User manual | Dynasty® 280 Series

Issued Dec. 2016 • Index No. AD/4.9
Dynasty 280 Series
®
Quick
Specs
Industrial Applications
Processes
Precision fabrication
Heavy fabrication
Pipe and tube fabrication
Aerospace
Aluminum ship repair
Anodized aluminum fabrication
AC/DC TIG (GTAW)
Pulsed TIG (GTAW-P)
Stick (SMAW)
Air carbon arc (CAC-A)
TIG/Stick Welding
Power Source
Input Power 208–575 V, 1-phase or 3-phase power
Amperage Range 1–280 A (DC)
2–280 A (AC)
Rated Output 200 A at 28 V, 60% duty cycle
Net Weight 52 lb. (23.6 kg)
Update and expand. Front panel
memory card data port provides
the ability to easily update software
and expand product features.
AC TIG Features
Balance control provides adjustable
oxide removal which is essential
for creating the highest quality
aluminum welds. DX models provide
extended ranges.
Frequency controls the width of the
arc cone and can improve directional
control of the arc.
Visit MillerWelds.com/TIGSoftware
for the latest software updates
and expansions.
Pro-Set™ eliminates the guesswork
when setting weld parameters.
Use Pro-Set when you want the
speed, convenience and confidence
of preset controls. Simply select
the feature and adjust until
Pro-Set appears on the display.
Sleep timer conserves electricity.
This programmable feature will power
down the machine if it sits idle for a
specific time.
Allows for any input voltage hookup
(208–575 V) with no manual linking,
providing convenience in any job setting.
Ideal solution for dirty or unreliable power.
Cooler Power Supply (CPS) is an
integrated 120-volt dedicated-use
receptacle for the Coolmate™ 1.3.
Available on select models, see page 6.
AC Waveforms
Dynasty 280
Dynasty 280 DX
Meter calibration allows digital meters to be calibrated
for certification.
Wind Tunnel Technology™ protects internal electrical
components from airborne contaminates, extending the
product life.
DC TIG Features
Fan-On-Demand™ power source cooling system operates
only when needed, reducing noise, energy use and the
amount of contaminants pulled though the machine.
AC/DC Stick Features
Cooler-On-Demand™ feature operates the
auxiliary cooling system only when needed,
reducing noise, energy use, and airborne
contaminants pulled through the cooler.
Insight Core.™ Internet-based solution that monitors and
reports welding activity for basic productivity and quality
measures. DX models only.
Note: Cooler-On-Demand is only available on
CPS models.
Insight Centerpoint.™ Advanced solution that drives
productivity and ensures weld quality by providing
real-time weld operator feedback and machine control.
DX models only.
Blue Lightning™ high-frequency (HF)
arc starter for non-contact arc initiation.
Provides more consistent arc starts and
greater reliability compared to traditional
HF arc starters.
Advanced squarewave,
fast freezing puddle, deep
penetration and fast travel speeds.
Soft squarewave for a soft
buttery arc with maximum
puddle control and good wetting action.
Sine wave for customers that
like a traditional arc. Quiet with
good wetting.
Triangular wave reduces the
heat input and is good on thin
aluminum. Fast travel speeds.
Exceptionally smooth and precise arc
for welding exotic materials.
DIG control allows the arc characteristics to be changed for specific
applications and electrodes. Lower
the DIG setting for smooth running
electrodes like E7018 and increase
the DIG setting for stiffer, more
penetrating electrodes like E6010.
Hot Start™ adaptive control provides
positive arc starts without sticking.
AC frequency control adds stability for
smoother welds when AC Stick welding.
Stick-Stuck detects if the electrode is
stuck to the part and turns the welding
output off to safely and easily remove
the electrode. Menu selectable.
Power source is warranted for three years, parts and labor.
Miller Electric Mfg. Co.
Equipment Sales US and Canada MillerWelds.com
An ITW Welding Company
1635 West Spencer Street
P.O. Box 1079
Appleton, WI 54912-1079 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Specifications (Subject to change without notice.)
Welding
Amperage
Range
Rated Output
3-phase
2–280 A (AC)
1–280 A (DC)
235 A at 19.4 V,
60% duty cycle
19
17
10
9
7
7.0
6.7
1-phase
2–280 A (AC)
1–280 A (DC)
235 A at 19.4 V,
60% duty cycle
33
30
17
15
12
6.9
6.8
3-phase
5–280 A
200 A at 28 V,
60% duty cycle
22
20
11
10
8
8.2
7.9
1-phase
5–280 A
180 A at 27.2 V,
60% duty cycle*
34
31
17
15
12
7.1
7.0
Welding
Mode
Input
Power
TIG
(GTAW)
Stick
(SMAW)
Amps Input at Rated Load Output, 50/60 Hz
208 V 230 V 400 V 460 V 575 V KVA KW
Max. OpenCircuit
Voltage
60 VDC
(11 VDC**)
Dimensions
H: 13.6 in. (346 mm)
W: 8.6 in. (219 mm)
D: 22.5 in. (569 mm)
Net
Weight
52 lb.
(23.6 kg)
55 lb.
(25 kg)
with CPS
*Refer to owner’s manual for 208 V output ratings and duty cycle. **Low OCV sense voltage for stick and Lift-Arc ™ TIG.
IP23 rating — This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.
Operating temperature range is 14 to 104° F (-10 to 40° C). Storage temperature range is -22 to 149° F (-30 to 65° C). Portions of the preceding text are contained in
EN 60974-1: “Welding power sources for arc welding equipment.”
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
All CE models conform to the applicable parts of the IEC 60974 series of standards.
Performance Data
Input
Power
TIG (GTAW)
Duty Cycle
Stick (SMAW)
Duty Cycle
AC TIG Material
Thickness Range
DC TIG Material
Thickness Range
Stick Electrode
Maximum Diameter
Carbon Arc Gouging
(CAC-A) Maximum
Generator
Requirement
3-phase
280 A, 25%
235 A, 60%
200 A, 100%
280 A, 15%
200 A, 60%
160 A, 100%
0.012 – 3/8 in.
(0.3 – 9.5 mm)
0.004 – 3/8 in.
(0.1– 9.5 mm)
6010: 1/4 in. (6.4 mm)
7018: 7/32 in. (5.6 mm)
7024: 3/16 in. (4.8 mm)
3/16 in. (4.8 mm)
12.5 kW
1-phase*
280 A, 25%
235 A, 60%
200 A, 100%
280 A, 10%
180 A, 60%
160 A, 100%
*Refer to owner’s manual for 208 V output ratings and duty cycle.
Coolmate 1.3 Cooler
™
• Dynasty® models with CPS turn Coolmate 1.3
on and off
• Power indicator light
• Fluid level sight window
• Rustproof polyethylene-molded coolant tank
and filler spout
• 1/4 hp motor is thermally protected to guard
against overheating
2
• Efficient fin and tube heat exchanger
• Factory-set pressure relief valve (55 psi)
maintains consistent pressure during operation
• Filter and coolant filling spout are conveniently
located
• Brass-body, positive displacement rotary vane
pump provides consistent coolant flow and
pressure rating with long pump-life expectancy
Input Power
Maximum Current Draw
Maximum Cooling Capacity
Rated Cooling Capacity
Tank Capacity
Dimensions
Net Weight
115 V, 60 Hz
4.7 A (60 Hz)
3,400 W (11,600 Btu/hr.)
3.8 qt./min. (3.6 L/min.)
1,330 W (4,540 Btu/hr.)
1.1 qt./min. (1 L/min.)
1.3 gal. (4.9 L)
H: 11.25 in. (286 mm)
W: 10.375 in. (264 mm)
D: 24 in. (610 mm)
43 lb.
(20 kg)
Weldcraft W-280 (WP-280) TIG Torch
™
• Two-piece torch head and exclusive Super Cool™
Technology provides additional surface area to
increase cooling efficiency and capacity
• Torch body includes an anti-rotation feature
and multi-position locking to prevent handle
movement during welding and improve
operator control
• Secure mechanical fittings and connections
minimize leakage
Cooling Method
AC Rating
DC Rating
Consumables
Electrode Range
Cable
Water-cooled
195 A, 100% duty cycle
280 A, 100% duty cycle
13N
.020 –1/8 in. (0.5 – 3.2 mm)
Three-piece
TIG Upgrade Chart
Why Upgrade?
Syncrowave 250 UPGRADE Dynasty 280 UPGRADE Dynasty 280 DX
Dynasty 280 Benefits
Thickness Capacity
.015 – 3/8 in. aluminum
.012 – 3/8 in. steel
.012 – 3/8 in. aluminum
.004 – 3/8 in. steel
The Dynasty 280 has a lower bottom end, and can weld
thinner metals.
200 A, 60%
235 A, 60%
Weld longer at higher amperages. At 200 A the
Dynasty 280 can weld continuously.
Continuous HF
Start only HF
HF on start only limits HF interference issues during
the weld.
Digital and dial %
All digital
Precise adjustments can be made with all-digital
controls for greater quality control and repeatability.
Confusion on Where
to Set the Controls?
Trial and error
Pro-Set™ eliminates the guesswork when
setting weld parameters.
Select the feature and adjust until Pro-Set appears in
display. Pro-Set is available for Balance, Frequency,
Pulse and DIG parameters.
AC Frequency Control
(Aluminum TIG)
Fixed at 60 Hz
Variable 70 –150 Hz
Variable 20 – 400 Hz
Higher frequencies provide better arc control and faster
travel speeds.
AC Balance Control
(Aluminum TIG)
45 – 68%
electrode negative
60 – 80%
electrode negative
50 – 99%
electrode negative
Greater electrode negative helps to produce welds with
less etching for more aesthetic looking welds.
AC Waveforms
(Aluminum TIG)
Soft squarewave
Soft squarewave
Advanced squarewave
Soft squarewave
Sine wave
Triangular wave
Duty Cycle
High Frequency
Arc Starting
Precision Controls
Weld Aluminum with
Pointed Tungsten
(Aluminum TIG)
Portability
Power Flexibility
Line Draw at
200 Amps
Insight
Advanced squarewave = Travel faster
Soft squarewave = Maximum puddle control
Sine wave = Traditional characteristics
Triangular wave = Reduced heat input
Extended Frequency and Balance controls permit welding
aluminum with pointed tungsten. The benefits are reduced
heat input into your part, smaller weld beads, better
starting, more control of the arc and faster travel speeds.
378 lb. (172 kg)
crane or cart
52 lb. (23.6 kg)
carry or cart
Manual link, 208/230/460 V
1-phase only
Auto-Line™, 208 – 575 V
1-phase or 3-phase
Auto-Line allows the unit to operate on any voltage.
1-phase or 3-phase. Even generators!
77 A, 230 V, 1-phase
25 A, 230 V, 1-phase
15 A, 230 V, 3-phase
Line requirement to operate is much less. Smaller
electrical service needed, smaller breaker/fuses and
power cord.
N/A
N/A
Insight Core™
Insight Centerpoint™
Easier to move because of size and weight. Don’t have to
wait for a crane operator.
Ensures weld quality, records and maintains weld data
and tracks productivity.
3
Dynasty 280 Control Panel
®
7
1
8
2
9
3
4
10
5
11
12
6
13
1. Standby Switch
7. Memory Card Port
2. Voltmeter Display
8. Activity Indicator
3. Ammeter Display
9. Encoder Control
4. Output Contactor “On” Indicator
10. Menu Ranges
5. AC TIG Process Menu Parameters
Amperage
2 – 280 A**
Balance*
60 – 80%
Frequency*
70 –150 Hz
Postflow
Auto/Off – 50 seconds
11. DC TIG Process Menu Parameters
Amperage
1–280 A**
Pulse*
Off–250 PPS
Postflow
Auto/Off–50 seconds
6. AC Stick Process Menu Parameters
Amperage
5 – 280 A
DIG*
Off –100%
12. DC Stick Process Menu Parameters
Amperage
5–280 A
DIG*
Off–100%
13. Process Selector
*Pro-Set parameter selectable. **Amperage range is tungsten size dependent.
User Menu (Hold Menu button three seconds.)
Tech Menu (Hold Menu button five seconds.)
AC TIG
1. Start = HF/Lift Arc
2. Tungsten Size = .020 –1/8 in. or .05 – 3.2 mm
3. Remote Trigger = STD/HOLD/OUTPUT ON
1. Arc Time
AC Stick
1. Hot Start = ON/OFF
2. Remote Trigger = OUTPUT ON/STD
DC TIG
1. Start = Lift Arc/HF
2. Tungsten Size = .020 –1/8 in. or .05 – 3.2 mm
3. Remote Trigger = STD/HOLD/OUTPUT ON
DC Stick
1. Hot Start = ON/OFF
2. Remote Trigger = OUTPUT ON/STD
4
0.0–9,999 hours
0.0–59 minutes
0–999,999 cycles
Resettable
2. Error Log = Error event recorder
3. Sleep Timer = 1/5/10/15/30/45MIN/1HR
4. Stick Stuc = OFF/ON
5. OCV = LOW/NORM
6. Cooler Power = AUTO/OFF (only on Dynasty models with CPS)
7. Machine Reset
8. Software Number
9. Serial Number
Dynasty 280 DX Control Panel
®
1
8
9
2
10
3
11
1. Standby Switch
2. Voltmeter Display
3. Ammeter Display
4. Polarity
5. Process/
Arc Starting
6. Output Control
4
12
5
6
7
13
14
AC/DC
TIG: HF impulse, Lift-Arc
Stick: Adaptive Hot Start
Standard remote,
2T trigger hold,
Output on
7. Pulser Control
Pulses per Second* DC : 0.1– 500 PPS
AC : 0.1– 500 PPS
Peak Time*
5 – 95%
Background Amps* 5 – 95%
8. Memory Card Port
9. Activity Indicator
10. Encoder Control
11. Amperage Button
12. AC Waveshape
Balance*
50–99% EN
Frequency*
20–400 Hz
13. Gas/DIG
Preflow
0.0–25.0 seconds
Postflow
Auto/Off–50 seconds
DIG*
Off–100%
14. Sequencer Control
Initial Amps
AC: 2–280 A
DC: 1–280 A
Initial Time
0.0–25.0 seconds
Initial Slope
0.0–50.0 seconds
Weld Time
0.0–999 seconds
Final Slope
0.0–50.0 seconds
Final Amps
AC: 2–280 A
DC: 1–280 A
Final Time
0.0–25.0 seconds
*Pro-Set parameter selectable.
User Menu (Press Gas and Amperage buttons.)
Tech Menu (Hold Gas and Amperage buttons five seconds.)
1. Tungsten Size = .020 –1/8 in./GEN or .05 – 3.2 mm
2. Remote Trigger = 3T/4T/4TL/4TLE
3. Wave Form = SOFT/ADVS/SINE/TRI
4. Stick Hot Start = ON/OFF
1. Arc Time
0.0–9,999 hours
0.0–59 minutes
0–999,999 cycles
Resettable
2. Error Log = Error event recorder
3. Sleep Timer = 1/5/10/15/30/45MIN/1HR
4. Stick Stuc = OFF/ON
5. OCV = LOW/NORM
6. Weld Timers = OFF/ON
7. Cooler Power = AUTO/ON/OFF (only on Dynasty models with CPS)
8. Locks = OFF/1–4
9. Meter Display
10. External Pulse Control = OFF/ON
11. Machine Reset
12. Software Number
13. Serial Number
14. Insight (DX with Insight model only)
5
Dynasty 280 Models/Packages
®
Build an
Air-Cooled
Package
Select desired
stock number
for each step.
907550
Dynasty shown.
301311
kit shown.
Step #1 • Select Dynasty
Dynasty 280
Dynasty 280 (CPS)
Dynasty 280 DX
Dynasty 280 DX (CPS)
Dynasty 280 DX w/Insight (CPS)
907550
907537
907551
907514
907514003
Step #2 • Select Contractor Kit
Note: For models without the
Cooler Power Supply (CPS),
the Coolmate 1.3 must be
powered through an external
120-volt facility power.
Dynasty comes with adjustable shoulder strap, 8 ft. power cord (no plug),
quick reference guide and two 50 mm Dinse-style connectors.
Build a
Water-Cooled
Package
Select desired
stock number
for each step.
Foot Control Contractor Kit
Fingertip Control Contractor Kit
See page 7 for kit contents.
907537002
Dynasty 280
TIGRunner® shown
with four bottles
of 043810
Low-Conductivity
Coolant.
194744 remote shown.
Step #1 • Select Dynasty TIGRunner® and Coolant
Dynasty 280 (CPS) TIGRunner
Dynasty 280 DX (CPS) TIGRunner
Dynasty 280 DX w/Insight (CPS) TIGRunner
&
Low-Conductivity Coolant
(Must be ordered in quantities of four.)
300990 kit shown.
Step #2 • Select Remote Control
907537002
907514001
907514004
043810
Dynasty TIGRunner comes with 8 ft. power cord (no plug),
quick reference guide, Coolmate™ 1.3 and Small Runner™ cart.
Wireless Foot (recommended)
RFCS-14 HD Foot
RCC-14 E/W Fingertip
RCCS-14 N/S Fingertip
RMS-14 Pushbutton
RMLS-14 Momentary/Maintained
RHC-14 Hand
Wireless Hand
See page 7 for remote descriptions.
Water-Cooled
Packages
Use a single stock number
to order a complete
preconfigured system.
301309
301311
300429
194744
151086
043688
187208
129337
242211020
300430
Step #3 • Select Torch Kit
W-250 Kit
300185
W-280 Kit
300990
(recommended for 280 model)
W-375 Kit
301268
See page 7 for kit contents.
Select Water-Cooled Complete Package
951468
package shown.
Dynasty 280 (CPS) Complete with Foot Control
Dynasty 280 DX (CPS) Complete with Foot Control
Dynasty 280 DX (CPS) Complete with Wireless Foot Control
951466
951468
951469
Comes with:
• 8 ft. power cord (no plug)
• Quick reference guide
• Coolmate™ 1.3 300972
• Coolant (4 one-gallon bottles of 043810)
• Small Runner™ cart 301318
• Remote control 194744 (foot) OR remote control 300429 (wireless foot)
• W-280 torch kit 300990 (see page 7 for contents)
6
Genuine Miller Accessories
®
Weldcraft™ A-200 (WP-26)
TIG Torch
WP-26-12-R (12 ft.)
WP-26-25-R (25 ft.)
200-amp air-cooled torch.
Torch body gas valve
models also available.
Protective Cover 301382
Fits Dynasty 210/280 and Maxstar 280.
Small Runner™ Cart 301318
Designed for Dynasty/Maxstar
210 and 280 with or without
Coolmate 1.3 cooler. Cart features
single-cylinder rack, foot pedal
holder, two cable/torch holders,
and two TIG filler rod holders.
Coolmate™ 1.3
300972 120 V
1.3-gallon cooler designed to
cool torches up to 280 amps.
Note: A-200 (WP-26) torches require 195379 connector.
Air-Cooled TIG Torch
Connectors
195379 A-200 (WP-26)
195378* All others
50 mm Dinse-style for one-piece air-cooled torch.
*A-80 (WP-24) torches require 24-5 connector.
Performance TIG Gloves
263345 X-Small
263346 Small
263347 Medium
263348 Large
263349 X-Large
Completely unlined, goat grain
leather with triple-padded palm.
Memory Cards
Memory Card Expansion
301151 14-Pin Automation Expansion
Provides the ability to access common automation
functions through the 14-pin connection.
301152 14-Pin Modbus® Expansion
Provides the ability to access basic and advanced
functions through the 14-pin connection.
301235 Independent AC Expansion
Allows EP and EN amperages and waveforms to
be set independently to precisely control heat
input to the work and electrode.
Memory Card (Blank) 301080
A blank, commercially available memory card used
for transferring software updates and expandable
features from your computer to the machine.
TIG Torches, Kits and Connectors
Contractor Kits
301309 150 A RFCS-14 HD Foot Pedal Kit
301311 150 A RCCS-14 Fingertip Kit
All-in-one TIG/stick welding kit comes with either
a RFCS-14 HD foot control OR RCCS-14 fingertip
control, Weldcraft™ A-150 TIG torch, 200-amp
stick electrode holder and 300-amp work clamp
with 15-foot (4.6 m) cables, flow gauge regulator
with 12-foot (3.7 m) gas hose, gas hose coupler,
AK2C torch accessory kit and TIG torch connector.
Water-Cooled Torch Kits
300185 W-250
300990 W-280 (recommended)
301268 W-375
Kit comes with Weldcraft™ 25-foot (7.6 m)
TIG torch with Dinse-style connector, torch
cable cover, work clamp with 15-foot (4.6 m)
cable, flowmeter regulator with gas hose and
torch accessory kit (1/16-, 3/32- and 1/8-inch
2% ceriated tungsten, nozzles, collets and
collet bodies).
Water-Cooled TIG Torch
Connector 195377
50 mm Dinse-style with
water return line. For use with all Weldcraft™
water-cooled torches.
Remote Controls and Switches
Wireless Remote Foot
Control 300429
For remote current and
contactor control. Receiver
plugs directly into the 14-pin
receptacle of Miller machine. 90-foot (27.4 m)
operating range.
RFCS-14 HD Foot Control
194744
Maximum flexibility is accomplished with a reconfigurable
cord that can exit the front,
back or either side of the pedal. Foot pedal
provides remote current and contactor control.
Includes 20-foot (6 m) cord and 14-pin plug.
RCC-14 Remote Contactor and
Current Control 151086
East/west rotary-motion fingertip control
attaches to TIG torch using two hook-and-loop
fasteners. Includes 26.5-foot (8 m) control cord
and 14-pin plug.
RCCS-14 Remote Contactor and
Current Control 043688
North/south rotary-motion fingertip control
attaches to TIG torch using two hook-and-loop
fasteners. Includes 26.5-foot (8 m) cord and
14-pin plug.
RMS-14 On/Off Control
187208
Momentary-contact switch for contactor
control. Rubber-covered pushbutton dome
switch ideal for repetitive on-off applications.
Includes 26.5-foot (8 m) cord and 14-pin plug.
RMLS-14 Switch 129337
Momentary- and maintainedcontact rocker switch for contactor control.
Push forward for maintained contact and
backward for momentary contact. Includes
26.5-foot (8 m) cord and 14-pin plug.
RHC-14 Hand Control
242211020
Miniature hand control for
remote current and contactor
control. Dimensions: 4 x 4 x
3.25 inches (102 x 102 x 83 mm). Includes
20-foot (6 m) cord and 14-pin plug.
Wireless Remote Hand Control
300430
For remote current and contactor
control. Receiver plugs directly
into the 14-pin receptacle of
Miller machine. 300-foot
(91.4 m) operating range.
Educational Materials
To order, please call Miller Literature at 866-931-9732
or visit MillerWelds.com/resources/tools.
Gas Tungsten Arc Welding (TIG) Publication
250833
Setup DVD 251116
Video topics include tungsten selection, setup
menus, DC pulse, sequencer, balance and
frequency settings.
Tungsten
Tungsten
Amp Range
2% Ceriated (AC/DC)
2% Lanthanated (AC/DC)
1/16 in. (1.6 mm)
70 –150 A
WC116X7
WL2116X7
3/32 in. (2.4 mm)
140 – 250 A
WC332X7
WL2332X7
1/8 in. (3.2 mm)
225 – 400 A
WC018X7
WL2018X7
5/32 in. (4.0 mm)
300 – 500 A
WC532X7
WL2532X7
7
Ordering Information
Equipment and Options
Stock No.
Description
Dynasty 280
Dynasty® 280 (CPS)
Dynasty® 280 DX
Dynasty® 280 DX (CPS)
Dynasty® 280 DX (CPS) International
Dynasty® 280 DX with Insight (CPS)
907550
907537
907551
907514
907514002
907514003
Auto-Line 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Auto-Line™ 208 – 575 V, 50/60 Hz, CE. 8 ft. power cord
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Water-Cooled Packages
Dynasty® 280 (CPS) TIGRunner®
907537002
Dynasty® 280 DX (CPS) TIGRunner®
907514001
Dynasty® 280 DX with Insight (CPS) TIGRunner®
907514004
Dynasty® 280 (CPS) Complete w/Foot Control
Dynasty® 280 DX (CPS) Complete w/Foot Control
Dynasty® 280 DX (CPS) Complete
w/Wireless Foot Control
951466
951468
951469
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
(Torch kit, accessories and coolant sold separately)
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
(Torch kit, accessories and coolant sold separately)
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
(Torch kit, accessories and coolant sold separately)
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Insight Reporter™
Insight Reporter™ SQL Database
Field Application Support
301314
301323
301315
301316
301256
301317
300710
195480
Standard capability for Dynasty
Advanced capability for Dynasty
Standard and advanced capability for Dynasty
Version 9.0 single license for Dynasty
Version 9.0 site license
Management reporting system client software for Dynasty
Management reporting system database software (one required per server)
Miller field support (contact distributor for details)
Accessories
Protective Cover
Small Runner™ Cart
Coolmate™ 1.3
TIG Coolant (Must be ordered in quantities of four)
301382
301318
300972
043810
For Dynasty 210/280 and Maxstar 280
For Dynasty/Maxstar 210 and 280 with or without Coolmate 1.3
120 V, 60 Hz, CSA. Requires coolant
1-gallon plastic bottle. Protects against freezing to
-37° Fahrenheit (-38° C) or boiling to 227° Fahrenheit (108° C)
See page 7
See page 7
301309
301311
WP-17-12-R
WP-17-25-R
WP-26-12-R
WP-26-25-R
195379
195378
Foot pedal
Fingertip
12 ft. (3.7 m) cable. Requires 195378 connector
25 ft. (7.6 m) cable. Requires 195378 connector
12 ft. (3.7 m) cable. Requires 195379 connector
25 ft. (7.6 m) cable. Requires 195379 connector
Connects Weldcraft™ A-200 (WP-26) torch to Dinse-style connector
Connects all air-cooled Weldcraft™ torches (except A-200) to
Dinse-style connector. A-80 (WP-24) torches require 24-5 connector
W-250
W-280 (recommended for Dynasty 280)
W-375
Connects Weldcraft™ water-cooled torches to Dinse-style connector
See page 7
®
Software
Insight Centerpoint ™
TIG Gloves
Memory Cards
TIG Torches, Kits and Connectors
Air-Cooled Contractor Kits
Weldcraft™ A-150 (WP-17) TIG Torch
Weldcraft™ A-200 (WP-26) TIG Torch
Air-Cooled TIG Torch Connectors
Water-Cooled Torch Kits
Water-Cooled TIG Torch Connector
Tungsten
300185
300990
301268
195377
Remote Controls
See page 7
Educational Materials
See page 7
Date:
Distributed by:
© 2016 Miller Electric Mfg. Co.
Qty.
™
Total Quoted Price:
Price

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project