- No category
advertisement
FA150 Dedicated Man Rider ® Air Winch
150 kg (330 lb)
Lift-to-Shift variable
speed lever provides precise control and built-in safety
Drum guard
standard to protect operator
Slack wire detector automatically stops the winch from paying out in case of slack wire
Radial piston air
motor provides reliable power with adjustable speed for any use
Ideal for:
Onshore Offshore Marine
Marine 812 finish paint standard for enhanced corrosion resistance
Filter, regulator, lubricator air
preparation package included to protect internal components
FA150 Dedicated Man Rider ® Air Winch
150 kg (330 lb)
Ingersoll Rand FA150 Man Rider® winches are specifically designed for safe and reliable personnel lifting. They feature a tough steel frame with protection for critical components and marine grade paint to stand up to harsh environments. Their rugged radial piston air motors provide reliable power under all conditions. FA150 Man Rider® winches include multiple fail-safe features to help keep your personnel safe. Designed to meet the latest regulations including CE, ATEX and DNV type approval,
Ingersoll Rand FA150 Man Rider® winches work wherever you do. Built with our decades of experience, count on Ingersoll Rand’s time-proven design wherever you need to lift or lower people.
1129 [44.5]
40.2
[1021]
305 [12.0]
AIR INLET
3/4” NPT
LIMIT
SWITCH
720
[28.3]
273
[10.75]
483
[19.0]
MOTOR
EXHAUST
3/4” NPT
ø17 [.69]
579 [22.8]
Dimensions shown are mm. Dimensions in Brackets [ ] are inches.
Dimensions are subject to change. Contact factory for certified drawings.
Bolt Pattern
B B
C
DRUM A
Models
FA150
13 [.50]
A mm (in)
508 (20.0)
B mm (in)
229 (9.0)
356
[14.0]
51 [2.0]
132
[5.2 ]
254 [10.0]
508 [20.0]
610 [24.0]
C mm (in)
18 (0.69)
Total Number of Holes
6
41
[1.6]
Available Options
Stainless steel hose package
Drum guard with manual rope guide
Emergency lowering system
Model
FA150KGiMR
Layer 6
183 (551)
Layer 7
220 (663)
Layer 8
259 (780)
For more options or custom configuration, please contact us at www.ingersollrandproducts.com/lifting or [email protected]
General Performance. Performance based on a 10:1 design factor
Line Pull Capacity
Model
FA150KGiMR
First Layer kg (lb)
150 (330)
Mid Drum kg (lb)
150 (330)
Top Layer kg (lb)
150 (330)
First Layer m/min (fpm)
25 (82)
Line Speed
Mid Drum m/min (fpm)
27 (89)
General Characteristics. Performance at 6.3 bar (90 psi) air inlet pressure with the motor running
Motor Lifting Speed at Top Layer
Air Consumption with Rated Load
Air Volume
Needed to Move
Rated Load at
Top Layer
Model
FA150KGiMR kW (hp)
1.5 (2) m/min (f/fpm)
29 (95) m 3 /min (ft 3 /min)
14 (50)
3 m (10 ft)
0.4 (17.2)
Drum Capacity
Model
FA150KGiMR
Minimum Rope
Breaking Force (1) kN (lbs)
14.7 (3,300)
Recommended
Rope Diameter mm (in)
10 (7/16)
Layer 1
26 (77)
Layer 2
54 (161)
Sound Level as per EN 14492-1 dB(A)
89
Drum Capacity per Layer m (ft)
Layer 3
(2)
84 (249)
Layer 4
115 (344)
Layer 9
299 (904)
Layer 10
341
Layer 11
385
Top Layer m/min (fpm)
29 (95)
Net Weight kg (lb)
340 (750)
Layer 5
148 (445)
Max. Rope Storage
Capacity (3) m (ft)
385 (904)
(1) Recommended minimum breaking force of wire rope based on top layer line pull rating.
(2)
(3)
Drum Capacity is based on tightly wound wire rope. Recommended drum working capacity is 80% of values shown.
Max storage capacity is tightly wound with no freeboard.
How to Order
FA 150KGi MR 12 A 1 BHRP1
Series
FA Air powered
Personnel Capacity kg (lb)
150KGi 150 (330)
Man Rider®
MR Man Rider®
Drum
Length
(in)
12
Drum Brake
A Auto drum
brake
Control
1
Std. winch mounted
NOTE:
(1) M1 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 2.2 on load bearing parts.
This conformity document affirms (by the manufacturer) that parts are in compliance with the requirements of the order based on non-specific inspection and testing (i.e., results are typical material properties for these parts).
M2 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts.
These documents affirm (by a department independent of the manufacturing department) that the actual parts used in the product are in compliance with the order based on specific inspection and testing (i.e., results are actual material properties for those parts).
M3 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts.
These documents affirm (by a department independent of the manufacturing department) that the actual parts used in the product are in compliance with the order based on specific inspection and testing (i.e., results are actual material properties for those parts in a finished, as delivered condition).
Options
7
A
B
Drum grooving; specify rope size in sixteenths, e.g., 7 = 7/16"
Drum guard with manual rope guide
Winch pedestal base
C1M3 -20˚ C ABS
C2M3 -20˚ C DNV
H
K
Stainless steel hose package for limit switch
Stowage valve kit installed on winch
M1 (1) Per DIN 50049/EN10204 Para 2.2 “Typicals”
M2 (1) Per DIN 50049/EN10204 Para 3.1 actual per product as purchased
M3 (1) Per DIN 50049/EN10204 Para 3.1 actual per product as delivered in final condition
N4 Manufactured under ABS survey
N5 Manufactured under DNV survey
P1 Marine 812-X paint system
P2 Marine 812-X paint system - isocyanate free
R Emergency lowering system
W1 ABS witness test
W2 DNV witness test
W3 LRS witness test
W4 Client witness of load test
-CE Compliance with the European Machinery
Directive and EN14492-1 for power driven winches
A Tradition of Proven Reliability, Efficiency and Productivity
Edmonton, Canada
Seattle, USA
Houston, USA
Charlotte, USA
Manchester, UK Brussels, Belgium
Oberhausen, Germany
Douai, France
Moscow, Russia
United Arab Emirates
Korea
Japan
Shanghai, China
Mexico City
Singapore
Brazil
Australia
Johannesburg,
South Africa
No matter where you are located, Ingersoll Rand is committed to serving and providing you with the necessary information with regard to our products and services. Our world-wide network of distributors, certified technicians and engineers are a telephone call away — ready to support you with innovative and cost-effective solutions that will keep your business running at peak performance.
For More Information www.ingersollrandproducts.com/lifting [email protected]
Ingersoll Rand, IR, the IR logo and Impactool are trademarks of Ingersoll Rand, its subsidiaries and/or affiliates. All other trademarks are the property of their respective owners. Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of products shall be in accordance with
Ingersoll Rand’s standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change without notice or obligation. Unless otherwise noted this equipment is not designed for transporting people or lifting loads over people. It is the user’s responsibility to determine the suitability of this product for any particular use and to check compliance with applicable regulations. Before installation, see maintenance and operations manual for additional warnings and precautions.
www.ingersollrandproducts.com
© 2015 Ingersoll Rand IRITS-0615-052
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project