infrared thermometers - Terracene International Ltd.

infrared thermometers - Terracene International Ltd.
INFRARED THERMOMETERS
Features:
• Quickly scan surface temperatures without risk of cross
contamination
• HACCP Check “Go/No-Go” temperature monitoring to instantly
spot potential unsafe temperatures
• Verify internal temperature measurements
• Monitor cooking, cooling and holding times
• Unique targeting system illuminates the area being measured
• Hand washable (IP54 sealing, non-submersible)
Monitoring temperature is essential to keeping food safe, and is
required by the Food and Drug Administration (FDA). HACCP
(Hazard Analysis Critical Control Points) guidelines are recommended by the FDA for food service professionals and institutions
to help detect unsafe food conditions. HACCP programs incorporate the temperature at which a product should be stored, cooked,
or cooled, as well as the length of time food products can safely
remain at these temperatures. The FoodPro Series of food safety
thermometers provide temperature measurement solutions for
quick surface scans and essential internal measurements.
Model FP1U:
A noncontact, instant HACCP temperature scanner, the FoodPro
unit quickly measures food surface temperature and signals “safe”
or “unsafe” readings with green or red HACCP Check lights.
SPECIFICATIONS
Temperature Range
Accuracy
Resolution
Response Time
Spectral Response
Emissivity
Distance to Spot Size Ratio (D:S)
Working Range (Target Illumination)
Minimum Target Size
Illumination to IR Channel Offset
RTD TEMPERATURE PROBE
Temperature Range
Accuracy
Response Time
Sensor Type
Probe Dimensions
GENERAL
Power Supply/Battery Life
Display Hold (7 seconds)
Display Backlight
Max. Temp. Display
Adjustable Countdown Timer
Dimensions/Weight
PRICE
Model FP2U:
The FoodProPlus thermometer features instant noncontact
scanning for measuring surface temperatures, and a built-in
flip-down probe thermometer for taking internal temperature
measurements. The HACCP Check indicates at a glance
whether food temperatures are in safe ranges, and the integrated timer helps monitor cooking, cooling and holding times.
FP1U
FP2U
-30 to 200°C (-20 to 400°F)
-35 to 275°C (-30 to 525°F)
-32 to -26°C (-25 to -15°F): ±3°C (±5°F); -26 to 18°C (-15 to 0°F): ±2.5°C (±4°F);
0 to 65°C (32 to 150°F): ±1°C (±2°F); Below 0°C (32°F): ±1°C (±2°F) ±0.1°C/°F
Above 65°C (150°F): ±1.5% of reading
0.2°C (0.5°F)
<500ms after initial reading
8 to 14µm
Preset for foodservice applications
2.5:1 @ 90% energy
25 to 250mm (1 to 10”)
12mm (0.5”)
13mm (0.52”)
-40 to 200°C (-40 to 390°F)
-5 to 65°C (23 to 150°F): ±0.5°C (±1°F);
Below -5°C (23°F): ±1°C (±2°F);
Above 65°C (150°F): ±1% of reading
7 to 8 seconds (3 time constants)
Thin-film platinum, Class A, RTD
80mm (3.0”) L x 3.0mm (0.118”) diam.
1 x “AA” alkaline battery / 10 hrs. minimum
3
1 x 9V alkaline battery / 10 hrs. minimum
3
3
3
3
150 x 30 x 50mm (5.9 x 1.25 x 2”) / 100g (0.22 lb)
$130.00
$250.00
M1733E
161
INFRARED THERMOMETERS
These infrared thermometers are valued by professionals in a variety of industries -from industrial maintenance to food service, because they quickly and accurately and
safely measure surface temperature.
IR thermometers are easy to use, and since they do not contact the object being measured, they are the safest way to measure hot, hard-to-reach, or moving parts, while eliminating potential damage and contamination.
Just aim, pull the trigger and the MiniTemp thermometer shows the temperature in an
instant on its large, backlit display. Readings are displayed in your choice of °C or °F.
The simple to use Minitemp thermometer becomes even easier to operate when aiming
with the Laser Point (MT4U and MTFS), a single point laser which indicates the approximate center of the target spot.
The MTFS is a fast and effective screening tool specifically designed and calibrated to
meet food service industry accuracy requirements. The MTFS can be sued to measure
temperatures of food products such as soups and beverages; products in hot or cold
serving trays; and to assure high quality results by reaching ideal temperatures for
cooking, serving or storage.
FEATURES
Emissivity
Laser (Class II)
Temperature Display
Display Resolution
Backlit LCD
Display Hold (7 sec.)
Distance to Spot Size Ratio
Spectral Response
MT2U
Pre-set at 0.95
°C or °F
0.2°C/0.5°F
3
3
8:1
7-18µm
MT4U
Preset at 0.95
3
°C or °F
0.2°C/0.5°F
3
3
8:1
7-18µm
MTFS
Preset at 0.97
3
°C or °F
0.2°C/0.5°F
3
3
4:1
8-14µm
SPECIFICATIONS
Temperature Range
Accuracy
Repeatability
Response Time
Operating Conditions
Power Supply
Battery Life
Dimensions
Weight
Model
RAYMT2U
RAYMT4U
RAYMTFS
RAYMTAPK
162
MT2U & MT4U: -18 to 275°C (0 to 525°F);
MTFS: -30 to 200°C (-25 to 400°F)
MT2U & MT4U: -1 to 275°C/30 to 525°F: ±2% or ±2°C/±3.5°F
18 to -1°C/0 to 30°F: ±3°C/±5°F
MTFS: 0 to 65°C/32 to 150°F: ±1°C/±2°F; <0°C/32°F: ±1°C/
±2°F ±0.1°; >65°C/150°F: ±1.5% rdg.
±2% of reading or ±2°C (±3°F), whichever is greater
500 mSec, 95% of reading
0 to 50°C (32 to 120°F); 10 to 90% RH non-condensing
9V alkaline or NiCd battery
MT2U: 22 hours; MT4U & MTFS: 12 hours
152 x 101 x 38 mm (6 x 4 x 1.5”)
227 g (0.5 lb)
Description
Portable Infrared Thermometer
Portable Infrared Thermometer w/ Laser Point
Food Service Infrared Thermometer w/ Laser Point
Soft Pouch w/ Wrist Strap
M2189E
Price
$119.00
$149.00
$149.00
$20.00
INFRARED THERMOMETER
Features:
• A portable, easy-to-use, compact-sized, digital infrared
thermometer
• Unique flat surface and modern housing design
• Wide temperature range from -58 to 536°F (-50 to 280°C)
• User selectable °F or °C
• Built in laser pointer identifies target area
• Backlighting illuminates display for taking measurements at
night or in areas with low background light levels
• Overrange indicator, Auto data hold (when trigger released) and
Auto shut off
• Fixed 0.95 emissivity covers 90% of surface applications
• Includes battery and carrying case
Specifications:
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Display:
Battery Life:
Dimensions:
Weight:
-58 to 536°F (-50 to 280°C)
1°F/1°C
±2% of reading
8:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
Backlit LCD
1 x 9V alkaline battery
6.3 x 3.2 x 1.6” (160 x 82 x 41mm)
6.4 oz (177g)
Model
Description
ST-880
Infrared Thermometer
Price
$129.00
INFRARED THERMOMETER
Features:
•
•
•
•
•
•
Pocket-sized and easy-to-use - just point, shoot and read
Unique flat surface and modern housing design
Wide temperature range from -58 to 1022°F (50 to 550°C)
User selectable °F or °C
Built in laser pointer identifies target area
Backlighting illuminates display for taking measurements at
night or in areas with low background light levels
• Overrange indicator, Auto data hold (when trigger released) and
Auto shut off
• Fixed 0.95 emissivity covers 90% of surface applications
• Includes battery and carrying case
Specifications:
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
display:
Battery Life:
Dimensions:
Weight:
-58 to 1022°F (-50 to 550°C)
0.1 up to 200°; 1° over 200°
±2% of reading
8:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
Backlit LCD
1 x 9V alkaline battery
6.3 x 3.2 x 1.6” (160 x 82 x 41mm)
6.4 oz (177g)
Model
Description
ST-882
Infrared Thermometer
M1710E
Price
$149.00
163
INFRARED THERMOMETER
Features:
Specifications:
• An easy-to-use infrared thermometer and humidity
meter in one compact unit
• User selectable °F or °C
• Large, easy to read, backlit LCD
with dual display
• Max and Hold function, Auto shut off
• Fixed 0.95 emissivity covers 90% of
surface applications
• Includes battery and carrying case
Temperature Range:
Resolution:
Accuracy:
Humidity Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Display:
Battery Life:
Dimensions:
Weight:
Model
ST-616CT
-58 to 932°F (-50 to 500°C)
0.1 up to 200°; 1° over 200°
±2% of reading
0 to 100% RH
0.1% RH
±3.5% RH
8:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
Dual backlit LCD
1 x 9V alkaline battery
5.9 x 2.8 x 1.4” (150 x 72 x 35mm)
7.4 oz (210g)
Description
Infrared Thermo-Hygrometer
Price
$225.00
INFRARED THERMOMETER
Features:
Specifications:
• A portable, easy-to-use, pocketsized, digital infrared thermometer
• User selectable °F or °C
• Large LCD backlit display
• Fixed 0.95 emissivity covers 90%
of surface applications
• Auto data hold and Auto shut off
• Optional carrying case can be
ordered separately
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Display:
Battery Life:
Dimensions:
Weight:
-22 to 518°F / -30 to 270°C
1°F/1°C
±2.5% of reading
6:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
Backlit LCD
1 x 9V alkaline battery
3.7 x 2.1 x 1” (94 x 56 x 28mm)
2.7 oz (76g)
Model
Description
IR-77
Infrared Thermometer
Price
$165.00
INFRARED THERMOMETER
Features:
Specifications:
• Pocket-sized, troubleshooting infrared
thermometer with laser sighting
• User selectable °F or °C
• Fixed 0.95 emissivity covers 90% of
surface applications
• Built-in laser pointer identifies target
area
• Auto data hold, Max hold and Auto
shut off
• Overload and low battery indications
• Optional carrying case can be
ordered separately
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Display:
Battery Life:
Dimensions:
Weight:
164
-4 to 518°F / -20 to 270°C
1°F/1°C
±2.5% of reading
6:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
LCD
1 x 9V alkaline battery
3.7 x 2.1 x 1” (94 x 56 x 28mm)
2.7 oz (76g)
Model
Description
IR-88
Infrared Thermometer
M1711E
Price
$98.00
INFRARED THERMOMETER
Features:
Specifications:
• User selectable °F or °C
• Built-in laser pointer
• Backlighting illuminates display for
taking measurements at night or in
areas with low background light
levels
• Auto data hold (when trigger
released) and Auto shut off
• Fixed 0.95 emissivity covers 90% of
surface applications
• Optional carrying case can be
ordered separately
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Battery Life:
Dimensions:
Weight:
Model
ST-8810
-4 to 518°F (-20 to 270°C)
1°F/1°C
±2% of reading
8:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
1 x 9V alkaline battery
6.25 x 3.1 x 2.25” (159 x 79 x 57mm)
6.3 oz (180g)
Description
Infrared Thermometer
Price
$119.00
INFRARED THERMOMETER
Features:
Specifications:
• User selectable °F or °C
• Built-in laser pointer
• Backlighting illuminates display for taking measurements at night or in areas
with low background light levels
• Audible and visible overrange indications
• Auto data hold (when trigger released)
and Auto shut off
• Fixed 0.95 emissivity covers 90% of
surface applications
• Optional carrying case can be ordered
separately
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Battery Life:
Dimensions:
Weight:
Model
ST-8811
-4 to 842°F (-20 to 450°C)
1°F/1°C
±2% of reading
8:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
1 x 9V alkaline battery
6.25 x 3.1 x 2.25” (159 x 79 x 57mm)
6.3 oz (180g)
Description
Infrared Thermometer
Price
$129.00
INFRARED THERMOMETER
Features:
Specifications:
• User selectable °F or °C
• Built-in laser pointer
• Backlighting illuminates display for
taking measurements at night or in
areas with low background light levels
• Automatic ranging
• Audible and visible overrange indications
• Auto data hold (when trigger released)
and Auto shut off
• Fixed 0.95 emissivity covers 90% of
surface applications
• Optional carrying case can be ordered
separately
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Battery Life:
Dimensions:
Weight:
Model
ST-8812
M1712E
-58 to 932°F (-50 to 500°C)
0.1° up to 200°; 1° over 200°
±2% of reading
8:1 Distance to Spot Size Ratio
Fixed at 0.95
< 1 second
1 x 9V alkaline battery
6.25 x 3.1 x 2.25” (159 x 79 x 57mm)
6.3 oz (180g)
Description
Infrared Thermometer
Price
$139.00
165
INFRARED THERMOMETERS
Features:
•
•
•
•
•
•
•
•
•
Compact infrared thermometers with laser sighting
Built-in laser pointer identifies target area
User selectable °F or °C
12 :1 distance to spot ratio measures smaller surface areas at
a greater distance
Unique flat surface and modern housing design
Backlighting illuminates display for taking measurements at
night or in areas with low background light levels
Overrange indicator, Auto data hold (when trigger released) and
Auto shut off
Fixed 0.95 emissivity covers 90% of surface applications
Includes battery and carrying case
Specifications:
Model
ST-8819
Model
ST-8828
Temperature Range: ST-8818: -58 to 1022°F (-50 to 550°C);
ST-8819: -58 to 1382°F (-50 to 750°C);
ST-8828: -58 to 1832°F (-50 to 1000°C)
Resolution:
0.1 up to 200°; 1° over 200°
Accuracy:
±2% of reading
Optical Resolution:
12:1 Distance to Spot Size Ratio
Emissivity:
Fixed at 0.95
Response Time:
< 1 second
Display:
Backlit LCD
Battery Life:
1 x 9V alkaline battery
Dimensions:
9 x 3.9 x 2.2” (230 x 100 x 56mm)
Weight:
10.2 oz (290g)
Model
ST-8818
ST-8819
ST-8828
Description
Infrared Thermometer
Infrared Thermometer
Infrared Thermometer
Price
$225.00
$255.00
$285.00
INFRARED THERMOMETERS
Features:
•
•
•
•
•
•
•
•
Precise non-contact temperature measurements
Fahrenheit/Celsius selectable
Digitally adjustable emissivity from 0.10 to 1.0
High and low alarm setpoints
Max, Min and Dif. Avg. temperature displays
Built-in laser pointer
Large LCD with backlight and display hold
Includes battery and carrying case
Specifications:
Temperature Range:
Resolution:
Accuracy:
Optical Resolution:
Emissivity:
Response Time:
Battery Life:
Model
ST-8838
ST-8839
166
M1708E
-58 to 1832°F (-50 to 1000°C)
0.1 up to 200°; 1° over 200°
±2% of reading
ST-8838: 30:1 Distance to spot size ratio;
ST-8839: 50:1 Distance to spot size ratio
Adjustable from 1.10 to 1.0
< 1 second
1 x 9V alkaline battery
Description
Infrared Thermometer
Infrared Thermometer
Price
$375.00
$455.00
INFRARED THERMOMETERS
Handheld and portable, the STProXB and STProPlus XB series
of infrared thermometers measure surface temperatures, helping
to quickly locate potential blockages or malfunctioning systems.
These IR thermometers leap ahead of standard entry level models by providing expanded temperature ranges, higher resolution
optics, tighter accuracy and brighter laser sighting. Temperature
readings are displayed in less than a second with a 1% accuracy
in your choice of °C or °F.
Model RAYST20XB
Model ST20XB:
Standard model with extra-bright single-point laser sighting that
highlights the center point of the measurement area and makes it
more visible in all conditions, especially outdoors, and a temperature range of -32 to 535°C (-25 to 999°F).
Model ST60XB:
Enhanced model with hi/lo alarm, 12-point data logging, advanced optics to measure smaller targets at greater distances, and
adjustable emissivity for more accurate temperature measurements. Selectable MAX, MIN, DIF and AVG functions display
values instantly. This model has a temperature range of -32 to
600°C (-25 to 1100°F) and a D:S ratio of 30:1. An RTD probe
input jack allows the user to do both contact and noncontact
temperature measurements with the one model.
Model RAYST80XB
Model ST80XB:
This model has all the features of the ST60XB, but with an
expanded temperature range of -32 to 760°C (-25 to 1400°F) and
optics that allows the user to measure smaller objects from
farther away.
Model ST80XB-IS:
This model is an intrinsically safe version of the ST80XB and is
designed for noncontact temperature measurement in potentially
explosive or flammable environments.
SPECIFCATIONS
ST20XBUS
Model
Description
RAYST20XBUS
RAYST60XBUS
RAYST80XBUS
RAYST80XBISUS
XXXSTACPRX
XXXSTACSC
ST60XBUS
Infrared Thermometer
Infrared Thermometer
Infrared Thermometer
Intrinsically Safe IR Thermometer
RTD Temperature Probe
Soft Pouch
Price
$285.00
$495.00
$655.00
$995.00
$85.00
$35.00
ST80XBUS/ST80XBIS
Temperature Range
Resolution
Accuracy
-32 to 535°C (-25 to 999°F)
-32 to 600°C (-25 to 1100°F)
-32 to 760°C (-25 to 1400°F)
0.2°C (0.5°F)
0.1°C (0.1°F)
0.1°C (0.1°F)
-32 to -26°C (-25 to -15°F): ±3°C (±5°F); -26 to 18°C (-15 to 0°F): ±2.5°C (±4°F);
-32 to -26°C (-25 to -15°F): ±3°C (±5°F); -26 to -18°C (-15 to 0°F): ±2.5°C (±4°F);
-18 to 23°C (0 to 73°F): ±2°C (±3°F); 23 to 510°C (73 to 950°F): ±1% rdg. or ±1°C (±2°F),
whichever is greater; Above 510°C (950°F): ±1.5% rdg.
Repeatability
±0.5% or ≤ ±1°C (±2°F), whichever is greater
D:S (Distance to Spot Size)
12:1
30:1
50:1
Distance to Target
2m (6 ft.)
5m (15 ft.)
8m (25 ft.)
Emissivity
Pre-set to 0.95
Adjustable (0.1 to 1.0 by 0.01)
Adjustable (0.1 to 1.0 by 0.01)
Response Time (95% of reading)
500 mSec
500 mSec
500 mSec
Spectral Response
8-14µm
8-14µm
8-14µm
3
3
3
Backlit LCD
3
3
3
Display Hold (7 sec.)
3
3
MAX, MIN, DIF, & AVG
MAX only
3
3
12-point Data Logging
3
3
HI/LO Alarm
3
3
RTD Probe Input
3
3
Locking Trigger
3
3
3
Tripod Mount
3
3
3
Hard Carrying Case
Power Supply
9V alkaline or NiCd battery
9V alkaline or NiCd battery
9V alkaline or NiCd battery
Battery Life (Alkaline)
10 hrs. w/ laser & backlight ON;
20 hrs. w/ laser & backlight ON 50%; 40 hrs. OFF
20 hrs. OFF
Dimensions/Weight
200 x 160 x 55mm (8 x 6 x 2”) / 320g (11oz)
M2190E
167
INFRARED THERMOMETERS
These infrared thermometers are ideal for quick, non-contact
surface temperature measurements of rotating, hard-to-reach,
electronically live, or dangerously hot targets. These handheld,
portable tools enable professionals to research heating and
ventilation problems, monitor the status of electrical motors
electrical panels, and diagnose car malfunctions with ease.
Targeting objects is easy with the single dot laser guiding system
that guides measurements to the right target and indicates the
approximate center of the measurement area. In less than a
second, the large, backlit display provides current surface
temperatures, that are easy to read, even in the dark.
The 80PR-60 RTD Temperature Probe expands the utility of your
infrared thermometer by allowing you to take contact temperature
readings. Make contact and noncontact readings at the same time
because your infrared thermometer displays the results of both.
• Temperature Range: -40 to 260°C
• Accuracy: ±1°C
• Jack: 3.5mm phono jack
• Probe Dimensions: 90mm (3.5”) L x 4.8mm (0.187”) diam.
• Cable Length: 1000mm (40”) extended
Model
Description
80PR-60
H6
Price
RTD Temperature Probe
Soft Case
$80.00
$32.00
Specifications:
Model
Temperature Range
Resolution
Repeatability
Emissivity
Distance to Spot Ratio
Spectral Response
MIN/MAX/AVG
Display Hold (7 seconds)
Backlit Display
Datalogging
Hi/Lo Alarm
RTD Probe Jack
Power Supply
Dimensions
Weight
Accuracy
Price
168
61
65
63, 66, 68
61
65
63
66
68
-18 to 275°C
-40 to 500°C
-32 to 535°C
-32 to 600°C
-32 to 760°C
(0 to 525°F)
(-40 to 932°F)
(-25 to 999°F)
(-25 to 1100°F)
(-25 to 1400°F)
0.2°C (0.5°F)
0.1° < 200°; 1° > 200°
0.2°C (0.5°F)
±2% or ±2°C/3.5°F
±1% or ±1°C/°F
±0.5% or ±1°C/2°F
whichever is greater whichever is greater whichever is greater whichever is greater whichever is greater
Fixed at 0.95
Fixed at 0.95
Fixed at 0.95
Adjustable, 0.1 to 1.0 by 0.01
8:1
8:1
12:1
30:1
50:1
8 to 14 µm
8 to 14 µm
8 to 14 µm
8 to 14 µm
8 to 14 µm
Max only
MAX only
All
All
•
•
•
•
•
•
1 x 9V battery
2 x AA batteries
•
•
•
•
•
•
•
•
•
•
1 x 9V battery
1 x 9V battery
1 x 9V battery
200x 160 x 55mm 200x 160 x 55mm 200x 160 x 55mm
(8 x 6 x 2”)
(8 x 6 x 2”)
(8 x 6 x 2”)
320 g (11 oz)
320 g (11 oz)
320 g (11 oz)
-18 to -1°C (0 to 30°F): ±3°C (±5°F); -1 to 275°C (30 to 525°F): ±2% rdg. or ±2°C (±3.5°F)
Above 0°C (32°F): ±2°C (±4°F); Below 0°C (32°Ï): ±5°C (±9°F)
-32 to -26°C (-25 to -15°F): ±3°C (±5°F); -26 to -18°C (-15 to 0°F): ±2.5°C (±4°F);
-18 to 23°C (0 to 73°F): ±2°C (±3°F); Above 23°C (73°F): ±1% rdg. or ±1°C (±2°F), whichever is greater
$169.00
$448.00
$316.00
$549.00
$727.00
M1709E
INFRARED THERMOMETERS
Designed for ease-of-use, unmatched performance, and featuring new
laser technology, the MX family of handheld, infrared thermometers
is the professional's tool of choice.
Features:
MODEL
Adjustable Emissivity
16-point Laser Circle Spot
Audible/Visible High Alarm
MAX & MIN Temperature
MX2
MX4
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DIFF & AVG Temperature
Bar Graph Display
Display Backlight
Display Hold
•
•
•
Data Output
100-point Data Logging Memory
Data Graphing Software
Hard Carrying Case
•
The MX measures to 1600°F from any distance, with a target distance-to-size ratio of 60:1. Its 16-point sighting circle defines your
targert precisely. Ths display shows real-time readings and has a
bar graph that plots the last 10 temperature points, so that you
can spot fluctuations and short-term trends. The locking trigger
allows for continuous temperature measurement. Other features
include adjustable emissivity, audible/visual high alarm and
max/min readings.
The MX2 is the standard model. Just point, shoot and read. The
MX4P is the high performance model that includes audible/visual
low alarm, differential and average calculations, and on-board
emissivity table. The MX4P also lets you scroll through and
select from a table of 30 preset material emissivity listings for the
best precision. The MX4P packages together everything you
need to fully utilize the extra features: Windows™ compatible software, type K thermocouple probe, RS-232 cable and plug-in
power supply.
With graphing software, you can use your PC to organize, display, and print temperature and time data. The software also
includes the ability to store data points, continuous or manual
single-point recording, programmable time intervals, temperature
scales and limits, built-in material table or emissivity values, customizable log locations, and displays both contact and infrared
temperatures.
Specifications:
Temperature Range:
Accuracy:
-30 to 900°C (-25 to 1600°F)
±0.75% rdg. or ±1°C (±2°F);
whichever is greater
Repeatability:
≤ ±0.5% rdg. or ±1°C (±2°F);
whichever is greater
Display Resolution:
0.1°C up to 900°C (0.2°F to 999.8°F)
Response Time:
250msec (95% of reading)
Spectral Response:
8 to 14 µm, thermopile detector
Emissivity:
Adjustable from 0.1 to 1.0 by 0.01
Distance to Target Ratio: 60:1
Outputs:
1mV/ °F or °C, or RS-232, selectable
Ambient Conditions:
32 to 120°F (0 to 50°C), 10 - 90% RH
Power Supply:
2 "AA" batteries, DC power for MX4
Dimensions (LWH):
7.9" x 6.7" x 2" (1200 x 170 x 50 mm)
Weight:
1lb 6oz (480g)
Tripod Mount:
1/4 - 20 UNC
Model
RAYMX2TD
RAYMX4PTD
M827E
Description
Basic Infrared Thermometer
Deluxe Infrared Thermometer
Price
$995.00
$1495.00
169
INFRARED THERMOMETERS
Raynger 3i models handle a variety of maintenance and quality
control applications. Choose the 3i that matches your temperature range and optical requirements, then pick the sighting option
that best meets the needs of your specific application.
In addition to displaying real-time temperature, the Raynger 3i
calculates, Maximum, Minimum, Difference and Average temperatures, while the recall features allows you to access the last
temperature reading. The 3i also compensates for energy reflected
by the background around your target so it doesn’t affect your
reading. The backlit display is easy to read under poor lighting
conditions. A locking trigger allows continuous operation, while
adjustable Hi/Lo alarms signal over and under-range temperature
conditions.
The 3i can also store up to 100 data points in an on-board datalogger, eliminating the need for clipboards, recording devices, or
other peripheral hardware. Data output from the 3i provides a
direct interface with chart recorders and printers. All models are
equipped with an output jack capable of providing either analog
or digital signals.
Each 3i is equipped with a padded nylon carrying case, shoulder
strap, and tripod mount.
Laser Sighting Options:
Single Laser (L2, L3): The single laser is designed for accuracy
over distance. Single laser models pinpoint the center of your target area with a bright laser spot.
Dual Laser (DL2, DL3): The dual laser indicates the diameter of
the target area measured with two glowing spots.
Crossed Laser (CL2, CL3): For precise measurement of smaller
targets, minimum measurement spot is indicated at the point the
two laser beams meet.
Scope & Scope with Laser (SC, SCL2): Measure temperature at
a distance in bright daylight. At the focus point, 3i scopes are parallax-free and provide circular reticles for pinpoint accuracy. To
enhance the sighting capabilities of the scope, try a combined
scope with laser model.
Model
Description
Temperature
Range
-30 to 1200°C
(-20 to 2220°F)
RAYR3iLTDL2U
General Purpose
RAYR3iLTDL3U
RAYR3iLTCL2U
RAYR3iLTCL3U
RAYR3iLTSCU
RAYR3iLRL2U
General Purpose
-30 to 1200°C
RAYR3iLRL3U
Long Range
(-20 to 2220°F)
RAYR3iLRSCU
RAYR3iLRSCL2U
RAYR3i1ML2U
High Temperature
600 to 3000°C
RAYR3i1ML3U
Metals Applications (1100 to 5400°F)
RAYR3i1MSCU
RAYR3i2ML2U
High Temperature
200 to 1800°C
RAYR3i2ML3U
Metals Applications (400 to 3275°F)
RAYR3i2MSCU
RAYR3iG5SCU
Glass & Secondary 150 to 1800°C
Metals Processing (300 to 3275°F)
RAYR3iP7DL2U
Thin-film Plastics
10 to 800°C
RAYR3iP7DL3U
(50 to 1450°F)
L2 = IEC Class 2; FDA Class II
L3 = FDA Class IIIA
170
Specifications:
Accuracy:
Repeatability:
Resolution:
Emissivity:
Response Time:
Power Supply:
Dimensions:
Weight:
Optical
Resolution
75:1
75:1
75:1
75:1
75:1
120:1
120:1
120:1
105:1
180:1
180:1
180:1
90:1
90:1
90:1
25:1
Spectral
Response
8-14µm
8-14µm
8-14µm
8-14µm
8-14µm
8-14µm
8-14µm
8-14µm
8-14µm
1µm
1µm
1µm
1.6µm
1.6µm
1.6µm
5µm
25:1
25:1
7.9µm
7.9µm
±1% rdg. or ±1°C (±1.5°F), whichever is greater
±0.5% rdg. ±1°C (±1°F), whichever is greater
1°C or 1°F
Adjustable from 0.10 to 1.00 by 0.01
700 msec (1M & 2M: 550 msec)
4AA batteries or 6-9V, 200mA DC
Laser: 208 x 257 x 71mm (8.2 x 10.1 x 2.8”)
Scope: 244 x 257 x 71mm (9.6 x 10.1 x 2.8”)
Laser: 794g (1.75 lb)
Scope: 1000g (2.21 lb)
SC = Scope for distance in bright sunlight
S = Single laser
M1734E
L2
Sighting Type & Style*
L3 SC S
D
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
D = Dual laser
C = Crossed laser
•
•
Price
$3090.00
$3090.00
$3630.00
$3630.00
$3090.00
$3320.00
$3320.00
$3090.00
$3695.00
$3550.00
$3550.00
$3320.00
$3630.00
$3630.00
$3630.00
$3630.00
$3630.00
$3630.00
INFRARED THERMOMETER
Measure temperatures instantly, without contact, while simultaneously
recording digital photos of the measured area and its surroundings.
Features:
• Temperature measurement locations are instantly captured in a
digital photo with a time and date stamp in the image
• Max/Min, Differential and Average temperatures displayed
• Audible/visible high and low alarms
• Bargraph display
• 30 pre-set common material emissivities
• Adjustable emissivity values from 0.1 to 1.0 by 0.01 increments
• 100 points of data logging capability, with 26 VGA images or
10 1/4 VGA images
• Customized log location names and alarms
• Backlit LCD with display hold
• True Dimension is an extra bright coaxial three point laser
sighting system that accurately shows the diameter of the
measurement spot for all distances
• Sub Zero Option: Measure temperatures from -50°C (-58°F0
through 500°C (932°F)
• Close Focus Option: Measure objects as small as 6mm
(0.24") at 300mm (11.4") distance
• Standard accessories include DataTemp MX software, USB
computer cable, type K thermocouple probe, hardshell carrying
case, and user guide on CD
Specifications:
Temperature Range:
DataTemp MX Software Features:
• Windows 98, 2000 & XP compatible software (USB 1.1 port
required)
• Visualize and systematically maintain and analyze temperature
data
• Export data and images in common file formats for compatibility
with standard programs
• View minimum, maximum and average temperatures
• Tailor high/low alarms to location
• Visually find and review trends
• Quickly compare temperatures of up to five locations
• Display infrared temperatures over time
• Simultaneously see temperature trend and photo
• Record photos while in continuous measuring mode
• Set Photo Temp to take photos when high/low alarms are
exceeded
• Import temperature data and photographs to create reports
-30 to 900°C (-25 to 1600°F)
-50 to 500°C (-58 to 932°F) w/
Sub Zero option
Accuracy:
±0.75% rdg. or ±0.75°C (±1.5°F);
whichever is greater
Repeatability:
≤ ±0.5% rdg. or ≤ ±1°C (±2°F);
whichever is greater
Display Resolution:
0.1°C up to 900°C (0.2°F to 999.8°F)
Response Time:
250msec (95% of reading)
Spectral Response:
8 to 14 µm, thermopile detector
Emissivity:
Adjustable from 0.1 to 1.0 by 0.01
Distance to Target Ratio: 60:1 (50:1 w/ Close Focus option)
Measurement Diameter: 19mm (0.76”) 6mm (0.24”) w/ Close
Focus option
Ambient Conditions:
32 to 120°F (0 to 50°C), 10 - 90% RH
Power Supply:
2 "AA" batteries
Battery Life:
8 hrs (13 hrs w/ photographic mode
OFF); 50 photos with flash (200
photos without flash)
Dimensions (LWH):
7.9" x 6.7" x 2" (1200 x 170 x 50 mm)
Weight:
1lb 6oz (480g)
Tripod Mount:
1/4 - 20 UNC
Model
RAYMX6TD
M1713E
Description
Photographic Infrared Thermometer
Price
$2295.00
171
NON-CONTACT TEMPERATURE SENSORS
Specifications:
Temperature Range:
-40 to 600°C (40 to 1112°F);
-25 to 600°C for J-T/C output
±1% of reading or ±1°C (2°F);
whichever is greater
T/C output: ±1% of reading or ±2.5°C;
whichever is greater
±0.5% of reading or ±0.5°C (1°F);
whichever is greater
0.3°C (0.5°F)
0.15K/K or 0.15%/K, whichever is
greater
150 mSec (95% response)
10:1
8 to 14 µm
Adjustable, 0.100 to 1.100 by 0.001
Peak/Valley Hold, variable averaging
filter, adjustable up to 998 seconds
Accuracy:
Features:
Small sensing head fits where other sensors can’t
Remote electronics box
Ambient operating range to 85°C (185°F) without cooling
5-digit backlit LCD user interface
Adjustable emissivity, Peak Hold, Valley Hold and Averaging
functions
1% accuracy from -40 to 600°C (-40 to 1112°F)
10:1 optics
RS-232 digital communications for remote setup and monitoring
Accessories for cooling and air purging
Repeatability:
The Raytek MID is a two piece infrared temperature measurement system with miniature sensing head and separate electronics. The sensor is small enough to be installed just about anywhere yet if performs as well as much larger systems. The MID
electronics include a host of signal processing features which
you don’t normally find in systems in this price range, including
emissivity, peak hold, valley hold, and averaging function, all of
which are adjustable on the 5-digit LCD user interface.
Designed for a wide range of applications where the temperature
is in the range of -40 to 600°C (-40 to 1112°F), the sensor is
housed in a rugged stainless steel enclosure to ensure long term
performance, even in harsh industrial environments with ambient
temperatures up to 85°C (185°F) without cooling. Although the
MID is small in size, it still has the features you need, with 1%
accuracy, 10:1 optics and user selectable output signals. And the
MID’s response time is as fast or faster than many advanced
systems.
Even more features are available with the RS-232 communications and the DataTemp MultiDrop software. These features
include remote control and monitoring of sensor variables, a 5V
alarm signal triggered by a target temperature or head ambient
temperature, an 8-position recipe table that can be easily interfaced to an external control system, an external reset signal input
for signal processing, and even external inputs for analog emissivity adjustment or reflected energy compensation.
ELECTRICAL
Outputs:
•
•
•
•
•
•
•
•
•
172
Resolution:
Temp. Coefficient:
Response Time:
Optical Resolution:
Spectral Response:
Emissivity:
Signal Processing:
Alarm Relay:
Output Impedance:
Min. Load Impedance:
Max. Loop Impedance:
Current Draw:
Power Supply:
MECHANICAL
Environmental Rating:
Sensor Dimensions:
Weight (w/ 1m cable):
Electronics Dimensions:
Weight:
M2191E
Model
RAYMID10LT
RAYMID10LTCB3
RAYMID10LTCB8
RAYMID10LTCB15
XXXMIACFB
XXXMIACAB
XXXMIACAJ
XXXMIACCJ
Scalable 4-20mA, 0-20mA, 0-5V,
J or K thermocouple
10mV/°C
50Ω (T/C output)
100kΩ (mV output)
500Ω (mA output)
100mA
12-24 VDC, ±10%
NEMA-4 (IP 65)
14mm dia. x 28mm L(0.55 x 1.1”)
50 g (1.75 oz)
80 x 60 x 25 mm (3.2 x 2.4 x 1.0”)
270g (9.5 oz)
Description
Infrared Temp. Sensor, 1m cable
Infrared Temp. Sensor, 3m cable
Infrared Temp. Sensor, 8m cable
Infrared Temp. Sensor, 15m cable
Fixed Mounting Bracket
Adjustable Mounting Bracket
Air Purge Jacket
Air Cooling/Purging System
Price
$650.00
$690.00
$755.00
$820.00
$40.00
$65.00
$95.00
$280.00
TEMPERATURE MONITORING SYSTEM
Measurement Specifications:
(Monitor w/Sensing Head):
Spectral Response & Temperature Range
Sensing Head Model: Spectral Response: Temperature Range:
GPR
8 to 14 microns
-18-538°C (0-1000°F)
GPM
7.6 to 18 microns
-18-538°C (0-1000°F)
System Accuracy:
GP/GPR
±1% of measured value or ±1°C (2°F)
whichever is greater, @ 23°C ±5°C
(73°F ±9°F) ambient
GP/GPM
±0.5% of measured value or ±1°C (2°F)
whichever is greater
Response time (95%):
GPR
400 mSec
GPM
750 mSec
Emissivity:
0.1 to 1.09 digitally adjustable increments of .01
Signal Processing:
Peak/Valley Hold (up to 998 sec,
999=infinite hold with external reset
Variable averaging filter (up to 60 seconds)
T-ambient: fixed background ambient
temperature compensation
Features:
•
•
•
•
•
•
•
•
•
•
•
•
Temperature range from -18 to 538°C (0 to 1000°F)
Compact 1/8 DIN digital monitor with large 4-digit display
Monitor and sensor functions configured on front panel
Signal processing capabilities typically found on much
larger systems
Adjustable emissivity and t-ambient parameters
Universal 110-220 VAC power included
User-defined 4-20 mA output
Adjustable dual setpoints and deadband alarm outputs
Choice of sensing head to match application requirements
Standard- and close-focus optics available
Accessories for cooling and air purging
Field interchangeable sensing heads
Electrical Specifications:
Outputs:
Power Supply:
The Thermalert® GP™ Series is a versatile, two-piece temperature
monitoring system which combines a compact, value-priced monitor
with an infrared sensing head. The heart of the system is the 1/8 DIN
GP monitor which provides advanced infrared processing capabilities
including peak and valley hold, averaging, and a user-adjustable offset. The rugged Thermalert GPR sensor is available with standardor close-focus options and provides target temperature readings with
1% accuracy.
4-digit, 7-segment LED display, °C/°F selectable
User configurable 4-20 mA current output
Two adjustable setpoints with deadbands
controlling + 5 V alarm outputs
110/220 VAC, ±20%, 50-60 Hz
User configurable inputs for GPR, GPM,
and 0-5 V or 4-20 mA sensor
External Reset input to reset Peak/Valley hold
24 VDC/50 mA excitation voltage
General Specifications:
Environmental Rating:
GP Monitor Front Panel
GPR Sensing Head
GPM Sensing Head
Along with its large 4-digit LED display, the monitor provides a userdefined 4-20 mA output and two adjustable setpoints/deadbands with
alarm outputs, capable of driving solid state relays. The GP monitor
accepts universal 110-220 VAC power, and provides a 24 VDC/50
mA excitation voltage for loop power to external sensors. All monitor
functions are configured via the front panel, including °C/°F switching.
IP 54 (IEC 529); NEMA-12
IP 65 (IEC 529); NEMA-4*
IP 65 (IEC 529); NEMA-4
*GPR rated with adapter and compression fitting
Ambient Temperature Range:
GP Monitor
GPR Sensing Head
with optional water cooling
GPM Sensing Head
with optional air cooling
Storage Temperature:
Relative Humidity:
GP Monitor Dimensions:
GP Monitor Weight:
0 to 50°C (32 to 120°F)
0 to 65°C (32 to 150°F)
0 to 177°C (32 to 350°F)
0 to 85°C (32 to 185°F)
0 to 200°C (32 to 392°F)
-30 to 65°C (-22 to 150°F)
10 to 95%, non-condensing
1/8 DIN x 120 mm
(1.75 x 3.63 x 4.75 in.)
320 g (0.7 lbs.)
Model
Description
The GP monitor provides adjustable emissivity and ambient compensation when used with the GPR infrared sensor. This high performance, 8 to 14 micron infrared sensor with detachable cable combines current loop driven signals with 35:1 optics.
The GPM sensor is a miniature stainless steel sensing head with 2:1
or 10:1 optics. The GP monitor also works with other Raytek infrared
sensors, including the Thermalert CI and Thermalert TX..
Accessories/Options:
(must be specified at time of order)
• Cooling housings for high ambient conditions
• Air purge fittings for optics
• Right angle mirror
• Adjustable mounting brackets and adapters
• External isolated solid state relays for alarm outputs
(10 Amp AC, 8 Amp DC)
RAYGPC
RAYGPCM
RAYGPRSF
RAYGPSSFL
M2192E
Thermalert Monitor
Thermalert GP Monitor
Thermalert GP Regular Sensing Head
Laser Sighted Sensor
Price
$465.00
$555.00
$825.00
$1295.00
173
INFRARED TEMPERATURE SENSORS
The Thermalert® TX™ combines high performance non-contact
temperature measurement with industry standard two-wire technology. Choose between the smart TX sensor with remotely addressable
digital control, or the basic TX.
Smart TX sensors provide digital communications, as well as 4-20
mA output, allowing remote configuration and monitoring. Up to 15
sensors can be installed on a single multidrop network.
Smart TX sensors feature remotely adjustable temperature and output subranges, adjustable emissivity, ambient temperature check,
and a user-defined alarm output. Averaging and Advanced
Peak/Valley Hold algorithms are provided for accurate measurement
of complex discrete processes.
DataTemp® TX Windows® software provides an easy-to-use interface for configuration and monitoring. Temperatures can be archived
or exported to other applications for analysis and process documentation.
Basic TX models provide the same accuracy, repeatability, and
response time as the smart TX sensors, with fixed temperature and
output ranges. Emissivity on these models is switched manually at
the sensor.
Measurement Specifications:
Model:
LT (Low Temp)
LTO (Low Temp)
MT (Medium Temp)
HT (High Temp)
G5 (Glass)
P7 (Plastics)
Accuracy:
Spectral Response Temperature Range:
8 to 14 µm
-18 to 500°C (0 to 1000°F)
8 to 14 µm
0 to 500°C (32 to 932°F)
200 to 1000°C (400 to 1800°F)
3.9 µm
2.2 µm
500 to 2000°C (950 to 3600°F)
5.0 µm
250 to 1650°C (500 to 3000°F)
7.9 µm
10 to 360°C (50 to 650°F)
±1% of measured value or ±1.4°C (2.5°F),
whichever is greater, @23°C ±5°C (73°F ±9°F)
Repeatability:
±0.5% of measured value or ±0.7°C (1.2°F),
whichever is greater
Temperature Resolution: 0.1°C (0.2°F) for all models except LT;
0.1°C (0.2°F) LT only
Response Time (95%): 165 mSec (100 mSec for HT models)
Emissivity:
Adjustable; 0.10 to 1.00 for all models
Signal Processing
(smart models):
°C/°F, Advanced Peak/Valley Hold, Averaging,
Ambient temperature compensation
Electrical Specifications:
Outputs:
Analog
4-20mA (all models), max, loop resistance
700Ω @ 24VDC
Digital (Smart models) Hart® or RS-232 (with optional adapter)
Alarm (Smart models) 24V/150 mA; adjustable setpoints, deadband,
normally open/closed settings
Power Supply:
12-24VDC ±20% (Basic models)
4-20 mA loop power for Basic and Smart models
General Specifications:
Environmental Rating:
Ambient Temp. Range:
With air cooling
With water cooling
With ThermoJacket™
Storage Temperature:
Relative Humidity:
Shock:
Vibration:
Dimensions:
With cooling jacket:
Weight:
With cooling jacket:
174
NEMA-4 (IP 65)
0 to 70°C (32 to 160°F)
up to 120°C (up to 250°F)
up to 175°C (up to 350°F)
up to 315°C (up to 600°F)
-18 to 85°C (0 to 185°F)
10 to 95%, non-condensing
IEC 68-2-27 (MIL STD 810D)
50 g's, 11 mSec, any axis
IEC 68-2-27 (MIL STD 810D)
3 g's, any axis, 11-200 Hz
187 mm L x 42 mm diam.
(7.4 in L x 1.7 in diam.)
187 mm L x 60 mm diam.
(7.4 in L x 2.4 in diam.)
330 g (0.72 lbs)
595 g (1.3 lbs)
Features:
•
•
•
•
•
•
•
•
•
•
Simple, two-wire installation
Simultaneous 4-20 mA and digital output for smart TX sensors
Compact, rugged sensor with NEMA-4 (IP 65) rating
Wide temperature range from -18 to 2000°C (0 to 3600°F)
Advanced signal processing
Point-to-point or multidrop installation
Install up to 15 sensors on a single multidrop network
Windows software for remote configuration and monitoring
Wide choice of focus distances
Special models for glass and plastics applications
Remote Communications Kit
Required for Smart Models, the kit includes the HART® protocol/RS232 adapter and the Windows Data Temp TX software package. One
kit serves multiple sensors. Requires RS-232 serial port voltage and
Windows 95, Windows 98, or Windows NT.
Accessories/Options*
•
•
•
•
•
•
•
•
•
Sighting viewer
NIST/DKD calibration certificate*
Intrinsic safety* (call for specifications)
Optional air-/water-cooled housing*
°C/°F (must be specified for basic models)*
Air purge collar
Lens protector
Right angle mirror
ThermoJacket enclosure
*Must be specified at time of order
Model
RAYTXSLTSF
RAYTXSLTPSF
RAYTXSLTCF1
RAYTXSLTCF2
M2193E
Description
8 to 14 µm, -18 to 500°C, 33:1 Optics
8 to 14 µm,0 to 500°C , 15:1 OPtics
8 to 14 µm, -18 to 500°C, Close Focus 1
(not available for G5, P7 models)
8 to 14 µm, -18 to 500°C, Close Focus 2
(not available for G5, P7 models)
Price
$1590.00
$1345.00
$1590.00
$1590.00
INFRARED TEMPERATURE SENSORS
Need a compact, low cost sensor, but can't afford to sacrifice repeatability? The CI is for
you. Choose J or K thermocouple output - or voltage output if you application is susceptible to noise or requires a long cable run.
Rugged and reliable
Designed for easy integration into standard 4 wire systems, the CI's onboard electronics
are protected by a rugged NEMA-4 stainless steel housing. Compare this to the plastic
housings used on other small IR sensors.
Thermal shock and temperature coefficient specifications are also outstanding for a sensor this small. And the 5:1 optics, 300 mSec response time, and ±1% repeatability all
help assure fast, accurate measurements.
Offset errors eliminated
Because the CI has the same 50 ohm output impedance as a thermocouple, if functions
accurately - without offset errors - when used in conjunction with the thermocouple
break protection circuitry in most controllers, displays, and transmitters.
Wide selection of accessories
A variety of mounting and protective accessories make installation easy easy and help
assure reliable operation in high ambient temperatures and demanding industrial environments.
Compact. Easy to install. And accurate. All reasons the Thermalert CI is ideal for both
OEM and end-user applications. You won't find a better value in a low cost IR sensor
*Each sensing head comes with a .9m (3 ft) cable, two mounting nuts, and an operator's
manual.
Model
Description
Price
RAYCI1A
J-Type Thermocouple Sensor
RAYCI2A
K-Type Thermocouple Sensor
RAYCI3A
10mV/°C Linear Voltage Sensor
Options: (*Must be specified at time of order)
XXXCIACCB50H
High Temp. Extension Cable (260°C/500°F), 15m (50 ft)
XXXCIACCB100H High Temp. Extension Cable (260°C/500°F), 30m (100 ft)
Accessories:
XXXCIACFB
Fixed Mounting Bracket
XXXCIACRA
Right Angle Mirror
XXXCIACAP
Air Purge Collar
XXXCI1CON
Thermocouple Cable Extension Connector Kit for CI1
XXXCI2CON
Thermocouple Cable Extension Connector Kit for CI2
M2194E
$325.00
$325.00
$325.00
$185.00
$370.00
Specifications:
GENERAL
Repeatability:
Resolution (temp):
Response Time:
Resolution (optical):
Spectral Response:
Emissivity:
Outputs:
±1% of reading
<0.5°C (1°F)
450mSec (95% response)
5:1 @ 90% energy
7 - 18 mm
Fixed at 0.95
J or K thermocouple
at 10mV/°C linear voltage
Power:
12 - 24 VDC @ 20 mA
Output Impedance: 50 Ω
Min. Impedance:
50 KΩ
Max. Current Draw: ≤5 mA
Ripple:
≤2.5%
MECHANICAL
Construction:
Stainless steel housing
Dimensions:
19 mm dia x 87 mm L
(0.75 in dia x 3.4 in L)
Weight:
130 g (4.5 oz.)
ENVIRONMENTAL
Environmental Rating:IP 65, NEMA 4
Ambient Temp.:
0 to 70°C (32 to 160°F)
With air cooling:** 0 to 175°C (32 to 350°F)
With water cooling:** 0 to 260°C (32 to 500°F)
Storage Temp.:
-30 to 85°C (-22 to 185°F)
Relative Humidity: 10 to 95%
non-condensing
$50.00
$140.00
$280.00
$50.00
$50.00
175
DIGITAL THERMOMETER
Features Model ST-9610B:
Features Model ST-9610BDELUXE:
• 3 1/2 digit, compact-sized digital
thermometer designed to accept
external K-type thermocouples
• Temperature indication follows
NBS and IEC 584 temperature/
voltage tables for Type K thermo
couples
• Rugged design for field use includes rubber holster
• Accurate to 0.3%
• °C/°F switchable
• Front panel offset adjustment to
optimize accuracy
• Large easy-to-read LCD displays
Maximum reading plus Data
Hold
• Includes 9V battery, holster with
stand and wrist strap
• Thermocouple probe extra, see
p.180 for options
• Thermometer Kit includes: Model ST-9610B single input digital
thermometer with LS-103 Air Probe, LS-109 Surface Probe and
LS-107 General Purpose Probe in a hard carrying case
Specifications Model ST-9610B:
Temperature Range:
Resolution:
Accuracy:
Response Time:
Operating Conditions:
Display:
Power Supply:
Dimensions:
Weight:
-58 to 2000°F (-50 to 1300°C)
0.1°F/0.1°C or 1°F/1°C
±(0.5% rdg + 2°F) or ±(0.3% rdg. +1°C)
2 seconds
32 to 122°F (0 to 50°C), 0 to 99% RH
0.5", 3-1/2 digit LCD
1 x 9V alkaline battery
147 x 70 x 39mm
210g
Model
Description
ST-9610B
Type K Thermocouple Thermometer
ST-9610BDELUXE Thermocouple Thermometer Kit
Price
$135.00
$395.00
DIGITAL THERMOMETER
Features:
• High accuracy of ±1°F over most temperature ranges for food measurement
• 2-second response time
• Waterproof housing assures safe use in
high humidity environments
• Impact resistant construction offers
rugged, long-lasting durability that will
withstand 6-foot drops
• Advanced micro-processor technology
for exceptional precision and userfriendly operation
• 5-minute auto shut-off function
• °F/°C selectable function
• Compact, lightweight design with wraparound cord storage improves user
convenience
• Versatile belt clip also secures probe to
meter for one-hand operation
Specifications:
Temperature Range:
Resolution:
Probe Cord Length:
-40 to 500°F (-40 to 260°C)
0.1°F ≤ 199.9°F, 1°F > 199.9°F
0.1°C ≤ 99.9°C, 1°C > 99.9°C
±1°F (±0.5°C) rdg. from 0 to 270°F,
±3°F above or below range
2 seconds
32 to 122°F (0 to 50°C), 0 to 99% RH
0.5", 3-1/2 digit LCD
9V alkaline battery
6-7/8 x 2-3/8 x 1-1/8"
ø0.126" w/ ø0.062" stepped tip, 3.75"L
6.1"L w/ handle
Approx. 32 to 35"
Model
Description
Accuracy:
Response Time:
Operating Conditions:
Display:
Power Supply:
Dimensions:
Probe Dimensions:
9405
176
M1714E
Waterproof Thermocouple Thermometer
Price
$308.00
DIGITAL THERMOMETER
Features:
Specifications:
• Compact single input thermocouple
thermometer designed for field use
• Accuracy to 0.5%
• Display maximum reading plus Data
Hold
• Large LCD display with backlight
• User selectable °C or °F
• User selectable 0.1°C or 1°C (0.1°F or
1°F) resolution
• Accept K-type thermocouples
• Includes 9V battery and holster
• Thermocouple probe extra, see
p.180 for options
Temperature Range:
Resolution:
Accuracy:
Power Supply:
Dimensions:
Weight:
Model
ST-610B
-58 to 2000°F (-50 to 1300°C)
0.1°F/0.1°C or 1°F/1°C
±(0.5% rdg ±1°C/ 2°F)
1 x 9V alkaline battery
165 x 76 x 73mm
403g
Description
Thermocouple Thermometer
Price
$167.00
DIGITAL THERMOMETER
Features:
Specifications:
• Dual input thermocouple thermometer
provides differential temperature
measurements
• Differential Temperature (T1-T2) mode
freezes display
• Scan Function (T1, T2, T1-T2, Max...)
• Direct or differential measurements to
0.1°C/ 0.1°F resolution
• Accuracy to 0.5%
• Display maximum reading plus Data
Hold
• Large LCD display with backlight
• User selectable °C or °F
• Accept K-type thermocouples
• Includes 9V battery and holster
• Thermocouple probe extra, see p.180
Temperature Range:
Resolution:
Accuracy:
Power Supply:
Dimensions:
Weight:
-58 to 2000°F (-50 to 1300°C)
0.1°F/0.1°C or 1°F/1°C
±(0.5% rdg ±1°C/ 2°F)
1 x 9V alkaline battery
165 x 76 x 73mm
403g
Model
Description
ST-612
Differential Thermocouple Thermometer
Price
$199.00
DIGITAL THERMOMETER
Features:
• A digital thermo-hygrometer with remote or integral probe
• Measures air temperature and temperature from
thermocouple, as well as humidity
• Fast sampling time
• °C/°F switchable
• Dual, easy-to-read backlit LCD display
• Data hold and Max hold
• Auto power off
• Includes K-type thermocouple probe,
humidity probe and 9V
battery
Specifications:
Temperature Range:
Resolution:
Accuracy:
Humidity Range:
Resolution:
Accuracy:
Power Supply:
Dimensions:
Weight:
M1715E
-4 to 1832°F (-20 to 1000°C)
0.1° up to 200°; 1° over 200°
±(2.0% rdg ±2°C/4°F)
0 to 100% RH
0.1% RH
±3.5%
1 x 9V alkaline battery
150 x 72 x 35mm
210g
Model
Description
ST-615
Thermocouple Thermometer/Hygrometer
Price
$195.00
177
DIGITAL THERMOMETERS
Features 50 Series II:
54 Series II
• Supports a wide range of thermocouple types
• Measurement range from -250 to 1767°C (-418 to 3212°F)
depending upon thermocouple type
• Temperatures displayed in °C, °F, or Kelvin (K)
• Display resolution of 0.1° below 1000° and 1° above 1000°
• Laboratory accuracy of ±(0.05% + 0.3°C/0.5°F)
• MIN, MAX, and AVG – with time references – captures major
events
• Electronic Offset function maximizes overall accuracy by
allowing you to compensate for thermocouple errors
• Large, backlit, dual display presents all the information you
need at a glance
• Splash and dust resistant case design
• Holster enhances ruggedness
• Thermometers tested to withstand a one-meter drop
• User-friendly front panel that’s easy to set-up and operate
• Sleep mode to increase battery life (typical 1000-hour life)
• Battery door allows easy battery replacement without breaking
the calibration seal
• Complete with 80PK-1 bead thermocouple(s), batteries, manual, and instructional guide on CD-ROM
• Dimensions/Weight: 173 x 86 x 38mm (6.8 x 3.4 x 1.5”)/ 400g
(14oz)
53 Series II
Data Logging Capabilities:
The Fluke 53 and 54 Series II can log up to 500 points of data to
internal memory.
• User-adjustable recording intervals
• Real-time clock captures the exact time of day of events
• Recall function allows logged data to be easily reviewed on
the meter display
FlukeView® Forms Software:
• In-depth analysis with records, charts,
and graphs
• Standard and customizable forms
• Export data to other measurement
analysis programs
• Infrared interface between thermometer
and PC
• Optional IR adapter and cable for PCs
without an IR port
Model
52 Series II
51 Series II
Model
Thermocouple Types
Number of Inputs
Time Stamp
Rugged Design w/ Holster
Splash / Dust Resistant
Dual Display w/ Backlight
MIN / MAX / AVG Recording w/ Time Stamp
Compatible with optional Toolpak™
Differential (T1-T2) Readout
Data Logging Up to 500 Points
IR Data Port for Interface to PC
Price
178
Description
FVF-SC1
54-2
K, J, T, E, N, R, S
Dual
Time of Day
•
•
•
•
•
•
•
•
$463.00
M1718E
FlukeView Forms Software
53-2
K, J, T, E, N, R, S
Single
Time of Day
•
•
•
•
•
•
•
$386.00
®
Price
$108.00
52-2
K, J, T, E
Dual
Relative Time
•
•
•
•
•
•
51-2
K, J, T, E
Single
Relative Time
•
•
•
•
•
$339.00
$262.00
ENVIRONMENTAL METER
Features:
• This 5-in-1 multi-tester combines the functions of a sound level
meter, light meter, humidity meter, thermometer and multimeter
• Light to 20,000 Lux
• Sound to 100 dB
• Humidity to 95% RH
• Temperature Range to 2350°F/1300°C
• Multimeter Ranges (see below)
• Included accessories: Rubber holster, 9V battery, test leads
and temperature probe
Specifications:
Light Range:
Resolution:
Sound Level Range:
Resolution:
Humidity Range:
Resolution:
Temperature Range:
DC Current Range:
DC Voltage Range:
AC Voltage Range:
Resistance Range:
Resolution:
Display:
Dimensions:
Weight:
20,000 Lux
0.1 Lux
100 dB
0.1 dB
95% RH
0.1% RH
2350°F/1300°C
10A
600V
600V
2MΩ
0.1Ω
2000-count LCD
4.75 x 2.3 x 16”/121 x 60 x 40 mm
9.88 oz/280 g
Model
Description
ST-21
Environmental Meter
Price
$108.00
ENVIRONMENTAL METER
Features:
• Combines the functions of a sound level meter, light meter,
humidity meter and thermometer into one compact unit
• Light to 20,000 Lux
• Sound to 100 dB
• Humidity to 95% RH
• Temperature Range to 2350°F/1300°C
• Auto shut off & low battery indication
• Included accessories: Rubber holster, 9V battery and K-type
temperature probe
Specifications:
Light Range:
Resolution:
Sound Level Range:
Resolution:
Humidity Range:
Resolution:
Temperature Range:
Display:
Dimensions:
Weight:
20,000 Lux
0.1 Lux
100 dB
0.1 dB
95% RH
0.1% RH
2350°F/1300°C
2000-count LCD
4.75 x 2.3 x 16”/121 x 60 x 40 mm
9.88 oz/280 g
Model
Description
ST-22
Environmental Meter
M1716E
Price
$115.00
179
THERMOCOUPLE PROBES
Model LS-109
Surface Probe
Ribbon-style surface probe.
Maximum Temperature: 400°C
LS-109
Model LS-139
Surface Probe
LS-139
Spring loaded probe is ideal for high temperature surface measuring requirements.
Extremely fast response time. Not recommended for use as an immersion probe.
Maximum Temperature: 500°C
Model LS-104
Right Angle Surface Probe
Unique right angle design allows temperature of hard to reach areas to be taken.
Great for monitoring temperature inside
pipes, also flat surfaces, without keeping
hands over heated area.
Maximum Temperature: 400°C
LS-104
Model LS-103
Air/Gas Probe
LS-103
Specially designed to measure air or
gases in heating and cooling units, ovens
and engine exhausts. Perforated shield
permits fasts response while providing
exceptional element protection.
Maximum Temperature: 800°C
LS-134A
Model LS-134A
Needle Tip Probe
Medium gauge hypodermic needle tip,
used to measure softer food stuffs,
rubbers and solids. Ideal for use in
industrial, laboratory and chemical
environments.
Maximum Temperature: 800°C
LS-107
Model LS-107
General Purpose Probe
Used to measure both air or liquids, but is
best recommended for immersion applications: Excellent for checking temperature
of oils, water and non-corrosive fluids.
Maximum Temperature: 700°C
180
Model
LS-109
LS-139
LS-104
LS-103
LS-134A
LS-107
Description
Surface Probe, Max. Temp.: 400°C
Surface Probe, Max. Temp.: 500°C
Right Angle Surface Probe, Max. Temp.: 400°C
Air/Gas Probe, Max. Temp.: 800°C
Needle Tip Probe, Max. Temp.: 800°C
General Purpose Probe.: 700°C
M2357E
Price
$78.00
$88.00
$98.00
$88.00
$78.00
$78.00
THERMOCOUPLE PROBES
80PK1 & 80PJ1 Bead Probes
This basic, inexpensive thermocouple offers
good accuracy and fast response.
(Not suitable for liquid immersion.)
• 80PK1 is compatible with
K-type thermometers; 80PJ1 works
with J-Type thermometers
• Measurement range:
-40 to 260° C (-40 to 500° F)
80PK2A Immersion Probe
Use as a general-purpose
probe including liquids and gels.
• Compatible with K-Type temperature
measuring instruments
• Measurement range:
-40 to 982° C (-40 to 1800° F)
80PK3A Surface Probe
Designed for measuring the temperature
of flat or slightly convex surfaces, this
K type probe is ideal for hot rollers and
plates.
• Exposed junction allows direct contact
with the surface being measured
• Measurement range:
0 to 260° C (32 to 500° F)
80PK8 Pipe Clamp Temperature Probe
Designed for pipe surfaces from 6.4 mm
(1/4") diameter to 34.9 mm
(1-3/8") diameter.
• Spring-action jaw will
not loosen over time, ensuring
repeatable measurements
• Robust design for extended service life
• Measurement range:
-29° C to 149°C (-20° F to 300° F)
• Repeatability: 0.56° C (1° F)
80T-150U Universal Temperature Probe
For highly accurate measurement of air,
surface, and non-corrosive materials.
• Measurement range:
-50° C to 150˚C (-58˚F to 302˚F)
• Output: 1mV/°C or 1mV/°F
(switch selectable)
80TK Thermocouple Module
80PK4A Air Probe
For air and non-caustic gas applications.
• Probe constructed of 304SS
with a perforated baffle around
the measurement bead
• Measurement range:
-40 to 816˚C (-40 to 1500 °F)
Converts multimeters with a mV range into
digital thermometers.
• Converts K-type thermocouple signals
into mV output.
• Connects to DMM via standard bannana
plugs
• Switch selectable °C or °F
• Range: -50° C to 1000° C (-58 to 1832° F)
80PK5A & 80PT5A Piercing Probe
80BK Integrated DMM Temperature Probe
Designed for foods, liquids and gels.
• Probe made of 304 stainless steel
• 80PK5A is compatible with K-Type
instruments; 80PT5A is designed
for use with T-Type thermometers
• Measurement range:
-40 to 260° C (-40 to 500° F)
Compatible with the Fluke 16 and
Fluke 89 Series IV and other DMMs
with temperature measurement functions.
• K-type thermocouple with standard
banana jack
• Convenient one-piece construction
• Measurement range:
-40 to 260° C (-40 to 500˚F)
80PK6A Exposed Probe
Model
Use both as a surface probe and
for insertion into air and non-corrosive
gases.
• Probe made of 304SS
• Measurement range:
-40 to 816° C (-40 to 1500° F)
80PK-1
80PJ-1
80PK-2A
80PK-3A
80PK-4A
80PK-5A
80PT-5A
80PK-6A
80PK-7
80PK-8
80T-150U
80TK
80BK
80PK7 Industrial Surface Probe
For flat or slightly curved surfaces.
• Exposed junction allows direct
contact with the surface being measured
• Robust design for extended service life
• Measurement range:
-127 to 600° C (-196° F to 1112° F)
M2358E
Description
Type "K" Bead Probe
Type"J" Bead Probe
Immersion Probe
Surface Probe
Air Probe
Type "K" Piercing Probe
Type "T" Piercing Probe
Exposed Probe
Industrial Surface Probe
Pipe Clamp Temperature Probe
Universal Temperature Probe
Thermocouple Module
Integrated DMM Temperature Probe
Price
$24.00
$21.00
$86.00
$142.00
$111.00
$104.00
$104.00
$111.00
$317.00
$166.00
$197.00
$118.00
$32.00
181
THERMOCOUPLE PROBES
EM10 General Purpose Surface Probe
EM17 Penetration Probe
Ideal for temperature measurement of motors, engines, and pumps.
Maximum Temperature: 500°C. Accuracy: ±0.2% of reading.
Measures most general purpose measurements of internal
temperatures such as soft and semi-solid materials.
Maximum Temperature: 500°C. Accuracy: ±0.3% of reading.
EM11 Right Angle Surface Probe
EM18 Heavy Duty
Penetration Probe
Maximum Temperature: 500°C. Accuracy: ±0.2% of reading.
A replaceable needle type sensor
for rugged materials like frozen
meats, tires, rubber, etc.
Max. Temperature: 300°C.
Accuracy: ±0.3% of reading.
EM12 Microsensing Surface Probe
EM20 Melting Metal Surface Probe
Ideal for measuring very small surfaces like transistors, IC, transformers and electronic components.
Maximum Temperature: 400°C. Accuracy: ±0.3% of reading.
EM13 Moving Surface Probe
No junction thermocouple is needed for the measurement of
melting metal surfaces. Ideal for molten solder and other electric
conductive molten materials.
Maximum Temperature: 700°C. Accuracy: ±0.5% of reading.
EM21 High Temperature Surface Probe
For measuring the temperature of moving or stationary smooth or
flat surfaces. Maximum surface speed of 800 m/min.
Maximum Temperature: 250°C. Accuracy: ±0.3% of reading.
EM14 Roller Bearing Moving
Surface Probe
EM22 Underwater Probe
Four roller bearings supply suitable contact with surface. Moving
surface speed should not exceed 500 m/min.
Maximum Temperature: 200°C. Accuracy: ±0.3% of reading.
Model
Description
EM10
EM11
EM12
EM13
EM14
General Purpose Surface Probe
Right Angle Surface Probe
Microsensing Surface Probe
Moving Surface Probe
Roller Bearing Moving Surface Probe
182
Long reach handle for measuring temperatures of 500° to 800°C.
Ideal for boilers, incinerators, furnaces, etc.
Maximum Temperature: 800°C. Accuracy: ±0.3% of reading.
Strong lead cable allows this probe to be thrown into sea,
bath and tanks.
Maximum Temperature: 300°C. Accuracy: ±0.3% of reading.
Price
Model
Description
$361.00
$408.00
$319.00
$465.00
$558.00
EM17
EM18
EM20
EM21
EM22
Penetration Probe
Heavy Duty Penetration Probe
Melting Metal Surface Probe
High Temperature Surface Probe
Underwater Probe
M630E
Price
$223.00
$552.00
$205.00
$542.00
$532.00
THERMOCOUPLE WIRE
Model
KX20PP-1
KX20PP-50
KX20PP-100
KX20PP-200
KX20PP-500
K20GG-1
K20GG-50
K20GG-100
K20GG-200
K20GG-500
JX20PP
JX20PP-50
JX20PP-100
JX20PP-200
JX20PP-500
J20GG
J20GG-50
J20GG-100
J20GG-200
J20GG-500
Features:
•
•
•
•
•
Types J and K
Insulated solid wire, 20 gauge
Available by the foot or in 50', 100', 200' and 500' rolls
Available with PVC or fiberglass insulation
PVC is highly flexible, whereas fiberglass is chemical and
flame-resistant
• Temperature limit of PVC: 105°C/221°F
• Temperature limit of fiberglass: 482°C/ 900°F
Description
Type K T/C Wire w/ PVC, 1 foot
Type K T/C Wire w/ PVC, 50 feet
Type K T/C Wire w/ PVC, 100 feet
Type K T/C Wire w/ PVC, 200 feet
Type K T/C Wire w/ PVC, 500 feet
Type K T/C Wire w/ Fiberglass, 1 foot
Type K T/C Wire w/ Fiberglass, 50 feet
Type K T/C Wire w/ Fiberglass, 100 feet
Type K T/C Wire w/ Fiberglass, 200 feet
Type K T/C Wire w/ Fiberglass, 500 feet
Type J T/C Wire w/ PVC, 1 foot
Type J T/C Wire w/ PVC, 50 feet
Type J T/C Wire w/ PVC, 100 feet
Type J T/C Wire w/ PVC, 200 feet
Type J T/C Wire w/ PVC, 500 feet
Type J T/C Wire w/ Fiberglass, 1 foot
Type J T/C Wire w/ Fiberglass, 50 feet
Type J T/C Wire w/ Fiberglass, 100 feet
Type J T/C Wire w/ Fiberglass, 200 feet
Type J T/C Wire w/ Fiberglass, 500 feet
Price
$1.00
$28.00
$55.00
$110.00
$275.00
$2.00
$80.00
$110.00
$200.00
$350.00
$1.00
$32.00
$55.00
$110.00
$275.00
$2.00
$75.00
$100.00
$159.00
$350.00
THERMOCOUPLE CONNECTORS
Features:
•
•
•
•
•
•
Glass filled nylon
Heavy duty construction
Rated to 425°F
Type K connector uses Chromel-Alumel alloy in a yellow shell
Type J connector uses Iron-Constantin alloy in a black shell
Model AD-1 converts a type K probe with a mini connector to
standard 3/4” banana jacks
Model
Model AD-1
LS-181
LS-182
SMP-J-M
SMP-J-F
AD-1
Description
Male Connector, K-type
Female Connector, K-type
Male Connector, J-type
Female Connector, J-type
Thermocouple Adapter
Price
$5.00
$6.00
$7.00
$7.00
$12.00
CARRYING CASES
Features:
• Protect and store your thermometers and accessories in a soft,
fabric carrying case
• Model CA-03: Dimensions: 8 x 4.75 x 2.5” (205 x 120 x 64mm)
• Model CA-05A: Dimensions: 8 x 5.25 x 2.5” (205 x 130 x 65mm)
• Model CA-52A: Dimensions: 8 x 3.5 x 2.25” (205 x 90 x 57mm)
Model
CA-03
CA-05A
CA-52A
M1717E
Description
Soft Carrying Case
Soft Carrying Case
Soft Carrying Case
Price
$18.00
$21.00
$15.00
183
TEMPERATURE SENSORS
M01 Probe Assembly with Thermal Head
Standard Specifications:
•
•
•
•
•
•
Mineral insulated 316SS insertion sheath
Ungrounded junction (T/C)
Connection head with ceramic terminal block
316SS 1/2" NPT process connection
RTD sensor: Pt100 3-wire 385 Class "A"
Maximum Temp.: R2: 200°C, R5: 500°C,
Thermocouple: 900°C
Sensor Type
R2 RTD Max. 200°C
R5 RTD Max. 500°C
K
K Thermocouple
J
J Thermocouple
Insertion
(L = INCH)
F
S
G
I
X
F
Sheath Diameter
B 1/8"
C 3/16"
D 1/4"
E
3/8"
M01-
Probe Mounting
Fixed
Spring-loaded
(for thermowell)
Connection Head
Cast Aluminum
Cast Iron
Explosion Proof
FDA Polypropylene
0
Options
Grounded Therocouple Junction
Air Exposed Sensor
Inconel 600 T/C Sheath (Max. 1200°C)
4-Wire RTD
Dual Sensor
Head Mount Transmitter
(Specify Temp. Range)
-T2 ( )
Head Mount Isolated Transmitter
(Specify Temp. Range)
-WS
316SS Thermowell (3/4" NPT)
-WB
Brass Thermowell (3/4" NPT)
-C
Ceramic Protection Tube (3/4" NPT)
-F
Duct Mounting Flange
-U ( )
Union Fitting W/Nipple Extension
(specify nipple length in inches)
*Specify other options if required
-G
-E
-HT
-4W
-D
-T1( )
TEMPERATURE SENSORS
M02 Probe Assembly with Extension Lead
Standard Specifications:
•
•
•
•
•
Mineral insulated 316SS insertion sheath
Grounded junction (T/C)
316SS transition fitting
RTD sensor: Pt100 3-wire 385 Class "A"
Maximum Temp.: R2: 200°C, R5: 500°C, Thermocouple: 900°C
Sensor Type
R2-RTD Max. 200°C
R5-RTD Max. 500°C
K-K Thermocouple
J-J Thermocouple
Sheath Diameter
A 1/16"
B 1/8"
C 3/16"
D 1/4"
E
3/8"
M02184
Insertion
(L1 = INCH)
Lead Insulation
P
PVC
T
Teflon
G Glass Fibre
C Coiled Cord
Lead
(L2 = INCH)
N
P
J
U
A
L
Termination
Bare Leads
Mini Plug
Mini Jack
Std Plug
Std Jack
Spade Lugs
0
M2348E
Options
316SS Flexible Armour over Lead
Ungrounded Thermocouple Junction
Air Exposed Sensor
Inconel 600 T/C Sheath (Max. 1200°C)
4-Wire RTD
Dual Sensor
DIN Rail Transmitter (Specify Temp. Range)
DIN Rail Isolated Transmitter
(Specify Temp. Range)
316SS Compression Fitting:
1/2" NPT
-C2
-C4
1/4" NPT
-C8
1/8" NPT
-Y
Bayonet Connector w/Adapter (1/8" NPT)
-F
Duct Mounting Flange
*Specify other options if required
-A
-U
-E
-HT
-4W
-D
-T1( )
-T2( )
THERMOCOUPLES, RTD'S, TRANSMITTERS
Industrial Thermocouple Elements,
Protection Tubes and Assemblies
Pyromation offers a large variety of thermocouple components
and assemblies for use in virtually all high temperature heavy
industrial process applications. These components and
assemblies find use in heat treating, forging, smelting and
melting, utility and waste boilers, incineration and cogeneration
and many other severe use processes. Inquiries are invited
for standard components and assembly styles, as well as
for special materials and constructions for use in difficult
process applications.
Magnesium Oxide Insulated Thermocouple
Assemblies
Pyromation offers a large variety of Magnesium Oxide insulated
thermocouple, commonly referred to as MgO thermocouples.
They are used in a variety of process and laboratory applications
as their many desirable characteristics make them a good choice
for general and special purpose use. They are available in all
thermocouple element types, numerous sheath diameters and
materials. Their ruggedness and moderately high temperature
characteristics make these thermocouples a popular choice for
a multitude of temperature measuring applications.
Temperature Sensors for the Plastics,
Rubber and Packaging Industries
Pyromation offers temperature sensors for the plastics, rubber
and packaging industries in standard and custom designs. These
temperature sensors are provided with either thermocouple
or RTD measuring elements and are typically supplied with
fiberglass leads inside 304 stainless steel sheaths. All
thermocouple and platinum RTD element assemblies are
temperature rated up to 482° C (900°F) except type T
thermocouples, which are rated up to 371° C (700° F). All
other RTD assemblies are rated up to 204° C (400° F).
Special construction assemblies are available upon request.
Transmitters, Selector Switches and
Digital Panel Meters
Pyromation's instrumentation for temperature sensors and other
process sensing devices allows you to select and transmit
process variable signals, indicate process variable conditions,
and provide process condition alarms when desired.
General Purpose RTD's
Pyromation's general purpose RTD temperature sensor
assemblies find use in a multitude of process and HVAC
applications. Assemblies are offered with a choice of element
materials, values and accuracies, a choice of element leadwire
configurations, and a choice of sheath materials and diameters.
Many assemblies are supplied in drilled or flanged wells, and all
assemblies can be supplied with Pyromation's low cost integral
head mounted RTD transmitter.
CIP Sanitary Connecting RTD's
Pyromation's general purpose CIP sanitary connector
RTD temperature sensors are used in food, dairy, beverage,
pharmaceutical and chemical processing applications where
sensor corrosion and product contamination are critical factors.
These sensors meet or exceed finish specifications set forth by
the 3A Sanitary Council Standard #09-08.
Model
J49U-012-00-6HN31
K49U-012-00-6HN31
K39G-15-25-24-36-0
R1T185L483-012-00-6HN31
R1T185L483-03-CIP-2-5-63
401-85U-1750C
401-85U-1950F
J20-5-510
K20-5-510
M1543E
Description
Type 'J' T/C Assembly,
12" alum. head
Type 'K' T/C Assembly,
12" alum. head
Type 'K' T/C Assembly,
24" unitized cerrite
100Ω, 3-wire RTD Assembly,
12" alum. head
100Ω, 3-wire Sanitary RTD
Assembly, tri-clamp conn.
RTD Transmitter, 4-20mA,
0-100°C
RTD Transmitter, 4-20mA,
0-500°F
Type 'J' T/C Ext. Wire,
20AWG, PVC insulated
Type 'K' T/C Ext. Wire,
20AWG, PVC insulated
Price
$75.00
$75.00
$68.00
$122.00
$168.00
$160.00
$160.00
$0.40
$0.57
185
REFERENCE THERMOMETERS
The 5577 is an intrinsically safe, reference-grade thermometer,
that combines an ATEX IS rating with a high accuracy of
±0.05°C, over the entire range of -100 to 135°C, for the readout
and probe together.
The 5577 uses Pt100 probes and a calibration procedure that
uses system calibration data to marry the probe and the readout,
which ensures high accuracy measurements across a complete
temperature range. System calibrations are NIST-traceable and
NVLAP-accredited.
The 5577 can be used with one or two probes and will display
both measurement channels simultaneously along with their
difference, making it a perfect tool for checking temperature
gradients. Several probe designs are available depending on
what process you are measuring.
Since the 5577 is battery powered, the thermometer is lightweight and extremely portable - perfect for measurements in
those hard-to-reach places out on the pipeline. A standard 9V "D"
cell powers the thermometer for up to 20 hours.
Features:
Specifications:
•
•
•
•
Temperature Range:
System Accuracy:
Drift:
Resolution:
Sensor Type:
IS Rating:
Certified to ATEX directive - EX II 2G EEx ib T4 rating
System accuracy to ±0.05°C
Dual channel with differential measurements
Battery powered
CENELEC IS MARKINGS
EX
II
2G
EEx
ib
IIB
T4
186
EC Examination Mark
ATEX Gas Groups - Group II for gases in nonmining industries
ATEX Zones - 2G identifies zones in which an explosive gas/air mixture is likely to be present
European mark for Explosion protected
Explosion Protection Type and Zones - ib indicates
intrinsic safety in zones in which an explosive gas/air
mixture is at least likely to be present
Explosive Gas Groups - IIB is for atmospheres
containing ethylene or gases of an equivalent hazard
Temperature Classification - T4 has an upper
temperature limit to 135°C
Communications:
Display:
Power Supply:
Dimensions:
Weight:
Model
-100 to 135°C
±0.05°C
±0.05°C/year
0.01°C
Pt100, 4-wire, DIN 385 Alpha
EX II 2G EEx IIB T4 rating; certified by
CENELEC to European ATEX directive
RS-232
2-line LCD
9V IS-rated battery
8 x 3.5 x 1.5" (200 x 85 x 40mm)
0.7 lb (0.3 kg)
Description
Price
Intrinsically-safe Reference Thermometer $2,344.00
5577
5315-001
Immersion Probe, 150 x 3mm
$444.00
5315-002
Immersion Probe, 300 x 3mm
$444.00
5315-003
Immersion Probe, 300 x 6mm
$444.00
5315-005
Spare IS-approved Battery
$36.00
9326
Carrying Case (fits 5577 & 2-300mm probes) $307.00
M1578E
PRECISION THERMOMETERS
Features:
• Read both Pt-25 and Pt-100 RTDs as well as thermistors
• Read PRTs/RTDs to ±0.025°C and thermistors to ±0.005°C
• INFO-CON connector stores all the critical information about
your probe and automatically recognizes whether you're using
an RTD or thermistor
• Reads multiple curves
• Resolves values to 0.001°C with accuracy maintained
• Min/Max stores lowest and highest readings since last reset
• Hold freezes and stores current reading
• Delta computes the difference between the current reading and
a reference value you choose
• Menu system for convenient access to all functions
• Model 1522 stores multiple data sets totaling 10,000 readings
• Each thermometer comes with rechargeable NiMH batteries,
an AC adpater/charger, and RS-232 cable and a spare INFOCON connector.
Specifications:
The smallest most affordable standards-level thermometers available, with accuracy and functions previously found only on more
expensive bench or lab units. They are ideal for field reference
work in conjunction with a dry block or calibration bath, or for
comparison testing of installed sensors.
These thermometers offer true standards thermometry, reading
25Ω to 100Ω RTDs in three curves and all types of thermistors.
These thermometers also let you select resolution from 0.1° to
0.001° and offer the accuracy to support even 0.001° resolution.
Probes attach through the new INFO-CON connector, which lest
you change probes without reprogramming. INFO-CON stores all
critical information about each probe you use, and downloads the
appropriate calibration constants and conversion type. It also
checks a probe's stored recall date to verify that it has not
expired. When you buy a new Hart probe or have one recalibrated, the probe data is pre-loaded into the INFO-CON memory.
Attach you own probe and easily program the connector right
from the unit.
The 1522 has all of the great features of the 1521, plus the ability
to log up to 10,000 readings. There are two data acquisition
modes, "Auto Logging" and "Demand Logging". In the "Auto
Logging" mode, you can store up to 10,000 measurements at
user-selected intervals, including the value, unit of measure, date
and time of each measurement. The 1522 also stores as many
as 25 data labels so that each set of data can be uniquely
tagged. Demand Logging allows up to 100 individually selected
measurements to be recorded and tagged with one of 25 data
labels.
Sensor Type:
Temp. Range:
Accuracy:
Pt-25 to Pt-100
Thermistor
-200 to 962°C
-50 to 150°C
-200 to 100°C: ±0.025°C 0 to 50°C: ±0.005°C
100 to 400°C: ±0.05°C 50 to 75°C: ±0.01°C
400 to 800°C: ±0.1°C 75 to 100°C: ±0.02°C
800 to 962°C: ±0.15°C
Resolution:
0.1 to 0.001°C
0.1 to 0.001°C
Resistance Range:
0 to 400Ω
0 to 500kΩ
Excitation Current:
0.5mA
5µA
Memory:
Stores 6 readings in
Logs 10,000 rdgs. in
"Hold" mode
"Auto Logging" mode;
Logs 100 rdgs. in "Demand Logging" mode
Measurement Period:
1 second
Digital Filter:
1 to 60-second exponential filter
Probe Connections:
INFO-CON connector
Communications:
RS-232 (1522 includes IR interface)
Display:
6-digit, 7-segment LCD w/ 16 x 1 alphanumeric
Power Supply:
Rechargeable NiMH batteries
(Ac adapter included)
Dimensions:
7.75 x 4.2 x 1.5" (200 x 110 x 40mm)
Weight:
1 lb. (0.4 kg)
M1576E
Model
HT1521-156
HT1522-156
2371
9935-M
9935-S
Description
Price
Precision Thermometer
$1,661.00
Datalogging Precision Thermometer $2,243.00
Spare INFO-CON Connector
$87.00
LogWare Software, Multi-user
$1,173.00
LogWare Software, Single-user
$834.00
187
PRECISION THERMOMETERS
The base unit has the display, control buttons and RS-232 port
built-in. It supplies power, communication management, and software coordination for all of the other modules. Each base unit
can handle eight thermometer modules. Each module stacks
behind the preceding one, and the Stack's software automatically
reconfigures itself to include all of the new functions supplied by
that module. Each module is calibrated individually and stores its
own parameters and calibration information independently, but all
the data is read from the base unit's display.
The SPRT Module 2560 reads 25Ω and 100Ω four-wire RTDs,
PRTs and SPRTs with an accuracy of ±0.005°C. Each module
has two input channels. SPRT modules can be used one at a
time or in any combination for reading up to 16 different reference thermometers.
The High-temp PRT Module 2561 reads 2.5Ω and 0.25Ω fourwire HTPRTs and RTDs. PRT Scanner Module 2562 reads eight
channels of two-, three-, or four-wire 100Ω PRTs or RTDs.
The Precision Thermocouple Module 2565 reads any type of
thermocouple, including type S platinum and gold-platinum thermocouples. This two-channel module has internal reference junction compensation, or you can use an external source for even
greater accuracy. All the standard ANSI thermocouple types are
preprogrammed; however, you can choose a conversion method
and then enter the probe characteristics of your sensor.
The Thermocouple Scanner Module 2566 has 12 channels and
reads K, J, T,S, R, B, E and N thermocouples. Each channel can
be set to read a different type of thermocouple. All temperature
readings are performed in exactly the same manner as with the
2565 module.
Features:
• A high-accuracy reference thermometer, an automated
calibration system, and a data acquisition system in one unit
• Reads PRTs, RTDs, thermistors and thermocouples
• Configure as you like with up to eight thermometry modules
• Provides a resolution of 0.0001°C or better
Base Unit Specifications:
Display:
Input Sequencing:
Sample Time:
Communications:
Memory:
Power Supply:
4.25 x 2.25" LCD, LED backlight w/
adjustable contrast and brightness
1 to 96 channels
2 seconds minimum
RS-232
Channel sequence, probe coefficients
100 to 240VAC, 50/60 Hz nominal
Model
Description
1560-156
9935-M
9935-S
9302
Price
Thermometer Base Unit
$3,739.00
LogWare Software, Multi-user
$1,173.00
LogWare Software, Single-user
$834.00
Carrying Case (holds 1560 & 5 modules) $480.00
Module Specifications:
Model
Input Channels:
RESISTANCE/mV
Range:
Basic Accuracy:
Resolution:
TEMPERATURE
Range:
Basic Accuracy:
±0.1°C
±0.3°C
Resolution:
Price
188
2560
2
2561
2
2562
8
2565
2
2566
12
0 to 400Ω
±20ppm of reading
0.0001Ω
0 to 25Ω
±50ppm of reading
0.00001Ω
0 to 400Ω
±40ppm of reading
0.0001Ω
-10 to 100mV
±0.002mV
0.001mV
-10 to 100mV
±0.004mV
0.001mV
-260 to 962°C
±0.005°C @ 0°C
0 to 1200°C
±0.013°C @ 0°C
-200 to 850°C
±0.01°C @ 0°C
Ext. CJC: ±0.05°C
Ext. CJC
±0.007°C @ 100°C
±0.018°C @ 100°C
±0.014°C @ 100°C
Int. CJC: ±0.1°C
Int. CJC
0.0001°C
$2,495.00
0.001°C
$2,826.00
0.0001°C
$2,999.00
0.001°C
$3,668.00
0.001°C
$2,999.00
M1577E
PRECISION THERMOMETERS
Specifications:
1502A
1504
Nominal RTWP: 25 to 100Ω
Thermistors
RTD, PRT or SPRT
TEMPERATURE
Range:
-200 to 962°C
Any thermistor
(-328 to 1764°F)
range
Accuracy:
±0.004°C @ -100°C
±0.002°C @ 0°C
±0.006°C @ 0°C
±0.002°C @ 25°C
±0.009°C @ 100°C
±0.004°C @ 50°C
±0.012°C @ 200°C
±0.010°C @ 75°C
±0.018°C @ 400°C
±0.020°C @ 100°C
±0.024°C @ 600°C
(Using 10kΩ thermistor sensor, 0.04)
Resolution:
0.001°C
0.0001°C
RESISTANCE
Range:
0 to 400Ω, auto
0 to 1MΩ, auto
Accuracy:
0 to 20Ω: 0.0005Ω
0 to 5kΩ: 0.5Ω
20 to 400Ω: 25ppm
5 to 200kΩ: 100ppm
200kΩ to 1MΩ:
300ppm
Resolution:
0 to 20Ω: 0.0001Ω
0 to 10kΩ: 0.01Ω
20 to 400Ω: 0.001Ω
10 to 100kΩ: 0.1Ω
100kΩ to 1MΩ: 1Ω
GENERAL
Excitation Current: 0.5 & 1mA, user2 & 10µA, autoselectable, 2Hz
selection
Measurement Period:
1 second
Digital Filter:
Exponential, 0 to 60 sec. time constant
(user-selectable)
Probe Connection:
4-wire w/ shield, 5-pin DIN
Communications:
RS-232 serial standard;
IEEE-488 optional
Display:
8-digit, 7-segment yellow-green LED;
0.5" high characters
Power Supply:
115VAC, 50/60Hz, 1A nominal
Dimensions:
5.6 x 7.1 x 2.4" (143 x 181 x 61mm)
Weight:
2.2 lb. (1.0kg)
These precision thermometers fill the gap between ultra-high precision laboratory thermometers, and general purpose hand-held
models. They can be paired with a wide variety of sensors to create a system accurate enough to calibrate process sensors and
liquid in glass thermometers. Unsed in conjunction with one of
our baths or dry block calibrators, they create a complete temperature calibration system.
MODEL
Probe:
Features Model 1502A:
•
•
•
•
•
•
•
•
•
Can be used with either 100Ω or 25Ω Pt sensors
Resolution of 0.001°C across its entire range
Accuracy is up to ±0.004°C
Temperature is displayed in your choice of °F, °C, °K or resistance in ohms
Can read the standard "385" industrial grade RTD with no programming
Programmable to match a probe's constants for maximum
lineqarity and accuracy
All probe constants are easily programmed through the front
panel
RS232 interface
Optional battery pack for completely portable operation
Features Model 1504:
• Thermistor readout
• More sensitive to temperature, faster response time, and come
in many shapes for different applications
• Offers higher accuracy over a limited temperature range
• Typical accuracy is ±0.002°C
• Resolution is 0.0001°C
Model
1502A-156
1504-156
2505
9313-156
2506
2507
2508
9934-S
M1572E
Description
PRT Thermometer
Thermistor Thermometer
Spare DIN connector
Battery Pack
IEEE Communications Option
Mini-Printer
Serial Cable Kit
LogWare Software "Single User"
Price
$2,511.00
$2,511.00
$46.00
$472.00
$543.00
915.00
$63.00
$338.00
189
SECONDARY STANDARD PRTs
The 5626 has a temperature range of -200°C to 661°C. It makes
a great working or check standard for calibration work up to the
aluminum point. In addition, using a regular PRT at temperatures
above 500°C exposes the platinum to contamination. If the PRT
is used as a reference or calibration standard, contamination is a
major problem. The 5626 is designed to reduce the contamination risk through the use of internal protection while not impairing
performance.
Each unit includes accredited calibration that comes complete
with ITS-90 constants and a resistance-versus-temperature table,
as well as a carrying case.
PRECISION PRTs
190
M1579E
SECONDARY STANDARD THERMISTORS & PRTs
These platinum resistance thermometers are designed to be used
as a transfer device from the highest laboratory standards to
industrial or second-tier lab locations. The element is constructed
of reference-grade platinum wire for excellent stability. The wire is
wound in a coil and placed in a mandrel where it is uniformly supported in a manner to virtually eliminate hysteresis. the electrical
configuration is a four-wire current potential hook-up to eliminate
the effects of lead-wire resistance.
These Inconel-sheathed probes have a partially supported sensing element, making them more durable than SPRTs. The element
is protected in a ceramic case with a hermetic seal to improve
output stability by locking out moisture and contaminants.
Specifications:
Temperature Range:
Transition Temp.:
Drift Rate:
Resistance:
Temp. Coefficient:
Probe Accuracy:
Hysteresis:
Immersion Effects:
Time Constant:
Lead Wires:
Dimensions:
Model
-200 to 420°C
5 to 200°C
±0.01°C at 0°C per year
Nominal 100Ω (±1Ω)
0.003925Ω/Ω/°C nominal
±0.018°C @ -196°C; ±0.018°C @ 0°C;
±0.019°C @ 200°C; ±0.023°C @ 420°C
<0.01°C at 0°C using -196°C and 420°C
as the end points
Reading will not vary more than 0.005°C
9 sec. for 63.2% response to step change
Teflon-insulated, silver-plated stranded
copper, 22 AWG
5612: 0.187" dia. x 9";
5614: 0.25" dia. x 12"
Description
A thermistor offers several advantages over a PRT as a reference thermometer in some applications. A thermistor is much
smaller than a PRT element, and so it can be built into a much
larger variety of probe shapes and sizes. the smaller element
contributes to much faster response as well. A thermistor is less
susceptible to mechanical shock than a PRT. Higher base resistance and larger resistance coefficients make it easier to achieve
precision readings. Better resolution and accuracy are possible
for a lower cost.
These thermistors cover the temperature range of 0 to 100°C
and are accurate to ±0.015°C. Each comes with a NIST-traceable calibration and a resistance versus temperature table in
0.1°C increments
Specifications:
Temperature Range:
Resistance:
Calibration:
0 to 100°C
Nominal 10,000Ω at 25°C
R vs. T table with 0.1°C increments,
interpolation equation furnished
Calibration Uncertainty: Table and equation are accurate to
±0.01°C
Drift:
Better than ±0.01°C per year
Repeatability:
Better than ±0.005°C
5610 & 5665: Stainless steel;
Sheath Construction:
5611: 2-wire silicone coated
Dimensions
5610-6: 0.125" dia. x 6", 6' lead;
5610-9: 0.125" dia. x 9", 6' lead;
5611: 0.070" dia. x 0.55", 6' lead;
5665: 0.125" dia. x 3", 20 ' lead;
Termination:
Spade lugs
Model
Price
5610-6-S
5610-9-S
5611-S
5665-S
Secondary Standard PRT, 9"
$1,141.00
5612-9-X
5614-12-X
Secondary Standard PRT, 12"
$1,141.00
X= Termination. Specify "S" for spade lugs; "D" for 5-pin DIN or
"I" for InfoCon.
M1580E
Description
Immersion Probe, 6"
Immersion Probe, 9"
Silicone Bead Probe
Miniature Immersion Probe for Soil
Price
$889.00
$889.00
$700.00
$779.00
191
TEMPERATURE LABELS
TEMPILABELS are self-adhesive temperature monitors consisting of a heat-sensitive inductor sealed under a transparent, heatresistant window. The indicator material turns from light grey to
black at the temperature rating shown. Colour change is not
reversible and provides a temperature history of the surface
being monitored. To serve as a permanent record, the labels can
be removed and attached to the service report.
Identified in both Fahrenheit and Celsius ratings. Accuracy is
guaranteed to be within 1% of temperature rating below 400°F
(204°C) and 2% at 400°F and higher. Each label is identified by a
lot number traceable to accuracy calibration records.
Series 21 Temperature Monitors are available on sheets of 21
for fast, on-the-spot application. Each label is 1/2" square with a
3/16" diameter indicating dot. Just peel them off of the release
paper one at a time. The adhesive backing easily adheres to any
clean, dry surface.
Model
TLL-21-100
TLL-21-110
TLL-21-120
TLL-21-130
TLL-21-140
TLL-21-150
TLL-21-160
TLL-21-170
TLL-21-180
°F
°C
Model
100
110
120
130
140
150
160
170
180
38
43
49
54
60
66
71
77
82
TLL-21-190
TLL-21-200
TLL-21-210
TLL-21-220
TLL-21-230
TLL-21-240
TLL-21-250
TLL-21-260
TLL-21-270
°F
°C
190
200
210
220
230
240
250
260
270
88
93
99
104
110
116
121
127
132
Model
TLL-21-280
TLL-21-290
TLL-21-300
TLL-21-325
TLL-21-350
TLL-21-375
TLL-21-400
TLL-21-500
°F
°C
280
290
300
325
350
375
400
500
138
143
149
163
177
191
204
260
Model
Description
TLL-21-xxx
Pkg. of 10 Sheets (210 labels)
Price
$137.00
When ordering, please specify temperature rating from chart above.
TEMPERATURE CRAYONS
TEMPILSTIK Crayons are
the simplest-to-use, most
accurate, and least expensive temperature indicators
ever made. To determine
the temperature of any
surface, simply mark the
workpiece before
heating begins.
The dry
opaque mark
will change to
a distinctive
liquid smear when the
temperature rating of the selected crayon is reached. An alternative method is to stroke the
workpiece with the appropriate crayon from time to time during
heating. When the stated temperature is reached, the mark will
liquefy. Response time is on the order of milliseconds.
There are a total of 17 temperature ratings with melting points
between 100°F/38°C and 800°F/427°C. All temperature ratings
are calibrated to a guaranteed tolerance of 1%. Calibrations are
traceable to NBS. Other ranges are available upon request.
The TSTK Test Kit includes 20 temperature indicating crayons
systematically spaced between 125°F (52°C) and 800°F
(427°C)... each with its own adjustable aluminum holder, and all
in a self-contained case. The Kit provides all the information you
will need for determining the proper temperatures for welding,
heat treating, soldering, brazing, and other operations involved in
the fabrication of most metals, as well as for measuring preheat,
interpass, and postweld heat treatment temperatures.
192
Each crayon measures 5” in
length and comes with an adjustable aluminum holder with pocket clip.
M382E
Model
Description
TS100
TS150
TS175
TS200
TS225
TS250
TS275
TS300
TS350
TS400
TS450
TS500
TS550
TS600
TS650
TS700
TS800
TSTK
TEMPILSTIK Crayon, 100°F/38°C, 10/pkg.
TEMPILSTIK Crayon, 150°F/66°C, 10/pkg.
TEMPILSTIK Crayon, 175°F/79°C, 10/pkg.
TEMPILSTIK Crayon, 200°F/93°C, 10/pkg.
TEMPILSTIK Crayon, 225°F/107°C, 10/pkg.
TEMPILSTIK Crayon, 250°F/121°C, 10/pkg.
TEMPILSTIK Crayon, 275°F/135°C, 10/pkg.
TEMPILSTIK Crayon, 300°F/149°C, 10/pkg.
TEMPILSTIK Crayon, 350°F/177°C, 10/pkg.
TEMPILSTIK Crayon, 400°F/204°C, 10/pkg.
TEMPILSTIK Crayon, 450°F/232°C, 10/pkg.
TEMPILSTIK Crayon, 500°F/260°C, 10/pkg.
TEMPILSTIK Crayon, 550°F/288°C, 10/pkg.
TEMPILSTIK Crayon, 600°F/316°C, 10/pkg.
TEMPILSTIK Crayon, 650°F/343°C, 10/pkg.
TEMPILSTIK Crayon, 700°F/371°C, 10/pkg.
TEMPILSTIK Crayon, 800°F/427°C, 10/pkg.
20 Crayon Test Kit
Price
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$163.00
$305.00
TEMPERATURE DECALS
Features:
• Windows permanently change colour when temperature is
reached
• Dual temperature ranges from 100 to 490°F and 37 to 254°C
• Accuracy of ±1%
• Only 3/4” x 1-3/4” x 0.01” thick
• Supply of 10 decals per box
Temp-Plates are available in a variety of temperature ranges with
an accuracy of ±1% and are calibrated on NIST secondary
standards. Each package contains a lot number for traceability.
their miniature size allows installation where other devices are
impractical. the Temp-Plate Decal measures on 3/4” x 1-3/4”
and is 0.01” thick. Temp-Plates adhere to most surfaces and
resist solvents, fuels, grease, oil, water, and steam.
Model
612.1
612.2
612.3
612.4
612.5
612.6
612.7
612.8
612.9
Range
120, 140, 160, 180°F (48, 60, 71, 82°C)
150, 160, 170, 180°F (65, 71, 76, 82°C)
160, 180, 200, 220°F (71, 82, 93, 104°C)
200, 220, 240, 260°F (93, 104, 115, 126°C)
310, 320, 330, 340°F (154, 160, 165, 171°C)
100, 120, 140, 160°F (37, 48, 60, 71°C)
270, 280, 290, 300°F (132, 137, 143, 148°C)
360, 380, 400, 420°F (182, 193, 204, 215°C)
435, 450, 465, 490°F (223, 232, 240, 254°C)
Price
$69.00
$69.00
$69.00
$69.00
$69.00
$69.00
$69.00
$85.00
$85.00
TANK THERMOMETERS
Features:
•
•
•
•
•
•
•
Designed specifically for the air gas and tank filling industry
Magnetic holding power
Unbreakable plastic lens
Fully enclosed
Single or dual max-min hands available
Certification to NIST available
Safety strap kit available
Specifications:
Accuracy:
±2% of full scale
Magnetic Holding Power: 13 lbs.
Dimensions:
4.25 x 2.25 x 0.56” (108 x 57 x 14mm)
Weight:
6 oz (170g)
Model
520-350F
520-315F
520-312F
520-350C
520-315C
520-312C
M1719E
Description
Tank Thermometer, -20 to 160°F
Tank Thermometer, 0 to 150°F
Tank Thermometer, 0 to 250°F
Tank Thermometer, -30 to 70°C
Tank Thermometer, -15 to 65°C
Tank Thermometer, -20 to 120°C
Price
$215.00
$215.00
$0.00
$215.00
$0.00
$215.00
193
DIGITAL THERMOMETERS
Features:
Features:
• Compact clean design
• Indoor or outdoor temperature
selected by slide switch
• Indoor temperature range:
-10 to +50°C
• Outdoor temperature range:
-50 to +70°C
• Reads Fahrenheit equivalent
when switch is activated
• Large LCD readout is powered by one "AA" battery
(included)
• Self-contained unit mounts
on wall
• Displays indoor
temperature
and humidity
measurements
• Colour-coded
temperature
and humidity
indicators
• Easy-to-read
dials with rotating
faces mount horizontally and vertically
• Temperature Range: -25 to 55°C (-10 to 130°F)
• Humidity Range: 0 to 100% RH
• Dimensions: 7.25 x 6.75 x 1.5”
Model
DG957
Description
Indoor/Outdoor Thermometer
Price
$24.00
Maximum/minimum indoor/
outdoor thermometer with indoor
hygrometer.
• Triple LCD display: indoor and
outdoor temperatures and
indoor humidity
• Outdoor temperature range:
-50 to +70°C
• Indoor temperature range:
-10 to +50°C
• Humidity range: 25 to 98% RH
• Resolution: 0.1°C/F
• Power Supply: one 1.5V AA
battery (included)
• °C/°F switchable
• Stand/wall mountable
DG973
Description
Description
Indoor Thermo-hygrometer
Price
$12.00
Mid-size indoor thermo-hygrometer with
dual display. Check the maximum or
minimum temperature and indoor
humidity reading by pressing the
Max/Min button.
Features:
Model
Model
TR415
Features:
• High/Low daily temperature memory
• Indoor temperature range:
-10 to +50°C
• Resolution: 0.1°C/F
• Humidity range: 25 to 98% RH
• Power Supply: Single 1.5V AA
battery (included)
• °C/°F switchable
• Wall mountable
Price
Model
Description
Max-Min Indoor/Outdoor Thermo-Hygrometer $42.00
DG977
Thermo-Hygrometer
Price
$37.00
Features Model 608-H1:
Features Model 608-H2:
•
•
•
•
•
• All of the advantages of Model 608-H1, plus
• Monitors upper and lower limit values with visual alarms for
temperature, humidity or dew point
• Guaranteed accuracy ±2% RH over the entire range
• Calibration protocol included
• Integrated calibration function
• Humidity Range/Resolution: 2 to 98% RH/0.1% RH
• Humidity Accuracy: ±2% RH ±1 digit
• Temperature Range/Resolution: -14 to 160°F (-10 to 70°C);
-40 to 160°F dp (-40 to 70°C dp)/0.1°F (0.1°C)
• Temperature Accuracy: ±1°F/0.5°C ±1 digit
Measurement of relative humidity, dew point and temperature
Integrated capacitive humidity sensor
Min/Max value display with reset function
Battery operated
Humidity Range/
Resolution: 10 to 95%
RH/0.1% RH
• Humidity Accuracy: ±3%
RH ±1 digit
• Temperature Range/
Resolution: 32 to 122°F
(0 to 50°C); -4 to 122°F
dp (-20 to 50°C dp)/0.1°F
(0.1°C)
• Temperature Accuracy:
±1°F/0.5°C ±1 digit
194
Model
0560.6081
0560.6082
M2512E
Description
Thermo-Hygrometer
Thermo-Hygrometer w/ Alarm
Price
$111.00
$189.00
DIGITAL THERMOMETERS
Features:
Features:
• Monitor meat temperatures at your
BBQ from inside your home
• Remote sensor senses meat temperature and transmits this temperatures
to the main display unit up to 100
feet away
• Preset your own “target” temperatures
• Beeper signals when “target” temperature is
reached
• Stainless steel probe with 1m heat-resistant
wire
• Temperature Range: -40 to
200°C (40 to 392°F)
• Pre-programmed cooking temperatures for a variety of meats and personal taste preferences
• Select taste setting: Rare to Well
Done
• Displays preset as well as internal
cooking temperatures
• Stainless steel probe with 1m heatresistant wire
• Temperature Range:
-10 to 200°C (14 to
392°F)
• °C/°F switchable
Model
DT105
Description
Remote BBQ Thermometer
Price
$70.00
Model
DT100
Description
Pre-programmed Thermometer/Timer
Price
$43.00
Features:
Features:
• Displays temperature readings transmitted from a remote sensor that can located up to 30m away from the display unit
• Outdoor temperature range:
-40 to +60°C (-40 to 140°F)
• Indoor temperature range:
-10 to +50°C (14 to 122°F)
• °C/°F switchable
• Resolution: 0.1°C/F
• Max/Min temperature
memory
• 12/24 hour clock and
calendar
• Quartz alarm clock with
“snooze” function
• Displays temperature readings transmitted from a remote
sensor that can located up to 30m away from the display unit
• Outdoor temperature range:
-40 to +60°C (-40 to 140°F)
• Indoor temperature range:
-10 to +50°C (14 to 122°F)
• Jumbo 6.5” x 3.75” LCD readout
• °C/°F switchable
• Max/Min temperature memory
• 12/24 hour clock and calendar
• Alarm clock with snooze
function
• Temperature trend and frost
alarm
• Desk or wall mountable
• Batteries included
Model
Price
Model
DG901 Wireless Indoor/Outdoor Thermometer w/ Clock $38.00
Description
DG910
Features:
Features:
• Displays indoor and outdoor
temperature measurements
• Outdoor temperature range:
-40 to +60°C (-40 to 140°F)
• Indoor temperature range:
-10 to +50°C (14 to 122°F)
• °C/°F switchable
• Max/Min temperature memory
• 3m (10’) wired sensor
• Displays indoor and outdoor temperature measurements as well as
changes in barometric pressure
• Outdoor temperature range:
-50 to 60°C (-50 to 158°F)
• Indoor temperature range:
-10 to 50°C (14 to 122°F)
• °C/°F switchable
• Max/Min temperature memory
• 12/24 hour clock and calendar
• Quartz alarm clock with “snooze”
function
Model
Description
DG900
Indoor/Outdoor Thermometer
Price
Model
DG902
$13.00
M1720E
Description
Price
Jumbo Indoor/Outdoor Thermometer w/ Clock $55.00
Description
Price
Indoor/Outdoor Thermometer w/ Forecasting $45.00
195
INDOOR/OUTDOOR THERMOMETERS
This compact thermometer provides instant
readouts of time, indoor temperature and
3-channel wireless outdoor temperatures.
Features:
• Triple LCD display
• High-Low daily temperature
memory
• Outdoor temperature range:
-50 to 70°C (-58 to 158°F)
• Indoor temperature range:
0 to 50°C (32 to 122°F)
• Resolution: 0.1°C/F
• °C/°F switchable
• Temperature alarm
• Radio-controlled clock with
8-minute snooze alarm
• Extended backlight
• Power Supply: 2 "AAA" 1.5V
batteries (receiver); 1 9V
battery per remote sensor
• Stand/wall mountable receiver
Features:
• Registers both
indoor and outdoor
temperatures
with Min/Max
memory
• 12 hour
clock
• Wide temperature range: -50° to 70°C
• Full 1-inch LCD digits
• Ten foot cable to remote temperature sensor
• Desk mount or wall mount by two sided tape or screws
• Operated by single “AAA” size battery (included)
• Dimensions: 4” x 4” x 3/4”
Model
119
Description
Indoor/Outdoor Thermometer w/ Clock
Price
Model
$60.00
Description
Price
DG803 Wireless Indoor/Outdoor Thermometer w/ Clock $69.00
WALL THERMOMETERS
Features:
Model 815 features a bimetal sensing element which is individually
adjusted to bring it within published accuracy for the instrument. Both models have a
micrometer adjustment for
precise calibration. The sides
of the instrument have perforations that allow free access
to the air of the environment.
The case has 2 key-hole slots
on the back to facilitate wall
mounting. Both models
come complete with an ancillary
hand. This extra pointer may be preset to afford a visual check of
an approaching critical temperature. The instrument may be used
in any position or fastened to a wall or other support that is not
affected by extraneous temperatures.
• Thermometer registers highest and
lowest readings from last setting
• Pushbutton reset releases limit markers
• Plastic case measures 8"H x 2-3/16" W
x 3/4"D
• Range: MMC: -40° to 50°C;
MMF: -40° to 120°F
Specifications:
Range:
Accuracy:
Resolution:
Response Times:
Dimensions:
Weight:
815F: 0° to + 150°F; 815C: -15° to +65°C
815F: ±1° f.s.; 815C: ±1/2° f.s.
1° divisions (F & C)
Moving Air: Approx. 6 min.;
Still Air: Approx. 13 min.
3 3/4” x 1 1/4” (9.53 x 3.18 cm) Dia. x H
3 3/4 oz. (106.3 g)
Model
Description
815F
815C
815FC
815CC
Wall Thermometer, °F
Wall Thermometer, °C
Certified Wall Thermometer, °F
Certified Wall Thermometer, °C
196
Price
$127.00
$127.00
$264.00
$264.00
M378E
Model
Description
MMF
MMC
Max-Min Thermometer, °F
Max-Min Thermometer, °C
Price
$12.00
$12.00
STEM THERMOMETERS
Features:
•
•
•
•
•
On/Off and °F/°C buttons
Data hold function
Auto power off
Stainless steel probe
Protective probe cover included
Features:
•
•
•
•
Features:
Specifications:
Range: -50 to 150°C/-58 to 302°F
Accuracy: ±1°C between -20 to 120°C,
o/w ±2°C; ±2°F between -4 to 248°F,
o/w ±4°F
Resolution: 0.1° between -19.9 to 199.9°,
o/w 1°
Display: 6mm (0.25") high LCD
Sampling Rate: 1 second
Power Supply: 1 x 1.5V LR44 type battery
Probe Dimensions: Ø 3.5mm x 125mm
Display Dimensions: Ø 20mm x 58mm
Weight: 23 g
• Large, easy-to-read LCD
• Fahrenheit/Celsius switchable
• Measurement range: -40° to 450°F and
-40° to 230°C
• Accuracy: 0 to 230°F: ±1.0°F; <0°F:
±3.6°F; >230°F: ±3.6°F
• Resolution: 0.1°F/°C
• Display updates every 2 seconds
• Powered by 1.5V watch battery,
included
• 5" stainless steel stem
• Handy nylon case with shirt pocket clip
included
Model
Description
RT-320CF Digital Stem Therm.
Model
Description
Price
PS100 Digital Stem Thermometer $35.00
Price
$35.00
•
•
•
•
•
•
•
1" diameter pocket thermometer
Easy-to-read LCD numerals
Fahrenheit/Celsius switchable
Wide measurement range:
-40° to 302°F and -40° to 150°C
Accuracy: ±2°F or ±1°C
Display updates every one second
Powered by 1.5V watch battery,
included
Free spare battery
5" stainless steel stem
Immerse stem at least 1" for accurate
readings
Handy nylon case with shirt pocket clip
included
Model
Description
Price
DT130 Digital Stem Thermometer $24.00
TEMPERATURE "STICKS"
The Testo 905-T2 is a professional instrument
at a very economical price.
The Testo 905-T1 is one of the fastest and
most accurate mini-thermometers in the
world. A Type K thermocouple sensor provides fast and accurate measurements.
Features:
• Spring-loaded sensor conforms itself to
every type of surface
• Protective case prevents sensor damage
• Fast response (4 seconds)
• Click-in-place, 180°rotating head for easy
viewing
• ISO Calibration Certificate included
Features:
• Industrial Type K sensor located at
measuring tip gives fast and accurate
readings
• Large measuring range (up to 900°F short term)
• Click-in-place, 180° rotating head for easy viewing
• ISO Calibration Certificate included
Specifications:
Specifications:
Range:
-60 to 660°F (-50 to 350°C);
900°F short term
Resolution:
0.1°/1.0°
Accuracy:
±1°F < 200°F, ±1% m.v. ≥ 200°F
Response Time:
<4 seconds
Power Supply:
3V (CR2932) battery
Battery Life:
Approx. 100 hours
Probe Dimensions: 0.393" dia. x 5.9" L
Range:
-60 to 660°F (-50 to 350°C);
900°F short term
Resolution:
0.1°/1.0°
Accuracy:
±1°F < 200°F, ±1% m.v. ≥ 200°F
Response Time:
<10 seconds
Power Supply:
3V (CR2932) battery
Battery Life:
Approx. 100 hours
Probe Dimensions: 0.12" dia. x 7.9" L
Model
0560.9051
Description
Type K Penetration Thermometer
Price
Model
$108.00
0560.9052
M2195E
Description
Type K Surface Thermometer
Price
$139.00
197
SURFACE THERMOMETERS
These Dual Magnet Mount Surface Thermometers are specifically
designed to be used on horizontal or ferrous non-horizontal surfaces. These instruments feature two alnico magnets that act as
the thermometer’s base and hold it in place on ferrous surfaces.
The bimetallic sensor is a specially processed alloy that is preconditioned and pretested for permanent calibration and maximum
stability. It is located in a draft shield and is in virtual thermal contact with the surface to be measured. This gives the instrument a
relatively quick response time. The thermometer reaches sensing
equilibrium (stability) within three minutes.
Applications:
Designed for applications such as: hot plates; griddles; die-cast
dies; foundry core boxes; annealing ovens; weld preheats; motors;
generators, and engines; bearings; boilers, tanks, and drums.
Specifications:
Accuracy:
Time Constant:
Dimensions:
Weight:
Model
312FC
314FC
330F
330C
±2% of full scale
From 0.06 to 1 min. (depending on range)
2” dia. x 1/2 h. (5.1 x 1.3 cm)
1 1/2 oz. (43 g)
Range
0° to +250°F/
-20° to +120°C
+50° to +750°F/
+10° to +400°C
-100° to +160°F
-70° to +70°C
Divisions
2°F
1°C
10°F
5°C
2°F
2°C
Price
$48.00
$48.00
$52.00
$52.00
PIPE-SURFACE THERMOMETERS
These Spring Held Pipe-Surface Thermometers are designed to
measure the surface temperatures of pipes, cylinders, spindles,
that have outside diameters of 3/4” or more. These instruments
work on a convection-radiation principle. The thermometer is
attached to the pipe by means of a high-resiliency, stainless steel
spring kit which retains its life indefinitely. The time constant (the
time required to reach 63% of an instantaneous temperature
change) is 42 seconds.
These thermometers provide a fast, reliable, and economical
method of measuring exterior curved surfaces. The insulating
and seating cup rests on the surface of the pipe and protects the
sensor from drafts or heat from other sources. The cup is made
of high-temperature Ryton polyphenylene sulfide thermoplastic.
The bimetallic sensor is ASTM Bimetal TM-2, heat-treated and
checked for permanent calibration. The design uses a small thermal mass and provides fast response and sensitivity.
Specifications:
Accuracy:
Time Constant:
Dimensions:
Weight:
All models come complete with a Spring KIt
(Part No. 486.84) consisting of three stainless steel
springs, which can be used separately or connected
together for larger diameter pipes.
198
M380E
±2% of full scale
42 seconds
2” dia. x 1” h. (5.1 x 2.5 cm)
1 1/2 oz. (43 g)
Model
Range
Divisions
486F
486C
488F
488C
-50° to +250°F
-40° to +120°C
70° to +500°F
20° to +260°C
2°F
2°C
5°F
5°C
Price
$79.00
$79.00
$79.00
$79.00
1" DIAL THERMOMETER
Luminescent dial means no more
fumbling in the dark!
Features:
•
•
•
•
•
•
•
Hermetically sealed 1" diameter dial
Stainless steel case and stem (5" long)
Accuracy: ±1% of full scale
External recalibration adjustment
Unbreakable polycarbonate lens standard
Shockproof construction standard
Nylon pocket case serves as a handy thermometer holder
Model
Range
6092L
6096L
0° to +220°F
-40° to +160°F
Price
$35.00
$35.00
1" DIAL THERMOMETER
Perfect for pocket or tool kit!
Features:
•
•
•
•
•
•
•
•
•
Model
Range
Divs.
6071-1
6072-1
6073-1
6074-1
-40° to +120°F
0° to +220°F
+50° to +550°F
-40 to +70°C
2°F
2°F
5°F
2°C
Easy readability on 1” diameter dial
Extended scale design with high visibility dial graphics
Superior shock protection prevents calibration shift when dropped
5"L x 0.142” dia. pointed stem
Unbreakable polycarbonate lens
Hermetically sealed dial plate stops internal fogging
External dial reset allows you to calibrate at any scale point
All stainless steel external parts
Plastic pocket case can be used as a handle
Price
Model
Range
Divs.
$22.00
$22.00
$22.00
$22.00
6075-1
6076-1
6079-1
+25 to +125°F
-40° to +160°F
-10 to +110°C
1°F
2°F
2°C
Price
$22.00
$22.00
$22.00
2" DIAL THERMOMETER
"Instant" pointer response!
Features:
•
•
•
•
•
•
•
•
•
•
Model
6210
6211
6212
6213
6214
6215
6217
6218
6219
Range
Div.
Price
-100 to +100°F
-40 to +120°F
+25 to +125°F
-40 to +160°F
0 to +180°F
0 to +220°F
0 to +250°F
+50 to +300°F
+50 to +400°F
2°F
2°F
1°F
2°F
2°F
2°F
2°F
2°F
5°F
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
2" diameter dial with 8" slim stem (0.142" dia.)
Anti-parallax dial case design
All stainless steel external parts
Unbreakable polycarbonate lens
Superior shock protection
High visibility dial graphics
Extended scale design
External recalibration
±1% of range accuracy
Three point factory calibration (NIST traceable)
Model
6220
6231
6232
6233
6234
6235
6236
6238
6216
M383E
Range
Div.
+50 to +550°F
-40 to +50°C
0 to +50°C
-50 to +100°C
0 to +100°C
-10 to +110°C
0 to +150°C
0 to +250°C
0/220°F & 10/100°C
5°F
1°C
0.5°C
2°C
1°C
1°C
2°C
2°C
2°F & 1°C
Price
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
$32.00
199
BI-METAL THERMOMETERS
Dimensions
Dimensions
Dimensions:
Dial Size
A
B
3"
3-1/4"
15/16"
76.2 mm
82.55 mm
23.81 mm
5"
5-1/4"
15/16"
127 mm
133.35 mm
23.81 mm
All dimensions ±1/16" / 1.58 mm
Stem Length
(incl. thread)
2-1/2"
4"
6"
9"
12"
Model
Range
3" Dial
°F
°C
0 / 250
-20 / 120
3RBM25-250
3RBM4-250
3RBM6-250
3RBM9-250
3RBM25-550
50/550
0/260
3RBM4-550
3RBM6-550
3RBM9-550
3RBM6-1000 200/1000
100/550
NPT
1/2"
1/2"
1/2"
1/2"
1/2"
Longer stem lengths available
NOTE: When ordering liquid filled Bi-Metals add prefix SF to appropriate model
number. Ex: SF3RBM25
5" Dial:
Model
5" Angle
5" Straight
5RBM25
5RBMS25
5RBM4
5RBMS4
5RBM6
5RBMS6
5RBM9
5RBMS9
5RBM12
5RBMS12
B
1-7/8"
47.62 mm
1-7/8"
47.62 mm
Series RBM:
3" Dial:
Model
3" Angle
3" Straight
3RBM25
3RBMS25
3RBM4
3RBMS4
3RBM6
3RBMS6
3RBM9
3RBMS9
3RBM12
3RBMS12
Dial Size
A
3"
3-1/4"
76.2 mm
82.55 mm
5"
5-1/4"
127 mm
133.35 mm
All dimensions ±1/16" / 1.58 mm
S (stem length)
as
specified
as
specified
Stem Length
(incl. thread)
2-1/2"
4"
6"
9"
12"
NPT
1/2"
1/2"
1/2"
1/2"
1/2"
Stem
Length
2 1/2"
4"
6"
9"
2 1/2"
4"
6"
9"
6"
Price
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
Stem¡
Length
2 1/2"
4"
6"
9"
Price
$76.00
$76.00
$76.00
$76.00
Series RBMS:
Model
Range
3" Dial
°F
°C
-20 / 120
3RBMS25-250 0 / 250
3RBMS4-250
3RBMS6-250
3RBMS9-550 50/550
0/260
Longer stem lengths available
Please contact us for prices on RMB & RMBS Series with 5"
diameter dial.
200
M1517E
BI-METAL THERMOMETERS
Features:
• All welded stainless steel
construction
• Easy external recalibration
adjustment
• Anti-parallax dial
• Hermetically sealed per
ASME B40.3
• Accurate to 1% per ASME
B40.3 Grade A
• Over-range protection is 50%
up to 500° F (10% above
500° F)
• Fully gasketed glass lens
• Silicone filled models available for extreme vibration or
low temperature application
Stocked Models:
Model
Range
Stern
5" Dial
°F
°C
Length
Price
2-1/2"
$105.00
5VBM25-250
4"
$105.00
5VBM4-250
5VBM6-250
0 / 250
-20 / 120
6"
$105.00
9"
$105.00
5VBM9-250
5VBM12-250
12"
$115.00
5VBM25-550
2-1/2"
$105.00
50/550
0/260
4"
$105.00
5VBM4-550
5VBM6-550
6"
$105.00
5VBM12-550
12"
$115.00
5VBM6-800
100 / 800
40/ 425
6"
$105.00
12"
$115.00
5VBM12-800
* Other stem lengths available upon request - P.O.A.
Please contact us for prices of VBM Series with 3" diameter
dial.
Dimensions:
Dial Size
A
B
3"
3-1/4"
15/16"
76.2 mm
82.55 mm
23.81 mm
5"
5-1/4"
15/16"
127 mm
133.35 mm
23.81 mm
All dimensions ±1/16" / 1.58 mm
Standard Ranges:
3" Dial:
Model
3" Vari-angle
3VBM25
3VBM4
3VBM6
3VBM9
3VBM12
Stem Length
(incl. thread)
2-1/2"
4"
6"
9"
12"
NPT
1/2"
1/2"
1/2"
1/2"
1/2"
Longer stem lengths available
NOTE: When ordering liquid filled Bi-Metals add
prefix SF to appropriate model number.
Ex: SF3VBM25
5" Dial:
Model
5" Vari-Angle
5VBM25
5VBM4
5VBM6
5VBM9
5VBM12
S (stem length)
as
specified
as
specified
Stem Length
(incl. thread)
2-1/2"
4"
6"
9"
12"
NPT
1/2"
1/2"
1/2"
1/2"
1/2"
Fahrenheit
-80-0-120 °
-20-0-120 °
**30-130 °
0-200 °
0-250 °
50-300 °
50-400 °
50-550 °
*100-800 °
**200-1000 °
Fig. Scale
Inter Div.
20°
20°
10°
20°
20°
20°
50°
50°
100°
100°
2°
2°
1°
2°
2°
2°
5°
5°
10°
10°
Celsius
-50-0-50 °
** 0-50 °
0-100 °
0-150 °
0-200 °
0-300 °
* 0-450 °
* 100-550 °
Fig. Scale
Inter. Div.
10°
5°
10°
10°
20°
50°
50°
50°
1°
1/ 2°
1°
1°
2°
2°
5°
5°
Dual Scale, °F/°C
80-0-120 °F/60-0-50°C
20-0-120 °F/30-0-50 °C
** 30-130 ° F/0-55°C
0-200°F/-15-90 °C
0-250°F/-20-120 °C
50-300°F/10-150 °C
50-400°F/10-200 °C
50-550°F/10-260 °C
100-800°F/40-425 °C
200-1000°F/100-540 °C
* Satisfactory for continuous service up to 800° F or 425° C.
Can be used for intermittent service from 800-1000 ° F or 425-500 ° C
* Minimum stem length for these ranges is 4".
** Minimum stem length is 4" straight and vari-angle form.
WARNING: All bimetal thermometers should be selected considering media and operating
conditions. Improper application can be detrimental to the thermometer causing failure and
possible personal injury or property damage.
Longer stem lengths available
M1518E
201
REMOTE READOUT THERMOMETERS
Features:
• Standard instruments supplied with 5 feet of 3/32" bronze
armored copper capillary tubing, 6" brass sensing bulb and
1/2" NPT brass union. (Other lengths available)
• Standard thermometers furnished with bottom connection
capillary and recessed flange for surface mounting
(35BL Series)
• Also available with back connection capillary and forward flange
for panel mounting (35BR Series)
• White 3-1/2" diameter dial with black graduations; non-linear
scales
• Dual scale, all thermometers feature Fahrenheit range listed as
well as Celsius equivalent
• Accuracy ±0.05% of full scale reading
• Can be inclined at any angle without loss of accuracy
• Thermometers protected for 25% overrange
Range
5’ CAPILLARY
-40 to 110°F/C
0 to 150°F/C
20 to 220°F/C
30 to 300°F/C
10’ CAPILLARY
-40 to 110°F/C
0 to 150°F/C
20 to 220°F/C
30 to 300°F/C
These vapour filled dial thermometers
indicate temperatures in remote or
inconvenient places via a minimum 5-foot
sensor cable. Simply insert the sensor bulb
in the environment to be measured and
mount the dial in an accessible location.
15’ CAPILLARY
-40 to 110°F/C
0 to 150°F/C
20 to 220°F/C
30 to 300°F/C
Surface Mount
Model
Price
Panel Mount
Model
Price
35BL110-5
35BL150-5
35BL220-5
35BL300-5
$138.00
$138.00
$138.00
$138.00
35RB110-5
35RB150-5
35RB220-5
35RB300-5
$158.00
$158.00
$158.00
$158.00
35BL110-10
35BL150-10
35BL220-10
35BL300-10
$159.00
$159.00
$159.00
$159.00
35RB110-10
35RB150-10
35RB220-10
35RB300-10
$180.00
$180.00
$180.00
$180.00
35BL110-15
35BL150-15
35BL220-15
35BL300-15
$181.00
$181.00
$181.00
$181.00
35RB110-15
35RB150-15
35RB220-15
35RB300-15
$201.00
$201.00
$201.00
$201.00
PYROMETER KITS
The basic items supplied in each kit are:
1) The meter is a d'Arsonval type millivolt meter which has been
calibrated to indicate temperature rather than voltage.
Accuracy is ±2% of full scale range. A cold junction temperature adjustment screw is located immediately below the dial.
The front flange is provided for mounting the meter flush with
a panel or dashboard.
2) Six feet of 20-gauge wire is the standard length provided
in each kit. The thermocouple wire is either Iron Constantin
(IC) or Chromel Alumel (CA), depending upon the tempera
ture range required. The wire is glass insulated to withstand
high temperatures.
3) The black anodized aluminum mounting bracket is conveniently arranged with two sets of three mounting holes
for vertical or horizontal meter mounting.
The Model 326 Series Pyrometer Kits are
designed to offer the user an inexpensive
and very flexible method of accurately
measuring temperatures from 0° to 2300°F
202
Model
326-IC
326-CA
326L-IC
M1721E
Range
Resistance
0 to 1600°F/0 to 850°C
0 to 2300°F/0 to 1260°C
+30 to 630°F/0 to 330°C
2.22 Ω
3.58 Ω
2.22 Ω
Price
$222.00
$222.00
$222.00
CUP CASE THERMOMETERS
A number of important features make this
series of cup case thermometers versatile in
application. Thermometers are dual scale,
either Permacolor red liquid or mercury
filled. The basic unit is a stainless steel case
with a metal top ring. It is recessed at the
sides to reduce reflections on thermometer
glass. Graduations and numerals are etched
into stainless steel V-shaped scales. Brass
case also available for non-sparking applications. Overall length: 13-1/2".
Model
5408
5409
5410
5411
5416
5417
Description
Case Material
Liquid Fill
Range
Price
Metal Ring
Metal Ring
Metal Ring w/ cup
Metal Ring w/ cup
Metal Ring w/ cup
Metal Ring w/ cup
Stainless
Stainless
Stainless
Stainless
Brass
Brass
Permacolor
Mercury
Permacolor
Mercury
Permacolor
Mercury
-40 to 130°F/-40 to 55°C
-10 to 260°F/-20 to 125°C
-40 to 130°F/-40 to 55°C
-10 to 260°F/-20 to 125°C
-40 to 130°F/-40 to 55°C
-10 to 260°F/-20 to 125°C
$57.00
$60.00
$50.00
$60.00
$60.00
$60.00
POCKET CASE THERMOMETERS
These pocket case and armor thermo-meters are made with BINOC
tubing which magnifies the liquid column for improved readability
under all conditions.
Thermometers are mercury filled, for more stable readings, or red
Permacolor liquid filled for reading in poor light. Available in °F or °C,
they are calibrated for total immersion. Permark pigment ensures
that graduations and numerals will not rub off. All thermometers
measure 5-1/2" long. A snap-on pocket case with clip and built-in,
hold-on top, with eyelet for easy suspension, comes with each thermometer.
Plastic Case
Model
Price
Metal Case
Model
Price
21412-1
21418-1
21420-1
21424-1
21430-1
21432-1
21438-1
21412-2
21418-2
21420-2
21424-2
21430-2
21432-2
$28.00
$17.00
$26.00
$26.00
$30.00
$23.00
Range
$32.00 -50° to 20°F
$29.00
0° to 220°F
$29.00
0° to 220°F
- -10° to 110°C
$34.00 -35° to 50°C
$32.00 -40° to 50°C
-15° to 105°C
Liquid Fill
Permacolor
Mercury
Permacolor
Permacolor
Mercury
Permacolor
Mercury
TANK THERMOMETERS
Features:
• Manufacturered to API and ASTM requirements
• 12" long front lens red reading mercury tube
• 14" black plastic chemical resistant case with 120 ml cup
Model No.
c/w Case
272-1
272-2
272-3
272-5
272-C1
272-C2
272-C3
ASTM
Price Tube No.
$117.00
$117.00
$117.00
$117.00
$117.00
$117.00
$117.00
58F
97F
59F
58C
59C
Range
Div.
-30 to 120°F
0 to 120°F
0 to 180°F
20 to 220°F
-10 to 110°C
-34 to 49°C
-18 to 82°C
1°F
1°F
1°F
1°F
1°C
1/2°C
1/2°C
Model No.
Refill Tube
272-R1
272-R2
272-R3
272-R5
272-RC1
272-RC2
272-RC3
Price
Model No.
c/w Case
PC14-58F
PC14-59F
PC14-YP230
PC14-YP110
PC14-YP50
$63.00
$63.00
$63.00
$63.00
$63.00
$63.00
$63.00
M2352E
ASTM
Price Tube No.
Range
Div.
$46.00
58F
-30 to 120°F 1°F
$46.00
59F
0 to 180°F
1°F
$46.00
0 to 230°F
1°F
$46.00
-20 to 110°C 1°C
$46.00
58C
-34 to 49°C 1/2°C
Model No.
Refill Tube
58F
59F
YP230
YP110
YP50
Price
$29.00
$29.00
$29.00
$29.00
$29.00
203
INDUSTRIAL THERMOMETERS
Features:
CASE: Modern V-shape design with parts molded of GE Valox ®
polyester, in black textured finish. Heavy glass protected front
firmly secured against rattles by spring action.
STEM: For 3-1/2" stems only and ranges up to and including
300° F, the stem material is a precision die cast Zamac alloy.
For ranges above 300° F, bulb chamber is a precision machined
aluminum alloy with copper plated steel stem extension. For
separable socket connections only.
LOCKING DEVICE: Adjustable case locknut and angle adjusting
screw work independently to provide a full 360° positioning of
thermometer case and stem.
ADJUSTABLE JOINT: GE Valox finished to match case.
Completely encloses capillary to prevent tampering and
foreign matter for entering instrument.
TUBE & CAPILLARY: Mercury filled-magnifying lens "red reading" tube. Precision made to guarantee accuracy within 1% of
scale range. Silicone shock mounted for lasting durability. Red
spirit filled tubes are available.
SCALE: White coated aluminum with permanently baked bold
black markings. Locked in place and adjusted through device at
top of scale. There are no mounting screws to cover up scale
markings.
5" Industrial Thermometer
Therm.
Type
Straight
Model
5SS2-115
5SS4-115
5SS2-245
5SS4-245
5SS2-400
5SS4-400
90° Back 5AS2-115
Angle
5AS4-115
5AS2-245
5AS4-245
5AS2-400
5AS4-400
Thermowells sold separately.
9" Vari-angle Thermometer w/ 3-1/2 Stem
Model
9VU35-115
9VU35-125
9VU35-165
9VU35-185
9VU35-245
9VU35-305
Dual Scale
Temperature Range
-40 to 110F / -40 to 43C
0 to 120F / -17 to 49C
0 to 160F / -17 to 71C
30 to 180F / -6 to 82C
30 to 240F / 0 to 114C
30 to 300F / -1 to 149C
Divs.
2°F / 1°C
1°F / 1/2°C
2°F / 1°C
2°F / 1°C
2°F / 1°C
2°F / 1°C
Price
$43.00
$43.00
$43.00
$43.00
$43.00
$43.00
Temperature
Stem
Range
Length Price
-40/100°F & -40/40°C
2"
$28.00
(2°F div. & 1°C div.)
4"
$50.00
30/240°F & 0/114°C
2"
$28.00
(2°F div. & 1°C div.)
4"
$50.00
50/400°F & 10/200°C
2"
$28.00
(5°F div. & 2°C div.)
4"
$50.00
-40/100°F & -40/40°C
2"
$28.00
(2°F div. & 1°C div.)
4"
$50.00
30/240°F & 0/114°C
2"
$28.00
(2°F div. & 1°C div.)
4"
$50.00
50/400°F & 10/200°C
2"
$28.00
(5°F div. & 2°C div.)
4"
$50.00
Thermowells
Separable sockets are used to provide pressure tight connections where required. They
also offer the advantage of allowing a thermometer to be removed from a system without disturbance. The thermometer is inserted and tightened to the separable socket by
means of a threaded swivel nut coupling. Quick response to temperature changes is
assured since the stem and socket are precision tapered, providing a metal to metal
contact at the sensitive bulb section. Thread location determines the insertion length and
the length available for insulation.
Navy Class Thermowells:
Standard Form - E series
Stem/Insert
Length
2"/1-5/16"
4"/3-5/16"
Brass
Model
E13S-BS
E13L-BS
304SS
Price Model
$9.00 E13S-SS
$35.00 E13L-SS
316SS
Price Model
$52.00 E13S-316SS
$87.00 E13L-316SS
Price
$104.00
$139.00
Standard Form "E" Series Thermowells (3/4" NPT):
Stem/Insert
Length
3-1/2"/2-1/2"
6"/5"
9"/8"
12"/11"
Brass
Model
E35-75BS
ER6-75BS
ER9-75BS
ER12-75BS
Price
$9.00
$16.00
$97.00
$121.00
304SS
Model
E35-75SS
ER6-75SS
ER9-75SS
ER12-75SS
Price
$52.00
$111.00
$206.00
$258.00
Other lengths, materials & NPT sizes available - consult ITM.
204
M1520E
316SS
Model
E35-75316SS
ER6-75316SS
ER9-75316SS
ER12-75316SS
Price
$104.00
$119.00
$232.00
$311.00
INDUSTRIAL THERMOMETERS
Range
Code
115
125
165
185
245
305
405
555
755
Temp. Ranges
°F & °C
-40 to 110
0 to 120
0 to 160
30 to 180
30 to 240
30 to 300
50 to 400
50 to 550
50 to 750
Features:
• 6" V-shaped gray Valox case
• Wide angle construction allows full scale width for easy reading
• Protective glass cover is retained within the outer edges of the
case
• Spring pressure created by the V-scale secures the glass
against the case and prevents it from rattling
• Red-reading mercury tube is standard
• All brass stem
• Removable socket secured to stem by set-screw
• Standard socket in brass with 1/2" NPT (Sockets also available
with 3/4" NPT)
Model
TL5S2
TL5A2
Description
Straight Form Industrial Thermometer
Angle Form Industrial Thermometer
Price
$41.00
$42.00
Add range code from range table listing. Ex. TL5S2-240 (range
30-240F).
Above model numbers do not include sockets. Order separately.
Thermowells:
Model
SF12-BS
SF34-BS
NPT
1/2"
3/4"
Insertion U
1-3/8"
1-3/8"
Price
$8.00
$23.00
DIGITAL INDUSTRIAL THERMOMETERS
Features:
• Environmentally friendly - mercury free
• Light powered - no batteries (MicrolifeTM Logic)
• Stem assemblies for direct replacement of industrial glass and
bimetal thermometers
• F/C switchable
• Fast response
Specifications
Case:
Range:
Display:
Accuracy:
Resolution:
Recalibration:
Lux Rating:
Update:
Ambient Temp.:
Ambient Temp. Error:
Humidity:
Sensor:
Model
DVU35
DVU6
DVUT35
DVUT6
DVC-4
M1519E
Hi-impact ABS
-50/300° F (-45/150 °C)
1/2" LCD digits, wide ambient formula
1% of reading or 1° whichever is greater
1/10° between -19.9/199.9°F (-28/93°C)
Through case potentiometer adjustment
10 Lux (one foot-candle)
10 seconds
-30 / 140°F (-35 / 60°C)
Zero
100%
Glass passivated termistor
Description
Digital Thermometer, 3-1/2" Stem
Digital Thermometer, 6" Stem
Digital Thermometer w / transmitter
Digital Thermometer w / transmitter
Outdoor Waterproof Cover
Price
$64.00
$73.00
$457.00
$467.00
P.O.A.
205
FOOD SERVICE THERMOMETERS
Model 5911
Model 5972
Model 5983
Features:
Features:
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dishwasher safe
Stainless steel body
2 3/4" dial, 7" stem
Manual temperature indicator
Dual scale: 100 to 400°F (40 to 200°C)
±1 division accuracy, 5° division
Model
Description
Candy/Deep Fry
Dial Thermometer
5911
Price
Dishwasher safe
Stainless steel body
2 1/4" dial, 5 1/2" stem
Manual temperature indicator
Dual scale: 100 to 400°F (40 to 200°C)
±1 division accuracy, 5° division
Model
Description
Candy/Deep Fry
Dial Thermometer
5972
$19.00
Model 5931
Price
Mercury glass thermometer
Stainless steel body
12" long
Adjustable container clip
Dual scale: 100 to 400°F (40 to 200°C)
±1 division accuracy, 2° division
Model
5983
$12.00
Description
Candy/Deep Fry
Dial Thermometer
Price
$23.00
Model 5939
Model 5903
Features:
• Glass/mercury
thermometer
• Stainless steel frame
• Frame folds to 3/4" x
2" x 5" to protect
thermometer
• Range: 100 to 600°F
• ±1 division accuracy, 10° division
Features:
Features:
•
•
•
•
•
•
•
•
•
•
•
•
Hangs or stands
2 1/2" high
Stainless steel construction
Bold numbers for easy reading
Dual scale: 150 to 550°F (75 to 225°C)
±1 division accuracy, 5° division
Model
Description
5931
Oven Dial
Thermometer
Price
Model
Description
5903
Oven Test
Thermometer
$12.00
Price
Dishwasher safe
Stainless steel body
2 3/4" dial, 5 1/2" stem
Manual temperature indicator
Dual scale: 120 to 200°F (65 to 85°C)
±1 division accuracy, 5° division
Model
Description
Price
5939
Meat Dial
Thermometer
$16.00
$50.00
Model 5923
Model 5925
Features:
Features:
•
•
•
•
•
•
• Spirit glass
thermometer
• Hangs or stands
• 4 7/8" long
• Dual scale: -40 to 80°F (-40 to 27°C)
• ±1 division accuracy, 2° division
Hangs or stands
2 1/2" high
Stainless steel construction
Bold numbers for easy reading
Dual scale: -30 to 70°F (-30 to 20°C)
±1 division accuracy, 2° division
Model
5923
206
Description
Refrigerator/Freezer Dial Thermometer
Price
Model
$12.00
5925
M629E
Description
Price
Refrigerator/Freezer Thermometer
$8.00
TEMPERATURE CONTROLLERS
• Comes with brass N.T.C. sensor that can be mounted anywhere by means of a plastic holder that is provided, or fit into a
standard well.
• Sensors are readily interchangeable without any need for
calibrating.
• RWB set of wires emanating from back of unit is provided for
setting “normally-open” (NO) or “normally-closed” (NC) mode.
• LED signal light on face of unit lights up when the relay is
energized. (Relay is de-energized when set point is exceeded).
• High temperature controller, SPC-950-T, supplied with platinum
RTD type sensor encapsulated in stainless steel tubing (1/4" x
6") with 2 feet of insulated wire.
• Other models come complete with solid state (thermistor) type
sensor encapsulated in brass (3/8" x 1-5/8"). Sensor supplied
with 15 feet of reinforcing sleeve.
• Mounts on standard 1900 (4 x 4) electrical box or is adaptable
for panel mounting.
Specifications:
Ranges:
Features:
• Digital display of both setpoint and sensor temperature in big
1/2" digits.
• Controller will continuously display temperature at sensor
location. Press button to display setpoint.
• Setpoint is adjustable by 1° increments via multi-turn knob.
• Solid state circuitry throughout, operating with a precision of
±1°F.
• No capillary tubes at all. The sensor uses plain # wire that can
be cut and spliced to any length up to 500 feet without any loss
of accuracy.
SPC-TEMP: -30° to +250°F;
SPC-950-T: +200 to +950°F
Accuracy:
±1°F
Resolution:
1°F
Input Voltage:
24V AC ±15%
Power Consumption: 4.5VA max.
Output:
S.P.D.T. RWB
Rating:
5A @ 120V AC
Differential Adjust.:
2° to 25°F
Dimensions:
4" x 4" x 1 1/32" (deep)
Model
Description
Price
SPC-TEMP Temperature Controller, -30 to +250°F
$295.00
SPC-950-T Temperature Controller, +200 to +950°F $1178.00
904015
Replacement Probe (max. 250°F)
$101.00
TEMPERATURE SWITCHES
The TS Series microprocessor digital temperature switch includes one input probe and one 8 amp SPDT relay output. This
series is ideal for heating and cooling control and static defrost
timing applications. Both models featurs a 3-digit, red digital display and a NEMA 4 (IP 56) enclosure.
Specifications:
Ranges:
Accuracy:
Resolution:
Input:
Output:
Display:
Model
TS3010
M1097E
-58 to 302°F; -50 to 150°C
±1°C
±1 digit
Thermistor probe w/ 3-ft. (1m) cable
8A SPDTR relay
3-digit red LED
Description
Digital Temperature Controller, °F
Price
$72.00
207
TEMPERATURE SWITCHES
Specifications:
Range:
Accuracy:
Resolution:
Display:
Input:
Output:
-58 to 302°F (-50 to 150°C)
±0.5% of probe range
0.1° < 100°; 1° ≥ 100°
3-digit red LED, 1/2" high digits
Two 1.5" thermistors (1000Ω @ 25°C)
One 8A SPST relay @ 250 VAC, resistive;
alarm 5mA @ 5 VDC
1/3 HP for 8A
110 VAC, 230 VAC or 12V AC/DC
6.2 oz
NEMA 4X (IP65)
HP Rating:
Power Supply:
Weight:
Front Panel Rating:
The TSD Series is designed for application requiring heating or
cooling regulation. The unit includes two probes for temperature
regulating and defrost control, an 8 (3) A SPDT relay output,
alarm output and digital input. The temperature switch features
up to 48 programmable parameters. The user can define operational parameters such as set point, differential hysteresis, time
delay and cycle time via the 3-key keypad. To simplify the programming task, 18 preset configurations can be activated by
changing a single parameter. Access to all parameters, except
the set point, is password protected.
The unit features local indication of the relay output and defrost
status. View ambient or defrosting probe temperature on the
bright red LED display. Error and alarm messages can be viewed
on the display.
Each unit includes two probes, gasket, panel clip, snap-on terminal cover and instruction manual.
Model
TSD-10110
TSD-20110
TSD-21110
TS-5
TS-51
TS-6
TS-61
Description
Temperature Switch, 110VAC, °F
Temperature Switch, 230VAC, °F
Temperature Switch, 230VAC, °C
PVC Probe, 5 ft. (1.5m) cable
PVC Probe, 10 ft. (3m) cable
Metal Probe, 5 ft. (1.5m) cable
Metal Probe, 10 ft. (3m) cable
Price
$135.00
$135.00
$135.00
$14.00
$20.00
$16.00
$23.00
TEMPERATURE SWITCHES
Specifications:
Range:
Accuracy:
Resolution:
Display:
Input:
Output:
HP Rating:
Power Supply:
Weight:
Front Panel Rating:
The TSR Series is designed for cooling regulation in refrigeration
units. Control compressor operation and electric defrost or hot
gas bypass. Dual probe input permits defrost termination by temperature.
Program 44 different parameters including set point, defrosting
cycles, hysteresis, compressor stoppage time, alarms, and digital
input. The digital input allows specialized control for door open/
door closed conditions. Access to all parameters, except for set
point, are password protected.
View temperature, error messaging, and alarms on the bright red
display. Relay and defrost status are indicated on the front panel.
Each unit includes two probes, gasket, mounting hardware, clipon terminal cover, and instruction manual.
208
M1583E
Model
TSR-0110
TSR-1110
TS-5
TS-51
TS-6
TS-61
-58 to 302°F (-50 to 150°C)
±0.5% of probe range
0.1° < 100°; 1° ≥ 100°
3-digit red LED, 1/2" high digits
Two 1.5" thermistors (1000Ω @ 25°C)
One 8A SPST relay @ 250 VAC, resistive;
alarm 20mA @ 12 VDC
1/3 HP for 8A
8-15V AC/DC
6.2 oz
NEMA 4X (IP65)
Description
Temperature Switch, °F
Temperature Switch, °C
PVC Probe, 5 ft. (1.5m) cable
PVC Probe, 10 ft. (3m) cable
Metal Probe, 5 ft. (1.5m) cable
Metal Probe, 10 ft. (3m) cable
Price
$154.00
$154.00
$14.00
$20.00
$16.00
$23.00
THERMOCOUPLE TEMPERATURE SWITCHES
Monitor and control temperature in heating and cooling applications with the Series TCS Thermocouple Switch. The Series
TCS offers a wide temperature range, two selectable alarm sets,
and an internal buzzer indicating alarm condition or error. The
user can define set point, heating/cooling regulation, cycle time,
alarm configuration, load status, and ambient probe adjustment.
The thermocouple switch features password protection and
error/alarm messaging. Temperature and output status is indicated on the bright red LED display. Use the configuration key to
quickly program multiple units. The Series TCS includes a fitting
clip for panel mounting, gasket, rear terminal cover and instruction manual.
Parameters:
Key
SP
r0
r1
r2
d0
c0
c2
P1
P5
H5
A0
A1
A2
A3
A4
A5
A6
A7
Description
Set point
Differential or hysteresis
Lower value set point
Higher value set point
Heating/cooling control
Stop time for load
Load status during probe error
Ambient probe adjustment
Ambient probe type
Parameter access code
Alarm 1 hysteresis
Alarm 1 threshold
Alarm 1 exclusion time
Alarm 1 configuration
Alarm 2 hysteresis
Alarm 2 threshold
Alarm 2 exclusion time
Alarm 2 configuration
Units
Degrees
Degrees
Degrees
Degrees
Option
Minutes
0/1
Degrees
Option
Numeric
Degrees
Degrees
Seconds
Option
Degrees
Degrees
Seconds
Option
Specifications:
Probe Range:
Accuracy:
Resolution:
Display:
Input:
Output:
Horsepower Rating:
Control Type:
Memory Backup:
Power Supply:
Front Panel Rating:
Weight:
Range
r1 to r2
1 to 99°
0 to 999°
0 to 999°
Ht/Co
0 to 59 min.
On/Off
-10 to 10
J, K or S
0 to 255
1 to 999°
0 to 999°
0 to 999
Off, 1 or 2
1 to 999°
0 to 999°
0 to 999
Off, 1 or 2
0 to 999°
±1°F
±1 digit
3-digit red LED, 1/2” (13mm) high digits
Type J, K or S thermocouple
15A relay @ 250VAC resistive
3/4 HP
On/Off
Nonvolatile memory
110/230 VAC or 12 VDC
NEMA 4X (IP65)
2.3 oz (65 g)
Model
Description
TCS-4010
Temperature Switch, Type J, °F, 110V
TCS-4011
Temperature Switch, Type J, °C, 110V
TCS-4020
Temperature Switch, Type J, °F, 230V
TCS-4021
Temperature Switch, Type J, °C, 230V
TCS-4030 Temperature Switch, Type J, °F, 12V AC/DC
TCS-4031 Temperature Switch, Type J, °C, 12V AC/DC
TCS-5010
Temperature Switch, Type K, °F, 110V
TCS-5011
Temperature Switch, Type K, °C, 110V
TCS-5020
Temperature Switch, Type K, °F, 230V
TCS-5021
Temperature Switch, Type K, °C, 230V
TCS-5030 Temperature Switch, Type K, °F, 12V AC/DC
TCS-5031 Temperature Switch, Type K, °C, 12V AC/DC
M1723E
Price
$98.00
$98.00
$98.00
$98.00
$98.00
$98.00
$98.00
$98.00
$98.00
$98.00
$98.00
$98.00
209
TEMPERATURE/HUMIDITY TRANSMITTER
Features:
Specifications:
Temp. Range:
Accuracy:
Output Voltage:
Humidity Range:
Accuracy:
Output Voltage:
Output Load:
0 to 65°C
±0.6°C
10mV/°C; 0°C = 0mV, 50°C = 500mV
5 to 95% RH
±3% RH
10mV/%RH for 0-1V; 0%RH = 0mV,
50%RH = 500mV
10kΩ typical
• Transmits both temperature and relative humidity data to any
controller to provide feedback on user-defined settings
• Easy to setup and operate
• Supplied power from simple VDC circuit
• Mini circular connector (male)
• Pin No. Terminal Name
Description
1
Vcc
2
Gnd
Supply voltage, 6-16V
3
Nc
4
Vt
Temp. output voltage
5
Vh
Humidity output voltage
6
Nc
Model
3520
Description
Price
Temperature/Relative Humidity Transmitter $95.00
TEMPERATURE/HUMIDITY TRANSMITTER
Features:
• Designed to continuously monitor ambient temperature and
humidity
• Transmits both temperature and relative humidity data to any
controller to provide feedback on user-defined settings
• Selectable 4-20mA current or 0-1V, 0-2V, 0-5V outputs
• Easy to setup and operate
• Wall mountable
Specifications:
Model
Supply Voltage:
Output:
Output Load:
Temp. Range:
Accuracy:
Humidity Range:
Accuracy:
Dimensions:
Probe Dimensions:
3501
3511
10-36Vdc
5.3-15Vdc
4-20mA
0-5V
50-1kΩ
100kΩ
0 to 85°C (0 to 185°F)
±1°C/°F
0 to 100% RH
±3% RH
103 x 73 x 31mm
91 x 12mm
Model
Description
3501
3511
210
M1695E
Price
Temperature/Relative Humidity Transmitter $189.00
Temperature/Relative Humidity Transmitter $129.00
THERMISTOR TEMPERATURE LOGGERS
Specifications:
ELECTRICAL
Number of Channels:
Measurement Range:
Input Connections:
Resolution:
Accuracy:
Sample Rate:
Storage Technique:
Data Storage:
Power Supply:
Battery Life:
Output:
Indicators:
Applications:
•
•
•
•
•
•
•
Ambient temperature monitoring
HVAC troubleshooting
Computer room monitoring
Food storage
Wave soldering temperature profiling
Process control monitoring
Refrigerated freight
Controls:
MECHANICAL
Dimensions:
Weight (with battery):
Mounting:
Model
Description
Price ENVIRONMENTAL
Operating Temperature:
2114.17 L605
SimpleLogger® Internal/External Thermistor
$292.00
Storage Temperature:
2114.19
Thermistor Probe w/Epoxy Bead, 6 ft. (2114.17) $69.00
Relative Humidity:
2114.20
Thermistor Probe w/4" SS Sheath, 6 ft. (2114.17) $97.00
Safety:
1
(Internal) -20 to 100°C, -4 to 212°F
(External)-20 to 100°C, -4 to 212°F
Inline connector
8 Bit
1% of reading ±0.25°C
4096/hr max, decreases by 50% each
time memory is full
Time extension recording™ (TXR™)
8192 readings
9V alkaline battery
Up to 1 yr of recording @ 25°C
RS-232 via DB9 connector
Red LED double flashes in LOGGING,
single flashes in STANDBY, and is off in
OFF mode
One button used to start and stop
recording sessions and to turn the data
logger on and off
2-7/8 x 2-5/16 x 1-5/8” (73 x 59 x 41 mm)
5 oz (140g)
Base plate mounting holes or Velcro®
pads
-4 to +158(F (-20 to +70(C)
-40 to +174(F (-40 to +80(C)
5 to 95% non-condensing
IEC1010, 30V, Cat. III
THERMISTOR TEMPERATURE LOGGERS
Specifications:
Number of Channels:
Measurement Range:
Input:
Input connections:
Resolution:
Accuracy:
Sample Rate:
Storage Technique:
Data Storage:
Power:
Battery Life:
Output:
Indicators:
Controls:
Applications:
• Process Control monitoring
• Wave soldering
• Refrigeration monitoring
MECHANICAL
Size:
1
2116.15 - +32 to +1380°F (0 to +750°C)
2116.16 - -325 to +2280°F (-200 to +1250°C)
2116.17 - -325 to +660°F (-200 to +350°C)
J, K or T thermocouple (varies by model)
Miniature color coded thermocouple jacks
12 bit, better than 0.5°C
0.5 % R + T/C Accuracy
4096/hr maximum
Time Extension Recording™ (TXR™)
8192 readings
9V Alkaline battery
1 year of continuous recording @ 25°C
RS-232 via DB9 connector
Red LED flashes once every 2 seconds in
STANDBY mode, twice every 2 seconds in
LOGGING mode, and is off in OFF mode
One membrane switch used to start and
stop recording sessions and to turn the
data logger on and off
2-7/8” W x 2-5/16”H x 1-5/8”D
(73.0 x 58.75 x 41.27 mm)
5 oz (140g)
Base plate mounting holes or Velcro® pads
supplied loose
Weight:
Price Mounting:
2116.15 L610 SimpleLogger®, Temperature, J Thermocouple $300.00
2116.16 L620 SimpleLogger®, Temperature, K Thermocouple $300.00 ENVIRONMENTAL
2116.17 L630 SimpleLogger®, Temperature, T Thermocouple $300.00 Operating Temperature: -4 to +158°F (-20 to +70°C)
Storage Temperature: -4 to +174°F (-20 to +80°C)
*All thermocouple Temperature SimpleLoggers® are supplied with software (3 1/2" disk),
Safety:
IEC1010, 30V, Cat. III
Model
Description
6 ft. DB9 RS-232 serial cable & 9V battery.
M2377E
211
TEMPERATURE DATA LOGGERS
Features:
• Single channel mini temperature data logger
• Displays current reading, Max/Min values, programmed limit
values and battery life in days
• Up to 3900 readings can be saved
• Entire memory can be read out in only 10 seconds
• Watertight housing (IP65)
• ComSoft 3 Basic Windows-compatible software facilitates
graphs and tables, prints data, smoothes measurement curves,
targeted value observation using crosshair function as well as
logger programming and setting of limit values
• Data transfer via serial interface
Specifications:
Temperature Range:
Resolution:
Accuracy:
Data Capacity:
Measuring Cycle:
Power Supply:
Battery Life:
Sensor Type:
Dimensions:
Model
0563.1741
0563.1742
-20 to 160°F
0.1°F
±0.8°F: -20 to -4°F; ±0.5°F: -4 to 104°F;
±0.8°F: 104 to 106°F
3900 sample values
Selectable, 1 minute to 4 hours
CR2032 lithium battery
500 days (typical)
NTC thermistor
2 x 1.4 x 5”
Description
Price
Mini Temperature Data Logger
$87.00
Data Logger w/ ComSoft 3 Basic,
$189.00
wall holder, interface w/ PC connection cable
TEMPERATURE/HUMIDITY DATA LOGGERS
Specifications:
Temperature Range:
Accuracy:
Humidity Range:
Accuracy:
Data Capacity:
Power Supply:
Software:
Model
TM121
A015
A708
A712
R157
X025
X050
N100
N300
N520
Features:
• Real time monitoring and graphing
• Large digital display (0.9” numerals) with min/max at the
touch of a button
• 9V battey operation (approx. battery life - 1 year)
• 25 accuracy from 0-60% RH
212
M1722E
32 to 120°F (0 to 50°C)
±1.8°F
0-95% RH (non-condensing)
±2% from 0 to 60% RH,
±3% from 61 to 95% RH
20,160 sample points
9V battery with 1 year battery life
(typical) or 120V AC adapter
(not included)
Microsoft Windows 3.1, 95, 98 &
NT compatible (Y2K compliant)
Description
Temperature & Humidity Data Logger
with Digital Display
Data Logger Software & Interface Cable
(required for operation)
Carrying Case
Wall Mount Case
AC Adapter
25’ extension cable for remote monitoring
50’ Extension cable for remote monitoring
NIST Traceable Calibration, 1-Pt
NIST Traceable Calibration, 3-Pt
Certificate of Validation
Price
$478.00
$111.00
$63.00
$43.00
$48.00
$120.00
$136.00
$159.00
$238.00
$63.00
TEMPERATURE DATA LOGGER
Features:
•
•
•
•
•
Dual channel operation - internal/external sensor
Optional probe connection for external channel
One or both channels may be enabled
Continuous operation - No On/Off switch
Easy to use Windows™ software reads, displays, graphs and
prints recorded data via IBM or compatible PC
• Data Logger Package includes recorder, software and interface
cable
Specifications:
Range:
Accuracy:
Sensor:
Data Storage:
Sample Rate:
Power Supply:
Battery Life:
Dimensions:
-22 to 122°F (-30 to 50°C) non-condensing
Better than ±0.5°F (±0.25°C) @ 77°F/25°C
Thermistor
Single Channel: 12-bit stored, 21,800
sample points
Dual Channel: 12-bit stored, 10,900
sample points
Records data in configurable 10 second
intervals
Lithium battery (3.6V)
10-year life at 1 minute sampling
2.8 x 2.1 x 7" (71 x 53 x 18 mm)
Model
D100
A130
A140
Description
Temperature Data Logger
Data Logger Software & Interface Cable
Remote Temperature Probe
Price
$446.00
$159.00
$207.00
TEMPERATURE/HUMIDITY DATA LOGGER
Features:
• Stores 21,500 sample points
• Small enough to fit in your pocket
• Ideal for discreet monitoring - no keypad, display chart or pens
to be tampered with
• Performs months of unattended monitoring - retrieve data
when it's convenient for you
• Incredible 10 year battery life makes remote site monitoring
worry free
• Easy integration of recorded data into your word processing
documents and spreadsheets
Specifications:
Temp. Range:
Extended Range:
Temp. Accuracy:
Temp. Sensor:
Humidity Range:
Humidity Accuracy:
Humidity Sensor:
Software:
Data Capacity:
Power Supply:
Battery Life:
Dimensions:
-30 to 50°C, -22 to 122°F (non-condensing)
-30 to 70°C, -22 to 158°F
Better than 0.5°F @ 75°F & 0.25°C @ 25°C
Better than ±0.35°C (0.63°F) from 50 - 70°C
(122 - 158°F)
Thermistor
10% to 90% RH (non-condensing)
±2% over RH range @ 25°C/75°F
±4% over RH range @ 50 - 70°C
(122 -158°F)
Capacitative Polymer
Windows™ 3.1, Windows™ '95, Windows™
NT compatible
Single Channel: 21,500 sample points
Dual Channel: 10,750 sample points
Lithium battery (3.6V)
10-year average life
2.8 x 2.1 x 7" (71 x 53 x 18 mm)
Dual channel operation measures temperature and relative
humidity or just temperature with internal sensors
Model
D200
A130
M602E
Description
Temperature/RH Data Logger
Data Logger Software & Interface Cable
Price
$719.00
$159.00
213
TEMPERATURE/HUMIDITY DATALOGGERS
Features:
• Nothing is more compact; they’re smaller than a deck of cards
• Loggers continuously monitor unattended for months, while
chart recorders require chart replacement at least once a week
• Logged data is stored and viewed on your PC. Zooming in on
particular portions of data, viewing data from several loggers on
one graph, exporting data into other programs, and e-mailing
data are all standard and easy to use functions
• Allows for real time monitoring
• It’s the most affordable way to monitor
Temperature & Humidity
TP120
TX120
Temperature only
SP100
SX100
Dual Channel Temperature
SP120
SX120
Battery Life (typical):
5 years
1 year
5 years
1 year
5 years
1 year
Sample Point Storage:*
32,512
7,680
32,512
7,680
32,512
7,680
0% to 95%
25% to 95%
±2% RH
±5% RH
-40 to 248°F
-40 to 248°F
Humidity Range:
Humidity Accuracy:
Remote Temp. Range:
Remote Temp. Accuracy:
±1.8°F (-4 to 176°F) ±2.25°F (32 to 176°F)
Temperature Range:
-40 to 176°F
Temperature Accuracy:
±1.8°F, >14°F ±2.25°F, >14°F ±1.8°F, >14°F ±2.25°F, >14°F
Dew Point (Calculated):
√
User Calibration:
√
Dimensions:
-40 to 176°F
40 to 176°F
-40 to 176°F
-40 to 176°F
-40 to 176°F
±1.8°F, >14°F
±2.25°F, >14°F
√
√
√
3.1” x 2.1” x .9” (79 mm x 53 mm x 23 mm)
*Sample points are a Logger’s storage capacity. For example, the SP100 Temperature Data Logger can store up to 32,512 sample
points. If you request a temperature sample every minute, it would record for 22.5 days before filling the memory, recording every two
minutes would take 45 days to fill, and so on. You can set the sample rate from 10 seconds to 24 hours in 10-second increments.
Model
TP120
SP120
SP100
TX120
SX120
SX100
A015
A150
214
Description
Price
Pro Series Temp./RH Data Logger
$302.00
Pro Series Dual Channel Temp. Data Logger*$350.00
Pro Series Temperature Data Logger
$191.00
Temperature/Humidity Data Logger
$222.00
Dual Channel Temperature Data Logger $350.00
Temperature Data Logger
$143.00
Logger Software & Download Cable
$111.00
Remote Temp. Probe (for SX120 & SP120) $48.00
M2183E
Model
Description
SW400
A715
A713
N100
N300
N400
N520
Calibration Software
Locking Wall Mount Case (small)
Water Resistant Pouch
NIST Traceable Calibration, 1-Pt.
NIST Traceable Calibration, 3-Pt.
A2LA Accredited Calibration, 3-Pt.
Certificate of Validation
Price
$398.00
$79.00
$63.00
$159.00
$238.00
$414.00
$63.00
TEMPERATURE/HUMIDITY DATA LOGGERS
Totally self-contained, self-powered and self-sufficient!
Security eyelet
Jack for
interface
cable
Removable
screw-type
terminal block
Features:
Model
ACR-JR
SR-001
• Designed for automatically recording temperature, relative
humidity, electric current, pressure or industry standard process
variables
• Powered by a ten year lithium cell
• Capable of storing over a year's worth of readings
• Easy-to-use interface cable and software for IBM PC or
compatibles
• Supplied with a mounting hole and convenient magnetic backing
• So small, you can hide it just about anywhere!
SR-002
SR-003
SR-004
SR-005
SR-008
Description
Single Channel Temperature Logger
2-Channel Temperature Logger
(1 internal, 1 remote)
4-Channel Data Logger
(temp., RH & options)
4-channel Data Logger
(1 temp. & 3 current)
5-channel Data Logger
(temp., RH & pressure option)
3-Channel Data Logger
(temperature & T/C)
8-Channel Temperature Logger
Internal
Thermistor
temperature
sensor
Price
$189.00
$419.00
$769.00
$679.00
$689.00
$449.00
$729.00
Common Specifications:
Internal Thermistor Temperature Sensor (all models)
Range:
-40° to +70°C (-40° to +158°F)
Resolution:
0.4°C (0.7°F)
Operating Limits:
-45 to +70°C (-50 to +160°F); 0-90% R.H.
Power Supply:
3.6 V lithium battery (10 years life)
Memory Size:
32,768 readings
Sampling Methods: 1. Continuous (first-in, first-out)
2. Stop when full ( fill-then-stop)
Sampling Rates:
User selectable rates from every 8 seconds
to once a week
Resolution:
8 bits (1 part in 256)
Software:
TrendReader® for DOS V3.0 or later,
Trend Reader® for Windows® V3.1 or
later
Dimensions:
4.2" x 2.9" x 0.9" (107 x 74 x 22 mm)
Weight:
5 oz. (110 g)
SOFTWARE & CABLES
TR-WIN-SR
TrendReader for Windows®
IC-101
TrendReader Computer Cable
$189.00
$119.00
PROBES & SENSORS
ET-016
General Purpose Temp. Probe (20' cable) $99.00
ET-016-SMP
Temp. Probe w/ 1.25" Stainless Tip
$75.00
Low Temp. Penetration Probe (10' cable) $150.00
ET-004
ET-081
High Temperature Probe (18" cable)
$75.00
ET-086
Oven Temperature Probe (18" cable)
$75.00
EH-020A
Temperature & RH Probe
$219.00
Current probe (5, 25, 100 & 250A)
$242.00
A60FL
Note: for temperature ranges and other data, contact us.
Loggers also available in 12-bit versions...call for prices.
Other probes available...call for information.
M814E
215
TEMPERATURE RECORDERS
Specifications:
RECORDING
Pen Type:
Pen Colour:
Chart Size:
Chart Drive:
Chart Rotation:
Chart Span:
INPUTS
Input
Thermocouple
Disposable fiber tip
Pen 1 - Red; Pen 2 - Green
10 inch
Stepper motor
User configurable; 8-hour, 12-hour, 24-hour
or 7-day
Bottom & top of span, -9999 to 9999 units
Type
Range
J
0°C to 70°C
0°F to 1400°F
K
0°C to 1360°C
0°F to 2500°F
T
-200°C to 400°C -330°F to 750°F
R
200°C to 1650°C 400°F to 3000°F
S
200°C to 1650°C 400°F to 3000°F
RTD
100Ω
-140°C to 400°C -220°F to 750°F
Platinum .00385 ohms/ohm/°C
Current DC
0 to 20mA, 4 to 20mA; Internal 4.7Ω Shunt
Resistor
Voltage DC
0 to 25mV, 0 to 50mV, 10 to 50mV, 0 to 5V,
1 to 5V
INPUT PERFORMANCE
Measurement Error:
Type J, K, T, R, S & RTD: ±0.25% of span
±1°; mA, mV & VDC; ±0.25% of scaled
span + 1 LSD
Cold Junction:
± 0.2°C @ 25°C
Compensation Error:
0.04°C/°C deviation from 25°C
Linearization Error:
TCs: ± 0.25°C typical. ± 0.5°C worst case
RTDs: ±0.1°C typical, ± 0.3°C worst case
Ambient Temp. Error: ±0.01% of span/°C deviation from 25°C
POWER REQUIREMENTS
Line Voltage:
90-264 VAC, 50/60 Hz
Power Consumption: 18 VA max.
CONSTRUCTION
Enclosure:
Injection molded Noryl case and cover with
acrylic window
NEMA Rating:
NEMA 3 standard
Mounting:
Panel or wall
Overall Dimensions
14’ wide x 14” high x 3.8” deep
(355.6 x 355.6 x 96.5mm)
Panel Cutout:
12.7” x 12.7" (322.6 x 322.6mm)
Panel Depth:
2.5” (63.5mm)
Panel Protrusion:
1.3” (33.0mm)
Weight:
15 lbs. max.
ALARMS
Number
Up to two process alarms for each of two
inputs
Type:
Process high or low
Limit Devices:
Optional high/low limits for each input with
latching output; Normally open output
latches open; Red reset button included to
the right of the display
Hysteresis:
Fully adjustable, 0 to 200 units, single
sided
Security:
Alarm setpoint changes can be prohibited
Sensor Fault Action:
Alarms work normally in “Hi” and “Lo”
conditions
RELAY OUTPUTS
Relays:
SPST, contacts rated 5A resistive at
115VAC, 2.5A resistive at 230VAC, 1/8 HP
at 230VAC (single phase), 250VA at
115/230 VAC
216
Features:
•
•
•
•
•
•
•
1 or 2 trend pen versions
4 digit red LED display
High/Low limit capability available
Universal Inputs
Up to 2 alarms per pen
Universal power supply
Communications
Model
51000011
51100011
60500402/5
Description
1 Channel Temperature Recorder
2 Channel Temperature Recorder
Replacement Pens, 5-pack red
Price
$1066.00
$1445.00
$42.00
Recording Charts, box of 100
M2327E
Range
0 to 100
0 to 200
0 to 400
0 to 1000
0 to 2000
30 to 230
Price
12-hr Model
24-hr Model
7-day Model
00213824
00213819
00214410
00213831
$35.00
00213825
00213801
00213802
00213820
00213810
00213832
$35.00
00213826
00213806
00213807
00213821
00213805
00213834
$35.00
TEMPERATURE RECORDERS
Features:
Model SK4
• Direct sensing, no remote probe, place entire recorder in
cooler, chamber or work area
• Records temperature on 4” diameter chart
• Operates for one full year on a single “AA” battery
• Model SL4 features a digital display
• Includes battery, pen, 60 charts, and 1-Pt. NIST Traceable
Certificate of Calibration
Specifications:
Accuracy:
Display Accuracy:
Recording Times:
Chart Size:
Avg. Response Time:
Dimensions:
±2% full scale
±2°F (±1°C)
24-hour or 7-day
4” diameter circular chart
11 minutes to move 63% of full scale
7 x 5.5 x 2.5" (178 x 140 x 64 mm)
Model
Description
Carrying Case
A708
700-022200
Pens, 6 red
3-Pt. NIST Traceable Calibration Certificate
N300
Price
$63.00
$42.00
$238.00
Model SL4
Temp. Range
Recording Time
SL4 Model
Price
Model SK4
Price
-20 to +120°F
-20 to +120°F
0 to +100°F
+45 to +90°F
-30 to +50°C
24-hour
7-day
7-day
7-day
7-day
SL4120F24
SL4120F7
SL4100F7
SL490F7
SL4350C7
$366.00
$366.00
$366.00
$366.00
$366.00
SK4120F24
SK4120F7
SK4100F7
SK4350C7
$318.00
$318.00
$318.00
$318.00
Chart No.
C015
C017
C012
C070
C181
Price
$34.00
$34.00
$34.00
$34.00
$34.00
TEMPERATURE RECORDERS
Features:
• 3" (75 mm) diameter recording charts
• Dual range capability (depending on chart installed)
• Special ranges for refrigerators, freezers, incubators and
ambient conditions
• Optional tamper seals to insure chart integrity
• Free standing, suspended or wall-mounted
• Rugged case ideal for transportation applications
• Includes battery, pen, and 5 °F & 5 °C recording charts
The SC3 sets a new standard for a compact size recorder while
providing the accuracy and resolution required for regulation
compliance and quality control uses. The reuseable SC3 is
rugged enough to withstand the rigors of the transportation
industry or versatile enough to document temperature in warehouses, incubators, freezers or refrigerators.
Recording °F
°C
Model Time
Range
Range
SC312 24-hour
-14 to 32
-25 to 0
-14 to 32
-25 to 0
SC317 7-day
SC322 24-hour
+4 to 50
-15 to 10
SC327 7-day
+4 to 50
-15 to 10
+22 to 68
-5 to 20
SC352 24-hour
SC357 7-day
+22 to 68
-5 to 20
SC332 24-hour
+50 to 96
+10 to 35
+50 to 96
+10 to 35
SC337 7-day
SC347 7-day
+76 to 122 +25 to 50
Order charts for your specific range
Specifications:
Temperature Sensor:
Accuracy:
Resolution:
Response Time:
Recording Time:
Power Supply:
Dimensions:
Weight:
Spiral wound bimetal
±2°F (±1°C) over full scale
Not less than 1"/+55°F in 1°C or 2°F steps
11 minutes to move 63% of scale in air
moving at 5 ft. per second
24-hour or 7-day
One "AA" battery, up to 1 yr. average life
3.7 x 3.7 x 2.2" (93 x 93 x 53 mm)
0.5 lb. (227 g)
M759E
Price
$191.00
$191.00
$191.00
$191.00
$191.00
$191.00
$191.00
$191.00
$191.00
°F
Chart
C301
C302
C303
C304
C319
C320
C305/A
C306
C308
°C
Chart
C309
C310
C311
C312
C317
C318
C313
C314
C316
Price
$39.00
$39.00
$39.00
$34.00
$39.00
$39.00
$34.00
$39.00
$39.00
217
RECORDERS/DATA LOGGERS
Features: Model CR4
• Two pen, remote reading, multifunction chart recorder
• Interchangeable accessory sensors customize instrument to
fit every application - simply plug them in
• Remote sensor
• Recorder automatically recognizes and controls whichever
sensors are attached
• Records data from 1.5 hours to 31 days
• Touch pad provides simple operation
• Backlit LCD alphanumeric display
• Front panel selection of °F or °C
• All settings retained during power off and power loss, no need
to restore settings from power failure
• Battery backup to continue operation during power failure
• 12 Volt operation allows use in vehicular or marine applications
• Two independent channel alarms
• Selectable alarm delay
• Audible and visual alarm indication
• Normally open relay contacts for remote alarm applications
• Probe is field replaceable and calibrated with no special
equipment
• Chart number displayed when time and temperature ranges
are selected
• Front panel selectable single or continuous chart rotation
• Optional RS-232 serial port for computer interface
• Low battery warning on display
• Includes 60 assorted 6" diameter charts
Model CR4
Specifications: Model CR4
Temp. Alarm Range:
R.H. Alarm Range:
Pressure Alarm Range:
Alarm Delay Range:
-40 to 130°F (-40 to 55°C)
0 to 100% R.H.
0 to 500 PSI (0 to 35 BAR)
User selectable - NO DELAY, 10 min.,
30 min., 1 hr. & 2 hrs.
Remote Alarm Connection: Normally open contacts, 48V AC/DC,
0.1A resistive load
Chart Rotation Mode:
User selectable - continuous or single
turn
Chart Rotation Speed:
User selectable - 1.5, 3, 6, 12, & 24
hours, 7 & 31 days
Chart Speed Accuracy:
±1%
Chart Diameter:
6" circular chart (15.3 cm)
Display:
Alphanumeric backlit LCD, 16 char. x
2 lines
Power Supply:
Primary: 115 VAC, 50/60 Hz
Alternate: 12VDC operation w/ adapter
Battery Backup:
8 "AA" alkaline batteries
Battery Life:
48 hours continuous operation
Features: Model SL4
• Dual function capability - use as a conventional hand held
instrument or to record and store data for future use
• Logger automatically recognizes each probe and adapter, and
becomes 5 different data loggers in one instrument
• Remote probes provide versatile operation for any logging
application
• Menu driven operation, setup on-site without a computer
• View recording instantly, or print data without the need of a
computer by connecting to a parallel printer
• Records data up to 40 days
• Includes Windows™ 95 software for data analysis, review
and storage. Cables for printer and computer available as
individual accessories.
218
Model SL4
Specifications: Model SL4
Recording Time:
Power Supply:
Memory:
Display:
Printer Interface:
Software:
Cables:
Dimensions:
Weight:
Model
CR4
SL4
1.5 hours to 40 days
Primary: 115 VAC, 50/60 Hz adapter
Backup: 9V alkaline battery for 24 hours
of operation
Alternate: 12 VDC
16K non-volatile memory
Alphanumeric backlit LCD, 6 characters x
2 lines
Parallel centronics compatible printer port
3 1/2" diskette (supplied)
6 feet long
5 1/8" x 3 1/2" x 1 1/2" (130 x 89 x 38 mm)
10 oz. (284 g)
Description
Price
Universal Chart Recorder
$605.00
Service Logger
$484.00
Must purchase a sensor kit with Logger or Recorder
KTH Temperature, Humidity & Dewpoint Sensor Kit $292.00
Dual Temperature Sensor Kit
$292.00
KTT
KTP
Temperature & Pressure Sensor Kit
$504.00
KTE
Temperature & Event Sensor Kit
$292.00
Dual Pressure Sensor Kit
$935.00
KPP
M756E
TEMPERATURE RECORDERS
The KT6 series recorders feature panel mount and wall mount
capability, a DIN compatible enclosure, AC power with battery
back-up, programmable recording times and temperature ranges.
Additional features are available including digital display, audible
alarm and a SPST alarm/relay contact. Whether you need to
record temperature in a high temperature oven or a low
temperature freezer, the KT6 series offers complete flexibility
and valuable features.
Features:
•
•
•
•
•
•
Selectable ranges
Digital display
Alarm relays
Audible alarm
Standard type K input
Battery back-up
Specifications:
Enclosure Dimensions:
7 9/16” x 7 9/16” x 3 1/4”
(182mm x 182mm x 83mm)
Panel Cut-out Dimensions: 6.9” x 6.9” (188mm x 188mm)
Depth Behind Panel:
2.0” (51mm)
Power:
120V 50/60 Hz or 240V 50/60 Hz
Battery Back-up:
One 9V alkaline battery
Battery Back-up Life:
up to 24 hours
Power Status:
LED indicator
Power Cord:
6’ (2m), cord with wall transformer
Recording Time:
(user selectable) 24 hour or 7 day
Alarm Contacts:
24V/0.5A SPST normally open
contact with independently
adjustable maximum and
minimum set points
Audible Alarm:
User selectable maximum and
minimum set points (set in
conjunction with alarm contacts)
Digital Display:
3 1/2 digit LCD
Temperature Ranges:
(user selectable) 0 to -100
(F or C), 0 to -50 (F or C),
-50 to 50 (F or C), 50 to 100
(F or C), 0 to 100 (F or C),
0 to 250 (F or C), 0 to 500 (F only)
Sensor Compatibility:
Standard K Thermocouple,
probe required
Recorder Accuracy:
+/- .5% of chart range +/- 1.8F
(1C) (Recorder only)
User Calibration:
Adjustable zero point
Chart Size:
6” (150mm) diameter
Case Construction:
Rugged black ABS
Keypad Functions:
On/Off, pen home, time adjust,
alarm set (available) and calibration
Display Resolution:
(available) 0.1 resolution -9.9 to
199.9, 1 resolution above 200
and below -9.9
Accessories Included:
Pen, battery, 60 charts and bead
wire temperature probe (KT602 &
KT603 include 1 pt NIST
Traceable Certificate of Calibration)
Model
Description
KT601
KT602
KT603
Temperature recorder, 120VAC
Temperature recorder with display, 120VAC
Temperature recorder with display,
audible alarm & relay contacts 120VAC
Temperature recorder, 240VAC
KT605
KT606
Temperature recorder with display, 240VAC
Temperature recorder with display,
KT607
audible alarm & relay contacts 240VAC
700-022200
Pack of six red pens
M2170E
Replacement Charts
Model
Temp. Range
Recording Time
C651
C652
C653
C654
C655
C656
C657
C658
C659
C660
C661
C662
7-day
24-hour
7-day
24-hour
7-day
24-hour
7-day
24-hour
7-day
24-hour
7-day
24-hour
-50 to 50 F/C
-50 to 50 F/C
0 to 50 F/C
0 to 50 F/C
50 to 100 F/C
50 to 100 F/C
0 to 100 F/C
0 to 100 F/C
0 to 250 F/C
0 to 250 F/C
0 to 500F only
0 to 500F only
Price
$478.00
$638.00
$797.00
$638.00
$797.00
$957.00
$42.00
Price
$34.00
$34.00
$34.00
$34.00
$39.00
$39.00
$34.00
$34.00
$34.00
$34.00
$39.00
$39.00
219
TEMPERATURE/HUMIDITY RECORDER
Features:
• Large LCD simultaneously displays temperature and
humidity or temperature and
dewpoint
• 8" diameter chart
with 1° and 1%
RH resolution
• All the recording
parameters are
set using a keypad and dip
switches change them as
often as need
• Audible and visual alarms let you
know when high
or low limits are exceeded
• Sensing probe is on 15-feet of cable
• Probe is small enough to be placed into cramped chambers
• Free standing with snap-on feet or wall mounting (keyholes)
Specifications:
Temperature Ranges: -20 to 120°F, 40 to 100°F
-20 to 50°C, 5 to 40°C
Accuracy:
±1.8°F (±1.0°C)
Humdity Range:
0 to 99% RH
Accuracy:
±2% between 10 and 90% (at 73°F, 23°C)
Response Times:
Temp.: 30 seconds for 63% step change
at 1 CFM; RH: 20 seconds for 63% step
change at 1 CFM
Recording Times:
1, 7 & 31 days
Battery Life:
1-day recording mode = 1 month;
7-day recording mode = 2 months;
31-day recording mode = 3 months
Model
THDx
Description
Temperature/RH/Dewpoint Recorder
Price
$1037.00
REMOTE SENSING TEMPERATURE RECORDERS
All KTx recorders accept K-thermocouple probe with miniconnector plug, so each unit serves as many recorders in one. If your
workplace requires that you document temperatures for a variety
of precison applications, KTx is the one remote recorder that will
do the job.
The KTx family includes three models. Each model includes: bead
wire probe (KTx); high temperature basic probe (KTxE); AC
adapter, batteries; pen, box of 60 recording charts (0 to -100°C/°F,
7-day); and 1-Pt. NIST traceable calibration certificate.
Specifications:
Ranges:
Model KTx:
-50 to +50°F/°C, 0 to +100°F/°C, 0 to +250°F/°C
0 to 500°F only (user selectable)
Model KTxE:
0 to +250°F/°C, 0 to +500°F/°C,0 to +1000°F/°C
0 to +2000°F only (user selectable)
Temp. Accuracy: ±0.3% of reading ±1°C (±1.8°F)
Recording Times: 24-hour, 7-day, 31-day (user selectable)
Chart Size:
8" diameter
Model
Description
Price
KTx
Mid Range Remote Sensing Recorder
$1037.00
KTxE
High Range Remote Sensing Recorder
$1229.00
Accessories
700-022200
Pens (6 red)
$42.00
D617
10 ft. Straight Extension Cable
$79.00
1/8" Compression Fitting (for D164 & A203) $143.00
A791
D164
6" Stainless Steel Probe, +1650°F
$159.00
D605
4" Piercing Probe, +1650°F, 5' cable
$111.00
D608
5" Immersion Probe, +1650°F, 5' cable
$127.00
6" High Temperature Probe, +2100°F
$191.00
A203
1600C
Carrying Case
$295.00
N300
3-Pt. NIST Calibration
$238.00
Recording Charts
Range
Model KTx
-50 to +50°F/°C
0 to +100°F/°C
0 to +250°F/°C
0 to +500°F only
Model KTxE
0 to +250°F/°C
0 to +500°F/°C
0 to +1000°F/°C
0 to +2000°F only
Probes D164 & A203 come with 4' leadwire
220
M639E
24-hour
7-day
31-day
Price
C411
C410
C432
C428
C414
C412
C439
C459
C406
C409
C407
C408
$34.00
$34.00
$34.00
$34.00
C432
C428
C441
C443
C439
C459
C440
C444
C407
C408
$34.00
$34.00
$34.00
$39.00
RECORDING THERMOMETERS
Compact size (4" diameter x 3-1/4" height) and spring-wound
operation make this recorder completely portable. Because it is
spring activated, it will operate in extreme temperatures where
batteries would fail. It is designed to withstand rugged environments and rough handling, and may be used in any position.
Each clock is electrically timed and its sensor is calibrated for
accurate operation over the entire temperature range. Recorder
values are accurate to within ±2% of full scale.
Model
Range
24-hour Recording Period
616-160F24
-40° to +160°F
0° to +100°F
616-100F24
616-220F24
+20° to +220°F
616-40C24
-15° to +40°C
616-105C24
-5° to +105°C
7-day Recording Period
616-160F7
-40° to +160°F
616-100F7
0° to +100°F
+20° to +220°F
616-220F7
-40° to +70°C
616-70C7
616-40C7
-15° to +40°C
-5° to +105°C
616-105C7
100 Recording Charts
615-CHART
A choice of temperature ranges (from -40 to +220°F) and recording periods make this dry-stylus Temperature Recorder suitable
wherever controlled-temperature monitoring is needed. The basic
components include a special chart driving clock with key, a
bimetallic heat sensing element, a stainless steel stylus, and a
pressure-sensitive paper chart. The explosion proof clock movement is spring-wound and protected against dust and moisture.
One winding is sufficient to drive the chart beyond its full recording period, whether 24 hours or 7 days.
Price
$788.00
$788.00
$788.00
$788.00
$788.00
$788.00
$788.00
$788.00
$788.00
$788.00
$788.00
$42.00
Please specify recording period and temperature range when
ordering charts.
TRANSIT TEMPERATURE RECORDERS
Features:
• Water resistant sleeve encases recorder and protects it from
shock and bumps of shipping
• Failsafe start-up: pull tab removes information copies and
starts recorder
• One-of-a-kind wire and crimped lead seal prevents tampering
• Unique one step information entry system carbon copies
directly to chart
• Air flow channels promote rapid temperature response
• Mounting tape gives firm grip on irregular surfaces
This single use transit temperature recorder is perfect for proving
the integrity of shipments with temperature critical storage parameters. Simply pull the starting tab to activate recording and the
instrument will document temperatures continuously for 5, 10 or
20 days. This temperature recorder comes with a crimped seal
that prevents tampering with documented information on the
chart. It's low cost and compact size makes this instrument a convenient, economical tool for all on-the-job temperature recording.
Specifications:
Temperature Sensor:
Accuracy:
Recording Times:
Chart Size:
Ambient Conditions:
Power Supply:
Dimensions:
Weight:
Spiral-wound bi-metallic strip transducer
±1°F (±0.6°C): 10 to 70°F (-12 to 21°C)
5-day, 10-day, 20-day
32" to 43"; 3/16" wide pressure sensitive
strip chart
-20 to 135°F; 0 to 98% RH non-condensing
One "AA" alkaline battery
7.2 x 5.75 x 2.1" (18.3 x 14.6 x 5.4 cm)
20 oz. (567 g)
Model
D300
D301
D302
D303
D304
D305
M1724E
Temperature
Range
-20 to +100°F
-20 to +100°F
-20 to +100°F
-30 to +37.5°C
-30 to +37.5°C
-30 to +37.5°C
Recording
Time
5-day
10-day
20-day
5-day
10-day
20-day
Price
$52.00
$52.00
$52.00
$52.00
$52.00
$52.00
221
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement