Impax IM201-24L Oil Free Air Compressor Instruction Manual

Below you will find brief information for Oil Free Air Compressor IM201-24L. This air compressor is ideal for various tasks like inflating tires, operating pneumatic tools, spray painting, and spraying non-corrosive cleaning agents. It features a built-in pressure regulator for precise control and an overload protection device for safety. The compressor also comes with a drain valve for easy removal of condensation.

PDF Download
Document
Oil Free Air Compressor IM201-24L Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Oil-free design
  • Pressure regulator
  • Overload protection
  • Drain valve
  • Quiet operation
  • Easy to use
  • Durable construction

Frequently asked questions

First, switch off the compressor and disconnect it from the mains supply. Then, place a container under the drain valve. Carefully loosen the drain valve until you hear a hissing sound. This indicates the tank is depressurizing. Once the pressure gauge reads zero, tighten the drain valve again.

The maximum rated air pressure for this compressor is 8 bar.

If the overload cutout switch trips, it means the motor has overheated. Switch off the compressor, wait approximately 5 minutes, then press the reset button and switch the compressor back on. If the overload cutout trips again, contact a qualified service agent.
Preparing document for printing…
0%