the perfect combination
of materials, geometry and construction
B
techniques (B). The result is pure,
distortion free sound.
Klippel Optimization—In order for a driver to reproduce
complex sounds accurately, the cone must move in exactly
the same distance and manner in both directions of travel.
The Klippel distortion analyzer—a device that uses
a laser and sophisticated software to do large-scale
analysis of drivers in motion, enables us to optimize
the motor structure, voice coil alignment and
suspension to yield the best possible performance.
MM651
“Hats off to the engineers at Polk—
the MM1240 is definitely a winner…”
—Dave MacKinnon, Performance Auto & Sound,
August 2008
MM Series Full Range Speakers.
All the performance without the weight.
MM Series full range speakers include configurations from
oval models, coaxial speakers and component systems
covering a wide variety of applications. Every component
has been meticulously optimized to bring you the best
sound quality. Compact in-line crossovers are easy to
hide and use precision components such as air core
inductors. The speaker’s 1" silk dome tweeters provide
optimal dispersion, while glass composite cones provide
superior midrange and bass punch. The speakers use
advanced materials such as neodymium magnets,
glass composite cones and carbon composite baskets.
The benefits are a lighter and slimmer speaker that
fits more applications. And less weight in your sound
system also means higher performance for your vehicle.
Woven glass composite cones feature tremendous
stiffness-to-mass ratio. Lower cone mass brings you
faster transient response and finer detail.
Large diameter voice coils (30mm) and polyamide/
fiberglass former increase reliability and power
handling so you can crank up your tunes.
Swivel tweeters on coax models allow you to precisely
direct the highs. Flush and surface mount tweeter cups
are included with component systems.
Neodymium magnets are a rare material found on both
the tweeter and driver*. It replaces the traditional bulky
ceramic magnet with a much more powerful unit at half
the weight. *except MM461P
In-line crossovers use high quality components such
as air core inductors for superior signal transfer.
The crossover is easily hidden for simple installation.
Component models feature tweeter level adjustment.
Rugged high quality grilles are included with round
models and MM691.
MM691
MM Series High Performance Subwoofers.
Don’t be fooled by their light weight
and easy installation. They pound.
MM Series subwoofers are the latest and greatest.
We’ve reduced the mounting depth to near 4 1⁄2" and
raised the performance in a very small box.
Polymer woofer cones and butyl rubber surrounds
will survive the rigors of harsh automotive environments
and not break down over time.
Catenary shaped cone provides rigidity and strength.
At each point in a catenary structure, opposing tension
and compression forces are balanced. A catenary shape
maximizes the stiffness of the cone without resorting
to using more material that would add mass. The woofer
cone won’t flex giving you tight, accurate bass.
Available in single and dual voice coil configurations
allowing flexible wiring options in all sizes.
Heavy duty input terminals accommodate speaker
wire up to 8 AWG or twisted pairs of 12 AWG.
Super shallow mounting depth thanks to advanced
carbon composite basket materials. All models require
a top mounting depth around 4 1⁄2" (see spec sheet
for actual mounting depths).
Available matching grilles add style and protection
to your subwoofer.
High temperature copper voice coil (50mm)
and polyamide former withstands high powered
use while maintaining extremely low distortion
for bass punch and output.
MM1040
MM461P
MM521
MM571
MM651
Full Range
MM461P
4" x 6" Plate
Power Handling: 150W Peak
Power Handling: 50W RMS
Frequency Response: 70Hz - 25kHz
Sensitivity: 90dB
Impedance: 4 Ohms
Driver Complement: 3 1/2" (87.5mm) mid/woofer
Tweeter Complement: 3/4" (19mm) soft dome tweeter
Cutout Dimensions: 3 7/8" x 5 15/16" (115.6mm x 179.7mm)
Mounting Depth (top): 1 11/16" (43mm)
Mounting Depth (bottom): n/a
MM521
5 1/4" Coaxial
Power Handling: 200W Peak
Power Handling: 90W RMS
Frequency Response: 50Hz - 25kHz
Sensitivity: 92dB
Impedance: 2.7 Ohms
Driver Complement: 5 1/4" (131.03mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 4 5/8" (117mm)
Mounting Depth (top): 2 3/8" (60mm)
Mounting Depth (bottom): 2 13/16" (71mm)
MM571
5" x 7" Coaxial
Power Handling: 200W Peak
Power Handling: 90W RMS
Frequency Response: 38Hz - 25kHz
Sensitivity: 92dB
Impedance: 2.7 Ohms
Driver Complement: 5" x 7" (125mm x 175mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 4 5/8" x 7 3/16" (117.5mm x 182.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 3" (76mm)
MM651
6 1/2" Coaxial
Power Handling: 200W Peak
Power Handling: 100W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 94dB
Impedance: 2.7 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16" (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM691
6" x 9" 3-Way
Power Handling: 300W Peak
Power Handling: 125W RMS
Frequency Response: 30Hz - 25kHz
Sensitivity: 94dB
Impedance: 2.7 Ohms
Driver Complement: 6" x 9" (150mm x 225mm) mid/woofer
Tweeter Complement: (1) 3/4" (19mm) & (1) 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/2" x 8 3/8" (140mm x 213mm)
Mounting Depth (top): 3 3/16" (81mm)
Mounting Depth (bottom): 3 1/2" (89mm)
MM5251
5 1/4" Component
System
Power Handling: 200W Peak
Power Handling: 90W RMS
Frequency Response: 50Hz - 25kHz
Sensitivity: 92dB
Impedance: 2.7 Ohms
Driver Complement: 5 1/4" (131.03mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 4 5/8" (117.5mm)
Mounting Depth (top): 2 3/8" (60mm)
Mounting Depth (bottom): 2 13/16" (71mm)
MM6501
6 1/2" Component
System
Power Handling: 250W Peak
Power Handling: 125W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 94dB
Impedance: 2.7 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16" (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM691
MM5251
MM6501
MM840 & MM840DVC
MM1040 & MM1040DVC
MM1240 & MM1240DVC
MM1540 & MM1540DVC
Subwoofer
MM840
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 1/8" (105mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 2.3mH
Qms: 5.5
Qes: 0.7
Qts: 0.6
Vas: 0.54ft3 (15.4L)
Sd: 35.65in2 (230cm2)
MM840DVC
Dual 4 Ω Voice Coil
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 1/8" (105mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 2.47mH
Qms: 5.5
Qes: 0.62
Qts: 0.59
Vas: 0.55ft3 (15.8L)
Sd: 35.65in2 (230cm2)
MM1040
10" Subwoofer
Power Handling: 700W Peak
Power Handling: 350W RMS
Frequency Response: 24Hz - 200Hz
Sensitivity: 91dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 1/2" (114mm)
Mounting Depth (bottom mount): 5 1/8" (130mm)
Cutout Diameter: 9 1/16" (230mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 3.0
Qes: 0.53
Qts: 0.45
Vas: 0.65ft3 (18L)
Sd: 54.25in2 (350cm2)
MM1040DVC
Dual 4 Ω Voice Coil
10" Subwoofer
Power Handling: 700W Peak
Power Handling: 350W RMS
Frequency Response: 24Hz - 200Hz
Sensitivity: 91dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 1/2" (114mm)
Mounting Depth (bottom mount): 5 1/8" (130mm)
Cutout Diameter: 9 1/16" (230mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 5.1mH
Qms: 3.0
Qes: 0.59
Qts: 0.5
Vas: 0.65ft3 (18L)
Sd: 54.25in2 (350cm2)
MM1240
12" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 22Hz - 200Hz
Sensitivity: 92dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 11" (279mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 5.5
Qes: 0.63
Qts: 0.53
Vas: 1.3ft3 (38L)
Sd: 80.6in2 (520cm2)
MM1240DVC
Dual 4 Ω Voice Coil
12" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 22Hz - 200Hz
Sensitivity: 92dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 11" (279mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 5.1mH
Qms: 5.0
Qes: 0.70
Qts: 0.6
Vas: 1.3ft3 (38L)
Sd: 80.6in2 (520cm2)
MM1540
15" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 18Hz - 150Hz
Sensitivity: 93dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 13 7/8" (352mm)
Fs (Hz): 27Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 5.0
Qes: 0.56
Qts: 0.5
Vas: 3.5.ft3 (100L)
Sd: 128.5in2 (829cm2)
MM1540DVC
Dual 4 Ω Voice Coil
15" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 18Hz - 150Hz
Sensitivity: 93dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 13 7/8" (352mm)
Fs (Hz): 27Hz
Re: 6.25 Ohms
Le: 5.1mH
Qms: 5.0
Qes: 0.56
Qts: 0.5
Vas: 3.5.ft3 (100L)
Sd: 128.5in2 (829cm2)
Ultra Performance.
Ultra Reliability. Ultra Marine.
Although any of the MM Series may be used in a marine
environment, we’ve made five premium models specifically
for use on boats and other watercraft. With a 6 1/2" coaxial,
a 6 1/2" component, two 8" subwoofers and a 10" subwoofer
available, you can put together a complete on-the-water
system. We’ve thoroughly tested them in the lab and out
on the open sea to make sure they’ll sound great while
surviving life on water. In fact, they’re so good, top
watercraft manufacturers like Correct Craft and Sea
Ray install Polk Ultra Marine Series from their factories.
Rugged, built-on grilles provide protection and integrates
the tweeter mount—eliminating the need for a traditional
tweeter post. The front of the speaker is then completely
sealed preventing water intrusion.
Sealed crossover assembly is built into the back
of the speaker means there’s no need to find room
to hide an extra box making installation easier.
Passes the most rigorous 600 hours of salt fog
and UV testing—ATSM B117-03 standard practice
for operating salt spray (fog) apparatus, and D4329-99
standard practice for fluorescent UV exposure of plastics—
a stringent standardized test of reliability and longevity.
In other words, they’re built like a tank.
Marine Certified means specific MM models are suitable
for use on watercraft and land vehicles. These models come
with the Ultra Marine (UM) model designator. MM Ultra Marine
speakers were subjected to a series of grueling real world and
accelerated weathering lab tests to see if they could stand up
to harsh marine and automotive environments. We exposed
them to hundreds of hours of salt fog, intense ultraviolet light
and extreme temperatures from -40° to 185° F (-40° to 85° C),
then gave them a listen. All MM Ultra Marine speakers and
subwoofers passed the torture tests with flying colors.
Stainless steel heavy duty input terminals will not
corrode or tarnish from humidity or salt water. They’ll
accept heavy gauge cable for maximum signal transfer.
MM651UM
MM651UM
MM6501UM
MM840UM & MM840UM-DVC
MM1040UM
Ultra Marine
MM651UM
Ultra Marine
6 1/2" Coaxial
Power Handling: 200W Peak
Power Handling: 100W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 92dB
Impedance: 4 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16 " (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM6501UM
Ultra Marine
6 1/2" Component
System
Power Handling: 250W Peak
Power Handling: 125W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 92dB
Impedance: 4 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16 " (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM840UM
Ultra Marine
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 2.3mH
Qms: 5.5
Qes: 0.7
Qts: 0.6
Vas: 0.54ft3 (15.4L)
Sd: 35.65in2 (230cm2)
MM840UM-DVC Ultra Marine
Dual 4 Ω Voice Coil
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 2.47mH
Qms: 5.5
Qes: 0.62
Qts: 0.59
Vas: 0.55ft3 (15.8L)
Sd: 35.65in2 (230cm2)
MM1040UM
Power Handling: 700W Peak
Power Handling: 350W RMS
Frequency Response: 24Hz - 200Hz
Sensitivity: 91dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 3/16" (132mm)
Cutout Diameter: 9 1/8" (231.8mm)
Fs (Hz): 40Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 3.0
Qes: 0.53
Qts: 0.45
Vas: 0.65ft3 (18L)
Sd: 54.25in2 (350cm2)
POLK AUDIO SPEAKERS
Ultra Marine
10" Subwoofer
SPEAKER SYSTEM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising