Hotpoint WT540 Washer/Dryer User manual

Show HTML Add to My manuals
16 Pages

advertisement

Hotpoint WT540 Washing Machine User Manual | Manualzz
Washing Machine Programme Guide
Aquarius
Aquarius+
7
kg
Wash Labels Explained
GB
The number inside the wash tub shows the maximum water temperature,
in ˚C.
If there are no bars, the garment can be spun and rinsed as normal.
One bar indicates a reduced spin speed programme should be used.
Two bars mean the clothes need a mild wash action, but can be spun and
rinsed normally. Such items should not be wrung out by hand.
If the tub contains a hand, wash the item on a Hand Wash programme.
A triangle means that you can safely use a cold, dilute solution of bleach.
A triangle with a cross over it means the item cannot be bleached.
A circle inside a square means you can tumble dry the garment.
The dots indicate temperature
- one dot for lower heat.
- two dots for higher heat.
A cross over this symbol shows you should not tumble dry the garment.
A circle means the garment is suitable for dry-cleaning.
A letter inside the circle is to tell the dry-cleaner which chemical wash and
method to use.
2
Contents
WASHING MACHINE
Wash Labels Explained, 2
GB
Washing Machine Description, 4,5
Wash Labels
Explained
Aquarius
Aquarius+
Programmes and Option Modifiers, 6-11
Contents
Special features
Option modifiers
Programme table
Starting a wash programme
A typical wash load
Automatic features
Troubleshooting, 12-13
Problems and solutions
Description
Safety Advice, 14
Disposal of old electrical appliances
Technical Details, 15
Service, 16
Programmes and
Option Modifiers
Before calling for assistance
Spare parts
Key Contacts
Troubleshooting
Safety
Advice
Technical
Details
Service
3
Washing Machine
Description
GB
Aquarius
Programme listing
Option
buttons
Detergent dispenser
drawer
Status indicator
lights
Variable Temperature
dial
Variable Spin Speed
dial
Start/Cancel
button
On/Off
button
Programme selector
dial
Aquarius control panel features
●
Programme listing: To consult a straight forward chart of the different programmes available.
●
Option buttons: To select the options available (see Programme Table and Option Modifiers).
●
Variable Temperature dial: To reduce the selected programmes wash temperature.
●
Variable Spin Speed dial: To reduce the selected programmes spin speed.
●
On/Off button: To turn the washing machine on and off.
●
Start/Cancel button: To start the programme or to cancel it, if incorrect settings were selected.
●
Programme selector dial: To select the programme you require. The knob stays still during the cycle.
●
4
Status indicator lights: Shows if the door is locked (when lit, the door cannot be opened) and the stage of
the programme that the machine has reached (wash, rinse or spin).
Washing Machine
Description
Aquarius+
Option
buttons
Status indicator
lights
Start/Cancel
button
On/Off
button
Wash Labels
Explained
Programme listing
GB
Digital display
Contents
Variable Temperature
button
Description
Detergent dispenser
drawer
Programme selector
dial
Variable Spin Speed
button
Programmes and
Option Modifiers
Aquarius+ control panel features
●
Option buttons: To select the options available (see Programme Table and Option Modifiers).
●
Variable Temperature button: To reduce the selected programmes wash temperature.
●
Variable Spin Speed button: To reduce the selected programmes spin speed.
●
Digital display: Shows time remaining, wash temperature and spin speed for the selected programme.
●
On/Off button: To turn the washing machine on and off.
●
Start/Cancel button: To start the programme or to cancel it, if incorrect settings were selected.
●
Programme selector dial: To select the programme you require. The knob stays still during the cycle.
Technical
Details
●
Safety
Advice
Programme listing: To consult a straight forward chart of the different programmes available.
Troubleshooting
●
Status indicator lights: Shows if the door is locked (when lit, the door cannot be opened) and the stage of
the programme that the machine has reached (wash, rinse or spin).
Service
5
Programmes and
Option Modifiers
GB
Special features
●
Fast Wash:
The Fast Wash programmes are designed for lightly soiled loads delivering quick results for smaller loads, using
less energy. For loads with stains or increased soil levels which require deeper cleaning, use the standard or
intensive wash cycles.
●
Cool Wash: 30˚C
A low temperature wash which delivers cleaning results comparable to the intensive 40˚C cotton programme but
at a lower temperature for more colour sensitive garments and using less energy.
●
Handwash:
A gentle action programme for delicate items and items labelled as hand wash only.
Not for Wool or Silk garments (use the special programmes for those materials).
●
Handwash Wool Approved: (M0507)
The wool wash cycle on Hotpoint machines has been tested and approved by the Woolmark company for washing
garments labelled as ‘hand wash’, provided that the ‘garments’ are washed in accordance to the instructions
issued by the manufacturer of this machine.
This cycle is selected by turning the Programme Selector dial to the wool programme and selecting the ‘Wash
Enhance’ option modifier (see Programme Table and Option Modifiers).
We recommend using a wool wash liquid when using Wool programmes.
●
Super Silent Wash:
Using the latest brush-less electric motors and damper technology the noise levels during the washing phase are
significantly lower than a conventional washing machine.
●
Aquarius+ Display
If time delay is selected this shows the time remaining until the start of the wash programme in hours – counting
down each hour.
It also displays time to end of the wash programme in hours and minutes counting down each minute. Please
note time can go up as well as down depending on load absorbency, size and water temperature.
Did you know?…
●
●
●
●
6
… when an option button is selected the corresponding light is illuminated.
… if the option selected is incompatible with the programme selected, the button will flash and the option
will not be enabled.
… if you set an option that is incompatible with an option selected previously, only the last option selected
will be enabled.
… Note: We DO NOT recommend the use of ACDO Colour Catcher sheets in your machine, as they can affect
the performance of the appliance.
Programmes and
Option Modifiers
Option modifiers
GB
●
●
●
Extra Rinse (Aquarius only):
Provides a full extra rinse to ensure the maximum possible detergent removal, particularly useful for people
with sensitive skin.
Time Delay (Aquarius+ only):
Use this option to delay the programme start by up to 24 hours. The display will show the delay chosen.
Each press of the button increases the Time Delay in increments of 1 hour. If you press the button again after
24 shows in the display the machine will reset the Time Delay and show ‘OFF’ in the display, pressing the
button after this will start the Time Delay selection from 1 hour. Once the countdown reaches zero the
programme will start.
Variable Temperature:
Use this option (if available on your model) to reduce the wash temperature below the maximum for the
programme you have chosen.
- Aquarius only, turn the dial to the reduced temperature required. When the programme has finished
reset the dial to 95. If the dial is left at maximum (95), the wash temperature will be the maximum for
the chosen programme.
- Aquarius+ only, each press of the button will reduce the wash temperature by 5˚C. The new wash
temperature will be shown in the display. If you press again after ‘OFF’ has been displayed, the
machine will revert to the original higher temperature.
Safety
Advice
Technical
Details
●
Mini Load:
Use this option for smaller loads less than the capacity listed for the material and programme type (see
Programmes Table). This option reduces water consumption and washing time, saving energy when washing
smaller loads.
Troubleshooting
●
Rinse Hold:
Selecting this option will pause the cycle in the final rinse with the fabric conditioner keeping the laundry fresh
until you are ready to complete the programme. The Rinse Hold light will flash to indicate the cycle is paused.
The machine will stay in this state, tumbling the load occasionally until either the Start/Cancel button is
pressed or the Rinse Hold button is pressed again to continue the cycle.
Programmes and
Option Modifiers
●
Reduced Creases:
Selecting this option will run the wash programme with a more gentle action and lower spin speed, in addition
to carrying out an additional rinse to ensure your laundry has fewer creases and will require less ironing.
Description
●
Wash Enhance:
Use this option to select a more intensive wash programme for the cotton 60˚C and cotton 40˚C for more
heavily soiled items. Additionally, use this option on the machine wash wool programme to select the special
Handwash wool programme for wool items that are not marked as machine washable. This cycle has been
approved by Woolmark for the Platinum Care award.
Contents
●
Wash Labels
Explained
Selecting options and their function
Service
Variable Spin Speed:
Use this option (if available on your model) to reduce the spin speed below the maximum for the programme
you have chosen.
- Aquarius only, turn the dial to reduced spin speed required. When the programme has finished reset
the dial to maximum. If the dial left at maximum, the spin speed will be the maximum for the chosen
programme.
- Aquarius+ only, each press of the button will reduce the spin speed. The new spin speed will be
shown in the display. If you press again after ‘OFF’ has been displayed, the machine will revert to the
original higher spin speed.
7
Programmes and
Option Modifiers
Programme Table
GB
*Programme setting for test in accordance with IEC 60456 and EN 60456
ID
Label Programme Type / Fabric
Description
Temp Max Load Approx
(˚C)
(kg)
Program
(h : min
A
P
Prewash
Mixed
A cool temperature cycle to loosen stains before selecting
a main wash programme.
30
7
0 : 25
B
95
Hygienic
White Cotton
For hard wearing heat resistant cotton and linen.
95
7
2 : 30
C
60
Superwash
Colourfast Cotton
An intensive cleaning programme for heavily soiled hard
wearing fabrics.
60
6
2 : 00
D
60
Everyday
Colourfast Cotton
For everyday cleaning needs for colourfast cotton or linen
fabrics.
60
6
1 : 40
D
60
Standard
An intensive cleaning, energy efficient cycle using the
Colourfast Cotton (IEC 60456*) maximum load capacity.
60
6
2 : 00
E
60
Fast Wash
Colourfast Cotton
A fast cycle for lightly soiled heat resistant cotton & linen
fabrics.
60
5
1 : 00
F
40
Everyday
Non Colourfast Cotton
For the everyday cleaning needs of cottons & other hard
wearing fabrics.
40
6
1 : 30
F
40
Intensive
Non Colourfast Cotton
A less energy efficient intensive 40˚C cycle for more
stubborn soiling.
40
7
1 : 45
G
40 -
Man-made fibres
A cycle designed to wash a variety of man-made fibres
Coloured Synthetics & Acrylics and fibre mixtures.
40
3.5
1 : 15
H
30
Cool Wash
Non Colourfast Cotton
Delivers the same performance as the intensive 40˚C
cycle but is more energy efficient at the expense of duration.
30
5
1 : 50
J
40 - -
Machine Washable
Wool
For machine washable wool and wool mixtures.
40
3
0 : 50
J
40 - -
Platinum Woolmark Approved
Handwash Wool
A special cycle for Hand Wash wool that will not shrink
your garments exclusively approved by Woolmark.
40
1
0 : 50
K
30 -
Machine Washable
Silk
For silk garments labelled as machine washable.
30
3.5
0 : 50
L
30
Fast Wash
Mixed
(not Wool/Silk/Handwash)
A very short refresh programme for lightly soiled mixed
fabrics.
30
3
0 : 30
M
H
Handwash
Delicates
(not Wool/Silk)
A gentle cycle for delicate items labelled as Hand Wash
only.
25
4
0 : 50
R&S -
Rinse & Spin
Mixed
This partial programme completes two full rinses and then
a slow spin.
-
3.5
0 : 35
FS
-
Fast Spin
Cotton
This partial programme completes the maximum speed
final spin.
-
7
0 : 20
SS
-
Slow Spin
Delicates
This partial programme completes the intermediate speed
final spin.
-
3.5
0 : 12
PO
D
Pump Out
All
This partial programme ensures the appliance is emptied
of water.
-
7
0 : 02
8
pproximate
Required Soil
rogramme Time Additional Level
h : min)
Option
Aquarius
Available Options
Aquarius+
Available Options
Recommended
Detergent
Time Delay
Ariel Bio Liquid
-
Heavy
-
-
: 30
-
Normal
Max
Rinse Hold, Mini Load,
Rinse Hold, Mini Load,
Extra Rinse
Time Delay
Ariel Bio Powder /
Tablets
Reduce Creases, Rinse Hold
Reduce Creases, Rinse Hold
Ariel Colour
Mini Load, Extra Rinse
Mini Load, Time Delay
Wash Enhance, Reduce Creases
Wash Enhance, Reduce Creases
Rinse Hold, Mini Load, Extra Rinse
Rinse Hold, Mini Load, Time Delay
: 00
: 40
-
-
Heavy
Light to
Normal
Max
Max
Ariel Colour
Wash
Enhance
Normal to Max
Heavy
Extra Rinse
Time Delay
Ariel Colour
: 00
-
Light
Reduce Creases, Rinse Hold
Reduce Creases, Rinse Hold
Ariel Colour
Mini Load, Extra Rinse
Mini Load, Time Delay
Wash Enhance, Reduce Creases
Wash Enhance, Reduce Creases
Rinse Hold, Mini Load, Extra Rinse
Rinse Hold, Mini Load, Time Delay
: 30
-
Light to
Normal
Max
Ariel Colour
Wash
Enhance
Heavy
Max
Extra Rinse
Time Delay
Ariel Colour
: 15
-
Normal
800
Reduce Creases, Rinse Hold
Reduce Creases, Rinse Hold
Ariel Colour
Mini Load, Extra Rinse
Mini Load, Time Delay
-
Normal to Max
Heavy
Rinse Hold, Mini Load
Rinse Hold, Mini Load
Extra Rinse
Time Delay
Programmes and
Option Modifiers
: 45
: 50
Description
: 00
1200
Contents
: 25
GB
Wash Labels
Explained
Spin
Speed
Ariel Colour Liquid
800
Wash Enhance
Wash Enhance, Time Delay
Dreft
: 50
Wash
Enhance
Normal
1000
-
Time Delay
Dreft
: 50
-
Normal
800
Rinse Hold
Rinse Hold, Time Delay
Dreft
: 30
-
Light
800
Extra Rinse
Time Delay
Ariel Colour Liquid
: 50
-
Normal
800
-
Time Delay
Ariel Colour Liquid
: 35
-
-
800
Reduce Creases, Rinse Hold
Reduce Creases, Rinse Hold
-
Mini Load, Extra Rinse
Mini Load, Time Delay
-
-
Max
-
Time Delay
-
: 12
-
-
800
-
Time Delay
-
: 02
-
-
-
-
-
-
Service
: 20
Technical
Details
Normal
Safety
Advice
-
Troubleshooting
: 50
9
Programmes and
Option Modifiers
GB
Starting a wash programme
Operating the machine
●
On-Off / Selecting a programme:
1.
2.
3.
4.
5.
6.
●
Switch the machine on by pressing the On/Off button.
Load your laundry into the machine and shut the door.
Add the detergent and any fabric softener.
Turn the programme selector dial to the required programme.
Select any options you require (see Option Modifiers).
Press the Start/Cancel button to start the programme.
To stop or change a programme:
1.
2.
3.
4.
Press the Start/Cancel button for 3 seconds.
Select ‘Pump Out’
on the programme selector dial.
When the machine has finished emptying, turn the programme selector dial to the new programme required.
You may need to add detergent.
Press the Start/Cancel button to start the programme.
A typical wash load
Two examples of maximum wash loads for different types of fabric:
COTTON
Bath Towels
Hand Towel
Shirts
Blouses
Sets of Pyjamas
Items of
Underwear
2 T-Shirts
SYNTHETIC
2
1
6
6
2
12
= 7kg
4 Items of
Sports wear
4 Shirts
4 Blouses
1 Set of Pyjamas
8 Items of
Underwear
= 3.5kg
Did you know that with Hotpoint and Ariel you’ll get the best washing results?
Certain laundry products work better in some machines than others. At Hotpoint we know this is
true because we’ve done the research to prove it.
We used real everyday clothes and ran tests to find out which washing powder works best with
Hotpoint. The results proved that Hotpoint and Ariel produces the best washing results on all your
clothes.
Ariel can meet all your laundry needs. It’s available as a biological powder for everyday wash
loads. Colour powder to keep your clothes staying brighter for longer and a Non-Bio powder for
when you need brilliant cleaning but are concerned about sensitive skin.
10
Programmes and
Option Modifiers
Automatic features
GB
Wash Labels
Explained
Unbalanced load detection
The machine has an inbuilt feature to prevent it from spinning too fast with an unbalanced load.
When an unbalanced load is detected, the machine will attempt to redistribute the load in order to
balance it evenly to achieve full spin speed.
Contents
If this is not possible and an unbalanced load remains the spin speed will be reduced, depending on the
amount of unbalance detected. This is to prevent the machine from damaging itself or its surroundings and to
prevent excessive noise from the machine.
If the spin result is unsatisfactory following a reduced spin speed attempt to rectify the unbalanced load, then on
completion of the programme the load can be redistributed evenly in the drum by hand. Select a spin cycle.
Description
Note: Do not attempt to spin heavy or absorbent single items as the machine cannot distribute these evenly.
If you need to wash a single item you will need to add some other items as ballast to allow the machine to distribute
the load evenly throughout the drum.
No water detection
Programmes and
Option Modifiers
The machine will automatically detect if it cannot take in water and will notify you by flashing the Prewash light.
If this occurs please check the appliance is plumbed in correctly (see Installation Guide) and the water supply is
turned on as described in the installation guide that accompanies this booklet.
Troubleshooting
Safety
Advice
Technical
Details
Service
11
Troubleshooting
GB
If your machine seems not to be working, go through the following troubleshooting suggestions before you call your
Service Centre (see Service).
Problem:
Possible causes / Solution:
The machine won’t start?
●
●
●
●
The wash cycle won’t
start?
●
●
●
●
●
The machine fails to fill
with water?
The machine does not
drain or spin?
●
●
●
●
●
●
●
The machine makes a
noise or vibrates too much
during the spin cycle?
●
●
●
●
The machine leaks?
●
●
●
●
12
Check the appliance is fully plugged into the socket and switched on.
Is the socket ok? Try another appliance in the socket to check.
Is the fuse in the plug ok? If not, replace it (see Care and Maintenance).
There has been a power failure.
The appliance door is not shut properly.
The ON/OFF button has not been pressed.
The Start/Cancel button has not been pressed for at least 3 seconds.
The cold water supply tap is not turned on.
Aquarius+ only: H20 is displayed.
Aquarius+ only: Have you selected Time Delay (see Programmes and
Option Modifiers).
The Start/Cancel button has not been pressed, for at least 3 seconds.
Is the ‘Prewash’ indicator light flashing? This indicates the machine cannot
take in water (see Installation), check:
The cold water inlet hose is connected to the tap.
The hose is kinked.
The cold water supply tap is not turned on.
There is a water shortage.
The water pressure is insufficient.
There has been an unbalanced load and the machine could not spin
(see ‘Automatic Features’, Programmes and Option Modifiers).
Has the drain hose been installed correctly (see Installation)?
Are the drain hose, standpipe or undersink connections blocked?
Has the ‘Rinse Hold’ option been selected? ‘Rinse Hold’ indicator light will
flash. To complete the paused programme press either the Start/Cancel
button or the ‘Rinse Hold’ button (see Programmes and Option Modifiers).
Aquarius only: (if available on your model) Has the Variable Spin Speed
dial been set to ‘No Spin’ (see Programmes and Option Modifiers).
The transit fixings were not removed correctly (see Installation).
The washing machine is not level (see Installation).
The washing machine is closed in, between furniture cabinets and the
wall (see Installation).
Check all loose items, such as coins were removed from the laundry.
The cold water inlet hose is not connected correctly (see Installation).
Is your water pressure within limits (see Installation)?
The drain hose is not secured properly or is blocked (see Installation).
The detergent dispenser is obstructed, clean it (see Care and Maintenance).
Troubleshooting
Problem:
Steam is coming from the
dispenser drawer
●
●
●
●
●
●
●
●
The display shows: ‘F000’
Aquarius+ only:
●
●
Check the drawer is properly aligned.
Clean the dispenser drawer (see Care and Maintenance).
Check the cold water supply tap is turned on fully.
Check the water inlet hoses are not kinked.
The water pressure is insufficient.
Troubleshooting
The display shows: ‘door’
Aquarius+ only:
The detergent is not suitable for machine washing:
If you have used the wrong type of detergent, select a Rinse programme
to flush out your machine.
You used too much detergent (see Detergent and Laundry):
Refer to the manufacturer’s recommendations.
Programmes and
Option Modifiers
Not all the detergent has
been flushed away?
●
This is not a fault, we have designed the machine to release steam from
the dispenser drawer during hot washes.
Description
The detergent dispenser
will not close properly or is
collecting water?
Check for low water pressure.
Programme times listed in the Programme Table are approximate.
Options selected can affect the programme times (see Programmes and
Option Modifiers).
Contents
There is too much foam?
●
GB
Wash Labels
Explained
The programme takes a
long time.
Possible causes / Solution:
The door is not fully closed, please close fully to start cycle.
Where 000 is the number (please contact Hotpoint Service and quote the
number).
Safety
Advice
Technical
Details
Service
13
Safety Advice
GB
●
●
This machine is designed for domestic use only.
Before using your machine make sure that the two transit bolts and spacers have been removed
(see Installation Guide).
●
Any electrical work necessary to install this machine should be carried out by a qualified electrician.
●
Do not plug your machine into a socket when your hands are wet.
●
Do not try to modify this machine in any way.
●
Do not let children play with the machine or with its controls.
●
Do not lean on the door or use the door to lift or move the machine.
●
Do not wash garments that have previously been treated with solvents.
●
Do not connect the machine to a single outlet instantaneous water heater.
●
●
Do not connect the machine directly to a water-softening unit; use the recommended amount of detergent for the
water hardness in your area.
Do not overload or underload the machine. In addition to reducing the quality of the wash, this may also damage
your laundry and the machine.
●
Do not pull on the power supply cable to unplug the appliance from the electricity socket. Pull the plug out.
●
Do not touch the drain water as it could reach very high temperatures (over sink drainage).
●
●
●
●
14
Never force the machine door; this could damage the safety lock mechanism design to prevent any accidental
opening.
In the event of a malfunction, do not under any circumstances touch internal parts in order to attempt repairs.
Should it have to be moved, proceed with the help of two or three people and handle it with the utmost care.
Never try to do this alone, because the appliance is very heavy.
Before loading your laundry into the machine, make sure the drum is empty.
Technical Details
Technical details chart
GB
59.5 cm width
85 cm height
60 cm depth
Capacity
From 1 to 7 kg
Electric Connections
Voltage 220/240V 50Hz
Max absorbed power 1700W-2100W
Spin Speed
up to 1600 rpm - WT760
up to 1400 rpm - WT745, WT740, WT540
Description
Dimensions
Contents
WT760, WT745, WT740 and WT540
Wash Labels
Explained
Model numbers
Programmes and
Option Modifiers
Control programme
60˚C cotton (programme D)
according to IEC60456 with Wash Enhance
run with a 7 kg load
This appliance is compliant with the following European Community
Directives:
Troubleshooting
- 72/23/EEC & 93/68/EEC (Low Voltage) and subsequent amendments.
- 89/336/EEC,92/31/EEC & 93/68/EEC (Electromagnetic Compatibility)
and subsequent amendments.
Safety
Advice
Technical
Details
Service
15
Service
195050592.01
11/2005 - SIMLEX . Four Ashes, Wolverhampton
GB
Before calling the Service Centre:
Use the troubleshooting guide to see if you can solve the problem yourself (see Troubleshooting).
If not, turn off the machine and call the Service Centre closest to you.
You will be charged for a service engineers visit if a problem with your machine is caused by incorrect installation
or misuse.
●
●
Spare Parts
This is a complex machine. Repairing it yourself or having a non-authorised person try to repair it could cause harm
to one or more persons, could damage the machine and could invalidate the spare parts warranty.
Call an authorised technician if you experience problems while using the machine.
The spare parts have been designed exclusively for this appliance and not for other uses.
Key Contacts
After Sales Service
Over 1100 trained specialists, directly employed by us, ensure that you can have
complete confidence in both the appliances and services we offer.
Repair Service and Information Help Desk
UK: 08709 066 066
Monday to Friday, 8am to 7.30pm
Saturday, 8.30am to 5.30pm
Sunday, 9.30am to 3.30pm
www.hotpointservice.co.uk
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number
Serial number
Date of purchase
Model number and Serial number can be found on the inside of the door.
Extended Warranties
UK: 08709 088 088
Monday to Sunday, 8am to 8pm
www.hotpointservice.co.uk
Republic of Ireland: 1850 502 200
Service
Genuine Parts and Accessories
UK: 08709 077 077
Monday to Friday, 8.30am to 5pm
Saturday, 8.30am to 12noon
www.hotpointservice.co.uk
Republic of Ireland: (01) 842 6836
www.hotpoint.co.uk
Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB

advertisement

Key Features

  • Fast Wash program for smaller loads and quick results
  • Cool Wash option for cleaning at lower temperatures
  • Handwash program for delicate items
  • Handwash Wool program approved by the Woolmark company for washing wool garments
  • Super Silent Wash feature minimizes noise levels during the washing phase
  • Extra Rinse option for maximum detergent removal
  • Rinse Hold to pause the cycle before the final spin
  • Variable Temperature and Spin Speed options to customize the wash settings

Related manuals

Frequently Answers and Questions

What is the maximum load capacity of the Hotpoint WT745?
The maximum load capacity is 7kg.
Can the Hotpoint WT745 handle delicate fabrics?
Yes, it has a Handwash program for delicate items.
Does the Hotpoint WT745 offer any energy-saving features?
Yes, it has a Fast Wash program for smaller loads and a Cool Wash option for cleaning at lower temperatures.
Can I adjust the spin speed on the Hotpoint WT745?
Yes, it has a Variable Spin Speed option to customize the spin speed.
How do I use the Rinse Hold feature on the Hotpoint WT745?
Select the Rinse Hold option to pause the cycle before the final spin.
Download PDF

advertisement