Owner`s Manual

Owner`s Manual
Contents
Connections
Playback
Settings
Tips
Appendix
.
.
NETWORK RECEIVER DRA-N4
Owner’s Manual
You can print more than one page of a PDF onto a single sheet of paper.
Front/Top
panel
Rear panel
Remote control unit
1
Index
Contents
Connections
Playback
Accessories
Inserting the batteries
Operating range of the remote control unit
Features
Multiple music formats are supported, all in a compact form factor
Easy operation
Part names and functions
Front/Top panel
Rear panel
Remote control unit
Front/Top
panel
Rear panel
Remote control unit
Settings
Tips
Appendix
Connections
5
6
6
7
7
7
8
8
11
13
Speaker connection
Connecting the speaker cables
Connecting the subwoofer
Connecting speakers
Connecting an analog device
Connecting a digital device
Connecting an iPod or USB memory device to the USB port
Connecting to a home network (LAN)
Wired LAN
Wireless LAN
Connecting the power cord
2
Index
17
17
18
19
20
20
21
23
23
24
26
Contents
Connections
Playback
Settings
Playback
Basic operation
Turning the power on
Selecting the input source
Adjusting the volume
Turning off the sound temporarily
Listening to Internet Radio
Listening to Internet Radio
Playing the last played Internet Radio station
Using vTuner to add Internet Radio stations to favorites
Playing back files stored on a PC and NAS
Applying media sharing settings
Playing back files stored on a PC and NAS
Favorite function
Registering stations or files to the favorites list
Calling stations or files from the favorites list
To switch between registered stations and files during playback
Deleting stations or files from the favorite list
Playing an iPod
Listening to music on an iPod
Setting operation mode (Browse iPod mode)
Charging the iPod/iPhone
Playing a USB memory device
Playing files stored on USB memory devices
Front/Top
panel
Rear panel
Remote control unit
Tips
Appendix
Listening to music on a Bluetooth device
Pairing with a Bluetooth device
Playing a Bluetooth device
Pairing with the Pairing Mode
Connecting a Bluetooth device with the NFC function via NFC
Listening to DIGITAL IN
Listening to ANALOG IN
AirPlay function
Playing songs from your iPhone, iPod touch or iPad
Playing iTunes music with this unit
Selecting multiple speakers (devices)
Spotify Connect function
Playing Spotify music with this unit
Remote play function
Settings required for each device
Web control function
Controlling the unit from a web control
Convenience functions
Adjusting the tone
Sleep timer function
Checking the current time
Switching the display’s brightness
28
28
28
29
29
30
31
32
33
34
35
36
38
39
39
39
39
40
41
42
43
44
45
3
Index
46
47
48
49
50
51
51
52
53
53
54
55
55
56
57
59
59
65
66
67
67
68
Contents
Connections
Playback
Settings
Settings
Appendix
Tips
69
71
72
72
73
74
74
75
75
76
76
76
76
77
79
79
79
80
80
Menu map
Menu operation
Inputting characters
Using the number buttons
Using the cursor buttons
General
Alarm
Clock
Volume Limit
Speaker Optimization
Language
Auto-Standby
Usage Data
Firmware
Network
Network Information
Network Control
Friendly Name
Settings
Front/Top
panel
Tips
Rear panel
Remote control unit
Tips
Troubleshooting
Resetting factory settings
87
89
100
Appendix
Playing back USB memory devices
Playing back Internet Radio
Playing back Bluetooth devices
Bluetooth communications
Playing back files stored on PC or NAS
Last function memory
Explanation of terms
Trademark information
Specifications
Index
License
4
Index
101
103
103
103
104
105
106
112
113
118
120
Contents
Connections
Playback
Tips
Settings
Appendix
Thank you for purchasing this Denon product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
Check that the following parts are supplied with the product.
.
.
.
Quick Setup Guide
CD-ROM
(Owner’s Manual)
.
Safety Instructions
Notes on radio
.
.
Remote control unit
(RC-1198)
Front/Top
panel
R03/AAA batteries
Rear panel
Remote control unit
5
.
Index
Power cord
Contents
Connections
Playback
Settings
Inserting the batteries
Tips
Appendix
NOTE
0 To prevent damage or leakage of battery fluid:
A Remove the rear lid in the direction of the arrow and remove it.
0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Operating range of the remote control
unit
Point the remote control unit at the remote sensor when operating it.
.
B Insert two batteries correctly into the battery compartment as indicated.
R03/AAA batteries
Approx. 7 m
30°
.
.
C Put the rear cover back on.
Front/Top
panel
Rear panel
Remote control unit
6
Index
30°
Contents
Connections
Playback
Settings
Tips
Appendix
Features
Multiple music formats are supported,
all in a compact form factor
Easy operation
0 Easy wireless connection is possible by pressing the Wi-Fi
0 Supports Internet Radio and music streaming Supports
0
0
0
0
0
AirPlay® (v p. 52)
You can enjoy a wide variety of content, including listening to Internet
Radio, playing audio files stored on your PC.
This unit also supports Apple AirPlay which lets you stream your music
library from an iPhone®, iPad®, iPod touch® or iTunes®.
DLNA (Digital Living Network Alliance) ver. 1.5 support for audio
networks
Supports online music, including Spotify
Support for High Quality Audio playback
WAV/FLAC/ALAC (Apple Lossless Audio Codec)/AIFF
Support for Gapless playback
Playback with no gap between music files (for WAV/FLAC/ALAC/AIFF
only)
Wi-Fi network capability with built-in diversity antenna, and is
certified under WMM (Wi-Fi Multi Media) for efficient wireless
connectivity
0
0
0
0
CONNECT button (WPS and Wi-Fi Sharing)
See the separate “Quick Setup Guide”.
Wireless connection with Bluetooth devices can be carried out
easily
You can enjoy music simply by connecting wirelessly with your
smartphone, tablet, PC, etc.
If the Bluetooth device has NFC function, you can connect easily
to touch to N mark
iPod auto detect charges your device even after the unit switches
to standby mode
Denon “Hi-Fi Remote” App is application software that allows you
to perform basic operations with an iPad, iPhone, Android
smartphone or Android tablet such as turning the unit ON/OFF,
controlling the volume, and switching the source.
z Download the appropriate Denon “Hi-Fi Remote” App for your iOS or Android
devices. This unit needs to be connected to your LAN and the iPad, iPhone,
Android smartphone, Android tablet or other device needs to be connected to
the same network by Wi-Fi (wireless LAN).
0 OLED (Organic Light Emitting Diode) display that can display 3
lines
0 Auto Standby mode for energy savings
Front/Top
panel
Rear panel
Remote control unit
7
Index
Contents
Connections
Playback
Tips
Settings
Part names and functions
Front/Top panel
GTop panelH
q
w
rt
y
e
VOLUME
ENTER
GFront panelH
i
u
o
.
Front/Top
panel
Rear panel
Remote control unit
8
Index
Q0
Appendix
Contents
Connections
Playback
Tips
Settings
Appendix
GTop panelH
q
w
rt
y
e
VOLUME
ENTER
.
A Power operation button (X)
Turns power to this unit on and off (standby).
Power indicator
The power indicator changes as shown below according to the status
of the unit.
0 Power on : White
0 Normal standby : Off
0 When “Network Control” is set to “On” : Red (v p. 79)
0 iPod charge standby : Red (v p. 43)
0 Alarm standby : Orange (v p. 74)
0 Display off: White (v p. 68)
C Volume up/down buttons (VOLUME df)
Adjusts the volume.
D Input source select button (q)
Selects the input source.
E Cursor buttons (uio p)
These select items.
F Playback/Pause/ENTER button (1/3/ENTER)
Plays back and pauses tracks, and enters the selected content.
B N mark (Q)
Touch this mark with a Bluetooth device that includes the NFC function
when pairing (registering) with it. (v p. 50)
Front/Top
panel
Rear panel
Remote control unit
9
Index
Contents
Connections
Playback
Settings
GFront panelH
u
i
o
Q0
.
G USB port
Used to connect iPod or USB memory devices. (v p. 21)
H Display
Various information is displayed here.
I Remote control sensor
This receives signals from the remote control unit. (v p. 6)
J Headphones jack (R)
Used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers.
NOTE
0 To prevent hearing loss, do not raise the volume level excessively when using
headphones.
Front/Top
panel
Rear panel
Remote control unit
10
Index
Tips
Appendix
Contents
Connections
Playback
Tips
Settings
Appendix
Rear panel
q
w
R
SPEAKERS
L
e
r
t
ANALOG IN
L
DIGITAL IN
NETWORK
R
OPTICAL
Wi-Fi
CONNECT
SUB WOOFER
OUT
IMPEDANCE : 4~16
y
.
Front/Top
panel
Rear panel
Remote control unit
11
Index
WPS
iOS
u
Contents
Connections
q
w
Playback
e
r
t
ANALOG IN
DIGITAL IN
NETWORK
L
R
SPEAKERS
L
R
Settings
E NETWORK connector
Used to connect this unit to the network. (v p. 23)
F SW OUT connector
Used to connect a subwoofer with a built-in amplifier. (v p. 18)
OPTICAL
SUB WOOFER
OUT
y
.
WPS
G Wi-Fi CONNECT buttons (iOS/WPS)
Used to connect to the wireless LAN.
(See the separate “Quick Setup Guide”.)
iOS
u
A AC inlet (AC IN)
Used to connect the supplied power cord. (v p. 26)
B Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 17, 19)
C ANALOG IN connectors
Used to connect devices equipped with analog audio connectors.
(v p. 20)
Front/Top
panel
Rear panel
Remote control unit
Appendix
D DIGITAL IN connector
Used to connect devices equipped with digital audio connectors.
(v p. 20)
Wi-Fi
CONNECT
IMPEDANCE : 4~16
Tips
12
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Remote control unit
q
w
e
r
t
A Remote control signal transmitter
This transmits signals from the remote control unit. (v p. 6)
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
B CLOCK button
The current time appear on the unit. (v p. 67)
POWER
C SLEEP button
This sets the sleep timer. (v p. 67)
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
CH
D Input source select buttons
These select the input source. (v p. 28)
CH
E System buttons
These perform playback related operations. (v p. 36, 42, 45)
0 Reverse-skip / Forward-skip buttons (8, 9)
0 Play/pause button (1/3)
Channel buttons (CH +, –)
These operate the Favorite function. (v p. 38)
y
ADD
SDB
TONE
FAVORITES
MUTE
VOLUME
CALL
TOP MENU
INFO
F SDB/TONE button
Adjusting the tone. (v p. 66)
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
DEF
MODE
.
Front/Top
panel
Rear panel
Remote control unit
13
Index
Contents
Connections
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
Settings
AUX
Q5
Q6
I ENTER button
This determines the selection. (v p. 71)
J Cursor buttons (uio p)
These select items. (v p. 71)
CH
ADD
SDB
TONE
FAVORITES
MUTE
K SEARCH button
This displays the search menu. (v p. 32, 36, 45)
VOLUME
L Number buttons (0 – 9, +10)
These enter letters or numbers into the unit. (v p. 72)
CALL
i
o
Q0
Q1
Q2
Q3
Q4
TOP MENU
INFO
M RANDOM button
Switches the random playback. (v p. 36, 42, 45)
ENTER
SEARCH
N REPEAT button
Switches to the repeat playback. (v p. 36, 42, 45)
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
O DIMMER button
Adjust the display brightness of this unit. (v p. 68)
DEF
P POWER button (X)
This turns the power on/standby. (v p. 28)
MODE
.
Front/Top
panel
Appendix
H TOP MENU button
To back to the top of the menu. (v p. 71)
iPo
iPod/
USB
CH
Tips
G FAVORITES ADD / CALL buttons
0 To add radio stations or files to the favorite list, press ADD button.
(v p. 39)
0 To call up a radio station or file registered in the favorite list, press
CALL button. (v p. 39)
MUSIC
SERVER
Bluetooth
Blu
u
POWER
Playback
Rear panel
Remote control unit
14
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Q VOLUME buttons (df)
These adjust the volume level. (v p. 29)
R Information button (INFO)
This switches display items such as the elapsed time, album name and
title name in the playback screen. (v p. 32, 36, 42, 45)
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
S MUTE button (:)
This mutes the output audio. (v p. 29)
POWER
MUSIC
SERVER
AUX
T SETUP button
The setting menu is displayed on the display. (v p. 71)
iPo
iPod/
USB
Bluetooth
Blu
CH
U CLEAR button
This cancels the settings. (v p. 39, 73)
CH
ADD
SDB
TONE
FAVORITES
MUTE
VOLUME
V MODE button
This switches the operation mode. (v p. 42)
Q7
CALL
TOP MENU
INFO
Q8
Q9
ENTER
SEARCH
SETUP
W0
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
DEF
MODE
W1
W2
.
Front/Top
panel
Rear panel
Remote control unit
15
Index
Contents
Connections
Playback
Tips
Settings
o Cables used for connections
o Contents
Speaker connection
Provide necessary cables according to the devices you want to connect.
17
Connecting an analog device
20
Connecting a digital device
20
Connecting an iPod or USB memory device to the USB port
21
Connecting to a home network (LAN)
23
Connecting the power cord
26
Speaker cable
.
Subwoofer cable
.
Optical cable
NOTE
.
0 Do not plug in the power cord until all connections have been completed.
0 Do not bundle power cords with connection cables. Doing so can result in noise.
Audio cable
.
LAN cable
.
Front/Top
panel
Appendix
Rear panel
Remote control unit
16
Index
L
L
R
R
Contents
Connections
Playback
Tips
Settings
Appendix
Speaker connection
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
Connecting the speaker cables
Connect the speaker cable with a rubber tube (red) to the + speaker
terminal (red), and the other cable to the - speaker terminal (black).
NOTE
1
0 Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0 Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. “Protection circuit” (v p. 111)
0 Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock.
0 Use speakers with an impedance of 4 – 16 Ω/ohms.
Peel off about 10 mm of sheathing from the tip of the
speaker cable, then twist the core wire tightly.
.
2
Push the speaker terminal and insert the speaker cable
into the cable insertion slot.
.
3
Release your finger from the speaker terminal to fix the
speaker cable.
.
Front/Top
panel
Rear panel
Remote control unit
17
Index
Contents
Connections
Playback
Tips
Settings
NOTE
Appendix
Connecting the subwoofer
Ensure that only the core wire part of the speaker cable is inserted. If the covered
part is inserted, sound may not be output.
Use a subwoofer cable to connect the subwoofer.
ANALOG IN
L
R
.
SPEAKERS
L
R
DIGITAL IN
NETWORK
OPTICAL
Wi-Fi
CONNECT
IMPEDANCE : 4~16
.
Front/Top
panel
Rear panel
Remote control unit
18
Index
SUB WOOFER
OUT
WPS
iOS
SW
Contents
Connections
Playback
Settings
Connecting speakers
ANALOG IN
L
R
SPEAKERS
L
R
DIGITAL IN
NETWORK
OPTICAL
Wi-Fi
CONNECT
SUB WOOFER
OUT
IMPEDANCE : 4~16
w
.
Front/Top
panel
q
R
w
WPS
iOS
q
L
Rear panel
Remote control unit
19
Index
Tips
Appendix
Contents
Connections
Playback
Tips
Settings
Connecting an analog device
Appendix
Connecting a digital device
Analog
device
ANALOG IN
L
R
SPEAKERS
L
R
DIGITAL IN
Digital
device
AUDIO
AUDIO
AUDIO
OUT
R
L
OPTICAL
OUT
R
L
R
L
ANALOG IN
L
NETWORK
R
SPEAKERS
OPTICAL
L
R
DIGITAL IN
OPTICAL
Wi-Fi
CONNECT
Wi-Fi
CONNECT
IMPEDANCE : 4~16
SUB WOOFER
OUT
WPS
iOS
IMPEDANCE : 4~16
.
.
Front/Top
panel
Rear panel
NETWORK
Remote control unit
20
Index
SUB WOOFER
OUT
WPS
iOS
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an iPod or USB memory device to the USB port
0 To connect an iPod/iPhone to this unit, use the USB adapter cable that was supplied with the iPod/iPhone.
0 For operating instructions, see “Playing an iPod” (v p. 40) or “Playing files stored on USB memory devices” (v p. 45).
iPod
USB memory
device
or
.
Denon does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use
that device’s supplied AC adapter.
NOTE
0 USB memory devices will not work via a USB hub.
0 It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices.
Front/Top
panel
Rear panel
Remote control unit
21
Index
Contents
Connections
Playback
Settings
o Supported iPod/iPhone models
• iPod classic
• iPod nano
• iPod touch
• iPhone
.
Front/Top
panel
Rear panel
Remote control unit
22
Index
Tips
Appendix
Contents
Connections
Playback
Tips
Settings
Appendix
Connecting to a home network (LAN)
You can connect this unit to your home network (LAN) to perform various
types of playbacks and operations as follows.
0 Playback of network audio such as Internet Radio and from your music
server(s)
0 Playback of music content from online streaming services
0 Using the Apple AirPlay function
0 Operation on this unit via the network
0 Firmware Update
Wired LAN
PC
NAS
(Network Attached
Storage)
Modem
Internet
To WAN side
To LAN port
LAN port/
Ethernet
connector
To LAN port
Router
ANALOG IN
L
R
SPEAKERS
L
R
DIGITAL IN
LAN port/
Ethernet
connector
NETWORK
OPTICAL
Wi-Fi
CONNECT
IMPEDANCE : 4~16
SUB WOOFER
OUT
WPS
iOS
.
For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
Front/Top
panel
Rear panel
Remote control unit
23
Index
Contents
Connections
Playback
Settings
Wireless LAN
Modem
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
0 Use only a shielded STP or ScTP LAN cable which is easily available at
electronics stores. (CAT-5 or greater recommended)
0 The normal shielded-type LAN cable is recommended. If a flat-type cable or
unshielded-type cable is used, other devices could be affected by noise.
0 When using a WPS (Wi-Fi Protected Setup) compatible router, you can connect
easily to Wi-Fi by pressing the Wi-Fi CONNECT/WPS button on this unit. (See the
separate “Quick Setup Guide”.)
To WAN side
Router with access point
.
Rear panel
Remote control unit
Appendix
0 With this unit, it is possible to use the DHCP and Auto IP functions to make the
network settings automatically.
0 When using this unit with the broadband router’s DHCP function enabled, this unit
automatically performs the IP address setting and other settings. When using this
unit connected to a network with no DHCP function, make the settings for the IP
address, etc., at “Network”. (v p. 79)
0 When using this unit, we recommend you use a router equipped with the following
functions:
Internet
Front/Top
panel
Tips
24
Index
Contents
Connections
Playback
Settings
NOTE
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE-compatible router is required if
you have a contract for a type of line set by PPPoE.
0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet
connector on your computer.
Front/Top
panel
Rear panel
Remote control unit
25
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
R
SPEAKERS
L
IMPEDANCE : 4~16
Power cord
(supplied)
To household power outlet
(AC 230 V, 50/60 Hz)
.
Front/Top
panel
Rear panel
Remote control unit
26
Index
Tips
Appendix
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Playback network audio/service
Basic operation
Listening to Internet Radio
30
28
Playing back files stored on PC or NAS
34
Selecting the input source
28
AirPlay function
52
Adjusting the volume
29
Spotify Connect function
55
Turning off the sound temporarily
29
Turning the power on
Other functions
Playback a device
Favorite function
38
56
Playing an iPod
40
Remote play function
Playing a USB memory device
44
Web control function
59
Listening to music on a Bluetooth device
46
Convenience functions
65
Listening to DIGITAL IN
51
Listening to ANALOG IN
51
Front/Top
panel
Rear panel
Remote control unit
27
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Basic operation
SLEEP
Input source
select buttons
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
Turning the power on
POWER X
1
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
CH
MUTE
POWER
CH
ADD
SDB
TONE
FAVORITES
MUTE
VOLUME
CALL
TOP MENU
Press POWER X to turn on power to the unit.
You can also switch the power to standby by pressing X on the main unit.
Selecting the input source
VOLUME df
1
INFO
Press the input source select button to be played back.
The desired input source can be selected directly.
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
*
RANDOM REP
RANDO
REPEAT
AT
0 Press AUX again to switch between AUX:Digital In/AUX:Analog In.
0 You can also select the input source by pressing SOURCE on the main unit.
DEF
MODE
.
Front/Top
panel
Rear panel
Remote control unit
28
Index
Contents
Connections
Playback
Settings
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The volume level is displayed.
You can also adjust the volume by turning VOLUME df on the main unit.
Turning off the sound temporarily
1
Press MUTE :.
“MUTING” appears on the display.
To cancel mute, either adjust the sound volume or press MUTE : again.
Front/Top
panel
Rear panel
Remote control unit
29
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to Internet Radio
0 Internet Radio refers to radio broadcasts distributed over the Internet.
SLEEP
INTERNET
RADIO
1/3
FAVORITES
ADD/CALL
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
0 The broad cast station types and specifications supported by this unit
for playback are as follows.
MUSIC
SERVER
AUX
0 WMA
iPo
iPod/
USB
Bluetooth
Blu
CH
0 MP3
CH
ADD
SDB
TONE
FAVORITES
MUTE
0 MPEG-4 AAC
VOLUME
CALL
TOP MENU
uio p
ENTER
SEARCH
Internet Radio stations from around the world can be received.
POWER
INFO
INFO
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
DEF
MODE
.
Front/Top
panel
Rear panel
Remote control unit
30
Index
Contents
Connections
Playback
Settings
Listening to Internet Radio
This unit memorizes the last played Internet Radio station. If you press
INTERNET RADIO to switch to the Internet Radio function from another
input source, the last Internet Radio station you listened to is played.
1
(v p. 23)
2
3
Press INTERNET RADIO.
Displays recommended Internet Radio
stations.
radiodenon.com:
Displays Internet Radio stations added to
favorites in vTuner. For instructions on how
to add to favorites in vTuner, see “Using
vTuner to add Internet Radio stations to
favorites” (v p. 33).
Recently Played :
Displays recently played Internet Radio
stations. Up to 20 stations can be stored in
“Recently Played”.
Displays Internet Radio stations searched
Search by Keyword : by keyword. For character input, see
“Inputting characters” (v p. 72).
Use ui to select the you want to play, then press
ENTER.
Country name :
Displays all Internet Radio stations that this
unit can tune in to.
Search Podcasts :
Displays Internet Radio stations in the
podcasts that this unit can tune in to.
Front/Top
panel
4
Displays typical Internet Radio stations.
Search Stations :
Rear panel
Remote control unit
Appendix
Recommended
Stations :
Prepare for playback.
0 Check the network environment, then turn on this unit’s power.
Tips
31
Use ui to select the station, then press ENTER.
Playback starts once buffering reaches “100%”.
Index
Contents
Connections
Operation buttons
1/3
Playback
Settings
FAVORITES CALL Call from the Favorite list
Add to the Favorite list
SEARCH
Character search
0 If the list is not in alphabetical order, you may not
be able to perform a character search.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the file type/ bit rate and radio station
name etc.
1
Press INTERNET RADIO.
The source switches to “Internet Radio” and the last played radio
station plays.
Any characters that cannot be displayed are replaced with “.” (period).
NOTE
The radio station database service may be suspended or be otherwise unavailable
without notice.
Front/Top
panel
Rear panel
Remote control unit
Appendix
Playing the last played Internet Radio
station
Function
Playback/Stop
FAVORITES ADD
Tips
32
Index
Contents
Connections
Playback
Settings
Using vTuner to add Internet Radio
stations to favorites
5
6
7
Check the MAC address of this unit. “Network
Information” (v p. 79)
Select the radio station of your choice from the list, and
then click the Add to Favorites icon.
Enter the name of the favorite group, then click “Go”.
A new favorite group that includes the selected radio station is
created.
0 Internet Radio stations added to favorites in vTuner can be played
from “radiodenon.com” (v p. 31) with this unit.
o Files that can be played back
vTuner.
3
4
Select the search criteria (genre, region, language,
etc.) of your choice.
hear.
0 The MAC address is necessary when you create an account for
2
See “Playing back Internet Radio” (v p. 103).
Use your PC to access the vTuner website (http://
www.radiodenon.com).
Enter the MAC address of this unit, then click “Go”.
Enter your E-mail address and a password of your
choice.
Front/Top
panel
Rear panel
Remote control unit
Appendix
0 You can also enter a keyword to search for a station you want to
There are many Internet Radio stations in the world, and this unit can tune
into these stations. But finding the radio station you want to hear may be
difficult, because there are too many stations. If this is the case, then
please use vTuner, an Internet Radio station search website specifically
designed for this unit. You can use your PC to search Internet Radio
stations and add them as your favorites. This unit can play radio stations
added to vTuner.
1
Tips
33
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back files stored on a PC and NAS
0 This unit can play back music files and playlists (m3u, wpl) stored on a
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
1/3
89
FAVORITES
ADD/CALL
CH
RANDOM
REPEAT
0 The network audio playback function of this unit connects to the server
MUSIC
SERVER
using technologies shown below.
0 Windows Media Player Network Sharing Service
0 This unit can play back the following files.
CH
0 WMA
0 MP3
ADD
SDB
TONE
FAVORITES
MUTE
0 WAV
0 MPEG-4 AAC
VOLUME
CALL
TOP MENU
uio p
ENTER
SEARCH
PC and on Network Attached Storage (NAS) that supports DLNA.
POWER
INFO
0 FLAC
INFO
0 ALAC
0 AIFF
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
*
RANDOM REP
RANDO
REPEAT
AT
DEF
MODE
.
Front/Top
panel
Rear panel
Remote control unit
34
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Applying media sharing settings
Here, we apply the settings to share music files stored on a PC and NAS on the network.
If you are using a Media Server, be sure to apply this setting first.
o When using Windows Media Player 12
(Windows 7 / Windows 8)
1
2
3
Select “More streaming options...” in the “Stream”.
4
Select “Allowed” in the drop-down list for “Media
programs on this PC and remote connections...”.
5
Follow the instructions on the screen to complete the
settings.
o When using Windows Media Player 11
1
2
3
Start up Windows Media Player 12 on the PC.
Select “Allowed” in the drop-down list for “Denon
CEOL piccolo”.
4
5
Start up Windows Media Player 11 on the PC.
Select “Media Sharing” in the “Library”.
Click the “Share my media” check box, select “Denon
CEOL piccolo”, and then click “Allow”.
As you did in step 3, select the icon of the device (other
PCs and mobile devices) you want to use as a media
controller, and then click “Allow”.
Click “OK” to finish.
o Sharing media stored on a NAS device
Change settings on the Network Attached Storage (NAS) device to
allow this unit and other devices (PCs and mobile devices) used as
media controllers to access the NAS. For details, see the owner’s
manual that came with the NAS.
Front/Top
panel
Rear panel
Remote control unit
35
Index
Contents
Connections
Playback
Settings
Playing back files stored on a PC and
NAS
Operation buttons
2
3
4
Appendix
Function
Playback / Pause
1/3
Use this procedure to play music files or playlists.
1
Tips
(Press and hold) Stop
Skip to previous track / Skip to next track
Prepare for playback.
89
A Check the network environment, then turn on this unit’s power.
“Connecting to a home network (LAN)” (v p. 23)
B Prepare the computer (vComputer’s operating instructions).
FAVORITES CALL Call from the Favorite list
(Press and hold)
Fast-reverse / Fast-forward
FAVORITES ADD
Add to the Favorite list
SEARCH
Use ui to select the server including the file to be
played, then press ENTER.
Character search
0 If the list is not in alphabetical order, you may not
be able to perform a character search.
RANDOM
Random playback
Use ui to select the file, then press ENTER.
REPEAT
Repeat playback
0 Switching between Single-track repeat and Alltrack repeat.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the file type/bit rate, artist name, and
album title.
Press MUSIC SERVER.
Playback starts once buffering reaches “100%”.
Front/Top
panel
Rear panel
Remote control unit
36
Index
Contents
Connections
Playback
Settings
o Files that can be played back
See “Playing back files stored on PC or NAS” (v p. 104).
WMA Lossless files can be played when using a server supporting transcoding, such
as Windows Media Player Ver. 11 or later.
NOTE
0 When playing back music files with your PC or NAS connected through wireless
LAN, audio may be interrupted depending on your wireless LAN environment. In
this case, play back music files with your PC or NAS connected through wired
LAN.
0 The order in which the tracks/files are displayed depends on the server
specifications. If the tracks/files are not displayed in alphabetical order due to the
server specifications, searching by the first letter may not work properly.
Front/Top
panel
Rear panel
Remote control unit
37
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Favorite function
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
CH +, –
FAVORITES
ADD/CALL
CH
CH
ADD
SDB
TONE
FAVORITES
MUTE
VOLUME
CALL
TOP MENU
uio
ENTER
This section provides information on the Favorite function.
0 The Favorite function allows you to register your favorite broadcast
stations and files in the Favorite List in advance so that you can call and
listen to the stations or files right away, whenever you want.
0 The contents that you can register and call are Internet radio station,
music server, USB and iPod (only when using Browse iPod mode).
0 The contents that you can register and call are Internet radio station and
music server.
0 Up to 50 items can be stored in the Favorite List.
POWER
INFO
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
*
RANDOM REP
RANDO
REPEAT
AT
DEF
0 – 9, +10
CLEAR
MODE
.
Front/Top
panel
Rear panel
Remote control unit
38
Index
Contents
Connections
Playback
Settings
Registering stations or files to the
favorites list
1
2
1
Press FAVORITES ADD while the Internet radio station
or file to register is played back.
Use CH+, CH– or ui.
Deleting stations or files from the
favorite list
Use ui to select a number to register the station or
file, and press ENTER.
1
2
Calling stations or files from the
favorites list
3
Press FAVORITES CALL.
Use CH+, CH– or ui to select the station or file that
you want to call, and press ENTER.
The respective function starts up and playback starts.
Press FAVORITES CALL.
Use ui to select the station or file that you want to
delete, and press CLEAR.
When the prompt “Delete?” appears, press ENTER.
“Deleted” is displayed and the deletion is completed.
Press o to cancel the operation.
Press 0 – 9, +10 to call files registered to the Favorite list by number.
Front/Top
panel
Rear panel
Remote control unit
Appendix
To switch between registered stations
and files during playback
“Added To Favorites” is displayed and the registration is competed.
1
2
Tips
39
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing an iPod
0 You can use the USB cable provided with the iPod to connect the iPod
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
0 For information on the iPod models that can be played back with this
unit, see “Supported iPod/iPhone models” (v p. 22).
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
1/3
89
with the unit’s USB port and enjoy music stored on the iPod.
POWER
CH
iPod/USB
CH
ADD
SDB
TONE
FAVORITES
MUTE
VOLUME
CALL
TOP MENU
uio p
ENTER
RANDOM
REPEAT
INFO
INFO
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
DEF
MODE
MODE
.
Front/Top
panel
Rear panel
Remote control unit
40
Index
Contents
Connections
Playback
Settings
Listening to music on an iPod
1
2
When you connect iPod to the USB port, the input source
automatically switches to “iPod/USB”.
Press iPod/USB to switch the input source to “iPod/
USB”.
NOTE
0 Depending on the type of iPod and the software version, some functions may not
operate.
0 Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on an iPod when using this unit in conjunction with the iPod.
Operate iPod itself directly while seeing the iPod
screen to play back music.
Front/Top
panel
Rear panel
Remote control unit
Appendix
0 The iPod display modes include “Remote iPod” and “Browse iPod”. By default,
“Remote iPod”, where you directly operate the iPod itself while looking at the iPod
screen, is set.
0 To change to “Browse iPod” where operations are performed while the iPod
information is displayed on this unit, see “Setting operation mode (Browse iPod
mode)” (v p. 42).
0 You can also listen to iPod music using “AirPlay function” (v p. 52).
Connect the iPod to the USB port. (v p. 21)
“Remote iPod” is displayed on the display of this unit.
3
Tips
41
Index
Contents
Connections
Playback
Settings
Setting operation mode (Browse iPod
mode)
Operation buttons
Skip to previous track / Skip to next track
Use ui to select the file to be played, then press
ENTER.
Playback starts.
Remote iPod
Browse
iPod
Playable files Music file
P
P
Video file
z
Active buttons Remote control
unit (This unit)
iPod
P
P
Remote control unit
RANDOM
Random playback
REPEAT
Repeat playback
0 Switching between Single-track repeat and Alltrack repeat.
MODE
Switching between Browse iPod or Remote iPod
mode.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the artist name and album title.
NOTE
P
Rear panel
(Press and hold)
Fast-reverse / Fast-forward
0 Denon will accept no responsibility whatsoever for any loss of iPod data.
0 Depending on the type of iPod and the software version, some functions may not
operate.
z Only the sound is played.
Front/Top
panel
Function
(Press and hold) Stop
89
Press MODE and display “Browse iPod”.
Display mode
Appendix
Playback / Pause
1/3
In this mode, various lists and screens during playback on the iPod are
displayed on the body.
This section describes the steps up to playing back tracks on the iPod in
“Browse iPod”.
1
2
Tips
42
Index
Contents
Connections
Playback
Settings
Charging the iPod/iPhone
You can charge your iPod/iPhone by connecting it to USB port.
o Standby charging
If the unit enters power standby mode while the iPod/iPhone is
charging, the unit will switch to standby charging mode, and the iPod/
iPhone will continue to be charged. When in standby charging mode,
the power indicator lights turns red.
When the iPod/iPhone is fully charged, the unit automatically stops
supplying power for charging and enters normal power standby mode,
and the power indicator lights turns off.
Front/Top
panel
Rear panel
Remote control unit
43
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Playing a USB memory device
0 Playing back music files stored on a USB memory device.
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
(Media TransferProtocol) standards can be played on this unit.
0 This unit is compatible with USB memory devices in “FAT16” or
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
1/3
89
0 Only USB memory devices conforming to mass storage class and MTP
POWER
CH
“FAT32” format.
iPod/USB
0 This unit can play back the following files.
CH
0 WMA
0 MP3
ADD
SDB
TONE
FAVORITES
MUTE
0 WAV
0 MPEG-4 AAC
VOLUME
0 FLAC
CALL
TOP MENU
uio p
ENTER
SEARCH
RANDOM
REPEAT
INFO
INFO
0 ALAC
0 AIFF
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
DEF
0 – 9, +10
MODE
.
Front/Top
panel
Rear panel
Remote control unit
44
Index
Contents
Connections
Playback
Settings
Playing files stored on USB memory
devices
1
Operation buttons
Appendix
Function
Playback / Pause
1/3
Connect the USB memory device to the USB port.
(v p. 21)
(Press and Hold)
Stop
Skip to previous track / Skip to next track
89
When you connect USB memory device to the USB port, the input
source automatically switches to “USB”.
2
Tips
Use ui to select the file to be played, then press
ENTER.
(Press and hold)
Fast-reverse / Fast-forward
RANDOM
Random playback
REPEAT
Repeat playback
0 Switching between Single-track repeat and Alltrack repeat.
SEARCH
Character search
0 If the list is not in alphabetical order, you may not
be able to perform a character search.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the artist name and album title.
Playback starts.
NOTE
Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on a USB memory device when using this unit in conjunction with the
USB memory device.
o Files that can be played back
See “Playing back USB memory devices” (v p. 101).
Front/Top
panel
Rear panel
Remote control unit
45
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to music on a Bluetooth device
SLEEP
INTERNET
INTERNET
RADIO
Bluetooth
CLOCK
DIMMER
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
CH
ui
ENTER
Music files stored on Bluetooth devices such as smartphones, digital
music players, etc. can be enjoyed on this unit by pairing and connecting
this unit with the Bluetooth device.
Communication is possible up to a range of about 10 m.
POWER
CH
ADD
SDB
TONE
FAVORITES
MUTE
NOTE
1/3
89
To play back music from a Bluetooth device, the Bluetooth device needs to support
the A2DP profile.
VOLUME
CALL
TOP MENU
INFO
ENTER
SEARCH
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
DEF
MODE
.
Front/Top
panel
Rear panel
Remote control unit
46
Index
Contents
Connections
Playback
Settings
Pairing with a Bluetooth device
2
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
When using for the first time, the unit will go into the pairing mode
automatically and “Pairing Mode” will appear on the display of the
unit.
Rear panel
Remote control unit
Appendix
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
0 Connect to the Bluetooth device while “Pairing Mode” is being
displayed on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 1 m).
Press Bluetooth to switch the input source to
“Bluetooth”.
Front/Top
panel
Tips
0 When connecting a second Bluetooth device, either press and hold Bluetooth on
the remote control unit or SOURCE on this unit for approximately 3 seconds, or
press SEARCH when the input source is set to “Bluetooth” in order to pair with the
Bluetooth device.
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0 When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select “pair”
for both the Bluetooth device and the unit. (To select “pair” on this unit, press
ENTER on the unit.)
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
47
Index
Contents
Connections
Playback
Settings
Playing a Bluetooth device
Press Bluetooth to switch the input source to
“Bluetooth”.
The unit will automatically connect to the most recently used
Bluetooth device.
2
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
Start playing the Bluetooth device.
0 The Bluetooth device can also be operated with the remote
control of this unit.
Operation buttons
1/3
89
Front/Top
panel
Function
Playback / Pause
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-forward
Rear panel
Remote control unit
Appendix
0 When the power of this unit is turned on, the input source will be automatically
switched to “Bluetooth” if a Bluetooth device is connected.
0 When the “Network Control” setting of this unit is set to “On” and a Bluetooth
device is connected with the unit in the standby state, the power of the unit will be
turned on automatically.
0 Press INFO on this unit during playback to switch the display between Title name,
Artist name, Album name, etc.
0 Incompatible characters are displayed as “.” (period).
Check the following before you play back music.
0 The Bluetooth function of the Bluetooth device must be turned on
0 Pairing must be completed
1
Tips
48
Index
Contents
Connections
Playback
Settings
Pairing with the Pairing Mode
2
Press SEARCH when the input source is “Bluetooth”.
The device will go into the pairing mode.
0 Either press and hold Bluetooth for 3 seconds, or switch the input
source to “Bluetooth” and then press and hold SOURCE on this
unit for more than 3 seconds to switch to pairing mode.
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
Front/Top
panel
Rear panel
Remote control unit
Appendix
0 When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select “pair”
for both the Bluetooth device and the unit.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Pair a Bluetooth device with this unit.
1
Tips
49
Index
Contents
Connections
Playback
Settings
Connecting a Bluetooth device with the
NFC function via NFC
3
You can just touch this unit with a Bluetooth device to turn on power to this
unit and perform pairing or establish a connection between this unit and
the Bluetooth device.
1
2
0 For details, see the owner’s manual for your Bluetooth device.
Touch Q on this unit with the NFC antenna part on the
Bluetooth device.
If a pairing confirmation screen is displayed, follow the instructions
on this unit and the Bluetooth device to complete pairing.
0 Complete operations as instructed by the Bluetooth device.
Play back music on the Bluetooth device.
This unit outputs music from the Bluetooth device.
NOTE
0 Before establishing a NFC connection, cancel the lock function on the Bluetooth
device.
0 When you touch this unit with a Bluetooth device, do so softly.
.
Rear panel
Remote control unit
Appendix
0 When “Network Control” is set to “On”, startup and connection can be
performed even when the unit power is off.
0 When you touch the N mark (Q) on this unit with the Bluetooth device that
is playing back music, this unit outputs that music.
0 Touch the N mark (Q) again during the Bluetooth connection to disconnect
the connection.
0 Touch the N mark (Q) again if pairing or connection with the Bluetooth
device fails.
Turn on the NFC function on the Bluetooth device.
Front/Top
panel
Tips
50
Index
Contents
Connections
SLEEP
AUX
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
Playback
Settings
1
iPo
iPod/
USB
CH
2
3
CH
ADD
SDB
TONE
FAVORITES
MUTE
Appendix
Listening to DIGITAL IN
POWER
MUSIC
SERVER
AUX
Bluetooth
Blu
Tips
VOLUME
Prepare for playback.
Check the connection, then turn on this units.
Press AUX to select “AUX:Digital In”.
Play the component connected to this unit.
CALL
TOP MENU
INFO
Only 2-channel linear PCM digital audio signals can be inputted through the DIGITAL
IN connector of this unit.
ENTER
SEARCH
Listening to ANALOG IN
SETUP
1
./
4
GHI
2 ABC
3
5
DEF
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
1
2
3
MODE
.
Front/Top
panel
Rear panel
Remote control unit
51
Prepare for playback.
Check the connection, then turn on this units.
Press AUX to select “AUX:Analog In”.
Play the component connected to this unit.
Index
Contents
Connections
Playback
Settings
Tips
Appendix
AirPlay function
Music files stored on your iPhone, iPod touch, iPad or iTunes can be
played on this unit via the network.
PC
This unit
0
0
0
0
You can stop AirPlay playback by pressing o or choosing other input source.
To see song and artist names together, press INFO on the remote control unit.
For information about how to use iTunes, also see the Help for iTunes.
The screen may differ depending on the OS and software versions.
Router
.
Front/Top
panel
Rear panel
Remote control unit
52
Index
Contents
Connections
Playback
Settings
Playing songs from your iPhone, iPod
touch or iPad
1
2
Connect your iPhone, iPod touch or iPad Wi-Fi to the
same network as this unit.
0 For details, see your device’s manual.
2
3
Appendix
Playing iTunes music with this unit
If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can
stream music stored in your “iPhone/iPod touch/iPad” directly to this unit.
1
Tips
Install iTunes 10, or later, on a Mac or Windows PC that
is connected to the same network as this unit.
Turn this unit ON.
Set “Network Control” to “On” for this unit. (v p. 79)
NOTE
Play the song on your iPhone, iPod touch or iPad.
When “Network Control” is set to “On”, the unit consumes more standby
power.
' is displayed on the iPhone, iPod touch or iPad screen.
3
Tap the AirPlay icon '.
Start iTunes and click the AirPlay icon ' to select the
main unit.
.
4
AirDrop
AirPlay
Choose a song and click play in iTunes.
The music will stream to this unit.
.
4
Select this unit.
Front/Top
panel
Rear panel
Remote control unit
53
Index
Contents
Connections
Playback
Settings
Selecting multiple speakers (devices)
It is possible to play iTunes songs on your home’s AirPlay compatible
speakers (devices) other than those of this unit.
1
2
Click the AirPlay icon ' and select “Multiple”.
Check the speakers you want to use.
NOTE
In playback using the AirPlay function, the sound is output at the iPhone, iPod touch,
iPad or iTunes volume setting level.
You should turn down the iPhone, iPod touch, iPad or iTunes volume prior to
playback and then adjust it to a suitable level.
Front/Top
panel
Rear panel
Remote control unit
54
Index
Tips
Appendix
Contents
Connections
Playback
Tips
Settings
Appendix
Spotify Connect function
Spotify is the world’s most popular streaming service. If you subscribe to
Spotify Premium, you can control your new speaker with your phone or
tablet. Because Spotify is built-in to your speaker, you can still take calls or
use other apps - the music never stops.
To try Spotify Premium free for 30 days, or learn more about Connect,
please go to www.spotify.com/connect.
Playing Spotify music with this unit
Download the “Spotify App” onto your Android or iOS device beforehand.
To play a Spotify track in this unit, you need to register in the Spotify
premium account first.
1
.
Spotify server
Audio streaming/control
2
3
4
Connect the Wi-Fi settings of the iOS or Android device
in the same network as this unit.
Launch the Spotify App.
Play back the Spotify track.
Tap the F icon to select the unit.
0:13
Control
.
The music will stream to this unit.
This unit
Spotify App
Front/Top
panel
Rear panel
Remote control unit
55
Index
4:44
Contents
Connections
Playback
Tips
Settings
Appendix
Remote play function
You can use your home network to play back with this unit music files
stored on PC, NAS, smartphones and portable audio players.
In this case, you use PC, smartphones and portable audio players for
operations.
o Roles each device plays
The following devices are used for Remote Play. As specified in the
DLNA standard, these devices are called DMC, DMS or DMR
according to their role.
Name
0 The relevant devices should comply with the DLNA (Digital Living Network
Alliance) Ver. 1.5 standard.
0 A wireless LAN environment is required for playing back music files on
smartphones or portable audio players.
0 For some smartphones, you must install an application for DLNA music playback.
Device example
0 PC
DMC
(Digital Media
Controller)
0 Smartphone
0 Portable audio
player
0 Denon Hi-Fi
Role
Performs Remote Play
operations.
DMC can also play back
music files stored on these
devices.
Remote App
DMS
(Digital Media
Server)
DMR
(Digital Media
Renderer)
0 PC
0 NAS
Stores music files.
Music files stored on these
devices are played back with
DMC.
0 This unit
Outputs audio of music files
played back through Remote
Play from speakers. DMR
cannot perform playback
operations.
(Network Attached
Storage)
o Files that can be played back
See “Playing back files stored on PC or NAS” (v p. 104).
Front/Top
panel
Rear panel
Remote control unit
56
Index
Contents
Connections
Playback
Settings
Configure the settings so that this unit (DMR) can play back music files
stored on your portable audio player. For details on the settings, see
the owner’s manual of your portable player.
You must make settings on DMC and DMS for Remote Play. Make the
following settings. Also see the owner’s manual of each device for
settings.
o Settings on this unit
o Settings on computer and NAS
Connect this unit to the DLNA network. You do not need to make other
settings.
For the network connection, see the provided “Quick Setup Guide”,
“Connecting to a home network (LAN)” (v p. 23) and
“Settings” (v p. 80).
Make settings on computer and NAS to exchange data with DMR
devices.
For details on the settings, see “Applying media sharing
settings” (v p. 35).
o Settings on smartphones
You must install an application for DLNA music playback on your
smartphone to perform operations on DMS and this unit (DMR) with
your smartphone. The applicable application differs according to your
smartphone.
Some smartphones support DLNA music playback with the factory settings. See
the owner’s manual of your smartphone.
Rear panel
Remote control unit
Appendix
o Settings on portable audio players
Settings required for each device
Front/Top
panel
Tips
57
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Remote Play operations
Operations are different for each device, but the procedures for
preparing for Remote Play are the same. The preparation procedures
are shown below.
1
Turn on this unit.
2
Display the music file playback screen on DMC.
Press o to exit Remote Play mode.
NOTE
During Remote Play, you cannot perform playback operations with this unit. Use the
DMC device for these operations.
0 Make sure that this unit is connected to the network.
0 For PC, open Windows Media Player 12, etc.
0 For smartphones, switch to the music file playback mode.
3
Select the friendly name of this unit for the item that
sets the playback device on the playback screen.
0 The default Friendly Name of this unit is “Denon CEOL piccolo”.
4
Start playing back a music file on DMC.
0 The function on this unit automatically switches to “Music Server”
and the Remote Play mark m appears on the display. Remote
Play starts.
Front/Top
panel
Rear panel
Remote control unit
58
Index
Contents
Connections
Playback
Tips
Settings
Appendix
Web control function
You can control this unit from a web control screen on a web browser.
Controlling the unit from a web control
PC
1
2
Router
Switch the “Network Control” setting to “On”.
(v p. 79)
Check the IP address of this unit with “Network
Information”. (v p. 79)
This unit
[Network Information ]
.
IP Address
192.168.0.2
0 This unit and the PC need to be connected to the network properly in order to use
the web control function. “Connecting to a home network (LAN)” (v p. 23)
0 Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
Front/Top
panel
Rear panel
Remote control unit
Checking the IP address.
.
3
59
Start up the web browser.
Index
Contents
4
Connections
Playback
5
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.0.2”, enter
“http://192.168.0.2”.
w
http://192.168.0.2
Bonjour
apple
NETWORK
Yahoo! Japan
Tips
Settings
When the top menu is displayed, click on the menu
item you want to operate.
NETWORK
q
FIRMWARE
YouTube Wikipedia news(45)
Appendix
e
r
Please select the menu.
Please select the menu.
FIRMWARE
.
C Click when you setup network settings. (vGExample 1H)
D Click when you update firmware.
.
A Entering the IP address.
B If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
By adding this unit’s IP address to the browser’s bookmark, you can display
the web control screen using the bookmark function the next time you use the
browser. If you are using a DHCP server and “Network Control” (v p. 79)
is set to “Off”, turning the power on/off changes the IP address.
Front/Top
panel
Rear panel
Remote control unit
60
Index
Contents
6
Connections
Playback
Settings
Operate.
FIRMWARE
NETWORK
Denon CEOL piccolo
E To change the Friendly Name, enter the new name in the text
box and click “Set”.
F To reset the Friendly Name, click “Set Default”.
t
Friendly Name
Set
Network Connection
Select Connection
Wired
Test Connection
[+]DHCP or Proxy
y
Set Default
u
Only characters that can be displayed on this unit can be set. (v p. 72)
o
n Network connection settings
i
G Click to change the network connection method. If you select
“Wi-Fi”, a new item will appear on-screen. (vGExample 2H)
H Click to change DHCP/proxy settings. (vGExample 2H)
I Click to connect using the newly applied settings.
.
Front/Top
panel
Appendix
n Friendly Name setting
GExample 1H Network Setting 1
NETWORK
Tips
Rear panel
Remote control unit
61
Index
Contents
7
Connections
Playback
Settings
Operate.
FIRMWARE
J GExample 2H - Displayed when “Wi-Fi” is selected in G.
Select or input items as necessary, and then click “Test
Connection” to apply the changes.
0 Items displayed may vary depending on selected items and
connection status.
0 After selecting each item, wait a moment for the display to
be updated.
K GExample 2H - Displayed when “DHCP” or “Proxy” is selected
in H. When changing DHCP/proxy settings, input or select
for each item.
NETWORK
Friendly Name
Denon CEOL piccolo
Network Connection
Select Connection
Wi-Fi Setup
Manual
S SID
Security
Security Key
Defaullt Key
Appendix
n Network connection settings
GExample 2H Network Setting 2
NETWORK
Tips
Set
Set Default
Wi-Fi
Manual
--None
Q0
Key1
Test Connection
[-]DHCP or Proxy
DHCP
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Proxy
Address Or Name
Address
Port
ON
OFF
192.168.000.001
255.255.255.000
000.000.000.000
000.000.000.000
000.000.000.000
To apply network connection settings, click “Test Connection” after making
changes.
Q1
ON
OFF
Address
Name
000.000.000.000
00000
Save DHCP Proxy Settings
.
Front/Top
panel
Rear panel
Remote control unit
62
Index
Contents
Connections
Playback
o Update on web screen
2
“Web control function” (v p. 59) settings must be completed in
advance on a computer belonging to the same network. For
information on obtaining update files, please contact our customer
service center.
1
Tips
Settings
Appendix
When the following screen is displayed by the PC, click
the “Choose File” (A) button, select the update file,
and click the “Upload” (B) button.
Firmware
Click D from step 5 for the “Web control function”.
(v p. 59)
Choose File
Upload new firmware
The PC will display the following screen.
Wait for approximately 1 minute.
You can also gain access by entering the IP address shown by the
unit into a web browser.
q
Upload
w
G The web display H
.
FIRMWARE
3
Please wait...
Click “OK”.
Updating will begin.
Firmware
Warning:
Once started,the upload process cannot be interrupted or adorted,
in order to ensure the integrity of the Digital Media Player.
Are you sure you want to proceed?
.
OK
G The unit’s screen display H
e
.
NOTE
Do not operate the unit while updating is in progress.
.
Front/Top
panel
Rear panel
Remote control unit
63
Index
Contents
4
Connections
Playback
Settings
When the following screen is displayed, updating is
complete.
Firmware
New Firmware:
xxx.fw
Firmware upload status: 100% completed.
The upload process finished successfully.
Please close this.
.
Button names may vary depending on the OS language used on your computer.
Front/Top
panel
Rear panel
Remote control unit
64
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Convenience functions
SLEEP
CLOCK
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
DIMMER
MUSIC
SERVER
AUX
iPo
iPod/
USB
Bluetooth
Blu
CH
SDB
TONE
POWER
Adjusting the tone
66
Sleep timer function
67
Checking the current time
67
Switching the display’s brightness
68
CH
ADD
SDB
TONE
FAVORITES
MUTE
VOLUME
CALL
TOP MENU
uio p
ENTER
INFO
ENTER
SEARCH
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
RANDOM REP
RANDO
REPEAT
AT
*
SETUP
DEF
MODE
.
Front/Top
panel
Rear panel
Remote control unit
65
Index
Contents
Connections
Playback
Settings
n Treble
Adjusting the tone
1
2
Adjusts the treble sound.
Press SDB/TONE to select the tone parameter to be
adjusted.
–10dB – +10dB(Default : 0dB)
n Balance
Use ui to adjust “Super Dynamic Bass”, “Bass”,
“Treble”, “Balance” or “Source Direct”.
Use op to adjust the left/right volume balance.
n Source Direct
n Super Dynamic Bass
The tone is not adjusted.
Emphasizes the bass sound in stages according to the volume
(maximum +8 dB).
On / Off (Default: Off)
On / Off (Default: Off)
n Bass
Adjusts the bass sound.
–10dB – +10dB(Default : 0dB)
Front/Top
panel
Rear panel
Tips
Remote control unit
66
Index
Appendix
Contents
Connections
Playback
Settings
Sleep timer function
Appendix
Checking the current time
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
Tips
o Checking the current time when the power is
on
Press SLEEP during playback and select the setting
time.
Press CLOCK.
0 Press once more and the display returns to its original condition.
0 The o indicator on the display lights.
o Checking the current time when the power is
set to standby
0 You can set the sleep timer in the range from 10 to 90 minutes in
steps of 10 minutes.
Press CLOCK.
0 The current time is displayed for 30 seconds.
o To cancel the sleep timer
Press SLEEP to set “Sleep 1Off”.
The o indicator on the display turns off.
The time cannot be set when in the standby mode. Turn on the power first.
0 The sleep timer setting is canceled when the unit switches to standby mode.
0 To check the time remaining until the sleep timer is activated, press SLEEP.
Front/Top
panel
Rear panel
Remote control unit
67
Index
Contents
Connections
Playback
Settings
Switching the display’s brightness
1
Press DIMMER.
0 The brightness of the display switches each time the button is
pressed (5 levels).
If the buttons are operated when the display is turned off, information is displayed
temporarily at a low brightness level.
Front/Top
panel
Rear panel
Remote control unit
68
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Menu map
For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
o Quick Setup
Setting items
Quick Setup
Description
Performs the network settings using a Wizard style window.
For details on the operations, see the separate “Quick Setup Guide”.
Page
–
o General
Setting items
Description
Page
Alarm
Sets the timer playback.
74
Clock
Sets the current time.
75
Volume Limit
Make a setting for maximum volume.
75
Speaker Optimization
Sets the optimum playback properties of the speakers SC-N4, sold separately.
76
Language
Sets the language for display the menu.
76
Auto-Standby
Sets the unit power to standby when the unit is not in use.
76
Usage Data
Selects whether or not to send anonymous usage data to Denon.
76
Firmware
Set whether or not to check for firmware update, update the firmware, and display update and upgrade
notifications.
77
Update
Update the firmware of this unit.
77
Notifications
Set the Update, Upgrade and Alerts notification on/off.
77
Add New Feature
Display new features that can be downloaded to this unit and perform an upgrade.
78
Front/Top
panel
Rear panel
Remote control unit
69
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Network
Setting items
Description
Page
Network Information
Displays various information about the network.
79
Network Control
Performs the ON/OFF settings for the network function when in standby mode.
79
Friendly Name
Edits a name displayed on the Internet.
80
Settings
Performs the settings for a wired or wireless LAN.
80
Performs the settings for a wired LAN.
80
Performs the DHCP setting.
80
IP Address z
Performs the IP address setting.
81
Subnet Mask z
Performs the subnet mask setting.
81
Gateway
Performs the gateway setting.
81
Wired Setup
DHCP (On) or DHCP
(Off)
z
Performs the primary DNS setting.
81
Secondary DNS z
Performs the Secondary DNS setting.
81
Proxy
Performs the proxy setting.
81
Test Connection
Performs the wired LAN connection.
Primary DNS
z
–
Performs the wireless LAN connection setting.
82
Auto-Scan
Selects and sets the wireless connections from the access point list.
82
Share Wi-Fi setting
from an iOS device
Sets the wireless connection using an iOS device. (iOS version 7 or later)
83
Wi-Fi Setup Method
WPS (Wi-Fi Protected Sets the wireless connection using WPS (Wi-Fi Protected Setup).
Setup)
83
Web Browser Setup
Sets the wireless connection using web browser.
83
Manual
Sets the wireless connection manually.
85
z Displayed when the “DHCP” setting is “Off”. (v p. 80)
Front/Top
panel
Rear panel
Remote control unit
70
Index
Contents
Connections
SLEEP
INTERNET
INTERNET
RADIO
CLOCK
DIMMER
Playback
Settings
1
iPo
iPod/
USB
CH
2
CH
ADD
SDB
TONE
FAVORITES
MUTE
3
4
VOLUME
CALL
TOP MENU
uio p
ENTER
TOP MENU
INFO
SETUP
1
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10a/A
+1
0
CLEAR
*
RANDOM REP
RANDO
REPEAT
AT
Press SETUP.
The menu is displayed.
Use uiop to select the menu to be set or operated,
then press ENTER.
Use ui to change to desired setting.
Press ENTER to enter the setting.
0 To return to the previous item, press o.
0 Exiting the Menu, press SETUP while the menu is displayed.
ENTER
SEARCH
The menu display disappears.
SETUP
0 To back to the top of the menu, during menu operation, press
TOP MENU.
DEF
MODE
.
Front/Top
panel
Rear panel
Appendix
Menu operation
POWER
MUSIC
SERVER
AUX
Bluetooth
Blu
Tips
Remote control unit
71
Index
Contents
Connections
Playback
Tips
Settings
Appendix
Inputting characters
On this unit, you can change the name displayed on the following screens to the names that you prefer.
0 Text Search (v p. 31, 36, 45)
0 Character input for the network functions (v p. 31)
3
Using the number buttons
1
Press 0 – 9, +10 until the desired character is
displayed.
0 The types of characters that can be input are as shown below.
Display the screen for inputting characters.
0 To change a character, use op to align the cursor with the
character that you want to change.
2
Press +10 to select the character type (upper case,
lower case, or numeric characters).
[email protected]_/:
mnoMNO6
abcABC2
pqrsPQRS7
defDEF3
tuvTUV8
ghiGHI4
wxyzWXYZ9
jklJKL5
0 ( Space ) ! “ # $
%&‘()z+,;<=
>?[\]^`{|}
.
4
Front/Top
panel
Rear panel
Remote control unit
72
Repeat steps 2 and 3 to change the name then press
ENTER to register it.
Index
Contents
Connections
Playback
Settings
Using the cursor buttons
1
Display the screen for inputting characters.
0 To change a character, use op to align the cursor with the
character that you want to change.
2
Use ui to change the character.
0 The types of characters that can be input are as shown below.
GLower caseH
abcdefghijklmnopqrstuvwxyz
GUpper caseH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
!“#$%&‘()z+,-./:;<=>[email protected]
[\]^_`{|}~
GNumbersH 0123456789 (Space)
GSymbolsH
.
3
Repeat step 2 to change the name then press ENTER to
register it.
0 Press CLEAR to delete the character.
0 Press 9 to insert a space.
Front/Top
panel
Rear panel
Remote control unit
73
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
General
Make various other settings.
o Edit Alarm
Alarm
Edit the once alarm and everyday alarm.
Set the once alarm and everyday alarm.
1
2
o Once
Once Alarm Setting:
Set the once alarm to on.
Off:
The alarm does not operate.
3
o Every Day
Every Day:
Set the everyday alarm to on.
Off:
The alarm does not operate.
Use ui to select the alarm mode, then press ENTER.
Use ui to setting for the alarm start time, then press
ENTER.
Use ui to select the input source, then press ENTER.
0 When “Bluetooth” is selected, this unit attempts to connect to the
previously connected device.
4
Use ui to select the volume level “00 – 60”, then press
ENTER.
The display shows “Complete!!” and the setting is completed.
0 The power indicator lights orange when the unit is switched to
standby mode in this state.
Front/Top
panel
Rear panel
Remote control unit
74
Index
Contents
Connections
Playback
Settings
Clock
o Make a setting for maximum volume
You can automatically adjust the clock of this unit using the Internet.
Limits the volume to ensure safe use of this product, and also makes it
easier to adjust the volume from AirPlay or an app to an ideal range.
To use this function, the unit must be connected to the Internet.
30/45(Default)/60(Full throttle)/Other
Use ui to select your time zone, then press ENTER.
When “Other” is selected, the volume upper limit can be set within the
range of 16 - 60. Select the value using ui and then press ENTER to
enter the setting value.
Use ui to select the summer time, then press ENTER.
On:
Set the summer time to on.
Off (Default):
Set the summer time to off.
Front/Top
panel
Appendix
Volume Limit
o Set the current time
1
2
Tips
Rear panel
Remote control unit
When the maximum volume is set, if you increase the volume to the setting value and
press VOLUMEd again, “Allow max volume?” is displayed. If you press VOLUME d
again the maximum volume limit is canceled.
75
Index
Contents
Connections
Playback
Tips
Settings
Speaker Optimization
Appendix
Auto-Standby
An optimizing filter suited for the properties of the speakers (SC-N4) can
be used.
On (Default):
The response is optimized for the speakers (SC-N4, sold
separately).
Off:
The response is flat.
When “Auto-Standby” is set to “On”, and no operations are made in the
stopped state for the set amount of time, this unit automatically enters
standby mode.
For the input source “Remote iPod” only, when no operation is performed
for eight hours, this unit automatically enters the standby mode.
Language
Set the language for display on the menu.
English / Deutsch / Française / Italiano / Nederlands / Español /
Svenska / Русский / Polski (Default : English)
1min / 5min /
15min
(Default) /
Other:
When “Other” is selected, the “Auto-Standby” time can
be set within the range of 1 - 99 minutes. Select the
value using ui and then press ENTER to enter the
setting value.
Off:
The unit does not go into standby automatically.
Usage Data
For product improvement purposes, please send information on the
device settings and operating conditions of the functions to Denon.
Information provided by customers will be used as reference material for
product development purposes in the future.
Denon will never provide any information we collect to third parties.
Yes: Provide information on the operating status of this unit.
No:
Front/Top
panel
Rear panel
Remote control unit
76
Do not provide information on the operating status of this unit.
Index
Contents
Connections
Playback
Tips
Settings
Appendix
o Notifications
Firmware
Notification messages are displayed in the screen when the power is
switched on when new firmware can be used, or when there are other
notification messages.
Set whether or not to check for firmware update, update the firmware, and
display update, upgrade and alert notifications.
o Update
Update
Update the firmware of this unit.
Check For Update:
Check for firmware updates.
Update Start:
Execute the update process.
On (Default):
Display update message.
Off:
Do not display update message.
Upgrade
Even if the update fails, this unit will automatically try to update again.
On (Default):
Display upgrade message.
Off:
Do not display upgrade message.
Notification Alerts
Front/Top
panel
Rear panel
Remote control unit
77
On (Default):
Displays notification messages from Denon in the
popup menu.
Off:
Does not display notification messages from Denon in
the popup menu.
Index
Contents
Connections
Playback
Settings
o Add New Feature
Appendix
Notes concerning use of “Update” and “Add New Feature”
0 In order to add new functions, the environment and settings required
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade
package:
Display the items to be upgraded.
Upgrade
Status:
Display a list of the additional functions provided by
the upgrade.
for connecting to broadband internet are needed. (v p. 23)
0 Perform the add new feature operation after at least 2 minutes has
elapsed since turning this unit’s power on.
0 Do not turn off the power until updating or upgrading is completed.
0 Even with a broadband connection to the Internet, approximately 20
minutes is required for the updating/upgrading procedure to be
completed.
Execute the upgrade process. When the upgrade
starts, the menu screen is shut down. During the
Upgrade Start:
upgrade, the amount of upgrade time which has
elapsed is displayed.
Upgrade ID:
Tips
0 Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed. Furthermore,
updating/upgrading the firmware may reset the backup data for the
parameters, etc. set for this unit.
The ID number shown on the display is needed
when carrying out the procedure.
0 When the update or upgrade failed with a message such as “Update
failed” and “Download failed”, remove and re-insert the power cord.
“Update Retry” appears on the display and update restarts from the
point at which update failed. If the error continues despite this, check
the network environment.
0 See the Denon website for details about upgrades.
0 When the procedure is complete, “Registered” is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, “Not
Registered” is displayed.
Information regarding the “Update” function and “Add New Feature” will be
announced on the Denon web site each time related plans are defined.
Front/Top
panel
Rear panel
Remote control unit
78
Index
Contents
Connections
Playback
Tips
Settings
Appendix
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set “DHCP” to
On (use the default setting). This allows this unit to use your home network.
If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about your
home network such as the gateway address and subnet mask.
Network Information
Network Control
Display network information.
Enables network communication in standby power mode.
Friendly Name / DHCPOn or Off / IP Address / MAC Address /
SSIDz
z This is displayed only while a Wi-Fi connection is enabled.
On:
The network function can be used when in standby power
mode. Main unit operable with a network compatible
controller.
Off (Default):
The network function cannot be used in standby power
mode.
When using the Web control function or a network controller or when you want to use
Bluetooth/NFC quickly when the power is off, set “Network Control” to “On”.
NOTE
When “Network Control” is set to “On”, the unit consumes more standby power.
Front/Top
panel
Rear panel
Remote control unit
79
Index
Contents
Connections
Playback
Settings
Friendly Name
Appendix
Settings
The Friendly Name is the name of this unit displayed on the network. You
can change the Friendly Name according to your preferences.
You can make detailed settings for the network.
To change the network environment, perform “Quick Setup”. (For details
on the operations, see the separate “Quick Setup Guide”.)
0 If you are using a broadband router (DHCP function), there is no need to
make the settings at “IP Address” and “Proxy”, since the DHCP function
is set to “On” in this unit’s default settings.
0 Only set “Settings” when connecting to a network without a DHCP
function.
o Select Name
Selects Friendly Name from the list.
Current Friendly Name/Denon DRA-N4 / AV Room / Bedroom /
Dining Room / Family Room / Guest Room / Kids Room /
Kitchen / Living Room / Office / Denon CEOL piccolo(Default) /
Other
o When making wired connection
0 When you select “Other”, you can change the Friendly Name
according to your preferences.
n DHCP
Selects how to connect to the network.
Configure the network settings automatically from your
On (Default):
router.
0 Up to 63 characters can be input.
0 For character input, see 72).
Off:
Front/Top
panel
Tips
Rear panel
Remote control unit
80
Configure the network settings manually.
Index
Contents
Connections
Playback
Settings
n IP Address
Appendix
n Proxy
Set the IP address within the ranges shown below.
0 The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254
Make this setting when connecting to the Internet via a proxy server.
Make the proxy settings only when you connect to the Internet via a
proxy server that is on your internal network or provided by your
provider, etc.
Proxy (Off) or Proxy (On): Set the proxy server.
n Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
n Gateway
Proxy (Address) or Proxy
(Name):
Select when inputting by address or
domain name.
Address or Name:
Inputting address or domain name. Up
to 38 characters can be input.
Port:
Enter port number.
0 If you cannot connect to the Internet, recheck the connections and settings.
(v p. 23)
0 If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
When connected to a gateway (router), input its IP address.
n Primary DNS, Secondary DNS
If there is only one DNS address indicated in the documentation
supplied by your provider, enter it for “Primary DNS”. If two or more
DNS are provided by your provider, enter one for “Secondary DNS”.
Front/Top
panel
Tips
Rear panel
Remote control unit
81
Index
Contents
Connections
Playback
Settings
o When making Wi-Fi connection
Tips
n Auto-Scan
This automatically searches for networks.
In this menu, Wi-Fi settings and connections can be made using any of
the five connection methods
Auto-Scan / Share Wi-Fi setting from an iOS device / WPS (Wi-Fi
Protected Setup) / Web Browser Setup / Manual
1
From the list of the networks, select the one you want
to connect to.
0 Select “Rescan” if the network cannot be found.
2
0 If a LAN cable is connected, remove it.
0 See the Quick Setup Guide for details on how to connect to Wi-Fi using the
Wi-Fi CONNECT button on the rear panel.
Make the following settings.
Default Key:
Select the default key.
0 When connecting to a WEP encrypted
network, “Default Key” menu is displayed.
Password:
Input the password.
DHCP/Proxy:
Performs the DHCP and proxy setting.
(v p. 80, 81)
Test Connection: Test the connection.
Front/Top
panel
Rear panel
Appendix
Remote control unit
82
Index
Contents
Connections
Playback
Settings
n Share Wi-Fi setting from an iOS device
Use a web browser to set up Wi-Fi.
A Wi-Fi device that can perform web browse operations is required.
1
2
Read the precautions on the screen, and press ENTER.
Select “Denon CEOL piccolo” from the Wi-Fi network
list of the Wi-Fi device.
The IP address (192.168.1.16) appears on the unit.
The iOS version must be 7 or later.
n WPS (Wi-Fi Protected Setup)
Register the PIN code of the unit in the router.
Front/Top
panel
Rear panel
Remote control unit
Appendix
n Web Browser Setup
You can use an iOS device such as an iPhone or iPad to configure WiFi settings.
After selecting this item, select Settings/Wi-Fi from the iOS device
home screen, select “Denon CEOL piccolo” displayed at the bottom of
the screen, and then follow the setting instructions displayed on the
iOS device.
For details, see the “Quick Setup Guide”.
1
Tips
83
Index
Contents
3
Connections
Playback
5
Enter the IP address of this unit in browser’s address
box.
w
http://192.168.1.16
Bonjour
apple
Yahoo! Japan
Appendix
Operate.
GExample 1H Network Setting 1
q
YouTube Wikipedia news(45)
NETWORK
Please select the menu.
NETWORK
Tips
Settings
NETWORK
Friendly Name
Denon CEOL piccolo
Network Connection
Select Connection
Select Connection
r
Test Connection
.
A Entering the IP address (192.168.1.16).
B If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
4
.
n Network connection settings
D Click to change the network connection method. If you select
“Wi-Fi”, a new item will appear on-screen.
(vGExample 2H)
When the top menu is displayed, click “NETWORK”.
NETWORK
e
Please select the menu.
.
C Click “NETWORK”. (vGExample 1H)
Front/Top
panel
Rear panel
Remote control unit
84
Index
Contents
Connections
Playback
Settings
Sets the wireless connection manually
SSID :
Input the name of the wireless network (SSID).
NETWORK
Friendly Name
Denon CEOL piccolo
Network Connection
Select Connection
Manual
SSID
Security
Security Key
Defaullt Key
Security:
Select the encryption method according to the
encryption setting of the access point you are
using.
Default Key:
Select the Default Key.
0 When connecting to a “WEP” encrypted
network, “Default Key” menu is displayed.
Password:
Input the password.
DHCP/Proxy:
Performs the DHCP and proxy setting. (v p. 80,
81)
Wi-Fi
--None
t
Key1
Test Connection
.
n Network connection settings
Test Connection: Test the connection.
E GExample 2H - Displayed when “Wi-Fi” is selected in D. Select or
input items as necessary, and then click “Test Connection” to apply
the changes.
0 Items displayed may vary depending on selected items and
connection status.
0 After selecting each item, wait a moment for the display to be
updated.
To apply network connection settings, click “Test Connection” after making
changes.
Front/Top
panel
Rear panel
Appendix
n Manual
GExample 2H Network Setting 2
NETWORK
Tips
Remote control unit
85
Index
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Troubleshooting
Tips
Power does not turn on / Power is turned off
89
87
LED is flashing
89
Simple operations for iPod/USB
87
Operations cannot be performed through the remote control unit
90
I only want to recharge my iPod
87
Display on this unit shows nothing
90
Specifying the iPod track with the alarm function
87
No sound comes out
91
Specifying the desired track with the alarm function
87
Desired sound does not come out
92
Change to summer time
87
Sound is interrupted or noise occurs
93
Changing or resetting the network environment
88
iPod cannot be played back
94
Volume adjustment is difficult when using AirPlay or app operation,
and the sound suddenly becomes too loud
USB memory devices cannot be played back
95
88
Bluetooth cannot be played back
96
File names on the iPod/USB memory device are not displayed
properly
96
The Internet radio cannot be played back
97
Music files on PC or NAS cannot be played back
98
Cannot connect by Wi-Fi
99
Simple operations in the power off state
Front/Top
panel
Rear panel
Remote control unit
86
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Tips
Simple operations in the power off state
0 When a input source select buttons, 1/3 button, FAVORITES CALL button or 5 button is pressed, the operation is performed at the same time as the
unit switches on. (v p. 28, 38)
0 When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, Denon “Hi-Fi Remote” app. (v p. 79)
Simple operations for iPod/USB
0 When connected to the USB port, the Input Source automatically changes and playback begins. (v p. 41, 44)
I only want to recharge my iPod
0 Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. (v p. 43)
Specifying the iPod track with the alarm function
0 Connect the iPod to this unit by USB and then press the MODE button to register your favorite tracks in the favorites using Browse iPod
mode. (v p. 38) Then set a track registered in the favorites as the alarm. (v p. 74)
0 When using alarm playback on an iPod touch or iPhone, set the iPod touch or iPhone to “Sleep” mode. If the power is switched off using the power off
operation, alarm playback cannot be used.
Specifying the desired track with the alarm function
0 After registering the desired track in NAS, etc., register the track in the favorites and then specify the track in the alarm settings. (v p. 74)
Change to summer time
0 Select “General” - “Clock” in the setup menu and configure the settings. (v p. 75)
Front/Top
panel
Rear panel
Remote control unit
87
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Changing or resetting the network environment
0 Prepare the provided Quick Setup Guide, and run Setup – “Quick Setup”. For detailed settings, run Setup - “Network” - Settings. (v p. 80)
Volume adjustment is difficult when using AirPlay or app operation, and the sound suddenly becomes too loud
0 Reducing the “Volume Limit” setting value (to around 20 to 30) limits the volume setting from AirPlay or an app to an ideal range and makes it easier to
adjust the volume. (v p. 75)
Front/Top
panel
Rear panel
Remote control unit
88
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Troubleshooting
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power does not turn on.
0 Check whether the power plug is correctly inserted into the power outlet.
26
Power automatically turns
off.
0 The sleep timer is set. Turn on the power again.
67
0 “Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To
76
Cause / Solution
Page
disable “Auto-Standby”, set “Auto-Standby” on the menu to “Off”.
o LED is flashing
Symptom
Flashing red.
0 The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center.
-
0 The clock is incorrect because the AC was temporarily switched off, etc. Check the network connection
75
and adjust the clock.
Front/Top
panel
Rear panel
Remote control unit
89
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Operations cannot be performed through the remote control unit
Symptom
Operations cannot be
performed through the
remote control unit.
Cause / Solution
0 Batteries are worn out. Replace with new batteries.
Page
6
0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
6
0 Remove any obstacle between this unit and the remote control unit.
-
0 Insert the batteries in the proper direction, checking the q and w marks.
6
0 The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
-
0 When using a 3D video device, the remote control unit of this unit may not function due to effects of
-
light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
o Display on this unit shows nothing
Symptom
Display is off.
Front/Top
panel
Cause / Solution
0 Press the DIMMER button on the remote control to set any setting other than OFF.
Rear panel
Remote control unit
90
Index
Page
68
Contents
Connections
Playback
Settings
Tips
Appendix
o No sound comes out
Symptom
No sound comes out of
speakers.
Cause / Solution
0 Check the connections for all devices.
17
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the
17
0 Check that a proper input source is selected.
28
0 Adjust the volume.
29
0 Cancel the mute mode.
29
0 Check that the correct input source is selected when audio is being input to this unit from an external
51
0 Check the digital audio output setting on the connected device. The initial settings may be off depending
51
0 Only 2-channel linear PCM can be input as the digital audio signal to the DIGITAL IN connector of this
51
0 No sound is output from the speakers when headphones are connected.
10
metal part on speaker terminals. Also, securely tighten speaker terminals. Check speaker terminals for
looseness.
device.
on the device.
unit.
Front/Top
panel
Page
Rear panel
Remote control unit
91
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Desired sound does not come out
Symptom
Cause / Solution
Page
Left/right volume balance is 0 Press the SDB/TONE button on the remote control to adjust the balance.
unbalanced.
66
No sound from the sub
woofer.
18
0 Check the subwoofer connections.
0 Switch the subwoofer power on.
-
Set values are not reflected 0 “Super Dynamic Bass”, “Bass” and “Treble” setting values are not reflected in subwoofer out.
in “Super Dynamic Bass”,
“Bass” and “Treble”.
Front/Top
panel
Rear panel
Remote control unit
92
Index
66
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound is interrupted or noise occurs
Symptom
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
When making a call on
iPhone, noise occurs in
audio output on this unit.
Cause / Solution
-
0 The network communication speed is slow or the radio station is busy.
-
0 When making a call, keep a distance of 20 cm or longer between iPhone and this unit.
-
Sound cuts out when using 0 If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
Wi-Fi connection.
connection.
0 Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
Front/Top
panel
Page
0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
Rear panel
Remote control unit
93
Index
23
80
Contents
Connections
Playback
Settings
Tips
Appendix
o iPod cannot be played back
Symptom
Cause / Solution
iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported.
-
0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to
23
0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to
-
0 The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on iTunes /
-
0 The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon ' on the
52
0 Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using
-
0 Some external factors may be affecting the wireless connection. Modify the network environment by
-
0 Enable the “Allow iTunes audio control from remote speakers” setting on iTunes. Then, you can perform
-
the same LAN as this unit.
the latest version.
No sound is produced.
iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume level.
iTunes / iPhone / iPod touch / iPad screen and select this unit.
Audio is interrupted during
the AirPlay playback on
iPhone / iPod touch / iPad.
AirPlay.
taking measures such as shortening the distance from the wireless LAN access point.
iTunes cannot be played
back through the remote
control unit.
Front/Top
panel
22
0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
recognized. Use a genuine USB cable.
The AirPlay icon ' is not
displayed on iTunes /
iPhone / iPod touch / iPad.
Page
playback, pause, and skip operations through the remote control unit.
Rear panel
Remote control unit
94
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o USB memory devices cannot be played back
Symptom
“No Connection” is
displayed.
Cause / Solution
0 The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device.
0 USB memory devices of a mass storage class or those compatible with MTP are supported.
-
-
0 The USB memory device must be formatted to FAT16 or FAT32.
-
0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
-
0 Files of a type not supported by this unit are not displayed.
44
0 This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in total. Modify
-
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
the folder structure of the USB memory device.
Files on a USB memory
device cannot be played.
0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
-
0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
44
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
-
played on this unit.
Front/Top
panel
21
0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
Files on the USB memory
device are not displayed.
Page
Rear panel
Remote control unit
95
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Bluetooth cannot be played back
Symptom
Bluetooth devices cannot
be connected to this unit.
NFC connection fails
The sound is cut off.
Cause / Solution
Page
0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
-
0 Bring the Bluetooth device near to this unit.
-
Bluetooth device to enable the Bluetooth function.
0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
-
0 Turn the power of the Bluetooth device off and on again, and then try again.
-
0 Set “Network Control” to “On” and connect again.
79
0 Check the NFC settings on each Bluetooth device.
-
0 Cancel the Lock function on each Bluetooth device.
-
0 Check the NFC position on each Bluetooth device, and then move the NFC close to Q on this unit.
50
0 Set “Network Control” to “On” and connect again.
79
0 Bring the Bluetooth device near to this unit.
-
0 Remove obstructions between the Bluetooth device and this unit.
-
0 To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
-
0 Reconnect the Bluetooth device.
-
devices and other Bluetooth devices.
o File names on the iPod/USB memory device are not displayed properly
Symptom
The file names are not
displayed properly (“…”,
etc.).
Front/Top
panel
Cause / Solution
0 Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that
cannot be displayed are replaced with a “.” (period).
Rear panel
Remote control unit
96
Index
Page
-
Contents
Connections
Playback
Settings
Tips
Appendix
o The Internet radio cannot be played back
Symptom
Cause / Solution
Page
The radio station list is not
displayed.
0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status.
23
Internet Radio cannot be
played.
0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can
103
be played back in this unit are MP3, WMA and AAC.
0 The firewall function is enabled on the router. Check the firewall setting.
-
0 The IP address is not properly set.
80
0 Check the power of the router is on.
-
0 To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the
80
0 To obtain the IP address manually, set the IP address and proxy on this unit.
80
0 Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a
31
Cannot connect to favorite
radio stations.
0 Radio station is not currently in service. Register radio stations in service.
-
For some radio stations,
“Connection Down” is
displayed and station
cannot be connected to.
0 The selected radio station is not in service. Select a radio station in service.
-
DHCP setting to “On” on this unit.
while and select the same radio station, or select another radio station.
Front/Top
panel
Rear panel
Remote control unit
97
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Music files on PC or NAS cannot be played back
Symptom
Files stored on a computer
cannot be played.
Cause / Solution
0 Files are stored in a non-compatible format. Record in a compatible format.
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
played on this unit.
Music files on PC cannot
be played back.
-
35
0 The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall settings.
-
0 Computer’s power is not turned on. Turn on the power.
-
0 Server is not running. Launch the server.
-
0 Set’s IP address is wrong. Check the set’s IP address.
79
0 Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC
23
to this unit through the network.
104
0 If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS
-
0 If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows
35
0 If connection is restricted, set audio equipment as the connection target.
-
setting.
Media Player’s media sharing function and add NAS to the selected play folder.
Front/Top
panel
-
0 The set’s USB port cannot be used for connection to a computer.
Files on PC or NAS are not 0 Files of a type not supported by this unit are not displayed.
displayed.
Music stored on a NAS
cannot be played.
104
0 Media sharing settings are not correct. Change media sharing settings so that the unit can access the
folders on your computer.
Server is not found, or it is
not possible to connect to
the server.
Page
Rear panel
Remote control unit
98
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Cannot connect by Wi-Fi
Symptom
Cannot connect to the
network.
Cause / Solution
85
0 Reduce the distance between the wireless LAN access point and this unit, remove any obstructions and
-
0 Check the router power supply.
-
according to the setting details of this unit.
make sure the view to the access point is unobstructed before trying to connect again. Also, install
microwave ovens and other network access points as far away as possible.
Cannot connect to WPS.
0 This unit supports IEEE802.11.b/g/n.
-
0 Configure the access point channel settings away from channels that are being used by other networks.
-
0 This unit is not compatible with WEP (TSN).
-
0 Check that the WPS mode of the router is operating.
-
0 Press and hold the Wi-Fi CONNECT/WPS button on this unit for approx. 3 seconds within 2 minutes of
-
0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to
80
0 If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the Wi-Fi
85
operating the router.
“None”, “WPA-PSK (AES)” or “WPA2-PSK (AES)”.
CONNECT/WPS button. In this case, use the “Auto-Scan” or “Manual” method to connect.
Cannot connect to the
network using iPhone/iPod
touch/iPad.
Front/Top
panel
Page
0 The network name and password (WEP, etc.) settings are wrong. Configure the network settings
0 Update the iPhone/iPod touch/iPad firmware to the latest version.
-
0 When using a USB cable to configure the settings, the iOS device firmware version needs to support iOS
-
5 or later. When configuring the settings via a wireless connection, iOS 7 or later needs to be supported.
Rear panel
Remote control unit
99
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
1
2
VOLUME
3
ENTER
When power is switched to standby.
Press the power button (X) while pressing VOLUMEdf
together on this unit.
When the power indicator lights, release the all
buttons.
“Initialized” appears on the display.
.
Front/Top
panel
VOLUME df
Rear panel
If “Initialized” does not display in step 3, start over from step 1.
Remote control unit
100
Index
Contents
Connections
Playback
Settings
Sampling
frequency
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit is compatible with WMA META tags.
0 If the image size of an album artwork exceeds 600 kB, then music may
not be played back properly.
WMAz1
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/
88.2/96/176.4/
192 kHz
MPEG-4 AACz2
32/44.1/48 kHz
FLAC
ALAC z3
AIFF
Rear panel
Remote control unit
Appendix
o Compatible formats
Playing back USB memory devices
Front/Top
panel
Tips
101
Index
32/44.1/48/
88.2/96/176.4/
192 kHz
32/44.1/48/
88.2/96kHz
32/44.1/48/
88.2/96/176.4/
192 kHz
Bit
length
Extension
–
.wma
–
.mp3
–
16/24
bits
.wav
16 – 320
kbps
–
.aac/
.m4a/
.mp4
–
16/24
bits
.flac
–
16/24
bits
.m4a
–
16/24
bits
.aif/
.aiff
Bit rate
48 – 192
kbps
32 – 320
kbps
Contents
Connections
Playback
Tips
Settings
Appendix
o Maximum Number of Playable Files and Folder
z1 Copyright-protected files can be played on certain portable players compatible
with MTP.
z2 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
z3 Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License,
Version 2.0 (the “License”); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
The limits on the number of folders and files that can be displayed by
this unit are as follows.
Media
Item
Memory capacity
Number of folder directory
levels z1
USB memory device
FAT16 : 2 GB, FAT32 : 2 TB
8 levels
Number of folders
500
filesz2
5000
Number of
z1 The limited number includes the root folder.
z2 The allowable number of files may differ according to the USB memory device
capacity and the file size.
Front/Top
panel
Rear panel
Remote control unit
102
Index
Contents
Connections
Playback
Settings
Playing back Internet Radio
Sampling
frequency
Bit rate
Extension
WMA
32/44.1/48 kHz
48 – 192
kbps
.wma
MP3
32/44.1/48 kHz
32 – 320
kbps
.mp3
MPEG-4 AAC
32/44.1/48 kHz
16 – 320 kbps
.aac/
.m4a/
.mp4
Rear panel
Appendix
Playing back Bluetooth devices
This unit supports the following Bluetooth profiles.
0 A2DP (Advanced Audio Distribution Profile) :
When a Bluetooth device that supports this specification is connected,
you can perform high quality streaming distribution of monaural and
stereo audio data.
0 AVRCP (Audio/Video Remote Control Profile) :
When a Bluetooth device that supports this specification is connected,
you can operate the Bluetooth device from this unit.
o Playable broadcast station specifications
Front/Top
panel
Tips
Remote control unit
Bluetooth communications
The radio waves broadcast from this unit may interfere with operations on
medical equipment. The radio wave interference may cause a malfunction.
Therefore, make sure to turn off power to this unit and Bluetooth devices in
the following places.
0 Hospitals, trains, airplanes, gas stands, and other places where
flammable gas may occur.
0 Places near automatic doors and fire alarms.
103
Index
Contents
Connections
Playback
Settings
Sampling
frequency
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit is compatible with WMA META tags.
0 If the image size of an album artwork exceeds 600 kB, then music may
not be played back properly.
0 A server or server software compatible with distribution in the
WMA
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/
88.2/96/176.4/
192 kHz
MPEG-4 AACz1
32/44.1/48 kHz
corresponding formats is required to play music files via a network.
Particularly when you play back large music files, depending on your wireless LAN
environment, the playback sound may be interrupted. In this case, make the wired
LAN connection.
32/44.1/48/
88.2/96/176.4/
192 kHz
32/44.1/48/
88.2/96kHz
32/44.1/48/
88.2/96/176.4/
192 kHz
FLAC
ALACz2
AIFF
Rear panel
Remote control unit
Appendix
o Playback file specifications
Playing back files stored on PC or
NAS
Front/Top
panel
Tips
104
Index
Bit rate
Bit length
Extension
48 – 192
kbps
32 – 320
kbps
-
.wma
-
.mp3
-
16/24 bits
.wav
16 – 320
kbps
-
.aac/
.m4a/
.mp4
-
16/24 bits
.flac
-
16/24 bits
.m4a
–
16/24 bits
.aif/
.aiff
Contents
Connections
Playback
Settings
Rear panel
Remote control unit
Appendix
Last function memory
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
z2 Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License,
Version 2.0 (the “License”); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Front/Top
panel
Tips
This stores the settings as they were immediately before going into the
standby mode.
When the power is turned back on, the settings are restored to as they
were immediately before going into the standby mode.
105
Index
Contents
Connections
Playback
Settings
Explanation of terms
FLAC stands for Free lossless Audio Codec, and is a lossless free audio
file format. Lossless means that the audio is compressed without any loss
in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006,2007, 2008,
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
ALAC (Apple Lossless Audio Codec)
This is a codec for lossless audio compression method developed by
Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data
compressed to approximately 60 – 70% can be decompressed to exactly
the same original data.
AIFF (Audio Interchange File Format)
This is an uncompressed and lossless format for digital audio. Use AIFF
files to burn high-quality audio CDs from imported songs. AIFF files use
approximately 10 MB of disk space per minute.
Rear panel
Appendix
FLAC
o Audio
Front/Top
panel
Tips
Remote control unit
106
Index
Contents
Connections
Playback
Settings
Tips
Appendix
MP3 (MPEG Audio Layer-3)
Sampling frequency
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4
These are the names for digital compression format standards used for
the encoding of video and audio. Video standards include “MPEG-1
Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”.
Speaker impedance
This is an AC resistance value, indicated in Ω (Ohms). Greater power can
be obtained when this value is smaller.
WMA (Windows Media Audio)
Bit rate
This is audio compression technology developed by Microsoft
Corporation.
WMA data can be encoded using Windows Media® Player. To encode
WMA files, only use applications authorized by Microsoft Corporation. If
you use an unauthorized application, the file may not work properly.
This expresses the read amount per 1 second of video/audio data
recorded. A larger number means higher sound quality, but also means a
larger file size.
Front/Top
panel
Rear panel
Remote control unit
107
Index
Contents
Connections
Playback
Settings
o Network
Appendix
IEEE 802.11b
AES (Advanced Encryption Standard)
This is one wireless LAN standard set by the 802 working group that
establishes LAN technology standards at the IEEE (Institute of Electrical
and Electronics Engineers) of the United States. It uses the 2.4 GHz band
usable freely without a radio frequency license (ISM band), enabling
communications at a maximum speed of 11 Mbps.
The value indicated above is the maximum theoretical value for the
wireless LAN standard, and does not indicate the actual data transfer rate.
This is a next generation standard encryption method replacing the current
DES and 3DES, and because of its high security it is expected to be
applied widely to wireless LANs in the future. It uses the “Rijndael”
algorithm developed by two Belgian cryptographers to divide the data into
blocks of fixed lengths and encrypt each block. It supports data lengths of
128, 192 and 256 bits and key lengths of 128, 192 and 256 bits as well,
offering extremely high encryption security.
IEEE 802.11g
AirPlay
This is another wireless LAN standard set by the 802 working group that
establishes LAN technology standards at the IEEE (Institute of Electrical
and Electronics Engineers) of the United States, and is compatible with
IEEE 802.11b. It also uses the 2.4 GHz band, but enables
communications at a maximum speed of 54 Mbps.
The value indicated above is the maximum theoretical value for the
wireless LAN standard, and does not indicate the actual data transfer rate.
AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod
touch/iPad to a compatible device via the network.
DLNA
DLNA and DLNA CERTIFIED are trademarks and/or service marks of
Digital Living Network Alliance. Some contents may not be compatible
with other DLNA CERTIFIED® products.
Front/Top
panel
Tips
Rear panel
Remote control unit
108
Index
Contents
Connections
Playback
Settings
Tips
Appendix
IEEE 802.11n
WEP Key (network key)
This is another wireless LAN standard set by the 802 working group that
establishes LAN technology standards at the IEEE (Institute of Electrical
and Electronics Engineers) of the United States, and is compatible with
IEEE 802.11a/bg. It uses the 2.4/5 GHz band, enabling communications at
a maximum speed of 600 Mbps.
The value indicated above is the maximum theoretical value for the
wireless LAN standard, and does not indicate the actual data transfer rate.
This is key information used for encrypting data when conducting data
transfer. On this unit, the same WEP key is used for data encryption and
decryption, so the same WEP key must be set on both devices in order for
communications to be established between them.
Wi-Fi®
Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi
Alliance, a group certifying interoperability among wireless LAN devices.
TKIP (Temporal Key Integrity Protocol)
WPA (Wi-Fi Protected Access)
This is a network key used for WPA. The encryption algorithm is RC4, the
same as for WEP, but the security level is increased by changing the
network key used for encryption for each packet.
This is a security standard established by the Wi-Fi Alliance. In addition to
the conventional SSID (network name) and WEP key (network key), it also
uses a user identification function and encrypting protocol for stronger
security.
vTuner
This is a free online content server for Internet Radio.
For inquiries about this service, visit the vTuner site below.
vTuner website:
http://www.radiodenon.com
This product is protected by certain intellectual property rights of Nothing
Else Matters Software and BridgeCo. Use or distribution of such
technology outside of this product is prohibited without a license from
Nothing Else Matters Software and BridgeCo or an authorized subsidiary.
Front/Top
panel
Rear panel
Remote control unit
WPA2 (Wi-Fi Protected Access 2)
This is a new version of the WPA established by the Wi-Fi Alliance,
compatible with more secure AES encryption.
109
Index
Contents
Connections
Playback
Settings
This is a simple authentication system for mutual authentication when a
preset character string matches on the wireless LAN access point and
client.
iTunes
iTunes is the name of the multimedia player provided by Apple Inc.
It enables management and playback of multimedia contents including
music and movies. iTunes supports many main file formats including AAC,
WAV, and MP3.
WPS (Wi-Fi Protected Setup)
This is a standard drawn up by the Wi-Fi Alliance to ease the task of
setting up wireless LAN connections and configuring security.
There are two methods: push-button and PIN (Personal Identification
Number) code.
Windows Media Player
This is a media player distributed free of charge by Microsoft Corporation.
It can play playlists created with Ver.11 or later of Windows Media Player,
as well as WMA, DRM WMA, WAV, and other files.
Network Names (SSID: Security Set Identifier)
When forming wireless LAN networks, groups are formed to prevent
interference, data theft, etc. These groups are based on “SSID (network
names)”. For enhanced security, a WEP key is set so that communication
is unavailable unless both the “SSID” and the WEP key match. This is
suitable for temporarily constructing a simplified network.
Rear panel
Appendix
o Media player
WPA-PSK/WPA2-PSK (Pre-shared Key)
Front/Top
panel
Tips
Remote control unit
110
Index
Contents
Connections
Playback
Settings
o Others
Finalizing
Finalization is the process that makes recorded CD-R/CD-RW discs
playable on compatible players
Pairing
Pairing (registration) is an operation that is required in order to connect a
Bluetooth device to this unit using Bluetooth. When paired, the devices
authenticate each other and can connect without mistaken connections
occurring.
When using Bluetooth connection for the first time, you need to pair this
unit and the Bluetooth device to be connected.
This unit can store pairing information for a maximum of 8 devices.
Protection circuit
This is a function to prevent damage to devices within the power supply
when an abnormality such as an overload, excess voltage occurs or over
temperature for any reason. If a malfunction occurs in this unit, the power
indicator blinks red and the unit switches to standby mode.
Front/Top
panel
Rear panel
Remote control unit
111
Index
Tips
Appendix
Contents
Connections
Playback
Tips
Settings
Appendix
Trademark information
.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc.
is under license. Other trademarks and trade names are those of their
respective owners.
.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone,
respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this
accessory with iPod, or iPhone, may affect wireless performance.
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic, iPod nano,
iPod shuffle and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
0 Individual users are permitted to use iPhone, iPod, iPod classic, iPod
nano, iPod shuffle, and iPod touch for private copy and playback of
non-copyrighted contents and contents whose copy and playback is
permitted by law. Copyright infringement is prohibited by law.
.
Adobe, the Adobe logo and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in
the United States and in other countries.
Front/Top
panel
Rear panel
Remote control unit
112
Index
Contents
Connections
Playback
Settings
Specifications
o Audio section
0 Audio amplifier
Rated output:
2-channel
40 W + 40 W (4 Ω/ohms, 1 kHz, THD + N 0.7 %)
Dynamic power:
50 W + 50 W (4 Ω/ohms, 1 kHz, THD + N 10 %)
Output terminals:
Speaker: 4-16 Ω/ohms (impedance)
Compatible with headphones/stereo headphones
Input sensitivity/impedance:
Analog In: 200 mV/22 kΩ/kohms
Total harmonic distortion
(1 kHz, 5 W, 4 Ω/ohms):
Analog In: 0.1 %
S/N Ratio (10 W, 4 Ω/ohms, IHF-A):
Analog In : 90 dB
Tone control:
SDB : +8 dB (100 Hz)
Bass : ±10 dB (100 Hz)
Treble : ±10 dB (10 kHz)
Frequency response:
Analog In : 10 Hz – 40 kHz (±3dB)
Front/Top
panel
Rear panel
Remote control unit
113
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
o Wireless LAN section
Network type (wireless LAN standard):
Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
Conforming to IEEE 802.11n
(Wi-Fi® compliant)z1
Security:
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
No. of channels:
1 – 13 ch
z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Front/Top
panel
Rear panel
Remote control unit
114
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Bluetooth section
Communications system:
Bluetooth Version 2.1 + EDR (Enhanced Data Rate)
Transmission power:
Maximum 2.5 mW (Class 2)
Maximum communication range:
Approx. 10 m in line of sightz2
Frequency band:
2.4 GHz band
Modulation scheme:
FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles:
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.4
Corresponding codec:
SBC, AAC
Transmission range (A2DP):
20 Hz - 20,000 Hz
z2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from
microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
Front/Top
panel
Rear panel
Remote control unit
115
Index
Contents
Connections
Playback
Settings
Tips
o Clock/Alarm/Sleep
Clock type:
Power line frequency synchronized method (Within ±60 seconds per month)
Alarm:
Once alarm/Everyday alarm: One system each
Sleep:
Sleep timer: Max. 90 minutes
o General
Power supply:
AC 230 V, 50/60 Hz
Power consumption:
45 W
Power consumption in standby mode :
0.3 W
Power consumption in “Network Control” –
“On” mode:
3W
0 For purposes of improvement, specifications and design are subject to change without notice.
Front/Top
panel
Rear panel
Remote control unit
116
Index
Appendix
Contents
Connections
Playback
Tips
Settings
o Dimensions
31
160
240
49
Unit : mm
160
4
30
20
90
86
200
20
.
o Weight : 2.3 kg
Front/Top
panel
Rear panel
Remote control unit
117
Index
Appendix
Contents
Connections
Index
Playback
Settings
vD
vA
Accessories ..................................................... 5
Add New Feature ........................................... 78
Add To Favorites ............................................ 39
Adjusting the volume ...................................... 29
Adjusting the tone .......................................... 66
AirPlay ............................................................ 52
Alarm .............................................................. 74
App Store ..................................................... 106
Auto-Standby ................................................. 76
vC
Cables ............................................................ 16
Charging the iPod .......................................... 43
Connecting an iPod ........................................ 21
Connecting a USB memory device ................ 21
Connecting a power cord ............................... 26
Connecting to a home network (LAN) ............ 23
Tips
Appendix
vN
Display’s brightness ....................................... 68
NAS ........................................................ 34, 104
DLNA ........................................................... 106
Network Control ............................................. 79
Network Information ....................................... 79
vF
Favorites list ................................................... 38
vP
Firmware update ............................................ 77
Playing back an iPod ...................................... 40
Friendly Name ................................................ 80
Playing back files stored on PC .............. 34, 104
Front panel ....................................................... 8
Playing a USB memory device ....................... 44
vI
vR
Inputting characters ........................................ 72
Random playback .............................. 36, 42, 45
Inserting the batteries ....................................... 6
Rear panel ...................................................... 11
Internet Radio ................................................. 30
Remote control unit ........................................ 13
iTunes .................................................... 53, 110
Remote play function ..................................... 56
Repeat playback ...................................... 36, 45
vL
Listening to Internet Radio ............................. 31
Listening to music on a Bluetooth device ....... 46
Resetting factory settings ............................. 100
vS
Selecting the input source .............................. 28
vM
Menu map ...................................................... 69
Sleep timer ..................................................... 67
Spotify ............................................................ 55
Supported iPod/iPhone models ...................... 22
Front/Top
panel
Rear panel
Remote control unit
118
Index
Contents
Connections
Playback
Settings
vT
Turning off the sound temporarily (Muting) ..... 29
Turning the power on ..................................... 28
vU
Update on web screen ................................... 63
vV
vTuner ............................................................ 33
vW
Web control function ...................................... 59
Front/Top
panel
Rear panel
Remote control unit
119
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
License
This section describes software license used for this unit.
To maintain the correct content, the original (English) is used.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies
or substantial portions of the Software.
o Boost
http://www.boost.org/
Boost Software License – Version 1.0 – August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization obtaining
a copy of the software and accompanying documentation covered by this license
(the “Software”) to use, reproduce, display, distribute, execute, and transmit the
Software, and to prepare derivative works of the Software, and to permit third-parties
to whom the Software is furnished to do so, all subject to the following:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
The copyright notices in the Software and this entire statement, including the above
license grant, this restriction and the following disclaimer, must be included in all
copies of the Software, in whole or in part, and all derivative works of the Software,
unless such copies or derivative works are solely in the form of machine-executable
object code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR
OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
o FastDelegate
http://www.codeproject.com/KB/cpp/FastDelegate.aspx
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS
CODE PROJECT OPEN LICENSE (“LICENSE”). THE WORK IS PROTECTED BY
COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK
OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS
PROHIBITED.
o Expat
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU
ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE
AUTHOR GRANTS YOU THE RIGHTS CONTAINED HEREIN IN CONSIDERATION
OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS. IF YOU DO NOT
AGREE TO ACCEPT AND BE BOUND BY THE TERMS OF THIS LICENSE, YOU
CANNOT MAKE ANY USE OF THE WORK.
http://www.jclark.com/xml/expat.html
Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center
Ltd
Front/Top
panel
Rear panel
Remote control unit
120
Index
Contents
Connections
Playback
Settings
Any subroutines or modules supplied by You and linked into the Source Code or
Executable Files this Work shall not be considered part of this Work and will not be
subject to the terms of this License.
Patent License. Subject to the terms and conditions of this License, each Author
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
irrevocable (except as stated in this section) patent license to make, have made, use,
import, and otherwise transfer the Work.
Restrictions. The license granted in Section 3 above is expressly made subject to
and limited by the following restrictions: You agree not to remove any of the original
copyright, patent, trademark, and attribution notices and associated disclaimers that
may appear in the Source Code or Executable Files.
You agree not to advertise or in any way imply that this Work is a product of Your
own.
The name of the Author may not be used to endorse or promote products derived
from the Work without the prior written consent of the Author.
You agree not to sell, lease, or rent any part of the Work. This does not restrict you
from including the Work or any part of the Work inside a larger software distribution
that itself is being sold. The Work by itself, though, cannot be sold, leased or rented.
Fair Use/Fair Use Rights. Nothing in this License is intended to reduce, limit, or
restrict any rights arising from fair use, fair dealing, first sale or other limitations on the
exclusive rights of the copyright owner under copyright law or other applicable laws.
License Grant. Subject to the terms and conditions of this License, the Author hereby
grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the
applicable copyright) license to exercise the rights in the Work as stated below: You
may use the standard version of the Source Code or Executable Files in Your own
applications.
You may apply bug fixes, portability fixes and other modifications obtained from the
Public Domain or from the Author. A Work modified in such a way shall still be
considered the standard version and will be subject to this License.
Rear panel
Remote control unit
Appendix
You may otherwise modify Your copy of this Work (excluding the Articles) in any way
to create a Derivative Work, provided that You insert a prominent notice in each
changed file stating how, when and where You changed that file.
You may distribute the standard version of the Executable Files and Source Code or
Derivative Work in aggregate with other (possibly commercial) programs as part of a
larger (possibly commercial) software distribution.
The Articles discussing the Work published in any form by the author may not be
distributed or republished without the Author’s consent. The author retains copyright
to any such Articles. You may use the Executable Files and Source Code pursuant to
this License but you may not repost or republish or otherwise distribute or make
available the Articles, without the prior written consent of the Author.
Definitions. “Articles” means, collectively, all articles written by Author which
describes how the Source Code and Executable Files for the Work may be used by a
user.
“Author” means the individual or entity that offers the Work under the terms of this
License.
“Derivative Work” means a work based upon the Work or upon the Work and other
pre-existing works.
“Executable Files” refer to the executables, binary files, configuration and any
required data files included in the Work.
“Publisher” means the provider of the website, magazine, CD-ROM, DVD or other
medium from or by which the Work is obtained by You.
“Source Code” refers to the collection of source code and configuration files used to
create the Executable Files.
“Standard Version” refers to such a Work if it has not been modified, or has been
modified in accordance with the consent of the Author, such consent being in the full
discretion of the Author.
“Work” refers to the collection of files distributed by the Publisher, including the
Source Code, Executable Files, binaries, data files, documentation, whitepapers and
the Articles.
“You” is you, an individual or entity wishing to use the Work and exercise your rights
under this License.
Front/Top
panel
Tips
121
Index
Contents
Connections
Playback
Settings
Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”,
“WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME
ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT
INFRINGEMENT, SUITABILITY, ETC. AUTHOR EXPRESSLY DISCLAIMS ALL
EXPRESS, IMPLIED OR STATUTORY WARRANTIES OR CONDITIONS,
INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR ANY WARRANTY OF TITLE OR NONINFRINGEMENT, OR THAT THE WORK (OR ANY PORTION THEREOF) IS
CORRECT, USEFUL, BUG-FREE OR FREE OF VIRUSES. YOU MUST PASS THIS
DISCLAIMER ON WHENEVER YOU DISTRIBUTE THE WORK OR DERIVATIVE
WORKS.
Indemnity. You agree to defend, indemnify and hold harmless the Author and the
Publisher from and against any claims, suits, losses, damages, liabilities, costs, and
expenses (including reasonable legal or attorneys’ fees) resulting from or relating to
any use of the Work by You.
Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
LAW, IN NO EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO YOU
ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL,
PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE
USE OF THE WORK OR OTHERWISE, EVEN IF THE AUTHOR OR THE
PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Termination.
Rear panel
Remote control unit
Appendix
This License and the rights granted hereunder will terminate automatically upon any
breach by You of any term of this License. Individuals or entities who have received
Derivative Works from You under this License, however, will not have their licenses
terminated provided such individuals or entities remain in full compliance with those
licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this
License.
If You bring a copyright, trademark, patent or any other infringement claim against
any contributor over infringements You claim are made by the Work, your License
from such contributor to the Work ends automatically.
Subject to the above terms and conditions, this License is perpetual (for the duration
of the applicable copyright in the Work). Notwithstanding the above, the Author
reserves the right to release the Work under different license terms or to stop
distributing the Work at any time; provided, however that any such election will not
serve to withdraw this License (or any other license that has been, or is required to
be, granted under the terms of this License), and this License will continue in full
force and effect unless terminated as stated above.
You may distribute the Executable Files and Source Code only under the terms of
this License, and You must include a copy of, or the Uniform Resource Identifier for,
this License with every copy of the Executable Files or Source Code You distribute
and ensure that anyone receiving such Executable Files and Source Code agrees
that the terms of this License apply to such Executable Files and/or Source Code.
You may not offer or impose any terms on the Work that alter or restrict the terms of
this License or the recipients’ exercise of the rights granted hereunder. You may not
sublicense the Work. You must keep intact all notices that refer to this License and to
the disclaimer of warranties. You may not distribute the Executable Files or Source
Code with any technological measures that control access or use of the Work in a
manner inconsistent with the terms of this License.
You agree not to use the Work for illegal, immoral or improper purposes, or on pages
containing illegal, immoral or improper material. The Work is subject to applicable
export laws. You agree to comply with all such laws and regulations that may apply to
the Work after Your receipt of the Work.
Front/Top
panel
Tips
Publisher. The parties hereby confirm that the Publisher shall not, under any
circumstances, be responsible for and shall not have any liability in respect of the
subject matter of this License. The Publisher makes no warranty whatsoever in
connection with the Work and shall not be liable to You or any party on any legal
theory for any damages whatsoever, including without limitation any general, special,
incidental or consequential damages arising in connection to this license. The
Publisher reserves the right to cease making the Work available to You at any time
without notice
Miscellaneous
This License shall be governed by the laws of the location of the head office of the
Author or if the Author is an individual, the laws of location of the principal place of
residence of the Author.
If any provision of this License is invalid or unenforceable under applicable law, it
shall not affect the validity or enforceability of the remainder of the terms of this
License, and without further action by the parties to this License, such provision shall
be reformed to the minimum extent necessary to make such provision valid and
enforceable.
122
Index
Contents
Connections
Playback
Settings
http://www.xiph.org/vorbis/
Copyright (c) 2002-2004 Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o libogg
http://www.xiph.org/ogg/
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Rear panel
Remote control unit
Appendix
o libvorbis
No term or provision of this License shall be deemed waived and no breach
consented to unless such waiver or consent shall be in writing and signed by the
party to be charged with such waiver or consent.
This License constitutes the entire agreement between the parties with respect to the
Work licensed herein. There are no understandings, agreements or representations
with respect to the Work not specified herein. The Author shall not be bound by any
additional provisions that may appear in any communication from You. This License
may not be modified without the mutual written agreement of the Author and You
Front/Top
panel
Tips
o Tremolo
http://wss.co.uk/pinknoise/tremolo
Copyright (C) 2002 – 2009 Xiph.org Foundation Changes Copyright (C) 2009 – 2010
Robin Watts for Pinknoise Productions Ltd
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
123
Index
Contents
Connections
Playback
Settings
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o Mersenne Twister
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/MT2002/CODES/mt19937ar.c
Copyright (C) 1997 – 2002, Makoto Matsumoto and Takuji Nishimura,
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
The names of its contributors may not be used to endorse or promote products
derived from this software without specific prior written permission.
o Tremor
http://wiki.xiph.org/index.php/Tremor
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
Rear panel
Remote control unit
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Front/Top
panel
Tips
124
Index
Contents
Connections
Playback
Settings
http://curl.haxx.se
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 – 2011, Daniel Stenberg, <[email protected]>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
o zlib
http://www.zlib.net/
zlib.h -- interface of the “zlib” general purpose compression library version 1.2.3, July
18th, 2005
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
Copyright (C) 1995 – 2004 Jean-loup Gailly and Mark Adler
This software is provided “as-is”, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
o c-ares
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
http://c-ares.haxx.se
Copyright 1998 by the Massachusetts Institute of Technology.
The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an acknowledgment
in the product documentation would be appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.
Permission to use, copy, modify, and distribute this software and its documentation
for any purpose and without fee is hereby granted, provided that the above copyright
notice appear in all copies and that both that copyright notice and this permission
notice appear in supporting documentation, and that the name of M.I.T. not be used
in advertising or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the suitability of this
software for any purpose. It is provided “as is” without express or implied warranty.
Jean-loup Gailly [email protected], Mark Adler [email protected]
Rear panel
Remote control unit
Appendix
o cURL
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Front/Top
panel
Tips
125
Index
Contents
Connections
Playback
Settings
o License information for the software used in
the unit
About GPL (GNU-General Public License), LGPL (GNU Lesser
General Public License) License
This product uses GPL/LGPL software and software made by other
companies.
After you purchase this product, you may procure, modify or distribute
the source code of the GPL/LGPL software that is used in the product.
Denon provides the source code based on the GPL and LPGL
licenses at the actual cost upon your request to our customer service
center.
However, note that we make no guarantees concerning the source
code.
Please also understand that we do not offer support for the contents of
the source code.
Front/Top
panel
Rear panel
Remote control unit
126
Index
Tips
Appendix
.
www.denon.com
127
D&M Holdings Inc.
3520 10366 00AD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement