Panasonic LCZ70 PT-50LCZ70, PT-56LCZ70, PT-61LCZ70, PT-50LCZ70-K, PT-56LCZ70-K, PT-61LCZ70-K, LCZ7 PT-50LCZ7, PT-56LCZ7, PT-61LCZ7 Projection Display Operating Instructions

LIFI™ HDTV
Operating Instructions
Models No.
PT-50LCZ70 / PT-56LCZ70 / PT-61LCZ70 /
PT-50LCZ7 / PT-56LCZ7 / PT-61LCZ7 /
PT-50LCZ70-K / PT-56LCZ70-K / PT-61LCZ70-K
ViVA
HD3D Sound
(USA)
Three Important Reasons to Register Your Product Immediately!
For assistance, please call :
1-888-VIEW PTV(843-9788)
1
or, contact us via the web at:
http://www.panasonic.com/contactinfo
(Puerto Rico)
For assistance, please call :
787-750-4300
or visit us at www.panasonic.com
Protect Your New Investment...
Register your new Projection Display for insurance purposes
in case your new Projection Display is stolen.
2 Product safety notification...
Registering your product can help us to contact you in the unlikely event
a safety notification is required under the Consumer Product Safety Act.
3 Improved Product Development...
Help us continue to design products that meet your needs.
Register online at www.panasonic.com/register
(Canada)
For assistance, please call :
1-800-561-5505
or visit us at www.panasonic.ca
ATSC CERTIFIED *
DIGITAL TELEVISION
* The presence of the DTV certification mark indicates that this product will
successfully receive digital television transmissions that conform to any and all of the
video formats described in the ATSC Digital Television Standard.
As an ENERGY STAR® Partner, Panasonic Corporation of North America has
determined that this product or product model meets the ENERGY STAR® guidelines
for energy efficiency.
This operating instruction book is designed for use with models PT-50LCZ70, PT-56LCZ70, PT-61LCZ70,
PT-50LCZ7, PT-56LCZ7, PT-61LCZ7, PT-50LCZ70-K, PT-56LCZ70-K and PT-61LCZ70-K. Illustrations in this
manual show the PT-56LCZ70.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
LSQT1225 A
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
This symbol warns the
user that uninsulated
voltage within the unit may
have sufficient magnitude
to cause electric shock.
Therefore, it is dangerous
to make any kind of
contact with any inside part
of this unit.
This symbol alerts the user
that important literature
concerning the operation
and maintenance of this
unit has been included.
Therefore, it should be read
carefully in order to avoid
any problems.
The pictorial
representation of a hot
surface within a triangle
is intended to tell the
user that parts inside the
product are a risk of burns
to persons.
Note to CATV System Installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
WARNING
To reduce the risk of electric shock, fire, injury to persons or damage to this product:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
2
Read these instructions before using, connecting or adjusting this product.
Keep these instructions for future reference.
Heed all warnings on the product and in this Operating Instructions manual.
Follow all instructions carefully.
Do not use this apparatus near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement or near a swimming pool, and the like. Do not place objects filled with water, such as a vase or the
like, on top of this unit.
Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Openings
in the cabinet are provided for ventilation to ensure reliable operation and to protect it from overheating. Never block
openings by placing the product on a bed, sofa or similar surfaces.
Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produces heat. Do not install in a built-in installation such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING
AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW
CHILDREN TO HANDLE THE SD CARD.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT PLACE OBJECTS FILLED WITH WATER, SUCH AS A VASE OR THE LIKE, ON TOP OF THIS
APPARATUS.
CAUTION
Getting Started
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
(1) This Projection Display is intended to be used with the following TV stand :
model TY-50LC7, TY-56LC7, TY-61LC7, TY-50LC70, TY-56LC70, or TY-61LC70 for the PT-50LCZ70,
PT-56LCZ70, PT-61LCZ70, PT-50LCZ7, PT-56LCZ7, PT-61LCZ7, PT-50LCZ70-K, PT-56LCZ70-K, or
PT-61LCZ70-K. Use with other stands may result in the Projection Display becoming unstable, possibly
causing injury.
(2) This Projection Display should not be exposed to direct sunlight, extreme temperatures or moisture, as this
can result in serious irreparable damage.
– For U.S.A. only –
(3) This Projection Display TV has a Electrodeless Discharge Lamp that contains mercury.
Disposal may be regulated in your community due to environmental considerations.
For disposal or recycling information, please contact your local authorities, or the Electronics Industries
Alliance: <http://www.eiae.org>
Trademarks
• VGA and XGA are trademarks of International Business Machines Corporation.
• Macintosh is a registered trademark of Apple Inc., USA.
• SVGA is a trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
-TV Noise Reduction for true MTS reproduction.
-TV Noise Reduction is required for good stereo separation
• Equipped with
and audio fidelity.
is a registered trademark, and is licensed by
Technology Licensing.
• LIFI™ is a trademark of LUXIM® Corporation.
HDMI, the HDMI logo and High
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.
ViVA
HD3D Sound
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under one or more of
the following US patents: 5510752, 5736897. BBE
and BBE symbol are registered trademarks of BBE
Sound, Inc.
SDHC Logo is a trademark.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
LIFI™ is a trademark of
LUXIM® Corporation.
GalleryPlayer and the GalleryPlayer Logo are
trademarks of GalleryPlayer, Inc.
EZ Sync™ is a trademark of
Matsushita Electric Industrial
Co., Ltd.
HDAVI Control™ is a trademark of
Matsushita Electric Industrial Co., Ltd.
Licensed by Fergason under UPS5717422.
License description: To view the license information for software used in this product, press MENU button and select
“Setup”→“About”→“License”. (p. 55)
Note
• Do not allow a still picture to be displayed for an extended period, as this can cause a permanent afterimage to remain on this unit.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new
Projection Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain
them for future reference.
Retain your purchase receipt also, and record the serial number of your set in the space provided on the rear cover of
these instructions.
Visit our Panasonic Web Site for USA : www.panasonic.com / for Canada : www.panasonic.ca
(USA)
For assistance, please call : 1-888-VIEW PTV(843-9788)
(Puerto Rico)
For assistance, please call : 787-750-4300
(Canada)
For assistance, please call : 1-800-561-5505
or, contact us via the web at: http://www.panasonic.com/contactinfo
or visit us at www.panasonic.com
or visit us at www.panasonic.ca
– For U.S.A. –
FCC STATEMENT:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
ANY CHANGES OR MODIFICATIONS TO THIS PTV RECEIVER NOT EXPRESSLY APPROVED BY PANASONIC
CORPORATION OF NORTH AMERICA COULD CAUSE HARMFUL INTERFERENCE, WHICH WOULD VOID THE
USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.
The ClassⅡ insulation symbol (square within a square) indicates that this product has been evaluated and
tested to comply with ClassⅡ insulation requirements.
Declaration of Conformity
Models Number:
PT-50LCZ70/PT-56LCZ70/PT-61LCZ70/PT-50LCZ7/PT-56LCZ7/PT-61LCZ7
Trade Name:
Panasonic
Responsible party:
Panasonic Corporation of North America
Address:
One Panasonic Way, Secaucus, New Jersey 07094
Telephone number: 1-888-VIEW PTV(843-9788)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CANADIAN NOTICE:
1. Cable Compatible Television Apparatus
2. This Class B digital apparatus complies with Canadian ICES-003.
4
Power ON / OFF .............................................................................. 24
Tuning channels ............................................................................. 26
Projection Display Operation ........................................................ 29
ASPECT Controls ........................................................................... 33
Enjoy
More !
EZ Sync™ Feature .......................................................................... 34
Picture Adjustments....................................................................... 35
Audio Adjustments......................................................................... 38
Sleep Timer Feature ....................................................................... 40
Lock Feature ................................................................................... 41
Viewing from SD Card .................................................................... 46
Setup Features................................................................................ 49
Other
Information !
Operating Peripheral Equipment .................................................. 56
Remote Control Operation/Code List ........................................... 57
Warning Indicators ......................................................................... 61
Troubleshooting ............................................................................. 62
Specifications ................................................................................. 63
Customer Services Directory (for U.S.A.) .................................... 64
Limited Warranty (for U.S.A.) ........................................................ 65
Limited Warranty (for Canada) ...................................................... 66
Index ................................................................................................ 67
Basic Operation
Use
Now !
Advanced Operation
IMPORTANT SAFETY INSTRUCTIONS ..................................... 2
Before Using ..................................................................................... 6
Location of Controls ........................................................................ 9
Installation....................................................................................... 12
Recommended AV Connections ................................................... 21
Information
To
Start !
Getting Started
Table of Contents
5
Before Using
Receiver Location
This Projection Display is intended to be used with an
optional stand or entertainment center. Consult your
dealer for available options.
Situate for comfortable viewing. Avoid placing where
sunlight or other bright light (including reflections) will fall
on the screen.
Use of some types of fluorescent lighting can reduce
Remote Control transmitter range.
Adequate ventilation is essential to prevent internal
component failure. Keep away from areas of excessive
heat or moisture.
Installation Dimensions Diagram
CAUTION
Keep the unit at least 100 mm ( 4˝ ) away from the
wall to provide proper ventilation because warm air
is discharged. Blocking the ventilation opening of
the cooling fan may damage the unit.
100 mm (4˝)
100 mm (4˝)
100 mm
(4˝)
Optional External Equipment
The Video / Audio connection between components can
be made with shielded video and audio cables. For best
performance, video cables should utilize 75 Ω coaxial
shielded cables. Cables are available from your dealer or
electronics store.
Before you purchase any cables, be sure you know
what type of output and input connectors your various
components require. Also determine the length of cable
you’ll need.
Safety Precaution
Please take safety precautions to prevent the unit from
falling over.
WARNING
The unit may tip or fall if not situated on a stable
surface, if pushed or during an earthquake. Use a
strong rope or chain (not included) to fasten the
Projection Display firmly to a strong wall support.
Accessories
1. Remote Control
2. Batteries 2 “AA”
3. Cleaning cloth
(N2QAYB000100)
(LSFQ0003)
Viewing position
To optimize your viewing comfort, please follow the
viewing guidelines shown in the diagrams below.
If viewing for an extended period of time, sit as far back
from the screen as possible.
< Top view >
70º
70º
At least
1.8 m (PT-50LCZ70/PT-50LCZ7/PT-50LCZ70-K) /
2.0 m (PT-56LCZ70/PT-56LCZ7/PT-56LCZ70-K) /
2.2 m (PT-61LCZ70/PT-61LCZ7/PT-61LCZ70-K).
6
Incorrect battery installation can cause the batteries to
leak, leading to personal injury and/or damage to the
Remote Control.
30º
30º
At least
1.8 m (PT-50LCZ70/PT-50LCZ7/PT-50LCZ70-K) /
2.0 m (PT-56LCZ70/PT-56LCZ7/PT-56LCZ70-K) /
2.2 m (PT-61LCZ70/PT-61LCZ7/PT-61LCZ70-K).
Remote Control Battery Installation
Requires two AA batteries (supplied).
1.
While pressing in on the catch, open cover in
direction of arrow.
Observe the following precautions:
1. Always replace batteries with a pair of new ones.
2. Do not combine a new battery with an old one.
3. Do not mix battery types (example: “Zinc Carbon”
with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble,
heat or burn used batteries.
5. Battery replacement is necessary when the Remote
Control acts sporadically or stops operating the
Projection Display set.
Getting Started
CAUTION
< Side view >
Helpful Hints:
(1) Frequent Remote Control users choose
long-lasting Alkaline batteries as replacements.
(2) Whenever batteries are removed, you may need
to reset Remote Control infrared codes.
We suggest making a note of the codes on page 56
prior to setting up the remote.
Reset All Memory Functions
Use when moving unit to a new location, or when First
Time Setup needs to be done over.
2.
Press together the VOL- button
on the unit and MENU button on
the Remote Control for more than
3 seconds.
Install batteries in the battery compartment.
• Battery polarity (+) and (-) must match the markings
inside the compartment.
Selfcheck
Selfcheck in progress.
Please refrain from any
activity. Do not turn off
or unplug the TV.
Two AA size
3.
Press cover until it snaps shut.
After the above message indication
disappeared, unplug the unit then
plug it back in and turn power ON.
Note
• When using “EZ Sync™ “HDAVI Control™””, with the device
connected, set “EZ Sync” first to “Off” and then “On” using the
Setup Menu. (p. 52-53)
7
Before Using (continued)
Cleaning
To ensure continued excellent performance from this
product, periodic cleaning is recommended.
Projection Display
The unit contains many
plastic parts. For this reason
DO NOT use benzine,
thinner or other chemicals
to clean the unit.
DO NOT bring into contact
with insecticide or other
volatile substances. DO
NOT allow the unit to come
into contact for extended
periods with rubber or vinyl
products.
Remove dirt and soiling by
wiping with a light cloth.
Even if the unit is heavily
soiled, do not apply cleaner
directly to the unit. Soak a
cloth in a solution of neutral
cleanser diluted with water.
Then wring out the cloth,
wipe the unit clean, and
finish by wiping with a dry
cloth. Do not use any type
of cleansers on the picture
screen.
Picture Screen
Dust will accumulate on
the picture screen. Please
wipe with a soft cloth from
time to time. If you use a
chemically treated cloth,
please be careful to follow
the instructions that come
with the cloth.
8
Location of Controls
10 FAVORITE
Press to operate the Favorite channel
list function.
11 NUMBER
Press numeric keypad to select any
channel or to make alpha-numeric
entries in menus.
12 R-TUNE
Press to switch to previously viewed
channel or input modes.
1
17
18
2
3
4
5
19
6
20
21
22
23
9
10
24
25
While remote is in DVD mode, press to
skip reverse.
SKIP ►►l
While remote is in DVD mode, press to
skip forward.
SEARCH ◄◄
While remote is in VCR or DVD mode,
press to rewind.
SEARCH ►►
While remote is in VCR or DVD mode,
press to fast forward.
13
7
8
SKIP ◄
l◄
14
15 STOP
While remote is in VCR or DVD mode,
press to stop.
16 PAUSE
While remote is in VCR or DVD mode,
press to pause.
17 EZ Sync
Press to display EZ Sync menu.
18 SAP
In analog mode, press to access
audio modes (Stereo, SAP or Mono).
In digital mode, press to access next
audio track.
19 EXIT
Press to exit menus.
20 SELECT▲▼◄►
Controls navigation around on-screen
menu.
21 OK
Press to select menu and sub-menu
items.
22 RETURN
Press to return one step backward in
menus.
23 VOL –+
Press to adjust TV sound.
24 MUTE
Press to mute sound.
25 RECALL
Press to display or delete Channel
banner.
26 PROG-
Press after entering a digital channel to
enter a sub-channel.
27 TV/VCR
Press to switch to TV or VCR.
28 REC
While remote is in VCR or DVD mode,
press to record.
29 PLAY
While remote is in VCR or DVD mode,
press to play.
11
12
26
13
27
14
28
15
16
29
1 POWER
Press to turn ON and OFF.
2 SD
Press to view from SD Card.
Sets the remote to control television or
digital television.
TV
3
VCR, DBS/CBL, Sets the remote to control other
DVD
devices.
Press to display Main Menu.
5 TV/VIDEO
Changes Input source.
6 SUB MENU
Press to display the Sub Menu.
7 FUNCTION
Press to use for various functions.
8 CH
Press to change channels.
>
<
4 MENU
9 ASPECT
Changes display aspect ratio.
Getting Started
Remote Control
9
Location of Controls (continued)
Controls and Terminals on the Projection Display
Front View <Model PT-56LCZ70 unit shown>
1
2
3
1
POWER
button
Press to turn ON and OFF.
(p. 24, 61, 62)
2
POWER
indicator
Lights up green when power
is ON. (p. 24, 61, 62)
3
LAMP
indicator
Lights up or flashes when the
lamp unit is malfunctioning.
(p. 24, 61)
Open Door:
Press position 1 , and
slide Door open as
shown by arrow.
Remote Control
Sensor
1
2
Door
Close
Open
Close Door:
Press position 2 , and
slide Door closed as
shown by arrow.
1
2
HDMI Input
Terminal 3
Connect from other
component. (HDMI 3)
2
SD CARD Slot Insert SD Card.
3
TV/VIDEO*
Changes Input source.
4
VOL –+*
Press to adjust TV sound.
4
5
6
*
CH
6
Video Input
Connector 3
Connect from other
component. (Video 3)
7
Audio Input
Connector 3
Connect from other
component. (Video 3 / HDMI 3)
* Buttons listed above operate the same as Remote Control buttons of the same name.
10
7
5
<
>
1
3
Press to change channels.
1
Vent
2
34
5
6
7 8
9
10
Getting Started
Rear View <Model PT-56LCZ70 unit shown>
Vent
11 12 13 14 15 16 17
Input terminal for an
antenna or cable box
signal.
1
VHF/UHF Cable In
2
HDMI Input
Connect from other
Audio 1
Terminal 1
component. (HDMI 1)
3
S Video/Video Input Connect from other
Connector 1
component. (Video 1)
4
Video Input
Connector 2
5
HDMI Input Audio/ Connect from other
Terminal 1 Video 1 component. (HDMI 1)
6
HDMI Input Audio/ Connect from other
Terminal 2 Video 2 component. (HDMI 2)
Connect from other
component. (Video 2)
7
Video Out
Connector
Output video signal.
8
DIGITAL AUDIO
OUT
Output audio signal
(Digital)
9
PC (RGB) Input
Connector
Connect from PC. (PC)
10
Audio Input
Connector
Connect from PC. (PC)
11
12
Audio Input
Connector 1
Connect from other
component. (Video 1)
HDMI Input
Connect from other
Audio 2
Terminal 2
component. (HDMI 2)
Audio Input
Connector 2
Connect from other
component. (Video 2)
13
Audio Out
Connector
Output audio signal.
(Analog)
14
Component Video
Input Connector 1
Connect from other
component.
(Component 1)
15
Audio Input
Connector 1
Connect from other
component.
(Component 1)
16
Component Video
Input Connector 2
Connect from other
component.
(Component 2)
17
Audio Input
Connector 2
Connect from other
component.
(Component 2)
Notes
• Make sure the vents are not blocked. (This could cause damage.)
• Indication on the back panel may change without notice.
11
Installation
Connected Equipment Introduction
(Signal source)
■ Watching TV
VHF/UHF Antenna
• NTSC (National Television System Committee): Conventional
broadcasting
• ATSC (Advanced Television Systems Committee): Digital TV
Standards include digital high-definition television (HDTV),
standard-definition television (SDTV), data broadcasting,
multi-channel surround-sound audio and interactive
television.
Cable Box/Cable
• You need to subscribe to a cable TV service to enjoy viewing
their programming.
• You can enjoy high-definition programming by subscribing to
high-definition cable box. The connection can be done with
the use of HDMI or Component Video cable.
■ Enjoying Home theater and DVD recorder with
HDAVI control
Home theater and DVD Recorder
HDMI connection enables you to enjoy higher quality audio and
video with a single cable.
Home Theater
DVD Recorder
■ Enjoying large screen capabilities with PC
connection
You can enjoy playing computer games or making
presentations on a large screen with the PC connection.
PC
or
VHF/UHF Antenna
Cable Box/Cable
■ Recording/playing back with DVD recorder or
VCR
DVD Recorder
This source has higher resolution through interlace or
progressive signal. Connection can be done with the use of
Component Video or HDMI cable.
VCR
Connection can be done with the use of an RF cable and
Composite Video/S VIDEO.
or
DVD Recorder
Notes
• If your Panasonic DVD Recorder is compatible with EZ Sync
(HDAVI control 2), you can operate your Panasonic DVD
Recorder with this Projection Display’s remote control (EZ
Sync™ on page 34).
• All cables and external equipment shown in this book are not
supplied with this Projection Display.
• For the details of the external equipment’s connections,
please refer to the operating manuals for the equipment.
Reference of connection
■ Antenna terminal ■ Pin terminals
VCR
red
blue green
■ Watching Satellite
green
You can enjoy high-definition programming by subscribing to
high-definition satellite source. Connection can be done with
the use of HDMI or Component Video cable.
Satellite Antenna
• Firmly tighten by hand.
■ HDMI terminal
■ S VIDEO terminal
• Insert firmly.
• Insert firmly.
Satellite Receiver
■ PC terminal
• Insert firmly.
12
• Match colors of plugs and terminals.
• Insert firmly.
Connecting Antenna (To watch TV)
Projection Display
VHF/UHF Antenna
Cable
TV
CAUTION
When using “Nut type” RF coaxial cable, tighten with fingers only. Overtightening may damage terminal.
Getting Started
Example 1
To connect antenna terminals
Back of the unit
VHF/UHF Antenna
AC 120 V
60 Hz
Cable TV
or
Power Cord
(Connect after all the
other connections.)
Antenna terminal
(If no Cable Box)
or
ANT OUT
If using Cable Box :
Set the TV channel to CH3 or CH4.
ANT IN
Cable Box
Note
• For additional assistance, visit us at : www.panasonic.com
www.panasonic.ca
13
Installation (continued)
Example 2
Connecting DVD recorder (VCR) (To record/playback)
Projection Display
DVD Recorder
or
VCR
VHF/UHF Antenna
CAUTION
When using “Nut type” RF coaxial cable, tighten with fingers only. Overtightening may damage terminal.
To connect antenna terminals
Back of the unit
VHF/UHF Antenna
AC 120 V
60 Hz
Power Cord
To use HDMI
terminals (next page)
Antenna terminal
To use COMPONENT
terminals (next page)
To use OUTPUT terminals (p. 21, 22)
To use COMPOSITE terminals (next page)
To use S VIDEO terminals (next page)
ANT OUT
ANT IN
DVD Recorder or VCR
(with TV tuner)
14
HDMI
AV OUT
DVD Recorder
High-Definition
• Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound by connecting
this Projection Display and the devices.
■ To use COMPONENT terminals
white
red
white white
red
Getting Started
■ To use HDMI terminals
AUDIO OUT
red
green
green green
blue
red
blue blue
red
COMPONENT
VIDEO OUT
DVD Recorder
red
• Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below.)
■ To use COMPOSITE terminals
yellow
Standard-Definition
white
red
yellow yellow
white
red
white
DVD Recorder
COMPOSITE
OUT
or
VCR
red
■ To use S VIDEO terminals
S VIDEO
OUT
DVD Recorder
or
white
red
• The S Video input will override the composite video
signal when S Video cable is connected. Connect
either S Video or Video cable.
white white
red
AUDIO
OUT
VCR
red
• Connecting to S VIDEO terminals will enable you to enjoy
greater picture quality than using Composite terminals.
Notes
• Some programs contain a copyright protection signal to prevent recording.
• When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed through
VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.
15
Installation (continued)
Example 3
Connecting DVD recorder (VCR) and satellite receiver
Projection Display
DVD Recorder
or
VCR
Satellite
Receiver
VHF/UHF Antenna
CAUTION
When using “Nut type” RF coaxial cable, tighten with fingers only. Overtightening may damage terminal.
To connect antenna terminals
Back of the unit
VHF/UHF Antenna
AC 120 V
60 Hz
Power Cord
Antenna terminal
To use HDMI
terminals
(p. 15)
To use
COMPONENT
terminals
(p. 15)
To use COMPOSITE terminals (p. 15)
To use S VIDEO terminals (p. 15)
ANT OUT
ANT IN
DVD Recorder or VCR
(with TV tuner)
Connecting this Projection Display and DVD recorder (VCR)
Connect in the same way as on page 15.
16
ANT IN
Satellite Receiver
HDMI
AV IN
HDMI
AV OUT
Satellite Receiver
DVD Recorder
• Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound.
■ To use COMPONENT terminals
AUDIO IN
white white
red
red
white white
red
Getting Started
To connect DVD recorder and satellite receiver
■ To use HDMI terminals
AUDIO OUT
red
Satellite Receiver
DVD Recorder
green green
COMPONENT
VIDEO IN
blue blue
red
red
green green
blue
blue
red
red
COMPONENT
VIDEO OUT
• Satellite Receiver may also be connected to COMPOSITE or S VIDEO terminals. (see below.)
To connect VCR and satellite receiver
■ To use COMPOSITE terminals
VCR
yellow yellow
COMPOSITE
IN
white white
red
red
yellow yellow
white
red
white
COMPOSITE
OUT
Satellite Receiver
red
■ To use S VIDEO terminals
S VIDEO
IN
S VIDEO
OUT
Satellite Receiver
VCR
AUDIO
IN
white white
red
red
• The S Video input will override the composite video
signal when S Video cable is connected. Connect
either S Video or Video cable.
white white
red
AUDIO
OUT
red
• Connecting to S VIDEO terminals will enable you to enjoy
greater picture quality than using Composite terminals.
17
Installation (continued)
Example 4
Projection Display
Connecting Home Theater and DVD recorder
Home Theater
DVD Recorder
To connect HDMI terminals
HDMI
AV OUT
Back of the unit
DVD Recorder
AC 120 V
60 Hz
HDMI
AV IN
Power Cord
HDMI
AV OUT
DIGITAL
AUDIO IN
Home Theater
(AV amp)
or
Home theater
(HDMI AV OUT)
Home theater
(DIGITAL AUDIO IN)
When listening to
TV audio
[ATSC only]
Notes
• It is recommended that you use Panasonic’s HDMI cable. (p. 52)
• When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT terminal, refer to page 17 “To use COMPONENT
terminals” or “To use S VIDEO terminals”.
• If you connect RAM theater or Player theater with HDMI cable, use audio cable instead of the optical digital audio cable. (p. 22)
18
Connecting PC
Getting Started
Example 5
PC
Projection Display
To connect PC terminals
Back of the unit
AC 120 V
60 Hz
Power Cord
Conversion adapter
(If necessary)
MONITOR
OUT
RGB cable (D-SUB 15P)
(Not included)
AUDIO
OUT
PC audio cable
(M3 stereo mini pin)
PC
Connect a cable which matches the audio output
terminal on the computer.
PC IN Terminal (D-SUB 15P) Pin Layouts
5
4
10 9
3
2
8
1
7
15 14 13 12 11
Connection port view
6
Pin No.
1
2
3
4
5
6
7
8
Signal name
R
G
B
NC
NC
Ground for R
Ground for G
Ground for B
Pin No.
9
10
11
12
13
14
15
Signal name
NC
Ground
NC
NC
HD/CSYNC
VD
NC
NC: Not connected
Notes
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not
included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible
D-SUB 15P terminal.
• The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied with
this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.
• Select the desired PC input position by pressing the TV/VIDEO button on the Remote Control. (p. 29)
19
Installation (continued)
RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed correctly,
or a black background may be displayed.
Signal data
Personal Computer Signals
Mode type
No. of dots
(H × V)
Horizontal frequency
(kHz)
Vertical frequency
(Hz)
VGA400 (70 Hz)
640 × 400
31.47
70.08
VGA480 (60 Hz)
640 × 480
31.47
59.94
Macintosh 13˝ *
640 × 480
35.00
66.67
VGA480 (75 Hz)
640 × 480
37.50
75.00
SVGA (60 Hz)
800 × 600
37.88
60.32
SVGA (75 Hz)
800 × 600
46.88
75.00
SVGA (85 Hz)
800 × 600
53.67
85.06
Macintosh 16˝ *
832 × 624
49.73
74.55
WVGA (60 Hz)
852 × 480
31.47
59.94
XGA (60 Hz)
1 024 × 768
48.36
60.00
XGA (70 Hz)
1 024 × 768
56.48
70.07
XGA (75 Hz)
1 024 × 768
60.02
75.03
XGA (85 Hz)
1 024 × 768
68.67
85.00
Macintosh 21˝ *
1 152 × 870
68.68
75.06
SXGA (60 Hz)
1 280 × 1 024
63.98
60.02
WXGA (60 Hz)
1 366 × 768
48.39
60.04
Notes
• The D-SUB 15P connector can accept RGB (H-V sync separate).
• The signal with a * mark is compatible with sync on Green.
• To view a WXGA and WVGA picture, a setting change is necessary. Please refer to “PC Adjust” on page 37.
20
These diagrams show our recommendations for how to connect this Projection Display to your various equipment.
For other connections, consult the instructions and the specifications for each piece of equipment. (p. 63)
For additional assistance, please visit our website at: www.panasonic.com
www.panasonic.ca
Back of the unit
Front of the unit
Cable TV
AC 120 V
60 Hz
Cable Box or
or
Power Cord
(Connect after all the
other connections.)
■ DVD Recorder/ VCR
or
Getting Started
Recommended AV Connections
or
SD Card Slot
Or
Or
Or
or
or
or
or
■ To listen to the TV
through speakers
Amplifier
or
or
■ To watch DVDs
DVD Player/Set Top Box
■ To watch PC
■ To watch camcorder
images
Camcorder/VCR/DVD
Player
Notes
• The picture and audio input signals connected to a terminal specified in “Monitor out” (p. 50) cannot be output from “OUTPUT”
terminals. However, audio output can be obtained from “DIGITAL AUDIO OUT” terminal.
• To prevent howling and image oscillation, set the “Monitor out” setting when connecting the VCR with loop-connection. (p. 50)
• When equipment (STB, DVD, etc.) is connected to HDMI or COMPONENT terminals, only audio signals can be obtained. From the
output terminals, no video signals can be passed.
• When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be output through the
OUTPUT terminals.
21
Recommended AV Connections (continued)
EZ Sync™ Connections
Follow the connection diagrams below for HDAVI control
of a single AV piece of equipment such as a Panasonic
DIGA-DVD recorder, RAM theater, or Player theater system.
Refer to pages 52-54 for Setup Menu settings and additional
control information.
• Optional HDMI and/or optical cables are not provided.
If connection (or setting) of equipment compatible with
HDAVI control is changed, switch the power of this unit
Off then On again while the power of all equipment is On
(so that the unit can correctly recognize the connected
equipment) and check that DIGA, RAM theater, and Player
theater playback operate.
Note
• HDMI 1 is recommended. When connecting to HDMI 2 or HDMI 3, set the input mode to HDMI 2 or HDMI 3 (p. 29) initially before
connecting to HDMI 2 or HDMI 3. After connection, confirm the HDMI control functions (p. 52-54).
■ Connecting this unit to a DVD recorder and
■ Connecting this unit to the DIGA, RAM
AV amp
theater, Player theater, or HD Camcorder
• For DIGA : Connect with HDMI cable
• For RAM theater and Player theater :
Connect with the HDMI and audio cables. If audio cable
is not connected, you cannot listen to the TV program
through the theater system.
• For HD Camcorder : Connect with HDMI cable
(HDMI 3 is recommended when connecting to a
Camcorder via HDMI.)
When using an “EZ Sync” audio-video amplifier
and a compatible DIGA recorder, use a daisy chain
connection as shown below.
or
or
HDMI
(AV OUT)
HDMI
(AV IN)
AUDIO
IN
HDMI
(AV OUT)
HDMI
(AV OUT)
HDMI
(AV OUT)
or
Panasonic AV amp DIGA
(Panasonic DVD
Recorder)
Panasonic RAM theater/
Panasonic Player theater
DIGA
(Panasonic DVD
Recorder)
Panasonic HD
Camcorder
• One AV amp and one DIGA recorder can be operated with this unit.
• Be sure to connect the AV amp between this unit and the DIGA recorder.
■ Setting this unit after connections
After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) first to “Off” and then “On” using
the Setup Menu. (p. 52-53)
Notes
• Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating
instruction manuals.
• When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system
switches to 2CH audio. (p. 52-53)
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
22
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by
connecting this Projection Display and the devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a Set Top Box or a DVD player, can be
connected to the HDMI connector using an HDMI compliant (fully wired) cable.
•
•
•
•
HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” menu screen. (p. 39)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(*1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
Getting Started
HDMI connection
Notes
Use with a PC is not assumed.
All signals are reformatted before being displayed on the screen.
If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.
This HDMI connector is “type A”.
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or “VIDEO”
to receive analog signals.
• The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p. Match the output
setting of the digital device.
• For details of the applicable HDMI signals, see below.
•
•
•
•
•
•
About HDMI
HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standards, enhanced
and high definition video formats as well as all existing multichannel audio formats. One jack supports both video and
audio information. The HDMI/HDCP*1 input can be connected to an EIA/CEA 861/861D*2 compliant consumer electronic
device, such as a Set Top Box or DVD player equipped with a HDMI output connection. By inputting a High-bandwidth
Digital Content Protection (HDCP) high definition picture source to the HDMI terminal of this unit, high definition pictures
can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal
computers. This unit is compatible with 1080p, 1080i, 720p, 480p and 480i formats. Select the output of the connected
device to match that of the unit.
*1 HDMI/HDCP = High Definition Multimedia Interface / High-Bandwidth Digital Copy Protection.
*2 EIA/CEA-861/861D Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth
digital content protection.
Input signals that can be displayed
*Mark : Applicable input signal for Component (Y, PB, PR) and HDMI
Horizontal frequency (kHz)
Vertical frequency (Hz)
COMPONENT
HDMI
480i
15.75/15.73
60/59.94
*
*
480p
31.50/31.47
60/59.94
*
*
720p
45.00/44.96
60/59.94
*
*
1080i
33.75/33.72
60/59.94
*
*
1080p
67.50/67.43
60/59.94
*
Notes
• Signals other than those shown above may not be displayed properly.
• The above signals are reformatted for optimal viewing on your display.
23
Power ON / OFF
The Power Indicator
LED
ACTION
Off
Power – OFF
Red (blinking)
Power – OFF (Now cooling)
Green
Power – ON
Green (blinking) Power – ON (Preparing to light lamp)
Notes
• If the POWER button is accidentally turned off during use,
after power is turned back on, it may take a short period
before the lamp automatically comes on.
• This unit consumes approx. 0.4 W in OFF condition when
plugged into an AC outlet.
Power ON
Press POWER on Projection Display or Remote Control
to turn power on.
• The Power Indicator blinks Green for about 10 seconds and
then turns solid Green.
• Picture display may be delayed when the unit has not been
used for a long time or ambient temperature is low.
• The fan rotating sound may be increased in high temperature
condition.
Power OFF
Turning the Power ON and OFF
Always be sure to follow the procedure given below to
turn the Projection Display power ON and OFF.
• The lamp cooling fan will continue to operate for
approximately 30 seconds after the power is turned off.
During this time, the POWER indicator will blink Red.
Do not disconnect the power cord from the outlet
and do not open the circuit breaker (unless
necessary) while the cooling fan is still operating. Do
not disconnect the power cord from the power outlet
while the power indicator blinks Red.
POWER button/
POWER indicator
24
Press POWER on Projection Display or Remote Control
to turn power off.
• Power shuts off after a Black Screen is displayed for about
30 seconds. If the POWER button is pressed during the Black
Screen display, Power is turned back on.
• The Power Indicator blinks Red for about 30 seconds and
then LED turns off.
Note
• When the power cord is disconnected, the internal cooling
fan stops operating. In this case, the lamp will be insufficiently
cooled and will take a while to turn ON again.
Auto shut off
• If “No signal shut-off” has been selected “Set”, the TV will
automatically turn off if NO SIGNAL is present for more
than 10 minutes. (p. 54-55)
• If “No action shut-off” has been selected “Set”, the TV will
automatically turn off if no key has been pressed for more
than 3 hours. (p. 54-55)
5. Press ▲▼ to select “Auto”.
First Time Setup
For your convenience, First Time Setup menu will
be displayed on screen when the set is turned on
for the first time. If needed, follow the menus and
procedures displayed on-screen for setting up the
features.
Language
The language of the on-screen display is set to English
as the factory setting. You can select English, Spanish or
French as the on-screen display language.
6. Press OK to display the Auto program menu.
Program channel
ANT in
Auto
Cable
7. Press ▲▼ to select “All channels”, “Analog
only”, or “Digital only”.
8. Press OK to start scan.
• Channels available for reception will be set automatically.
Auto program
Procedure
1. Press ▲▼ to select “Language”.
2. Press OK to display the Language menu.
First time setup
Auto program
Language
Auto program
Picture
Scanning digital channel
progress
Quit
3. Press ◄► to select “English,” “Español” or
“Français”.
4. Press RETURN to go to previous screen.
Language
Language
English
Auto program
You can scan All (Analog and Digital) channels. If
needed, follow the menus and procedures displayed
on-screen for setting up the features. You can also make
the settings in Setup menu.
40%
9. After Auto program is complete, the unit will
return to Manual program mode. To place
the channels that were located by auto scan
in memory, move the cursor to “Apply” and
press OK. (p. 27-28)
If OK is not pressed after selecting APPLY,
the channels will not be memorized.
Basic Operation
All channels
Analog only
Digital only
10. Press ▲▼ to select “Picture”.
11. Press OK to display the Picture menu. (p. 35)
First time setup
Language
Auto program
Picture
Procedure
1. Press ▲▼ to select “Auto program”.
2. Press OK to display the Program channel
menu.
First time setup
Language
Auto program
Picture
3. Press ▲▼ to select “ANT in”.
4. Press ◄► to select “Cable” or “Antenna”.
Notes
• After “Auto program” is completed the unit tunes to the first
channel found during “Auto program”.
• If setup is incomplete, check connection of Antenna/Cable to
the RF IN Terminal, then try “Auto program” again. (p. 26-27)
• “Auto program” must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
• Depending on conditions, “Auto program” may take a while.
Program channel
ANT in
Auto
Cable
25
Tuning channels
5. Press OK to display the Language menu.
Setup
1/2
Surf mode
All
Language
Program channel
External devices
CC
EZ Sync setting
6. Press ◄► to select “English,” “Español” or
“Français”.
Language
Language
English
7. Press RETURN to go to previous screen.
Automatic program setting
Automatically searches and adds receivable
channels to memory.
Procedure
1. Press MENU to display the Main Menu
screen.
2. Press ▲▼ to select “Setup” icon.
Switching languages for display
3. Press OK to display the Setup menu.
Menu
Allows you to select the language used for
On-Screen Displays.
EZ Sync
Picture
Procedure
Audio
1. Press MENU to display the Main Menu
screen.
Timer
Lock
Memory card
2. Press ▲▼ to select “Setup” icon.
Setup
3. Press OK to display the Setup menu.
Menu
EZ Sync
Picture
5. Press OK to display the Program channel
menu.
Audio
Setup
Timer
Surf mode
Lock
Memory card
Setup
4. Press ▲▼ to select “Language”.
26
4. Press ▲▼ to select “Program channel”.
All
Language
Program channel
External devices
CC
EZ Sync setting
1/2
6. Press ▲▼ to select “ANT in”.
7. Press ◄► to select “Antenna” or “Cable”.
Program channel
Cable
Use this procedure when changing setting of
receiving channels or changing the channel display.
Also, use to add or delete channels from channel list
manually.
Procedure
8. Press ▲▼ to select “Auto”.
1. Press MENU to display the Main Menu
screen.
9. Press OK to display the Auto program menu.
2. Press ▲▼ to select “Setup” icon.
Program channel
ANT in
Auto
Manual
Signal meter
Cable
3. Press OK to display the Setup menu.
Menu
EZ Sync
Basic Operation
ANT in
Auto
Manual
Signal meter
Manual program setting
Picture
Audio
10. Press ▲▼ to select “All channels”, “Analog
only”, or “Digital only”.
Timer
Lock
11. Press OK to start scan.
Memory card
Setup
Auto program
All channels
Analog only
Digital only
4. Press ▲▼ to select “Program channel”.
5. Press OK to display the Program channel
menu.
• If Lock (p. 41) has been set, you must enter your
password to display the Program channel menu.
Auto program
Scanning digital channel
progress
Quit
Setup
40%
12. After Auto program is complete, the unit will
return to Manual program mode. To place
the channels that were located by auto scan
in memory, move the cursor to “Apply” and
press OK. (p. 27-28)
If OK is not pressed after selecting APPLY,
the channels will not be memorized.
Notes
• Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted manually
using the “Manual program setting”. (p. 27-28)
• “Auto program” must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
1/2
Surf mode
All
Language
Program channel
External devices
CC
EZ Sync setting
6. Press ▲▼ to select “Manual”.
7. Press OK to enter the Manual program
screen.
Program channel
ANT in
Auto
Manual
Signal meter
Cable
27
Tuning channels (continued)
8. Press ◄► to select “Edit”.
6. Press ▲▼ to select the character to input/
change.
9. Press OK to enter the edit mode.
Manual program
Edit
Apply
Channel
Caption
Cancel
Favorite
Add
1
...
...
Yes
2
...
...
Yes
3
...
...
Yes
4
...
...
Yes
5
...
...
Yes
6
...
...
Yes
7
...
...
Yes
8
...
...
Yes
OK
Select
RETURN
R Prev. page G Next page B Y
10. Press ▲▼ to select the desired preset
channel line.
11. Press ◄► to select edit area (“Channel,”
“Caption,” “Favorite,” “Add”).
■ Edit (Caption)
1. Press OK to display the Caption select
menu.
2. Press ▲▼ to select “Caption”.
3. Press ◄► to select Broadcast station.
Caption select
10.Press OK to enter the Caption.
■ Edit (Favorite)
1. Press OK to display the Set favorite menu.
(p. 31)
■ Edit (Add)
Setting of register/delete in Program channel.
1. Press OK to select “Yes” or “No”.
Manual program
Edit
Channel
Apply
Caption
...
Yes
2
...
...
Yes
3
...
...
Yes
4
...
...
Yes
5
...
...
Yes
6
...
...
Yes
7
...
...
Yes
8
...
...
Yes
OK
RETURN
R Prev. page G Next page B Y
13. Press OK to enter your program.
1. Press OK to display the Caption select
menu.
2. Press ▲▼ to select “Caption detail”.
3. Press OK to display the Caption detail
menu.
4. Press ▲▼ to select “Caption”.
5. Press OK to enter input field.
Caption detail
--Cancel
Add
...
Cancel
When selecting a desired Caption manually.
Cancel
Favorite
1
Select
5. Press OK to enter the Caption.
28
9. Press ▲▼ to select “Apply”.
---
4. Press ▲▼ to select “Apply”.
Caption
Apply
8. Press OK to enter your selection.
12. Press RETURN to move cursor to “Apply”.
When a preset Caption has been entered.
Caption
Caption detail
Apply
7. Press ◄► to move to the character to
input/change.
Component 1
Component 2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
Video 3
PC
Signal of source connected to COMPONENT
VIDEO INPUT 1 is displayed.
Signal of source connected to COMPONENT
VIDEO INPUT 2 is displayed.
Signal of source connected to HDMI IN 1 is
displayed.
Signal of source connected to HDMI IN 2 is
displayed.
Signal of source connected to HDMI IN 3 is
displayed.
Signal of source connected to VIDEO INPUT
1 is displayed.
Signal of source connected to S VIDEO
INPUT is displayed.
Signal of source connected to VIDEO INPUT
2 is displayed.
Signal of source connected to VIDEO INPUT
3 is displayed.
Signal of source connected to PC IN is
displayed.
Note
• If SKIP is set as the Input Label setting, the mode will not be
changed. (p. 50)
■ Card input mode (Photo viewer) is selected.
Basic Operation
Projection Display Operation
Procedure
1. Press SD to display Photo viewer mode.
Selecting Input Mode
Photo
Signal of source connected to CARD SLOT
(Photo viewer) is displayed.
Procedure
1. Press TV/VIDEO to display the Input select
menu.
2. Press corresponding NUMBER keys to select
the input of your choice. Or, press ▲▼ to
select the input of your choice, then press
OK.
• If, during selection, no action is taken for several seconds,
the Input selection menu is exited and the current input is
automatically selected.
Input select
TV
Component 1
Component 2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
Video 3
PC
Switches between the current and last channel or input
modes.
Procedure
1. Press R-TUNE to switch to previously viewed
channel or input modes.
Note
• When Photo viewer (p. 46) is used, Rapid Tuning is not
available.
Using the CH/VOL Button
■ Select desired channel:
Press CH
or NUMBER keys.
>
<
1
2
3
4
5
6
7
8
9
0
Rapid Tuning
■ Adjust to desired volume level:
Press VOL+ or VOL-.
Notes
• The channel number and volume level are stored even after
the unit is turned off.
• Power consumption can be reduced if the volume level is
lowered.
29
Projection Display operation (continued)
Channel and Program Tuning
Channel Banner: Minimized
Procedure
1. Press CH
to minimize the displayed
channel banner.
>
<
Select analog channel
Press CH
or RECALL, except when the MENU
screen is displayed, to display current unit status
information.
>
<
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub-channels within a single channel. When
tuning to a digital channel, the unit will also tune to a
program and will indicate the channel and program in the
on-screen Channel Banner display.
In order to select channels properly, Auto program must
be performed. (p. 26-27)
Follow the procedure below to directly enter the channel
number using the NUMBER keys.
Unit Status Display
• It will display the channel number, and the station
identification (if available).
Channel Number
Procedure
15-2
ABC-HD
1. Press the NUMBER keys to enter the Channel
number. Press OK.
• The following is an example of tuning to channel 15.
Station Identifier
Direct Tuning Example
Step
1
2
3
Action
Press 1
Press 5
Press OK
Channel Banner Display
1
15
15
Note
Channel, Program and Station identifier
Program title
Andrew’s cooking show
15-2
ABC-HD CC SAP
TV-G
1080i
Select digital channel
Procedure
Closed Caption
1. If tuning a digital channel and your channel
contains more than one program, press
PROG- and enter the program (1, 2, 3 etc.)
using the NUMBER keys. Press OK.
• The following is an example of tuning to channel 15-1.
Direct Tuning Example
Action
Press 1
Press 5
Press PROGPress 1
Press OK
Channel Banner Display
1
15
1515-1
15-1
Note
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
30
Procedure
1. Press RECALL to maximize the displayed
channel banner.
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Step
1
2
3
4
5
Channel Banner: Maximized
Rating Level
Standard
Picture mode
4:3
30
Time remaining
in Sleep Timer
SAP indication Signal resolution Aspect ratio
Audio Mute
Press MUTE to instantly mute the sound. Press again to
restore the previous sound level.
Procedure
1. Press MUTE to mute the sound. Press again
to reactivate sound.
• Sound is also reactivated when power is turned off or
volume level is changed.
Note
• The audio output from AV OUT is not muted.
This menu consists of shortcuts to convenient functions.
Procedure
5. Press FAVORITE repeatedly to change
between pages (1/3, 2/3, 3/3, or exit). Pressing
◄► also changes the page.
Set favorite
1. Press SUB MENU to display the Setup SUB
MENU.
Setup SUB MENU
Surf mode
Set favorite
CC
Caption select
Signal meter
All
Off
Favorite Feature
This feature lets you add channels to or delete channels
from the Favorite channel list.
1
2
3
4
5
6
7
8
9
0
1/3
---------------------
6. Press ▲▼ to highlight a position on the
list. Then, press OK to save the displayed
channel in that position.
• You can also use the NUMBER keys (1-9 and 0) to select
a list number (1-9 and 0). By doing so, the displayed
channel will be saved on that list number without pressing
OK.
Set Favorite Feature
Procedure
Set favorite
1. Display the channel to be placed on the
Favorites list.
2. Press SUB MENU to display the Setup SUB
MENU.
Setup SUB MENU
Surf mode
Set favorite
CC
Caption select
Signal meter
All
Off
1
2
3
4
5
6
7
8
9
0
26-1
-------------------
1/3
---
Basic Operation
Display the SUB MENU
■ To delete a favorite channel
3. Press ▲▼ to select “Set favorite”.
4. Press OK to display the Set favorite menu.
A saved channel can be removed from the list by
holding down OK while its position is highlighted or by
pressing the NUMBER keys.
Setup SUB MENU
Surf mode
Set favorite
CC
Caption select
Signal meter
All
Off
31
Projection Display operation (continued)
Analog mode
Use Favorite Feature
Procedure
Procedure
1. Press FAVORITE.
1. Press SAP button to select the desired audio
mode as described below.
(Arrow shows selection.)
• Press FAVORITE repeatedly to change between pages
(1/3, 2/3, 3/3, or exit). Pressing ◄► also changes the
page.
Favorite channels
1
2
3
4
5
6
7
8
9
0
1/3
• Each press of SAP button will change the audio mode as
shown below.
---------------------
Stereo
SAP
Mono
2. Press ▲▼ or a NUMBER keys (1-9 and 0) to
highlight a channel on the list.
Stereo
• Selecting a channel number from the list with the
NUMBER keys will display the channel directly.
SAP
3. Press OK to display the highlighted channel.
Mono
Select Audio Mode for TV Viewing
■ Receivable Broadcast Types
Digital mode
Procedure
1. Press SAP to select the next audio track (if
available) when receiving a digital channel.
Audio track 1 of 1
The following are possible broadcast types with their
accompanying on-screen displays. The signal being
received is indicated with a red text while the selected
audio mode is a yellow background.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main
language) and Secondary Audio Program (sub
language) broadcasts are both being received
simultaneously. Select the Stereo or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Select Stereo audio mode.
• If stereo broadcast is weak and the display flickers, select
Mono audio mode for possibly better results.
SAP broadcast
Secondary Audio Program (sub language.)
Select SAP audio mode for the sub language.
Mono broadcast
Normal monaural sound broadcast.
32
ASPECT Controls
Mode
Picture
Explanation
9
JUST mode will display a 4:3
picture at maximum size, but
with aspect correction applied
to the center of the screen
so that elongation is only
apparent at the left and right
edges of the screen. The size
of the picture will depend on
the original signal.
3
4:3 mode displays a 4:3
picture at the standard 4:3
size.
9
ZOOM mode magnifies the
central section of the picture.
9
FULL mode displays the
picture at maximum size,
but with a slightly elongated
appearance.
16
JUST
JUST
Changing the Aspect Mode
Lets you choose the aspect mode based on the
format of the received signal and your preference.
Basic Operation
Notes
• When input mode is CARD, the aspect is set to 4:3 and
cannot be changed.
• If the mode selected does not match the aspect ratio of the
input signal, the original picture quality may be affected.
• If using this Projection Display in places, such as cafes or
hotels, with the aim of displaying programs for a commercial
purpose or for public presentation, please note that by using
the aspect ratio (16:9) selection function to change the
aspect ratio, you may be infringing on the rights of the original
copyright owner of that program under copyright protection
laws.
• If a 4:3 picture is projected in wide screen, distortion may
occur around the edges so that part of the picture may no
longer be visible. We recommend viewing in 4:3 mode so you
can enjoy the picture as it was intended to be seen.
4
4:3
4:3
Procedure
1. The aspect mode changes each time ASPECT
is pressed.
16
JUST
FULL
4:3
ZOOM
ZOOM
ZOOM
• When an HD signal (1080p/1080i/720p) is received, the
mode switches between FULL, H-FILL, JUST, and ZOOM.
FULL
H-FILL
16
FULL
ZOOM
JUST
FULL
• During PC input, the mode switches between 4:3 and
FULL only.
4:3
FULL
16
H-FILL
H-FILL
9
H-FILL mode enlarges a 4:3
image horizontally to the sides
of the screen. The side edges
of the image are cut off.
33
EZ Sync™ Feature
EZ Sync™
If you connect equipment that has the “HDAVI Control 2”
function to the TV with HDMI cable, you can enjoy using
this convenient function. For details, “EZ Sync Control”
on pages 22 and 52-54.
Procedure
1. Press ▲▼ to select the equipment.
DVD recorder
Home theater
HD camcorder
Speaker output
TV
2. Press OK to operate the selected equipment
with this Projection Display’s Remote
Control.
• Follow the menu of the equipment and enjoy watching.
• For the remote control operations, refer to page 54.
■ Return to TV screen
Press EXIT.
Note
• For details, see the equipment manual or ask your local
dealer.
Press MENU to display the Main Menu screen.
Press to select “EZ Sync”.
Press to display the EZ
Sync menu.
Menu
EZ Sync
Picture
Audio
Timer
Lock
Memory card
Setup
• The EZ Sync may be set using the EZ Sync button.
• While Main Menu (only) is displayed, pressing MENU
will exit the menu screen.
■ Return to previous level menu.
Press RETURN to return to previous level menu.
■ Return to normal picture.
Press EXIT to exit menu.
34
Picture Adjustments
Normal / Lamp / Picture / Brightness /
Color / Tint / Sharpness / Color temp. /
Color mgmt. / AI picture
Procedure
1. Press ▲▼ to select each item.
2. Press ◄► to adjust each item.
Picture
1/2
No
Vivid
0
+30
0
0
0
+17
Picture
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
2/2
Warm
On
Off
Press MENU to display the Main Menu screen.
Press to select “Picture”
icon.
Press to display the Picture
menu.
Menu
EZ Sync
Item
Normal
Lamp
Adjusts luminance of the lamp.
Picture
Adjusts white areas of picture.
Brightness
Adjusts dark areas of picture.
Color
Adjusts desired color intensity.
Tint
Adjusts natural flesh tones.
Sharpness
Adjusts clarity of outline detail.
Color temp.
(Color temperature)
To increase or decrease Warm (red)
and Cool (blue) colors to suit personal
preferences.
Color mgmt.
(Color management)
Enhances green and blue color
reproduction, especially outdoor scenes.
AI picture
Controls dark areas without affecting the
black level or brightness in the overall
picture.
Picture
Audio
Timer
Lock
Memory card
Setup
Explanations
Resets all picture adjustments to factory
default settings.
Advanced Operation
Normal
Picture mode
Lamp
Picture
Brightness
Color
Tint
Sharpness
• While Main Menu (only) is displayed, pressing MENU
will exit the menu screen.
■ Return to previous level menu.
Press RETURN to return to previous level menu.
■ Return to normal picture.
Press EXIT to exit menu.
35
Picture Adjustments (continued)
5. Press ▲▼ to select each item.
Picture Mode
Lets you choose one of four preset Picture Modes that
best suits the program that you are viewing. Selecting
this feature will also affect Color Temperature setting.
6. Press ◄► to adjust each item.
Pro setting
Normal
AI brightness
Black extension
W/B high R
W/B high B
W/B low R
W/B low B
Procedure
1. Press ▲▼ to select “Picture mode”.
2. Press ◄► to select picture mode.
Picture
Normal
Picture mode
Lamp
Picture
Brightness
Color
Tint
Sharpness
1/2
No
Vivid
Item
0
+30
0
0
0
+17
AI
brightness
Black
extension
W/B high R
Adjusts the W/B high R (red).
W/B high B
Adjusts the W/B high B (blue).
W/B low R
Adjusts the W/B low R (red).
W/B low B
Adjusts the W/B low B (blue).
Zoom Adjust
Adjust the vertical image position and size.
It works when Aspect mode is Zoom.
Procedure
Pro Setting
1. Press ▲▼ to select “Zoom adjust”.
Highly-detailed adjustments can be made.
2. Press OK to display the Zoom adjust menu.
Procedure
Picture
1. Press ▲▼ to select “Picture mode”.
2. Press ◄► to select “Custom”.
Picture TV
Normal
Picture mode
Lamp
Picture
Brightness
Color
Tint
Sharpness
Picture TV
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
1/2
No
Custom
0
+30
0
0
0
+17
4. Press ◄► to adjust the vertical size.
• Press OK to reset the aspect ratio.
2/2
Warm
On
Off
2/2
Warm
On
Off
3. Press ▲▼ to adjust the vertical position.
Note
3. Press ▲▼ to select “Pro setting”.
4. Press OK to display the Pro setting menu.
36
0
0
0
0
0
Explanations
Resets all picture adjustments to factory default
settings.
The median brightness level of the picture can be
set.
You can adjust the gray level of black for areas of
the screen that are darker than the median level.
Normal
• Vivid (default) - Provides enhanced picture contrast and
sharpness for viewing in a well-lit room.
• Standard - Recommended for normal viewing conditions with
subdued room lighting.
• Cinema - For watching movies in a darkened room. It
provides a soft, film-like picture.
• Custom (Photo) - Customizes each item according to your
taste.
Photo is displayed in JPEG menu.
Set
Mid
Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may
not be available.
PC Adjust
Other Adjust
You can adjust the picture when “Input select” is selected
to “PC”. (p. 29)
Procedure
Procedure
1. Press ▲▼ to select “PC adjust”.
2. Press OK to display the PC adjust menu.
Picture
1. Press ▲▼ to select “Other adjust”.
2/2
Warm
On
Off
3. Press ▲▼ to select each item.
4. Press ◄► to adjust each item.
Item
Normal
Picture
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
2/2
Warm
On
Off
3. Press ▲▼ to select each item.
4. Press ◄► to adjust each item.
PC adjust
Normal
Sync
Dot clock
H-position
V-position
Clock phase
Input resolution
H-frequency
V-frequency
2. Press OK to display the Other adjust menu.
No
H&V
-3
0
0
0
VGA
31.4kHz
60.0Hz
Explanations
Resets all picture adjustments to factory default
settings.
Sync
• H&V : The H and V sync signals are input from
the HD/VD connector.
• On G : Uses a synchronized signal on the Video
G signal, which is input from the G connector.
Dot clock
Adjusts horizontal size.
H-Position
Adjusts horizontal position.
V-Position
Adjusts vertical position
Clock phase
Adjusts in order to remove any picture
interference or contour blurring which may occur
in computer images.
Input
resolution
Switches to wide display.
Input signal switched from XGA to WXGA and
from VGA to WVGA.
Displays the frequencies of the PC signal
currently being adjusted.
H-Frequency/ Displays the H (Horizontal) / V (Vertical)
V-Frequency frequencies.
Display range: Horizontal 15-110 kHz
Vertical
48 - 120 Hz
Note
• This function is available only when the signal being viewed
is from a PC.
Other adjust
Video NR
3D Y/C filter
Color matrix
Block NR
Mosquito NR
Black level
3:2 pulldown
Item
Video NR
3D Y/C filter
Color matrix
On
On
SD
On
On
Dark
On
Explanations
Reduces noise, commonly called snow. Leave off
when receiving a strong signal.
Minimizes noise and cross-color in the picture.
Select SD or HD.
• SD : Color matrix is set same as a normal TV
system (NTSC).
• HD : Color matrix is set same as a
High-Definition system (ATSC).
With a 480p signal from equipment connected
to COMPONENT VIDEO INPUT (Y, PB, PR) or
HDMI INPUT terminals or from the unit’s DTV
tuner, you can select SD or HD color matrix to
display the most natural color.
Advanced Operation
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
Other detailed picture adjustments can be made.
This function is not available when “Input select” is
selected to “PC”. (p. 29)
Notes
• This feature is available only with 480p signals.
• The default setting with HDTV signals (720p,
1080i or 1080p) is HD color matrix.
• The default setting with NTSC signals (480i) is
SD color matrix.
Reduces noise of specific digital signals of DVD,
STB, etc.
Reduces HDTV flicker noise in the contoured
Mosquito NR
sections of an image.
Select Light or Dark [Dark : VIDEO, Light :
Black level
480i/480p/720p/1080i/1080p] Invalid for Digital
channel, Analog channel, PC and Photo viewer.
3:2 pulldown Transfers film to video.
Block NR
37
Audio Adjustments
Normal / Bass / Treble / Balance
Procedure
1. Press ▲▼ to select each item.
2. Press ◄► to adjust each item.
Audio
Normal
Bass
Treble
Balance
Other adjust
Item
No
0
0
0
Explanations
Normal
Reset Bass, Treble and Balance
adjustments to factory default settings.
Bass
Increase or decrease the bass response.
Treble
Increase or decrease the treble response.
Balance
Emphasize the left / right speaker volume.
Other Adjust
Other detailed audio adjustments can be made.
Procedure
1. Press ▲▼ to select “Other adjust”.
Press MENU to display the Main Menu screen.
Press to select “Audio” icon.
Press to display the Audio
menu.
Menu
EZ Sync
Picture
Audio
Timer
Lock
Memory card
Setup
• While Main Menu (only) is displayed, pressing MENU
will exit the menu screen.
■ Return to previous level menu.
Press RETURN to return to previous level menu.
■ Return to normal picture.
Press EXIT to exit menu.
38
2. Press OK to display the Other adjust menu.
Audio
Normal
Bass
Treble
Balance
Other adjust
No
0
0
0
3. Press ▲▼ to select each item.
4. Press ◄► to adjust each item.
Other adjust
1/2
On
On
On
3D
On
Analog
Auto
Auto
AI sound
BBE VIVA 3D
BBE
Surround
Speaker output
HDMI 1 in
HDMI 2 in
HDMI 3 in
Other adjust
Audio leveler
2/2
0
Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may
not be available.
Explanations
AI sound
Equalize overall volume levels across all channels.
BBE VIVA
3D
BBE ViVA HD3D (High-Definition 3D) Sound
provides musically accurate natural 3D image with
Hi-Fi sound. The clarity of the sound is improved
by BBE while the width, depth and height of
sound image are expanded by BBE’s proprietary
3D sound process. BBE ViVA HD3D Sound is
compatible with all TV programs including news,
music, dramas, movies, sports and electronic
games.
BBE
BBE High Definition Sound restores clarity and
presence for better speech intelligibility and musical
realism.
• “BBE” is not available when “BBE VIVA 3D” is set
to “On”.
Surround
Enhances audio response when listening to stereo.
• “Surround” is not available when “BBE VIVA 3D”
is set to “On”.
Speaker
output
Switches to “Off” when using external speakers.
• “AI sound”, “Surround” and “Audio leveler” do not
work if “Off” is selected.
HDMI 1 in/
HDMI 2 in/
HDMI 3 in
Perform input switching of analog audio input and
digital audio input when using the HDMI terminal.
Auto :
Automatically performs digital/analog
input switching according to the input
signal type.
Digital :
Forces use of digital audio input signal
transmitted via the HDMI terminal.
Analog : Forces use of analog audio input signal
transmitted via separate RCA terminals.
• This item can be selected when viewing a signal
from a HDMI.
Audio
leveler
The audio leveler monitors the difference in
audio levels between input signals from external
equipment and minimizes the change in output
volume that could occur when switching input
signals.
Notes
• “BBE VIVA 3D”, “BBE”, and “Audio leveler” do not work when
“Speaker output” is set to “Off”.
• Sound signals are output from the rear AUDIO OUT and
DIGITAL AUDIO OUT terminal. (p. 21)
• When volume is adjusted or the MUTE button is pressed from
the Remote Control, a message will be displayed.
Advanced Operation
Item
39
Sleep Timer Feature
Set Sleep Timer
Press to set unit to shut itself off after a preselected
amount of time.
Procedure
1. Press ◄► to select “0,” “30,” “60,” or “90”.
Timer
Sleep
60
Notes
• Pressing the RECALL button with sleep timer set displays
remaining time.
• The on-screen display will flash 3, 2 and 1 to indicate the last
three (3) remaining minutes prior to turn off.
Press MENU to display the Main Menu screen.
Press to select “Timer” icon.
Press to display the Timer
menu.
Menu
EZ Sync
Picture
Audio
Timer
Lock
Memory card
Setup
• While Main Menu (only) is displayed, pressing MENU
will exit the menu screen.
■ Return to previous level menu.
Press RETURN to return to previous level menu.
■ Return to normal picture.
Press EXIT to exit menu.
40
Lock Feature
This Projection Display incorporates V-CHIP technology
to block the viewing of movies and television programs
according to the rating category. There are four (4)
Content Advisory Categories: MPAA (Motion Picture
Association of America), TV Parental Guidelines
Ratings, Canadian English Language Ratings and
Canadian French Language Ratings. These categories
are used as guidelines for blocking the programs. The
default mode for the Lock category is the Unlocked
state. In this state, you can surf the various categories
of the Lock menu. After you have created a password,
you are prompted to enter it before you can make any
changes in the Lock menu.
• This Projection Display is designed to support the
“Downloadable U.S. Region Rating System” when available.
(Available only in U.S.A.)
Enter Password
A 4-digit password must be entered to view a blocked
program or change rating settings.
■ Create Password
Procedure
1. Press NUMBER keys to enter your password.
Create password
Enter password.
Press MENU to display the Main Menu screen.
0 - 9
Create password
Press to select “Lock” icon.
Confirm password.
---0 - 9
Create password
Press to display the options
in the Lock menu.
Succeeded.
****
Menu
EZ Sync
Picture
Audio
0 - 9
2. Upon entering the 4 digit code, the Lock
menu is displayed.
Lock
Timer
Mode
Channel
Game
Program
Change password
Lock
Memory card
Setup
• You will be asked to enter your password each time
you display the Lock menu.
• While Main Menu (only) is displayed, pressing MENU
will exit the menu screen.
■ Return to previous level menu.
Press RETURN to return to previous level menu.
■ Return to normal picture.
Advanced Operation
----
Off
Off
Off
Off
Note
• Use a password that is easy to remember and record it in a
safe place.
Press EXIT to exit menu.
41
Lock Feature (continued)
■ Enter Password
Procedure
1. Press NUMBER keys to enter your password.
Password
Enter password.
----
Channel Lock (Block channel
selection)
Select up to 7 (1-7) channels to be blocked out. These
channels will be blocked out regardless of the program
rating.
Procedure
0 - 9
2. Upon entering the 4 digit code, the Lock
menu is displayed.
1. Press ▲▼ to select “Channel”.
2. Press OK to display the Channel lock menu.
Lock
Mode
Channel
Game
Program
Change password
Notes
• Once ratings are set, restricted tapes or programs cannot be
accessed unless the secret password is entered.
• Do not forget your password. If you have forgotten it,
please contact service center.
3. Press ▲▼ to select “Mode”.
Lock Set
4. Press ◄► to select “Custom”.
Select Lock mode to prevent viewing of video games,
VCR tapes, channels and Video modes.
Procedure
• All - Locks all channels.
• Off - Unlocks all channels.
Channel lock
1. Press ▲▼ to select “Mode”.
2. Press ◄► to select the desired setting.
Lock
Mode
Channel
Game
Program
Change password
Custom
Off
Off
Off
To prevent video games, VCR tapes and all channels
and video modes from being viewed. The available
modes are:
• Off - Unlocks all the lock settings of “Channel”, “Game” and
“Program”.
• All - Locks all the inputs regardless of the lock setting of
“Channel”, “Game” and “Program”.
• Custom - Locks specified inputs of “Channel”, ”Game” and
“Program”.
• “Channel”, ”Game” and “Program” will grey out unless
“Custom” is selected in “Mode”.
42
Custom
Off
Off
Off
Mode
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Custom
14-1
-------------
5. Press ▲▼ to select Channel 1 - 7.
6. Press ◄► to select the desired Block
channel.
Channel lock
Mode
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Custom
14-1
-------------
6. Press OK to display the program lock menu.
Game Lock
• MPAA : for U.S movie ratings
• U.S.TV : for U.S TV program ratings
• C.E.L.R. : for Canadian English ratings
• C.F.L.R. : for Canadian French ratings
Locks Channel 3, Channel 4 and external inputs.
Procedure
1. Press ▲▼ to select “Game”.
Program lock
2. Press ◄► to select “On” or “Off”.
Mode
Monitor out
MPAA
U.S.TV
C.E.L.R
C.F.L.R
• On - Locks
• Off - Unlocks
Lock
Mode
Channel
Game
Program
Change password
Custom
Off
Off
Off
On
Off
Off
Off
Off
Off
7. Press ▲▼◄► to highlight the desired rating
level.
Monitor out setting
This television incorporates V-Chip technology to block
the viewing of movies and television programs according
to the rating category. There are four (4) Content
Advisory Categories: MPAA (Motion Picture Association
of America), U.S.TV Program, Canadian English ratings
and Canadian French ratings. These categories are used
as guidelines for blocking programs.
Procedure
1. Press ▲▼ to select “Program”.
2. Press OK to display the Program lock menu.
Lock
Mode
Channel
Game
Program
Change password
• The default mode for the Lock category is the Unlocked state.
Rating level setting
Procedure
3. Press ▲▼ to select “Monitor out”.
1. Press ▲▼ to select “Program”.
2. Press OK to display the Program lock menu.
Lock
Mode
Channel
Game
Program
Change password
Custom
Off
Off
Off
Custom
Off
Off
Off
4. Press ◄► to select “On” or “Off”.
• On - Turns on the monitor terminal output for programs
that have been set to “Blocked.”
• Off - Turns off the monitor terminal output for programs
that have been set to “Blocked.”
Program lock
Mode
Monitor out
MPAA
U.S.TV
C.E.L.R
C.F.L.R
3. Press ▲▼ to select “Mode”.
4. Press ◄► to select “On”.
On
On
Off
Off
Off
Off
Advanced Operation
Block program
Program lock
Mode
Monitor out
MPAA
U.S.TV
C.E.L.R
C.F.L.R
On
Off
Off
Off
Off
Off
Notes
• The Off rating is independent of other ratings.
• When placing a block on a specific age based rating level,
the Off rating and any other more restrictive ratings will also
be blocked.
5. Press ▲▼ to select “MPAA”, “U.S.TV”,
“C.E.L.R.” or “C.F.L.R.”.
43
Lock Feature (continued)
U.S. MOVIES RATINGS CHART
(MPAA)
Off
NO RATING (NOT RATED) AND NA (NOT
APPLICABLE) PROGRAMS. Movie has not been
rated or rating does not apply.
G
GENERAL AUDIENCES. All ages admitted.
PG
PG-13
R
NC-17
X
Agebased
Group
TV-G
PARENTS STRONGLY CAUTIONED. Some material
may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying
parent or adult guardian.
Agebased
Ratings
NR
(Not Rated)
TV-NR
TV-Y
Blocked
Content
Selections
• Viewable
• Blocked
Not Rated. See “Customer
Caution” on page 45.
• Viewable
• Blocked
All children. The themes and
elements in this program
are specifically designed
for a very young audience,
including children from ages
2-6.
Youth
TV-Y7
Description
• FV
(Fantasy
Violence)
• Viewable
• Blocked
Directed to older children.
Themes and elements in
this program may include
mild physical or comedic
violence, or may frighten
children under the age of 7.
FV :
V:
S:
L:
D:
Description
General audience. It
contains little or no violence,
no strong language, and
little or no sexual dialogue
or situations.
Parental guidance
suggested. The program
may contain infrequent
coarse language, limited
violence, some suggestive
sexual dialogue and
situations.
• D,L,S,V (all
selected)
• Any
combination
of D, L, S, V
Parents strongly cautioned.
This program may contain
sophisticated themes,
sexual content, strong
language and more intense
violence.
• L,S,V (all
selected)
TV-MA • Any
combination
of L, S, V
Mature audiences only.
This program may contain
mature themes, profane
language, graphic violence,
and explicit sexual content.
TV-14
ADULTS ONLY.
Agebased
Group
• Viewable
• Blocked
Guidance
NO ONE 17 AND UNDER ADMITTED.
The TV Parental Guidelines has 7 levels of age-based
ratings that can be selected. These 7 levels are split into
2 age-based groups:
Youth Age-based Ratings and Guidance Age-based
Ratings. Some of these age-based ratings can also
have content-based ratings, denoted as D (Dialog), L
(Language), S (Sex) and V (Violence). The table below
shows the age-based ratings selection.
Blocked
Content
Selections
• D,L,S,V (all
selected)
TV-PG • Any
combination
of D, L, S, V
PARENTAL GUIDANCE SUGGESTED. Some
material may not be suitable for children.
U.S. TV PROGRAMS RATINGS
CHART
44
Agebased
Ratings
Fantasy/Cartoon Violence.
Violence
Sex
Offensive Language
Dialogue with sexual content.
CANADIAN ENGLISH RATINGS
CHART
E
Exempt - Exempt programming includes: news, sports,
documentaries and other information programming, talk
shows, music videos, and variety programming.
C
Programming intended for children under age 8. No
offensive language, nudity or sexual content.
C8+
G
Programming generally considered acceptable for
children 8 years and over. No profanity, nudity or sexual
content.
General programming, suitable for all audiences.
PG
Parental Guidance suggested. Some material may not
be suitable for children.
14+
Programming contains themes or content which may not
be suitable for viewers under the age of 14. Parents are
strongly cautioned to exercise discretion in permitting
viewing by pre-teens and early teens.
18+
18+ years old. Programming restricted to adults.
Contains constant violence or scenes of extreme
violence.
CANADIAN FRENCH RATINGS
CHART
E
Exempt - Exempt programming.
G
General - Programming intended for audience of all
ages. Contains no violence, or the violence content is
minimal or is depicted appropriately.
8 ans +
8+ General - Not recommended for young children.
Programming intended for a broad audience but
contains light or occasional violence. Adult supervision
recommended.
Programming may not be suitable for children under
the age of 13 - Contains either a few violent scenes or
13 ans +
one or more sufficiently violent scenes to affect them.
Adult supervision strongly suggested.
Programming may not be suitable for children under
16 ans + the age of 16 - Contains frequent scenes of violence or
intense violence.
18 ans +
Change password
Procedure
1. Press ▲▼ to select “Change password”.
2. Press OK to display the Input Password
screen.
Lock
Mode
Channel
Game
Program
Change password
Custom
Off
Off
Off
3. Press the NUMBER keys to change a 4-digit
password to enter the Lock menu.
Enter a 4-digit password.
Change password
Enter password.
Programming restricted to adults. Contains constant
violence or scenes of extreme violence.
---0 - 9
Change password
Customer Caution
The V-Chip system that is used in this set is capable of blocking
“NR” programs (non rated, not applicable and none) as per
FCC Rules Section15.120(e)(2). If the option of blocking “NR”
programs is chosen “unexpected and possibly confusing results
may occur, and you may not receive emergency bulletins or any
of the following types of programming:”
• Emergency Bulletins (Such as EAS messages, weather
warnings and others)
• Locally originated programming • News • Political • Public
Service Announcements • Religious • Sports
• Weather
Confirm password.
----
Change password
Succeeded.
****
0 - 9
Notes
Blocking Messages
Various Blocking messages are displayed on-screen
depending upon the type of blocking you have selected
in the Lock menu.
• Use a code that is easy to remember and record it in a safe
place.
• Do not forget your password. If you have forgotten it,
please contact service center.
Advanced Operation
0 - 9
Note
• Entering the password will override the block condition.
However, the ratings selection will be retained.
Message
Possible cause
Game
locked.
The TV/VIDEO button was pressed when the Game
lock had been selected.
Channel
Locked.
Tuned to the designated channel when the Channel
lock had been selected.
All locked.
Program
locked.
Tuned to CH 3 or CH 4 when the Game lock had
been selected. Lock all is selected.
Received program that exceeds the Block Program
rating level.
45
Viewing from SD Card
Still image data (JPEG) made with a digital camera or
digital video camera can be played back using an SD
Card.
WARNING
As with any small objects, SD cards can be
swallowed by young children. Do not allow children
to handle the SD card.
CAUTION
1.
2.
Always insert card in the correct direction. Failure to
do so may result in damage to the card and this unit.
The SD Card is precision devices. Do not subject
them to excessive pressure or strong impacts.
Notes
• Compliant card type (maximum capacity): SDHC Card
(4 GB), SD Card (2 GB), mini SD Card (1 GB) (requiring mini
SD Card adapter).
• Remove the Card carefully to prevent it from popping out of
the slot too fast.
Insert the Card
With the SD logo facing upward, insert the Card
horizontally into the SD Card Slot. The card is secured
when you hear a click.
Front Card Slot (p. 10)
Cautions in handling SD Card:
• Do not remove the card while the unit is accessing data
(this can damage card or unit).
• Do not touch the terminals on the back of the card.
• Do not subject the card to a high pressure or impact.
• Insert the card in the correct direction (otherwise, card
may be damaged).
• Electrical interference, static electricity, or erroneous
operation may damage the data or card.
• Back up the recorded data at regular intervals in case
of deteriorated or damaged data or erratic operation of
the unit. (Panasonic is not liable for any deterioration or
damage of recorded data.)
SD Card
Remove the Card
Gently press in on the Card and release slowly. Pull the
Card from the slot.
Front Card Slot (p. 10)
Press in lightly on SD Card,
then release.
■ Data Format for Card Browsing
Photo:
Still images recorded with digital still
cameras compatible with JPEG files of
DCF* and EXIF** standards
Data format:
Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2
or 4:2:0)
Max. number of files: 9,999
Image resolution:
160 × 120 to 10,000,000
* DCF (Design rule for camera file system): A Japan
Electronics and Information Technology Industries
Association’s standard
** EXIF (Exchangeable Image File Format)
Notes
If there is a problem with the card or card data, the
following messages will appear.
■ SD Card warning messages
Message
Insert/Remove the Card
CAUTION
Do not remove the SD card while “Accessing” is
being displayed on screen. Otherwise, data may be
lost or corrupted.
Description
Is memory card in? • The card is not inserted.
No file
Cannot read file
• Some parts of an image may not be displayed, or the image
may be displayed on a smaller scale depending on the size of
the image.
• Only JPEG images can be displayed on this unit.
• A JPEG image modified with a PC may not be displayed.
46
Card Warning Messages
• The card has no data, or this type of data
is not supported.
• The file is broken or unreadable.
• This Projection Display does not support
the format.
■ GalleryPlayer warning messages (p. 48)
Message
Description
• There is a problem with the unit decoder.
• If this message appears, please contact
Cannot display
Panasonic Service Center for assistance.
image due to
Refer to page 64 (Customer Services
incorrect ID data.
Directory (for U.S.A.)), page 65 or 66
(Limited Warranty (for U.S.A. or for
Canada))
Cannot display
• There is a problem with the data.
image on SD card.
Check the data inside the SD card.
Photo viewer Mode
The screen below is displayed automatically while a card
is inserted.
Photo viewer
1
12
Total
Information
2
No.
101-0365
101-0366
101-0367
101-0368
101-0369
101-0370
101-0371
101-0372
101-0373
101-0374
101-0375
101-0376
101-0365
Date
01/01/2007
Pixel
1600×1200
4
Accessing
3
Select
OK
RETURN
R Slide show G B Y
1
Total
Total number of images.
Information
2
Selected picture information is displayed.
No. : Image number or file name is displayed.
Date : Date of recording is displayed.
Pixel : Display resolution is displayed.
Note
• Depending on the JPEG format, “Info” contents may not be
displayed correctly. Refer to page 46 (Data format for SD
card browsing) for details.
■ Single Play Mode
Press MENU to display the Main Menu screen.
Press to select “Memory
card” icon.
Present status
While reading the data.
Accessing
Rotate
Prev.
Next
RETURN
R Slide show G B Y
3
Press the R button : to Slide Show Mode
■ Slide Show Mode
Press to display the Photo
viewer.
Present status
While reading the data.
Accessing
Pause
Next
RETURN
Prev.
R G Single
Menu
B Y
Press the G button : to Single Play Mode
EZ Sync
Index Area
Picture
Advanced Operation
Navigation Area
Press to select file.
Audio
Timer
Lock
Memory card
Setup
Press to display full size file
preview. (See Next Page.)
4
Photo viewer
12
Total
Information
No.
• The SD button may also be pressed for Photo viewer
mode. (p. 29)
• While Main Menu (only) is displayed, pressing MENU
will exit the menu screen.
■ Return to previous level menu.
Press RETURN to return to previous level menu.
■ Return to normal picture.
Press EXIT to exit menu.
101-0365
101-0366
101-0367
101-0368
101-0369
101-0370
101-0371
101-0372
101-0373
101-0374
101-0375
101-0376
101-0365
Date
01/01/2007
Pixel
1600×1200
Accessing
Accessing
Select
OK
RETURN
R Slide show G B Y
Rotate
Prev.
Next
RETURN
R Slide show G B Y
■ Exit Photo viewer
Press EXIT.
■ Return to the previous screen
Press RETURN.
47
Viewing from SD Card (continued)
3. Press OK to display the JPEG setup menu.
Single Play Mode
JPEG setup
Disp. time
Repeat
4. Press ▲▼ to select each item.
Accessing
Rotate
Prev.
5
On
5. Press ◄► to set each item.
Next
RETURN
R Slide show G B Y
Displays one at a time
Navigation Area
Rotate 90 degrees (counter-clockwise).
The next image is displayed.
Rotate 90 degrees (clockwise).
The previous image is displayed.
Disp. time
You can set how many seconds each image is
displayed in Slide mode.
Repeat
Turn the slide show Repeat function On or Off.
To Adjust Picture
When MENU is pressed in Photo viewer mode or Single
Play mode, the JPEG menu is displayed.
Procedure
1. Press ▲▼ to select “Picture”.
■ Display/hide Navigation area
Press RECALL.
JPEG menu
To Watch Photos in Slide Show Mode
Picture
JPEG setup
Procedure
3. Press ▲▼ to select each item.
1. Press R to start Slide Show in Photo viewer
mode or Single Play mode.
4. Press ◄► to set each item.
Accessing
Prev.
R G Single
Pause
Next
RETURN
B Y
Picture
Normal
Picture mode
Lamp
Picture
Brightness
Color
Tint
Sharpness
1/2
No
Vivid
0
+30
0
0
0
+17
Picture menu (p. 35)
Notes
• For large image sizes, the display time will be longer than the
number of seconds set.
• To stop in mid-cycle → Press RETURN.
• To stop a slide show → Press OK.
■ Slide Show Setting
Procedure
1. Press MENU to display the JPEG menu.
JPEG menu
Picture
JPEG setup
2. Press ▲▼ to select “JPEG setup”.
48
2. Press OK to display the Picture menu.
Viewing from a GalleryPlayer SD
Card
You can view high definition art and photography
purchased on or downloaded to an SD card.
GalleryPlayer provides pre-loaded SD cards with
copy-protected imagery and images for download to your
computer that can be saved on an SD card for display on
your television.
Visit www.GalleryPlayer.com
<http://www.galleryplayer.com/> for more info.
Setup Features
Surf Mode
You may choose the way in which channels are selected
with ▲▼.
Procedure
1. Press ▲▼ to select “Surf mode”.
2. Press ◄► to select “Favorite” or “All”.
• Favorite - ◄► only displays programs on the Favorite CH
list.
• All - ◄► selects all channels memorized with Auto
Program.
Setup
1/2
Surf mode
All
Language
Program channel
External devices
CC
EZ Sync setting
Signal Meter
Allows you to confirm the signal strength of a desired
channel.
Procedure
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
2. Press OK to display the Program channel
menu.
• If Lock (p. 41) has been set, you must enter your
password to display the Program channel menu.
Setup
Press to display the Setup
menu.
Menu
EZ Sync
Picture
1/2
Surf mode
All
Language
Program channel
External devices
CC
EZ Sync setting
Advanced Operation
1. Press ▲▼ to select “Program channel”.
Audio
Timer
3. Press ▲▼ to select “Signal meter”.
Lock
4. Press OK to display the Signal meter menu.
Memory card
Setup
• While Main Menu (only) is displayed, pressing MENU
will exit the menu screen.
Program channel
ANT in
Auto
Manual
Signal meter
Antenna
■ Return to previous level menu.
Press RETURN to return to previous level menu.
■ Return to normal picture.
Press EXIT to exit menu.
49
Setup Features (continued)
5. Press ◄► to select desired channel.
Monitor out
Signal meter
Channel
When connecting external equipment to this unit - Stops
output of the picture and sound signals at the AV OUT
jacks for the input source selected in this menu to avoid
signal loop.
1-1
Signal strength
Current
30%
Peak level
45%
Procedure
1. Press ▲▼ to select “External devices”.
Note
• The signal meter works only for digital signals input via the
antenna.
2. Press OK to display the External devices
menu.
Setup
Input labels
All
Language
Program channel
External devices
CC
EZ Sync setting
To label video input connections for on-screen display.
Procedure
1. Press ▲▼ to select “External devices”.
3. Press ▲▼ to select “Monitor out”.
2. Press OK to display the External devices
menu.
Setup
4. Press OK to display the Monitor out menu.
1/2
External devices
Surf mode
Input labels
Monitor out
All
Language
Program channel
External devices
CC
EZ Sync setting
5. Press ▲▼ to select each item.
6. Press ◄► to select “On” or “Off”.
Monitor out
3. Press ▲▼ to select “Input labels”.
Comp.1
Comp.2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
Video 3
4. Press OK to display the Input labels menu.
External devices
Input labels
Monitor out
5. Press ▲▼ to select each item.
6. Press ◄► to select the input label.
• To skip the input, select “SKIP”. The input will be skipped
when you press TV/VIDEO.
• Selectable input labels : SKIP, VCR, DVD, CABLE, DBS,
PVR, GAME, AUX, blank (non label).
Input labels
Comp.1
Comp.2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
Video 3
PC
50
1/2
Surf mode
Off
Off
Off
Off
Off
Off
Off
Off
Notes
• Select “Off” to stop output of picture and audio.
(Video 1/Video 2/Video 3)
• Comp.1 / Comp.2 / HDMI 1 / HDMI 2 / HDMI 3 cannot
output video signals regardless of “Monitor out” setting.
When equipment (STB, DVD, etc.) is connected to HDMI or
COMPONENT terminals, only audio signals can be obtained.
From the output terminals, no video signals can be passed.
CC (Closed Caption)
CC Mode for Analog
The television includes a built-in decoder that is capable
of providing a visual display of the audio portion. The
program viewed must provide Closed Caption (CC) for
the television to display it.
Procedure
Choose the Closed Caption service of Analog
broadcasting.
Procedure
1. Press ▲▼ to select “Analog”.
2. Press ◄► to select the setting.
CC
2. Press OK to display the CC (Closed Caption)
menu.
Setup
Mode
Analog
Digital
Digital setting
CC reset
1/2
Surf mode
All
Language
Program channel
External devices
CC
EZ Sync setting
CC1
For video related information that can be
displayed (up to 4 lines of script on the screen,
where it does not disturb the relevant parts of
the picture). Script can be in any language.
CC2/CC3/CC4
Other modes used for video related information.
T1
Blanks out a large portion of the picture on
the television screen, and displays program
guide or any other information currently being
transmitted.
T2/T3/T4
Other modes that display information and blank
out a large portion of the picture of the TV
screen.
CC Mode
Procedure
1. Press ▲▼ to select “Mode”.
2. Press ◄► to select “On” or “Off”.
• Off - Recommended mode when Closed Caption is not
being used.
• On - To display Closed Captions.
CC
Mode
Analog
Digital
Digital setting
CC reset
On
CC1
Primary
Notes
• The Closed Caption is not displayed when you use HDMI
connection.
• If analog connected equipment is used for displaying or
recording, Closed Caption (CC) should be set On/Off on the
connected equipment.
The CC mode setting of the TV will not affect the analog
input.
If a digital program is being output in analog format, the CC
data will also be output in analog format.
If digital connected equipment is used for input, CC should be
set “On” on either the connected equipment or the TV.
If CC is set “On” on both the connected equipment and the
TV, captions from each unit will overlap.
On
CC1
Primary
CC Mode for Digital
The Digital Closed Caption menu lets you configure the
way you choose to view the digital captioning.
Procedure
1. Press ▲▼ to select “Digital”.
2. Press ◄► to select the setting.
• Primary, Second., Service 3, Service 4, Service 5,
Service 6
CC
Mode
Analog
Digital
Digital setting
CC reset
On
CC1
Primary
Advanced Operation
1. Press ▲▼ to select “CC”.
51
Setup Features (continued)
Digital settings
CC Reset
Selecting digital broadcast service and viewing formats.
Reset the CC settings.
Procedure
Procedure
1. Press ▲▼ to select “Digital setting”.
1. Press ▲▼ to select “CC reset”.
2. Press OK to display the Digital setting menu.
2. Press OK to reset Closed Caption settings.
CC
Mode
Analog
Digital
Digital setting
CC reset
CC
On
CC1
Primary
3. Press ▲▼ to select each item.
Digital setting
52
On
CC1
Primary
EZ Sync™ “HDAVI Control™”*
4. Press ◄► to select the setting.
Size
Font
Style
Foreground
Fore opacity
Background
Back opacity
Outline
Mode
Analog
Digital
Digital setting
CC reset
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Size
Automatic, Normal, Small, Large
Font
Automatic, Default, Mono-serif, Prop-serif, Mono,
Prop, Casual, Cursive, Small caps
Style
Automatic, None, Raised, Depressed, Uniform,
Drop shadow
Foreground
The color of the font (Automatic, Black, White, Red,
Green, Blue, Yellow, Magenta, Cyan)
Fore opacity
The opacity of the font (Automatic, Transparent,
Translucent, Solid, Flashing)
Background
The color of the text box (Automatic, Black, White,
Red, Green, Blue, Yellow, Magenta, Cyan)
Back opacity
The opacity of the text box (Automatic,
Transparent, Translucent, Solid, Flashing)
Outline
The outline of the text (if selected under style)
(Automatic, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan)
* Simultaneously control all Panasonic “HDAVI Control”
equipped components using one button on one remote.
Enjoy additional HDMI Inter-Operability with Panasonic
products which have “HDAVI Control” function.
This Projection Display supports “HDAVI Control 2”
function.
Connections to some Panasonic equipment (DVD
Recorder DIGA, HD Camcorder, RAM theater, Player
theater, Amplifier, etc.) with HDMI cables allow you to
interface automatically.
The equipment with “HDAVI Control” function enables
the following operations:
Automatic Input Switching, Power on link, Power off link
and Speaker control (p. 53-54)
In addition, the equipment with “HDAVI Control 2”
function enables the following operation:
EZ Sync Control only with this Projection Display’s
remote control (for “HDAVI Control 2”). (p. 54)
EZ Sync “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known
as HDMI CEC (Consumer Electronics Control), is a
unique function that we have developed and added. As
such, its operation with other manufacturers’ equipment
that supports HDMI CEC cannot be guaranteed.
• For the first time / When adding a new equipment,
reconnecting the equipment or changing the setup.
After the connection turn the equipment on and then
switch this Projection Display on.
Select the input mode to HDMI 1, HDMI 2, or HDMI 3
(p. 29), and make sure that an image is displayed
correctly.
• This function needs an HDMI compliant (fully wired)
cable. Non-HDMI-compliant cables cannot be utilized. It is
recommended that you use Panasonic’s HDMI cable.
Recommended part number: RP-CDHG15 (1.5 m),
RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m)
Item
• This function may not work normally depending on the
equipment condition.
• The equipment can be operated by other equipment’s
remote controls with this function on even if this Projection
Display is in Standby mode.
• Image or sound may not be available for the first few
seconds when the playback starts.
• Image or sound may not be available for the first few
seconds when Input mode is switched.
• Volume function will be displayed when adjusting the
volume of the equipment.
• If you connect the same kind of equipment at once (for
example: one DIGA to HDMI 1 / another DIGA to HDMI 2),
EZ Sync™ is available for the terminal with the smaller
number.
• If you connect the equipment that has “HDAVI Control 2”
function to the TV with HDMI cable, the sound from
DIGITAL AUDIO OUT terminal can be output as
multi-channel surround.
Procedure
1. Press ▲▼ to select “EZ Sync setting”.
EZ Sync
Power off
link
1/2
Surf mode
When “Set” is selected and this Projection Display
is turned off, all connected EZ Sync compatible
equipment is also automatically turned off.
• DIGA (Panasonic DVD Recorder) will not turn off if
it is still in rec mode.
Caution:
• This Projection Display remains on even if the EZ
Sync compatible equipment is turned off.
Power on
link
When “Set” is selected, this Projection Display
is turned on automatically and switches to the
appropriate HDMI input whenever EZ Sync
compatible equipment is initially turned on and Play
mode is selected.
• While the power lamp is blinking, the picture
cannot be seen.
• Power on link will not work until lamp cooling is
completed when power is turned off.
Default
speakers
“TV” is the default setting. To set the Home theater
system as default speakers, change the default
speakers setting from “TV” to “Theater”. Sound will
be output from the Home Theater whenever this
Projection Display is powered on.
2. Press OK to display the EZ Sync setting
menu.
Setup
Explanations
Controls equipment connected to HDMI terminal.
(p. 52-53)
• “Power off link”, “Power on link”, and “Default
speakers” cannot be selected if “Off” is set.
Automatic Input Switching
At the start of the DIGA, Player theater, or RAM theater
playback, this Projection Display’s input automatically
switches to the input based on the playback equipment.
All
Language
Program channel
External devices
CC
EZ Sync setting
• For the RAM theater, the speakers automatically switch to the
theater system.
If using the DIGA operation, this Projection Display’s input
automatically switches to the DIGA and DIGA menu is
displayed.
3. Press ▲▼ to select “EZ Sync”.
4. Press ◄► to select “On”.
• Default setting is “On”. If no HDMI devices are connected
or standard HDMI (without “EZ Sync”) is used, set to “Off”.
EZ Sync setting
EZ Sync
Power off link
Power on link
Default speakers
5. Press ▲▼ to select each item.
6. Press ◄► to select the setting.
On
Set
Set
TV
Speaker control
You can select Home theater, or TV speakers for audio
output.
Control theater speakers with this Projection Display’s
remote control.
This function is available only when Panasonic Amplifier
or Player theater is connected.
Advanced Operation
HDMI connections to some Panasonic equipment
allow you to interface automatically.
Procedure
1. Press EZ Sync to display the EZ Sync menu.
DVD recorder
Home theater
HD camcorder
Speaker output
TV
53
Setup Features (continued)
2. Press ▲▼ to select “Speaker output”.
3. Press ◄► to select “TV” or “Home theater”.
■ Available this Projection Display’s remote
control buttons
Move the cursor/Select
DVD recorder
Home theater
HD camcorder
Speaker output
TV
Set/Access
■ Home theater:
Return to the previous menu
Adjustment for equipment.
Display the Functions menu on the
equipment
• Press VOL +/- for desired volume level.
Press MUTE to mute the sound.
Available when the purpose of the keys
are displayed
Notes
• The sound of TV is muted.
• When the equipment is turned off, TV speakers become
active.
• Selecting “Home theater” turns the equipment on
automatically if it is in standby mode.
■ TV:
The TV speakers are active.
EZ Sync Control (Only for HDAVI Control 2
compatible DVD recorder, Home theater,
and HD camcorder models)
If the “ONE TOUCH PLAY” key is pressed on the
remote control for Panasonic Home Theater system,
the following sequence of operations is performed
automatically.
1. Home Theater power switches On, and playback
begins.
2. TV power switches On, and the playback screen is
displayed.
3. Audio is muted on the TV and switches to the theater
system.
Other Adjust
In the EZ Sync menu, you can select an HDMI
connected Panasonic equipment and access it quickly.
Continue using this Projection Display’s remote control
to operate the equipment, pointing it at the Projection
Display.
Procedure
Procedure
2. Press OK to display the Other adjust menu.
1. Press EZ Sync to display the EZ Sync menu.
DVD recorder
Home theater
HD camcorder
Speaker output
TV
2. Press ▲▼ to select the equipment.
• You can select available items only.
3. Press OK to access the selected equipment.
4. Operate the equipment with this Projection
Display’s remote control, pointing it at the
Projection Display.
• To operate the equipment, read the manual of the
equipment.
54
One-touch theater playback
1. Press ▲▼ to select “Other adjust”.
Setup
2/2
Other adjust
About
Reset
3. Press ▲▼ to select each item.
4. Press ◄► to select “Set” or “No”.
Other adjust
No signal shut-off
No action shut-off
Set
Set
To conserve energy, this Projection Display
automatically turns off when NO SIGNAL continues
more than 10 minutes.
Setup is reset.
Procedure
Notes
• Not in use when setting “PC”, “Photo viewer mode”,
“Lock”, or Digital channel.
• “No signal shut-off was activated” will be displayed
for about 10 seconds when this Projection Display is
turned on for the first time after turning the power off
by “No signal shut-off”.
• The on-screen display will flash 3, 2 and 1 to
indicate the last three (3) remaining minutes prior to
the shut-off.
To conserve energy, this Projection Display
automatically turns off when no operation of remote or
front panel key continues more than 3 hours.
1. Press ▲▼ to select “Reset”.
2. Press OK to display the password screen.
Setup
2/2
Other adjust
About
Reset
3. Enter your password by pressing the
NUMBER keys to reset the Setup settings.
Password
Enter password.
----
Notes
No action • Not in use when setting “PC”.
• “No action shut-off was activated” will be displayed
shut-off
for about 10 seconds when this Projection Display is
turned on for the first time after turning the power off
by “No action shut off”.
• The on-screen display will flash 3, 2 and 1 to
indicate the last three (3) remaining minutes prior to
the shut-off.
0 - 9
4. The confirmation screen is displayed.
Select “Yes”, and press OK.
Reset
Reset all settings
to default.
Yes
About
No
Reset
Display the TV set Version and Software License.
Reset in progress.
Please refrain from any
activity. Do not turn off
or unplug the TV.
Procedure
1. Press ▲▼ to select “About”.
2. Press OK to display the About screen.
Setup
2/2
Other adjust
About
Reset
3. Press ▲▼ to select “Version” or “License”.
4. Press OK to display the Version or License
screen.
Notes
• Performing Reset will clear all items set with Setup, such as
channel settings. Use Reset with care.
• POWER indicator flashes red. After flashing stops, unplug the
unit then plug it back in and turn power ON.
• When using “EZ Sync™ “HDAVI Control™””, with the device
connected, set “EZ Sync” first to “Off” and then “On” using the
Setup Menu. (p. 52-53)
Advanced Operation
No signal
shut-off
Reset
About
Version
License
55
Operating Peripheral Equipment
■ If the equipment does not operate with the
remote control
• When your equipment has a single code
→ Input the remote control code again
• When your equipment has multiple codes
→ Change the code with step 4 and test again
■ Return to the TV mode
Press TV.
Caution
• Registration will fail if the wrong code is input or it takes more
than 30 seconds to register.
To find a code not listed in the code
list
This procedure searches all codes and is called the
“sequence method.”
Procedure
1. After step 3, press ► and POWER to change
the code and test.
You can operate other manufacturers’ equipment using
this Projection Display’s remote control.
Procedure
1. Connect the external equipment to the
Projection Display and Power Off the external
equipment.
2. Press POWER and OK simultaneously for
more than 3 seconds.
• Release the buttons when the equipment selection
buttons start flashing.
3. Select the equipment with the equipment
selection button (VCR, DBS/CBL, DVD).
• The selected button remains lit (other buttons are not lit).
4. Press the NUMBER keys to input the
equipment’s 4-digit remote control code.
(p. 58-60)
5. Press POWER to operate the equipment with
the remote control. (p. 57)
• The external equipment turns On.
56
• Operate the equipment with the remote control. (p. 57)
• Repeat until the code is found.
• It may take many attempts before the correct code is
found.
2 When the correct code is found, press OK.
Remote Control Operation/Code List
The following explains how to operate external devices with the remote control.
• Register the remote control codes (p. 56) if you want to operate an external device of another manufacturer. (p. 58-60)
Note
• Operation may not be possible depending on the available memory size of the remote control.
This remote control is not designed to cover operation of all functions of all models.
■ Remote Control Operation List
This chart defines which keys are operational after programming (if needed) while in the selected remote control
mode, CABLE, DBS, VCR, or DVD.
DBS/CBL MODE
VCR MODE
(DBS)
DVD MODE
(CBL)
Power
Power
Power
Power
—
LIST
LIST
DVD AUDIO
TV Input Switch
TV Input Swtich
TV Input Swtich
TV Input Swtich
—
Menu
Menu
Functions
—
Exit
Exit
—
—
Up/Down/Left/Right
Up/Down/Left/Right
Up/Down/Left/Right
—
Select
Select
Enter
—
Guide
Guide
Sub Menu
—
PPV/VOD
PPV/VOD
Return
—
Red
A
Red
—
Green
B
Green
—
Blue
C
Blue
—
Yellow
D
Yellow
Channel Up/Down
Channel Up/Down
Channel Up/Down
Channel Up/Down
TV Volume Up/Down
TV Volume Up/Down
TV Volume Up/Down
TV Volume Up/Down
—
Aspect
Aspect
—
—
Favorite
Favorite
Direct Navigator
Onscreen Display
Info
Info/Display/OSD
Onscreen Display
TV Mute
TV Mute
TV Mute
TV Mute
0–9
0–9
0–9
0–9
—
Last Channel
Last Channel
Drive Select
—
Sub Channel
Music
PROG (Sub Channel)
—
Page Down/Up
Page Down/Up
Skip Reverse/Forward
TV/VCR Switch
TV/DBS Switch
TV/CBL Switch
—
Rewind/Fast Forward
Rewind/Fast Forward
Rewind/Fast Forward
Reverse/Forward
VCR Record
PVR Record *1
PVR Record *1
Record
Stop
Stop
Stop
Stop
Pause
Pause
Pause
Pause
Play
Play
Play
Play
Information
KEY NAME
*1: Combination type
57
Remote Control Operation/Code List (continued)
■ Remote Control Code List
Cable Converter (
Brand
A-Mark
ABC
Accuphase
Acorn
Action
Active
Americast
Archer
BCC
Bell South
British Telecom
Century
Clearmaster
ClearMax
Cool Box
Coolmax
Director
Fosgate
)
Code
Brand
0008, 0144
0003, 0008, 0237
0003
0237
0237
0237
0899
0237
0276
0899
0003
0008
0883
0883
0883
0883
0476
0276
Cable/PVR Combination (
Brand
Americast
General
Instrument
Jerrold
Code
Brand
Bell ExpressVu
Chaparral
Crossdigital
DirecTV
Dish Network
System
Dishpro
Echostar
Expressvu
Funai
DirecTV
Dish Network
System
58
Multitech
Nova Vision
Novaplex
NSC
0810
Code
0144
0003, 0012, 0276,
0476, 0810
0003
0883
0144
0009, 0273
0003, 0008, 0009
0476, 0810
0003, 0012, 0276,
0476, 0810
0000
0003
0276, 0476, 0810,
1254, 1376
0883
0008
0008
0012
Brand
Pace
Panasonic
Paragon
Penney
Philips
Pioneer
Prism
Pulsar
Quasar
RadioShack
RCA
Regal
Runco
Samsung
Scientific Atlanta
Code
0008, 0237, 0877,
1877
0000, 0008, 0107,
0144
0000, 0008, 0525
0000
0317, 1305
0144, 0533, 0877,
1877
0012
0000
0000
0883
1256
0273, 0276, 0279
0000
0003, 0144
0000, 0003, 0008,
0012, 0237, 0477,
0877, 1877
Brand
Sony
Sprucer
Starcom
Supercable
Supermax
Thomson
Tocom
Torx
Toshiba
Tristar
United Cable
US Electronics
V2
Videoway
Viewmaster
Vision
Vortex View
Zenith
Code
1006
0144
0003
0276
0883
1256
0012
0003
0000
0883
0003, 0276
0003, 0008, 0276
0883
0000
0883
0883
0883
0000, 0525, 0899
)
Motorola
Pace
Pioneer
RCA
Code
0810, 1376
0237, 1877
0877, 1877
1256
Brand
Scientific Atlanta
Sony
Supercable
Thomson
Code
0877, 1877
1006
0276
1256
Brand
Zenith
Code
0899
)
Code
0775
0216
1109
0099, 0247, 0392,
0566, 0639, 0724,
0749, 0819, 1076,
1108, 1109, 1142,
1377, 1392, 1414,
1442, 1609, 1639,
1640, 1749, 1856
0775, 1005, 1505,
1775
0775, 1005, 1505,
1775
0775, 1005, 1505,
1775
0775, 1775
1377
DBS/PVR Combination (S) (
Brand
Memorex
Mitsubishi
Motorola
Brand
0899
0810
Satellite Receiver (
GE
General
Instrument
Gibralter
GMI
GoldStar
Hamlin
Hitachi
Insight
Jerrold
Code
0099, 0392, 0639,
1076, 1142, 1377,
1392, 1442, 1640
0775, 1505
Brand
GE
General
Instrument
GOI
Hitachi
Houston
HTS
Hughes Network
Systems
Innova
Jerrold
JVC
LG
Magnavox
McIntosh
Memorex
Mitsubishi
Code
0392, 0566
0869
0775, 1775
0749, 0819, 1250
0775
0775, 1775
0749, 1142, 1442,
1749
0099
0869
0775, 1775
1414
0722, 0724
0869
0724
0749
Brand
Motorola
Netsat
Next Level
Optimus
Panasonic
Paysat
Philips
Pioneer
Primestar
Proscan
RadioShack
RCA
Code
0856, 0869
0099
0869
0724
0247, 0701, 1786
0724
0099, 0722, 0724,
0749, 0775, 0819,
1076, 1142, 1442,
1749
1142, 1442
0869
0392, 0566
0566, 0775, 0869
0392, 0566, 0775,
1142, 1392, 1442
Brand
Samsung
SKY
Sony
Star Choice
Star Trak
Thomson
Tivo
Toshiba
UltimateTV
Uniden
Voom
Zenith
Code
1108, 1109, 1142,
1276, 1377, 1442,
1609
0856, 0099
0639, 1639, 1640
0869
0869
0392, 0566
1142, 1442
0749, 0790, 0819,
1285, 1749
1392, 1640
0724, 0722
0869
0856, 1856
)
Brand
Dishpro
Echostar
Expressvu
Hughes Network
Systems
Code
0775, 1505
0775, 1505
0775
1142, 1442
Brand
Motorola
Philips
Proscan
RCA
Samsung
Code
0869
1142, 1442
0392
1392
1442
Brand
Sony
Star Choice
Code
0639, 1640
0869
)
Brand
A-Mark
ABS
Admiral
Adventura
Aiko
Aiwa
Alba
Alienware
Allegro
America Action
American High
Amstrad
Asha
Astra
Audiovox
Avis
Beaumark
Bell & Howell
Broksonic
Calix
Candle
Canon
Capehart
Carrera
Carver
CCE
Cineral
Citizen
Classic
Colortyme
Colt
Craig
Criterion
Crosley
Crown
Curtis Mathes
Cybernex
CyberPower
Daewoo
Daytron
Dell
Denon
DirecTV
Dual
Durabrand
Dynatech
Electrohome
Electrophonic
Emerald
Emerex
Emerson
Fisher
Fuji
Fujitsu
Funai
Garrard
Gateway
GE
Code
0000, 0037, 0240,
0278
1972
0039, 0047, 0048,
0060, 0209, 0479
0000, 0037, 0240
0278
0000, 0037
0209, 0278
1972
0039
0278
0035, 0081
0000
0240
0035, 0240
0037, 0038, 0278
0000
0240
0000, 0035, 0039,
0048, 0479
0002, 0121, 0209,
0479, 1479
0037
0037, 0038
0035
0002
0240
0035, 0081
0278
0278
0000, 0035, 0037,
0209, 0240, 0278,
0479, 1278
0037
0035, 0045, 0060,
0278
0000
0037, 0047, 0240
0000
0000, 0035, 0081
0278
0000, 0035, 0060,
0162, 0240, 0278,
0432, 1035
0240
1972
0037, 0045, 0278,
1278
0037, 0278
1972
0042, 0081
0739
0000
0038, 0039
0000, 0240
0000, 0037, 0043,
0060, 0209, 0240
0037
0121, 0184
0032
0000, 0002, 0037,
0043, 0121, 0184,
0209, 0240, 0278,
0479, 1278, 1479
0000, 0039, 0047
0033, 0035
0000
0000, 0037, 0278
0000
1972
0000, 0035, 0048,
0060, 0240, 0807,
1035, 1060
Brand
Gemini
Genexxa
Go Video
GoldStar
Goodmans
Gradiente
Granada
Grundig
Harley Davidson
Harman/Kardon
Hewlett Packard
HI-Q
Hitachi
Howard
Computers
HP
Hughes Network
Systems
Humax
Hush
Hytek
iBUYPOWER
ITT Nokia
Janeil
Jensen
JVC
KEC
Kenwood
Kodak
KTV
LG
Linksys
Lloyd’s
Loewe
Logik
Lumatron
LXI
Code
Brand
0060
0000, 0037, 0278
0240, 0432, 0614
0000, 0035, 0037,
0038, 0039, 0278,
1237
0000, 0037, 0081,
0278
0000
0042, 0081
0081
0000
0038, 0081
1972
0000, 0035, 0047
0000, 0035, 0037,
0042, 0045, 0089
1972
NAD
NEC
Nikko
Nikkodo
Nishi
Niveus Media
Noblex
Northgate
Olympus
Optimus
1972
0042, 0739
Penney
0739
1972
0000, 0047
1972
0240
0240
0067
0067
0037, 0278
0038, 0067
0035, 0037
0000
0037, 0038, 0240
1972
0000, 0038, 0240
0081
0000, 0240
0278
0000, 0037, 0042,
0067
M Electronic
0240
Magnasonic
0000, 0037, 0240,
0278, 1278
Magnavox
0000, 0035, 0037,
0039, 0048, 0081,
0240, 0618, 1781
Magnin
0240
Marantz
0035, 0038, 0081
Marta
0037
Matsui
0037, 0209
Matsushita
0035, 0162, 0081
Media Center PC 1972
MEI
0035
Memorex
0000, 0035, 0037,
0039, 0162, 0047,
0048, 0209, 0240,
0278, 0479, 1237
Metz
0037
MGA
0043, 0060, 0240
MGN Technology 0240
Microsoft
1972
Midland
0240
Mind
1972
Minolta
0042
Mitsubishi
0000, 0042, 0043,
0047, 0048, 0060,
0067, 0807
Motorola
0035, 0048
MTC
0000, 0240
MTX
0000
Multitech
0000, 0039
Orion
Panama
Panasonic
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Portland
Profitronic
Proscan
Protec
Pulsar
Pulser
Quartz
Quasar
RadioShack
Radix
Randex
RCA
Realistic
ReplayTV
Ricavision
Runco
Samsung
Samtron
Sanky
Sansui
Sanyo
Scott
Sears
Code
0240
0038, 0067
0037, 0278
0037, 0278
0240
1972
0240
1972
0035, 0162
0000, 0035, 0037,
0047, 0048, 0162,
0240, 0432, 1062
0000, 0002, 0121,
0184, 0209, 0240,
0278, 0479, 1479
0035
0000, 0035, 0162,
0225, 0614, 0616,
1035, 1062, 1244
0000, 0035, 0037,
0038, 0042, 0047,
0067, 0081, 0162,
0240, 1035, 1237
0042
0000, 0035, 0081,
0209, 0479
0000, 0035, 0048,
0045, 0081, 0162,
0209, 0616, 0618,
0739
0037
0042, 0067, 0081,
0162
0081
0278
0240
0060, 1060
0000
0039, 0240, 0278
0240
0035, 0047
0002, 0035, 0162,
1035
0000, 0035, 0037,
0047, 0048, 0162,
0240
0037
0037
0000, 0035, 0042,
0045, 0048, 0060,
0240, 0807, 0880,
1035, 1060
0000, 0035, 0037,
0047, 0048, 0121,
0162, 0240, 0278
0614, 0616
1972
0039
0000, 0038, 0045,
0060, 0240, 0432,
0739, 1014
0240
0039, 0048
0000, 0002, 0067,
0209, 0240, 0479,
1479
0000, 0047, 0240,
0479
0043, 0045, 0184,
0121
0000, 0033, 0035,
0037, 0039, 0042,
0043, 0045, 0047,
0048, 0060, 0067,
0162, 0209, 1237
Brand
Sharp
Shintom
Shogun
Siemens
Signature
Singer
Sonic Blue
Sony
Soundmaster
Stack 9
STS
SV2000
SVA
Sylvania
Symphonic
Systemax
Tagar Systems
Tandy
Tatung
Teac
Technics
Teknika
Telecorder
Tevion
Thomas
Thomson
Tisonic
Tivo
TMK
TNIX
Tocom
Toshiba
Tosonic
Totevision
Touch
Trix
Ultra
Unitech
Vector
Vector Research
Victor
Video Concepts
Videomagic
Videosonic
Viewsonic
Villain
Voodoo
Wards
White
Westinghouse
World
XR-1000
Yamaha
Zenith
ZT Group
Code
0048, 0047, 0032,
0000, 0807
0000, 0039, 0240
0240
0037
0000, 0035, 0037,
0048, 0060, 0479
0037, 0240
0614, 0616
0000, 0032, 0033,
0035, 0047, 0067,
0636, 1232, 1972
0000
1972
0042
0000
0000
0000, 0035, 0043,
0081, 1781
0000, 0002, 0240
1972
1972
0000
0000, 0048, 0067,
0081
0000, 0067
0000, 0035, 0037,
0162
0000, 0035, 0037
0240
0479
0000, 0002
0060
0278
0618, 0636, 0739,
1996
0000, 0240
0037
0240
0000, 0043, 0045,
0209, 0240, 0845,
1008, 1145, 1972,
1996
0278
0037, 0240
1972
0037
0045, 0278
0240
0045
0038, 0184
0067
0045
0037
0000, 0240
1972
0000
1972
0000, 0060, 0033,
0035, 0037, 0038,
0042, 0043, 0045,
0047, 0048, 0081,
0240, 0479
0000, 0209, 0278,
0479
0002, 0209, 0479
0000, 0035, 0240
0038
0000, 0033, 0037,
0039, 0209, 0278,
0479, 1479
1972
Information
VCR (
59
Remote Control Operation/Code List (continued)
DBS/PVR Combination (V) (
Brand
Code
Hughes Network
Systems
PVR (V) (
3D LAB
Aiwa
Akai
Alba
Alco
Allegro
Apex Digital
Arrgo
Audiovox
Blue Parade
Blue Sky
Brandt
Broksonic
California Audio
Labs
Celestial
Centrex
CineVision
Clairtone
Creative
CyberHome
60
Brand
1972
1972
1972
1972
0739
1972
1972
1972
Hughes Network
Systems
Humax
Hush
iBUYPOWER
Linksys
Media Center PC
Microsoft
Mind
Niveus Media
1972
Code
Brand
0503, 0539
0641
0695, 0899
0672
0790
0869
0533, 0672, 1020,
1056, 1061
1023
0790
0571
0695
0651
0695
0490
Funai
GE
Go Video
1020
0672
0869
0571
0503, 0539
0816, 0874, 1023,
1129
0784, 0869, 1172
0490, 0634
0672
0675
0675
0521
0591, 0675, 1268
0591
0503, 0539
1268
0651
Kawasaki
Kenwood
KLH
Kloss
Koss
Lasonic
Lecson
LG
LiteOn
Loewe
Magnasonic
Magnavox
DVD-Recorder (Y) (
Brand
Code
0739
0739
Code
0739
0739
1972
1972
1972
1972
1972
1972
1972
Brand
Northgate
Panasonic
Philips
RCA
ReplayTV
Samsung
Sonic Blue
Sony
Stack 9
Systemax
Code
1972
0616
0618, 0739
0880
0614, 0616
0739
0614, 0616
0636, 1972
1972
1972
Brand
Tagar Systems
Tivo
Toshiba
Touch
Viewsonic
Voodoo
ZT Group
Code
1972
0618, 0636, 0739
1008, 1972, 1996
1972
1972
1972
1972
)
Brand
Apex Digital
CyberHome
Funai
Go Video
JVC
Philips
Samsung
Code
ABS
Alienware
CyberPower
Dell
DirecTV
Gateway
Hewlett Packard
Howard
Computers
HP
Daewoo
Denon
Digitrex
Disney
Dual
DVD2000
Emerson
Enterprise
Entivo
ESA
Firstline
Brand
0739
)
Brand
DVD (
)
Code
1056
1129
0675
0741
1164
GoldStar
Goodmans
Gradiente
Grundig
Harman/Kardon
Hitachi
Hiteker
Insignia
Integra
JMB
JVC
Marantz
McIntosh
Medion
Memorex
Microsoft
Code
0675, 1268
0522, 0815
0573, 0741, 0744,
0869, 1044, 1075
0741, 0869
0790
0490, 0651
0539
0582
0573, 0664
0672
1268
0571, 0627
0695
0558, 0623, 0867,
1164
0790
0490, 0534
0790, 1020
0533
0651, 1061
0627
1533
0591, 0741, 0869
1058
0741
0651, 0675
0503, 0539, 0646,
0675, 1268
0503, 0539, 0675
1533
0651
0695
0522
Brand
Minato
Mintek
Mitsubishi
NAD
NEC
Onkyo
Optimus
Oritron
Palsonic
Panasonic
Philips
Pioneer
Polaroid
Polk Audio
Presidian
Proceed
Proscan
Qwestar
Radionette
RadioShack
RCA
Realistic
Reoc
Rio
Rotel
Saba
Sampo
Code
0752
0839
1521, 0521
0591, 0741
0785, 0869
0503, 0627, 0792
0571
0651
0672
0503, 0490, 0571,
0703, 1362, 1462,
1490, 1762, 2006,
2016, 2026, 1779
0503, 0539, 0646,
0675, 1267, 1354
0525, 0571, 0631
1020, 1061
0539
0675
0672
0522
0651
0741
0571
0522, 0571, 0790,
0822, 1022, 1132
0571
0752
0869
0623
0651
0752
Brand
Samsung
Sansui
Sanyo
Schwaiger
Sharp
Shinsonic
Slim Art
Sonic Blue
Sony
Sylvania
Symphonic
Teac
Technics
Tevion
Theta Digital
Thomson
Toshiba
Universum
Urban Concepts
US Logic
Venturer
Xbox
Yamaha
Zenith
Zeus
Code
0490, 0573, 0744,
0820, 0899, 1044,
1075
0695
0675, 0695
0752
0630, 0675, 0752,
1256
0533, 0839
0784
0573, 0869
0533, 0864, 1033,
1431, 1533
0675, 1268
0675, 1268
0571, 0790
0490, 0703
0651
0571
0522
0503, 0539, 0573,
0695, 1045, 1154
0591
0503, 0539
0839
0790
0522
0490, 0539, 0545
0503, 0591, 0741,
0869
0784
)
Brand
LG
Magnavox
Panasonic
Philips
Code
0741
0646, 0675
0490, 2006, 2016,
2026
0646
Brand
Pioneer
RCA
Samsung
Sharp
Sony
Code
0631
0522
0490
0675
1033, 1431
Brand
Sylvania
Zenith
Code
0675
0741
Warning Indicators
Indicator lights on the front of the unit alert you to the unit’s internal condition. (p. 10)
If the Power or LAMP indicators flash, turn unit off and follow the directions below.
POWER
Indicator
LAMP
Indicator
Symptom
Problem
Flashes orange 1 time.
Power shuts off.
Malfunction 1.
Flashes orange 2 times.
Power shuts off.
Malfunction 2.
Flashes orange 3 times.
Power shuts off.
Malfunction 3.
Flashes orange 4 times.
Power shuts off.
Malfunction 4.
Flashes orange 6 times.
Power shuts off.
Malfunction 5.
Flashes orange 7 times.
Power shuts off.
Malfunction 6.
Flashes orange 9 times.
Power shuts off.
Malfunction 7.
Flashes orange 10 times.
Power shuts off.
Malfunction 8.
Flashes red 2 times.
Power shuts off.
Malfunction 9.
Flashes red 3 times.
Power shuts off.
Internal overheat error.*1
Flashes red 4 times.
Power shuts off.
Internal overheat error.*1
Flashes red 5 times.
Power shuts off.
Malfunction 10.
Flashes red 8 times.
Power shuts off.
Malfunction 11.
Flashes red 9 times.
Power shuts off.
Malfunction 12.
Flashes red 10 times.
Power shuts off.
Malfunction 13.
Flashes red 11 times.
Power shuts off.
Malfunction 14.
Flashes red 12 times.
Power shuts off.
Malfunction 15.
Flashes red 13 times.
Power shuts off.
Malfunction 16.
Possible Solution
Disconnect the AC plug, and wait a while.
Reconnect the AC plug, then turn unit power on. If
error persists, contact service center.
Wait a while, then try turning Power On several
times. If error persists, contact service center.
Disconnect the AC plug, and wait a while.
Reconnect the AC plug, then turn unit power on. If
error persists, contact service center.
Wait a while, then try turning Power On several
times. If error persists, contact service center.
*1: Once necessary steps have been taken, and before turning unit back On, be sure the unit has sufficiently cooled down. Especially
if the unit was used for a long period, the lamp may take a while to cool down.
Information
Indicator
61
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Problem
Possible solution
Power does not turn ON.
• Is the power cord plugged in?
Remote Control/ Unit buttons do not function.
Power does not turn ON or OFF.
Image is distorted. Image freezes.
• Press unit POWER button down over 7 seconds. The POWER indicator goes
out. If the Power was On, the screen will also disappear. After 5 seconds, turn
Power On and operate unit normally. If the steps above do not restore normal
operation, disconnect then reconnect the AC plug and turn the power On.
The power
turns OFF.
Power turns off while another
• Please consult your nearest dealer.
indicator is flashing.
24
-
61
• Are the batteries dead or inserted incorrectly?
7
Remote Control does not function.
• Is the Remote Control sensor in direct fluorescent lamp light or other strong
sources of light?
10
Image shakes.
• Is the antenna or antenna cable old, broken, or shorted out?
• Is the antenna cable connected properly?
12-17
• A sudden temperature change may have caused condensation in the internal
optics which results in blurring or vertical lines. Please wait until room
temperature is normal and constant before turning power ON. These symptoms
will clear up as time passes.
-
• Depending on the connected device, a 1080i input signal may cause the picture
to flicker. If the connected device has a format selection switch, set the format
to 720p.
-
• When using a VCR and selecting channels on the TV, is the TV/VIDEO mode
for the VCR set to TV?
-
• Is the antenna facing the right direction?
-
• Is the antenna receiving any signals reflected off of mountains or buildings?
-
Images disappear at the top and bottom of the
screen.
• When using 16:9 image software (cinema vision size software, etc.), there is no
picture at the top and bottom of the screen.
-
During ZOOM modes, the image is cut off at
the top and bottom.
• Please adjust the V-Size. This is not a mulfunction.
Some parts of the screen are always lit while
others do not light up.
Some parts of the screen do not light up.
• This is a characteristic of the LCD panel and not a malfunction.
Fan is operating even though TV Power is
OFF.
• This is because the cooling fan is operating. The fan will stop after about
30 seconds.
Leaving stationary images, such as still video
images, web pages, or filler bars (used for
NORMAL aspect mode), on-screen for an
extended period of time can leave ghost
images on the screen.
• This is a characteristic of the LCD panel and not a malfunction. Try displaying
constantly moving pictures which fill the entire screen, or turn the power OFF
for a while to return the screen to normal.
Image is not clear.
(blurring / vertical lines)
Color patches or no color.
Image appears doubled or tripled.
• Is the HDMI cable connected properly?
Pictures from equipment are unusual when the
equipment is connected via HDMI.
• Turn Off the TV unit and device, then turn them On again.
No sound is produced.
33, 36
-
24
-
12, 1418, 21-22
-
• Check the input signal from the equipment.
29
• Is “Sound Mute” active?
30
• Is the volume set to the minimum?
29
• Is “Speaker output” set to “Off”?
39
• Change “SAP” settings.
32
• Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” insettings when the equipment is
connected via HDMI.
39
• If digital sound connection has problem, select analog sound connection.
62
Page
21-23, 39
Specifications
PT-50LCZ70/PT-50LCZ7/
PT-50LCZ70-K
PT-56LCZ70/PT-56LCZ7/
PT-56LCZ70-K
PT-61LCZ70/PT-61LCZ7/
PT-61LCZ70-K
Power Source
AC 120 V, 60 Hz
Power Consumption
Power ON:
Power OFF:
LCD panels
0.74″ Poly silicon TFT LCD panel × 3
2 073 600 (1 920 × 1 080) stripe pixels × 3 panels (16:9)
Display
50-inch, 16 : 9 aspect ratio
Speaker
2 Speakers 20 W [10 W + 10 W ] (10 % THD)
Light Source
LUXIM® LIFI™ Electrodeless RF Lamp (LFS4000)
Channel Capability
(Digital/Analog)
VHF/UHF
Cable
2-69
1-135
PC INPUT
RGB analog
AUDIO
0.7 Vp-p (75 Ω) (D-SUB 15P)
0.5 Vrms (M3 Stereo mini Pin Jack)
AV INPUT 1-3
VIDEO
S-VIDEO
AUDIO L-R
1.0 Vp-p (75 Ω) (RCA Pin Jack)
Y : 1 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω) (Mini DIN 4 pin)
0.5 Vrms (RCA Pin Jack × 2)
COMPONENT
VIDEO INPUT
1-2
Y
PB / PR
AUDIO L-R
1.0 Vp-p (with sync) (75 Ω) (Pin Jack)
± 0.35 Vp-p (75 Ω) (Pin Jack × 2)
0.5 Vrms (RCA Pin Jack × 2)
HDMI 1-3
HDMI type A Connector
• This Projection Display supports “HDAVI Control 2” function.
AUDIO L-R
0.5 Vrms (RCA Pin Jack Type × 2)
56-inch, 16 : 9 aspect ratio
61-inch, 16 : 9 aspect ratio
Card slot
SD CARD slot × 1
Output signals
(AV OUT)
VIDEO
AUDIO L-R
Dimensions
(W×H×D)
1 192 mm (W) × 836 mm (H) ×
418 mm (D)
46.9″ (W) × 32.9″ (H) × 16.5″ (D)
1 322 mm (W) × 923 mm (H) ×
451 mm (D)
52″ (W) × 36.3″ (H) × 17.8″ (D)
1 432 mm (W) × 996 mm (H) ×
483 mm (D)
56.4″ (W) × 39.2″ (H) × 19″ (D)
Weight (Mass)
28 kg (61.7 lbs.) Net
33 kg (72.8 lbs.) Net
35 kg (77.2 lbs.) Net
Operating conditions
Temperature : 0 °C – 35 °C (32 °F - 95 °F)
Humidity : 20 % - 80 % (non-condensing)
1.0 Vp-p (75 Ω) (RCA Pin Jack)
0.5 Vrms (RCA Pin Jack × 2)
Note
• Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
Information
Input
Terminals
Approx. 360 W
Approx. 0.4 W (When cooling fan is stopped)
63
Customer Services Directory (for U.S.A.)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and
Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/consumersupport
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company (PSTC)
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Service in Puerto Rico
Panasonic Puerto Rico, Inc. Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300 Fax (787)768-2910
64
Limited Warranty (for U.S.A.)
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF PANASONIC CORPORATION OF NORTH
AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
PANASONIC SALES COMPANY, DIVISION OF PANASONIC
PUERTO RICO, INC.,
AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Panasonic LIFI™ HDTV
Limited Warranty
CATEGORY
LIFI™ HDTV
PARTS
One (1) Year except LIFI™ lamp unit
Original LIFI™ lamp unit - 5 years
LABOR
SERVICE
1 Year
In-Home or Carry-In
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be
no charge for parts. You must carry-in your product or arrange for in-home service during the warranty period. If nonrechargeable batteries are included, they are not warranted. This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product
which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty
service.
Carry-in or In-Home Service
For In-Home or Carry-In Service in the United States call 1-888-VIEW-PTV (1-888-843-9788).
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.
In-Home service requires clear, complete and easy access to the product by the authorized servicer and does not
include removal or re-installation of an installed product. It is possible that certain in-home repairs will not be completed
in-home, but will require that the product, or parts of the product, be removed for shop diagnosis and/or repair and then
returned.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty also does not cover damages which occurred in shipment, or failures
which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse,
neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office,
restaurant, or other business), rental use of the product, service by anyone other than a Factory Servicenter or other
Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this
excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to
and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE
LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long
an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights, which vary, from state to state. If a
problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the
problem is not handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the addresses
listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE APPLICABLE) WHICH ARE
NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Information
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer
Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length of the
period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision
to repair or replace will be made by the warrantor.
65
Limited Warranty (for Canada)
Panasonic Canada Inc.
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect for a period as stated below from the date of original purchase.
LCD Rear Projection TV
In home Service
PARTS
LABOR
One (1) Year except LIFI™ lamp unit
Original LIFI™ lamp unit - 5 years
1 Year
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic
service facility.
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly
installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or
which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it
cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original
purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or
the exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
For product operation and information assistance, please contact:
Our Customer Care Centre:
Telephone #:
1-800 #:
Fax #:
Email link:
(905) 624-5505
1-800-561-5505
(905) 238-2360
“Customer support” on www.panasonic.ca
FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
Link : “Servicentres™ locator” under “Customer support”
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
66
Index
1080i ..................................................... 23
F
R
1080p.................................................... 23
Favorite Feature ................................... 31
R-TUNE button ................................. 9, 29
480i ....................................................... 23
First Time Setup ................................... 25
RECALL button................................. 9, 30
720p...................................................... 23
A
ASPECT button ................................ 9, 33
Automatic program setting.................... 26
Auto shut off ......................................... 24
B
Blocking Messages............................... 45
Block program ...................................... 43
C
Card Warning Messages ...................... 46
Channel and Program Tuning .............. 30
Channel Lock (Block channel selection)
.............................................................. 42
Channel up / down buttons ......... 9, 10, 29
G
Game Lock ........................................... 43
H
HDMI ........................................ 23, 29, 39
HDMI input terminals ............................ 11
Reset .................................................... 55
Reset All Memory Functions................... 7
RGB cable ............................................ 19
S
SAP button ....................................... 9, 32
I
SD Card .......................................... 46–48
Input 1, 2, 3 terminals ..................... 10–11
Selecting Input Mode ............................ 29
Input labels ........................................... 50
Signal Meter ......................................... 49
Insert/Remove the Card ....................... 46
Sleep Timer .......................................... 40
J
JPEG .............................................. 46–48
Sound mute .......................................... 30
Surf Mode ............................................. 49
SVGA.................................................... 20
L
Switching languages for display ........... 26
LAMP indicator ............................... 10, 61
SXGA.................................................... 20
Lock Set................................................ 42
Cleaning ................................................. 8
Closed Caption (CC) ...................... 51–52
M
Component signal input 1-2 terminals .. 11
Manual program setting ........................ 27
Connecting Antenna (To watch TV) ..... 13
Monitor out............................................ 50
Connecting DVD recorder (VCR)
(To record/playback)....................... 14–15
MPAA ............................................. 41, 43
Connecting DVD recorder (VCR)
and satellite receiver....................... 16–17
Remote Control Sensor ........................ 10
MUTE button .................................... 9, 30
N
T
TV/VIDEO button .............................. 9, 10
U
Unit Status Display ............................... 30
V
VGA ...................................................... 20
NUMBER keys.................................. 9, 30
Viewing from a GalleryPlayer SD Card
.............................................................. 48
Connecting PC ............................... 19–20
P
Volume +/- buttons ..................... 9, 10, 29
Password .................................. 41–42, 45
D
PC Adjust.............................................. 37
W
Display the SUB MENU ........................ 31
PC input terminal .................................. 11
DTV ...................................................... 30
PC position ........................................... 29
E
Picture Mode ........................................ 36
X
POWER button (Remote Control) .... 9, 24
XGA ...................................................... 20
POWER button /
POWER indicator (Unit)............ 10, 24, 61
Z
Connecting Home Theater and
DVD recorder........................................ 18
EZ Sync™ ............................................ 34
EZ Sync™ “HDAVI Control™” ........ 52–54
EZ Sync™ Connections ....................... 22
WVGA................................................... 20
WXGA................................................... 20
Zoom Adjust ......................................... 36
Information
480p...................................................... 23
67
Customer’s Record
The serial number of this product can be found on its back cover. You should note this serial number in the space
provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in
identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Sales Company (“PSC”), Division of
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario L4W 2T3
(905) 624-5010
www.panasonic.ca
Printed in U.S.A.
LSQT1225 A
S0407-0
">