polkaudio - BrandsMart USA

polkaudio - BrandsMart USA
Instant Home TheaterTM
Contents • Contenus • Contenido
L [] G I c ··
···~ -.
1 er
Note: Remove cap prior to inserting cable.
VVa!! Mount • Support
Note: Retirer le capuchon avant d'inserer les cables.
Nota: Qu ite Ia tapa antes de insertar el cable
~ ~ ~~~~ ~~~ ~
Note importante: Les commutateurs
; :!j.i
Important Note: The CHANNEL 10 switches
must be set to the same number.
• M ontaje En La Pared
~-------- 0 --------~
Surro und Bar 4000
31 " W (78.7 4 em )
uCHANNEL ID>) doivent 8tre n§gl9es
au meme numero.
Nota importante: Los selectores de identidad
de canal (CHANNEL 10) deben fijarse en el
mismo nUmero.
3 3/4" H (9.53 em )
Keyhole Slots
Fentes en trou de serrure
Ranuras en forma de ojo
de eerradura
16 3/4" W (42 .55 em )
SUB Volume Up and Down l + / -) :
Adjusts the volume of the subwoofer.
Volume Sub ( + I- ):
Regie le volume du subwoofer.
Subida y bajada de volumen del subwoofer
!SUB,+ /-1: A1usta e1 volumer de subwooter
For a more comprehensive explanation and a full listing of hookup and
setup options, consult your owner's manual which can be found online
at www.polkaudio.com .
Pour des explications plus dtHailh~es et une liste complete des options
de connexion et d' in stallation, consultez le manuel d'utilisation disponible
en ligne 8: www.polkaudio.com.
Para ver una explicaci6n mas extensa y una lista completa de opciones
de cableado y configuraciOn, consulte el manual del propietario que
se encuentra en lrnea en www.polkaudio.com .
Polk Audio Customer Service 1·800-377-7655 (M·F, 9-5:30 ET, USA & Canada only)
or via email polkcs@polkaudio.com. (Worldwide: 1-410-358-3600). To learn more
about the Polk Audio SurroundBa f3 4000 Instant Home Theater"" and other
Polk Audio products. go to w...vw.polkaud io.com .
Service a Ia Clientele Polk Audio: 1·800-377-7655 (lun. au ven., 9-17 30 HE, E.-U. et Canada
seulement.lnternational: 1·410-358-3600) ou par courriel: polkcs@polkaudiO com. Pour
plus d'information sur le Polk Audio Surround Bare 4000 Instant Home Thea ter"" et autres
produits Polk Audio. viSitez: www.polkaudo.com.
Servic ar ,erne de f
-800·3:'7-7655 19 a 5:30. hera Este. de k.nes
,) v1er,..•~s :;;..., .., e
'-td::1os Un1d1 v Canaai:\1, 1-410-358-3600 (en todo el mundol
o fJI kcs:it)Jolkaudir :om Pa'"a obterer r""'18s mfor Maci6n sabre el cille e'"~ casa
rnstan!tmeo 1-"lstant Home Thea:er con barre de altavoces SurroundBar:~ 4000
y oun:; proouc :os de PolK A.Jdi0 vava a "''M'W polkaudro com
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are registered trademarks of Dolby laboratories.
Fabrique sous license de Dolby laboratories Dolby et le symbole double-D sent
des marques de commerce deposees de Dolby laborawries
Fabr1 ;c~r. ba J licencr~ de Dolby _abo,atorres Doloy y el simbolo de Ia dob:e 0
son marcas cornerc ales regrstraoas de Dolby labor atones
How to program the SurroundBar® 4000 Instant
Home Theater™ to work with your existing remote:
(Example shown is for "Volume Up" control.)
Important Note: If adjusting your TV's volume also adjusts the
volume of your SurroundBar 4000, then following the instructions
below is not necessary. Your remote will control the SurroundBar 4000
without programming.
Programming Instructions: Your SurroundBar 4000 is currently programmed
to respond to the remote control that is included with the product. However,
we strongly recommend that you program the SurroundBar 4000 to also
respond to your existing remote control using the steps illustrated below
thereby enabling you to operate everything using a single remote.
Press and hold "LEARN"
on the SurroundBar 4000
until the LED blinks orange.
0 0 0
Press "Volume Up" ( A. ).
LED turns orange.
While holding your TV's remote
within 1-2 feet of the bar, quickly
tap the "Volume Up" ( A. ) button
4 times. With each tap the status
LED should blink quickly (like
a strobe). After the 4th button
press the status indicator LED
should blink green (about
once per second).
Repeat steps 1-3 to program Volume ( 'V I A. ), Mute and Power buttons ( 0
Polk Audio Customer Service 1-800-377-7655 (M-F, 9-5:30 ET, USA & Canada only)
or via email polkcs@polkaudio.c om. (Worldwide: 1-410-358-3600).
Instant Home Theater™
My TV does not have an optical output.
How do I connect my audio?
You have several options for connecting your audio:
• Use the optical output of your source unit (cable/satellite box,
DVD ptayer, etc.) and connect directly to the Surround Bar 4000
using the supplied optical cable.
• Use the 1/8" (3 .5mm) analog I headphone output of your 1V
(if available) and connect directly to the SurroundBar 4000
using the supplied 1/8" (3.5mm) to 1/8" (3.5mm) analog cable.
• Use the RCA audio outputs (white/red pair) on your 1V
(if available) and connect directly to the SurroundBar 4000
using the supplied 1/8" (3.5mm) to 1/8' (3.5mm) analog
cable and 1/8" (3.5mm) to RCA adapter.
What if my provided optical cable is too short?
• We did our best to provide an adequate sized cable; however,
there might be a few setup instances in which the cable may
be too short. If that is your situation, your local electronics
store will have cables that meet your required length.
Why am I not hearing any sound from my SurroundBar 4000
when using the provided (optical) cable?
• The Surround Bar 4000 is expecting the audio to be in Dolby®
Digital or 2-channel format. You may need to change your 1V
or cable/satellite box audio settings accordingly.
My audio sounds strange and distorted.
• Your SurroundBar 4000 requires a clean, unaltered signal for
proper audio performance. If the sound from your Surround Bar
4000 is strange or distorted, then check the audio menus of
whatever source(s) are connected to your SurroundBar 4000
and make sure any audio processing is turned off.
Why can't I successfully program the SurroundBar 4000
to respond to my remote control?
How do I control the SurroundBar 40007
There are three ways to control your Surround Bar 4000:
1. Use the touch-sensitive buttons on the front of the bar.
2. Use the provided remote control.
3. Program the SurroundBar 4000 to respond to your existing
remote (see included instructions).
My SurroundBar 4000 was responding to commands,
but now it isn't. What should I do?
• In this rare event, simply turn off the power (switch located
on the back of the bar), wait a few seconds, and then turn
the power back on. This should restore control.
How do I erase previously learned remote control commands?
• If you have programmed your Surround Bar 4000 to respond
to a remote control and you no longer want it to do so, then
you can erase the codes by pressing the LEARN key for about
two seconds while the unit is in standby mode (power LED
is red) . The SurroundBar 4000 w ill continue to respond
to the provided credit card remote control.
Can I adjust the subwoofer level control from the bar
keypad if I cannot locate the provided remote control?
• Yes. You can control the subwoofer volume from the bar
keypad by tapping the LEARN button prior to using the
volume buttons. When you are done with the adjustment
tap the LEARN button again.
To contact Customer Service:
• If you have a question or comment, please feel free to call
us or email us. In North America and Canada, call Polk Audio
Customer Service: 800-377-7655 (M-F 9-5:30 EST) or via email
polkcs@polkaudio.com. Outside the US, call41 0-358-3600.
• There are many remote control formats, and we have done
our best to make the Surround Bar 4000 compatible with the
most popular brands. However, there are likely some cases
in which the bar will not be able to learn your remote codes.
In this case, please use the remote control provided with
the SurroundBar 4000 product or try a different universal
remote control.
5601 Metro Drive
Baltimore, MD21215
This is your Product Model and Serial Number.
Enter this number in the "Serial Number" space
when registering your product online. Keep
this card handy for Model and Serial Number
reference when calling Polk Customer Service.
Regis ter Your New Polk Audio Product
Onlin e NOW for aChance to win
$500 of Polk Product
.,... Creates a permanent record of your purchase, in case you misplace your original receipt.
.,... Enters you in our monthly FREE drawing for $500-worth of Polk Audio Speakers.
.,... Allows you to enroll in Club Polk: for informative Polk We~site Forums, special discounts
in the Polk Webstore, advance notice of Polk Promos, and discounts on Authorized
Polk Audio parts. ·
.,... Keeps you up to date when there is news and announcements about your product.
.,... Gives you the option to "opt-in" for Polk Audio's Audio Enjoyment Enhancers:
Our Monthly Emails, with news, reviews and tips on everything audio; and our
FREE Polk Audio Newspaper.
We take your privacy seriously. Polk Audio does not share or sell
information to any other parties, unless directed by court order.
Registering your product has no effect on your warranty.
Warranties apply as stated in your product manual.
Please be sure to keep your original purchase receipt.
No Internet access? Call Polk Audio cu·stomer Service
(US & Canada only). Outside the US &
Canada, call 410-358-3600. We'll walk you through the
simple registration process!
Questions? Concerns? Contact Polk Audio Customer Service, 9am - &pm, M-F, EST (USA)
800-377-7655 US & Canada only • 410-358-3600 outside US & Canada • polkcs@polkaudio.com
Instant Home Theater™
This product was designed and manufactured to meet'strict quality and safety standards.
There are, however, some installation and operation precautions which you should
be particularly aware of.
d.lf the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions, as an improper adjustment of other controls may result
in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation.
1. Read Instructions. All the safety and operating instructions should
be read before the system is operated.
e. II the product has been dropped or the cabinet has been damaged.
2. Retain Instructions. The safety and operating instructions should
be retained for future reference.
3. Heed Warnings. All warnings on the appliances and in the operating
instructions should be adhered to.
4. Follow Instructions. All operating and use instructions should be followed.
5. Cleaning. Unplug the appliance from wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
f. When the product exhibits a distinct change in performance this indicates
a need for service.
19. Replacement Parts. When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or that
the parts have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
CAUTION: Danger of EXPLOSION if battery is incorrectly replaced.
6. Attachments. Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture. Do not use these appliances near water for example,
near a bath tub, washbowl, kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
8. Accessories. Do not place these appliances on an unstable cart, stand, tripod, bracket,
or table. The audio/video products may fall, causing serious injury to a child or adult,
and serious damage to the products. Use only with a cart, stand, tripod, bracket.
or table recommended by the manufacturer, or sold with the appliances. Any mounting
of the appliances should follow the manufacturer's instructions, and should use mounting
accessories recommended by the manufacturer.
9. Ventilation. Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the appliances and to protect them from overheating, and these openings
must not be blocked or covered. The openings should never be blocked by placing the products
on a bed, sofa, rug, or other similar surface. This product should never be placed near or over
a radiator or heat register. This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.
Repalce only with the same or equivalent type.ICR2032)
WARNING: Do not expose batteries or battery pack to excessive
heat such as sunshine, fire or the like.
20. Safety Check. Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that
the products are in proper operating condition.
22. This product is not intended for use outdoors.
The CAUTION marks shown here are located on the back of your SurroundBar® Speaker System
10. Power Sources. This product should be operated only from the type of power source
indicated on the marking labels. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company.
11 . Grounding or Polarization. This product is equipped with polarized alternating-current
line plugs !plugs having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug.
Carts and Stands. The appliances should be used only with a cart or stand
that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to overturn.
Use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, insert fully.
CAUTION: No naked flame sources, such as
candles, should be placed on the apparatus.
Class B Emissions Limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Operation is subject to the following two conditions:
12. Power Cord Protection. Power-supply cord should be routed so that it is not likely to be walked
on or pinched by items placed upon or against it, paying particular attention to cords at plugs,
convenience receptacles. and the point where they exit from the appliances.
13. Lightning. For added protection for this audio/video product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightning and power-line surges.
Product Disposal
This device may not cause interference, and
This device must accept any interference, including interference
that may cause undesired operation of the device.
14. Power Lines. An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them might be fatal.
Certain international, national and/or local laws and/or regulations may
apply regarding the disposal of this product For further detailed information,
please contact the retailer where you purchased this product or the Polk
Audio Importer/ Distributor in your country. A listing of Polk Audio Importer/
Distributors can be found on the Polk Audio website www.polkaudio.com or
by contacting Polk Audio at: 5601 Metro Drive, Baltimore, Maryland 21215,
USA. Phone +1-410-358-3600 or 1-800-377-7655.
15. Overloading Do not overload wall outlets and extension cords as this can result
in a ri sk of fire or electric shock.
16. Object and Liquid Entry. Never push objects of any kind into this product through openings,
as they may touch dangerous voltage points or short out parts that could result in a fire
or electric shock. Never spill liquid of any kind on this audio/video product
17. Servicing. Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
18. Damage Requiring Service. Unplug this product from wall outlets and refer servicing
to qualified service personnel under the following conditions
a. When the power supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the product
c.II the product has been exposed to rain or water.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its
stated expiration if the original retail purchaser sells or transfers the Product to any other party. Polk Audio, Inc, warrants,
to the original retail purchaser only, that the LOUDSPEAKER($). PASSIVE CROSSOVER COMPONENT($) and ENCLOSURE
on this Polk Audio Loudspeaker Product will be free from defects in material and workmanship for a period of three (3) years
from the date of original retail purchase from a Polk Audio Authorized Dealer. Furthermore, Polk Audio, Inc., warrants, to the
original retail purchaser only, that any AMPLIFIER OR OTHER ELECTRONIC COMPONENT that may be included in this Polk Audio
Loudspeaker Product will be free from defects in material and workmanship for a period of one (1) year from the date of original
retail purchase from a Polk Audio Authorized Dealer. To allow Polk Audio to offer the best possible warranty service, please
fill out the Product Registration Card(s) and send it to the Factory at the address provided on the Product Registration Card(s)
within ten (1 0) days of the date of original purchase. Defective Products must be shipped, together with proof of purchase,
prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to the Factory at 1 Viper Way,
Vista, California 92081. Products must be shipped in the original shipping container or its equivalent; in any case the risk
of loss or damage in transit is to be borne by you.
If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials
or workmanship at any time during this Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option,
repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become
the property of Polk Audio. Products replaced or repaired under this warranty will be returned to you, within a reasonable
time, freight prepaid. This warranty does not include service or parts to repair damage caused by accident, disaster, misuse,
abuse. negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defect in materials or workmanship, or service,
repair, or modification of the Product which has not been authorized or approved by Polk Audio. This warranty shall
terminate if the serial number on the Product has been removed, tampered with or defaced.
This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted
above, your sole remedy shall be repair or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for
any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc, or a Polk
Audio Authorized Dealer, has been advised of the possibility of such damages, or for any claim by any other party. Some states
do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you.
All implied warranties on this Product are limited to the duration of this expressed Warranty Some states do not allow limitation
on how long an implied Warranty lasts, so the above limitations may not apply to you. This Warranty gives you specific legal
rights, and you also may have other rights which vary from state to state. This Warranty applies only to Products purchased
in the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio clubs.
The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio
Authorized Distributors in such countries.
Thank you for your Polk Audio purchase. If you have a question or comment, please feel free to call us or email
us. In North America and Canada, call Polk Audio Customer Service 800-377-7655 (M-F, 9-5:30 EST) or via email
polkcs@polkaudio.com. Outside the US, call 410-358-3600.
Polk Audio loudspeakers and subwoofers are capable of playmg at extremely hrgh volume levels,
which could cause senous or permanent heanng damage. Polk Audio, Inc. accepts no liability for
hearing loss, bodily injury or property damage resulting from the misuse of its products.
Keep these guidelines in mind and always use your own good judgment when controlling volume:
• You should limit prolonged exposure to volumes that exceed 85 decibels( dB).
Refer to the Occupational Health and Safety Administration (OSHA) guidelines at:
5601 Metro Drive
Baltimore, MD 21215
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF