Genuine Restek Replacement Parts Catalog for Agilent GCs

Genuine Restek Replacement Parts Catalog for Agilent GCs
Genuine Restek Replacement Parts
Agilent GCs
More Parts & Accessories
for More GC Systems
Agilent • Bruker/Varian • PerkinElmer • Shimadzu • Thermo Scientific • And More!
Pure Chromatography
www.restek.com
More Parts & Accessories
for More GC Systems
Agilent • Bruker/Varian • PerkinElmer • Shimadzu • Thermo Scientific • And More!
Table of Contents
Dear Colleague,
Restek’s GC Accessories Team is devoted to bringing
you the highest-quality products, delivered on time
every time, to help you maximize data reproducibility
and minimize instrument downtime—regardless of
which brand of instrument you use. From our exceptionally inert Restek Premium inlet liners on the right
to our convenient EZ Twist Top® injection ports on
page 16, Genuine Restek Replacement Parts are
designed to meet or even exceed GC manufacturers’
already-strict specifications and performance
requirements. And of course, as with all Restek
products, we also offer exemplary Plus 1 service
before and after you order.
Do you have a product suggestion
or question about Restek’s GC
accessories? Feel free to contact
one of our team members or your
Restek representative today. We
look forward to hearing from you!
Sincerely,
Scott Adams
Business Manager
Gas Chromatography
Scott Adams
Business Manager
Gas Chromatography
e-mail us at [email protected]
?
Restek Premium Inlet Liners..................................................................1–3
Other Deactivations.......................................................................................4
Other Inlet Liners........................................................................................5–7
Inlet Liner Packing Materials.......................................................................8
Inlet Liner Accessories...................................................................................9
Leak Detector ................................................................................................10
Flowmeter ......................................................................................................11
O-Rings, Septa, Seals............................................................................12–13
Injectors............................................................................................................13
Inlet Seals..................................................................................................14–15
Injection Ports & Supplies..................................................................16–19
Instrument Replacement Parts........................................................20–21
Tools...................................................................................................................22
Dual Column Analysis.................................................................................23
Packed Column Accessories....................................................................24
GC-MS Accessories................................................................................25–27
FID Accessories.......................................................................................28–31
NPD, ECD Accessories & Cables..............................................................31
Autosampler Replacement Parts...........................................................32
Nuts....................................................................................................................33
Column Installation Tools.........................................................................34
Ferrules......................................................................................................35–36
Connectors...............................................................................................37–40
Vial Accessories.............................................................................................41
Vials.............................................................................................................42–45
Syringes.....................................................................................................46–47
Fittings & Fitting Kits............................................................................48–50
Super-Clean Gas Filters..............................................................................51
Part Number Cross-Reference..........................................................52–53
How can we help you today? Contact us…
customerservice: 1-814-353-1300 (ext. 3)
technicalservice: 1-814-353-1300 (ext. 4) | e-mail: [email protected]
3 ways toorder
1. CALL: 1-800-356-1688 (ext. 3) or 1-814-353-1300 (ext. 3)
Monday–Friday 8:00 a.m.–6:00 p.m. Eastern Time
2. FAX: 1-814-353-1309 24 hours a day
3. ONLINE: www.restek.com 24 hours a day
Outside the U.S.? Find a distributor at
www.restek.com/distributor
Coming to Your Lab in 2017:
The next level of
True Blue Performance
Contact your local Restek representative for more information.
Restek Premium Inlet Liners
Restek Premium Inlet Liners for Agilent GCs
Splitless
for Agilent GCs
ID
OD x Length
Liners
Similar to Agilent part #
5181-8818 (ea.)
5183-4703 (5-pk.)
5183-4704 (25-pk.)
ea.
cat.#
5-pk.
25-pk.
23313.1
23313.5
23313.25
Restek Premium 2 mm Splitless
2.0 mm
6.5 mm x 78.5 mm
Restek Premium 2 mm Splitless w/Wool
2.0 mm
6.5 mm x 78.5 mm
23314.1
23314.5
23314.25
Restek Premium 2 mm Single Taper
2.0 mm
6.5 mm x 78.5 mm
23315.1
23315.5
23315.25
Restek Premium 2 mm Single Taper w/Wool
2.0 mm
6.5 mm x 78.5 mm
23316.1
23316.5
23316.25
Restek Premium 4 mm Straight
4.0 mm
6.3 mm x 78.5 mm
23301.1
23301.5
23301.25
Restek Premium 4 mm Straight w/Wool
4.0 mm
6.3 mm x 78.5 mm
23300.1
23300.5
23300.25
Restek Premium 4 mm Single Taper
4.0 mm
6.5 mm x 78.5 mm
23302.1
23302.5
23302.25
Restek Premium 4 mm Single Taper w/Wool
4.0 mm
6.5 mm x 78.5 mm
23303.1
23303.5
23303.25
Restek Premium 4 mm Double Taper
4.0 mm
6.5 mm x 78.5 mm
23308.1
23308.5
23308.25
Restek Premium 4 mm Cyclo Double Taper
4.0 mm
6.5 mm x 78.5 mm
23310.1
23310.5
23310.25
ea.
cat.#
5-pk.
25-pk.
23333.1
23333.5
23333.25
23300.1
23300.5
23300.25
23305.1
23305.5
23305.25
23312.1
23312.5
23312.25
ea.
cat.#
5-pk.
25-pk
23300.1
23300.5
23300.25
23309.1
23309.5
ea.
cat.#
5-pk.
25-pk.
23306.1
23306.5
23306.25
Split Liners
for Agilent GCs
ID
OD x Length
210-3003 (ea.)
210-3003-05 (5-pk.)
19251-60540 (ea.)
5183-4691 (5-pk.)
5183-4692 (25-pk.)
5181-3316 (ea.)
5183-4695 (5-pk.)
5183-4696 (25-pk.)
5062-3587 (ea.)
5183-4693 (5-pk.)
5183-4694 (25-pk.)
5181-3315 (ea.)
5183-4705 (5-pk.)
5183-4706 (25-pk.)
Similar to Agilent part #
Restek Premium 1 mm Split
1.0 mm
6.3 mm x 78.5 mm
Restek Premium 4 mm Straight w/Wool
4.0 mm
6.3 mm x 78.5 mm
18740-80200 (ea.)
19251-60540 (ea.)
5183-4691 (5-pk.)
5183-4692 (25-pk.)
Restek Premium 4 mm Precision Liner w/Wool
4.0 mm
6.3 mm x 78.5 mm
210-4004-5 (5-pk.)
Restek Premium 4 mm Cyclosplitter
4.0 mm
6.3 mm x 78.5 mm
Split/Splitless Liners
for Agilent GCs
ID
OD x Length
Restek Premium 4 mm Straight w/Wool
4.0 mm
6.3 mm x 78.5 mm
Restek Premium Low Pressure Drop Precision Liner w/Wool
4.0 mm
6.3 mm x 78.5 mm
Direct Injection Liners for Agilent GCs
(for 0.25/0.32/0.53mm ID Columns)
Similar to Agilent part #
19251-60540 (ea.)
5183-4691 (5-pk.)
5183-4692 (25-pk.)
ID
OD x Length
Similar to Agilent part #
Restek Premium Drilled Uniliner (hole near bottom)
4.0 mm
6.3 mm x 78.5 mm
G1544-80730 (ea.)
Restek Premium Drilled Uniliner (hole near bottom) w/Wool
4.0 mm
6.3 mm x 78.5 mm
23307.1
23307.5
Restek Premium Drilled Uniliner (hole near top)
4.0 mm
6.3 mm x 78.5 mm
23311.1
23311.5
2
www.restek.com
NEW!
23311.25
1-800-356-1688 or 1-814-353-1300
Restek Premium Inlet Liners
CIS4 and PTV Liners
for Agilent GCs
NEW!
ID
OD x Length
Similar to Agilent part #
On Column PTV
1.7 mm
3.0 mm x 71 mm
Single Baffle PTV
2.0 mm
3.0 mm 71 mm
5183-2036 (10-pk.)
Single Baffle PTV w/Wool
2.0 mm
3.0 mm 71 mm
5183-2037 (10-pk.)
Baffled PTV
1.5 mm
3.0 mm 71 mm
5183-2038 (10-pk.)
SPME Liners
for Agilent GCs
NEW!
ID
OD x Length
0.75 mm
6.35 mm x 78.5 mm
SPME Liner
NEW!
Liners for Agilent MMI
ID
OD x Length
Similar to Agilent part #
Single Taper w/Dimple
2.0 mm
6.4 mm x 78.5 mm
5190-2296 (ea.)
1-800-356-1688 or 1-814-353-1300
ea.
cat.#
5-pk.
23430.1
23430.5
10-pk.
23431.10
23432.10
23433.10
ea.
cat.#
5-pk.
23434.1
23434.5
ea.
cat.#
5-pk.
23334.1
23334.5
25-pk.
www.restek.com
3
Other Deactivations
Intermediate Polarity (IP)–Deactivation
• Phenylmethyl-deactivated surface for better recovery of polar and nonpolar
compounds.
• Compatible with most common solvents.
• Our standard deactivation—every clear Restek liner is IP deactivated unless
otherwise requested.
Siltek®-Deactivation
For Siltek®-deactivated inlet liners, add the corresponding suffix number to the liner
catalog number.
•
•
•
•
•
•
Siltek®-Deactivated
Inlet Liners
Maximizes the inertness of the sample pathway with proprietary deactivation.
Minimizes breakdown.
Low bleed.
Thermally stable.
“Clean and green”—manufactured without the use of harmful organic solvents.
Ideal for chlorinated pesticides.
The patented Siltek® deactivation process for liners produces a highly inert glass surface that features high temperature stability, extreme durability, and low bleed. Try
Siltek® liners, guard columns, and connectors for better recovery of sample analytes.
qty.
each
5-pk.
25-pk.
Siltek Liner
-214.1
addl. cost
-214.5
addl. cost
-214.25
addl. cost
Siltek Liner w/Wool
-213.1
addl. cost
-213.5
addl. cost
-213.25
addl. cost
Siltek Liner w/CarboFrit
-216.1
addl. cost
-216.5
addl. cost
-216.25
addl. cost
Base-Deactivation
For base-deactivated inlet liners, add the corresponding suffix number to the liner
catalog number.
qty.
each
5-pk.
25-pk.
Base-Deactivated Liner
-210.1
addl. cost
-210.5
addl. cost
-210.25
addl. cost
Base-Deactivated Liner
w/ Base-Deactivated Wool
-211.1
addl. cost
-211.5
addl. cost
-211.25
addl. cost
Base-Deactivated Liner
w/CarboFrit
-229.1
addl. cost
-229.5
addl. cost
-229.25
addl. cost
Don’t Forget Routine Maintenance
Inlet liners are the key to good injection port maintenance; changing them regularly
helps prevent problems such as:
• Sample degradation resulting in poor response.
• Sample adsorption resulting in poor peak shape (tailing).
• Sample discrimination.
• Irreproducibility.
• Extraneous peaks from contamination or cored septum particles.
Finally, be sure to condition your liners at 20 °C higher than the operating inlet
temperature for a minimum of 10 minutes to prepare them for use. By following these
basic tips, you can avoid inlet problems and improve chromatographic performance.
4
www.restek.com
1-800-356-1688 or 1-814-353-1300
Other Inlet Liners
Splitless Liners
for Agilent GCs
Benefits/Uses
ID*
OD x Length
2 mm Splitless
trace samples <2 µL
2.0 mm
6.5 mm x 78.5 mm
4 mm Splitless
trace samples >2 µL
4.0 mm
6.5 mm x 78.5 mm
4 mm Splitless w/Deact. Wool
5 mm Splitless
trace samples >2 µL
accommodates more
polar solvents and
lower MW solvents
ea.
cat.#
5-pk.
25-pk.
20712
20713
20714
20772
20773
20774
22400
22401
22402
22975
22976
2 mm Splitless (Quartz)
trace samples <2 µL
2.0 mm
6.5 mm x 78.5 mm
20914
20915
4 mm Splitless (Quartz)
trace samples >2 µL
4.0 mm
6.5 mm x 78.5 mm
20912
20913
4 mm Splitless w/Deact. Wool (Quartz)
trace samples >2 µL
4.0 mm
6.5 mm x 78.5 mm
22403
22404
Single Taper Splitless (2 mm)
trace samples <2 µL
2.0 mm
6.5 mm x 78.5 mm
20795
20796
20797
Single Taper Splitless (4 mm)
trace samples >2 µL
4.0 mm
6.5 mm x 78.5 mm
20798
20799
20800
Single Taper Splitless (4 mm) w/Deact. Wool
trace samples >2 µL
accommodates more
polar solvents and
lower MW solvents
22405
22406
22407
5.0 mm
6.5 mm x 78.5 mm
22973
22974
trace, active samples >2 µL
4.0 mm
6.5 mm x 78.5 mm
20784
20785
2.0 mm
trace, active, dirty samples <2 µL 6.5 mm x 78.5 mm
20907
20908
4.0 mm
6.5 mm x 78.5 mm
20895
20896
20997
2.0 mm
6.5 mm x 78.5 mm
20980
20981
20982
4.0 mm
6.5 mm x 78.5 mm
20983
20984
20985
4.0 mm
6.5 mm x 78.5 mm
22408
22409
22410
4.0 mm
6.5 mm x 78.5 mm
20986
20987
20988
Single Taper Splitless (5 mm)
Double Taper Splitless (4 mm)
Cyclo Double Taper (2 mm)
Cyclo Double Taper (4 mm)
Recessed Single Taper (2 mm)**
Recessed Single Taper (4 mm)**
Recessed Single Taper (4 mm) w/Deact. Wool**
Recessed Double Taper (4 mm)**
trace, active, dirty samples > 2 µL
base easily packs
with wool for
dirty samples <2 µL
base easily packs
with wool for
dirty samples >2 µL
base easily packs
with wool for
dirty samples >2 µL
trace, active samples >2 µL
4.0 mm
6.5 mm x 78.5 mm
Similar to
Agilent part #
5181-8818 (ea.)
5183-4703 (5-pk.)
5183-4704 (25-pk.)
210-3003 (ea.)
210-3003-5 (5-pk.)
19251-60540 (ea.)
5183-4691 (5-pk.)
5183-4692 (25-pk.)
5.0 mm
6.5 mm x 78.5 mm
4.0 mm
6.5 mm x 78.5 mm
18740-80220 (ea.)
5183-4707 (5-pk.)
5181-3316 (ea.)
5183-4695 (5-pk.)
5183-4696 (25-pk.)
5062-3587 (ea.)
5183-4693 (5-pk.)
5183-4694 (25-pk.)
5181-3315 (ea.)
5183-4705 (5-pk.)
5183-4706 (25-pk.)
*Nominal ID at syringe needle expulsion point.
**Use with two-hole ferrule for dual-column analysis.
20786
All liners are shipped with intermediate
polarity (IP) deactivation unless otherwise
requested. (See page 4.)
Restek can provide any of the liners shown with any of three
proprietary deactivation processes, including highly inert
Siltek® coating. Ordering information is on page 4.
Packings materials, including wool and CarboFrit®, can be
provided in any liner—subject to the liner ID and geometry.
Ordering information is on page 8.
1-800-356-1688 or 1-814-353-1300
Siltek®-Deactivated Liners
www.restek.com
5
Other Inlet Liners
Split Liners
for Agilent GCs
1 mm Split**
4 mm Split w/Deact. Wool
Benefits/Uses
for purge & trap
inlet splitting
or sample <1 µL
universal,
use with Agilent
7673 autosampler
ID*
OD x Length
Similar to
Agilent part#
1.0 mm
6.3 mm x 78.5 mm
18740-80200 (ea.)
5183-4709 (5-pk.)
19251-60540 (ea.)
5183-4691 (5-pk.)
5183-4692 (25-pk.)
4.0 mm
6.3 mm x 78.5 mm
ea.
cat.#
5-pk.
20972
20973
20781
20782
25-pk.
20783
Laminar Cup Splitter
high MW compounds
4.0 mm
6.3 mm x 78.5 mm
20801
20802
mini-Lam Split
high MW compounds
4.0 mm
6.3 mm x 78.5 mm
20990
20991
20709
20710
4.0 mm
6.3 mm x 78.5 mm
20706
20707
20823
20824
21022
21023
20979
22983
22984
22985
ea.
cat.#
5-pk.
25-pk.
21032
21033
20994
20995
20996
ID*
OD x Length
cat.#
ea.
cat.#
5-pk.
0.75mm
6.35mm x 78.5mm
21110
21111
Cup Splitter
4.0 mm
6.3 mm x 78.5 mm
18740-80190 (ea.)
5183-4699 (5-pk.)
Cyclosplitter
high & low MW compounds
dirty samples,
many injections
before cleaning required
2 mm Split Precision Liner w/Deact. Wool
dirty samples, trace samples
2.0 mm
6.3 mm x 78.5 mm
4 mm Split Precision Liner w/Deact. Wool
dirty samples, trace samples
4.0 mm
6.3 mm x 78.5 mm
210-4004-5 (5-pk.)
4 mm Single Taper Precision Liner w/Deact. Wool
dirty samples, trace samples
4.0 mm
6.3 mm x 78.5 mm
210-4022-5 (5-pk.)
Split/Splitless Liners
for Agilent GCs
Low Pressure Drop Precision Liner w/Deact. Wool
Low Pressure Drop Liner w/Deact. Wool
SPME Liners
for Agilent GCs
SPME Liner
Benefits/Uses
ID*
OD x Length
universal
4.0 mm
6.3 mm x 78.5 mm
universal
5183-4647, 5183-4711 (ea.)
4.0 mm
5183-4701, 5183-4712 (5-pk.)
6.3 mm x 78.5 mm
5183-4713 (25-pk.)
Benefits/Uses
ideal for
low-volume
SPME applications
Similar to
Agilent part #
*Nominal ID at syringe needle expulsion point.
**Use this liner for increased sensitivity.
20708
All liners are shipped with intermediate
polarity (IP) deactivation unless otherwise
requested. (See page 4.)
Siltek® Metal Inlet Liners for Agilent GCs
• Won’t crack, chip, or break like glass liners.
• Excellent response for pesticides, phenols, and other active compounds.
Siltek®: Unsurpassed
Inertness & Durability!
6
www.restek.com
Liner Type (5.2mm ID x 6.3mm OD x 78.5mm)
Cyclo/Single Taper
Single Taper
Cyclosplitter
Split/Splitless w/Deact. Wool
5-pk.
20974
21702
20726
21700
25-pk.
20975
21703
20729
21701
1-800-356-1688 or 1-814-353-1300
Other Inlet Liners
DI Liners for Agilent GCs**
(For 0.25/0.32/0.53mm ID Columns)
Drilled Uniliner (hole near top)
Drilled Uniliner (hole near bottom)
Double Taper Drilled Uniliner (hole near top)
Double Taper Drilled Uniliner (hole near bottom)
Drilled Cyclo-Uniliner (hole near top)
1 mm Uniliner
Uniliner
Cyclo-Uniliner
Open-top Uniliner w/Deact. Wool
Benefits/Uses
trace, active samples,
high recovery
& linearity
trace, active samples,
high recovery
& linearity
trace, active samples,
high recovery
& linearity
trace, active samples,
high recovery
& linearity
trace, dirty, high MW,
active samples,
high recovery & linearity
trace, active samples,
samples <1 µL
ID*
OD x Length
Similar to
Agilent part #
ea.
cat.#
5-pk.
25-pk.
21054
21055
20998
20756
20771
20508
20509
20954
20989
4.0 mm
6.3 mm x 78.5 mm
22979
22980
1.0 mm
6.3 mm x 78.5 mm
21052
21053
4.0 mm
6.3 mm x 78.5 mm
22268
22269
4.0 mm
6.3 mm x 78.5 mm
22270
22271
4.0 mm
6.3 mm x 78.5 mm
22272
22273
4.0 mm
6.3 mm x 78.5 mm
4.0 mm
6.3 mm x 78.5 mm
G1544-80730
4.0 mm
6.3 mm x 78.5 mm
4.0 mm
6.3 mm x 78.5 mm
trace, active samples,
high recovery
& linearity
trace, dirty,
high MW active samples,
high recovery & linearity
trace, dirty,
active samples,
high recovery & linearity
G1544-80700
*Nominal ID at syringe needle expulsion point.
**Hole in Drilled Uniliner liner makes direct injection possible with EPC-equipped Agilent 6890 & 7890 GCs!
Liners for APEX ProSep 800 & ProSep 800 Plus GCs
APEX Liners for ProSep 800
& ProSep 800 Plus GCs
Benefits/Uses:
ID*
OD x Length
Similar to
APEX part #
Mega IV (4.0 mm ID)
injections ≤125 µL
4.0 mm
6.0 mm x 243 mm
L-00410
Micro I (1.0 mm ID)
injections ≤5 µL
1.0 mm
6.0 mm x 243 mm
L-00110
MIDI II (2.0 mm ID)
injections ≤25 µL
2.0 mm
6.0 mm x 243 mm
L-00210
cat.#
ea.
21075
21073
21074
*Nominal ID at syringe needle expulsion point.
Liners for ATAS Injectors
Benefits/Uses:
ID*
OD x Length
ATAS Open Liner, 3 mm
universal
3.0 mm
5.0 mm x 80 mm
ATAS Open Liner, 1 mm
trace, active samples <1 µL
1.0 mm
5.0 mm x 80 mm
A100049
ATAS Fritted Gooseneck
dirty samples
3.0 mm
5.0 mm x 80 mm
A100126
Liners for ATAS Injectors
Similar to
ATAS part #
ea.
cat.#
5-pk.
22415
22416
22417
22418
22419
22420
*Nominal ID at syringe needle expulsion point.
3.3mm ID DMI Inlet Liner For ATAS LINEX DMI System OPTIC 2 and 3 inlets
Liners for ATAS LINEX DMI System
OPTIC 2 and 3 inlets
ATAS LINEX DMI Liner
ID*
OD x Length
cat.#
5-pk.
3.3 mm
5.0 mm x 81 mm
22353
All liners are shipped with intermediate polarity (IP)
deactivation unless otherwise requested. (See page 4.)
1-800-356-1688 or 1-814-353-1300
www.restek.com
7
Inlet Liner Packing Materials
CarboFrit® Inlet Liner Packing Material
Deactivated Wool
24324
• More inert than our traditional fused silica wool.
• Use to vaporize a sample in a liner prior to introduction into
a capillary column.
Description
Deactivated Wool
qty.
10 grams
cat.#
24324
• Highly inert.
• Extends analytical column lifetime.
• Enhances reproducibility of split and splitless
injections.
• Uniform pore size and consistent packing density guarantee consistent flow through the liner.
• Easy to install in any liner with an ID > 3.5 mm
when using puller-inserter tool listed below.*
Add the corresponding suffix number to the liner catalog number.
qty.
ea.
5-pk.
25-pk.
suffix
-209.1
-209.5
-209.25
addl. cost
addl. cost
addl. cost
*Liners with IDs less than 3.5 mm are difficult to pack. We will pack them on a custom
basis (minimum neck ID of 2 mm required).
Replacement CarboFrit® Inserts
20999
Base-Deactivated Wool
Description
Frits for liner ID ≤ 4 mm
Frits for liner ID > 4 mm
qty.
10-pk.
10-pk.
cat. #
20295
20294
Ideal for amines and other basic compounds.
Description
Base-Deactivated Wool
qty.
10 grams
cat.#
20999
21642
Prepacked Inlet Liners
Let Restek do the work! Just add the appropriate suffix to the
liner catalog number.
qty.
ea.
5-pk.
25-pk.
Wool
-200.1
-200.5
-200.25
CarboFrit†
-209.1
-209.5
-209.25
addl. cost
addl. cost
addl. cost
CarboFrit® Puller/Inserter Tool
• Hook end for removing CarboFrit® inserts.
• Bent end (90°) for inserting CarboFrit® inserts.
Description
CarboFrit Puller/Inserter Tool
qty.
ea.
cat.#
21642
†CarboFrit inserts require a neck greater than 2 mm.
tech
tip
8
www.restek.com
Use of Packings with an Autosampler
We recommend using an injection port liner with wool or CarboFrit® packing when making injections
with an autosampler. If there is no packing material in the liner, the solvent droplets act like water on a
hot iron: they bounce around until vaporized (Leidenfrost phenomenon). Because autosamplers make
rapid injections, samples can be incompletely vaporized, leading to nonreproducible peak response
and tailing. You can prevent this by using wool or CarboFrit® packing material in the splitless liner to
provide a surface for the solvent droplets to “sit” on until the heat from the injector vaporizes them.
1-800-356-1688 or 1-814-353-1300
Inlet Liner Accessories
20181
20114
No more burned
fingers!
Inlet Liner Removal Tool
Mini Wool Puller/Inserter
Insert and remove wool plugs easily. Order a spare pack so you’ll
always have one available.
• Easily remove liner from injector—no
more burned fingers.
• Made from high-temperature silicone.
• Won’t chip or crack the liner.
Description
Inlet Liner Removal Tool
Description
Mini Wool Puller/Inserter
qty.
2-pk.
qty.
3-pk.
cat.#
20114
cat.#
20181
26262
26261
Eliminates user variation!
The Claw and The Claw Holder Kit
Inlet Liner Packing Tool
• Easily removes hot liners from
injection ports.
• 4 mL vials (not included) can be
replaced when dirty.
• Position wool reproducibly every time.
• Accurate to a specific, measured depth.
• Can be used with all manufacturer’s liners.
Never again will you have to burn
your fingers removing a hot injection
port liner. The Claw safely and cleanly
removes liners, O-rings, or other small
objects from the injection port. You
can then place the hot objects in a clean
4 mL vial situated in the Claw holder
until ready for reuse.
Description
The Claw
The Claw Holder Kit (includes The Claw and holder)
WISP 48 Snap Seal Vial
Loosen the nut on
the side of the tool
and adjust the gauge
to the manufacturer’s recommended
depth.
Place a plug of
loosely bound wool
at the top of the inlet
liner.
Description
Inlet Liner Packing Tool
Recommended for inlet liners with an ID ≥ 2 mm.
1-800-356-1688 or 1-814-353-1300
Insert the liner
packing tool into the
liner until the tool
bottoms out. Remove
the tool. The wool
is now positioned
correctly in the liner
and the liner is ready
for use.
qty.
ea.
cat.#
20339
qty.
ea.
kit
100-pk.
cat. #
26261
26262
24658
tech tip
Injector Maintenance
Approximately ninety percent of “bad” chromatography is traceable to
problems in the injection port. These problems include contaminated
carrier gas, incorrect injector flows, active or dirty sites on inlet seals and
liners, improper use of wool, leaks, backflash, discrimination, incorrect
injector temperature, poor column installation, and use of the wrong injection technique. To minimize injection port problems, set up a routine
maintenance schedule and be sure to investigate the injector first when
troubleshooting.
www.restek.com
9
Leak Detector
Restek® Electronic Leak Detector
Don't let a small leak turn into a costly repair—protect your analytical column by using
a Restek® leak detector.
Features & benefits include:
• Audible tone indicates the severity of a leak.
• Redesigned circuitry offers 12 hours of operation between charges.
• Detects a broad range of gases; Ex rated for use with hydrogen and other
explosive gases.*
• Ergonomic, handheld design.
• Rugged side grips for added durability.
• Handy probe storage for cleanliness and convenience.
• Long-lasting battery; up to 12 hours of continuous use.
• Automatic shutoff.
• A convenient carrying and storage case.
• Easy-to-clean probe assembly.
• A universal charger set (U.S., European, UK, and Australian plugs included).
NEW
LOOK!
22655
Backed by a one-year warranty, the Restek® leak detector is the industry standard for
performance and affordability in handheld leak detectors.
Leak Detector Specifications
Detectable Gases:
Helium, nitrogen, argon, carbon dioxide, hydrogen
Battery:
Rechargeable lithium ion internal battery pack (12 hours normal operation)
Operating Temperature Range: 32–120 °F (0–48 °C)
Humidity Range:
0–97%
Warranty: One year
Certifications:
CE, Ex, Japan
Compliance:
WEEE, RoHS
Limits of Detection
These gases can be detected with the Restek® electronic leak detector at the following leak
rates:
Minimum Detectable Gas Limits and Indicating LED Color:
Helium, 1.0 x 10-5, red LED
Hydrogen*, 1.0 x 10-5, red LED
Nitrogen, 1.4 x 10-3, yellow LED
Argon, 1.0 x 10-4, yellow LED
Carbon dioxide, 1.0 x 10-4, yellow LED
Gas detection limits measured in atm cc/sec.
Restek’s electronic leak detector makes
finding leaks a quick and easy task.
22658
22657
Description
Leak Detector With Hard-Sided Carrying Case and Universal Charger Set
(U.S., UK, European, Australian)
Small Probe Adaptor for Leak Detector
Dynamic Duo Combo Pack (Restek Leak Detector and ProFLOW 6000 Flowmeter)
Soft-Sided Storage Case for Leak Detector or ProFLOW 6000 Flowmeter
Car Charger/Adaptor
Universal AC Power Adaptor
qty.
cat.#
ea.
22655
ea.
kit
ea.
ea.
ea.
22658
22654
22657
22652
22653
price
Avoid using liquid leak detectors on a GC! Liquids can be drawn into the system and/or into the leak detector.
*Caution: The Restek® electronic leak detector is designed to detect trace amounts of hydrogen in a noncombustible
environment. It is NOT designed for determining leaks in a combustible environment. A combustible gas detector should
be used for determining combustible gas leaks under any condition. When using it to detect hydrogen, the Restek®
electronic leak detector may only be used for determining trace amounts in a GC environment.
Restek recommends
If you think that your Restek® electronic leak
detector needs service or repair, please contact
Restek® Customer Service before sending your
unit in (cat.# 22655-R). Leak detector service/
repair will include inspection and testing of
the unit.
10
www.restek.com
NEW!
22652
22653
1-800-356-1688 or 1-814-353-1300
Flowmeter
Restek ProFLOW 6000 Electronic Flowmeter
State-of-the-art features include:
• Measures volumetric flow for gases across a range of 0.5–500 mL/min.
• NIST traceable calibration.
• Ex rating (electrical apparatus for explosive gas atmospheres) for hydrogen and
related gas types.
• Accuracy of ± 2% of flow reading or ± 0.2 mL/min., whichever is greater.
• Over range warning indicator.
• Auto shut-off feature.
• Use as a benchtop or hand-held unit.
• Ergonomic design and side grips for comfort.
• Measures most gas types.*
• Convenient carrying/storage case included.
• Uses 2-AA batteries (included).
• Data output via USB port.
• 1-year warranty.
• Recalibration service available.
Flowmeters that can measure flammable gases are becoming mandatory, due to the
increased use of hydrogen in chromatography. With its Ex rating, the Restek ProFLOW
6000 Flowmeter is designed specifically with explosive and flammable gases in mind.
The Restek ProFLOW 6000 is the only flowmeter you need for any type of chromatography gas measurement because of its wide range of capabilities. The ProFLOW
6000 is an electronic device capable of measuring volumetric flow for most gases. Realtime measurements can be made for various types of flow paths, including continually
changing gas types. This portable unit is designed for easy hand-held use, and the
stand adds benchtop convenience.
Flowmeter Facts:
Type of flowmeter:
Battery:
Operating Temp. Range:
Warranty:
Certifications:
Compliance:
22656
restek recommends
Recalibrate your ProFLOW 6000 Flowmeter
once every year. Prolonged failure to
recalibrate your unit may result in increased
error. To always get the most accurate flow
measurements, contact Customer Service
to send in your flowmeter for recalibration
(cat.# 22656-R).
volumetric
2-AA
32–120 °F (0–48 °C)
one year
CE, Ex
WEEE, RoHS
Description
Restek ProFLOW 6000 Electronic Flowmeter with Hard-Sided Carrying Case
ProFLOW 6000 Recalibration Service
Soft-Side Storage Case
qty.
ea.
ea.
ea.
cat.#
22656
22656-R
22657
*The flowmeter is designed to measure clean, dry, non-corrosive gases.
1-800-356-1688 or 1-814-353-1300
www.restek.com
11
O-Rings, Septa, Seals
Viton® O-Rings for Agilent GCs
Fit split (6.3 mm OD) or
splitless (6.5 mm OD) liners.
Max.
temp.
250 °C
Description
Viton O-Rings for Agilent GCs
Similar to
Agilent part #
5188-5365
qty.
25-pk.
cat.#
20377
Septa for Agilent GCs
• Preconditioned and ready to use.
• Packaged in precleaned glass jars.
Graphite O-Rings for Agilent
and Varian 1177 Injectors
Excellent thermal stability at injection
port temperatures up to 450 °C!
Description
6.35 mm ID Graphite
O-Rings for split liners
6.5 mm ID Graphite
O-Rings for splitless liners
Max.
temp.
Similar to
Agilent part #
10-pk.
cat.#
50-pk.
cat.#
450 °C
5180-4168
20296
20297
450 °C
5180-4173
20298
20299
Liner Seals
Description
Liner Seals for CIS4
450 °C
and PTV
100-pk.
27122
27137
27140
27143
27083
27087
27089
27091
HANDY septum size chart
for CIS4 and PTV
Max.
temp.
Septum Diameter
25-pk.
50-pk.
Thermolite Septa (usable to 340 °C inlet temp.)
5 mm (3/16")
27120
27121
27135
27136
9.5 mm (3/8")
10 mm
27138
27139
11 mm (7/16")
27141
27142
Premium Non-stick BTO Septa (usable to 400 °C inlet temp.)
5 mm CenterGuide
27082
9.5 mm (3/8")
27086
10 mm
27088
11 mm (7/16") CenterGuide
27090
Similar to
Agilent part #
Similar to
Gerstel part #
qty.
cat.#
5182-9749
007541-005-00
5-pk.
22684
Agilent Instrument
5880A, 5890, 6890, 6850, 7890, PTV
5700, 5880
On-Column Injection
Septum Diameter (mm)
11
9.5/10
5
Replacement Viton® O-Rings
for use with the Agilent Flip Top
Inlet Sealing System
Description
Viton Replacement O-Rings for use with the
Agilent Flip Top Inlet Sealing System
Similar to
Agilent part #
qty.
cat.#
5188-5366
10-pk.
22336
Injector/Detector Plug Nuts
• Use to cap off an injector to isolate leaks.
• Use to cap off a detector for thermal cleaning.
• Use to check a detector or make-up gas flow rate.
• Use to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.
Description
Injector/Detector Plug Nuts
12
www.restek.com
Similar to
Agilent part#
5020-8294
qty.
2-pk.
cat.#
21883
Repair and Upgrade
Your Agilent GC!
Restek offers a whole line of innovative
replacement products for Agilent GCs. From
injector to detector, the GC accessory parts you
need are at www.restek.com/gcacc
1-800-356-1688 or 1-814-353-1300
Septa, MicroShot™ Injector
Merlin Microseal Septa for Agilent GCs
• Allow operation from 3 to 100 psi (general purpose Microseal septa) or 1 to 45 psi
(low pressure Microseal septa).
• Maximum temperature—Agilent 7890, 6890, 5890 Series II: 325 °C; Agilent 5890A:
300 °C.
The advantages of the Merlin Microseal septum include elimination of septum coring,
longer life, and consistent, low needle-insertion force. The Microseal septum incorporates two separate sealing mechanisms. These sliding seals eliminate septum coring
and the resulting accumulation of septum crumbs in the injection port liner.
The Microseal septum uses a 23-gauge (0.63 mm, 0.025") needle or probe with a blunt,
truncated conical tip. Since the syringe plunger end details are determined by manual
or autosampler compatibility, often a removable needle syringe is an effective way to
match both of these requirements. No adapter is required for the Agilent inlet. Installation is simple, requiring no modification of the injection port.
Description
General Purpose Kit for Agilent GCs (3 to 100 psi)
Nut & 2 General Purpose (#410) Microseals
Nut & 1 General Purpose (#410) Microseal
Low Pressure Kit for Agilent GCs (1 to 45 psi)
Nut & 2 Low Pressure (#310) Microseals
Nut & 1 Low Pressure (#310) Microseal
Replacement Microseals
General Purpose Microseal (most applications, 3 to 100 psi)
Low Pressure Microseal (1 to 45 psi)
Microseal for SPME Applications (3 to 100 psi)
Replacement Microseal Nut
Merlin #
Similar to Agilent#
cat.#
404
405
5182-3442
22810
22811
304
305
5181-8833
5181-8816
22813
22814
410
310
21-01
403
5182-3444
5181-8815
22812
22815
22782
22809
5182-3445
22811
22810
22814
22813
22812
22782
22809
Merlin MicroShot™ Injector
• NIST traceability assures accurate injections.
• Fixed volume reduces sampling error.
• Saves time—no need to transfer to autosampler vials.
• Prevents bent syringe plungers.
• Five injection volumes available.*
NEW!
Increase the accuracy and reproducibility of manual injections with the Merlin MicroShot™ injector. This new injector is calibrated to NIST reference standards to assure
accurate and traceable displacement. Precise repeated injections of the preset volume
can be made using a standard autosampler syringe with less variation than when injecting by hand. The trigger mechanism provides rapid sample delivery, which reduces
needle residence time in the injection port and minimizes potential sample discrimination.
The Merlin MicroShot™ injector allows convenient sampling from a wide variety of
containers, so you can save time by eliminating the need to transfer aliquots into autosampler vials. The design of this unit also includes a plunger support, which protects
the syringe plunger and prevents it from bending.
22226
Fits Agilent-style (ball-end plunger) autosampler syringes with either fixed or removable, 23- or 26-gauge needles.
Description
0.1 µL injection volume
0.2 µL injection volume
0.5 µL injection volume
1.0 µL injection volume
2.0 µL injection volume
Merlin cat.#
701-01
701-02
701-05
701-10
701-20
qty.
ea.
ea.
ea.
ea.
ea.
cat.#
22226
22227
22228
22229
22230
*Syringe not included. Requires Agilent-style (ball-end plunger) autosampler syringe.
1-800-356-1688 or 1-814-353-1300
www.restek.com
13
Inlet Seals
Flip Seal™ Dual Vespel® Ring Inlet Seals
• Reversible, two-sided design allows significantly more analyses than
other seals, at the same price—simply use, flip, then use again!
• Vespel® ring embedded in top and bottom surface eliminates need
for a washer.
• Highly inert gold-plated or Siltek®-deactivated seals reduce
breakdown and adsorption of active compounds, maximizing
component transfer to GC column.
• Very little torque required to make seal—reduces
operator variability.
NEW!
1/16"
Adaptor
Fitting
restek innovation!
Patented.
1.2 mm ID Flip Seal Dual Vespel Ring Inlet Seal
Gold-Plated
Siltek-Deactivated
Flip Seal Dual Vespel Ring Inlet Seal Kit
Includes: gold-plated 1.2 mm ID inlet seal, reducing nut adaptor, 1/16" SS nut
2-pk.
23411
23412
qty.
kit
10-pk.
23413
23414
cat.#
23406
Note: The Flip Seal™ inlet seal requires a special reducing nut adaptor fitting, which is included in the kit.
The Flip Seal™ Adaptor can be used with standard 1/16" ferrules.
Dual Vespel® Ring Inlet Seals
Washerless, leak-tight seals for Agilent GCs
• Does not require a separate washer.
• Requires less torque to seal.
• Does not require retightening of reducing nut
after several oven cycles.
• Extends column lifetime by preventing oxygen
from reaching the column.
• Same price as the regular inlet seals with washers.
Vespel® ring
seal on top and
bottom surfaces!
21238
A Dual
Vespel® ring
inlet seal
eliminates
the need for a
washer!
21240
21248
0.8 mm ID Dual Vespel Ring Inlet Seal
Gold-Plated
Siltek-Treated
Stainless Steel
1.2 mm ID Dual Vespel Ring Inlet Seal
Gold-Plated
Siltek-Treated
Stainless Steel
2-pk.
21240
21242
21238
2-pk.
21246
21248
21244
Extend your column lifetimes!
10-pk.
21241
21243
21239
10-pk.
21247
21249
21245
50-pk.
23418
23419
23420
Dual Vespel® Ring Cross-Disk Inlet Seals for Agilent GCs
• Ideal for high-flow split applications.
• Washerless, leak-tight seals.
22083
0.8 mm ID Dual Vespel Ring Cross-Disk Inlet Seal
Gold-Plated
Siltek-Treated
2-pk.
22083
22085
10-pk.
22084
22086
22085
14
www.restek.com
1-800-356-1688 or 1-814-353-1300
Inlet Seals
Replacement Inlet Seals With Washers
• Siltek® treatment provides inertness similar to fused silica.
• All seals include washers.
Replacement Inlet Seals for Agilent GCs
The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the
sample and must be changed frequently to prevent adsorption of active compounds.
In addition, septum fragments and sample residue accumulate on the disk surface,
requiring disk replacement.
21315
To reduce breakdown and adsorption of active compounds, use Siltek® or gold-plated
seals.
Single-Column Installation
0.8 mm ID (Opening)
Gold-Plated
Siltek-Treated
Stainless Steel
0.25/0.32 mm ID Dual-Column Installation
1.2 mm ID (Opening)
Gold-Plated
Siltek-Treated
Stainless Steel
0.53 mm ID Dual-Column Installation
1/16-inch ID (Opening)
Stainless Steel
Similar to
Agilent part #
18740-20885
18740-20880
21317
2-pk.
21317
21319
21315
10-pk.
21318
21320
21316
50-pk.
23415
23416
23417
2-pk.
21305
21307
20390
10-pk.
21306
21308
20391
2-pk.
20392
10-pk.
20393
Similar to
Agilent part #
5061-5869
qty.
15-pk.
cat.#
21710
21319
Note: The 1.2 mm inlet seal is recommended
when installing two columns using a two-hole
Vespel®/graphite ferrule.
All seals include washers.
Replacement Inlet Seal Washers
Description
Replacement Inlet Seal Washers
21710
Cross-Disk Inlet Seals for Agilent GCs
• Ideal for high-flow split applications on Agilent 5890 GCs.
• All seals include washers.
0.8 mm ID Cross-Disk Inlet Seal
Gold-Plated
Siltek-Treated
1.2 mm ID Cross-Disk Inlet Seal
Gold-Plated
Siltek-Treated
Similar to
Agilent part #
5182-9652
—
Similar to
Agilent part #
—
—
2-pk.
20477
20475
10-pk.
20476
20474
2-pk.
21009
21011
10-pk.
21010
21012
Similar to
Agilent part #
5182-9763
qty.
5-pk.
cat.#
21409
20475
20477
Silver PTV Seals for Agilent 6890 GCs
Description
Silver PTV Seals for Agilent 6890 GCs
21409
1-800-356-1688 or 1-814-353-1300
www.restek.com
15
Injection Ports
EZ Twist Top® Split/Splitless Injection Ports for Agilent GCs
• Change inlet liners faster and more easily.
• Gas lines are attached to shell weldment bottom to help eliminate broken gas lines.
• Gas lines don't interfere with routine maintenance.
• Weldment removal tool allows for quick removal of the hot weldment without
fingers ever touching hot surfaces.
• Weldment stays secure in the tool for reattachment.
The importance of injection port maintenance has been well documented by instrument and column companies industry wide. Restek has made it easy to carry out this
maintenance with the innovation of our EZ Twist Top® injection port.
restek innovation!
Patented.
Get the EZ Twist Top Advantage
Eliminate damaged gas lines
Siltek deactivation for enhanced inertness & durability
Avoid touching hot metal surfaces—weldment tool included
Designed
for “drop in”
installation!
20631
22724
22175
22177
21242
22078
20883
Restek
EZ Twist Top
x
x
x
Agilent
Flip Top
22175
EZ Twist Top® Split/Splitless Injection Port for Agilent 7890 GCs
Description
Injection Port Assembly Kit
Includes: weldment, shell weldment, 2 weldment O-rings, Siltek dual Vespel ring inlet seal, septum
nut, reducing nut, stainless steel capillary nut for use with 1/16" ferrules, and weldment removal
tool
Injection Port Assembly Kit, Siltek Treated
Includes: Siltek weldment, Siltek shell weldment, 2 weldment O-rings, Siltek dual Vespel ring inlet
seal, septum nut, reducing nut, stainless steel capillary nut for use with 1/16" ferrules, and weldment removal tool
Weldment
(2 weldment O-rings are installed on the weldment)
Weldment, Siltek Treated
(2 weldment O-rings are installed on the weldment)
Shell Weldment
Shell Weldment, Siltek Treated
Weldment O-rings
High Temperature Weldment O-Rings
Septum Nut, Autosampler & PTV (for 23-gauge needles)
Stainless Steel Capillary Column Nut (for use with standard 1/16" ferrules)
Reducing Nut
0.8 mm dual Vespel ring inlet seal, Siltek Treated
Weldment Removal Tool
qty.
cat.#
kit
22177
kit
22178
ea.
22724
ea.
22732
ea.
ea.
10-pk.
10-pk.
ea.
2-pk.
ea.
2-pk.
10-pk.
ea.
22175
22176
22729
23405
20631
20883
22078
21242
21243
22728
Visit www.restek.com/slideshows for an educational video on our EZ Twist Top® injection port system.
tech tip
Which EZ Twist Top® injection port should you buy?
The type of split vent trap you have connected to the EPC module/block on your 6890/6850 Agilent GC determines which EZ Twist Top® Injection Port you need to buy.
Simply slip the weldment removal tool over
the weldment, then twist and remove the
weldment. For speed and efficiency, the
weldment stays secured in the weldment
removal tool until you reattach it.
16
www.restek.com
Simply remove the top and rear panel on the GC and see if you have the small (pencil type) split
vent filter (cat.# 22820) or the large canister type filter (cat.# 23031) attached to the split vent gas
line. If you have the small (pencil type) split vent filter, you need the EZ Twist Top® Injection Port
for Agilent 6890/6850 GCs (cat.# 22721 or 22722). If you have the large canister filter, you’ll need
the EZ Twist Top® with Optional Split Vent for Agilent 6890/6850 GCs, for use with large canister
type filters (cat.# 22735 or 22736).
1-800-356-1688 or 1-814-353-1300
Injection Ports
EZ Twist Top® Split/Splitless Injection Port for Agilent 6890/6850 GCs
(for use with large canister type filter)
Description
Injection Port Assembly Kit
Includes: split/splitless weldment, shell weldment, 2 weldment O-rings, Siltek dual Vespel ring inlet
seal, septum nut, reducing nut, stainless steel capillary nut for use with 1/16" ferrules, and weldment
removal tool
Injection Port Assembly Kit, Siltek Treated
Includes: Siltek split/splitless weldment, Siltek shell weldment, 2 weldment O-rings,
Siltek dual Vespel ring inlet seal, septum nut, reducing nut, stainless steel capillary nut
for use with 1/16" ferrules, and weldment removal tool
Optional Split/Splitless Shell Weldment
Optional Split/Splitless Shell Weldment, Siltek Treated
qty.
cat.#
kit
22735
kit
22736
ea.
ea.
22733
22734
22733
EZ Twist Top® Split/Splitless Injection Port for Agilent 6890/6850 GCs
with Pencil Traps
Description
Injection Port Assembly Kit
Includes: split/splitless weldment, shell weldment, 2 weldment O-rings, Siltek dual Vespel ring
inlet seal, septum nut, reducing nut, stainless steel capillary nut for use with 1/16" ferrules, and
weldment removal tool
Injection Port Assembly Kit, Siltek Treated
Includes: Siltek split/splitless weldment, Siltek shell weldment, 2 weldment O-rings,
Siltek dual Vespel ring inlet seal, septum nut, reducing nut, stainless steel capillary nut
for use with 1/16" ferrules, and weldment removal tool
Weldment
(2 weldment O-rings are installed on the weldment)
Weldment, Siltek Treated
(2 weldment O-rings are installed on the weldment)
Shell Weldment
Shell Weldment, Siltek Treated
Weldment O-rings
High Temperature Weldment O-Rings
Septum Nut, Autosampler & PTV (for 23-gauge needles)
Stainless Steel Capillary Column Nut (for use with standard 1/16" ferrules)
Reducing Nut
0.8 mm Dual Vespel Ring Inlet Seal, Siltek Treated
Weldment Removal Tool
qty.
cat.#
kit
22721
kit
22722
ea.
22724
ea.
22732
ea.
ea.
10-pk.
10-pk.
ea.
2-pk.
ea.
2-pk.
10-pk.
ea.
22723
22730
22729
23405
20631
20883
22078
21242
21243
22728
20631
22724
22723
21242
22721
22078
20883
22728
EZ Twist Top® Split/Splitless Injection Port for Agilent 5890 GCs
Description
Injection Port Assembly Kit
Includes: split/splitless weldment, shell weldment, 2 weldment O-rings, Siltek dual Vespel ringinlet
seal, septum nut, reducing nut, stainless steel capillary nut for use with 1/16" ferrules, and weldment removal tool
Injection Port Assembly Kit, Siltek Treated
Includes: Siltek split/splitless weldment, Siltek shell weldment, 2 weldment O-rings,
Siltek dual Vespel ring inlet seal, septum nut, reducing nut, stainless steel capillary nut
for use with 1/16" ferrules, and weldment removal tool
Weldment
(2 weldment O-rings are installed on the weldment)
Weldment, Siltek Treated
(2 weldment O-rings are installed on the weldment)
Shell Weldment
Shell Weldment, Siltek Treated
Weldment O-rings
High Temperature Weldment O-Rings
Septum Nut, Autosampler & PTV (for 23-gauge needles)
Stainless Steel Capillary Column Nut (for use with standard 1/16" ferrules)
Reducing Nut
0.8 mm Dual Vespel Ring Inlet Seal, Siltek Treated
Weldment Removal Tool
1-800-356-1688 or 1-814-353-1300
qty.
cat.#
kit
22725
kit
22726
ea.
22724
ea.
22732
ea.
ea.
10-pk.
10-pk.
ea.
2-pk.
ea.
2-pk.
10-pk.
ea.
22727
22731
22729
23405
20631
20883
22078
21242
21243
22728
20631
22724
22727
22725
21242
22078
20883
www.restek.com
17
Injection Port Supplies
Split/Splitless Injection Ports for Agilent GCs
Would you like better performance from your injector? Our
Siltek®-treated split/splitless injector is a direct replacement for
Agilent 5890 and 6890/6850 GCs, but Siltek® treatment passivates the metal surface to ensure an inert pathway for the sample,
delivering increased performance. The injector is manufactured
from high-quality stainless steel and meets or exceeds Agilent
original equipment performance.
20265
Injection Port Weldments for Agilent GCs for Use
With Purge and Trap Systems
Easily attach your purge and trap with pre-installed low dead
volume fittings.
22664
20266
Split/Splitless Injection Port (Direct Replacement or Siltek®
Injection Port Weldments
Treated) for Agilent 5890 GCs
for Agilent GCs with Tekmar Purge and Trap Systems
Description
Replacement Weldment*
Replacement Weldment*,
Siltek Treated
Replacement Shell Weldment
Replacement Shell Weldment,
Siltek Treated
Similar to
Agilent part #
19251-60575
qty.
ea.
cat.#
20265
19251-60575
ea.
20267
19251-80570
ea.
20266
19251-80570
ea.
20268
Description
Weldment for Agilent 6890 GCs
Weldment
for Agilent 6890 GCs with large canister type filter
Weldment for Agilent 5890 GCs
qty.
ea.
cat.#
22664
ea.
22668
ea.
22666
*For use with manual flow or EPC on Agilent 5890 GCs. For use with manual flow only on
Agilent 6890/6850 GCs.
22665
22674
22686
Injection Port Weldments
for Agilent GCs with OI Purge and Trap Systems
Description
Weldment for Agilent 6890 GCs
Weldment
for Agilent 6890 GCs with large canister type filter
Weldment for Agilent 5890 GCs
20265
qty.
ea.
cat.#
22665
ea.
22669
ea.
22667
22673
Split/Splitless Injection Port (Direct Replacement or Siltek®
Treated) for Agilent 6890/6850 GCs
Description
Replacement Weldment with EPC
Replacement Weldment with EPC,
Siltek Treated
Replacement Weldment*
Replacement Weldment*,
Siltek Treated
Replacement Shell Weldment
Replacement Shell Weldment,
Siltek Treated
Split/Splitless Weldment (for use with
large canister type filter)
Split/Splitless Weldment (for use with
large canister type filter), Siltek Treated
Similar to
Agilent part #
G1544-60575
qty.
ea.
G1544-60575
ea.
22672
19251-60575
ea.
20265
cat.#
22674
19251-60575
ea.
20267
G1544-80570
ea.
22673
G1544-80570
ea.
22671
G1544-60585
ea.
22686
G1544-60585
ea.
22670
tech tip
Installing a New Weldment
To eliminate possible leaks and damage to the weldment, always replace
the split vent line, nut, and ferrule when installing a new shell weldment.
Did you know Restek offers a full line of
Genuine Restek Replacement Parts for
many instrument manufacturers?
Visit www.restek.com/gcacc for
more information.
*For use with manual flow or EPC on Agilent 5890 GCs. For use with manual flow only on
Agilent 6890/6850 GCs.
18
www.restek.com
1-800-356-1688 or 1-814-353-1300
Injection Port Supplies
injection port
bore cleaner
20117
Septum Puller
• Use hooked end for removing septa and O-rings; pointed end
works well for removing stuck ferrules or debris.
• Keep several on hand in your laboratory—can be used in
many different ways.
aluminum oxide
sanding disk (cleans
critical seal on base
of injector)
Injection Port Repair Tool for
Agilent Split/Splitless Injection Ports
Description
Septum Puller
qty.
ea.
cat.#
20117
Septum Nuts for use with Agilent
5890/6890/6850/7890 Split/Splitless
Injectors
• Needle guide allows easy penetration
and prevents septum coring.
21309
• Manual injection septum nut allows use of 26-gauge needles
for on-column injections.
• Made of high-quality stainless steel.
Description
Septum Nut, Autosampler & PTV
(for 23-gauge needles)
Septum Nut, Manual Injection
(for 26-gauge needles)
Similar to
Agilent part #
qty.
cat.#
18740-60835
ea.
20631
18740-60835
ea.
21309
• Remove contaminants, achieve a better seal.
• Cleans critical inlet seal areas.
Description
Injection Port Repair Tool
for Agilent Split/Splitless Injection Ports
Replacement Sanding Disks (5 fine & 5 medium)
Replacement Bore Brushes (one 6.5 mm & one 7 mm)
ea.
21393
10-pk.
2-pk.
22689
21353
• Repair worn or damaged threads
in injection ports, fittings, etc.
• Built-in guide to prevent
cross-threading.
23018
Worn & damaged threads can allow oxygen into the system—
compromising analytical results and destroying columns.
Screw the tool completely onto the
injection port in a clockwise direction.
Unscrew the tool and inspect the
threads, repeat as necessary. When
done, wipe threads with methanol to
remove any debris.
24918
qty.
cat.#
ea.
24918
Injector Wrench for Agilent
5890/6890/6850 GCs
• Use to remove the septum nut and weldments
during GC maintenance.
• Use the smaller end to remove the septum
nut.
• Use the larger end to tighten the split/splitless
weldment nut.
• High-quality stainless steel construction.
• Meets original equipment performance.
Description
Rethreading Tool
qty.
ea.
cat.#
23018
tech tip
22065
Similar to
Agilent part #
qty.
cat.#
19251-00100
ea.
22065
1-800-356-1688 or 1-814-353-1300
cat.#
Make your injection port
threads like new!
• Easily remove the septum nut without touching the heated nut—no more burned fingers!
• Unique, ergonomic handle—easy to grip.
• Nut remains in tool for quick reattachment.
Description
Injector Wrench
for Agilent 5890/6890/6850 GCs
qty.
Rethreading Tool for Agilent
Split/Splitless Injection Ports
Septum Nut Removal Tool for
Agilent 5890/6890/6850/7890 GCs
Description
Septum Nut Removal Tool
for Agilent 5890/6890/6850/7890 GCs
21393
Minimizing Injector Discrimination
When an injected sample is not completely vaporized, lower percentages of compounds that are less volatile (i.e., compounds with high boiling points or high molecular weights) are transferred into the analytical
column. As a result, these later-eluting compounds will have progressively decreased peak areas. You can minimize injector discrimination
by reducing injector flows, increasing the injector temperature, using
pressure pulse injection or a fast autosampler, or using an injector liner
that aids in vaporization (e.g., a laminar cup splitter or a liner packed
with wool).
www.restek.com
19
Instrument Replacement Parts
Heater Block
for Agilent 6850/6890/7890
GC Split/Splitless Injector
NEW!
20634
Meets or exceeds original
manufacturer’s performance.
Description
Heater Block
Similar to
Agilent part #
G3452-20500,
G1544-20570
60 psig Backpressure
Regulator Kit for Agilent GCs
qty.
cat.#
ea.
27199
27199
Heater Block Retaining Nuts for
Similar to
Agilent part #
19246-60630
Description
Backpressure Regulator Kit
Agilent GC Split/Splitless Injectors
• Aluminum construction.
• Meet or exceed manufacturer’s performance.
Description
Heater Block Retaining Nut
for Agilent 5890 GCs
Heater Block Retaining Nut
for Agilent 6890/6850 GCs
Increase the versatility of your Agilent 5890 GC by replacing
the existing 30 psig (207 kPa) backpressure regulator and gauge
with our 60 psig (414 kPa) regulator. Enables you to use longer
60 m and 105 m columns as well as shorter 10 m columns. Includes complete instructions.
qty.
kit
cat.#
20634
23042
Similar to
Agilent part #
qty.
cat.#
19251-20620
ea.
22080
G1544-20590
ea.
23042
22820
22064
21610
22800
NEW!
27200
23031
Heater/Sensor Assembly for Agilent 6850/6890/7890 GCs
• Use with FID, TCD, NPD, and split/splitless inlets.
• Meets or exceeds original manufacturer’s performance.
Description
Heater/Sensor Assembly
Similar to
Agilent part #
G1530-61950
23040
qty.
ea.
cat.#
27200
23039
Oven Temperature Sensor Assembly for Agilent GCs
Description
Oven Temperature Sensor
for Agilent 5890 GC
Oven Temperature Sensor
for Agilent 6890 GC
Similar to
Agilent part #
qty.
cat.#
05890-61030
ea.
23040
G1530-61030
ea.
23039
23032
Replacement Chemical Traps for Agilent GCs
• Easy to install.
• Attach to same fittings as original manufacturer’s equipment.
• Built-in frits retain fine particles; adsorbents remove both
moisture and hydrocarbons.
Description
Replacement Split Vent Trap
for Agilent 6890/6850 GCs
Replacement Chemical Trap
for Agilent 5890 GCs
Split Vent Line (32-inch) for Agilent GCs
Includes: all installation hardware
O-Rings for Agilent Trap Fittings
Optional Split Vent Trap Assembly
for Agilent 6890/6850 GCs
Replacement Traps (2) and O-Rings (4)
www.restek.com
qty.
cat.#
G1544-80550
ea.
22820
05890-61260
ea.
21610
19251-80525
2-pk.
22800
22064
5180-4181
25-pk.
G1544-60610
kit
23031
G1544-80530
kit
23032
Heat Sink for Agilent 5890 GC
Split/Splitless Injector
Meets or exceeds original
manufacturer’s performance.
Description
Heat Sink
20
Similar to
Agilent part #
Similar to
Agilent part #
18740-20940
qty.
ea.
cat.#
20409
20409
1-800-356-1688 or 1-814-353-1300
Instrument Replacement Parts
22068
27184
23035
1/16-Inch Capillary Inlet Adaptor Fitting Kit
(Split/splitless fitting for capillary columns)
• 1/16-inch split/splitless fitting that accepts standard capillary
ferrules.
• Easier to install capillary columns because the nut protrudes
farther from the insulated injection port chamber.
• Same column insertion depth as the original manufacturer’s
equipment.
• Kit includes adaptor fitting, capillary nut, gold-plated 0.8 mm
ID dual Vespel® ring inlet seal, and one 0.4 mm ID ferrule.
Description
1/16-Inch Capillary Inlet Adaptor Fitting Kit
0.8 mm ID Dual Vespel Ring Inlet Seal, Gold-Plated
qty.
kit
2-pk.
10-pk.
cat.#
27184
21240
21241
22069
Heater Cartridge & Platinum Resistance Thermometer
(PRT) Sensor for Agilent 5890 GCs
• Use with 5890 FID and split/splitless weldments.
• Meets or exceeds original manufacturer’s performance.
Description
Injector/FID Heater and Injector/FID
PRT Sensor
Injector/FID Heater
Injector/FID PRT Sensor
Similar to
Agilent part #
qty.
cat.#
05890-61140
kit
22068
19231-60620
19231-60660
ea.
ea.
22069
23035
Direct Replacement Reducing Nut
• Made from high-quality stainless steel.
22078
• Meets original manufacturer’s equipment performance.
Description
Reducing Nut
Similar to
Agilent part #
18740-20800
qty.
ea.
cat.#
22078
Air Diverter for Agilent GCs
• Divert GC exhaust heat up and away from the lab bench.
• Meets or exceeds original manufacturer’s performance.
• Easy to install—no tools required.
• Compatible with 4" flexible metal dryer hose.
24323
Description
Air Diverter
for Agilent 5890/6890/7890 GCs
Similar to
Agilent part #
19247-60510,
G1530-80650
qty.
cat.#
ea.
22076
EPC Test Kit for Agilent 6890 GCs
Kit includes three O-rings, two plugs, one mounting screw, and
one test block.
Description
EPC Test Kit for Agilent 6890 GCs
Similar to
Agilent part #
G1530-60960*
qty.
kit
cat.#
24323
*Similar to Agilent part # G1530-60960, but not exact equivalent. Kits differ in parts.
1-800-356-1688 or 1-814-353-1300
www.restek.com
21
Tools
Inlet Liner Removal Tool
• Easily remove liner from injector—no
more burned fingers.
• Made from high-temperature silicone.
• Won’t chip or crack the liner.
No more burned fingers!
20181
MLE
Make Life
Easier!
22186
Description
Inlet Liner Removal Tool
qty.
3-pk.
cat.#
20181
Everything you need in one complete kit!
Make Life Easier (MLE) Capillary Tool Kit for Agilent GCs
26262
26261
The Claw and The Claw Holder Kit
• Easily removes hot liners from
injection ports.
• 4 mL vials (not included) can be
replaced when dirty.
Description
MLE Capillary Tool Kit for Agilent GCs
Never again will you have to burn
your fingers removing a hot injection
port liner. The Claw safely and cleanly
removes liners, O-rings, or other small
objects from the injection port. You
can then place the hot objects in a clean
4 mL vial situated in the Claw holder
until ready for reuse.
Description
The Claw
The Claw Holder Kit (includes The Claw and holder)
WISP 48 Snap Seal Vial
qty.
ea.
kit
100-pk.
cat. #
26261
26262
24658
Looking for autosampler vials?
Restek carries a full line of autosampler vials for
Agilent autosamplers. Visit www.restek.com and
search on autosampler vial.
www.restek.com
qty.
kit
22858
also available
22
• inlet liner removal tool
• septum puller
• mini wool puller/inserter tool
• 4-inch tapered needle file
• swivel head flashlight
• mini hand drill set
• 15 cm compact steel ruler
• pocket magnifier
• high-temperature string (1 meter)
• pipe cleaner (12-inch)
• cotton tip swabs (pk. of 25)
Includes:
• capillary installation gauge for Agilent GCs
• injector wrench for Agilent GCs
• septum nut removal tool
• 1/8", 3/16", and 1/4" nylon brushes
• 1/4", 3/8", and 3/16" stainless steel wire
tube brushes
• stainless steel surface brush
• 6 stainless steel jet reamers
(0.25–0.65 mm OD)
• 1/4" x 5/16" open end wrench
• 3/8" x 7/16" open end wrench
• 7/16" x 1/2" open end wrench
• 1/2" x 9/16" open end wrench
• rubber-tipped slide-lock tweezers
• scoring wafers
cat.#
22186
21044
Capillary Column Caps
• Attach to the column in seconds to form an airtight seal.
• Increase column lifetime—prevent moisture and air from
entering the column during storage.
• Two styles to choose from: glass or silicone material.
• Glass caps are color-coded for identifying detector and
injector ends.
• Not recommended for reuse.
Description
Capillary Column Caps
Capillary Column Caps
Material
glass
silicone
qty.
10-pk.
10-pk.
cat.#
21044
22858
1-800-356-1688 or 1-814-353-1300
Dual Column Analysis
20645
For use with
0.53 mm ID columns.
27185
1/8-Inch Capillary Inlet Adaptor Fitting Kit
(Split/splitless fitting for 0.53 mm ID capillary columns)
Inlet Adaptor Kit for Dual Column Installation
for Agilent Capillary Injectors (Split/splitless fitting for
capillary columns)
• 1/16-inch split/splitless fitting that accepts standard, twohole capillary ferrules.
• Easier to install capillary columns due to the nut protruding
farther from the insulated injection port chamber.
• Same column insertion depth as the original manufacturer’s
equipment.
• Kit includes adaptor fitting, 1/16" capillary nut, gold-plated
1.2 mm ID dual Vespel® ring inlet seal, one 0.4 mm ID twohole ferrule, and one 0.5 mm ID two-hole ferrule.
Description
Inlet Adaptor Kit for Dual Column Installation
for Agilent Capillary Injectors
1.2 mm ID Dual Vespel Ring Inlet Seal, Gold-Plated
qty.
cat.#
kit
27185
2-pk.
10-pk.
21246
21247
also available
Looking for more information or products on dual column analyses?
Visit www.restek.com
• 1/8-inch split/splitless fitting accepts standard two-hole
capillary ferrules and a standard 1/8-inch nut.
• Makes column installation easy due to the nut protruding
farther from the insulated injection port chamber.
• The column insertion depth is the same as the original
equipment.
• Kit includes adaptor fitting, capillary nut, stainless steel
inlet seal, washer, and one 0.8 mm ID two-hole ferrule.
• Use recessed taper liners with this adaptor.
Description
1/8-Inch Capillary Inlet Adaptor Fitting Kit
0.53 mm ID Dual-Column Installation
1/16-inch ID (Opening) Replacement Inlet Seal
cat.#
20645
20392
20393
Two-Hole Ferrules for 1/8-Inch
and 1/16-Inch Compression-Type
Fittings
• Use 1/16-inch, two-hole ferrules with the 1/16-inch capillary
inlet adaptor fitting kit (cat.# 27185)
• Use 1/8-inch, two-hole ferrules with the 1/8-inch capillary
inlet adaptor fitting kit (cat.# 20645).
Fitting Size
1/16"
1/16"
1/8"
1-800-356-1688 or 1-814-353-1300
qty.
kit
2-pk.
10-pk.
Ferrule ID
0.4 mm
0.5 mm
0.8 mm
Fits Column ID
0.25/0.28 mm
0.32 mm
0.45/0.53 mm
qty.
5-pk.
5-pk.
5-pk.
Vespel/Graphite
24848
24849
20246
www.restek.com
23
Packed Column Accessories
Direct Injection (DI) Inserts and Liner Adaptor
for 1/4-Inch Packed Column Injection Ports
(for 0.25, 0.32, & 0.53 mm ID columns)
DI Glass Inserts for Agilent 5890 Packed Column GC
• Tolerances closely controlled.
• Can be removed from the septum nut weldment.
Description
DI Glass Inserts
for Agilent 5890 Packed Column GC
(1.7 mm ID x 3.0 mm OD x 93 mm)
Similar to
Agilent part #
qty.
cat.#
5181-3382, 5080-8732
5-pk.
20967
DI Uniliner® Liners for Agilent 5890 Packed Column GC
• Press-Tight® taper forms dead-volume-free connection to
column.
• Minimizes solvent and peak tailing.
• Use with 0.25, 0.32, and 0.53 mm ID capillary columns.
• Can be removed from the septum nut weldment.
Description
DI Uniliner Liner
for Agilent 5890 Packed Column GC
(1.7 mm ID x 3.0 mm OD x 93 mm)
Fits same liner adaptor
as Agilent part #
5181-3382, 5080-8732
qty.
ea.
5-pk.
25-pk.
cat.#
20964
20965
20966
DI Liner Adaptor for Agilent 5890
Packed Column GC
• Uses standard 1/16-inch capillary nut
and ferrules.
• Convenient wrench pad at base.
• Includes 1/4-inch graphite ferrule and
stainless steel nut.
• Use with Agilent or Restek DI glass
inserts or Restek DI Uniliner® liners for
an Agilent 5890 packed column GC.
Description
DI Liner Adaptor for Agilent 5890
Packed Column GC
Similar to
Agilent part #
qty.
cat.#
19244-80540
ea.
21303
Siltek® Septum Packed Purge Port Weldment
for Agilent 5890 GCs
Siltek® treatment makes weldment inert
and eliminates adsorption of sensitive
compounds (e.g., DDT and Endrin).
Order Viton® O-rings (below) and appropriate septa separately. See page 12.
Description
Siltek Septum Packed Purge Port
Weldment for Agilent 5890 GCs
Viton Replacement O-rings
Similar to
Agilent part #
qty.
cat.#
19243-80570
ea.
21691
5080-8898
10-pk.
21685
Micropacked Inlet Conversion Kits
• Convert a capillary GC split/splitless inlet for use with 1/16" OD micropacked
columns.
• For use with Agilent 5890, 6890, and 7890 GCs.
• Sample pathways deactivated for ultimate inertness.
Description
Micropacked Column Adaptor Kit for Split/Splitless Injection*
Complete kit with FID and injection port adaptors
Kit includes: dual Vespel ring inlet seal, large bore; reducing nut, large bore; FID adaptor, large bore;
1/4" ferrule, Vespel/graphite; 1/4" nut, stainless steel; 1/16" ferrules, Vespel/graphite (2); 4 mm splitless
liner, intermediate polarity deactivated; 1/16" nuts, stainless steel (2)
Micropacked Column Adaptor Kit for On-Column Injection*
Complete kit with FID and injection port adaptors
Kit includes: dual Vespel ring inlet seal, large bore; reducing nut, large bore; FID adaptor, large bore;
1/4" ferrule, Vespel/graphite; 1/4" nut, stainless steel; 1/16" ferrules, Vespel/graphite (2); Siltek treated
metal liner installation guide; 1/16" nuts, stainless steel (2)
Micropacked Column Adaptor Kit for Split/Splitless Injection
Injection Port Adaptor Kit
Kit includes: dual Vespel ring inlet seal, large bore; reducing nut, large bore; 1/16" ferrule, Vespel/
graphite; 1/16" nut, stainless steel; 4 mm splitless liner, intermediate polarity deactivated
Micropacked Column Adaptor Kit for On-Column Injection
Injection Port Adaptor Kit
Kit includes: dual Vespel ring inlet seal, large bore; reducing nut, large bore; 1/16" ferrule, Vespel/
graphite; Siltek treated metal liner installation guide; 1/16" nut, stainless steel
Micropacked Column Adaptor Kit for FID*
FID Adaptor Kit
Kit includes: FID adaptor, large bore; 1/4" ferrule, Vespel/graphite; 1/4" nut, stainless steel; 1/16" nut,
stainless steel; 1/16" ferrule, Vespel/graphite
Replacement Inlet Seals for Micropacked Column Adaptor
Dual Vespel ring inlet seal, large bore (2)
Replacement Metal Liner Installation Guide for On-Column Injection, Siltek Treated
Replacement 4 mm Splitless Liner
*For use with packed column FIDs only.
24
www.restek.com
Large-Bore Dual Vespel® Ring Inlet Seals
qty.
cat.#
kit
22424
1/4"
kit
SS Nut
Large-Bore
FID Adaptor
22425
1/4"
kit
22426
kit
22427
Vespel®/Graphite
Ferrule
Large-Bore
Reducing Nut
1/16"
SS Nuts
1/16" Vespel®/
Graphite Ferrules
kit
22428
2-pk.
22429
22430
ea.
ea.
22430
20772
20772
1-800-356-1688 or 1-814-353-1300
GC-MS Accessories
EZ No-Vent® GC Column-Mass Spectrometer Connector
for Agilent GCs with 5971/5972, 5973, or 5975 GC-MS
• Change GC-MS columns in minutes without venting—
100 µm transfer line maintains vacuum and eliminates the
need to vent.
• Easy to install and maintain—no special tools or plumbing
required.
• Gold-plated body for inertness.
• High-temperature polyimide ferrules eliminate leaks at the
problematic transfer line fitting.
• Lower cost than other “no-vent” fittings.
We designed the EZ No-Vent® GC column-mass spectrometer
connector to be simple and easy to use. A critical orifice in the
EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas as
is required for other manufacturers’ vent systems. This enables
you to skip the lengthy vent and pump-down cycle otherwise
required when you make a column change, saving nearly a day
of down-time with each column change. The EZ No-Vent® connector easily attaches to the MS source without special tools or
extra plumbing.
Figure 2: Sharp, symmetric peaks for gases show the EZ No-Vent®
connector does not add dead volume and allows rapid column
changes.
1st Column, Equilibrated System
Rtx®-624, 60 m, 0.25 mm ID, 1.4 µm (cat# 10969),
column direct to source.
GC_EV00659a
Acquired 76 minutes after installing 2nd column
Rtx®-624, 60 m, 0.25 mm ID, 1.4 µm (cat# 10969) using
EZ No-Vent® connector.
Figure 1 shows the internal structure of the connector. Figure 2
illustrates the high performance achieved with the EZ No-Vent®
connector.
GC-MS
Interface
Transfer
Line
Transfer
Line
Ferrule
Figure 1: The EZ No-Vent®
connector incorporates a
laser-machined orifice for optimal flow through the fitting.
Coupled with the 100 µm ID
transfer line, it minimizes the
amount of oxygen entering
the MS, which eliminates the
need for purge gases as in
other manufacturers’ systems.
EZ No-Vent®
Connector
Column
Sample
Laser drilled
to 100 µm ID
Capillary
Ferrule
GC_EV00659b
Capillary
Column
Capillary
Nut
restek
innovation!
Kit installs easily,
without special
tools or plumbing.
1-800-356-1688 or 1-814-353-1300
Change columns in
minutes—without
venting!
Injection
Inj. Temp.:
Oven
Oven Temp:
Carrier Gas
Flow Rate:
1.
2.
3.
4.
5.
6.
7.
Peaks
Dichlorodifluoromethane
1,2-Dichlorotetrafluoroethene (Freon® 114)
Chloromethane
Vinyl chloride
Bromomethane
Chloroethane
Trichlorofluoromethane
Rtx®-624, 60 m, 0.25 mm
ID, 1.40 µm (cat.# 10969)
502.2 calibration mix #1
(gases) (cat.# 30042)
Purge and trap split
300 °C
60 °C
He, constant flow
1.0 mL/min.
Detector
Transfer Line Temp.:
Analyzer Type:
Tune Type:
Ionization Mode:
Scan Range:
Instrument
Agilent 5973 GC-MS
280 °C
Quadrupole
BFB
EI
35-550 amu
Agilent/HP6890 GC
Description
qty.
cat.#
EZ No-Vent Connector Kit
includes: EZ No-Vent connector, two 0.4 mm ID adaptor ferrules for
capillary column, two 0.4 mm ID ferrules for transfer line, 100 µm
deactivated transfer line (3 ft.), column plug, column nut
kit
21323
2-pk.
2-pk.
21015
21016
2-pk.
21043
3 ft.
20-pk.
5-pk.
2-pk.
21018
23100
23112
20110
Replacement ferrules for connecting capillary column
to EZ No-Vent connector:
0.4 mm (Polyimide)
0.5 mm (Polyimide)
Replacement ferrules for connecting transfer line
to EZ No-Vent connector: 0.4 mm ID
Replacement 100 µm deactivated transfer line
Replacement EZ No-Vent Column Nut
Replacement EZ No-Vent Plug
Open-End Wrenches, 1/4" x 5/16"
www.restek.com
25
GC-MS Accessories
21314
restek innovation!
MSD Conversion Fitting
• A flat, soft aluminum sealing
ring deforms and butt-seals
against the MSD interface.
• A standard Vespel® ferrule seals the column and 1/16-inch
stainless steel nut.
• Fitting is constructed of nickel-plated brass for longevity and
softness.
• Use any standard Vespel® or Vespel®/graphite 1/16-inch
ferrule.
• Includes a 1/16-inch stainless steel nut and two replacement
sealing rings. Order ferrules separately.
• Improved design reduces chance of leaks.
Agilent Design
Butt-seal with
ferrule.
Column seals
only at taper.
21894
Capillary Installation Gauge for Agilent 5973/5975 MS
• Seats ferrules onto column for consistent installations.
• Made from high-quality stainless steel.
Install the nut and ferrule
onto the column, then insert
the column through the
installation tool, exposing
several centimeters at the
exit end. Tighten the nut
(not depicted).
Description
Capillary Installation Gauge
for Agilent 5973/5975 MS
Score and remove
the exposed end
of the column.
Loosen the nut.
Similar to
Agilent part #
qty.
cat.#
G1099-20030
ea.
21894
price
Improved Restek Design
24699
Gold Tip Transfer Line
Crunch
washer forms
leak-tight
seal—easier
to remove.
Shoulder
strength
increased.
Description
MSD Conversion Fitting
Replacement Ring Seal for MSD Conversion Fitting
Ferrule seals
against both
column and
fitting.
qty.
ea.
2-pk.
cat.#
21314
21313
• For use with Agilent 5971/5972 MS Systems.
• Gold-plated for inertness.
• Meets or exceeds original manufacturer’s performance.
Description
Gold Tip Transfer Line
Similar to
Agilent part #
05971-20305
qty.
ea.
cat.#
24699
qty.
1 kg
cat.#
22685
For ferrules, see page 35.
Ion Source Cleaning Powder
MSD Source Nut
• 1.2 mm nut bore permits easy removal of ferrules with a
standard tapered-needle file (cat.# 20106).
• Made of brass to prevent thread-stripping on the transfer
line.
• Design enhances ease of threading onto the transfer line and
improves overall lifetime.
Description
(Detector) MSD Source Nut
26
www.restek.com
Similar to
Agilent part #
05988-20066
qty.
2-pk.
Use this aluminum oxide powder to
clean surfaces that contact the sample
or ion beam when you encounter
poor sensitivity and inadequate abundances at high masses.
Description
Ion Source Cleaning Powder
Similar to
Agilent part #
8660-0791
22685
20643
cat.#
20643
1-800-356-1688 or 1-814-353-1300
GC-MS Accessories
Inland 45 is the highest-quality rough pump oil you can
use for your mass spectrometer.
Inland 45 Pump Oil
Recommended for most mass spectrometers.
• Ease at cold start.
• Low vapor pressure 10-7 torr.
• Nontoxic and noncorrosive.
• Compatible with buna-N, neoprene, and
Viton® seals.
• Optimum vacuum pump performance.
• Lowest mass spectrometer background.
• Recommended for optimum mass spec
performance.
Description
Inland 45 Pump Oil
Similar to
Agilent part #
6040-0834
27194
24819
GC-MS Cleaning Kit
qty.
1 liter
cat.#
24819
Rough Pump Oil #19 for MSD Pumps, Oil
Vacuum Pump
Description
Rough Pump Oil for MSD Pumps
22687
• Formulated from crude oil stocks known for
their durability and line-lubricating qualities.
• Use in Agilent 5973/5972/5971 and GCD
mass spec systems, or in other manufacturers’
MSD systems that require rough pump oil.
• Under average use, the oil in the foreline
rough pump should be replaced every six
months.
qty.
1 liter
cat.#
22687
ETP Electron Multipliers
for Mass Spectrometry
• Air stable.
• 2-year shelf life guarantee.
• Discrete dynode design
extends operating life.
The multi-dynode approach
23074
of all ETP multipliers results
in longer lifetimes and better sensitivities compared with channel multipliers because of greater surface area.
The electron multipliers manufactured by ETP use a proprietary dynode material. This material has a number of properties
that make it very suitable for use in an electron multiplier. It
has very high secondary electron emission, which allows exceptional gain to be achieved from each dynode. This material is
also very stable in air. In fact, an ETP multiplier can be stored
for years before being used. As a direct result of the high stability of the active materials used in ETP multipliers, they come
with a 2-year shelf life warranty (stored in original sealed package). Many testing laboratories take advantage of this long shelf
life by keeping a replacement ETP multiplier on hand, ready for
immediate installation. This keeps instrument downtime to a
minimum.
1-800-356-1688 or 1-814-353-1300
The Restek GC-MS Cleaning Kit
(cat.#s 27194, 27195) includes:
• lint-free nylon gloves (small-2 pair)
• lint-free nylon gloves (large-2 pair)
• lint-free cotton cloth, 9 x 9 (10-pk.)
• micro mesh 4 x 6 sheet (4-pk.)
• aluminum oxide (1-kg jar)
• cotton tip applicators
• tweezers, large
• tweezers, small
• septum puller
• Dremel® tool, battery-operated (optional, 27194)
• tool kit bag
Reorder Kit (cat.# 27196) includes:
• lint-free nylon gloves (small-2 pair)
• lint-free nylon gloves (large-2 pair)
• lint-free cotton cloth, 9 x 9 (10-pk.)
• micro mesh 4 x 6 sheet (4-pk.)
Poor sensitivity, loss of sensitivity at high masses, or high multiplier gain during an auto tune are all indicators that your mass
spectrometer source may need to be cleaned. Restek has assembled all of the necessary components for cleaning and polishing
your ion source.
Description
Mass Spec Cleaning Kit with Dremel Tool
Mass Spec Cleaning Kit without Dremel Tool
Mass Spec Cleaning Kit Replacement Parts Kit
Includes: cloths, micro mesh sheets, small and large gloves
qty.
kit
kit
cat.#
27194
27195
kit
27196
did you know?
A typical ETP electron multiplier has a total active dynode surface area
of ~1,000 mm2 compared to a standard continuous dynode multiplier
that only has a total channel surface area of around 106 mm2. The
increased surface area of the ETP slows the aging process and improves
operating life.
Description
Electron Multipliers for Agilent GC-MS and LC-MS
For Agilent 5970 GC-MS
For Agilent 5971, 5972, GC GC-MS
For Agilent 5973 & 5975 GC-MS
(includes mount for initial installation)*†
For Agilent 5973 & 5975 GC-MS and LC-MSD
(Replacement Multiplier)*†
qty.
cat.#
ea.
ea.
23072
23073
ea.
23074
ea.
23075
*Note: The electron multipliers have been specifically developed to retrofit the original
manufacturer’s equipment. The detector incorporates a modular design to facilitate ease
of replacement and additional innovations intended to enhance performance. First-time
installation requires a mount that includes the mechanical housing. After initial installation, only the replacement electron multiplier is required.
†This unit is designed for use in the 5975, 5973 GC, and the LC-MSD (not for 5975C Triple
Axis Detector).
Other ETP electron multipliers are available upon request. Call us or contact your Restek
representative if you do not see your instrument listed.
www.restek.com
27
FID Accessories
22068
23052
23035
23041
22069
Heater Cartridge & Platinum Resistance Thermometer
(PRT) Sensor for Agilent 5890 GCs
• Use with 5890 FID and split/splitless weldments.
• Meets or exceeds original manufacturer’s performance.
Description
Injector/FID Heater and Injector/FID
PRT Sensor
Injector/FID Heater
Injector/FID PRT Sensor
Similar to
Agilent part #
qty.
cat.#
05890-61140
kit
22068
19231-60620
19231-60660
ea.
ea.
22069
23035
23053
FID Base Weldment for Agilent GCs
• Meets or exceeds original manufacturer’s performance.
• Includes brass nut.
• Available for Agilent 5890, 6850, or 6890 GCs.
Description
FID Base Weldment
for Agilent 5890 GCs
FID Base Weldment, Pack Column FID
for Agilent 6850/6890 GCs
FID Base Weldment, Capillary Column FID
for Agilent 6850/6890 GCs
Similar to
Agilent part #
qty.
cat.#
19231-80580
ea.
23041
G1531-80580
ea.
23052
G1531-80630
ea.
23053
Note: 6890 GC connections to EPC modules are not compatible with the 7890 EPC
modules.
23045
23064
FID Collector Housing Kits for Agilent GCs
• Meets or exceeds original manufacturer’s performance.
• Available for Agilent 5890, 6890, or 7890 GCs.
Description
FID Collector Housing Kit for Agilent 5890
GCs (includes collector body, spanner
nut, and silicone washer—order mount
separately)
FID Collector Housing Kit for Agilent
6890/7890 GCs (includes collector body,
silicone washer, nut, and mount)
FID Collector Housing
for Agilent 6890/7890 GCs
Replacement Silicone Washers for FID
Collector Housing
for Agilent 5890/6890/7890 GCs
Similar to
Agilent part #
qty.
cat.#
19231-20920
kit
23037
G1531-20550
kit
23045
G1531-20740
ea.
23044
5180-4165
12-pk.
23064
23036
Spanner Wrench for Agilent
5890/6890/6850/7890 FID Collector
Assemblies
• Easily remove the nut from the FID
collector without damaging the nut.
• Unique, ergonomic handle—easy to grip.
• Fits all instrument models.
22329
Remove FID ignitor castle.
Easily loosen the nut by aligning
the two pins on the bottom of the
wrench with the two open slots on
the nut...
...then turn counterclockwise...
...and remove.
23043
FID Collector Mount for Agilent GCs
• Meets or exceeds original manufacturer’s performance.
• Available for Agilent 5890, 6890, or 7890 GCs.
Description
FID Collector Mount
for Agilent 5890 GCs
FID Collector Mount
for Agilent 6890/7890 GCs
28
www.restek.com
Similar to
Agilent part #
qty.
cat.#
19231-20930
ea.
23036
G1531-20550
ea.
23043
Description
Spanner Wrench
for Agilent 5890/6890/6850/7890 FID
Collector Assembly
Similar to
Agilent part #
qty.
cat.#
19231-00130
ea.
22329
1-800-356-1688 or 1-814-353-1300
FID Accessories
21137
21137
21001
23010
21001
21699
21136
21136
21138
21139
FID Collector Assembly Kit for Agilent 5890 GCs
• Constructed of high-quality stainless steel.
• Meets or exceeds original manufacturer’s performance.
• Individual replacement parts available.
Description
FID Collector Assembly Kit
(includes insulators)
FID Collector Assembly Kit
w/Siltek Ignitor Castle
FID Collector (includes insulators)
FID Collector Nut and Washer
FID Ignitor*
FID Ignitor Castle
Siltek FID Ignitor Castle
Similar to
Agilent part #
qty.
cat.#
19231-60690
kit
23010
kit
21131
ea.
21138
set
21136
ea.
ea.
ea.
21001
21137
21135
19231-20970,
19231-20960,
19231-20950
FID Collector Assembly Kit for Agilent 6890/6850/7890 GCs
• Constructed of high-quality stainless steel.
• Meets or exceeds original manufacturer’s performance.
• Individual replacement parts available.
Description
FID Collector Assembly Kit
(includes insulator)
FID Collector Assembly Kit
w/Siltek Ignitor Castle
FID Collector (includes insulators)
FID Collector Nut and Washer
19231-20940,
5181-3311
19231-60680
19231-20910
FID Ignitor*
FID Ignitor Castle
Similar to
Agilent part #
qty.
cat.#
G1531-60690
kit
21699
kit
21132
ea.
21139
set
21136
ea.
ea.
21001
21137
G1531-20690,
G1531-20700
19231-20940,
5181-3311
19231-60680
19231-20910
*Also fits OI Analytical 4410 detector (similar to OI part # 191833).
*Also fits OI Analytical 4410 detector (similar to OI part # 191833).
FID Maintenance Kits for Agilent GCs
• Include the most common consumable GC supplies and tools.
• All parts meet or exceed performance of instrument
manufacturers’ parts.
• Parts list makes reordering easy.
21000
FID Flow Measuring Adaptor
for Agilent 5890/6890/6850/7890 GCs
• Makes setting flows easy.
• Meets or exceeds original manufacturer’s performance.
Description
FID Flow Measuring Adaptor
Similar to
Agilent part #
19301-60660
qty.
ea.
cat.#
21000
FID Gauge Pack
for Agilent 5890 GCs
• Pressure regulators and gauges for
air & hydrogen.
• 1/8-inch bulkhead allows easy
hookup to instrument.
• Rated for inlet pressures to 250 psi
(1,724 kPa).
• Rated for outlet pressures of 0 to
60 psi (0–414 kPa).
Description
FID Gauge Pack for Agilent 5890 GCs
1-800-356-1688 or 1-814-353-1300
22071
qty.
ea.
cat.#
22071
FID kits include:
• 1/4" and 0.4, 0.5, and 0.8 mm ID graphite
ferrules.
• FID/NPD capillary adaptor.
• Capillary nuts.
• Jet reamers/ferrule removers.
• 1/4" nut.
• Scoring wafer.
• Capillary column caps.
• Ignitor for either Agilent 5890 or
6890/6850/7890 GCs.
• FID flow-measuring adaptor.
• 1/4" x 5/16" wrench.
• Installation gauge.
• Wire cleaning brush.
• High-performance Siltek® treated
FID jet for either Agilent 5890 (adaptable
jet) or 6890/6850/7890 (dedicated jet) GCs.
• Spanner wrench.
• FID jet removal tool.
Description
FID Maintenance Kit for Agilent 5890 GCs
FID Maintenance Kit for Agilent 6850/6890/7890 GCs
22179
qty.
kit
kit
cat.#
22180
22179
www.restek.com
29
FID Accessories
FID Replacement Jets
Standard Version
• Threads specially coated for easy installation and removal.
• Special processing ensures the highest degree of cleanliness.
• Meets or exceeds original manufacturer’s performance.
High-Performance Version—Siltek® Treated
• Similar to the standard version, but Siltek® treated.
• Extremely inert, for use with active compounds.
Capillary Adaptable FID Replacement Jet for Agilent 5890/6890/6850 GCs
• Engineered with a fluted tip to guide the capillary column into the jet.
61.5
mm
Description
Standard, 0.011-Inch ID Tip
High-Performance Siltek Treated,
0.011-Inch ID Tip
Similar to
Agilent part #
19244-80560
qty.
ea.
cat.#
20670
qty.
3-pk.
cat.#
20671
19244-80560
ea.
20672
3-pk.
20673
Capillary Dedicated FID Replacement Jet for Agilent 6890/6850/7890 GCs
Description
Standard, 0.011-Inch ID Tip
High-Performance Siltek Treated,
0.011-Inch ID Tip
High-Temperature, 0.018-Inch ID Tip
43 m
m
Similar to
Agilent part #
G1531-80560
qty.
ea.
cat.#
21621
qty.
3-pk.
cat.#
21682
G1531-80560
ea.
21620
3-pk.
21683
G1531-80620
ea.
23078
3-pk.
23079
Packed Column FID Replacement Jets for Agilent 5890/6890/6850 GCs
• 0.018-inch ID jets: Used for most general-purpose packed column applications.
• 0.030-inch ID jets: For packings that exhibit high bleed and that frequently clog the
tip of smaller 0.018-inch jets.
Description
Standard, 0.018-Inch ID Tip
High-Performance Siltek Treated,
0.018-Inch ID Tip
63.5
mm
Description
Standard, 0.030-Inch ID Tip
High-Performance Siltek Treated,
0.030-Inch ID Tip
Similar to
Agilent part #
18710-20119
qty.
ea.
cat.#
21694
qty.
3-pk.
cat.#
21695
18710-20119
ea.
21696
3-pk.
21697
Similar to
Agilent part #
18789-80070
qty.
ea.
cat.#
21688
qty.
3-pk.
cat.#
21689
18789-80070
ea.
21686
3-pk.
21687
FID Jet Removal Tool for Agilent 5890/6890/6850/7890 FIDs
• Securely grips jet in socket for easy removal or installation.
• Unique, ergonomic handle—easy to hold.
22328
Slip tool over FID jet...
...loosen jet...
Description
FID Jet Removal Tool for Agilent 5890/6890/6850/7890 FIDs
30
www.restek.com
...and remove.
qty.
ea.
cat.#
22328
1-800-356-1688 or 1-814-353-1300
FID, NPD, ECD Accessories & Cables
Torx® Screwdriver Set
FID/NPD Capillary Adaptor Fitting
• Set includes TR-10, TR-15,
and TR-20.
• Ideal for performing routine
maintenance on Agilent 6890
and 7890 GCs.
for Agilent 5890/6890/6850 GCs
• High-quality stainless steel construction.
22077
• Meets or exceeds original manufacturer’s performance.
23034
Description
Torx Screwdriver Set
qty.
set
cat.#
23034
Similar to
Agilent part #
19244-80610
Description
FID/NPD Capillary Adaptor Fitting
qty.
ea.
cat.#
22077
Torx® is a registered trademark of Textron Inc.
21302
27192
20120
21301
ECD/FID Dual-Purpose Make-Up Gas Kit
Use with
ANY
injection
FID/Injector Cleaning Kit
for Agilent 5890 GCs
Kit includes: replacement fitting, 1/4” nut, Vespel®/graphite ferrule,
1/16” nut, 0.4 mm ID graphite ferrule, Siltek®-treated guide.
port!
The FID/Injector Cleaning Kit includes:
• Nylon tube brushes (1/8", 3/16", 1/4").
• Pipe cleaner.
• Stainless steel tube brushes (3/8", 3/16", 1/4").
• Stainless steel surface brush.
• Stainless steel jet reamers.
• Emery cloth.
Description
FID/Injector Cleaning Kit
qty.
kit
27190
cat.#
20120
Description
ECD/FID Replacement Fitting Kit
with Flow Manifold Connection
Replacement ECD Siltek Metal Guide
Replacement ECD Fused Silica Liner
Replacement Micro ECD Liner
Injector/Detector Plug Nuts
21883
• Use to cap off an injector to isolate leaks.
• Use to cap off a detector for thermal cleaning.
• Use to check a detector or make-up gas flow rate.
• Use to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.
Description
Injector/Detector Plug Nuts
Similar to
Agilent part#
5020-8294
qty.
2-pk.
Similar to
Agilent part #
19233-20625
G2397-20540
qty.
cat.#
kit
21301
2-pk.
ea.
5-pk.
ea.
5-pk.
21302
27192
27193
27190
27191
Replacement Cables
for Agilent GCs, Integrators, & Autosamplers
• Considerable savings over original manufacturer’s equipment.
• Instructions and wiring diagrams included.
• Manufactured with only the highest-quality components.
cat.#
21883
20657
Connect an Agilent 5890 GC to remote-start another piece of
equipment or to start the Agilent 5890 GC from that piece of
equipment.
20884
Description
Replacement Cable
FID/NPD
Adaptor Fitting
• Easy-to-use, sturdy, compact stainless steel fitting.
• 1/16-inch nut uses standard graphite or Vespel®/graphite
ferrules.
• Wrench pad won’t turn when installing a capillary column.
• Includes 1/4- and 1/16-inch stainless steel nuts, and 1/4-inch
Vespel® and 0.4 mm ID graphite ferrules.
Description
FID/NPD Adaptor Fitting
1-800-356-1688 or 1-814-353-1300
qty.
kit
cat.#
20884
Similar to
Agilent part #
05890-61080
length
6 ft.
qty.
ea.
cat.#
20657
20652
Connect an Agilent 5890 GC to a non-Agilent integrator or
standard strip chart recorder.
Description
Replacement Cable
Similar to
Agilent part #
05890-60800
length
6 ft.
qty.
ea.
cat.#
20652
www.restek.com
31
Autosampler Replacement Parts
Replacement Parts for Agilent Autosamplers
• All parts meet or exceed original manufacturer’s performance.
21237
22692
Carriage Motor Belt for Agilent 7673A & 7683B
21172
Autosamplers
Meets original manufacturer’s performance.
22343
Similar to
Agilent part #
1500-0676
Description
Carriage Motor Belt for Agilent 7673A and 7673B
Injector Mounting Posts and Parking Post
for Agilent 7673 & 7683 Autosamplers
qty.
ea.
cat.#
22692
Performance equivalent to original manufacturer’s parts.
Description
Injector Mounting Post
for Agilent 7673 Series Autosamplers
for use with 6890 GCs
Injector Mounting Post
for Agilent 7683 Series Autosamplers
for use with 6850/6890 GCs
Parking Post
for Agilent 7673/7683 Series Autosamplers
for use with 5890/6890/7890 GCs
Similar to
Agilent part #
qty.
cat.#
07673-21140
ea.
21237
G2613-20500
ea.
21172
05890-61525
ea.
22343
22363
Z-Belt for Agilent 7673B Autosamplers
Meets original manufacturer’s performance.
Description
Z-Belt for Agilent 7673B Autosamplers
Similar to
Agilent part #
1500-0803
qty.
ea.
cat.#
22363
22855
Turret Tray Assembly for Agilent 7673 Autosamplers
Holds sample, waste, and solvent vials.
Description
Turret Tray Assembly
for Agilent 5890/6890 GC
Similar to
Agilent part #
qty.
cat.#
07673-60605
ea.
22855
22337
Injector Turret Motor for Agilent 7673A & 7673B Injectors
Meets original manufacturer’s performance.
Description
Injector Turret Motor for Agilent 7673A &
7673B Injectors
Similar to
Agilent part #
qty.
cat.#
07673-60810
ea.
22337
22695
Autosampler Plunger Carrier Belt
for Agilent 7673A & 7673B Autosamplers
All parts meet or exceed original manufacturer’s performance.
Description
Autosampler Plunger Carrier Belt
32
For Agilent
Model #
7673A, 7673B
www.restek.com
Similar to
Agilent part #
07673-61275
qty.
ea.
cat.#
22695
1-800-356-1688 or 1-814-353-1300
Nuts
Brass
21040
Stainless Steel
Capillary Column Nuts for Agilent 5890/6890/7890 GCs
Description
For use with “compact” Agilent-style ferrules.
Stainless Steel Capillary Column Nut
Brass Capillary Column Nut
For use with standard 1/16"-type ferrules.*
Stainless Steel Capillary Column Nut
Brass Capillary Column Nut
Finger-Tight Capillary Column Nuts
• Allow wrench-free column installations.
• Work with standard or compact (Agilent-style) ferrules.
• Made from high-quality stainless steel.
Available in brass or stainless steel.
...or for use with standard ferrules.
Choose for use with "compact"
Agilent-style ferrules...
21041
Similar to
Agilent part #
qty.
cat.#
5181-8830
5181-8830
2-pk.
2-pk.
21884
21878
05921-21170
05921-21170
2-pk.
2-pk.
20883
21879
Similar to
Description
Agilent part #
For use with “compact” Agilent-style ferrules.
5020-8293, 5020Finger-Tight Capillary Column Nuts
8292
For use with standard 1/16"-type ferrules.
5020-8293, 5020Finger-Tight Capillary Column Nuts
8292
qty.
cat.#
2-pk.
21040
2-pk.
21041
21034
*Designed to fit a wider variety of 1/16" ferrules
21399
Easily seat ferrules for consistent installations!
Capillary Installation Gauge for Agilent GCs
Hot Swap Capillary Column Nuts
22347
• No more burned fingers!
• No more downtime waiting for injector parts to cool down.
Never worry again about burned fingers or having to wait for
the injector to cool down. The Hot Swap capillary column nut
allows you to change your capillary column while the injector
temp is still hot.
Description
For use with “compact” Agilent-style ferrules.
Hot Swap Capillary Column Nut
For use with standard 1/16"-type ferrules.
Hot Swap Capillary Column Nut
qty.
cat.#
ea.
22348
ea.
22347
• Seats graphite* ferrules onto column for consistent
installations.
• Prevents crushed column ends.
• Made from high-quality stainless steel.
Description
Capillary Installation Gauge
for Agilent-style fittings (compact ferrules)
Capillary Installation Gauge
for 1/16" fittings (1/16" ferrules)
qty.
cat.#
ea.
21034
ea.
21399
*For use with graphite ferrules only.
NOTE: For proper operation, oven fan must be kept operational during change out or risk
of burn may occur.
Did you know Restek
sells gas generators?
Visit www.restek.com/gas
for more information.
1-800-356-1688 or 1-814-353-1300
www.restek.com
33
Scoring Wafer with Handle
Septum Puller
• Ceramic wafer is straightedged for cutting fused
silica tubing cleanly.
• Unique, ergonomic handle
is made of soft, comfortable
rubber.
• Use hooked end for removing septa and O-rings;
pointed end works well for removing stuck ferrules
or debris.
• Keep several on hand in your laboratory—can be
used in many different ways.
23015
Remove septum without
damaging an expensive
weldment.
Hold tubing firmly in
one hand, allowing
about two inches to
extend freely. Hold
the scoring wafer at
a 45° angle to the
tubing. Exert just
enough pressure to
put a slight arc in the
tubing. Pull perpendicularly across the
tubing.
The tubing should
fall off on its own, or
it should easily break
at the score with
a slight tap of the
wafer.
Check the cut
against the white of
the scoring wafer.
Look for a clean,
square cut.
Dislodge a stuck ferrule
quickly and easily—without
scoring the fitting.
Description
Septum Puller
MLE
Make Life Easier!
20117
Column Installation Tools
qty.
ea.
cat.#
20117
save money!
Save money on column installation tools by purchasing the
MLE Capillary Tool Kit. See page 22.
Sapphire Scribe
Description
Scoring Wafer with Handle
qty.
2-pk.
cat.#
23015
• Cuts fused silica tubing.
• Produces a clean, square cut.
20182
Ceramic Scoring Wafer
• Four straight scoring edges for
cutting fused silica tubing and four
serrated edges for cutting MXT®
metal capillary columns.
One quick stroke...
20116
...and just a tap leaves a clean,
square end.
Description
Sapphire Scribe
qty.
ea.
cat.#
20182
23027
Shortix® Capillary GC Column Cutter
Description
Ceramic Scoring Wafers
34
www.restek.com
Check the cut against the white
of the scoring wafer. Look for a
clean, square cut.
qty.
5-pk.
cat.#
20116
Description
Shortix Capillary GC Column Cutter
Maintenance Kit for Shortix Capillary GC Column Cutter (Includes:
diamond cutting wheel, O-rings, and a tool to open the column cutter)
23026
Exert just enough pressure to put
a slight arc in the tubing. Pull perpendicularly across the tubing.
The tubing should fall off or break
with a slight tap of the wafer.
• Consistently make precise, clean, square
cuts with a diamond blade.
• Built-in magnifier to verify square cut.
• Use with 0.25 mm ID to 0.53 mm ID
tubing (0.78 mm OD maximum).
qty.
ea.
cat.#
23026
kit
23027
1-800-356-1688 or 1-814-353-1300
Ferrules
Vespel® Ferrules
• 100% high-temperature polyimide.
• Stable to 350 °C.
• Durable, leak-tight.
tech tip
Graphite Ferrules
Vespel® ferrules
• Preconditioned to eliminate out-gassing.
• High-purity, high-density graphite.
• Smoother surface and cleaner edges than conventional graphite ferrules.
• Contain no binders that can off-gas or adsorb analytes.
• Stable to 450 °C.
Vespel®/Graphite Ferrules
• 60%/40% Vespel®/graphite blend offers the best combination of sealing and ease of
workability.
• Sealed with minimal torque, reusable, and preferred for vacuum and high-pressure
uses.
• Stable to 400 °C.
• Recommended for mass spec transfer lines.
Choosing the Right Ferrule
Graphite ferrules are soft, easy to seal, stable
to 450 °C, and contain no binders that might
off-gas. Vespel®/graphite ferrules work better
for vacuum and high-pressure applications
(e.g., GC-MS) because they will not fragment
or allow oxygen to permeate into the system,
whereas graphite ferrules will. Because Vespel®
and graphite ferrules are made from a harder
material, they might require retightening
after several temperature cycles. Alumaseal®
ferrules are ideal for GC-MS. They will not crack
or fragment and require no retightening after
temperature cycles.
Capillary Ferrules for 1/16-Inch Compression-Type Fittings
Available in Vespel®, graphite, or Vespel®/graphite.
Ferrule ID
0.3 mm
0.4 mm
0.4 mm
0.5 mm
0.5 mm
0.6 mm
0.8 mm
0.8 mm
1.0 mm
1.2 mm
1.6 mm
Fits Column ID
qty.
10-pk.
10-pk.
50-pk.
10-pk.
50-pk.
10-pk.
10-pk.
50-pk.
10-pk.
10-pk.
10-pk.
0.10/0.15/0.18/0.25/0.28 mm
0.10/0.15/0.18/0.25/0.28 mm
0.32 mm
0.32 mm
0.28 mm**
0.45/0.53 mm
0.45/0.53 mm
0.75 mm*
0.75 mm*
1.00 mm*
Vespel
22213
22214
—
22215
—
—
22216
—
22217
22218
—
—
—
—
—
—
Graphite
Vespel/Graphite
20233
20275
20200
20211
20227
20229
20201
20212
20228
20231
—
—
20232
20202
20213
20224
20230
21058
24912
—
—
—
—
21060
—
—
graphite ferrules
Encapsulated Ferrules for 1/16-Inch Compression Fittings
• Reusable—will not deform and stick in fittings.
• Less torque needed to seal ferrule.
• Restek’s unique blend of graphite minimizes fragmentation and out-gassing.
Ferrule ID
0.4 mm
0.5 mm
0.8 mm
Fits Column ID
0.25 mm
0.32 mm
0.53 mm
qty.
10-pk.
10-pk.
10-pk.
cat.#
21036
21037
21038
graphite ferrules
Compact Ferrules for Agilent 5890/6890/6850/7890 GCs
Available in graphite or Vespel®/graphite.
Ferrule ID
0.4 mm
0.4 mm
0.5 mm
0.5 mm
0.8 mm
0.8 mm
1.0 mm
1.6 mm
Fits Column ID
0.25/0.28 mm
0.25/0.28 mm
0.32 mm
0.32 mm
0.45/0.53 mm
0.45/0.53 mm
0.75 mm*
1.00 mm*
qty.
10-pk.
50-pk.
10-pk.
50-pk.
10-pk.
50-pk.
10-pk.
10-pk.
Graphite
20250
20251
21007
21008
20252
20253
21059
21061
Vespel/Graphite
20238
20239
20248
20249
20263
20264
—
—
—
—
graphite ferrules
*For micropacked columns.
**For 0.28 mm MXT columns.
1-800-356-1688 or 1-814-353-1300
www.restek.com
35
Ferrules
Standard Ferrules for 1/16-, 1/8-, and 1/4-Inch Fittings
Available in Vespel®, graphite, or Vespel®/graphite.
Fitting Size
1/4"
1/16"
1/8"
1/8"
1/4"
1/4"
1/4"
Ferrule ID
3/16"
1/16"
1/8"
reduce to 1/16"
1/4"
reduce to 1/8"
reduce to 1/16"
qty.
5-pk.
10-pk.
10-pk.
10-pk.
10-pk.
10-pk.
10-pk.
Vespel
—
22210
22211
—
22212
22219
—
Graphite
—
20207
20208
20209
20210
20225
20226
—
—
—
—
Vespel/Graphite
20258
20218
20219
20220
20221
20222
20223
Two-Hole Ferrules for 1/8-Inch and 1/16-Inch Compression-Type Fittings
• Use 1/16-inch, two-hole ferrules with the 1/16-inch capillary inlet adaptor fitting kit
(cat.# 27185).
• Use 1/8-inch, two-hole ferrules with the 1/8-inch capillary inlet adaptor fitting kit
(cat.# 20645).
Fitting Size
1/16"
1/16"
1/8"
Ferrule ID
0.4 mm
0.5 mm
0.8 mm
Fits Column ID
0.25/0.28 mm
0.32 mm
0.45/0.53 mm
qty.
5-pk.
5-pk.
5-pk.
Vespel/Graphite
24848
24849
20246
Reducing Ferrules
Available in graphite or Vespel®/graphite.
Fitting Size
1/8"
1/8"
1/8"
1/4"
1/4"
1/4"
restek
innovation!
Alumaseal®
Ferrules
• Will not crack or fragment.
• Excellent for GC-MS.
Ferrule ID
0.4 mm
0.5 mm
0.8 mm
0.4 mm
0.5 mm
0.8 mm
Fits Column ID
0.25 mm
0.32 mm
0.53 mm
0.25 mm
0.32 mm
0.45/0.53 mm
qty.
5-pk.
5-pk.
5-pk.
5-pk.
5-pk.
5-pk.
Graphite
20205
20205
20206
20203
20203
20204
Vespel/Graphite
20254
20255
20215
—
—
20257
20217
Alumaseal® Ferrules
• Aluminum construction—will not crack or fragment.
• No retightening required after temperature cycles—excellent for GC-MS.
• Eliminate out-gassing and make leak-tight seals for less detector noise.
• Unique two-piece design permanently locks on fused silica tubing without causing
breakage.
• Will not stick in fittings, unlike Vespel® or graphite ferrules.
• Stable to 550 °C.
• Use with any 1/16" compression-type fitting.
Ferrule ID
0.4 mm
0.5 mm
0.8 mm
Fits Column ID
0.25 mm
0.32 mm
0.53 mm
qty.
10-pk.
10-pk.
10-pk.
cat.#
21472
21473
21474
qty.
10-pk.
10-pk.
10-pk.
10-pk.
10-pk.
10-pk.
10-pk.
cat.#
21122
21123
21124
21125
21126
21127
21128
PTFE Ferrules
• Upper temperature limit 250 °C.
• 100% PTFE; completely inert.
• One-piece design requires no back ferrule.
Fitting Size
1/16"
1/16"
1/16"
1/16"
1/8"
3/16"
1/4"
36
www.restek.com
Ferrule ID
1/16"
0.4 mm
0.5 mm
0.8 mm
1/8"
3/16"
1/4"
1-800-356-1688 or 1-814-353-1300
Connectors
Press-Tight® Connectors
• Deactivated Press-Tight® connectors maintain complete inertness for the GC
flow path.
• Siltek®-deactivated connectors are ideal for organochlorine pesticides analysis.
• Fit 0.33–0.74 mm OD columns (Restek 0.1–0.53 mm ID).
Universal Press-Tight® Connectors
• Connect a guard column to an analytical column.
• Repair a broken column.
• Connect a column outlet to a transfer line.
Description
Universal Press-Tight Connectors
Universal Press-Tight Connectors, Deactivated
Universal Press-Tight Connectors, Siltek Deactivated
20480
5-pk.
20400
20429
20480
25-pk.
20401
20430
20449
100-pk.
20402
20400
Universal “Y” Press-Tight® Connectors An alternative method of performing
dual-column confirmational analyses!
• Split sample flow onto two columns—perform confirmation analysis with a single
injection.
• Split a single column flow to two detectors.
Description
Universal “Y” Press-Tight Connector
Universal “Y” Press-Tight Connector, Deactivated
Universal “Y” Press-Tight Connector, Siltek Deactivated
ea.
20405
20405-261
20485
20485
3-pk.
20406
20406-261
20486
20405
Universal Angled “Y” Press-Tight® Connectors
• Perform confirmation analysis with a single injection.
• Inlet and outlet ends conform to the column curvature—alleviates column-end
connection strain.
Description
Universal Angled “Y” Press-Tight Connector
Universal Angled “Y” Press-Tight Connector, Deactivated
Universal Angled “Y” Press-Tight Connector, Siltek Deactivated
ea.
20403
20403-261
20487
3-pk.
20404
20404-261
20469
20487
20403
Polyimide Resin
Securely connects a Press-Tight® connector to a fused silica column.
Description
Polyimide Resin
Max. Temp.
350 °C
qty.
5 grams
cat.#
20445
20445
1-800-356-1688 or 1-814-353-1300
www.restek.com
37
Connectors
Vu2 Union® Connectors
Fit both Restek cage designs.
• Connect a guard column to an analytical
column.
• Connect a column to a transfer line.
• Connect two columns in series.
• Repair a broken column.
• Fit both Restek cage designs.
Restek’s Vu2 Union® connector combines the
simplicity of a Press-Tight® union with the
strength of a metal union.
A guard column connected to an analytical
column by a Vu2 Union® connector.
injector
detector
Vu2 Union®
connector
analytical
column
guard
column
How does a Vu2 Union® connector work?
A Press-Tight® union in the Vu2 Union® connector joins the fused silica ends together;
the ferrule and knurled nut at each end of the connector hold the tubing in place via
a secondary seal between the ferrule and the Press-Tight® union. Each knurled nut
applies independent pressure to each ferrule to make leak-tight seals with the column
ends. These ultra-strong connections will not unexpectedly disconnect under temperature changes, vibrations, or other stresses normally encountered in GC analyses.
The open design allows visual confirmation of the seal between the column and the
Press-Tight® union to ensure confidence in the connection. Hang the connector from
the column cage to minimize stress on the connections.
Secure, reliable
column-to-column
connections!
Who will benefit from using Vu2 Union® connectors?
Any analyst using guard columns, transfer lines, or restrictor tubing; performing a
dual-column analysis with columns connected in series; or seeking to repair a broken
column will find Vu2 Union® connectors the simple, reliable, easy-to-use solution to
their connection needs.
The Vu2 Union® connector's open
design allows visual confirmation
of the seal; secondary seals ensure
leak-tight connections.
NOTE: This product is not recommended for GC columnto-MS connections—use the Vacuum Vu-Union® union
for this type of connection.
knurled nut
fused silica
column, guard
column, or
transfer line
hanger
body
ferrule
Press-Tight® connector
Kits include: Vu2 Union® body, 2 knurled nuts, 2 Press-Tight® unions, and 4 ferrules
Description
Vu2 Union Connector Kit
Vu2 Union Connector Kit
Vu2 Union Connector Kit
Vu2 Union Connector Kit
Knurled nut
20480
20400
Ferrules Fit Column ID
0.10–0.15 mm
0.18–0.28 mm
0.32 mm
0.45–0.53 mm
qty.
kit
kit
kit
kit
2-pk.
cat.#
22220
21105
21106
21107
21108
25-pk.
20401
20430
20449
100-pk.
20402
Universal Press-Tight® Connectors
Description
Universal Press-Tight Connectors
Universal Press-Tight Connectors, Deactivated
Universal Press-Tight Connectors, Siltek Deactivated
5-pk.
20400
20429
20480
Graphite Ferrules for Vu2 Union® Connectors
• High-purity, high-density graphite.
• Stable to 450 °C.
• No binders that can off-gas or adsorb analytes.
• Smooth surface and clean edges.
Ferrule ID
0.3 mm
0.4 mm
0.5 mm
0.8 mm
38
www.restek.com
Fits Column ID
0.10–0.15 mm
0.18–0.28 mm
0.32 mm
0.45–0.53 mm
Graphite 2-pk.
22221
20280
20282
20284
Graphite 10-pk.
22222
20281
20283
20285
1-800-356-1688 or 1-814-353-1300
Connectors
SeCure® “Y” Connector Kits
• Connect two analytical columns to a transfer line or guard column.
• Use standard “Y” Press-Tight® connectors and 1/16" graphite ferrules.
• Reliable seal integrity—will not unexpectedly disconnect during temperatureprogrammed analyses.
• Open design allows visual confirmation of the seal for added confidence in the
connection.
• Fit both Restek cage designs.
Combine the simplicity of a “Y” Press-Tight® connector with the strength of a metal
union. The ferrules and knurled nuts hold the fused silica tubing in place, which prevents the tubing from unexpectedly disconnecting, even at temperatures as high as
400 °C.
The SeCure® “Y” connector's open design allows visual confirmation of the seal.
fused silica
column, guard
column, or
transfer line
knurled
nut
hanger
ferrule
body
Fit both Restek cage designs.
Dual-column confirmational analysis with
a single injection—one of the SeCure® “Y”
connector's many uses.
detectors
injector
analytical
columns
guard
column
Press-Tight®
connector
SeCure® “Y”
connector
Secure, reliable
column-to-column
connections!
Kits include: SeCure® “Y” connector body, 3 knurled nuts, “Y” Universal Press-Tight®
union, 3 ferrules.
Description
SeCure “Y” Connector Kit
SeCure “Y” Connector Kit
SeCure “Y” Connector Kit
Knurled nut
Ferrules Fit Column ID
0.18/0.25/0.28 mm
0.32 mm
0.45/0.53 mm
qty.
kit
kit
kit
3-pk.
cat.#
20276
20277
20278
20279
Universal “Y” Press-Tight® Connectors An alternative method of performing
dual-column confirmational analyses!
• Split sample flow onto two columns—perform confirmation analysis with a single
injection.
• Split a single column flow to two detectors.
• Deactivated Press-Tight® connectors maintain complete inertness for the GC flow
path.
• Siltek®-deactivated connectors are ideal for organochlorine pesticides analysis.
• Fit 0.33–0.74 mm OD columns (Restek 0.1–0.53 mm ID).
Description
Universal “Y” Press-Tight Connector
Universal “Y” Press-Tight Connector, Deactivated
Universal “Y” Press-Tight Connector, Siltek Deactivated
ea.
20405
20405-261
20485
3-pk.
20406
20406-261
20486
20485
20405
Graphite Ferrules for SeCure® “Y” Connectors
• Preconditioned to minimize out-gassing.
• High-purity, high-density graphite.
• Stable to 450 °C.
• No binders that can off-gas or adsorb analytes.
• Smooth surface and clean edges.
Ferrule ID
0.4 mm
0.5 mm
0.8 mm
Fits Column ID
0.10/0.15/0.18/0.25/0.28 mm
0.32 mm
0.45/0.53 mm
1-800-356-1688 or 1-814-353-1300
Graphite 10-pk.
20200
20201
20202
Graphite 50-pk.
20227
20228
20224
www.restek.com
39
Connectors
MXT®-Union Connector Kits
for Fused Silica Columns
• Low-dead-volume, leak-tight connection.
• Reusable.
• Siltek® treatment ensures maximum inertness.
• Ideal for connecting a guard column or transfer line to an
analytical column.
• Use to oven temperatures of 360 °C.
• Available in union and “Y” configurations.
• Can also be used for connecting fused silica to metal.
These MXT® connectors can be used with fused silica tubing
because of a Valcon polyimide, 1/32-inch, one-piece fused silica
adaptor. This unique graphite-reinforced composite allows a
capillary column to slide into the adaptor and be locked in place
simply by loosening and tightening the fitting.
20140
20141
20389
Valco® Connectors—One-Piece Valcon
Polyimide Adaptor Ferrule for Fused Silica
Fused silica adaptor ferrules are made from Valcon polyimide,
a unique graphite-reinforced composite specially prepared to
maximize mechanical stability at temperatures up to 350 °C.
The determining factor for selecting adaptor ferrule size is the
fused silica tubing OD.
1/32-Inch Valco® Adaptor Ferrules (Valcon Polyimide)
Tubing OD
0.25 ≤ 0.40 mm
0.40 ≤ 0.50 mm
0.50 ≤ 0.80 mm
Tubing ID
0.25 mm
0.32 mm
0.53 mm
1/32" Replacement Nut
Valco #
FS.4-5
FS.5-5
ZF.5V-5
qty.
5-pk.
5-pk.
5-pk.
5-pk.
cat.#
20137
20140
20141
20389
21386
MXT®-Union Connector Kits
for Fused Silica Columns
Each kit contains the MXT® union, two 1/32-inch nuts, and two
one-piece fused silica adaptors.
Description
For 0.25 mm ID Fused Silica Columns
For 0.32 mm ID Fused Silica Columns
For 0.53 mm ID Fused Silica Columns
qty.
kit
kit
kit
cat.#
21386
21385
21384
20146
Ferrule Removal Kit
MXT® “Y”-Union
Connector Kits
The tapered tools in this kit have teeth designed to grip and
remove fused silica adaptor ferrules that have become stuck in
the fitting detail. Each kit has two tools: one for removing 1/32inch adaptor ferrules and one for removing 1/16-inch adaptor
ferrules.
for Fused Silica Columns
Each kit contains the MXT®
union, three 1/32-inch nuts,
and three one-piece fused
silica adaptors.
Description
Ferrule Removal Kit
21389
Description
For 0.25 mm ID Fused Silica Columns
For 0.32 mm ID Fused Silica Columns
For 0.53 mm ID Fused Silica Columns
qty.
kit
kit
kit
40
www.restek.com
qty.
kit
cat.#
20146
cat.#
21389
21388
21387
20389
1/32-Inch Replacement Nut
Description
1/32" Replacement Nut
Valco #
FRK1
qty.
5-pk.
cat.#
20389
1-800-356-1688 or 1-814-353-1300
Vial Accessories
Electronic Rechargeable Crimpers and Decappers
NEW!
• Easy to use; comfortable grip.
• Hundreds of operations from one charge.
• Adjustable crimping force.
• New battery allows for faster charge cycle.
• All kits include a universal plug set for the battery charger.
• For 11 mm and 20 mm caps.
• One-year warranty.
22358
These redesigned electronic crimpers and decappers have a rechargeable 6.4-volt battery installed. The larger battery allows for quick, powerful operation and a faster
charge cycle, minimizing downtime. Charging the battery takes thirty minutes to two
hours. The universal plug set includes U.S., European, UK, and Australian plug clips.
Description
Electronic Crimper
Electronic Crimper
Electronic Decapper
Electronic Decapper
Replacement Battery for Electronic Crimpers and Decappers
Size
11 mm
20 mm
11 mm
20 mm
qty.
kit
kit
kit
kit
ea.
cat.#
22358
22359
22360
22361
22362
NEW!
Easy Grip Manual Crimpers and Decappers
Our new Easy Grip crimpers and decappers feature tough, light, glass-filled plastic
bodies with curved handles, that improve hand comfort during use. The bottom-pull
handle allows for a steadier hold than top-push handles. An easily viewed adjustment
knob is located at the head of the product. The clearly shown + and – symbols, along
with directional arrows, simplify adjusting the intensity of the crimp/decap needed.
The knob is also designed to indicate when the crimp setting has been reached, when
it fully contacts the body of the product.
Description
Crimper
Decapper
Crimper
Decapper
Universal plug set for
battery charger included
in all kits.
Size
11 mm
11 mm
20 mm
20 mm
qty.
ea.
ea.
ea.
ea.
cat.#
23396
23397
23398
23399
Crimper
Decapper
Safer than removing
caps with pliers, knives,
or screwdriver blades!
1-800-356-1688 or 1-814-353-1300
www.restek.com
41
Vials
2.0 mL Crimp-Top Vials, 12 x 32 mm, 11 mm
Choose with or without white graduated marking spots.
2.0 mL Crimp-Top Vials, 12 x 32 mm, 11 mm
Description
Vial w/White Graduated Marking Spot
Vial w/White Graduated Marking Spot
Vial without Graduated Marking Spot
24385
Color
Clear
Amber
Clear
Material
Glass
Glass
Glass
100-pk.
24383
24385
21152
1,000-pk.
24384
24386
21153
24383
2.0 mL, 11 mm Aluminum Crimp Seals with Septa
Seal Color
Silver
Blue
Green
Red
Yellow
Mixed
Silver
Blue
Green
Red
Yellow
Mixed
Silver
21724
Septa Material
PTFE/Natural Rubber
PTFE/Red Rubber
PTFE/Red Rubber
PTFE/Red Rubber
PTFE/Red Rubber
PTFE/Rubber
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone/PTFE
100-pk.
21174
24351
24353
24355
24357
—
24359
24361
24363
24365
24367
—
24369
500-pk.
—
—
—
—
—
21724
—
—
—
—
—
21725
—
1,000-pk.
21175
24352
24354
24356
24358
—
24360
24362
24364
24366
24368
—
24370
2.0 mL Crimp Vial Convenience Kits (Vials, Caps, & Septa)
Vials packaged in a clear-lid tray. Caps with septa packaged in a plastic bag.
Description
Clear 2.0 mL Vial, Deactivated, Silver Seal, PTFE/Natural Rubber Septa
Amber 2.0 mL Vial, Deactivated, Silver Seal, PTFE/Natural Rubber Septa
Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa
Amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa
Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa
Amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa
24671
100-pk.
24671
24673
21196
21198
24646
24648
1,000-pk.
24672
24674
21197
21199
24647
24649
Inserts for 2.0 mL, 11 mm Crimp-Top & 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials
21776
24692
24518A
Description
Big Mouth Insert w/Bottom Spring
Big Mouth Insert w/Bottom Spring
Big Mouth Insert w/Glass Flange (Step Design)*
Insert, Flat Bottom
Insert, Flat Bottom w/ID Ring
Big Mouth Insert w/Bottom Spring
Big Mouth Insert w/Bottom Spring & Graduated Markings
Big Mouth Insert, Top Flange
Big Mouth Insert, No Spring
Volume
50 µL
250 µL
250 µL
350 µL
350 µL
250 µL
250 µL
250 µL
250 µL
Material
Glass
Glass
Glass
Glass
Glass
Polypropylene
Polypropylene
Polypropylene
Polypropylene
100-pk.
24513
21776
24516
21780
24692
24518
24518A
24519
24520
1,000-pk.
21782
21777
21779
24517
24693
—
—
—
—
*Big Mouth insert w/glass flange (Step design) not to be used with 9 mm screw-thread vials.
2.0 mL Crimp-Top Vial with 100 µL Insert
• Plastic vial.
• Choice of glass or polypropylene insert.
Description
Clear Plastic Vial
Clear Plastic Vial
w/100 µL Polypropylene Insert
w/100 µL Glass Insert
100-pk.
24651
24653
1,000-pk.
24652
—
24651
42
www.restek.com
1-800-356-1688 or 1-814-353-1300
Vials
2.0 mL, 11 mm Poly Crimp Seal Caps: Snap-on or Crimp
• Works on any crimp style vial.
• Crimps smoothly and easily—no more sharp edges from an aluminum crimp cap.
• Easily decaps using standard decapping tools.
• Eliminates inconsistent sealing that results from improper crimping.
• Unique design holds the septum firmly in place.
• Provides better seal than snap caps.*
• Meets CONEG standards. The Poly Crimp seal is free of heavy metals and is easily
disposed of or incinerated.
The patented Poly Crimp seal is versatile, working as either a snap-on or crimp-top
cap. Simply use a standard crimping tool to secure the Poly Crimp seal onto any crimptop vial. It’s that easy!
Seal Color
Clear
Clear
Blue
Clear
Blue
Mixed
Liner Material
PTFE/Butyl Rubber
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone/PTFE
PTFE/Silicone/PTFE
PTFE/Silicone/PTFE
100-pk.
24433
24443
24445
24453
24455
—
400-pk.
—
—
—
—
—
21728
1,000-pk.
24434
24444
24446
24454
24456
—
*Based on continual use for 3–4 days.
2.0 mL, 11 mm GC Snap Ring Cap with Septum
• Snaps on any crimp-style vial.
• Clear polypropylene cap provides a tighter seal than standard Snap Ring cap.
• Good for pressurized injection systems.
• Save money! Use this snap cap when you don’t need to crimp.
Description
Polypropylene Snap Ring Cap w/Liner
Polypropylene Snap Ring Cap w/Septum
Polypropylene Snap Ring Cap w/Septum
Liner/Septa Material
PTFE, 10 mil
PTFE/Butyl Rubber
PTFE/Silicone
100-pk.
21729
21731
21733
1,000-pk.
21730
21732
21734
21731
Certified Autosampler Vial Kits
Certified Vials, 2.0 mL Screw-Thread Vials
• Certificates enclosed with each kit.
• Vials of clear or amber borosilicate
glass with ID marking spots.
• Closures with pre-inserted septa.
• Each kit sealed for integrity.
Certification Parameters Include:
Vial Dimensions: height, diameter, bottom thickness, neck
length, thread profile, and annealing
Cap/Septum:
diameter, height, thread integrity, center flash,
septa insertion, sealing/resealing test, residue
by headspace GC, and extractables
Chemical Test: HPLC Test: nonvolatile residue
GC Test:
volatile residue
Description
Assembled Clear 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Slit Septa
Assembled Amber 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Slit Septa
Unassembled Clear 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Septa
Unassembled Amber 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Septa
Unassembled Clear 2.0 mL High Recovery Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Slit Septa
Unassembled Amber 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Slit Septa
100-pk.
22789
22788
22792
22790
22793
22791
22788
22792
1-800-356-1688 or 1-814-353-1300
www.restek.com
43
Vials
Agilent Compatible!
2.0 mL, 9 mm Short-Cap, Screw-Thread Vials, 12 x 32 mm
• Fit all 2.0 mL, 12 x 32 mm, crimp-top vial-based autosamplers.
2.0 mL, 9 mm Short-Cap, Screw-Thread Vials (vial only)
Description
Short-Cap Vial w/White Graduated Marking Spot
Short-Cap Vial w/White Graduated Marking Spot
Short-Cap Vial without Graduated Marking Spot
Color
Clear
Amber
Clear
100-pk.
21140
21142
21154
1,000-pk.
21141
21143
21155
2.0 mL, 9 mm Short-Cap, Screw-Vial Closures (Polypropylene, preassembled)
21140
Ideal for Agilent 7673, 7683, 7693 &
other autosamplers that process
12 × 32 mm crimp-top vials.
24668
Cap Color
Blue
Mixed
Blue
Green
Yellow
Mixed
Blue
Black
Natural
Red
Yellow
Mixed
Liner Material
PTFE/Red Rubber
PTFE/Red Rubber
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone/PTFE
PTFE/Silicone/PTFE
PTFE/Silicone/PTFE
PTFE/Silicone/PTFE
PTFE/Silicone/PTFE
PTFE/Silicone/PTFE
100-pk.
24473
—
24485
24487
24493
—
24497
24495
24501
24503
24505
—
500-pk.
—
24668
—
—
—
24669
—
—
—
—
—
24670
1,000-pk.
24474
—
24486
24488
24494
—
24498
24496
24502
24504
24506
—
Interlock Vials
Interlock limited volume vials offer the performance and convenience of a one piece
microvial for a fraction of the cost. A 300 µL insert is fused into a 12 x 32 mm clear or
amber glass vial. This one piece design reduces the potential for contamination.
22433
22435
also available
Description
Interlock Vial
Interlock Vial
Interlock Vial
Interlock Vial
Type
9 mm Thread
9 mm Thread
11 mm Crimp or Snap Ring
11 mm Crimp or Snap Ring
Volume
300 µL
300 µL
300 µL
300 µL
Color
Clear
Amber
Clear
Amber
Material
Glass
Glass
Glass
Glass
100-pk.
22433
22435
22437
22439
500-pk.
22434
22436
22438
22440
See page 42 for crimp seals.
2.0 mL Sample Vial Racks
• Racks feature alphanumeric indexing for easier vial identification.
• Racks can be stacked for efficient storage.
• Fits most 2.0 mL, 12 x 32 mm vials (vials sold separately).
22856
44
www.restek.com
Description
Polypropylene Storage Rack
for 12 x 32 mm Vials
Capacity
qty.
cat.#
qty.
cat.#
50 vials, 5 x 10
ea.
22856
5-pk.
22857
1-800-356-1688 or 1-814-353-1300
Vials
Headspace Screw-Thread Vials (18 mm)
Description
Headspace Vial
Headspace Vial
Headspace Vial
Headspace Vial
Volume
10 mL
10 mL
20 mL
20 mL
Color
Clear
Amber
Clear
Amber
Dimensions
22 x 45 mm
22 x 45 mm
22 x 75 mm
22 x 75 mm
100-pk.
23084
23088
23082
23086
1,000-pk.
23085
23089
23083
23087
Caps not included.
23082
23084
23086
23088
Magnetic Screw-Thread Caps (18 mm)
Description
Magnetic Caps and Septa
Magnetic Caps and Septa
Magnetic Caps and Septa
Septa Material
PTFE/Silicone
PTFE/Silicone for SPME
PTFE/Red Chlorobutyl
100-pk.
23090
23092
23094
1,000-pk.
23091
23093
23095
100-pk.
21166
24683
21164
24685
21162
21160
1,000-pk.
21167
24684
21165
24686
21163
21161
23094
23090
Headspace Crimp Vials (20 mm)
Description
Headspace Vial
Headspace Vial, Flat Bottom
Headspace Vial, Rounded Bottom
Headspace Vial, Flat Bottom
Headspace Vial, Rounded Bottom
Headspace Vial
Volume
6 mL
10 mL
10 mL
20 mL
20 mL
27 mL
Color
Clear
Clear
Clear
Clear
Clear
Clear
Dimensions
22 x 38 mm
23 x 48 mm
23 x 48 mm
23 x 75 mm
23 x 75 mm
30 x 60 mm
24685
24683
21166
Aluminum Seals w/Septa (20 mm, preassembled)
Description
Seals w/Septa
Seals w/Septa
Pressure Release Seals w/Septa
Pressure Release Seals w/Septa
Seal Color
Silver
Silver
Silver
Silver
Septa Material
PTFE/Gray Butyl Rubber
PTFE/Silicone
PTFE/Gray Butyl Rubber
PTFE/Silicone
100-pk.
21761
21763
21765
21767
1,000-pk.
21762
21764
21766
21768
21761
Magnetic Seals w/Septa (20 mm, preassembled)
Description
Magnetic Seals w/Septa, with 5 mm Hole
Magnetic Seals w/Septa, with 8 mm Hole
Magnetic Seals w/Septa, with 8 mm Hole
BiMetal Magnetic Seals w/Septa, with
8 mm Hole
BiMetal Magnetic Seals w/Septa, with
8 mm Hole
Seal Color
Gold
Gold
Gold
Septa Material
PTFE/Silicone
PTFE/Silicone
PTFE/Butyl
100-pk.
22833
22831
22835
1,000-pk.
22834
22832
22836
Red/Silver
PTFE/Silicone
22441
22442
Blue/Silver
PTFE/Silicone
22443
22444
22835
NEW!
5 mm hole is compatible with the following systems: Carlo Erba HS500/HS800, CTC 500, Fisons HS500/HS800
and Varian/Chrompack 9020/25. 8 mm hole is compatible with the Combi Pal.
1-800-356-1688 or 1-814-353-1300
www.restek.com
45
Syringes
Standard Microliter Syringes for Agilent 7673, 7683, 7693A, and 6850
Autosamplers
• Hamilton and SGE syringes are designed and tested to meet critical autosampler
performance needs.
• Needle point styles are designed to withstand multiple, rapid injections through a
septum.
Hamilton
Volume
0.5 µL
0.5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
Needle
Term.
ASRN
ASRN
ASRN
ASN
ASN
ASN
ASN
ASRN
ASN
ASN
ASRN
ASN
ASN
ASRN
ASN
ASN
ASRN
ASN
ASN
Needle
Gauge
23s
26s
23s
23s
23s
26s
26s
23s–26s
23s–26s
23s–26s
23s
23s
23s
26s
26s
26s
23s–26s
23s–26s
23s–26s
Needle
Length
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
1.71"
Point
Style
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Agilent
Needle
Term.
R
R
R
F
F
F
F
R
F
F
R
F
F
R
F
F
R
F
F
Needle
Gauge
23
26
23
23
23
26
26
23–26s
23–26s
23-26s
23
23
23
26
26
26
23–26s
23–26s
23–26s
Needle
Length
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
Point
Style
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
Cone
R
R
R
R
23
23
23
23
42 mm
42 mm
42 mm
42 mm
Cone
Cone
Cone
Cone
Hamilton
cat.#
86276
86274
87957
87987
87990
87988
87989
87959
87993
87994
80357
80387
80390
80358
80388
80389
80359
80393
80391
qty.
ea.
ea.
ea.
ea.
6-pk.
ea.
6-pk.
ea.
ea.
6-pk.
ea.
ea.
6-pk.
ea.
ea.
6-pk.
ea.
ea.
6-pk.
Restek
cat.#
24895
21221
20172
20168
20170
24592
21230
21223
24593
24594
20171
20167
20169
24597
24595
24599
24598
24596
24600
SGE
Model
0.5BR-HP-0.63
0.5BR-HP-0.47
5R-HP-0.63
5F-HP-0.63
SK-5F-HP-0.63
5F-HP-0.47
SK-5F-HP-0.47
5R-HP-0.63/0.47
5F-HP-0.63/0.47
SK-5F-HP-0.63/0.47
10R-HP-0.63
10F-HP-0.63
SK-10F-HP-0.63
10R-HP-0.47
10F-HP-0.47
SK-10F-HP-0.47
10R-HP-0.63/0.47
10F-HP-0.63/0.47
SK-10F-HP-0.63/0.47
cat.#
000410
000400
001815
001810
001814
001800
001804
001825
001821
001822
002815
002810
002814
002805
002800
002804
002825
002821
002822
qty.
ea.
ea.
ea.
ea.
6-pk.
ea.
6-pk.
ea.
ea.
6-pk.
ea.
ea.
6-pk.
ea.
ea.
6-pk.
ea.
ea.
6-pk.
Restek
cat.#
24791
24790
24793
24781
24783
24780
24782
21211
21210
21214
24795
24785
24787
24794
24784
24786
21213
21212
21215
25R-HP-0.63
50R-HP-0.63
100R-HP-0.63
250R-HP-0.63
003665
004665
005665
006665
ea.
ea.
ea.
ea.
24798
24799
24800
24801
Model
7000.5
7000.5
75
75
75
75
75
75
75
75
701
701
701
701
701
701
701
701
701
SGE
Volume
20167
24793
Guide to Needle Termination Codes
Hamilton:
(ASN) Autosampler Cemented Needle
(ASRN) Autosampler Removable Needle
SGE:
(F) Fixed Needle
(R) Removable Needle
46
www.restek.com
0.5 µL
0.5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
5 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
10 µL
Large Volume
25 µL
50 µL
100 µL
250 µL
1-800-356-1688 or 1-814-353-1300
Syringes
Gas-Tight PTFE-Tipped Syringes for Agilent 7673, 7683, 7693A, and 6850
Autosamplers
Hamilton
Volume
10 µL
10 µL
10 µL
10 µL
Needle Needle Needle Point
Term. Gauge Length Style
ASN
23s
1.71" Agilent
ASRN
23s
1.71" Agilent
ASRN
26s
1.71" Agilent
ASRN 23s–26s 1.71" Agilent
Hamilton
Model
1701
1701
1701
1701
cat.#
80080
80087
80088
80089
qty.
ea.
ea.
ea.
ea.
Restek
cat.#
24894
21224
21228
21229
SGE
Model
10F-HP-GT-0.63
10R-HP-GT-0.63
10R-HP-GT-0.63/0.47
cat.#
002812
002818
002829
qty.
ea.
ea.
ea.
Restek
cat.#
24789
24797
21220
SGE
Volume
10 µL
10 µL
10 µL
Needle Needle Needle
Term. Gauge Length
F
23
42 mm
R
23
42 mm
R
23–26 42 mm
Point
Style
Cone
Cone
Cone
24894
Replacement Needles for Agilent 7673, 7683, 7693A, and 6850
Autosampler Syringes
Hamilton
Syringe
Volume
5–10 µL
5–10 µL
5–10 µL
Needle
Gauge
23s
26s
23s–26s
Needle
Length
1.71"
1.71"
1.71"
Point
Style
Agilent
Agilent
Agilent
Hamilton
cat.#
7786-01
7786-02
7785-01
qty.
6-pk.
6-pk.
6-pk.
Restek
Needle
Gauge
23
26
23
23
26
23
Needle
Length
42 mm
42 mm
42 mm
42 mm
42 mm
42 mm
Point
Style
Cone
Cone
Cone
Cone
Cone
Cone
SGE
cat.#
033715
033708
036720
037717
037715
038717
qty.
ea.
ea.
2-pk.
2-pk.
2-pk.
2-pk.
cat.#
20164
20165
20166
SGE
Syringe
Volume
0.5 µL
0.5 µL
5 µL
10 µL
10 µL
25–250 µL
Restek
cat.#
24821
24820
24823
24825
24824
24826
Do not reuse TFE washers.
1-800-356-1688 or 1-814-353-1300
www.restek.com
47
Fittings
Swagelok® Fittings (Brass & Stainless Steel)
Restek is pleased to offer one of the premier lines of fittings available for chromatographers in the market today. We can supply the entire line of Swagelok® fittings. If you
don't see the exact product you're looking for, please call us or contact your Restek
representative for a quote.
Brass
Fitting Type
Nut
nut
front ferrule
Front Ferrule
Back Ferrule
Nut & Ferrule Set
back ferrule
Plug
nut & ferrule set
Union
plug
union
Reducing Union
Tee
Cross
reducing union
tee
Tube End Reducer
Port Connector
tube end reducer
Male Connector
cross
port connector
Female Connector
male connector
Male & Female
Quick Couplings
male quick coupling
female connector
Size
1/16"
1/8"
1/4"
1/16"
1/8"
1/4"
1/16"
1/8"
1/4"
1/16"
1/8"
1/4"
1/16"
1/8"
1/4"
1/16"
1/8"
1/4"
1/8" to 1/16"
1/4" to 1/16"
1/4" to 1/8"
1/16"
1/8"
1/4"
1/8"
1/4"
1/8" to 1/16"
1/4" to 1/16"
1/8" to 1/4"
1/4" to 1/8"
1/8"
1/4"
1/8" to 1/4"
1/8" to 1/8" NPT
1/4" to 1/4" NPT
1/16" to 1/8" NPT
1/8" to 1/4" NPT
1/4" to 1/8" NPT
1/8" to 1/8" NPT
1/4" to 1/4" NPT
1/4" to 1/8" NPT
1/8" male*
1/8" male
1/8" female*
1/4" male*
1/4" male
1/4" female*
Swagelok #
102-1
202-1
402-1
103-1
203-1
403-1
104-1
204-1
404-1
100-P
200-P
400-P
100-6
200-6
400-6
200-6-1
400-6-1
400-6-2
100-3
200-3
400-3
200-4
400-4
100-R-2
100-R-4
400-R-2
200-R-4
201-PC
401-PC
401-PC-2
200-1-2
400-1-4
100-1-2
200-1-4
400-1-2
200-7-2
400-7-4
400-7-2
QC4D-200
QC4S-200
QC4B-200
QC4D-400
QC4S-400
QC4B-400
qty.
20-pk.
40-pk.
40-pk.
20-pk.
40-pk.
40-pk.
20-pk.
40-pk.
40-pk.
10-pk.
20-pk.
20-pk.
5-pk.
10-pk.
10-pk.
3-pk.
5-pk.
5-pk.
5-pk.
5-pk.
5-pk.
2-pk.
2-pk.
2-pk.
2-pk.
2-pk.
5-pk.
5-pk.
5-pk.
5-pk.
5-pk.
10-pk.
5-pk.
10-pk.
10-pk.
5-pk.
10-pk.
10-pk.
5-pk.
5-pk.
5-pk.
—
—
—
—
—
—
cat.#
23100
23101
23102
23103
23104
23105
23106
23107
23108
23109
23110
23111
23112
23113
23114
23115
23116
23117
23118
23119
23120
23121
23122
23123
23124
23125
23126
23127
23128
23129
23130
23131
23132
23133
23134
23135
23136
23137
23138
23139
23140
—
—
—
—
—
—
316 Grade Stainless Steel
qty.
cat.#
5-pk.
23150
10-pk.
23151
10-pk.
23152
10-pk.
23153
20-pk.
23154
20-pk.
23155
10-pk.
23156
20-pk.
23157
20-pk.
23158
2-pk.
23159
5-pk.
23160
5-pk.
23161
2-pk.
23162
4-pk.
23163
4-pk.
23164
ea.
23165
2-pk.
23166
2-pk.
23167
ea.
23168
2-pk.
23169
2-pk.
23170
ea.
23171
ea.
23172
ea.
23173
ea.
23174
ea.
23175
2-pk.
23176
2-pk.
23177
2-pk.
23178
2-pk.
23179
2-pk.
23180
2-pk.
23181
2-pk.
23182
2-pk.
23183
2-pk.
23184
2-pk.
23185
2-pk.
23186
2-pk.
23187
2-pk.
23188
2-pk.
23189
2-pk.
23190
ea.
23191
23192
ea.
23193
ea.
23194
ea.
23195
ea.
23196
ea.
*Includes self-sealing shut-off valve.
female quick coupling
48
www.restek.com
1-800-356-1688 or 1-814-353-1300
Fittings
Swagelok® Fittings (Siltek®/Sulfinert® & Silcosteel®-CR Treated)
• Full line of treated 1/16", 1/8", and 1/4" fittings.
• Silcosteel®-CR treatment enhances corrosion resistance by 10x or more.
• For custom treatment on any Swagelok® fitting or other system parts not listed here,
call us or contact your Restek representative.
Fitting Type
Union
Tee
Reducing Union
Elbow
Plug
Cross
Tube End Reducer
Port Connector
Male Connector
Female Connector
Bulkhead Union
Size
1/16"
1/8"
1/4"
3/8"
1/16"
1/8"
1/4"
3/8"
1/8" to 1/16"
1/4" to 1/16"
1/4" to 1/8"
3/8" to 1/4"
1/8"
1/4"
1/8"
1/4"
1/8"
1/4"
1/8" tube to 1/16"
1/4" tube to 1/16"
1/8" tube to 1/4"
1/4" tube to 1/8"
1/8"
1/4"
1/8" tube to 1/4"
1/8" to 1/8" NPT
1/4" to 1/4" NPT
1/16" to 1/8" NPT
1/8" to 1/4" NPT
1/4" to 1/8" NPT
3/8" to 3/8" NPT
1/8" to 1/8" NPT
1/4" to 1/4" NPT
1/4" to 1/8" NPT
1/8" to 1/4" NPT
1/8"
1/4"
Swagelok #
SS-100-6
SS-200-6
SS-400-6
SS-600-6
SS-100-3
SS-200-3
SS-400-3
SS-600-3
SS-200-6-1
SS-400-6-1
SS-400-6-2
SS-600-6-4
SS-200-9
SS-400-9
SS-200-P
SS-400-P
SS-200-4
SS-400-4
SS-100-R-2
SS-100-R-4
SS-400-R-2
SS-200-R-4
SS-201-PC
SS-401-PC
SS-401-PC-2
SS-200-1-2
SS-400-1-4
SS-100-1-2
SS-200-1-4
SS-400-1-2
SS-600-1-6
SS-200-7-2
SS-400-7-4
SS-400-7-2
SS-200-7-4
SS-200-61
SS-400-61
Siltek/Sulfinert Treated
qty.
cat.#
ea.
22540
ea.
22541
ea.
22542
ea.
22909
ea.
22543
ea.
22544
ea.
22545
ea.
22910
ea.
22546
ea.
22547
ea.
22548
ea.
22911
ea.
22549
ea.
22550
ea.
22573
ea.
22574
ea.
22551
ea.
22552
ea.
22553
ea.
22554
ea.
22555
ea.
22556
ea.
22557
ea.
22558
ea.
22559
ea.
22561
ea.
22562
ea.
22563
ea.
22564
ea.
22565
ea.
22912
ea.
22566
ea.
22567
ea.
22568
ea.
22569
ea.
22570
ea.
22571
Silcosteel-CR Treated
qty.
cat.#
ea.
22575
ea.
22576
ea.
22577
ea.
22904
ea.
22578
ea.
22579
ea.
22580
ea.
22905
ea.
22581
ea.
22582
ea.
22583
ea.
22906
ea.
22584
ea.
22585
ea.
22620
ea.
22597
ea.
22586
ea.
22587
ea.
22588
ea.
22589
ea.
22590
ea.
22591
ea.
22592
ea.
22593
ea.
22594
ea.
22595
ea.
22596
ea.
22610
ea.
22611
ea.
22612
ea.
22907
ea.
22613
ea.
22614
ea.
22615
ea.
22616
ea.
22617
ea.
22618
union
tee
reducing union
elbow
plug
cross
tube end reducer
male connector
port connector
female connector
bulkhead union
Custom Coatings
• Siltek®—The ultimate passivation of treated surfaces, from glass to high
nickel alloys of steel; ideal for sulfurs, automotive exhaust testing, or stack
gas sampling.
• Sulfinert®—A required treatment for metal components when analyzing
for parts-per-billion levels of organosulfur compounds.
• Silcosteel®-CR—A corrosion resistant layer that increases the lifetime of
system components in acidic environments containing hydrochloric acid,
nitric acid, or seawater.
1-800-356-1688 or 1-814-353-1300
www.restek.com
49
Fitting Kits
Swagelok® Fitting Kits
Save more than 40% by purchasing a Restek Swagelok® fittings kit compared to paying full price for the individual parts!
• Includes the most common assortment of 1/8” and 1/4” brass or stainless steel fittings. • Parts list makes reordering easy.
• Parts come in sturdy toolbox for easy and convenient storage.
40%
savings
Swagelok® Fitting Kit (Brass)
Swagelok® Fitting Kit (Stainless Steel)
Swagelok #,Description, qty included in kit
1/8" brass nut (20)
B-202-1
1/4" brass nut (20)
B-402-1
1/8" brass front ferrule (20)
B-203-1
1/4" brass front ferrule (20)
B-403-1
1/8" brass back ferrule (20)
B-204-1
B-404-1 1/4" brass back ferrule (20)
B-200-C 1/8" brass cap (6)
B-400-C 1/4" brass cap (6)
B-200-P 1/8" brass plug (6)
B-400-P 1/4" brass plug (6)
B-200-6 1/8" brass union (2)
B-400-6 1/4" brass union (2)
B-400-6-2 1/4" to 1/8" brass reducing union (2)
B-200-3 1/8" brass tee (2)
B-400-3 1/4" brass tee (2)
B-400-R-2 1/8" to 1/4" brass tube end reducer (2)
B-200-R-4 1/4" to 1/8" brass tube end reducer (2)
MS-IG-200 1/8" inspection gauge (1)
MS-IG-400 1/4" inspection gauge (1)
Swagelok #,Description, qty included in kit
SS-202-1 1/8" SS nut (20)
SS-402-1 1/4" SS nut (20)
SS-203-1 1/8" SS front ferrule (20)
SS-403-1 1/4" SS front ferrule (20)
SS-204-1 1/8" SS back ferrule (20)
SS-404-1 1/4" SS back ferrule (20)
SS-200-C 1/8" SS cap (6)
SS-400-C 1/4" SS cap (6)
SS-200-P 1/8" SS plug (6)
SS-400-P 1/4" SS plug (6)
SS-200-6 1/8" SS union (2)
SS-400-6 1/4" SS union (2)
SS-400-6-2 1/4" to 1/8" SS reducing union (2)
SS-200-3 1/8" SS tee (2)
SS-400-3 1/4" SS tee (2)
SS-400-R-2 1/8" to 1/4" SS tube end reducer (2)
SS-200-R-4 1/4" to 1/8" SS tube end reducer (2)
MS-IG-200 1/8" inspection gauge (1)
MS-IG-400 1/4" inspection gauge (1)
Description
Swagelok Fitting Kit, Brass
50
www.restek.com
qty.
kit
cat.#
23141
Description
Swagelok Fitting Kit, Stainless Steel
qty.
kit
cat.#
23197
1-800-356-1688 or 1-814-353-1300
Super-Clean Gas Filters
Restek Super-Clean Gas Filters
• High-purity output ensures 99.9999% pure gas (at max. flow of 2 L/min).
• “Quick connect” fittings for easy, leak-tight cartridge changes.
• Glass inside to prevent diffusion; polycarbonate housing outside for safety.
• All traps measure 10 5/8" x 1 3/4" (27 x 4.4 cm).
• Each base plate unit measures 4" x 4" x 1 7/8" (10.2 x 10.2 x 4.8 cm).
Table I Each Super-Clean gas filter provides high-purity outlet gas.
Type of Filter
Moisture
cat.# 22028
Oxygen
cat.# 22029
Maximum
Pressure/
Maximum
Flow Rates
Use for:
>99.9999
11 bar
159 psi/
7 L/min.
Inert carrier gas
Air
Hydrogen
Yellow/orange to
clear
7.2
—
—
>2
>99.9999
11 bar
159 psi/
7 L/min.
Inert carrier gas
Green to grey
NA
1,000
—
>2
Outlet
Gas Quality (%)
Indicator
Color Change
H20 (g)
Estimated
Capacity
Lifetime
O2 (mL) Hydrocarbons (g) (years)
22022
did you
know?
Hydrocarbons
cat.# 22030
>99.9999
11 bar
159 psi/
7 L/min.
Inert carrier gas
Air
Hydrogen
No indicator
NA
—
123
>2
Fuel Gas1
cat.# 22022
>99.9999
11 bar
159 psi/
7 L/min.
Inert carrier gas
Air
Hydrogen
Yellow/orange to
clear
3.5
—
243
>1.5
Triple2
cat.# 22020
>99.9999
11 bar
159 psi/
7 L/min.
Inert carrier gas
Yellow/orange to
clear
Green to grey
1.8
500
43
>1
Helium Specific2
cat.# 21982
>99.9999
11 bar
159 psi/
7 L/min.
Helium
Yellow/orange to
clear
Green to grey
1.8
500
—
>1
All Restek SuperClean gas filter cartridges (except
hydrocarbon filter cat.# 22030) feature easy-to-read
indicators. The indicator code is
shown on every trap so there is no
confusion about
when to replace it.
Removes hydrocarbons and moisture.
Removes hydrocarbons, moisture, and oxygen.
3
As n-butane.
1
2
22020
21982
22025
Restek Super-Clean Gas Filter Kits and Replacements
Description
Carrier Gas Cleaning Kit
Includes: mounting base plate, 1/8" inlet/outlet fittings, and oxygen/moisture/hydrocarbon Triple Gas Filter
Fuel Gas Purification Kit
Includes: mounting base plate, 1/8" inlet/outlet fittings, and hydrocarbon/moisture Fuel Gas Filter
Ultra-High Capacity Hydrocarbon Filter
Ultra-High Capacity Moisture Filter
Ultra-High Capacity Oxygen Filter
Replacement Triple Gas Filter (removes oxygen, moisture, and hydrocarbons)
Replacement Fuel Gas Filter (removes moisture and hydrocarbons)
Helium-Specific Carrier Gas Cleaning Kit
Includes: mounting base plate, 1/8" inlet/outlet fittings, and oxygen/moisture/hydrocarbon Helium-Specific Filter
Replacement Helium-Specific Gas Filter (removes oxygen, moisture, and hydrocarbons)
Gas Filter Bundle Kit
Includes: one Triple Gas Filter (cat.# 22020) and two Fuel Gas Filters (cat.# 22022)
qty.
cat.#
kit
22019
kit
22021
ea.
ea.
ea.
ea.
ea.
22030
22028
22029
22020
22022
kit
21983
ea.
21982
kit
22031
tech tip
Oxygen and Moisture Traps
Restek highly recommends oxygen and moisture traps for make-up gas when operating sensitive detectors such as
electron capture detectors (ECD). The hydrogen reaction gas for sensitive electrolytic conductivity detectors (ELCD) also
requires a hydrocarbon trap to remove trace impurities.
1-800-356-1688 or 1-814-353-1300
www.restek.com
51
Part Number Cross-Reference
Similar to Agilent Part #
05890-60800
05890-61030
05890-61080
05890-61140
05890-61260
05890-61525
05921-21170
05921-21170
05971-20305
05988-20066
07673-21140
07673-60605
07673-60810
07673-61275
1500-0676
1500-0803
18710-20119
18710-20119
18740-20800
18740-20880
18740-20880
18740-20885
18740-20885
18740-20940
18740-60835
18740-60835
18740-80190
18740-80200
18740-80200
18740-80220
18789-80070
18789-80070
19231-00130
19231-20910
19231-20920
19231-20930
19231-20940
19231-20950
19231-20960
19231-20970
19231-60620
19231-60660
19231-60680
19231-60690
19231-80580
19233-20625
19243-80570
19244-80540
19244-80560
19244-80560
19244-80610
19246-60630
19247-60510
19251-00100
19251-20620
19251-60540
19251-60540
19251-60540
19251-60575
19251-60575
19251-80525
19251-80570
19251-80570
19301-60660
210-3003
210-3003
210-3003
210-3003-05
52
Page
31
20
31
28
20
32
17
33
26
26
32
32
32
32
32
32
30
30
17
15
15
15
15
20
19
19
6
6
2
5
30
30
28
29
28
28
29
29
29
29
28
28
29
29
28
31
24
24
30
30
31
20
21
19
20
6
5
2
18
18
20
18
18
29
24
2
2
2
Restek Part #
20652
23040
20657
22068
21610
22343
20883
21879
24699
20643
21237
22855
22337
22695
22692
22363
21694, 21695
21696, 21697
22078
20390
21315
21305
21317
20409
20631
21309
20709
20972
23333.1
20914
21686, 21687
21688, 21689
22329
21137
23037
23036
21136
21138
21138
21138
22069
23035
21001
23010
23041
27192
21691
21303
20670, 20671
20672, 20673
22077
20634
22076
22065
22080
20781
22400
23300.1
20265
20267
22800
20266
20268
21000
20772
23301.1
23301.25
23301.5
www.restek.com
Product Name
Replacement Cable, 5890 to Strip Chart/Integrator
Oven Temperature Sensor
Replacement Remote Start Cable
Injector/FID Heater and Injector/FID PRT Sensor
Replacement Chemical Trap
Parking Post
Capillary Column Nut, SS
Capillary Column Nut, Brass
Gold Tip Transfer Line
(Detector) MSD Source Nut
Injector Mounting Post
Turret Tray Assembly
Injector Turret Motor
Autosampler Plunger Carrier Belt
Carriage Motor Belt
Z-Belt
FID Jet, Standard, 0.018-Inch ID Tip
FID Jet, High-Performance, 0.018-Inch ID Tip
Reducing Nut
Replacement Inlet Seal, 1.2 mm SS
Replacement Inlet Seal, 0.8 mm SS
Replacement Inlet Seal, 1.2 mm Gold Plated
Replacement Inlet Seal, 0.8 mm Gold Plated
Heat Sink
Septum Nut, AS & PTV
Septum Nut, Manual Injection
4 mm Cup Splitter Liner
1 mm Split Liner
Restek Premium Liner, 1 mm Split
2 mm Splitless Liner
FID Jet, High-Performance, 0.030-Inch ID Tip
FID Jet, Standard, 0.030-Inch ID Tip
Spanner Wrench
FID Ignitor Castle
FID Collector Housing Kit
FID Collector Mount
FID Collector Nut and Washer
FID Collector (includes insulators)
FID Collector (includes insulators)
FID Collector (includes insulators)
Injector/FID Heater
Injector/FID PRT Sensor
FID Ignitor
FID Collector Assembly Kit (includes insulators)
FID Base Weldment
Replacement ECD Fused Silica Liner
Siltek Septum Packed Purge Port Weldment
DI Liner Adaptor for Packed Column GC
FID Jet, Standard, 0.011-Inch ID Tip
FID Jet, High-Performance, 0.011-Inch ID Tip
FID/NPD Capillary Adaptor Fitting Backpressure
Regulator Kit
Air Diverter
Injector Wrench
Heater Block Retaining Nut
4 mm Split Liner w/Deact. Wool
4 mm Splitless Liner w/Deact. Wool
4 mm Straight Restek Premium Liner w/Wool
Replacement Weldment
Replacement Weldment, Siltek
Split Vent Line (32-inch)
Replacement Shell Weldment Replacement Shell
Weldment, Siltek
FID Flow Measuring Adaptor
4 mm Splitless Liner
Restek Premium Liner, 4 mm Straight
Restek Premium Liner, 4 mm Straight
Restek Premium Liner, 4 mm Straight
Similar to Agilent Part # Page Restek Part #
210-3003-5
5
20773
210-4004-5
6
21023
210-4004-5
2
23305.5
210-4022-5
6
22984
500-1210
37
20445
500-2114
35
20250
5020-8292
33
21040
5020-8292
33
5020-8293
33
5020-8293
33
5020-8294
5061-5869
5062-3506
5062-3508
5062-3538
5062-3580
5062-3581
5062-3587
5062-3587
5080-8732
31
15
35
35
35
36
36
5
2
24
5080-8732
5080-8773
5080-8898
5180-4165
5180-4168
5180-4173
5180-4181
5181-1210
5181-1267
5181-1270
5181-1273
5181-3311
5181-3315
5181-3315
5181-3316
5181-3316
5181-3319
5181-3321
5181-3360
5181-3376
5181-3377
5181-3382
24
35
24
28
12
12
20
42
46
42
46
29
5
2
5
2
47
46
46
42
42
24
5181-3382
5181-3395
5181-3396
5181-3397
5181-3398
5181-8809
5181-8811
5181-8813
5181-8815
5181-8816
5181-8818
5181-8818
5181-8830
5181-8830
5181-8833
5182-0543
5182-0549
5182-0552
5182-0714
5182-0715
24
38
38
39
39
47
47
47
13
13
5
2
33
33
13
42
42
42
44
44
Product Name
4 mm Splitless Liner
4 mm Split Precision Liner w/Deact. Wool
Restek Premium Liner, 4 mm Precision w/Wool
4 mm Single Taper Precision Liner w/Deact. Wool
Polyimide Resin
Compact Ferrules, 1/16"
Finger-Tight Capillary Column Nuts
for Compact Ferrules
21041
Finger-Tight Capillary Column Nuts
for Standard Ferrules
21040
Finger-Tight Capillary Column Nuts
for Compact Ferrules
21041
Finger-Tight Capillary Column Nuts
for Standard Ferrules
21883
Injector/Detector Plug Nuts
21710
Replacement Inlet Seal Washers
20212
V/G Ferrules, 0.5 mm ID
20211
V/G Ferrules, 0.4 mm ID
20213
V/G Ferrules, 0.8 mm ID
24848
V/G Ferrules, 2-hole, 0.4 mm ID
24849
V/G Ferrules, 2-hole, 0.5 mm ID
Single Taper Splitless Liner (4 mm) w/Deact. Wool
22405
Restek Premium Liner, 4 mm Single Taper w/Wool
23303.1
20964, 20965, DI Uniliner Liner
20966
20967
DI Glass Inserts
20252
Compact Ferrules, 0.8 mm
21685
Viton O-rings
23064
Silicone Washers for FID Collector Housing
20296, 20297 Graphite O-Rings, 6.35 mm ID
20298, 20299 Graphite O-Rings, 6.5 mm ID
22064
O-Rings for Trap Fittings
21174
11 mm Aluminum Crimp Seals w/Septa
21212, 24596 Syringe, Standard, 10 µL, fixed, 23-26 gauge
24513
Big Mouth Vial Insert w/Bottom Spring
21210, 24593 Syringe, Standard, 5 µL, fixed, 23-26 gauge
21136
FID Collector Nut and Washer
20784
Double Taper Splitless Liner (4 mm)
Restek Premium 4 mm Double Taper Liner
23308.1
Single Taper Splitless Liner (4 mm)
20798
Restek Premium 4 mm Single Taper Liner
23302.1
Syringe Needles
20165
21213, 24598 Syringe, Standard, 10 µL, removable, 23-26 gauge
21215, 24600 Syringe, Standard, 10 µL, fixed, 23-26 gauge, 6-pk.
24385
Vial, 2 mL Amber Crimp
24517
Vial Insert, 350 µL Flat Bottom
20964, 20965, DI Uniliner Liner
20966
20967
DI Glass Inserts
20400
Universal Press-Tight Connectors
20429
Universal Press-Tight Connectors, Deactivated
20405
Universal “Y” Press-Tight Connector
20405-261 Universal “Y” Press-Tight Connector, Deactivated
24789, 24894 Syringe, Gas-tight, 10 µL, fixed, 23 gauge
20164, 24825 Needle for 10 µL Gas-tight Syringe, 23 gauge
21224, 24797 Syringe, Gas-tight, 10 µL, removable, 23 gauge
22815
Microseal, Low Pressure (1 to 45 psi)
Microseal, Low Pressure Kit (1 to 45 psi)
22814
2 mm Splitless Liner
20712
Restek Premium 2 mm Splitless Liner
23313.1
Capillary Column Nut, Brass
21878
Capillary Column Nut, Stainless
21884
Microseal, Low Pressure Kit (1 to 45 psi)
22813
Vial, 2 mL Clear Crimp Top
24383
Big Mouth Vial Insert w/Bottom Spring
24518
Crimp Caps w/Septa
24359
Vial, 2 mL Clear, 9 mm Short Cap
21154
Vial, 2 mL Clear Screw Thread w/Mk Spot
21140
1-800-356-1688 or 1-814-353-1300
Part Number Cross-Reference
Similar to Agilent Part #
5182-0716
5182-0717
5182-0720
5182-0723
5182-0817
5182-0818
5182-0820
5182-0830
5182-0834
5182-0835
5182-0875
5182-3442
5182-3444
5182-3445
5182-9652
5182-9704
5182-9705
5182-9749
5182-9763
5183-2036
5183-2037
5183-2038
5183-2068
5183-2069
5183-4492
5183-4493
5183-4498
5183-4500
5183-4620
5183-4621
5183-4647
5183-4691
5183-4691
5183-4691
5183-4692
5183-4692
5183-4692
5183-4693
5183-4693
5183-4694
5183-4694
5183-4695
5183-4695
5183-4696
5183-4696
5183-4699
5183-4701
5183-4703
5183-4703
5183-4704
5183-4704
5183-4705
5183-4705
5183-4706
5183-4706
5183-4707
5183-4709
5183-4711
5183-4712
5183-4713
5183-4769
5183-4771
5188-5365
5188-5366
5188-6474
5188-6475
5190-2296
6040-0834
8660-0791
Page
44
44
44
44
51
51
51
47
46
46
46
13
13
13
15
51
51
12
15
3
3
3
44
44
42
42
42
42
34
34
6
6
5
2
6
5
2
5
1
5
2
5
2
5
2
6
6
5
2
5
2
5
2
5
2
5
6
6
6
6
51
51
12
12
51
51
3
27
26
Restek Part #
21142
24473
24485
24497
22028
22029
22030
24821
20172, 24793
21211, 21223
20170, 24783
22811
22812
22809
20476, 20477
22019
22020
22684
21409
23431.1
23432.1
23433.1
21141
21143
24384
24386
21175
24360
23026
23027
20994
20782
22401
23300.5
20783
22402
23300.25
22406
23303.5
22407
23303.25
20799
23302.5
20800
23302.25
20710
20995
20713
23313.5
20714
23313.25
20785
23308.5
20786
23308.25
20915
20973
20994
20995
20996
22031
22022
20377
22336
21982
21983
23334.1
24819
22685
Product Name
Vial, 2 mL Amber Screw Thread w/Mk Spot
Short-Caps, 9 mm PTFE Preassembled
Short-Caps, 9 mm PTFE/Sil Preassembled
Short-Caps, 9 mm PTFE/Sil/PTFE Preassembled
Ultra-High Capacity Moisture Filter
Ultra-High Capacity Oxygen Filter
Ultra-High Capacity Hydrocarbon Filter
Needle for 0.5 µL Standard Syringe, 23 gauge
Syringe, Standard, 5 µL, removable, 23 gauge
Syringe, Standard, 5 µL, removable , 23-26 gauge
Syringe, Standard, 5 µL, fixed, 23 gauge, 6-pk.
Microseal, General Purpose Kit (3 to 100 psi)
Microseal, General Purpose (3 to 100 psi)
Replacement Microseal Nut
Cross-Disk Inlet Seal, 0.8 mm Gold
Carrier Gas Cleaning Kit
Replacement Triple Gas Filter
Liner Seals for CIS4 and PTV
Silver PTV Seals
Single Baffle PTV Liner
Single Baffle PTV Liner w/Wool
Baffled PTV Liner
Vial, 2 mL Clear Screw Thread w/Mk Spot
Vial, 2 mL Amber Screw Thread w/Mk Spot
Vial, 2 mL Clear Crimp Top w/Mk Spot
Vial, 2 mL Amber Crimp Top w/Mk Spot
11 mm Aluminum Crimp Caps w/Septa
11 mm Aluminum Crimp Caps w/Septa
Shortix Capillary GC Column Cutter
Maintenance Kit for Shortix Cap. GC Column Cutter
Low Pressure Drop Liner w/Deact. Wool
4 mm Split Liner w/Deact. Wool
4 mm Splitless Liner w/Deact. Wool
Restek Premium 4 mm Straight Liner w/Wool
4 mm Split Liner w/Deact. Wool
4 mm Splitless Liner w/Deact. Wool
Restek Premium 4 mm Straight Liner w/Wool
Single Taper Splitless Liner (4 mm) w/Deact. Wool
Restek Premium 4 mm Single Taper Liner w/Wool
Single Taper Splitless Liner (4 mm) w/Deact. Wool
Restek Premium 4 mm Single Taper Liner w/Wool
Single Taper Splitless Liner (4 mm)
Restek Premium 4 mm Single Taper Liner
Single Taper Splitless Liner (4 mm)
Restek Premium 4 mm Single Taper Liner
Cup Splitter Liner
Low Pressure Drop Liner w/Deact. Wool
2 mm Splitless Liner
Restek Premium 2 mm Splitless Liner
2 mm Splitless Liner
Restek Premium 2 mm Splitless Liner
Double Taper Splitless Liner (4 mm)
Restek Premium 4 mm Double Taper Liner
Double Taper Splitless Liner (4 mm)
Restek Premium 4 mm Double Taper Liner
2 mm Splitless Liner
1 mm Split Liner
Low Pressure Drop Liner w/Deact. Wool
Low Pressure Drop Liner w/Deact. Wool
Low Pressure Drop Liner w/Deact. Wool
Gas Filter Bundle Kit
Replacement Fuel Gas Filter
Viton O-Rings
Viton O-Rings for Flip Top Inlet Sealing System
Replacement Helium-Specific Gas Filter
Helium-Specific Carrier Gas Cleaning Kit
Single Taper Liner w/Dimple
Inland 45 Pump Oil
Ion Source Cleaning Powder
1-800-356-1688 or 1-814-353-1300
Similar to Agilent Part #
9301-0713
9301-0714
9301-0725
9301-0891
9301-0892
9301-0977
9301-0978
G1099-20030
G1530-60960
G1530-61030
G1530-61950
G1530-80650
G1531-20550
G1531-20550
G1531-20690
G1531-20700
G1531-20740
G1531-60690
G1531-80560
G1531-80560
G1531-80580
G1531-80620
G1531-80630
G1544-20570
G1544-20590
G1544-60575
G1544-60575
G1544-60585
Page
46
46
46
46
46
42
42
26
21
20
20
21
28
28
29
29
28
29
30
30
28
30
28
20
20
18
18
18
Restek Part #
20167, 24785
24595, 24784
20169, 24787
24592, 24780
20168, 24781
24653
24651
21894
24323
23039
27200
22076
23043
23045
21139
21139
23044
21699
21620, 21683
21621, 21682
23052
23078
23053
27199
23042
22672
22674
22670
G1544-60585
18
22686
G1544-60610
G1544-80530
G1544-80550
G1544-80570
G1544-80570
G1544-80700
G1544-80700
G1544-80730
G1544-80730
G1544-80730
G2397-20540
G2613-20500
G3452-20500
20
20
20
18
18
7
7
7
7
2
31
32
20
23031
23032
22820
22671
22673
20954
20989
20756
20771
23306.1
27190
21172
27199
Product Name
Syringe, Standard, 10 µL, fixed, 23 gauge
Syringe, Standard, 10 µL, fixed, 26 gauge
Syringe, Standard, 10 µL, fixed, 23 gauge, 6-pk.
Syringe, Standard, 5 µL, fixed, 26 gauge
Syringe, Standard, 5 µL, fixed, 23 gauge
Vial, 2 mL Crimp Top w/Insert (Glass/Clr Plastic)
Vial, 2 mL Crimp Top w/Insert (Poly)
Capillary Installation Gauge
EPC Test Kit
Oven Temperature Sensor
Heater/Sensor Assembly
Air Diverter
FID Collector Mount
FID Collector Housing Kit
FID Collector (includes insulators)
FID Collector (includes insulators)
FID Collector Housing
FID Collector Assembly Kit (includes insulator)
FID Jet, High-Performance, 0.011-Inch ID Tip
FID Jet, Standard, 0.011-Inch ID Tip
FID Base Weldment, Pack Column FID
FID Jet, High-Temperature, 0.018-Inch ID Tip
FID Base Weldment, Capillary Column FID
Heater Block
Heater Block Retaining Nut
Replacement Weldment with EPC, Siltek
Replacement Weldment with EPC
Split/Splitless Weldment
(large canister type filter), Siltek
Split/Splitless Weldment
(for use with large canister type filter)
Optional Split Vent Trap Assembly
Replacement Traps (2) and O-Rings (4)
Replacement Split Vent Trap
Replacement Shell Weldment, Siltek
Replacement Shell Weldment
Double Taper Drilled Uniliner (hole near bottom)
Double Taper Drilled Uniliner (hole near bottom)
Drilled Uniliner (hole near bottom)
Drilled Uniliner (hole near bottom)
Restek Premium Drilled Uniliner (hole near bottom)
1 mm Micro ECD Liner
Injector Mounting Post
Heater Block
www.restek.com
53
More Parts & Accessories
for More GC Systems
Agilent
Bruker/Varian
PerkinElmer
Shimadzu
Thermo Scientific
and more!
www.restek.com/GCacc
Also look to Restek for:
GC Columns & Accessories | LC Columns & Accessories
Sample Preparation | Certified Reference Materials (CRMs) | Expert Support
Questions about this or any other Restek® product?
Contact us or your local Restek® representative (www.restek.com/contact-us).
Restek® patents and trademarks are the property of Restek Corporation. (See www.restek.com/Patents-Trademarks for full list.) Other trademarks in Restek® literature
or on its website are the property of their respective owners. Restek® registered trademarks are registered in the U.S. and may also be registered in other countries.
© 2012 Restek Corporation. All rights reserved. Printed in the U.S.A.
Pure Chromatography
www.restek.com
Lit. Cat.# GNMC1158A-UNV
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement