Panasonic BBGT1540 User manual

Add to my manuals
10 Pages

advertisement

Panasonic BBGT1540 User manual | Manualzz

BB-GT1540_QG(e).fm Page 1 Monday, May 14, 2007 11:22 AM

Model No.

BB-GT1500

BB-GT1540

Quick Guide

Setting up

Base unit

Use only the included Panasonic AC adaptor PQLV203.

TEL LAN

Press plug firmly.

(120 V AC, 60 Hz)

Hook

AC adaptor

C

Router

A

Ethernet cable

B

Telephone line cord

Noise filter

To single-line telephone jack

(RJ11C)

Internet

Cable or

DSL modem

Handset CHARGE 7 HOURS

A

B

C

E

D Confirm the charge indicator is on.

Model shown is BB-GT1500.

For product assistance, visit www.panasonic.com/help

For A assistance, visit www.joip.com

PQQW15674ZA

DM0507SN0

BB-GT1540_QG(e).fm Page 2 Monday, May 14, 2007 11:22 AM

Setting up

joip

1

To use the

A IP line, read the Terms of Use for the A services on the included leaflet or at www.joip.com

2

Press {YES}.

3

Wait until the STATUS indicator turns green.

4

Confirm your

A number.

Amber Green

Please read joip

Terms of Use.

Agree?

Y E S joip:#1001060429

Model shown is BB-GT1500.

5

Wait for a

A text message for the A website password (www.joip.com).

To view the message, see below.

Note:

L

When the STATUS indicator on the base unit does not light in green even if you

wait for a few minutes, see “STATUS indicator” (page 6).

Viewing the A text messages

1

{

MENU} i {#}{3}{6}{0}

2

{V}

/{^}: Select the desired item. i {OK}

3

{

OFF}

For product assistance, visit www.panasonic.com/help

For A assistance, visit www.joip.com

– 2 –

BB-GT1540_QG(e).fm Page 3 Monday, May 14, 2007 11:22 AM

Operating tips

{ }

: shows button names.

Using the joystick

The handset joystick can be used to navigate through menus and to select items shown on the display, by pushing it up {^}, down {V}, left {<}, or right {>}.

Adjusting audio volume

Push the joystick up {^} or down {V} repeatedly while talking.

Handset soft keys

The handset features 2 soft keys and a joystick. By pressing a soft key, or by pressing the center of the joystick, you can select the feature shown directly above it on the display.

{

SELECT}, {SAVE}, {OK}, and additional other functions are assigned to soft keys. Pay attention to soft keys to find functions you need during handset operation.

Middle soft key

The joystick can be used to select the center soft key icon, by pressing down on the center of the joystick.

Date and time (Handset)

1

{

MENU} i {#}{1}{0}{1}

2

Enter the current month, date, and year by selecting 2 digits for each.

3

Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each.

4

{

AM/PM}: Select “AM” or “PM”. i {SAVE} i {OFF}

For product assistance, visit www.panasonic.com/help

For A assistance, visit www.joip.com

– 3 –

BB-GT1540_QG(e).fm Page 4 Monday, May 14, 2007 11:22 AM

Basic operation (Handset)

Making calls

1

Dial the phone number.

2

To make a landline call, press {TEL}.

To make a A internet call, press {IP}.

Answering calls

Note:

L

To call a Panasonic GLOBARANGE phone, dial the

A number consisting of a # followed by 10 digits.

To answer the landline call, press {TALK}, {TEL} or

{s}

.

To answer the A internet call, press {TALK}, {IP} or {s}.

Push the joystick up {^} or down {V} while talking.

Adjusting the receiver/ speaker volume

Viewing the caller list and calling back

Ringer volume

{

CID} i {V}/{^}: Select the desired item. i

{

TEL}/{IP}

1

{

MENU} i {#}{1}{6}{0}{1} (IP line)/

{#}{

1}{6}{0}{2} (landline)

2

{^}

/{V}: Select the desired volume. i {SAVE}

BB-GT1540 Basic operation (Base unit)

Making calls

1

To make a landline call, press {TEL}.

To make a A internet call, press {IP}.

2

Dial the phone number, and then speak into the

MIC.

Answering calls

Note:

L

To call a Panasonic GLOBARANGE phone, dial the

A number consisting of a # followed by 10 digits.

To answer the landline call, press {TEL} or {s}.

To answer the A internet call, press {IP} or {s}.

Press {^} or {V} repeatedly while talking.

Adjusting the speaker volume

Ringer volume

1

Press {IP/TEL} repeatedly until the display shows the desired line (n or m).

2

Press {^} or {V} repeatedly to select the desired volume.

L

To turn the ringer off, press and hold {V} until the unit beeps.

For product assistance, visit www.panasonic.com/help

For A assistance, visit www.joip.com

– 4 –

BB-GT1540_QG(e).fm Page 5 Monday, May 14, 2007 11:22 AM

BB-GT1540 Answering system (Base unit)

Auto answer on

1

Press {IP/TEL} repeatedly until the display shows the desired line(s) (n and/or m).

2

Press {ANSWER ON}.

Auto answer off

Recording your greeting message (max. 2 minutes)

Listening to new messages

Press {ANSWER ON}.

1

Press {IP/TEL} repeatedly until the display shows the desired line(s) (n and/or m).

2

{

GREETING REC}

3

Within 10 seconds, press {GREETING REC} again.

4

Speak clearly about 20 cm (8 inches) away from the MIC.

5

To stop recording, press {STOP}.

When {6} flashes on the center of navigator key, press {6}.

Erasing a message

Using the answering system remotely

Press {ERASE} during playback.

1

Dial your phone number from a touch tone phone.

2

After the greeting message starts, enter your remote code. (Default remote code is “111”.)

L

The unit plays back new messages.

L

After playing back new messages, the voice guidance starts.

3

Follow the voice guidance as necessary.

Quick troubleshooting

STATUS indicator

Status

Color

Green

Red

Cause/solution

Light pattern

On

Flashing

On

L

Ready to make/receive A internet calls.

L

Downloading data, please wait.

L

On for about 3 seconds during initial startup.

(Normal)

Flashing

L

The base unit is registering a handset. Please wait.

Flashing rapidly

L

The base unit is paging handsets. (BB-GT1500)

– 5 –

BB-GT1540_QG(e).fm Page 6 Monday, May 14, 2007 11:22 AM

Quick troubleshooting

STATUS indicator

Status

Cause/solution

Color Light pattern

Amber On

L

The base unit’s IP address may conflict with the IP addresses of other devices on your local network if you have set the static IP address. We recommend using the automatic setup (default):

1. {MENU} i {#}{5}{0}{0}

2. {V}{^}: “On” i {SAVE} i {OFF}

OFF

Flashing

L

The base unit is registering with the A service.

Please wait.

L

If the STATUS indicator continues flashing:

– If you have set the static address, we recommend using the automatic setup (default):

1. {MENU} i {#}{5}{0}{0}

2. {V}{^}: “On” i {SAVE} i {OFF}

– Many installation issues can be resolved by resetting all the equipment. First, shut down your modem, router, base unit, and computer. Then turn the devices back on one at a time in this order: modem, router, base unit, computer.

– If you cannot access Internet Web pages using your computer, check to see if your Internet service provider is having connection issues in your area.

– For more troubleshooting help, visit www.joip.com or contact the A service provider.

L

A internet calls are not available. Check the following:

– The base unit’s AC adaptor is connected.

– Set up for A use (page 2).

– The Ethernet cable is connected.

– Your network devices (hub, router, etc.) are turned on. Check the LEDs for the link status of the devices.

For further information, refer to the STATUS indicator section in the Operating

Instructions.

For product assistance, visit www.panasonic.com/help

For A assistance, visit www.joip.com

– 6 –

BB-GT1540_QG(e).fm Page 7 Monday, May 14, 2007 11:22 AM

Frequently asked questions

Question

The unit does not work.

I cannot hear a dial tone for the IP line.

I cannot hear a dial tone for the landline.

Cause/solution

L

Make sure the battery is installed correctly and fully charged.

L

Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again.

L

The handset has not been registered to the base unit. Register the handset as explained later in this guide.

L

Confirm the Ethernet cable is properly connected.

L

You have not agreed to the Terms of Use for the

A services. To use the A IP line, you need to agree to it using the handset.

L

If you cannot make or receive internet calls or if you are experiencing any other issues with your

VoIP telephone service provided by deltathree,

Inc., visit www.joip.com

L

Confirm the telephone line cord is properly connected.

L

Disconnect the unit from the telephone line and connect a known working telephone. If the working telephone operates properly, contact

Panasonic service personnel to have the unit repaired. If the working telephone does not operate properly, contact your landline service provider.

L

Push the joystick up repeatedly while talking.

How can I increase handset volume level?

The VM indicator on the base unit flashes.

Example: BB-GT1540

L

You have new voice mail messages received by your landline service provider and/or A. For further information, refer to the Voice Mail section in the Operating Instructions.

VM

BB-GT1540: The message indicator on the base unit flashes.

L

You have new messages received from the landline and/or A IP line by the unit’s answering system. For further information, refer to the answering system section in the Operating

Instructions.

For other questions, please refer to the Operating Instructions or visit the web sites below.

For product assistance, visit www.panasonic.com/help

For A assistance, visit www.joip.com

– 7 –

BB-GT1540_QG(e).fm Page 8 Monday, May 14, 2007 11:22 AM

Quick troubleshooting

Handset shows:

“No link to base. Move closer to base, try again.”

Place the handset on the base unit, then check if the charge indicator is on.

L

Model shown is BB-GT1500.

The charge indicator is OFF.

Unplug and then plug AC adaptor properly to both the base unit and AC outlet.

The charge indicator is ON.

Lift the handset, then try again.

If handset still shows the same message, try re-registration as explained later in this guide.

Re-registration failed.

Unplug the AC adaptor of the base unit and remove the battery from the handset, then plug in the AC adaptor and insert the battery into the handset again. Try re-registration as explained later in this guide.

Re-registration failed.

Your telephone may need service.

Please visit http://www.panasonic.com/help for further troubleshooting.

– 8 –

BB-GT1540_QG(e).fm Page 9 Monday, May 14, 2007 11:22 AM

Registering a handset to base unit

The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.

Handset

Press {MENU}, then press {#}{1}{3}{0}.

{

MENU}

Base unit

BB-GT1500

Press and hold {HANDSET LOCATOR} until the STATUS indicator flashes in red.

L

Complete next step within 90 seconds.

BB-GT1540

Press and hold {LOCATOR/INTERCOM} until the registration tone sounds and the

STATUS indicator flashes in red.

L Complete next step within 90 seconds.

{

HANDSET LOCATOR}

{

LOCATOR/INTERCOM}

Handset

Press {OK

L}.

Press LOCATOR on base for 4sec

Then press

OK

{ OKL}

For product assistance, visit www.panasonic.com/help

For A assistance, visit www.joip.com

– 9 –

BB-GT1540_QG(e).fm Page 10 Monday, May 14, 2007 11:22 AM

IMPORTANT!

If your product is not working properly. . .

A customer support

A is the VoIP service provided by deltathree, Inc. for this phone. If you cannot make or receive internet calls or if you are experiencing any other issues with your VoIP telephone services, please contact A customer support:

L

Visit www.joip.com or send an email to

[email protected]

L

Call

*

JOIP (

*

5647) from your GLOBARANGE phone using the IP line.

L

Call 1-877-NOW-JOIP (1-877-669-5647) using the landline.

For your phone’s functions or features, please contact

Panasonic.

1 Read this Quick Guide or Operating Instructions

L

If you lost the Operating Instructions, you can download a copy at http://www.panasonic.com/help

2 Visit our website:

http://www.panasonic.com/help

L

FAQs and troubleshooting hints are available.

3 Contact us via the web at:

http://www.panasonic.com/contactus

4 Call us at:

1-800-211-PANA (1-800-211-7262)

L

Monday - Friday 9:00am - 9:00pm (EST),

Saturday/Sunday 10:00am - 7:00pm (EST)

To order a replacement battery, please call: 1-800-332-5368

Or visit: http://www.panasonic.com/batterystore

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement