advertisement
USB VGA Docking Station
USER MANUAL
C
ONTENTS
.............................................................................................. 3
................................................................................................ 3
........................................................................ 3
.............................................................................. 3
.......................................................... 4
: .......................................... 4
.................................................... 5
............................................................. 5
......................................... 7
....................................................... 9
7 ................................................................. 10
........................................................... 10
....................................... 13
..................................................... 14
............................................................................ 15
............................................................................... 15
...................................................................................... 15
.............................. 15
Smart Display Device ID Detection
........................................ 15
Fast Access to Display Resolution Setting
......................................................................... 16
.............................................................................. 16
...................................................................... 18
................................................. 18
.......................................................................... 18
......................................................................... 20
General Recommendation ...................................................................... 20
...................................................................... 22
USB VGA D
OCKING
S
TATION
I
NTRODUCTION
Thanks for purchased the USB VGA Docking Station – a USB 2.0 Universal Docking
Station. The adoption of USB 2.0 interface allows the USB VGA Docking Station to virtually work with your PC or notebook. It does not only replicate the common PC
Input/ Output interface, a standard VGA port is also supported. It is ideal for portable
PC users with small LCD display as it could support a second display with up to 1600 x1200 resolutions. This easy-to-use solution is committed to provide productivity, expandability and connectivity to both home and office environment.
F
EATURES
USB 2.0 Compliant
Plug-and-Play USB connectivity
Support display resolution up to UXGA 1600 X 1200, WSXGA+ 1680 x 1050
Support Function
Display Modes: Primary, Extended, Mirror
Display Rotation:
0°, 90°, 180°, 270°
Friendly software features targeted to ease daily USB Display experience
Identify Monitors
Multi-Display Control Panel
Shortcut to access Windows Display Settings dialog
4 x USB 2.0 self-powered ports
RJ45 10/100Mbps Ethernet
Standard VGA (DB15) connector to support additional display device
Stereo audio output (Speaker/Headphone) and monaural audio input (Microphone)
S
YSTEM
R
EQUIREMENTS
Available USB 2.0 port
Minimum Requirement:
CPU: Intel/AMD Single Core 1.2 GHz or higher processor
RAM: 512MB memory or higher
(Higher processor and memory recommended for optimal performance)
Windows XP / Vista / 7 (32-bit or 64-bit)
P
ACKAGE
C
ONTENTS
USB VGA Docking Station
USB 2.0 A to Mini B type cable
AC Power Adapter
CD (User Manual, Driver and Utility)
Quick Installation Guide
3
USB VGA D
OCKING
S
TATION
Aspect Ratio
4:3
16:10
16:10
16:10
4:3
16:9
5:4
4:3
16:10
15:9
16:9
4:3
4:3
4:3
H
ARDWARE
D
RIVER
S
ETUP
P
ROCESS
Please do not plug the USB VGA Docking Station into the computer system before the driver is completely installed.
Follow these steps to quickly install your new USB VGA Docking Station
1. Insert the driver CD and follow the instructions to install the device driver.
2. Connect the 2 nd
monitor to the VGA (DB15) connector of USB VGA Docking
Station
and switch it on.
3. Connect the AC power adapter to USB VGA Docking Station, then plug the
USB VGA Docking Station into an available USB port of your computer. The device driver will be configured automatically.
4.
To make sure the USB VGA Docking Station worked correctly, please reboot the computer. After reboot, you will see two icons on the lower right toolbar on Windows XP/Vista, or an icon
”Super Utility” under the
“Shown hidden icons” on Windows 7. And the extended display on the 2 nd monitor. The USB VGA Docking Station is ready to use now.
S
UPPORTED
C
OMMON
D
ISPLAY
R
ESOLUTION
:
Resolution
1600 * 1200
1680 * 1050
1600 * 900
1440 * 900
1400 * 1050
1360 * 768
1280 * 1024
1280 * 960
1280 * 800
1280 * 768
1280 * 720
1152 * 864
1024 * 768
800 * 600
Color Bits
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
16, 32
Monitor refresh frequency
60
60
60
60
60
60
60
60
60
60
60
60
60 , 75
60 , 75
4
USB VGA D
OCKING
S
TATION
I
NSTALLATION ON
W
INDOWS
XP/V
ISTA
D
EVICE
D
RIVER
I
NSTALLATION
Installing the device driver enables your computer‟s operating system to recognize the
USB VGA Docking Station and its ports once it‟s connected. Please check your operating system and refer to the appropriate installation procedure to begin installing the device driver.
This section illustrates the simple device driver installation procedure for computer running Windows XP operating system. Please make sure the USB VGA Docking
Station is unplugged from your Notebook or PC before executing the setup program.
Step 1.
Insert the accompanied CD into the CD-ROM drive; the setup program should be launched automatically. If setup program does not begin automatically, click
StartRun, and enter “D:\setup.exe” (where D: is the path of your CD-ROM drive)
and then click OK.
Step 2
.
Driver Installation Wizard, click
“Next” to continue.
Step 3.
License Agreement; please review it and check “I accept the
terms of the license
agreement.” Click “Next” to
accept the License Agreement.
5
USB VGA D
OCKING
S
TATION
Step 4.
Setup is searching for installed features…...
*You may notice the screen flashes during hardware installation. It is part of the normal process.
Step 5.
Click “Finish” to complete the setup, and insert the USB VGA
Docking Station into an ailable
USB port of your computer.
The device driver will be configured automatically. .
Step 6. Reboot the system
To make sure the USB VGA Docking
Station worked correctly, please reboot the computer. You will see two icons on the lower right toolbar, and the extended display will be shown on the attached display device. The USB VGA
D
OCKING
S
TATION
is ready to use now.
6
USB VGA D
OCKING
S
TATION
V
ERIFYING
D
EVICE
D
RIVER
I
NSTALLATION
The following procedure allows you to verify the device driver installation.
Please right click “My computer”→ “Properties” →“Hardware” → “Device
Manager”.
Connect the USB
VGA D
OCKING
S
TATION
, then double click “Display adapters”,
“Network adapter”, “Sound, video and game controllers”, and “Universal Serial
Bus controllers”.
Begin verification by making sure highlighted devices were added to the system.
7
USB VGA D
OCKING
S
TATION
8
USB VGA D
OCKING
S
TATION
D
EVICE
D
RIVER
U
N
-
INSTALLATION
Step 1.
Start menu:
Please click “Start” →
“Control Panel”→ Add or
Remove Programs”.
Classic start menu:
Please click “Start” →
“Settings”→ “Control
Panel”→ “Add or Remove
Programs”.
Select “Installer for USB
Graphics Device & LAN
11.x.x.xxxx.0185 (driver version number)” item. Click “Remove” button.
Step 2.
Unplug the USB VGA D
OCKING
S
TATION and click “OK” to continue.
Step 3.
Select “Yes, I want to restart my
computer now” and click
“Finish” to reboot.
After reboot, you will complete the driver un-installation.
9
USB VGA D
OCKING
S
TATION
I
NSTALLATION ON
W
INDOWS
7
D
EVICE
D
RIVER
I
NSTALLATION
Installing the device driver enables your computer‟s operating system to recognize the docking station and its ports once it‟s connected. Please check your operating system and refer to the appropriate installation procedure to begin installing the device driver.
This section illustrates the simple device driver installation procedure for computer running Windows 7 operating system. Please make sure the USB VGA Docking
Station is unplugged from your PC or Notebook before you run the setup program.
Step 1.
Insert the accompanied CD into the CD-ROM drive; the setup program should be launched automatically. If setup program does not begin automatically, click
StartRun, and enter “D:\setup.exe” (where D: is the path of your CD-ROM drive)
and then click OK.
Step 2.
Driver Installation Wizard, click
“Next” to continue.
Step 3.
License Agreement; please review it and check “I accept
the terms of the license
agreement.” Click “Next” to
accept the License Agreement.
10
USB VGA D
OCKING
S
TATION
Step 4.
Setup is searching for installed features…..
*You may notice the screen flashes during hardware installation. It is part of the normal process.
Step 5.
Select “Yes, I want to restart
my computer now”, and click
“Finish” to complete the driver installation.
Step 6. H
ARDWARE
D
EVICE
D
RIVER
I
NSTALLATION
(after system reboot)
Please connect the 2 nd
monitor to the VGA (DB15) connector of USB VGA Docking
Station
and switch it on. And, connect the AC power adapter to USB VGA Docking
Station.
Then plug the USB
VGA D
OCKING
S
TATION
into an available USB 2.0 port of your PC or Notebook. The device driver software setup will begin automatically.
After the driver is configured, you could click
“Show hidden icons” and see an icon o n the taskbar. The extended display will be shown on the 2 nd
monitor. The USB Docking
Station is ready to use now.
11
USB VGA D
OCKING
S
TATION
If the extended display come out with the blind screen, please right click on the desktop of your system, it will pop up a screen and select “Screen resolution”
(a)
, or
go to “START”→ “Control Panel”→ “Appearance and Personalization”→
“Adjust screen resolution”
(b)
. Then, select “Extend these displays”
(c)
on the
Display Property.
12
USB VGA D
OCKING
S
TATION
V
ERIFYING
D
EVICE
D
RIVER
I
NSTALLATION
The following procedure allows you to verify the device driver installation.
Please right click “Computer”→ “Properties” → “Device Manager”.
Connect the USB
VGA D
OCKING
S
TATION
, then double click “Network adapter”,
“Sound, video and game controllers”, and “Universal Serial Bus controllers”.
Begin verification by making sure highlighted devices were added to the system.
13
USB VGA D
OCKING
S
TATION
D
EVICE
D
RIVER
U
N
-
INSTALLATION
Step 1.
Start menu:
Please click “Start” →
“Setting”→ “Program and
Features”.
Classic Start menu:
Please click “Start” →
“Settings”→ “Control
Panel”→ “Program and
Features”.
Select “Installer for USB Graphics Device & LAN 11.x.x.xxxx.0185 (driver version number)” item. Click “Uninstall” button.
Step 2.
Click “OK” to continue.
Step 3.
Select “Yes, I want to restart my
computer now” and click
“Finish” to reboot.
After reboot, you will complete the driver un-installation.
14
USB VGA D
OCKING
S
TATION
F
UNCTION
D
ESCRIPTION
This section describes the main functions provided by the USB VGA Docking
Station.
USB
TO
E
THERNET
It can support the 10/100Mbps LAN transfer, and it is compliant IEEE802.3u
100BASE-TX and IEEE802.3 10BASE-T.
USB
TO
A
UDIO
It can support one Microphone input and one Stereo Speaker output. An external microphone device can be connected to record the voice, and connect to the Speaker to output the voice or music.
A
CCESS
USB
TO
VGA D
ISPLAY
D
EVICE
U
TILITY
Look for the icons on the lower right toolbar on
Windows XP/Vista or the icon Super Utility under the “Shown hidden icons” on
Windows 7.
Right-click the icon to access the variety of functions associated to the USB VGA
Docking Station.
D
ISPLAY
ID
–
Smart Display Device ID Detection
The USB VGA Docking Station supports
VESA defined DDC/EDID. The utility could show the display device ID whenever it is attached to the USB VGA
Docking Station.
If there is no display device attached to the
USB VGA Docking Station, an “Unknown
Monitor” ID will be shown. In some
cases, the attached display device does not support EDID, the ID will also defined as
“Unknown Monitor”.
15
USB VGA D
OCKING
S
TATION
D
ISPLAY
R
ESOLUTION
–
Fast Access to Display Resolution Setting
The default setting resolution is:
1024 * 768 * 32bit.
D
ISPLAY
R
OTATION
4 options available: “0°, 90°, 180°, 270° under the Extended or Primary display modes. It is a useful function for some rotatable display device.
D
ISPLAY
M
ODES
“E
XTENDED
”
MODE
(D
EFAULT
)
A default display mode; this feature allows the attached USB Display enabled display device to work as “Extended” display of the on-board screen. The extended working space improves work efficiency.
You may change the relative position of this extended USB Display enabled display device under the Display Settings.
16
USB VGA D
OCKING
S
TATION
“M
IRROR
”
MODE
This feature allows the same contents of on-board screen to be displayed
(mirroring) to the USB Display enabled display device.
The screen resolution setting on the
USB Display enabled device will follow the on-board screen‟s resolution. For example, if the onboard screen‟s resolution is
1024x768x32bit, and the USB
Display enabled device will set as the same resolution.
“P
RIMARY
”
MODE
A unique feature to allow USB Display enabled device to act as the main working display. The USB VGA Docking Station will work as the main graphics adapter of the system. The on-board screen will work as the extended display.
Please be advised that some display utility and drivers that shipped with certain AGP and built-in display adapters may prevent this option from working on some systems. You may disable the other utility program (usually found in the same toolbar located on the bottom right hand corner) to make this function work properly.
“O
FF
”
MODE
This option disables the video output from USB
VGA D
OCKING
S
TATION
.
17
USB VGA D
OCKING
S
TATION
I
DENTIFY
M
ONITORS
Easy display identification via a serial number will be showed on the upper right corner of all attached display devices.
M
ULTI
-D
ISPLAY
C
ONTROL
P
ANEL
An unique feature to allow much quicker and simpler working experience under multi-display environment. A series of hotkey to quickly move active window or cursor to the desired display device
(either on-board or each USB Display enabled devices).
The default setting of hotkeys can be found on the Hotkey List of “Multi-
Display Control Panel”.
For example: Ctrl + 2 means: to move the window to the Display 2.
D
ISPLAY
S
ETTINGS
Fast access to the system “Display
Settings”.
18
USB VGA D
OCKING
S
TATION
Q & A
This section describes the common Q&A regarding to the installation or operation of the
USB VGA D
OCKING
S
TATION
.
Q: Why can‟t I make the USB VGA D
OCKING
S
TATION
the primary display?
A: Some video cards ship their product with a utility that prevent other video cards from being set as the primary card. Check the bottom right hand corner taskbar for the utility.
Disable the utility before switching our adapter to be the primary display.
Q: Why won‟t my DVD player work when I move it over to the extended display?
A: Some DVD playback software packages do not support playing on a second display adapter of any kind. You may try to open the program in the secondary display first before playing the DVD.
Q: How come my video will not play on Media Player if I move it over to the extended desktop?
A: Check that you have moved the Media Player window completely over to the second screen. Also, make sure to set the Aero mode on Windows 7.
Q: Why does my mouse not move pass the right side of the screen as it should on extended desktop?
A: Check the display settings and make sure that your display number „2‟ is on the right side of display number „1‟. You can rearrange how Windows treats each display in relation to each other in the Display Properties Settings.
Q: There are lines running horizontally up and down my screen.
A: This is due to a low refresh rate setting. You can change this in the Display Properties
Settings Advanced Monitor. Make sure you select the
USB VGA D
OCKING
S
TATION first and not set the refresh rate higher than what your monitor can support. This may damage your monitor. You can also try to reset/refresh/resynchronize your monitor.
Q: Direct X 3D does not work?
A: This is a limitation of the USB VGA Docking Station on Windows XP/Vista except for Windows 7.
19
USB VGA D
OCKING
S
TATION
T
R O U B L E S H O O T I
N
G
T
I
I
P
S
This section describes the general troubleshooting tips regarding to the installation or operation of the USB D
ISPLAY
D
EVICE
.
Known Issues
- Direct 3D is not supported on Windows XP/Vista. It supported under Windows 7 Aero mode.
General Recommendation
- Check to make sure that the device is plugged in correctly to the host system.
- Make sure that the USB port that you are using is USB 2.0.
- Unplug the USB cable of USB graphics device and re-insert it.
- Check to see that the monitor is connected correctly and is powered ON.
- Make sure to restart your computer after the driver installation.
- Try a different USB 2.0 port and/or computer.
- Unplug all other USB devices from the system.
- Try connecting the USB cable of USB graphics device directly to the computer instead of through a hub.
- Reset/refresh/resynchronize your monitor.
Media Playback
- During video playback on all platforms, please do not change the display mode, position or arrangement of video player window (such as dragging the video player window between main display and attached display). This usually causes the video player to have strange behavior and the video may stop playing. We suggest stopping the video playback, moving the window to the USB graphics device attached display and then selecting the video clip to start playing.
- You may experience poor video performance on USB graphics device attached display under some low-spec PC system.
- Video rendering using hardware overlays is supported.
- Some DVD playback software packages do not support playing on a second display adapter of any kind. You may try to open the media player in the secondary display first before start playing the DVD.
- Your PC may be lack of certain video codec to support playback of certain video format.
Please use the link below to install license free media codec.
20
USB VGA D
OCKING
S
TATION
K- Lite: http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
- Video/Media players have different decoding capability under different display modes. For better performance on watching DVD or certain video format on the USB graphics device attached display, it is recommended to use the following license free software.
VLC Media Player: http://www.videolan.org/vlc/
Media Player Classic: http://sourceforge.net/projects/guliverkli/
Others
- Some graphics card, i.e. Intel, prevents other secondary graphics chipset from being set as the primary card. As the result of this, primary mode might not work or the display maybe disabled.
- If you have problems during the boot up process, start your computer in Safe Mode and uninstall the driver. Hold the CTRL key until the Windows startup menu appears and select
Safe Mode.
- To verify the driver version that you installed, please click “Control Panel” → “Add or
Remove Programs” to check the program: Installer for USB 2.0 VGA & LAN
11.x.x.xxxx.0185 (the number means the driver version).
- Please contact your dealer to obtain the latest driver or for additional assistance if needed.
- Some limitation exists in different media player on file format support. We enclose our compliance test result in the tables according to different operating system, main system graphics card/chipset, media players, and the supported media format. It will be updated periodically with new version of media players or our latest driver.
21
USB VGA D
OCKING
S
TATION
R
EGULATORY
C
OMPLIANCE
FCC
This equipment has been tested and found to comply with Part 15 of the FCC rules for the Class B
Device.
Operation is subject to the following two conditions:
• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesired operation.
CE
This equipment is in compliance with the requirements of the following regulations:
EN 55022: 2008-05 Class B,
EN 55024 : 2003-10
EN 61000-4-2: 2001-12,
EN 61000-4-3: 2006-12,
EN 61000-4-4: 2005-07,
EN 61000-4-5: 2007-06,
EN 61000-4-6: 2001-12,
EN 61000-4-11: 2005-02
C-Tick
This equipment is in compliance with the requirements of the following regulations:
AS/NZS CISPR22: 2006, Class B.
VCCI
This equipment is in compliance with the requirements of the following regulations:
Class B
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer.
Copyright© 2011 Magic Control Technology Corp. All rights reserved. All trade names are registered trademarks of their respective owners.
Features and specifications are subject to change without notice. Product may not be exactly as shown in the diagrams.
22
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 :
- 10 7
- 20 Known Issues
- 20 General Recommendation
- 20 Media Playback
- 21 Others