NAD tech 2004
Features and Technical Specifications
power ed by passion
celebrating 30 years of critical acclaim
NAD’s tradition of creating products with “giant killer” performance has been well
established over the last thirty years. This reputation has been earned by applying creative
engineering solutions and meticulous fine-tuning to every circuit in every NAD product.
Designed by music and film lovers, for music and film lovers, NAD components consistently
deliver exceptional performance that creates a sense of involvement and truly carries you
away. It is our strong belief, that when a product doesn’t deliver an emotionally involving and
musically accurate performance, then it has missed the primary point of its very existence!
But we don’t stop there. By keeping our designs simple, yet with an eye to the future, and
avoiding the trendy gimmicks favoured by many of our competitors, NAD stands alone in
consistently delivering pure entertainment and lasting value.
(20Hz - 20kHz), and at rated distortion.
Why “Music First”?
NAD’s “Music First” philosophy represents
Full Disclosure Power Ratings
This is a far cry from the commonly used
a refreshingly different approach to most
Power sells products, so many manufacturers
FTC industry standard minimal requirement
other components on the market today, in
tailor their designs to obtain the best power
of using an 8 ohm load, any “associated”
that it keeps accurate music reproduction
ratings in industry-standard tests. In today’s
channels (no more than 2 at a time), at an
as its first priority. With music, distortion
digital world, with uncompressed signals
easy 1 kHz frequency with no distortion
is relatively easy to notice but with a
and multi-channel entertainment, these
specified!
great deal of movie soundtrack material,
continuous power ratings drive designs that
there often isn’t an apparent correlation
are inefficient, hot, heavy and expensive to
Musical sound is not a uniform signal like the
between the distortion and the sound
produce. Even worse, the sound quality in
continuous power ratings dictate. Rather, it
causing it; after all, who knows what the
most of these designs is very thin, overly
is “dynamic”, occurring in bursts (“notes”)
Tyrannosaurus Rex really is supposed to
bright, and lacking musical texture. And
of varying duration.
sound like? NAD therefore demands that
since the power is far less than “promised”
amplifiers, NAD “smart” dual-stage power
their audio-for-video components maintain
when driving 5 or 6 loudspeakers, the
supplies are designed to handle the
the same high standards of musicality that
dynamic power required for the full intensity
“dynamic power” needs of today’s music
we are known for in our stereo products. If
of an action movie scene or orchestral climax
and films more effectively. Furthermore, our
an A/V receiver or DVD player can pass the
is simply not available.
amplifier designs produce outstanding low
Unlike conventional
impedance drive capabilities, even when
demanding rigors of music reproduction,
then it will sound exceptional with motion
Our Solution
driving the most demanding loudspeakers
picture soundtracks.
NAD’s approach to this conundrum is
in a high-performance home theatre system.
to optimize its power supply to properly
So, if you’re looking for an affordable
Hollywood
drive real-world loudspeakers. This means
alternative to the over-hyped receivers and
blockbusters, sci-fi, drama, comedy, music
a properly regulated high current power
amplifiers on the market today listen to the
or sports, (or even computer games), NAD’s
supply is fitted to all NAD amplifiers and
NAD difference for yourself - we think you’ll
“Music First” approach to component
receivers. Thus we can rate our receivers
be amazed.
design assures a rich and exciting new
with a continuous 4 ohm load, ALL channels
dimension to your home entertainment.
driven simultaneously, FULL bandwidth
Whether
you’re
into
Dynamic Power
NAD 80W A/V Receiver
Conventional
80W A/V Receiver
Compare the difference
between the deficient
multi-channel dynamic
power of a conventional
amp and that of an NAD
amplifier or receiver NAD’s PowerDrive™
provides the dynamic
power to drive today’s
most demanding music
and movie sources.
D yn amic Powe r/W att s
All 5 channels driven
simutaneously
of today’s amplifiers, especially those built
140
into receivers, NAD components “sound
powerful” because they are indeed powerful.
130
Now another innovation, the patented
120
amplifier circuit PowerDrive™ takes NAD’s
110
power amplification design to a new high
of useful sophistication. This exclusive NAD
100
technology provides high dynamic power
90
and low impedance drive capability, hence
the name PowerDrive™.
80
8 ohms
4 ohms
2 ohms
I m p e d anc e
Here is a dual-rail power supply that
can handle the rough terrain, much like
THD Comparision
an all-wheel drive automobile, slipping
1.1
Total Harmonic Distortion
All 5 channels driven
simutaneously
8 ohms
4 ohms
4 ohms
.7
.5
2 ohms
2 ohms
Unlike the excessive
distortion of conventional
amplifiers, NAD’s unique
PowerDrive™ design
assures the ability to
drive the most demanding
loudspeakers cleanly.
THD %
NAD 80W A/V Receiver
Conventional
80W A/V Receiver
8 ohms
automatically into this control only when
.9
needed. All NAD A/V receivers and amplifiers
with PowerDrive™ are unsurpassed in
delivering clean, undistorted power under
the most demanding audio conditions, with
the ability to continuously drive a 4 ohm
.3
speaker load at full bandwidth, at rated
.1
power, all channels driven simultaneously.
.05
The result - explosive dynamics and control,
20
30
40
50
60
70
80
90
even under demanding speaker loads.
Po wer/ Wa t t s
You may read about NAD’s other unique
SOUND, NOT SPECS
rooms. Ultimately our ears pass judgement
innovations at our website. Ultimately
Specifications, by their very nature, are just a
concerning the real meaning of power. When
reading about sound is a poor substitute for
snapshot of a component’s capability. NAD’s
you listen to the clear and intensely detailed
the real thing. Experience our difference at
Full Disclosure Power Ratings are an earnest
sound of NAD, you’ll understand why we
your local NAD audio/video specialist.
attempt to bring honesty to the power
focus on low impedance drive capability
ratings “game”. In the final analysis, no one
and you’ll appreciate the commitment to
ever listens to ratings. Rather we listen to
engineering behind PowerDrive™ and its
music or movie soundtracks in our listening
incredible dynamic power reserves.
NADelectronics.com/power
If you would like to know more about
today’s power rating standards and
achieving musically effective power
from your amplifiers or receivers,
please visit us above or at an NAD
specialty dealer near you.
PowerDrive™
With a heritage of critically acclaimed
performance, NAD receivers and amplifiers
are well known for delivering impactful
“real world” dynamic power far in excess
of rated continuous power. Unlike many
T 163 A/V Tuner Preamplifier
•Dolby Digital, Dolby Digital EX, ProLogic II, DTS, DTS ES, DTS NEO:6,
Matrix 7.1, EARS, Enhanced Stereo
•HDCD®
•Stereo Bypass
•24 bit/192kHz DACs for all channels
•6 Video Inputs all S-Video and Composite, 2 Tape Loops
• Component Video, 3 Inputs and 1 Output
HDTV Compatible
•3 Audio Inputs, 1 Tape Loop
•6 Digital Inputs, 4 Coaxial, 2 TOS Link freely assignable
•2 Digital Outputs, 1 Coaxial, 1 TOS Link
•7.1 Analogue Input
•Analogue input levels are adjustable for best S/N ratio
•Pre-amp Outputs employ discrete component buffer amps for ultra-low
output impedance and high current drive
•Zone 2 A/V Preout with independent source and volume
•RS-232 port interface for advanced control systems and software upgrades
•IEC Detachable Power Cable
•3 x 12V Trigger Outputs, 12V Trigger Input
•3 x IR Outputs, IR Input
•All Inputs can be renamed, and preferred surround mode is saved
•5 Custom Scenario Presets store unique speaker setting (Bass Management)
surround mode and tone control settings for instant recall
•HTR-2 - 8 Device Illuminated Learning Remote with Macro function
T 973 7-Channel Power Amplifier
• 7 x 140W Simultaneous Minimum Continuous Power into 4 / 8 ohms
• 2 x 200W Continuous Power into 4 / 8 ohms
• 230W, 390W and 450W IHF Power into 8, 4 and 2 ohms, respectively
• Mono-block, Modular construction
• Differential, Class A input circuit topology
• PowerDrive™
• High Current Holmgren™ Toroidal Power Transformer
• Input gain control for each individual channel
• Gold Plated RCA Inputs
• NAD Soft Clipping™
• 12V Trigger for automated ON/OFF operation
T 773 A/V Receiver
• 7 x 110W Simultaneous Minimum Continuous Power into 4 / 8 ohms
• 230W, 320W, 390W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
• PowerDrive™
• High Current Holmgren™ Toroidal Power Transformer
• Dolby Digital, Dolby Digital EX, ProLogic II, DTS, DTS ES, DTS NEO:6,
Matrix 7.1, EARS and Enhanced Stereo
• HDCD® • Stereo Bypass
• 5 A/V Custom Presets Store Unique Settings
• Direct access speaker level adjustment for surround, center and subwoofer
• 6 A/V Inputs all S-Video and Composite, full tape loops
• Component Video, 3 Inputs and 1 Output, HDTV Compatible
• 3 Audio Inputs, 1 tape loop
• 6 Digital Inputs, 4 Coaxial, 2 TOS Link freely assignable
• 2 Digital Outputs, 1 Coaxial, 1 TOS Link
• 7.1 Analogue Input (for DVD-Audio)
• Speaker A + B switching (Speakers stereo only)
• Multi-Source 2nd zone A/V pre-out with independent source and volume
•ZR-2 Second Zone Remote included, discrete codes for independent zone
• NAD Soft Clipping™
• 2 x IR Outputs, IR Input
• RS-232 port interface for advanced control systems and software upgrade
• 3 x 12V Trigger Outputs, 12V Trigger Input • IEC Detachable Power Cable
• Preamp Outputs for all 7.1 channels (2 Subwoofers)
• Amplifier Input for 7 Power Amps
• RDS FM/AM Tuner with 30 direct access presets
• HTR-2 - 8 Device Illuminated Learning Remote with Macro function
T 763 A/V Receiver
• 6 x 100W Simultaneous Minimum Continuous Power into 4 / 8 ohms
• 210W, 300W, 370W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
• PowerDrive™
• High Current Holmgren™ Toroidal Power Transformer
• Dolby Digital, Dolby Digital EX, ProLogic II, DTS, DTS ES, DTS NEO:6,
Matrix 7.1, EARS and Enhanced Stereo
• HDCD®
• Stereo Bypass
• 5 A/V Custom Presets store unique speaker level and tone control settings
• Direct access speaker level adjustment for surround, center and subwoofer
• 6 A/V Inputs all S-Video and Composite, 2 full tape loops
• Component Video, 3 Inputs and 1 Output, HDTV Compatible
• 3 Audio Inputs, 1 Tape Loop
• 6 Digital Inputs, 4 Coaxial, 2 TOS Link freely assignable
• 2 Digital Outputs, 1 Coaxial, 1 TOS Link
• 7.1 Analogue Input (for DVD-Audio)
• Speaker A + B switching (Speakers B stereo only)
• Multi-Source 2nd zone A/V pre-out with independent source and volume
• ZR-2 Second Zone Remote included, discrete codes for independent zone
• 2 x IR Outputs, One IR input
• RS-232 port interface for advanced control systems
• 3 x 12V Trigger Outputs, 12V Trigger Input
• IEC Detachable Power Cable
• Preamp Outputs for all 7.1 channels (2 Subwoofers)
• Amplifier Input for 6 Power Amps
• DS FM/AM Tuner with 30 direct access presets
• NAD Soft Clipping™
• HTR-2 - 8 Device Illuminated Learning Remote with Macro function
T 753 A/V Receiver
•6 x 70W Simultaneous Minimum Continuous Power into 4 / 8 ohms
•150W, 200W, 225W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
•PowerDrive™
•Dolby Digital, Dolby Digital EX, ProLogic II, DTS, DTS ES, DTS NEO:6,
Matrix 7.1, EARS and Enhanced Stereo
•5 A/V Custom Presets store unique speaker level and tone control settings
•Direct access speaker level adjustment for surround, center and subwoofer
• Stereo Bypass
•NAD Soft Clipping™
•6 A/V Inputs all S-Video and Composite, 2 Full Tape Loops
•  Component Video, 2 Inputs and 1 Output, HDTV Compatible
•1 Audio Tape Input and Output
•6 Digital Inputs, 4 Coaxial, 2 TOS Link freely assignable
•2 Digital Outputs, 1 Coaxial, 1 TOS Link
•7.1 Analogue Input (for DVD-Audio)
•Speaker A + B switching (Speakers B stereo only)
•Multi-Source 2nd zone audio pre-out with independent source and volume
•ZR-2 Second Zone Remote included, discrete codes for independent zone
•IEC Detachable Power Cable
•2 x IR Outputs, IR Input,
•2 x 12V Trigger Outputs, 12V Trigger Input
•Preamp Outputs for all 7.1 channels (2 Subwoofers)
•Amplifier Input for 6 Power Amps
•RDS FM/AM Tuner with 30 direct access presets
•HTR-2 - 8 Device Illuminated Learning Remote with Macro function
T 743 A/V Receiver
•5 x 50W Simultaneous Minimum Continuous Power into 4 / 8 ohms
•105W, 145W, 165W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
•Dolby Digital, DTS, ProLogic II, EARS and Enhanced Stereo
•5 A/V Custom Presets store unique speaker level and tone control settings
•Direct access speaker level adjustment for surround, center and subwoofer
• Stereo Bypass
•NAD Soft Clipping ™
•6 A/V Inputs, 3 with S-Video, 2 Full Tape Loops
• Component Video, 2 Inputs and 1 Output, HDTV Compatible
•2 Audio Inputs, 1 Tape Output
•6 Digital Inputs, 4 Coaxial, 2 TOS Link freely assignable
•5.1 Analogue Input (for DVD-Audio)
•Speaker A + B switching (Speakers B stereo only)
•2 x IR Outputs, IR Input
•2 x 12V Trigger Outputs, 12V Trigger Input
•Preamp Outputs for all 5.1 channels (2 Subwoofers)
•Amplifier Input for 3 amplifier channels
•RDS FM/AM Tuner with 30 direct access presets
•HTR-2 - 8 Device Illuminated Learning Remote with Macro function
T 562 DVD/CD Player
•Plays DVD-Video, VCD, CD, CD-R, CD-RW
•HDCD® decoding
•State-of-the-art MPEG audio decoder (230V only)
•Dolby Digital/PCM/DTS Digital Output
•Component Video; S-Video; Composite Video Outputs
•SCART with RGB (except North America)
•Progressive Scan with 3:2 pull down (NTSC 120V version only)
•Coaxial & Optical Digital Outputs with selectable 48kHz or 96kHz Output
•Audiophile quality 192kHz/24 bit exclusive NAD DAC and Burr-Brown
Op-amps for analogue outputs
• 4 x 10 bit 54MHz Video DACs
•Adjustable Black Level (Gamma)
•5 Step Zoom feature for up to 32x video magnification
•12V Trigger Input
•IR Input
•IEC Detachable Power Cable
•Scene Bookmarking
•Resume Play
•NAD DVD-3 Remote Control
T 533 DVD/CD Player
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Plays DVD-Video, DVD+R, VCD 2.0, SVCD, J-PEG, Kodak Picture CD
Plays DVD-Audio*, CD, CD-R, CD-RW
Dolby Digital Decoder Integrated
Bass Management for DVD-A and Dolby Decoded Programs
Dolby Digital/PCM/DTS Digital Output
MPEG-2 Digital Output (230V version only)
MP-3 and WMA Decoder Integrated (song titles displayed on video output)
Coaxial and Optical Digital Outputs
Auto Switch from PCM to Bitstream
Audiophile Quality 24 bit/192kHz DACs
Audiophile Quality 5.1 Analogue Output
4 x 10 bit Video DAC running at 54MHz
Progressive Scan with 3:2 pull down (film detection mode)
S-Video and Composite Video Outputs
Component Video Output
SCART with RGB and Composite Video Output (230V version only)
PAL/NTSC Compatible (with PAL 60 option 230V version only)
Scene Bookmarking
Zoom (X100), Marker, Marker Search
Smooth Scan and Slow Motion
12V Trigger Input
NAD DVD-5 Remote Control
*: These features need to be supported by DVD software.
T 513 DVD/CD Player
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Plays DVD-Video, DVD+R, VCD 2.0, SVCD, J-PEG, Kodak Picture CD
Plays CD, CD-R, CD-RW, MP-3 and WMA Decoder Integrated
Dolby Digital/PCM/DTS Digital Output
MPEG-2 Digital Output (230V version only)
Coaxial and Optical Digital Outputs
Auto Switch from PCM to Bitstream
Audiophile Quality 24 bit/96kHz DACs , Stereo Analogue Output
4 x 10 bit/54MHz Video DAC
Progressive Scan with 3:2 Pull Down (film detection mode)
S-Video and Composite Video Outputs
Component Video Output
SCART with RGB and Composite Video Output (230V version only)
PAL/NTSC Compatible (with PAL 60 option 230V version only)
Zoom (X100), Marker, Marker Search
Smooth Scan and Slow Motion
12V Trigger Input
NAD DVD-5 Remote Control
HTR-2 Learning Remote Control
• Controls up to 8 Devices
• Preprogrammed with all NAD remote commands
• Learning function - learns up to 352 commands
• Macro operations - program up to 44 Macros with as many as
64 commands each
•  Punch Through Operations permit easy access to commonly used functions
without reselecting a device
• Back Lit (with adjustable time out) for easy operation in low light conditions
• Can generate IR signals with a carrier frequency up to 500 kHz
(B&O compatible)
C 542 CD Player
• CD, CD-R and CD-RW Compatible 
• HDCD® Decoder with Automatic Detection
• Burr-Brown Sigma-Delta 24 bit Digital to Analogue Converter 
• Nichicon “Muse” capacitors
• Coaxial Digital Output
• Optical Digital Output 
• Low Output Impedance
• Separate Power Regulators for Analog and Digital Sections 
• VFL Display with selectable Track, Time and Repeat
• Repeat Mode for Single Track or Entire CD
• Program Play up to 20 Tracks 
• Random Play
• External IR Input
• 12V Trigger Input 
• NAD CD-6 Full Function Remote Control
C 521BEE
CD Player
542 CD Player
• CD, CD-R and CD-RW Compatible 
• Burr-Brown Sigma-Delta 20 bit Digital to Analogue Converter 
• Coaxial Digital Output 
• Low Output Impedance
• Separate Power Regulators for Analogue and Digital Sections 
• EL Backlit Display with selectable Track, Time and Repeat
• Repeat Mode for Single Track or Entire CD
• Program Play up to 20 Tracks 
• Random Play
• NAD CD-6 Full Function Remote Control
C 660 CD Recorder
• Dual Deck (1 x playback; 1 x record)
• Integrated HDCD® decoder
• CD-Recordable (Audio disc) and CD-ReWritable (Audio disc)
• 4 x Dubbing Speed
• Will play MP-3 discs; up to 10 hours of music per disc
• DSP IC for MP-3 decoding, running “Fraunhofer” algorithms
• Built-in sample rate converter: all sample rates from 22 to 96kHz are accepted
• 12V Trigger Input
• Record per track or entire CD
• CD text recognition and dubbing
• CD deck will play unfinalised CD-R and CD-RW discs
• 2 Optical and2 Coaxial Digital Outputs
• 2 Optical (one on front panel) and 1 Coaxial Digital Inputs
• Simultaneous and Sequential playback of both decks
• Audiophile-grade AKM ADC & DACs
• Headphone Output
• C 660 Remote Control
C 422 Stereo Tuner
• 30 Station random presets (AM or FM)
• MOS-FET RF Front End
• VFL Display
• 8 Character preset naming capability for AM & non-RDS stations
• 12V Trigger Input
• RDS PS (Station name) and RT (Radio text)
• IR Sensor
• IR Input
C 740 Stereo Receiver
• 2 x 40W Minimum Continuous Power into 4/8 ohms
• 75W, 120W, 130W, IHF Dynamic Power into 8, 4 and 2 ohms , respectively
• PowerDrive™
• 6 Line Level Inputs, including 2 tape in/outputs
• Pre-out / Main-in
• 30 Station random presets (AM or FM) in 3 banks
• 25kHz Tuning steps
• MOSFET RF section and Front-End
• Gold plated RCA connectors
• Bass and Treble control with Tone Defeat Switch
• VFL Display
• NAD Link
• NAD Soft Clipping™
• 451 Full System Remote Control
C 372 Stereo Integrated Amplifier
• 2 x 150W Minimum Continuous Power into 4/8 ohms
• 220W, 340W, 460W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
• PowerDrive™
• High Current Holmgren™ Toroidal Power Transformer
• Bridgeable to 400W Mono (8 ohms)
• A/B Speaker outputs with remote switching
• 7 Line Inputs, including Two Tape In/Outs
• Main-amp input & 2 pre-amp outputs
• Bass and Treble Controls with Tone Defeat Switch
• Relay Input Switching
• All Discrete Circuitry
• Gold plated RCA Connectors
• Short signal path from input to output
• NAD Soft Clipping™
• Headphone socket
• IEC Detachable Power Cable
• 12V Trigger Output
• IR Input/Output
• NAD SR-5 Full System Remote Control
C 352 Stereo Integrated Amplifier
• 2 x 80W Continuous Power into 4 / 8 ohms
• 115W, 185W, 240W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
• PowerDrive™
• High Current Holmgren™ Toroidal Power Transformer
• 7 Line Inputs, including Two Tape In/Outputs
• All Discrete Circuitry
• Short signal path from input to output
• Bass and Treble Controls with Tone Defeat Switch
• Main-amp Input & 2 Pre-amp Outputs
• NAD Soft Clipping™
• IR Input/Output
• 12V Trigger Output
• Relay Input Switching
• IEC Detachable Power Cable
• Headphone socket
• NAD SR-5 Full System Remote Control
C 320BEE Stereo Integrated Amplifier
• 2 x 50W Minimum Continuous Power into 4/8 ohms
• 110W, 160W, 210W, IHF Dynamic Power into 8, 4 and 2 ohms, respectively
• PowerDrive™
• High Current Holmgren™ Toroidal Power Transformer
• Headphones socket
• Relay Input Switching
• 7 Line inputs, including two tape in/outs
• All discrete circuitry
• Short signal path from input to output
• All sockets Gold plated
• Bass and Treble control with Tone Defeat Switch
• Main-amp input & pre-amp output
• NAD Soft Clipping™
• IR Input & Output
• 12V Trigger Output
• NAD SR-4 Full System Remote Control including Stand-by/Off
C 272 Stereo Power Amplifier
• 2 x 150W Minimum Continuous Power into 4/8 ohms
• 220W, 340W, 460W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
• PowerDrive™
• High Current Holmgren™ Toroidal Power Transformer
• Bridgeable to 400W mono (8 ohms)
• Both fixed and variable inputs, switch selectable
• Double set of loudspeaker binding posts to facilitate bi-wiring
• All Discrete Circuitry
• Gold plated RCA Connectors
• NAD Soft Clipping™
• 12V Trigger Input for remote Stand-by/On switching
• IEC Detachable Power Cable
• ATO Logic
C 162 Stereo Preamplifier
•6 Line Level Inputs including 2 Tape In/Outputs with dubbing facility
•Switchable MM and MC Phono Input
•2 Line Level Preamp Outputs; one is variable from 0dB to –12dB
•Gold Plated RCA Connectors
•Pure “Class A” Discrete Amplifier Modules
•Independent Headphone Amplifier
•Bass and Treble Control with Tone Defeat Switch
•“Blue Velvet” Alps motorized volume control
•Input switching through hermetically sealed relays
•NAD Link
•12V Trigger Output
•NAD SR-5 Full System Remote Control
533 Turntable / PP-2 Phono Preamplifier
533 Turntable
•Belt drive 2-speed turntable
•High torque synchronous motor
•High-density non-resonant base
•High-quality Goldring Elektra cartridge
•Miniature ball bearings for tone arm
•Statically-balanced tone arm
•Magnetic anti-skate
•One-piece aluminum pressure-cast tone arm
PP-2 Phono Preamplifier
•Selectable MM and MC phono stage
•External 24 volt power supply
•Gold plated sockets
•Close tolerance high quality components
•LED Power Indicator
S 570 DVD/CD Player
• DVD Video, VCD, SVCD, CD-R/CD-RW Compatible, MP-3 Decoder
• HDCD® Decoder
• Dolby Digital/PCM/DTS Digital Output
• Component Video; S-Video; Composite Video Output
• SCART with RGB (except North America)
• Progressive Scan (525p NTSC, 625p PAL)
• Coaxial & Optical digital outputs with selectable 48kHz or 96kHz data stream
• Audiophile quality 24 bit/192kHz exclusive NAD DAC and Burr-Brown
Op-amps for analogue outputs
• 4 x 10 bit 54MHz Video DACs
• Adjustable Black Level (Gamma)
• 5 step zoom feature for up to 32x video magnification
• 12V Trigger Input
• IR Input
• IEC Detachable Power Cable
• Scene Bookmarking
• Repeat and Random Play function
• Adjustable slow and fast scan
• Independent Switch Mode Power Supply for digital stages
• Independent Linear Power Supply analogue audio stages
• NAD DVD-5 Remote Control
S 170i Surround Sound Preamplifier
• Dolby Digital, Dolby Digital EX, ProLogic II, DTS, DTS ES, DTS NEO:6, Matrix
7.1, THX EX 5.1/6.1/7.1 Decoding, Stereo Enhanced Stereo Surround Mode
• THX Ultra 2 certified
• Latest Generation Motorola DSP Processor
• NAD’s Proprietary EARS Surround Music Mode
• 24 bit/96kHz Compatible
• 24 bit Resolution DACs for all channels
• 10 Inputs: 6 Video (3 are full in/out), 4 Audio (1 is Tape Monitor In/Out loop)
• All Video Inputs are S-Video and Composite
• Component Video Input
• 6 Digital Inputs: 1 BNC, 3 Coaxial, 2 Optical; freely assignable to any input
• 2 Digital Outputs: 1 Coaxial, 1 Optical
• Ext 5.1 Input for connection of DVD-A
• Multi-Source 2nd Zone Stereo Output
• 3 x 12V Trigger Outputs
• IEC Detachable Power Cable
• NAD Link
• RS-232 Port for advanced control systems and software upgrade
• HTR-2 - 8 Device Illuminated Learning Remote with Macro function
• ZR-2 Second Zone Remote
S 250 5-Channel Power Amplifier
• 5 x 125W Simultaneous Minimum Continuous Power into 4/8 ohms
• 172W, 273W, IHF Dynamic Power into 8 and 4 ohms, respectively
• 2 x 200W Minimum Continuous Power into 8 ohms
• Mono-block, Modular construction
• Differential, “Class A” input circuit topology
• High Current Holmgren™ Toroidal Power Transformer
• Individual Volume control for each individual channel
• Gold Plated RCA connectors
• NAD Soft Clipping™
• THX certified
• 12V Trigger
S 500i CD Player
• Newly improved High Performance Transport Plays CD-R and CD-RW
• Modular D/A Converter & Analogue circuitry
• 24 Bit Crystal D/A Converter
• High Current, Pure “Class A” Balanced Analogue circuitry
• DC coupled output with DC servo
• VFL Dot-Matrix display
• SPDIF coaxial & AES/EBU digital outputs; transformer isolated
• Balanced (XLR) & unbalanced outputs
• NAD Link
• IEC detachable power cable
• CD-5 Remote Control
S 400 Stereo Tuner
• 2 Selectable Antenna Inputs with 2 RF stages
• RDS facilities: Radio Text (RT), Program Service (PS)
• Selectable Character-display input for non-RDS stations
• 30 Station presets
• 25kHz Tuning steps
• IF Wide / Narrow switch
• Selectable Auto Blend
• Individual Dual Gate Class A MOSFET
• NAD Link
• IEC detachable power cable
• S-400 Full System Remote Control
S 300 Stereo Integrated Amplifier
• 2 x 100W Minimum Continuous Power into 4/8 ohms
• True Dual Mono configuration
• 2 High Current Holmgren™ Toroidal Power Transformers for Left & Right channels
• Separate power supply with own transformer for all non audio circuits
• Balanced inputs with XLR sockets
• Gold plated input and output sockets
• Zero negative feedback circuit topology
• NAD Link
• IEC detachable power cable
• 450 Full System Remote Control
S 200 Stereo Power Amplifier
• 2 x 225W Minimum Continuous Power into 4/8 ohms
• 280W, 470W, 700W, IHF Dynamic Power into 8, 4 and 2 ohms, respectively
• Bridgeable; 780W into 8 ohms
• High Current Holmgren™ Toroidal Power Transformer
• Dual mono, Left and Right mirror image amplifier PCBs
• Fully balanced XLR inputs
• NAD Soft Clipping™
• Protection circuitry senses short circuits, DC and overheating
• IEC detachable power cable
S 100 Stereo Preamplifier
• 7 Line Level Inputs incl. 2 Tape In/Outputs with dubbing facility
• High Current Holmgren™ Toroidal Power Transformer
• Input switching through relays with Gold Plated contacts
• Pure “Class A” circuit configuration
• Optional MM/MC plug-in phono module
• Balanced XLR outputs; 2 sets RCA line outputs
• Gold plated input and output sockets
• Independent headphone amplifier
• NAD Link
• IEC detachable power cable
• 450 Full System Remote Control
L 56 DVD/CD Player / L 76 A/V Receiver
L 56 DVD/CD Player
• Elegant Titanium finish
• Plays DVD, CD, CD-R, CD-RW, VCD
• MP-3 decoder integrated
• Coaxial and Optical Digital outputs
• S-Video and Composite video outputs
• SCART with RGB output
L 76 A/V Receiver
• 5 X 45 watts all channels driven simultaneously 20Hz – 20kHz
• 2 X 60 watts in Stereo mode
• Dolby Digital, Prologic II, DTS, Stereo 3, and Hall surround modes
• Informative On-Screen-Display
• Crystal Sigma-Delta ADC’s and DAC’s with 96kHz/24 bit resolution
• Subwoofer Pre-Out for powered subwoofers
• 6 Audio and 3 Video Inputs
• All Video in/outputs S-Video and Composite
• 3 Digital Inputs, 2 Digital Outputs
• RDS FM/AM Tuner with 30 station presets (RDS PS & RT)
• Gold Plated RCA sockets
• Binding Post speaker terminals
• NAD HTR L76 Learning Remote Control with illuminated keys
Note: L56/76 not available in North America
L 70 DVD Receiver
•5 x 45W Simultaneous Continuous Output Power into 8 ohms
•2 x 60W in Stereo mode
•82W IHF Dynamic Power into 8 ohms
•Dolby Digital, DTS, ProLogic II, EARS and Stereo Enhanced
 Surround Modes
•Plays DVD-Video, CD, CD-R, CD-RW, VCD
•MP-3 decoder integrated
•Full-size separate component performance
•Crystal Sigma-Delta ADCs and DACs with 96kHz/24 bit resolution
•Subwoofer Output
•Satellite and VCR Inputs, 5.1 Input for future surround
 mode upgrades
•2 Digital Inputs: 1 RCA; 1 TOS Link
•2 S-Video Inputs and 1 S-Video output
•VCR & TV Monitor Outputs including Component (120V)
 or SCART (230V)
•1 TOS Link Digital Output
•MPEG-2 decoder
•PAL/NTSC compatible with PAL 60 option (230V version only)
•Auto switch from PCM to Bitstream
•Audiophile quality DACs
•RDS Tuner (RDS PS & RDS RT)
•30 Presets for AM and FM
•Component Video Output
•SCART with RGB and Composite Video Output (230V version only)
•All RCA sockets gold-plated
•HTR L70 Learning Remote Control with illuminated keys
CI 9120 12-Channel Power Amplifier
• 12 x 80W Simultaneous Minimum Continuous Power into 4/6 ohms
• Multi-Channel power amp for custom installation
• Flex-Pad allows easy system configuration
• ATO Logic - auto-logic turn on circuit
• Output Management Circuit (OMC) ensures reliability
• Individual Input level controls
• EIA rack mount kit included
• Quiet low-pressure cooling system
CI 9060 6-Channel Power Amplifier
• 6 x 80W Simultaneous Minimum Continuous Power into 4/6 ohms
• Multi-Channel power amp for custom installation
• Multi-Channel power amp for custom installation
• Flex-Pad allows easy system configuration
• ATO Logic - auto-logic turn on circuit
• Output Management Circuit (OMC) ensures reliability
• Individual Input level controls
• EIA rack mount kit included
• Quiet low-pressure cooling system
A/V RECEIVERS
T 773
T 763
T 753
T 743
145W (21.6dbW)
130W (21.1dbW)
90W (19.5dBW)
70W (18.45dBW)
IHF dynamic power; 8Ω
2 x 230W (23.6dBW)
2 x 210W (23.22dBW)
2 x 150W (21.7dBW)
IHF dynamic power; 4Ω
2 x 320W (25.05dBW)
2 x 300W (24.77dBW)
2 x 200W (23dBW)
IHF dynamic power; 2Ω
2 x 390W (25.91dBW)
2 x 370W (25.68dBW)
2 x 225W (23.5dBW)
Amplifier Section
Power output Stereo Mode
(8Ω within rated distortion)
105W (20.2dBW)
145W (21.6dBW)
165W (22.1dBW)
7 x 110W (20.4dBW)
6 x 100W (20dBW)
6 x 70W (18.45dBW)
5 x 50W (16.98dBW)
Total harmonic distortion at rated power
0.08%
0.08%
0.08%
0.08%
IM distortion at rated power
0.08%
0.08%
0.08%
0.08%
60
60
60
60
400mV / 50kΩ
400mV / 50kΩ
400mV / 50kΩ
400mv / 50kΩ
Simultaneous power output surround mode
Damping factor 8Ω
Input sensitivity and impedance
Frequency response
Signal/noise ratio; ref rated power 8Ω
5 to 20,000 Hz
±0.8dB
>90dB
5 to 20,000 Hz
±0.8dB
>90dB
20Hz-20kHz +/- 0.8dB
>90dB
5 to 20,000 Hz
±0.8dB
>96dB
>80dB
>80dB
>80dB
>80dB
NAD HTR-2 / ZR-2
NAD HTR-2 / ZR-2
NAD HTR-2 / ZR-2
NAD HTR-2
Input sensitivity Mono
16.1dBf
16.1dBf
16.1dBf
16.1dBf
50dB Stereo:
36.1dBf
36.1dBf
36.1dBf
36.1dBf
Harmonic Distortion; FM Mono
0.25%
0.25%
0.25%
0.25%
Harmonic Distortion; FM Stereo
0.5%
0.5%
0.5%
0.5%
Signal/noise; Mono
60dB
60dB
60dB
72dB
Signal/noise; Stereo
55dB
55dB
55dB
66dB
Stereo separation at 1kHz
40dB
40dB
40dB
40dB
30Hz - 15kHz
30Hz - 15kHz
30Hz - 15kHz
30Hz - 15kHz
Signal/noise ratio; ref 1W / 8Ω
Remote Control(s)
Tuner Section
Frequency response; + 1.5dB
Video Section
Input and output impedance
75Ω
75Ω
75Ω
75Ω
Component Video Bandwidth
50MHz
50MHz
50MHz
50MHz
17 1/8 x 7 3/4 x 16 5/8”
17 1/8 x 6 3/4 x 16 5/8”
(435 x170x 423mm)
17 1/8 x 6 3/4 x 16 1/2”
(435 x170x 420mm)
17 1/8 x 5 3/16 x 13 3/4”
(435 x 132 x 350mm)
52.8 lbs (24kg)
45.4lbs (20.7kg)
45.1lbs (20.5kg)
36 lbs (16.35kg)
67.5 lbs (30.7kg)
48.8lbs (22.2kg)
48.5lbs (22.1kg)
39 lbs (18.15kg)
Physical Specifications
Dimensions (W x H x D)
(435 x 195 x 423mm)
Net Weight
Shipping Weight
T 562
T 533
T 513
S 570
10Hz -21kHZ
4Hz to 20kHz
4Hz to 20kHz
10Hz -21kHz
8Hz to 44kHz
8Hz to 44kHz
DVD/CD Players
Audio
Frequency Response CD Audio
Frequency Response DVD (96kHz)
Output Level
2V rms
2V rms, RCA x 7
2V rms, RCA x 2
2V rms
Signal/noise ratio, A-weighted
-103dB
-100dB
-100dB
-103dB
THD (at 0dB, 1kHz)
Wow and Flutter
0.003%
0.008%
0.008%
0.003%
< 0.001% peak
< 0.001% peak
< 0.001% peak
< 0.001% peak
Channel separation CD
-99dB
95dB
95dB
-99dB
Dynamic range
96dB
103dB
95dB
96dB
Number of discs
1
1
1
1
DVD Video
Signal to Noise
> 75dB (luminance)
60dB
60dB
> 75dB (luminance)
Signal System
PAL/NTSC
PAL(230V)/NTSC(120V)
PAL(230V)/NTSC(120V)
PAL/NTSC
Digital Coaxial - PCM, DTS, MPEG, (230V), AC3
RCA x1
0.5 p-p 75Ω, RCA x 1
0.5 p-p 75Ω, RCA x 1
RCA x1
Digital Optical - PCM, DTS, MPEG, (230V), AC3
TOS Link x 1, RCA x 1
5V p-p 75 ohms
5V p-p 75Ω
TOS Link x 1
RCA x 1
1v p-p 75Ω 1 x RCA
1v p-p 75Ω 1 x RCA
RCA x 1
Y/C pin x1
Y/C 4 DIN x 1
Y/C 4 pin x 1
Y/C DIN x1
Output
Composite Video
S-Video
Component Video
Yes
RCA x 3 Y/Cb/Cr
RCA x 3 Y/Cb/Cr
Yes
SCART w/RGB (230V)
SCART w/RGB (230V)
SCART w/RGB (230V)
SCART w/RGB (230V)
NAD DVD-3
NAD DVD-5
NAD DVD-5
NAD DVD-5
17 3/16 x 3 3/16 x 11 5/16”
17 1/8 x 2 5/8 x 9 5/8”
17 1/8 x 2 5/8 x 9 5/8”
17 3/4 x 4 1/4 x 11 1/2”
(435 x 80 x 286mm)
(435 x 67 x 243mm)
(435 x 67 x 243mm)
(450 x 106 x 293mm)
Net Weight
10.2lbs (4.63kg)
6.6lbs (3kg)
6.6lbs (3kg)
12.1bs (5.5kg)
Shipping Weight
14.32lbs (6.5kg)
8.6lbs (4kg)
8.6lbs (4kg)
15.4lbs (7kg)
Remote Control
Physical Specifications
Dimensions (W x H x D)
CD PLAYERS
C 542
C 521BEE
S 500i
CD Section
Disc Capacity
Programming Capability
Digital-to-analogue conversion
Digital Filter
1 x 120mm or 80mm
1 x 120mm or 80mm
1 x 120mm or 80mm
CD-R & CD-RW Compatible
CD-R & CD-RW Compatible
CD-R & CD-RW Compatible
20 Tracks
20 Tracks
20 Tracks
24 bit Sigma-Delta
20 bit Sigma-Delta
24-bit DeltaSigma
8 x oversampled
8 x oversampled
384 x oversampled
4 pole active
4 pole active
5th order
±0.5dB
±0.5dB
+0, -0.15dB
4 x interpolation
Analogue filter
Frequency Response 5Hz-20kHz
De-emphasis error
<0.5dB
<0.5dB
<0.25dB
THD (at 0dB, 1kHz)
0.0035%
0.0035%
<0.005%
Dynamic Range
Linearity
98dB
98dB
96dB
± 0.5dB; 0 to -90dB
± 0.5dB; 0 to -90dB
± 0.5dB; 0 to -90dB
Signal/noise ratio, A-weighted
108dB
108dB
>112dB
Channel separation at 1kHz
>110dB
>110dB
>100dB
Channel separation at 10kHz
Wow and flutter
>80dB
>80dB
>100dB
Quartz accuracy
Quartz accuracy
Quartz accuracy
Output impedance
150Ω
300Ω
120Ω
Output level at 0dB
2.2V rms
2.2V rms
2.2V rms
CIRC, double error correction
in C1 and C2
CIRC, double error correction
in C1 and C2
CIRC, double error correction
Yes - Coaxial
Yes - Coaxial
Yes - Coaxial
NAD CD-6
NAD CD-6
NAD CD-5
171/8 x 2 3/4 x 11 1/4”
(435 x 70 x 285mm)
17 1/8 x 2 3/4 x 11 1/4”
(435 x 70 x 285mm)
17 3/4 x 2 11/16 x 11 1/4”
Net Weight
9.0 lbs (4.1kg)
9.0 lbs (4.1kg)
11.11 lbs (5.04kg)
Shipping Weight
10.8 lbs (4.9kg)
10.8 lbs (4.9kg)
15.50 lbs (7.03kg)
Digital error correction
Digital output
Remote Control
in C1 and C2
Physical Specifications
Dimensions (W x H x D)
(450 x 67 x 285mm)
INTEGRATED AMPLIFIERS
C 372
C 352
C 320BEE
S 300
50kΩ / 320pF
50kΩ / 320pF
200kΩ / 320pF
20kΩ / 500 pF
350mV
330mV
220mV
+/-0.3dB
+/-0.3dB
±0.3dB
Pre-Amp Section
Line level inputs
Input impedance (R+C)
Input sensitivity, rated power
Frequency response (-3dB - 70kHz)*
+0/-0.16dB
Line level outputs
Output impedance
100Ω
100Ω
80Ω
220Ω
Source Z + 1kΩ
Source Z + 1kΩ
Source Z + 1kΩ
Source Z + 2kΩ
220Ω
220Ω
220Ω
220Ω
NAD SR-5
NAD SR-5
NAD SR-4
NAD 450
Continuous output power into 4/8Ω †
2 x 150W (21.76dBW)
2 x 80W (19.03dBW)
50W (17dBW)
100W (20dBW)
Rated Distortion (THD 20Hz - 20kHz)
0.02%
0.03%
0.03%
<0.75%
180W (22.55dbW)
85W (19.05dBW)
68W (18dBW)
108W (20dBW)
108W (20dBW)
Tape
Phones
Signal/noise ratio
Remote Control
>106dB
Power Amp Section
Clipping power ‡
IHF dynamic headroom at 8Ω
3dB
+1.5dB
3.4dB
IHF dynamic power at 8Ω
220W (23.42dBW)
115W (20.61dBW)
100W (20dBW)
IHF dynamic power at 4Ω
340W (25.31dBW)
185W (22.67dBW)
145W (21.6dBW)
IHF dynamic power at 2Ω
460W (26.62dBW)
240W (23.80dBW)
180W (22.5dBW)
>150
>150
>60
110
20kΩ/ 470pF
20kΩ/ 470pF
20kΩ/ 470pF
20kΩ/ 470pF
770 mV
770mV
630mV
350V
29dB
29dB
29dB
+/-0.3dB
+/-0.3dB
+/-0.3dB
0.01dB
-3dB
-3dB
3Hz/100kHz
3Hz/250kHz
Signal/noise ratio; ref 1W
>100dB
>100dB
100dB
79dB
Signal/noise ratio; ref rated power
>120dB
>120dB
117dB
99dB
17 1/8 x 5 1/4 x 13 13/16”
17 1/8 x 3 15/16 x 11 7/16”
17 1/8 x 3 15/16 x 11 7/16”
17 3/4 x 5 15/16 x 15 9/16”
(435 x 132 x 350mm)
(435 x 100 x 290mm)
(435 x 100 x 290mm)
(450 x 150 x 395mm)
26.45 lbs (12kg)
15.45 lbs (7.01kg)
14.33 lbs (6.5kg)
57.32 lbs (26kg)
31.65 lbs (14.36kg)
19.0 lbs (8.62kg)
16.98 lbs (7.7kg)
61.99 lbs (28.12kg)
Damping factor (ref. 8Ω, 50Hz)
Input impedance
Input Sensitivity (for rated power into 8Ω)
Voltage gain
Frequency response; 20Hz-20kHz
-3dB at:
Bridged Mode
Continuous average power input into 8Ω †
IHF dynamic headroom at 8Ω
300W (24.8dBW)
2.2dB
IHF dynamic power at 8Ω
780W (27dBW)
IHF dynamic power at 4Ω
1132W (28.5dBW)
Physical Specifications
Dimensions (W x H x D)
Net Weight
Shipping Weight
CUSTOM INSTALLATION AMPLIFIERS
CI 9060
CI 9120
Continuous Power, 20Hz-20kHz, all channels
6 x 80W
12 x 80W
0.03%
0.03%
Clipping Power (0.1% THD)
90W
90W
IHF dynamic power at 6Ω
85W
85W
IHF dynamic power at 4Ω
90W
90W
IM Distortion (SMPTE 60Hz+7kHz)
>0.08%
>0.08%
IM Distortion (CCIR 19kHz+20kHz)
>0.08%
>0.08%
Damping factor (6Ω, 20Hz-20kHz)
31
31
Input impedance
25kΩ
25kΩ
Input sensitivity
1.1 volts for 8W/6Ω
1.1 volts for 8W/6Ω
driven simultaneously at 4/6Ω
Total Harmonic Distortion
20Hz-20kHz at rated power
Voltage gain
Frequency response -3dB at: 75W
Signal/noise ratio; ref 1W
28dB
28dB
5Hz to 45kHz
5Hz to 45kHz
89dB
89dB
17 3/16 x 5 1/4 x 17 3/4”
17 3/16 x 5 1/4 x 17 3/4”
(435 x 133 x 450 mm)
(435 x 133 x 450 mm)
58 lbs (26.4kg)
80 lbs (36.5kg)
68 lbs (31kg)
90 lbs (41kg)
Physical Specifications
Dimensions (W x H x D)
Net Weight
Shipping Weight
POWER AMPLIFIERS
C 272
S 200
S 250
2 x 150W (21.76dBW)
2 x 225W (23.5dBW)
2 x 200W (23dBW)
Power Amp Section
Power output Stereo Mode
(8Ω within rated distortion)
Rated distortion (THD 20Hz-20kHz)
Clipping power
0.02%
0.03%
<0.05%
180W (22.55dBW)
240W (23.8dBW)
170W (20.30dbw)
IHF dynamic headroom at 8Ω
3dB
1dB
+1.4dB
IHF dynamic power at 8Ω
220W (23.42dBW)
280W (24.5dBW)
172W (22.4dBW)
IHF dynamic power at 4Ω
340W (25.31dBW)
470W (26.7dBW)
273W (24.4dBW)
IHF dynamic power at 2Ω
460W (26.62dBW)
700W (28.4dBW)
>150
>200
>300
20kΩ/470pF
47kΩ / 700pF
50kΩ
Simultaneous Output Mode
5 x 125W (21.0dBW)
Damping factor (ref. 8Ω, 50Hz)
Input impedance
Input sensitivity (for rated power into 8Ω)
1.3V
1.4V
1.1V
Voltage gain
29dB
x 28.3 (29dB)
29.0dB
Frequency response; 20Hz-20kHz
± 0.3dB
+ 0.3dB
+ 0, - 0.2dB
Signal/noise ratio; ref 1W
>100dB
96dB
95dB
Signal/noise ratio; ref rated power
>120dB
120dB
125dB
300W (24.8dBW)
780W (28.9dBW)
Bridged Mode
Continuous average power output into 8Ω
IHF dynamic headroom at 8Ω
2.2dB
1dB
IHF dynamic power at 8Ω
780W (27dBW)
940W (29.7dBW)
IHF dynamic power at 4Ω
1132W (28.5dBW)
1.3kW (31.1dBW)
17 1/8 x 5 3/16 x 13 13/16”
17 3/4 x 7 1/8 x 15 9/16”
17 3/4 x 5 15/16 x 15 9/16”
(435 x 132 x 350mm)
(450 x 180 x 395mm)
(450 x 150 x 395mm)
Net weight
24.8 lbs (11.2kg)
56.37 lbs (25.57kg)
41.89 lbs (19kg)
Shipping weight
31.3 lbs (14.2kg)
60.96 lbs (27.65kg)
46.30 lbs (21kg)
Physical Specifications
Dimensions (W x H x D)
CD RECORDER
C 660
Audio
Play
Signal/noise
105dB
Dynamic Range
105dB
Total harmonic distortion
0.005%
Line output voltage
Digital coaxial output
2V rms +/-2db
0.5 Vpp/75Ω
Recording
Frequency response (digital in)
Signal/noise (Analogue)
Dynamic Range
Total harmonic distortion
2Hz - 20.05kHz
91dB
91dB
0.005%
Digital coaxial input (direct recording)
32kHz to 96kHz
Digital optical input (direct recording)
32kHz to 96kHz
Analogue input (level potentiometer)
330mV rms / 50kΩ = 0dB
sampling rate
sampling rate
Remote Control
NAD C-660
General
Compatible with
CD, (Audio) CD-R, (Audio)
CD-RW, MP-3
Recording Speed (max)
Power Consumption
x1 x2 x4
28W
Physical Specifications
Dimensions (W x H x D)
17 1/8 x 3 3/4 x 11 7/8”
(435 x 95 x 300mm)
Net Weight
12.8 lbs (5.8kg)
Shipping Weight
15.4 lbs (7.0kg)
S 100
PP-2
C 162
Phono R + C; MM
47kΩ + 200pF
47kΩ + 470pF
47kΩ + 100pF
Phono R + C; MC
100Ω + 180pF
100Ω + 1nF
22, 100, 220Ω + 100pF
2.1mV
1mV / 3mV
PREAMPLIFIERS
Phono stage
Input sensitivity ref. 0.5V 1kHz; MM
Input sensitivity ref 200mV; MM
3.5mV
Input sensitivity ref 200mV; MM
0.2mV
115uV
1mV / 3mV
Input overload 20Hz/1KHz/20kHz; MM
10/102/950mV
20mV/230mV/2V
12mV / 120mV / 650mV
Input overload 20Hz/1KHz/20kHz; MC
Input sensitivity ref. 0.5V 1kHz; MC
0.8/9/84mV
1.3mV/12mV/110mV
0.4mV / 4mV / 65mV
Signal/noise ratio (A-weighted + cartridge); MM
80dB
80dB ref. 5mV
81dB ref. 5mV
Signal/noise ratio (Unweighted) MM
70dB
Signal/noise ratio (A-weighted + cartridge); MC
78dB
81dB ref. 0.5mV
75dB ref. 0.5mV
Signal/noise ratio (A-weighted + cartridge); MC
73dB
RIAA accuracy; MM (20Hz - 20kHz)
± 0.3dB
± 0.4dB
± 0.2dB
RIAA accuracy; MC (50Hz - 20kHz)
± 0.3dB
± 0.4dB
± 0.2dB
500kΩ + 320pF
33kΩ + 120pF
150mV
170mV
17V
>10V
Line level inputs
Impedance (R+C)
Sensitivity; ref. 0.5V
Maximum input signal
Signal/noise A-weighted
Frequency response (-3dB 3Hz - 70kHz)
THD
±0.03%
>100dB ref. 0.5V
97dB
± 0.2dB
+0, -0.03dB
0.01%
0.001%
Line level outputs
Output impedance, Pre-amp
Tape
75Ω
75Ω
Source Z + 1kΩ
Source Z + 2kΩ
Phones
100Ω
120Ω
Maximum output level; Pre-amp
>15V
>9.5V
>15V
>10V
Tape
190mV into 8Ω
Phones
Tone Controls
Treble
±5dB at 10kHz
Bass
±5dB at 50Hz
Remote control
No
NAD SR-5
NAD 450
5 3/8 x 1 3/8 x 2 3/4”
17 1/8 x 3 1/8 x 11 1/4”
17 3/4 x 2 11/16 x 11 1/4”
(135 x 35 x 70mm)
(435 x 80 x 285mm)
(450 x 67 x 285mm)
10.6 lbs (4.8 kg)
11.35 lbs (5.15kg)
13.2 lbs (6 kg)
16.53 lbs (7.5kg)
Physical Specifications
Dimensions (W x H x D)
Net Weight
Shipping Weight
A/V PREAMP PROCESSOR
S 170i
Decoding formats
Dolby Digital, Dolby Digital EX,ProLogic II,
DTS, DTS ES, DTS NEO:6, Matrix 7.1,
THX EX 5.1/6.1/7.1 Decoding,
Enhanced Stereo
Sampling Rates
32kHz, 44.1kHz, 48kHz, 96kHz
Modes
EARS, Stereo (analogue bypass)
Analogue performance
Analogue input impedance
16kΩ / 100pF
Analogue frequency response
20Hz - 20kHz +/- 0.2dB
Maximum input level
3V rms
THD+N
0.005%
Signal/noise ratio
>98dB
Dynamic Range
-95dB
Analogue channel separation
>95dB
Crosstalk
>90dB
Maximum output level
6V rms
Output impedance
Main pre-out
56Ω
Tape out
470Ω
Multi-room output
Tone Controls
470Ω
Bass
(@20Hz) +/- 12dB
Treble
(@20kHz) +/- 12dB
Centre
(@ 3kHz) +/- 6dB
Remote Control
NAD HTR-2
Digital input performance
THD+N (Bandwidth 10Hz - 20kHz)
0.005%
Physical Specifications
Dimensions (W x H x D)
17 3/4 x 3 7/8 x 11 1/4”
(450 x 97 x 285mm)
Net Weight
11 lbs (4.99kg)
Shipping Weight
STEREO TUNERS
12.99 lbs (5.89kg)
C 422
S 400
FM Tuner Section
Usable input sensitivity; FM mono
2.2µV, IHF
1.0µV
Usable input sensitivity; FM stereo
16µV, IHF
-25µV
50dB Quieting sensitivity; FM mono
4µV
1.6µV
50dB Quieting sensitivity; FM mono
28µV
19µV
Capture ratio (FM)
2.4dB
2dB
Image rejection
>60dB
100dB
Harmonic distortion; FM mono
0.2%
0.15%
Harmonic distortion; FM stereo
0.3%
0.20%
Signal/noise; mono
74dB
80dB
Signal/noise; stereo
70dB
78dB
>45dB
45dB min
15Hz-15kHz, ± 1.5dB
20Hz - 15kHz, ±.5dB
Channel separation at 1kHz
Frequency response
AM Tuner Section
Usable sensitivity
24dBµV
Selectivity
21dB
Image rejection
40dB
IF rejection
45dB
Signal/noise ratio
45dB
Harmonic distortion
0.30%
Physical Specifications
Dimensions (W x H x D)
Net Weight
Shipping Weight
17 1/8 x 3 3/16 x 11 1/4”
17 3/4 x 2 11/16 x 11 1/4”
(435 x 80 x 285mm)
(450 x 67 x 285mm)
8.8 lbs (4kg)
10.05 lbs (4.56kg)
11.22 lbs (5.1kg)
12.50 lbs (5.67kg)
STEREO RECEIVER
C 740
Pre-Amp Section
Line level inputs
Input impedance (R+C)
240mV
Maximum input signal
10V rms
Frequency response (-3dB 3Hz - 70Hz)*
±0.3dB
Maximum output level
220Ω
Source Z + 2kΩ
4V rms
Treble
5dB (at 10k)
Base
7dB (at 50Hz)
Remote Control
Clipping power ‡
IHF dynamic headroom at 8Ω
Operation
Manual
Length (pivot to stylus)
244mm
Overhang
Cartridge weight
Verticle tracking force
Cable capacitance
Transducer
Frequency response
40W (16dBW)
0.01%
55W (17.4dBW)
1.8dB
Static compliance
Equivalent tip mass
Verticle tracking angle
Stylus radius
Electrical characteristics
Load resistance
IHF dynamic power at 2Ω
130W (21.1dBW)
Load capacitance
>60
Line level inputs
20kΩ / 100pF
1V
Frequency response; 20Hz-20kHz
0.3dB
Signal/noise ratio; ref 1W (A-weighted)
90dB
Signal/noise ratio; ref rated power
106dB
FM Tuner Section
1.8µV
Usable input sensitivity; FM stereo
15µV
50dB Quieting sensitivity; FM mono
3.0µV
50dB Quieting sensitivity; FM mono
20µV
Capture ratio (FM)
3dB
Image rejection
>90dB
Harmonic distortion; FM mono
0.15%
Harmonic distortion; FM stereo
0.2%
Signal/noise; mono
74dB
Signal/noise; stereo
70dB
Channel separation at 1kHz
>45dB
Frequency response; ± 1.5dB
20Hz-15kHz
AM Tuner Section
Usable sensitivity
20 µV
Selectivity
32dB
Image rejection
32dB
IF rejection
50dB
Signal/noise ratio
52dB
Harmonic distortion
0.30%
Physical Specifications
Dimensions (W x H x D)
17 1/8 x 4 5/16 x 11 7/16”
(435 x 110 x 290mm)
Net Weight
Shipping Weight
15.8 lbs (7.2kg)
19.25 lbs (8.73kg)
Moving Magnet
±3dB, 20Hz-20kHz
2dB at 1kHz
120W (20.8dBW)
Usable input sensitivity; FM mono
1.7g
150-400pF
20dB at 1kHz
IHF dynamic power at 4Ω
Input sensitivity (for rated power into 8Ω)
4.2g
Channel separation
75W (18.8dBW)
Input impedance
9g
19.1mm
Channel balance
IHF dynamic power at 8Ω
Damping factor (ref. 8Ω, 50Hz)
High torque
33.3 & 45rpm
Tonearm
Sensitivity
Power Amp Section
Rated distortion (THD 20Hz-20kHz)
Speeds
Cartridge specification
Tone Controls
Continuous output power †
Belt drive
Mass
Line level outputs
Tape
533
Drive System
Motor
20kΩ / 500pF
Input sensitivity; ref 0.5V
Output impedance
TURNTABLE
5mV at 5cm/sec
16mm/N
0.7g
26°
18µm x 7µm
47kΩ
150-400pF
Internal inductance
56mH
Internal resistance
700Ω
Physical Specifications
Dimensions (W x H x D)
17 3/8 x 4 9/16 x 14”
447 x 115 x 356mm
Net Weight
11.55 lbs (5.25kg)
Shipping Weight
15.18 lbs (6.9kg)
A/V TUNER PREAMP
T 163
Analogue performance
Analogue input impedance
Analogue frequency response
Maximum input level
A/V 7-CHANNEL POWER AMPLIFIER
Continuous Power, 20Hz-20kHz, all channels
15K /100pF
5Hz to 20K -/±0.8dB
8V
T 973
7 x 140W (21.5dBW)
driven simultaneously at 4/8Ω
Rated Distortion (THD 20Hz-20kHz)
Clipping Power (0.1% THD)
0.03%
170W (22.1dBW)
THD+N
0.008%
Signal/noise ratio
>90dB
Dynamic Range
95dB
Analogue channel separation
70dB
IHF dynamic power at 4Ω
390W (26dBW)
70dB
IHF dynamic power at 2Ω
450W (26.5dBW)
Crosstalk
Maximum output level
5V
Output impedance
IHF dynamic headroom at 8Ω
IHF dynamic power at 8Ω
Damping Factor
ref. 8Ω, 50Hz >300
Input Impedance
50K
1.1V
Main pre-out
150 ohms
Input Sensitivity
Tape out
330 ohms
Voltage Gain
Multi-room output
330 ohms
Frequency Response
29.0dB
20Hz - 20kHz +0, -0.2dB
2Hz - 100kHz -3dB
Tone Controls
Bass
±10dB
Treble
±10dB
Remote Control
+1.4dB
230W (24dBW)
NAD HTR-2 / ZR-2
Signal/Noise Ratio
ref. 1W 95 dB
ref. rated power 125dB
Physical Specifications
Dimensions (W x H x D)
17 1/8 x 7 x 17 7/8”
(435 x 180 x 453mm)
Digital input performance
THD+N (Bandwidth 10Hz - 20kHz)
0.008%
Video
Input and output impedance
75Ω
Component Video Bandwidth
50Mhz
Composite and S-Video
12Mhz
Tuner Section
Input sensitivity Mono
16.1dBf
50dB Stereo:
36.1dBf
Harmonic Distortion; FM Mono
0.25%
Harmonic Distortion; FM Stereo
0.5%
Signal/noise; Mono
60dB
Signal/noise; Stereo
55dB
Stereo separation at 1kHz
Frequency response; + 1.5dB
40dB
30Hz - 15kHz
Physical Specifications
Dimensions (W x H x D)
17 1/8 x 5 15/16 x 15 3/8”
(435 x 150 x 399 mm)
Net Weight
Shipping Weight
17.6 lbs (8kg)
22.4 lbs (10.2kg)
Net Weight
68 lbs (31kg)
Shipping Weight
72 lbs (33kg)
L70 DVD RECEIVER
Amplifier Section
Amplifier Section
Power output Stereo Mode
2 x 60W (18dBW)
Simultaneous Continuous Output Power into 8 ohms
IHF dynamic power; 8 ohms
Total harmonic distortion at rated power
Damping factor 8 ohms
5 x 45W (16.53dBW)
2 x 82W (19dBW)
0.08%
>60
Frequency response
20Hz to 20kHz ±0.5dB
Frequency response
-3dB 10Hz to 60kHz
Signal/noise ratio; ref. rated power / 8 ohms
99dB
Signal/noise ratio; ref 1W / 8 ohms
85dB
Remote Control
NAD HTR L70
FM Tuner Section
50dB Quieting Sensitivity; FM Mono
-16 dBf
50dB Quieting Sensitivity; FM Stereo
-36.1 dBf
Image Rejection
>50dB
Harmonic Distortion; FM Mono
0.2%
Harmonic Distortion; FM Stereo
0.5%
Signal/noise; Mono
69 dB
Signal/noise; Stereo
64.2dB
Channel Separation at 1kHz
40dB
Frequency response; ±1.5dB
30Hz - 15kHz
AM Tuner Section
Usable Sensitivity
55dBu
Selectivity
25dB
Image Rejection
35dB
IF Rejection
50dB
Signal/Noise Ratio
55dB
Harmonic Distortion
0.8%
Audio
Frequency Response DVD Audio
48kHz sampling 10Hz - 22kHz
96kHz sampling 4Hz - 44kHz
Frequency Response CD Audio
Signal to noise ratio, A-weighted
THD (at 0dB, 1kHz)
Wow and Flutter
10Hz -22kHz
>85dB
T0.008%
Quartz accuracy
Channel separation CD
86dB
Dynamic range
103dB
DVD Video
Signal to Noise
62dB
Signal system
PAL/NTSC
Inputs
Digital coaxial - PCM, DTS, AC3
RCA x 1
Digital optical - PCM, DTS, AC3
TOS Link x 1
Outputs
Digital optical - PCM, DTS, AC3
Composite Video
S-Video
Component Video
12V Trigger
TOS Link x 1
RCA x 2
Y/C 4 pin x 2
Yes (120V) SCART w/RGB (230V)
RCA x 1
Physical Specifications
Dimensions
17 1/8 x 4 3/4 x 13”
(435 x 121 x 330 mm)
L 56 DVD/CD Player
Audio
Frequency Response CD Audio
10Hz to 20kHz
Output Level
2V rms
Signal/noise ratio, A-weighted
-105dB
THD (at 0dB, 1kHz)
0.008%
Wow and Flutter
< 0.001% peak
Channel separation CD
86dB
Dynamic range
103dB
DVD Video
Signal to Noise
62dB
Signal System
PAL/NTSC
Output
Digital Coaxial - PCM, DTS, MPEG, (230V), AC3
0.5 p-p 75Ω
Digital Optical - PCM, DTS, MPEG, (230V), AC3
0.5 p-p 75Ω
Composite Video
RCA x 1
S-Video
Component Video
Y/C 4 pin x 1
Yes SCART w/RGB(230V)
Physical Specifications
Dimensions (W x H x D)
11 1/4 x 3 9/16 x 11 7/16”
(285 x 90 x 290mm)
Net Weight
7.15 lbs (3.2kg)
Shipping Weight
10.2 lbs (4.5kg)
L 76 A/V RECEIVER
Amplifier Section
Power output Stereo Mode
60W (18dBW)
(8Ω within rated distortion)
IHF dynamic power; 8Ω
82W (19dBW)
IHF dynamic power; 4Ω
120W (20.7dBW)
Simultaneous power output surround mode
5 x 45W (16dBW)
Total harmonic distortion at rated power
0.08%
IM distortion at rated power
0.08%
Damping factor 8Ω
Input sensitivity and impedance
Frequency response
>200
200mV / 47kΩ
20Hz-20kHz +/- 0.5dB
Signal/noise ratio; ref rated power 8Ω
-99dB
Signal/noise ratio; ref 1W / 8Ω
-85dB
Remote Control
HTR L76
Tuner Section
Input sensitivity Mono
16.35dBf
50dB Stereo:
20.79dBf
Harmonic Distortion; FM Mono
0.2%
Harmonic Distortion; FM Stereo
0.3%
Signal/noise; Mono
74dB
Signal/noise; Stereo
70dB
Stereo separation at 1kHz
Frequency response; + 1.5dB
38dB
30Hz - 15Hz
Physical Specifications
Dimensions (W x H x D)
11 1/4 x 4 3/4 x 12 1/4”
(285 x 120 x 310mm)
Net Weight
19.1 lbs (8.68kg)
Shipping Weight
21.3 lbs (9.68kg)
* 20Hz - 20kHz in tone defeat mode † Minimum power per
channel, 20Hz - 20 kHz, both channels driven, with no more
than rated distortion ‡ Maximum continuous power per channel
Specifications are measured in accordance with EIA Standard
RS-490 (IHF A-202) for amplifiers. Amplifier measurements
referenced to 8Ω are taken with the Impedance Select set at
8Ω (High). Measurements for 4Ω and 2Ω are taken with the
Impendance Select set at 4Ω (Normal). Dimensions are of unitʼs
cabinets without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and
buttons.
HDCD, High Definition Compatible Digital and the HDCD
symbol are registered trademarks of Microsoft Corp, Inc.. MP-3
audio compression technology licensed by Fraunhofer IIS-A.
Dolby Pro Logic, Dolby Digital, Dolby Digital EX, Dolby Pro
Logic II and the Double ʻDʼ symbol and trademarks of Dolby
Laboratories Licensing Corporation. DTS, DTS-ES, DTS NEO:
6, and the DTS symbol are licensed trademarks of Digital
Theater System, Inc.. THX and THX Ultra are trademarks of
Lucasfilms, Ltd.
Electronics International reserves the right to change specifications or features without notice as design improvements are incorporated.
AD is a registered trademark of NAD Electronics International. All rights reserved. No part of this publication may be reproduced, stored
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement