Grizzly H2881 x 1-1/8" Hand-Held Pneumatic Drum Sander Owner Manual
Below you will find brief information for Pneumatic Drum Sander H2881. The H2881 is a 4" pneumatic drum sander that is perfect for hand contouring and smoothing projects that are too large to use with a stationary sander. Simply chuck the 3/8" spindle into a portable electric drill, cordless drill or air powered drill for two-handed control. Choose this 4" x 1 1/8" diameter size for getting into tight areas. Features ball bearing handle and air valve for easy bicycle pump inflation.
Advertisement
Advertisement
Advertisement
Key features
Rolling-pin style
4" diameter
Ball bearing handle
Air valve for easy bicycle pump inflation
Hand contouring and smoothing
Use with portable drill
Sanding sleeves available in various grits
Frequently asked questions
Remove the plastic cap on the handle with a small screwdriver to expose the air valve and inflate to the desired pressure. Do not exceed 8 PSI.
Aluminum oxide sanding sleeves are available in grits ranging from 60 to 320.
Wear safety glasses and hearing protection during use, and wear appropriate respiratory protection when sanding as it produces fine dust.
The maximum inflation pressure for the sander is 8 PSI.
You can call Grizzly's Tech Support at (570) 546-9663.