null  null
PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
68-08564Z42-A_F.book Page 1 Wednesday, January 24, 2007 2:26 PM
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK
R
EN
Mobile Media Station
IVA-W205R
IVA-W202R
DE
a
.u
m
o
c
.
DIGITAL VIDEO
FR
• OWNER’S MANUAL
Please read before using this equipment.
0
13
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
ES
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il’attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa igenom
denna användarhandledning.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
IT
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
YAMAGATA (Wuxi) Co., Ltd.
Block 28-25, Changjiang Nanlu, WND, jiangsu, China
Designed by ALPINE Japan
Printed in China (Y)
68-08564Z42-A
Autogood products internet store http://130.com.ua
01GB01IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
SE
68-08564Z42-A_F.book Page 1 Wednesday, January 24, 2007 2:26 PM
ENGLISH
Contents
CD/MP3/WMA
Playback ..........................................................15
Operating Instructions
Repeat Play .....................................................16
M.I.X. (Random Play) ....................................16
Selecting Folders (concerning MP3/WMA) ...16
WARNING
About MP3/WMA ..........................................16
WARNING ................................................. 4
CAUTION .................................................. 4
PRECAUTIONS ........................................ 5
Discs Playable on This Unit ................... 6
Getting Started
Accessory List .................................................. 9
Location of Controls ........................................ 9
Turning Power On or Off ................................. 9
Inserting/Ejecting a Disc ................................ 10
Playing a Disc ................................................18
To display the DVD mode screen ...............18
If a menu screen appears .............................19
Displaying the Top Menu Screen ...............20
Displaying the Menu Screen ......................20
Displaying the Menu Operation Mode
Screen .....................................................20
Searching by Programme ...............................20
a
.u
Searching by Playlist ......................................20
Stopping Playback (PRE STOP) ....................21
m
o
c
.
Adjusting the Monitor Viewing Angle ........... 10
Adjusting the Volume ..................................... 10
How to view the Display ................................ 11
Touchscreen operation ................................ 11
Recalling the Source ................................... 11
Displaying the Numeric Keypad Input
Screen ...................................................... 12
Radio
DVD/Video CD
0
13
Listening to the Radio .................................... 12
Presetting Stations Manually .......................... 13
Presetting Stations Automatically .................. 13
Tuning to Preset Stations ................................ 13
RDS Operation
Turning AF (Alternative Frequencies)
On or Off ..................................................... 13
Stopping Playback .........................................21
Fast-forward/Fast-reverse ..............................21
Finding the Beginnings of Chapters or
Tracks ........................................................21
Playing Still Frames (Pausing) .......................21
Forward/reverse frame-by-frame Playback ....21
Slow Motion Playback ...................................22
Selecting Programme (SKIP) .........................22
Selecting Playlist (SKIP) ...............................22
Repeat Playback .............................................22
Searching by Title/Group/Programme/
Playlist Number ..........................................23
Searching Directly by Chapter or
Track Number .............................................23
Switching the Angle .......................................24
Receiving Traffic Information ........................ 14
Scroll to Move the Page Forward or Back .....24
PTY (Programme Type) Tuning ..................... 14
Switching the Audio Tracks ...........................24
Receiving Traffic Information While Playing
CD or Radio ................................................ 14
Switching the Subtitles
(Subtitle Language) ....................................25
Switching from the disc menu ....................25
Displaying the Disc Status for
DVD/Video CD ..........................................25
Priority News .................................................. 14
Displaying Radio Text .................................... 14
Autogood products internet store http://130.com.ua
1-EN
01GB03IVAW205TOCR.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 2 Wednesday, January 24, 2007 2:26 PM
Other Useful Features
Adjusting the Audio (Adjust the Fader/Balance/
Defeat/NAV. Level/Subwoofer/H.P.F./Bass/
Treble/Loudness) ......................................... 26
Search Function .............................................. 27
Rear Entertainment Function .......................... 27
Switching Display Modes ............................... 28
Switching the Visual Source Only
(Visual Select) ............................................. 28
Cancelling the Visual Select Function ........ 28
Blackout Mode On and Off ............................ 28
Setup
DVD Setup
DVD Setup Operation ..................................... 29
Setting of the Menu Language .................... 29
Setting of the Audio Language ................... 29
Setting of the Subtitle Language ................. 30
Changing the Country Code Setting ........... 30
Setting the Rating Level (Parental Lock) .... 30
Changing the Digital Output Setting ........... 30
Setting the Downmix Mode ........................ 32
Setting the TV Screen Setting ..................... 32
Setting of the Bonus Code .......................... 32
Setting of the DVD-Audio
Playback Mode ....................................... 32
Playing MP3/WMA Data
(File Play Mode) ...................................... 33
Setting the Video CD Play Mode ................ 33
Adjusting the Dimmer of Button Lighting at
Night ........................................................ 35
SYSTEM Setup
System Setup Operation ................................. 35
Setting the External Device
Interrupt Mode ......................................... 35
Setting the Interrupt Icon Display ............... 35
Switching the function of the
remote sensor ........................................... 35
Setting the Rear Camera Input .................... 36
Setting the Navigation Mode ...................... 36
Setting the Navigation Interruption ............ 36
Setting the AUX Mode ............................... 36
Adjusting the External Input
Audio Level ............................................. 36
Switching the Visual Input
Signal System .......................................... 36
Setting the Picture Output ........................... 36
Setting the Bluetooth Connection
(BLUETOOTH IN) ................................. 37
Setting the USB Adapter
(KCA-620M) to ON/OFF ........................ 37
Setting the VISUAL Soft Button ................ 37
Setting the Digital Output ........................... 37
Subwoofer On and Off ................................ 37
a
.u
m
o
c
.
RADIO Setup
0
13
Radio Setup Operation .................................... 33
RDS Time Display ...................................... 33
Adjusting Source Signal Levels .................. 33
PI SEEK Setting .......................................... 33
Receiving RDS Regional
(Local) Stations ........................................ 33
Switching the Display Language of PTY
(Programme Type) ................................... 33
Setting PTY31 (Emergency Broadcast)
Reception ................................................. 33
GENERAL Setup
General Setup Operation ................................ 34
Displaying the Time .................................... 34
Setting the Time .......................................... 34
Setting Daylight Saving Time ..................... 34
Demonstration Function .............................. 34
Sound (Beep) Guide Function ..................... 34
Setting the Scroll ......................................... 34
Switching to the Russian Font ..................... 34
2-EN
DISPLAY Setup
Display Setup Operation ................................ 37
Setting the Brightness of the
Backlighting ............................................ 38
Adjusting the Minimum Level of
Backlight .................................................. 38
Switching Background Textures ................. 38
Setting Automatic Wallpapers .................... 38
Switching the Font Back Display Colour ... 38
Turning the Touch Panel Vibration
ON or OFF ............................................... 38
Adjusting the Touch Panel .......................... 38
VISUAL EQ™
Visual EQ Setting Operation .......................... 39
Selecting the VISUAL EQ Mode
(Maker’s setting) ...................................... 39
Adjusting Brightness ................................... 39
Adjusting Colour of Picture ........................ 39
Adjusting Tint of Picture ............................. 40
Adjusting Image Contrast ........................... 40
Adjusting Picture Quality ........................... 40
Storing VISUAL EQ ................................... 40
Data Download
Downloading the BACKGROUND data ........ 40
Autogood products internet store http://130.com.ua
01GB03IVAW205TOCR.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 3 Wednesday, January 24, 2007 2:26 PM
Connection of an External Device
TUE-T200DVB Operation (Optional)
Operating the TUE-T200DVB (Optional) ......51
External Audio Processor (Optional)
Adjustment Procedure for Dolby Surround ... 41
Changer (Optional)
Setting the Speakers ....................................... 42
Controlling CD Changer (Optional) ...............51
Set MX Mode of the External Audio
Processor ..................................................... 42
Multi-Changer Selection (Optional) ...............52
X-OVER Adjustment ..................................... 43
Performing Time Correction Manually
(TCR) .......................................................... 43
USB Operation (Optional)
Controlling USB (Optional) ............................52
iPod® (Optional)
Phase Switching ............................................. 44
Playback ..........................................................53
Graphic Equalizer Adjustments ..................... 44
Searching for a desired Song ..........................53
Searching by artist name .............................53
Direct Search Function ...................................54
Parametric Equalizer Adjustments ................. 45
Setting Bass Sound Control ........................... 46
Setting Bass Compressor ............................ 46
Setting Bass Focus ...................................... 46
Speaker Setup ................................................. 46
Setting of Dolby Digital ................................. 47
Adjusting the acoustic image
(BI-PHANTOM) ..................................... 47
Mixing bass sound to the rear channel
(REAR MIX) ........................................... 47
Achieving powerful high volume sound
(LISTENING MODE) ............................. 47
Adjusting the speaker levels
(OUTPUT LEVEL) ................................. 47
Adjusting the DVD Level ............................... 48
Selecting Playlist/Artist/Album/Genre/
Composer/Podcast .......................................54
Random Play Shuffle (M.I.X.) .......................54
a
.u
Repeat Play .....................................................54
Information
m
o
c
.
0
13
Storing Settings in the Memory ..................... 48
Calling up the Preset Memory ........................ 48
About DVDs ...................................................55
Terminology ....................................................55
List of Language Codes ..................................57
List of Country Codes .....................................58
In Case of Difficulty .......................................60
Specifications ..................................................63
Using the Pro Logic II Mode ......................... 48
Installation and Connections
Linear PCM Setting ........................................ 49
Warning .................................................. 64
Navigation System (Optional)
Switching the Navigation Screen
(Optional) .................................................... 49
Portable Navigation System Operation
(Optional) .................................................... 49
Caution ................................................... 64
Precautions ........................................... 64
Installation ......................................................65
Connections ....................................................68
System Example .............................................70
Auxiliary Device (Optional)
Operating Auxiliary Devices (Optional) ........ 50
Autogood products internet store http://130.com.ua
3-EN
01GB03IVAW205TOCR.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 4 Wednesday, January 24, 2007 2:26 PM
Operating Instructions
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
WARNING
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous for the driver to watch TV/Video while driving a
vehicle. Installing this product incorrectly enables the driver to
watch TV/Video while driving. This may cause a distraction,
preventing the driver from looking ahead, thus causing an accident.
The driver or other people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
a
.u
Doing so may result in personal injury or damage to the product.
CAUTION
m
o
c
.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
0
13
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
4-EN
Autogood products internet store http://130.com.ua
01GB04IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 5 Wednesday, January 24, 2007 2:26 PM
New Discs
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
To prevent the CD from jamming, “DISC ERROR” is displayed if
discs with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Centre Hole
Centre Hole
New Disc
Moisture Condensation
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Outside
(Bumps)
Bumps
Damaged Disc
Installation Location
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Make sure the IVA-W205R/IVA-W202R will not be installed in a
location subjected to:
Maintenance
•
•
•
•
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
a
.u
Correct Handling
m
o
c
.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Inserting Discs
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
0
13
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“DISC ERROR” will be displayed on your player if you insert a
disc incorrectly. If “DISC ERROR” continues to be displayed even
though the disc has been inserted correctly, push the RESET switch
with a pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Irregular Shaped Discs
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
INCORRECT
CORRECT
CORRECT
Disc Cleaning
Fingerprints, dust or soil on the surface of the disc could cause the
DVD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the centre of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
Autogood products internet store http://130.com.ua
5-EN
01GB04IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 6 Wednesday, January 24, 2007 2:26 PM
Discs Playable on This Unit
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
DVD players.
Playable Discs
The discs listed below can be played on this unit.
Mark (logo)
Recorded Content
Disc size
12 cm*
DVD Video
Audio + Video
8 cm
12 cm*
DVD Audio
Transparent Sheet
Audio + Video
Disc Stabilizer
8 cm
• After turning the system off, a slight ghost of the image will
remain temporarily. This is an effect peculiar to LCD technology
and is normal.
• In cold temperature conditions, the screen may lose contrast
temporarily. After a short warm-up period, it will return to
normal.
12 cm
DIGITAL VIDEO
Video CD
Audio + Video
8 cm
Alpine products equipped with the Ai-NET bus, connected to the
IVA-W205R/IVA-W202R, can be operated from the
IVA-W205R/IVA-W202R. Depending on the products connected,
the functions and displays will vary. For details, consult your
Alpine dealer.
a
.u
m
o
c
.
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the IVA-W205R/
IVA-W202R. This has been done for the safety of the driver and
passengers.
Audio Processor Adjustments cannot be made if the car is moving.
The car must be parked and the parking brake must be engaged for
the procedure described in the Owner’s Manual to be valid. The
warning “CAN’T OPERATE WHILE DRIVING,” will be
displayed if any attempts are made to perform these operations
while driving.
0
13
Music CD
12 cm
Audio
8 cm
(CD single)
* Two-layer DVD disc compatible
The IVA-W205R/IVA-W202R draws minimal current even when
its power switch is turned off. If the switched power (ignition) lead
of the IVA-W205R/IVA-W202R is connected directly to the
positive (+) post of the vehicle’s battery, the battery may be
discharged.
An SPST (Single-Pole, Single-Throw) switch (sold separately) can
be added to simplify this procedure. Then, you can simply place it
in the OFF position when you leave the vehicle. Turn the SPST
switch back ON before using the IVA-W205R/IVA-W202R. For
connecting the SPST switch, refer to the “Connection Diagram of
SPST Switch (Sold Separately)” (page 67). If the power (ignition)
lead is unswitched, it must be disconnected from the battery post
should the vehicle be left unused for an extended period of time.
6-EN
Autogood products internet store http://130.com.ua
01GB04IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 7 Wednesday, January 24, 2007 2:26 PM
Discs that cannot be played
Tips for making your own CDs
DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA
files), photo CDs, etc.
The IVA-W205R/IVA-W202R plays DVD Video, DVD Audio,
Video CD, Audio CD and has a built in MP3/WMA decoder.
DualDisc
This unit is not compatible with DualDisc.
Using a DualDisc may cause unit malfunction, and may cause disc
damage when the disc is inserted/ejected.
DVD region number (playable region number)
This DVD player will play back any disc whose region number is 2
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
2
ALL
Video CDs
This DVD head unit is compatible with playback control (PBC)
compatible Video CDs (version 2.0).
“PBC” is a function by which you can use menu screens recorded
on the disc to find the scene you want to watch and view various
types of information in dialog style.
Using compact discs (CD/CD-R/CD-RW)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CD-ReWritables)
which have been recorded only on audio devices. You can also play
CD-Rs/CD-RWs containing MP3/WMA formatted audio files.
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA encoded CD-R/RW
files).
What is the difference between an Audio and MP3/WMA CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer
3)/WMA (Windows Media Audio) is a data file that uses a
compression scheme to reduce the size of the music file.*
Hybrid Audio CD and Data (MP3/WMA) CD-R/RW discs:
The IVA-W205R/IVA-W202R can read either sector on the disc.
Choose CD-DA to play the CD audio section or MP3/WMA to play
the MP3/WMA section.*
Multisession CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalized), additional data may be added.
Once this additional data has been recorded, this becomes a
“multisession” CD. The IVA-W205R/IVA-W202R can only read
multisession DATA Formatted discs (MP3/WMA files - Not Audio
CD files).
a
.u
Properly formatted MP3/WMA Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32
characters) or Joliet (Windows or Macintosh long filenames) file
naming conventions.*
m
o
c
.
0
13
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA files written in a format compliant
with this unit. For details, see pages 16 and 17.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
* Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
Autogood products internet store http://130.com.ua
7-EN
01GB04IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 8 Wednesday, January 24, 2007 2:26 PM
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
Disc terminology
• This unit is compatible with discs recorded in the DVD-Video
and DVD-VR mode.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format.
• Discs or files utilizing copy protection, may not be playable.
Some recording systems may not properly format copied files to
enable proper playback.
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
• “DTS” is a registered trademark of DTS, Inc. and “DTS 2.0 +
Digital Out” is a trademark of DTS, Inc.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, the Apple logo and iPod are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.”
• “Supply of this product only conveys a license for private,noncommercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com”
a
.u
m
o
c
.
0
13
8-EN
Autogood products internet store http://130.com.ua
01GB04IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 9 Wednesday, January 24, 2007 2:26 PM
TA/AUDIO button
Getting Started
Turns the T. INFO mode ON or OFF.
Press and hold for at least 2 seconds to recall the AUDIO
SETUP screen. Press and hold for at least 2 seconds to
cancel the T. INFO mode when the T. INFO mode is turned
on.
Accessory List
•
•
•
•
•
•
•
•
•
•
•
•
•
button
Head unit .............................................................................1
Power cable.........................................................................1
Remote cable ......................................................................1
Mounting sleeve ..................................................................1
Bracket key..........................................................................2
Flush Head Screw (M5 × 8) .................................................6
Screw (M5 × 8) ....................................................................8
Rubber Cap .........................................................................1
Hex Bolt ...............................................................................1
Face plate (7mm / 20mm) ...................................................2
Mounting Position Seal ........................................................2
Slot Securing Screw (M2 × 4) (IVA-W205R only)* ...............2
Owner’s Manual .............................................................1 set
* To customers who do not use an optional portable navigation:
If necessary, secure the slot panel with this screw.
IVA-W205R: Displays the EJECT/TILT screen.
IVA-W202R: Ejects a disc.
POWER indicator
Blinks when an operation is performed. However, turns off
when Beep is set to OFF.
About the button descriptions used in this Owner’s
Manual
• The buttons found on the face of the unit are expressed in bold
(e.g. SOURCE/ ). The buttons found on the touch-screen
display are shown in bold within brackets, [ ] (e.g. [SOURCE]).
• This Owner’s Manual explains mainly the function of soft
buttons, when a soft button and a unit button have the same
function.
Turning Power On or Off
a
.u
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
m
o
c
.
1
0
13
Connectable to Remote Control Interface Box
You can operate this unit from the vehicle’s control unit when an
Alpine Remote Control Interface Box (optional) is connected. For
details, contact your Alpine dealer.
Location of Controls
Press SOURCE/
to turn on the unit.
• The unit can be turned on by pressing any button. However, the
IVA-W202R cannot be turned on even if
(eject) is pressed.
2
Press and hold SOURCE/
to turn off the unit.
for at least 2 seconds
• The IVA-W205R/IVA-W202R is a precision device. With gentle
handling, its unique capabilities can be enjoyed for a long time.
• In low ambient temperature conditions, the display may be dim for a
short period of time immediately after the power is turned on. Once
the LCD has warmed up, the display returns to normal.
IVA-W205R: DOCK indicator
Lights when a portable navigation device is inserted into the
unit.
IVA-W202R: DISC indicator
Lights when a disc is inserted into the unit.
RESET switch
Be sure to press the RESET switch when using the unit for
the first time, after installing the CD changer, after changing
the car battery, etc.
Turn off the unit power, press RESET with a ballpoint pen or
similar pointed object.
/
button
Press to adjust the volume.
Remote Sensor
Point the optional remote control transmitter towards the
remote sensor within a range of 2 meters.
SOURCE/
button
Turns the power on. Press and hold for at least 2 seconds to
turn the power off.
Recalls the SOURCE selection screen.
Autogood products internet store http://130.com.ua
9-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 10 Wednesday, January 24, 2007 2:26 PM
Inserting/Ejecting a Disc
Adjusting the Monitor Viewing Angle
Adjust the monitor’s angle for better visibility.
IVA-W205R:
1
Press
IVA-W205R:
on the unit.
1
The display changes to the EJECT/TILT screen.
2
Press
on the unit.
The display changes to the EJECT/TILT screen.
Insert a disc:
Touch [OPEN] on the EJECT/TILT screen.
The movable monitor will open, then insert a disc into the
disc slot. Inserting a disc will close the monitor
automatically.
2
Touch [ ] or [
monitor angle.
] of TILT to adjust the desired
The monitor angle can be adjusted in 5 stages.
3
Touch [RETURN] to return to the previous screen.
IVA-W202R:
Disc Slot
1
Touch [SETUP] for the selected source on the main
screen.
The setup selection screen is displayed.
2
3
Eject the disc:
Touch [ ] of DISC on the EJECT/TILT screen.
The movable monitor will open. Then the disc is ejected.
3
IVA-W202R:
Insert the disc:
.
0
13
The movable monitor will open.
Insert disc in to Disc slot part.
Eject the disc:
Press
again.
Disc is ejected.
a
.u
Touch [RETURN] to return to the previous screen.
m
o
c
.
The movable monitor will close.
Press
Touch [ ] or [ ] of TILT to adjust the desired
monitor angle.
Pressing the buttons changes the screen angle by 5 stages.
4
Touch [CLOSE] on the EJECT/TILT screen.
Touch [DISPLAY].
• Touching [CONTROL] or [RETURN] return to the earlier main
source screen (IVA-W205R only).
• Do not apply shock to the movable monitor when it is open as it may
result in malfunction of the unit.
• The monitor may be dim during low temperature and immediately
after turning on the power. The brightness will return to normal as
time elapses.
• The monitor will stop at the set tilt angle when closing.
• This function is adjustable while driving.
• If the monitor touches an obstacle while the angle is being
adjusted, it will stop immediately.
• The screen colour will vary when viewed at certain angles.
Adjust the screen angle for the best viewing position.
• If the voltage of the vehicle’s battery power is low, the screen
may blink when the screen angle is changed. This is normal and
not a malfunction.
• Touching and holding [RETURN] for at least 2 seconds will
change to the main source screen.
Adjusting the Volume
Adjust the volume by pressing
or
.
Volume decreases/increases continuously by pressing and
holding
or
.
Volume: 0 - 35
• The MUTE function can be performed by using the optional remote
control.
CAUTION
Keep hands (or any other object) away from the monitor while it
is opening or closing to avoid damage or injury. The back of the
movable monitor will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
10-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 11 Wednesday, January 24, 2007 2:26 PM
2
How to view the Display
Touch [RADIO].
The screen changes to the Radio mode main display.
Display example for Radio (MW) main screen
Touchscreen operation
The display unit is equipped with tactile feedback (PULSETOUCH).
What is the tactile feedback (PULSETOUCH)?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
• Be sure to touch the button lightly with the pad of your finger on the
display to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display, and try again.
Changes to SETUP selection screen.
Changes to VISUAL selection screen.
Displays the source name, such as radio band, etc.,
that is selected.
Changes to the SOURCE selection screen (to Step 1
screen).
Working state indicator.
Displays volume level.
Function Guide:
About the button descriptions used in this Owner’s Manual
• Soft buttons, ones found in the display, are shown in bold
enclosed in brackets, [ ] (e.g. [SOURCE]).
• Whenever a soft button and a head unit button have the same
function, the explanations in this Owner’s Manual will describe
the function of the soft button.
a
.u
Recalling the Source
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]* or [P2/2]* on the function guide, and many other
operations can be performed.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
m
o
c
.
Touch [SOURCE] on the main screen.
The SOURCE selection screen is displayed.
Display example for SOURCE selection screen
0
13
Changes to main source screen.
Displays source modes that can be selected.
(The kind of source modes that are displayed varies
depending on connection and setting.)
Displays time.
* Display may vary depending on the connected devices.
3
Touch [SOURCE] on the main source screen to
change to another source screen, and select the
desired source from the SOURCE selection screen.
• The screen can be changed to the VISUAL selection screen by
touching [VISUAL].
Set to VISUAL in “Setting the VISUAL Soft Button” (page 37).
• The screen can be changed to the SETUP selection screen by
touching [SETUP].
• After 5 seconds of each operation in the visual mode, the screen
changes to the visual screen only.
To display the main source screen, touch the display panel, then
touch [CONTROL] on the screen. The SOURCE selection screen
appears by touching [SOURCE] on the changed main source screen.
Changes to the Rear selection screen when “Setting the
Picture Output” (page 36) is set to ON.
Returns to the previous screen.
• When the source icon is not displayed on SOURCE selection screen,
it is displayed on the next page.
Touching [ ] on the SOURCE selection screen will display the next
page; touching [ ] will return to the previous page.
Autogood products internet store http://130.com.ua
11-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 12 Wednesday, January 24, 2007 2:26 PM
Displaying the Numeric Keypad Input
Screen
Radio
The numeric keypad input screen is displayed when the DVD mode is
selected for searching a title or chapter, and also for entering a country
code or password for the DVD setup item.
1
2
Display example for Radio (MW) main screen
Touch [10KEY] on the main source screen.
Touch the desired numeric key.
Display example for numeric keypad
[SOURCE] button: Refer to page 11.
[VISUAL] button: Displays the VISUAL selection screen.
[SETUP] button: Displays the SETUP selection screen.
Displays the preset number/frequency.
a
.u
Listening to the Radio
Operation buttons of this area can be used while
displaying the numeric keypad input screen.
Input screen area.
Closes numeric keypad input screen.
All input numbers will be deleted.
Previous number will be deleted.
Input number is confirmed.
Numeric keypad.
The numeric keypad input screen closes when the area
is touched while displayed.
3
Touch [SOURCE] on the main source screen.
m
o
c
.
0
13
Touch [ENT] to confirm your entry.
1
The SOURCE selection screen is displayed.
2
Touch [RADIO].
The radio mode is activated and the display changes to the
Radio Mode screen.
3
Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
FM-1
4
FM-2
FM-3
MW
LW
FM-1
Touch [TUNE] to choose the tuning mode.
Each touch changes the tuning mode display.
Distance
Local
Manual
Distance
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode (with DX SEEK indicator ON);
Both strong and weak stations will be tuned in.
- Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
5
Touch [
], [
] or [
], [
] to change the
radio frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.
• You can search for a station by PTY (Programme Type) Tuning in the
FM radio mode. For operation, refer to “PTY (Programme Type)
Tuning” (page 14).
12-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 13 Wednesday, January 24, 2007 2:26 PM
Presetting Stations Manually
1
2
3
RDS Operation
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
Touch [P1/2] to change the function guide.
Touch and hold any one of the preset buttons
[P.SET 1] through [P.SET 6] for at least 2 seconds.
The selected station is stored.
4
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 30 stations can be stored in the preset memory (6
stations for each band; FM1, FM2, FM3, MW or LW).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorised.
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
The tuner automatically seeks and stores 6 strong stations into
[P.SET 1] to [P.SET 6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P.SET 1].
0
13
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
You can tune in the preset stations in memory on each band using the
preset number.
2
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SOURCE].
The source setup screen appears.
3
Touch [
] of RDS.
The display changes to the RDS mode screen.
Touch [AF] to select the AF (Alternative Frequency)
ON or OFF mode.
a
.u
• When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not required.
m
o
c
.
After selecting the desired band, touch [A.MEMO].
1
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
4
Presetting Stations Automatically
Tuning to Preset Stations
Turning AF (Alternative Frequencies) On
or Off
After selecting the desired band, touch [P1/2] to
change the function guide.
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has a station stored to it.
5
Tips
Touch [RETURN] to return to the previous screen.
• If the unit receives the PTY31 (Emergency Broadcast) signal, the unit
will show “ALARM” in the display only when PTY31 is set to on. For
operation, refer to “Setting PTY31 (Emergency Broadcast)
Reception” (page 33).
• The RDS digital data includes the following:
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
• Refer to page 33 about “PI SEEK Setting”, “Receiving RDS
Regional (Local) Stations”, “Switching the Display Language of
PTY (Programme Type)” and “Setting PTY31 (Emergency
Broadcast) Reception”.
The preset station is received.
Autogood products internet store http://130.com.ua
13-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 14 Wednesday, January 24, 2007 2:26 PM
Receiving Traffic Information
Press TA/AUDIO to turn on the Traffic Information
mode.
When the traffic information station is tuned in, the TA indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode.
When a traffic information broadcast begins, the unit
automatically receives it and the display shows “T. INFO.”
Receiving Traffic Information While
Playing CD or Radio
The example explained here is how to receive the traffic information
broadcast during CD playback.
1
The unit automatically starts to search the receivable traffic
broadcasts.
When the traffic information broadcast is searched out, the
CD mode is switched to the Radio mode and the unit
receives the traffic information broadcast.
When traffic information broadcast is over, the unit will
automatically set in the standby mode.
• If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 70 seconds, “TA” blink light
up in the display.
• If you do not want to listen to the traffic information being received,
press TA/AUDIO to skip that traffic information message.
The T. INFO mode will remain in the ON position to receive the next
traffic information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorised. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorised.
In the FM Radio mode, touch [PTY] on the RDS
mode screen.
0
13
The PTY mode is activated.
The Programme Type of the station being currently received
will be displayed.
2
• When the traffic information broadcast starts, the unit
automatically mutes the CD.
• When the traffic information broadcast finishes, the unit
automatically returns to the original source you were
playing before the traffic information broadcast began.
• The receiver is equipped with the EON (Enhanced Other Networks)
function so if the station being received does not broadcast the traffic
information, the receiver automatically tunes in the related station
that broadcasts the traffic information.
2
Touch [ ] or [ ] after activating the PTY mode to
choose the desired programme type while “PTY”
(programme type) is displayed.
Priority News
This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it begins
broadcasting, and interrupts the programme you are currently listening.
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
1
Each press scrolls the programme type by one.
3
a
.u
When the traffic information broadcast has finished,
the unit returns to the CD mode.
m
o
c
.
PTY (Programme Type) Tuning
1
In the CD mode, press TA/AUDIO to turn on the
Traffic information mode.
Touch [PTY] after selecting the programme type to
start searching for a station of the selected
programme type.
Touch [NEWS] to activate the PRIORITY NEWS
mode.
The “NEWS” indicator appears in the display. Touch
[NEWS] again to deactivate the Priority News mode and
return to the programme you were previously listening.
2
Touch [RETURN] to return to the previous screen.
If no station is found, “No PTY” will be displayed.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
2
Tune in a radio station that transmits text messages.
Touch [INFO.] in the FM radio mode to activate the
Radio Text mode.
The display shows “WAIT” for a few seconds.
3
To deactivate the Radio Text mode, touch [INFO.].
• If there is no receivable text message or the unit cannot receive a text
message properly, the display shows “NO TEXT”.
14-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 15 Wednesday, January 24, 2007 2:26 PM
Playback
CD/MP3/WMA
1
Display example for MP3/WMA main screen
Touch [SOURCE] on the main source screen.
The SOURCE selection screen is displayed.
2
Touch [DVD PLAYER].
The display shows the DVD player mode screen.
When a CD/MP3/WMA is inserted into the DISC SLOT of the
IVA-W205R/IVA-W202R, with the label side facing up, the
unit starts to play the CD/MP3/WMA.
3
Touch [
(file).
] or [
] to select the desired track
Returning to the beginning of the current track (file):
Touch [
].
Fast reverse:
Touch and hold [
[SOURCE] button: Refer to page 11.
[VISUAL] button: Displays the VISUAL selection screen.
[SETUP] button: Displays the SETUP selection screen.
[ ] button: Refer to page 27.
CD:
Displays the Track text*1/Disc text*1/Artist.
].
a
.u
To pause playback
].
/ ] again will resume playback.
m
o
c
.
MP3/WMA:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name in the lower line, the album
name/artist name are displayed if there is ID3 tag
information.
CD:
Fast forward:
Touch and hold [
Touch [ /
Touching [
• If there is neither Track nor Disc name information,
“NO TEXT” will be displayed.
].
Advancing to the beginning of the next track (file):
Touch [
].
0
13
Displays the disc number*2/track number/elapsed time.
MP3/WMA:
Displays the disc number*3/folder number/file number/
elapsed playback time.
*1 Displayed when a CD text disc is inserted.
*2 Displayed when a CD changer is connected.
*3 Displayed when an MP3 compatible CD changer is connected.
To eject the disc
IVA-W205R: Refer to “Inserting/Ejecting a Disc” (page 10).
IVA-W202R: Press .
• The IVA-W205R/IVA-W202R model includes a built-in MP3/WMA
unit. You can play CD-ROMs, CD-Rs, and CD-RWs containing
MP3/WMA files on this unit. Use the format compliant with this unit.
For further information about playing or storing MP3/WMA files,
refer to pages 16 and 17 before using the unit.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The unit can play discs containing both audio data and MP3/WMA
data.
• The MP3/WMA indicator is lit during MP3/WMA playback.
• The track display for CD audio data playback is the track numbers
recorded on the disc.
• Three-inch (8 cm) CDs can be used.
• “Playing MP3/WMA Data (File Play Mode)” is mentioned on
page 33.
• If an MP3/WMA disc with many files and folders is played, it takes a
little longer than normal to start playback.
• Touch [ ] to activate the search mode. For operations, refer to
“Search Function” on page 27.
However, the search mode function does not work in the CD changer
mode.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Autogood products internet store http://130.com.ua
15-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 16 Wednesday, January 24, 2007 2:26 PM
Repeat Play
About MP3/WMA
Touch [
] to play back repeatedly the track currently
being played.
The track (file) will be played repeatedly.
Touch [
] again and select OFF to deactivate Repeat play.
RPT DISC*1
CD: RPT
(off)
RPT
CAUTION
Except for private use, duplicating audio data (including
MP3/WMA data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
MP3/WMA:
1 Touch [P1/2]*3 to change the function guide.
2 Touch [
] and select the desired Repeat play.
RPT
RPT FLDR*2
RPT DISC*1
(off)
What is MP3?
MP3, whose official name is “MPEG-1, 2, 2.5 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
RPT
*1 If a CD Changer or an MP3 compatible CD changer is connected
and the RPT DISC mode is selected, the unit repeatedly plays back
all tracks (files) on the disc selected.
*2 Only files in a folder are repeatedly played back.
*3 Display may vary depending on the connected devices.
M.I.X. (Random Play)
Touch [
What is WMA?
] during playback.
The tracks (files) on the disc will be played back in a random
sequence.
To cancel M.I.X. play, touch [
CD: M.I.X.
(off)
M.I.X.
MP3/WMA:
0
13
1 Touch [P1/2]*4 to change the function guide.
2 Touch [
] and select the desired M.I.X. play.
M.I.X. FLDR*3
M.I.X.*2
(off)
M.I.X. FLDR*3
*1 If a CD Changer equipped with the M.I.X. ALL function is connected,
M.I.X. ALL will also be selectable.
In this mode, the tracks on all the CDs in the current magazine will
be included in the random playback sequence.
*2 If an MP3 compatible CD changer is connected, all files in a disc are
played back in random sequence, and playback shifts to the next disc.
*3 Only files in a folder are played back in random sequence in the
M.I.X. FLDR mode.
*4 Display may vary depending on the connected devices.
Selecting Folders (concerning MP3/
WMA)
Touch [
16-EN
FLDR] or [FLDR
a
.u
WMA, or “Windows media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
Method for creating MP3/WMA files
m
o
c
.
].
M.I.X. ALL*1
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
] to select the folder.
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user’s manual for that software.
MP3/WMA files that can be played back by this device have the
file extension “mp3” / “wma”. Files with no extension cannot be
played back. (WMA ver. 9 is supported.)
Supported playback sampling rates and bit rates
MP3
Sampling rates: 32 kHz ~ 48 kHz
Bit rates:
32 - 320 kbps
WMA
Sampling rates: 32 kHz ~ 48 kHz
Bit rates:
32 - 320 kbps
This device may not play back correctly depending on sampling
rates or bit rates.
ID3 tags/WMA tags
If tag data is in an MP3/WMA file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data
(maximum 128 characters).
This device can only display single-byte alphanumeric
characters and the underscore. For non-supported characters,
“NO SUPPORT” is displayed.
The number of characters may be limited, or not correctly
displayed, depending on the tag information.
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 17 Wednesday, January 24, 2007 2:26 PM
Terminology
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CD-RW
(DVD-R/DVD-RW) using CD-R writing software. A disc can hold
up to 1,024 files/256 folders (including Root Folders).
Depending on the structure of the folders or files, it may take
time to read a disc. In this case, it is recommended to decrease
the number of folders or files.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs,
CD-RWs, DVD-Rs and DVD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, etc., and other
standards that conform to ISO9660. However, sometimes the file
names, folder names, etc., are not displayed correctly.
Formats supported
This device supports CD-ROM, CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
WMA: WMA tag
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
a
.u
m
o
c
.
Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be
what’s expected. Verity the writing order in the software’s
documentation. The playback order of the folders and files is as
follows.
(The following numbers may differ from actually displayed
numbers.)
Root
Folder
Folder
0
13
MP3/WMA File
Autogood products internet store http://130.com.ua
17-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 18 Wednesday, January 24, 2007 2:26 PM
Playing a Disc
DVD/Video CD
IVA-W205R/IVA-W202R has a built-in DVD player. When an optional
Alpine DVD/Video CD/CD player (or DVD changer) is connected to
the IVA-W205R/IVA-W202R, you can control it from the
IVA-W205R/IVA-W202R. (except some operations)
Display example for DVD Video main screen
WARNING
It is dangerous for the driver to watch the TV/DVD/
Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could
occur.
[SOURCE] button: Refer to page 11.
[VISUAL] button: Displays the VISUAL selection screen.
[SETUP] button: Displays the SETUP selection screen.
Displays the disc (DVD VIDEO, DVD AUDIO,
PROGRAM/PLAYLIST (DVD-VR), VIDEO CD) being
played back.
Displays the title number/chapter number/elapsed
playback time for a DVD Video.
Displays the group number/track number/elapsed playback
time for a DVD Audio.
Displays the programme or playlist number/chapter
number/elapsed playback time for a DVD-VR.
Displays the track number/elapsed playback time for a
Video CD (When PBC is turned off).
• Some operations cannot be carried out depending on the disc or
playback screen.
• Displays of the function guide [P1/2], etc., may vary depending on
the connected device(s).
If the IVA-W205R/IVA-W202R is not installed correctly,
the driver will be able to watch the TV/DVD/Video
while driving the vehicle and may be distracted from
looking ahead causing an accident. The driver or
other people could be severely injured.
a
.u
To display the DVD mode screen
m
o
c
.
0
13
Disc types that can be used for each heading are
represented by the following marks.
Install the IVA-W205R/IVA-W202R correctly so that
the driver cannot watch TV/DVD/Video unless the
vehicle is stopped and the emergency brake is
applied.
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVDRW, DVD+R/DVD+RW recorded in a video
mode can be used.
(Including a disc recorded with both DVD
video and DVD audio data, played back
when “VIDEO” is set in “Setting of the DVDAudio Playback Mode” on page 32.)
DVD Commercial Audio discs can be used.
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
Caution
• Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
• Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
• If you switch the power or Ignition key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
• If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
DVD-R/DVD-RW discs recorded in DVD-VR
mode can be used.
Video CD discs can be used.
18-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 19 Wednesday, January 24, 2007 2:26 PM
• Play Position Memory Function
Even if you turn power off or switch the Ignition key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.
1
Touch [SOURCE] on the main source screen.
The SOURCE selection screen is displayed.
2
If a menu screen appears
On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the DVDAudio Playback Mode” (page 32).
Direct Menu Operations
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Touch [DVD PLAYER].
The display shows the DVD player mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
Menu Operations
When an optional Alpine DVD player is connected:
Insert a disc into the DVD/Video CD/CD player, the player
starts playing.
• The operation screen changes to the visual screen in the DVD or
Video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see “Switching Display Modes” on page 28.
a
.u
1 Touch [KEY].
The menu operation mode will be displayed.
To eject the disc
IVA-W205R: Refer to “Inserting/Ejecting a Disc” (page 10).
IVA-W202R: Press .
m
o
c
.
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• DO NOT insert discs containing maps for the navigation system.
Doing so could result in damage.
• Refer also to “DVD Setup” (pages 29 to 33).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• To return to the previous screen during Video CD playback (when
PBC is set to ON), touch [RETURN] after touching [P1/2] of the
function guide. However, the function may vary depending on the
disc.
• “CAN’T DOWNMIX” is displayed when a Downmix (multi-channel
signals are mixed into 2 ch) prohibited section of a DVD-Audio disc
is played. In this case, only the Lch/Rch recorded on the disc is
output as sound. (The sound of Centre speaker, L-surround speaker,
R-surround speaker and Subwoofer is not output.)
0
13
Touch [RETURN] to return to
the previous display.
2 Select a desired menu item by touching [ ], [
[ ].
3 Touch [ENTER] to confirm the selected item.
Autogood products internet store http://130.com.ua
], [
] or
19-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 20 Wednesday, January 24, 2007 2:26 PM
Numeric Keypad Input Operations
Displaying the Menu Screen
With a DVD having two or more menus, a menu screen will appear for
the programmes available, in addition to the main programmes.
Touch [MENU] on the DVD mode main screen.
The menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 19.
Displaying the Menu Operation Mode
Screen
1 Touch [KEY].
The menu operation mode appears.
2 Touch [KEY] again.
The numeric keypad input mode screen appears.
1
Touch [P1/2]* on the DVD mode main screen.
The function guide changes.
* Touch [P1/3] while playing a DVD-Audio disc.
2
Touch [MENU CONT].
The menu operation mode screen appears.
The numeric
keypad input
screen closes
when the area
is touched
while
displayed.
• For further operation, see “If a menu screen appears” on page 19.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the DVDAudio Playback Mode” (page 32).
a
.u
Searching by Programme
Touch [RTN] to close the numeric
keypad input screen.
Numeric Keypad Input Operations
1
0
13
The programme search list screen is displayed.
2
Displaying the Top Menu Screen
Touch [
] of the programme you want to play.
The selected programme is played back, and then returns
to the DVD mode main screen.
When PBC is turned OFF, the menu screen is not displayed. Turn it ON
to display the screen. (See “Setting the Video CD Play Mode” on
page 33.)
1 Touch [P1/2] in the Video CD mode to change the
function guide.
2 Touch [10KEY].
The numeric keypad is displayed.
3 Touch and input a desired number.
4 Touch [ENT] to confirm.
Touch [TOP MENU] on the DVD mode main screen
while playing a DVD-VR disc.
m
o
c
.
3 Touch a desired number.
4 Touch [ENT] on the numeric keypad mode screen to
confirm your selection.
Searching by Playlist
1
Touch [MENU] on the DVD mode main screen while
playing DVD-VR disc.
The playlist search list screen is displayed.
2
Touch [
] of the playlist you want to play.
The selected playlist is played back, and then returns to the
DVD mode main screen.
• Only discs containing a Playlist can be operated.
When a DVD contains two or more titles, the top menu screen appears.
Touch [TOP MENU] on the DVD mode main screen.
The top menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 19.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the DVDAudio Playback Mode” (page 32).
20-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 21 Wednesday, January 24, 2007 2:26 PM
Stopping Playback (PRE STOP)
Finding the Beginnings of Chapters or
Tracks
Press the stop button during playback to stop playback. That position is
stored in the memory.
During playback, touch [
1
Touch [ ] once during playback.
Touch [
/
] in the PRE STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the DVDAudio Playback Mode” (page 32).
].
:Touch this to start playback from the beginning of the
following chapter or track.
:Touch this to start playback from the beginning of the
current or previous chapter or track.
“PRE STOP” is displayed.
2
] or [
The chapter/track switches each time the button is touched, and
playback of the selected chapter/track starts.
• Some DVDs do not have chapters.
• Be sure to turn PBC off before starting the search. (See “Setting the
Video CD Play Mode” on page 33.)
Supplementary explanations
Stopping Playback
Touch [ ] twice or touch and hold [ ] for at least 2
seconds during playback.
“STOP” is displayed, and playback stops.
• Playback starts from the beginning when [
playback is stopped.
/
] is touched while
Playing Still Frames (Pausing)
0
13
DVD-Video, DVD-VR, Video-CD, DVD-Audio (VCAP
mode)*:
During playback, touch and hold [
reverse) or [
] (fast-forward).
] (Fast-
When touched and held for more than 1 second, the disc is
forwarded/reversed at double speed. When held for 5 more
seconds or longer, the disc is forwarded/reversed at 8 times
the normal speed. When held for 10 seconds or longer, the
disc is forwarded/reversed at 21 times the normal speed.
DVD-Audio (VOFF mode)*:
1
During playback, touch and hold [
reverse) or [
] (fast-forward).
a
.u
m
o
c
.
Fast-forward/Fast-reverse
1
“Chapters” are divisions of movies or musical selections on
DVDs.
“Tracks” are divisions of movies or musical selections on
Video CD, DVD Audio and music CDs.
“Groups” associate a track (one song) with other tracks
stored on a DVD-Audio.
Group playback differs, depending on the disc.
“Playlists” specify a range of images and their playback
order.
Only discs containing a Playlist can be used.
] (Fast-
1
2
During playback, touch [
Touch [
/
/
].
] to resume playback.
• No sound is played during the still frame mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
Forward/reverse frame-by-frame
Playback
1
In the pause mode, touch [
] or [
].
The picture advances or reverses by one frame each time
the button is touched.
2
Stop touching [
playback.
] or [
] to return to normal
* When “VCAP” or “VOFF” is set in “Setting of the DVD-Audio
Playback Mode” (page 32).
2
Touch [
/
] to return to normal mode.
• No sound is output during forward/reverse frame-by-frame playback.
• Reverse frame-by-frame cannot be carried out on the DVD-VR and
Video CD.
• No sound is played back during fast-forwarding/fast-reversing.
• This operation may not be possible on certain discs.
Autogood products internet store http://130.com.ua
21-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 22 Wednesday, January 24, 2007 2:26 PM
Slow Motion Playback
Repeat Playback
1
Use this function to play the disc’s titles, chapters or tracks etc.,
repeatedly.
2
When [
] or [
] is touched and held while in
the pause mode, the 1/8th speed slow motion
playback mode is set.
When held in for 5 more seconds, the slow motion
speed switches to 1/2 the normal speed.
DVD Video
1
Touch [
] on the touchscreen.
The repeat mode switches every time the button is touched.
Stop touching [
] or [
[ / ] to play back.
] to pause, and touch
The chapter is played repeatedly.
• No sound is played during slow motion playback.
• Reverse slow motion playback is not available on the DVD-VR and
Video CD.
• 1/2, 1/8 are approximate speeds. The actual speed differs from disc to
disc.
Touch [P1/3] twice while playing a DVD-VR disc.
Video CD
The PROGRAM function guide is displayed.
2
Touch PROGRAM* [
programme.
] or [
1
] to select a
1
2
a
.u
During playback, touch [
] on the touchscreen.
The repeat mode switches every time the button is touched.
* To switch the function guide display PLAYLIST [ ] or [
PROGRAM [ ] or [ ], play back the programme. For
details, refer to “Searching by Programme” (page 20).
Selecting Playlist (SKIP)
Playback returns to normal mode.
• Display may vary depending on the connected devices.
• The REPEAT mode is always turned off when [
] is touched and
held for at least 2 seconds.
Selecting Programme (SKIP)
1
The title is played repeatedly.
] to
0
13
m
o
c
.
The track is played repeatedly.
The disc is played repeatedly.
*
Playback does not repeat.
Touch [P1/3] twice while playing a DVD-VR disc.
* Displayed only in the changer mode.
The PLAYLIST function guide is displayed.
• Display may vary depending on the connected devices.
• The track/disc repeat modes cannot be used on Video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off. See “Setting the Video CD Play Mode” on page 33.
• For some discs it is not possible to switch the repeat mode.
Touch PLAYLIST* [
] or [
] to select a playlist.
* To switch the function guide display PROGRAM [ ] or [ ]
to PLAYLIST [ ] or [ ], play back the playlist. For details,
refer to “Searching by Playlist” (page 20).
22-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 23 Wednesday, January 24, 2007 2:26 PM
DVD Audio
1
Touch [
] on the touchscreen.
The repeat mode switches every time the button is touched.
VCAP mode*1:
Searching by Title/Group/Programme/
Playlist Number
Use this function to easily find positions on the DVD using the DVD’s
titles, groups, programmes or playlists.
REPEAT
The track is played repeatedly.
REPEAT GROUP
The group is played repeatedly.
REPEAT OFF
Playback returns to normal mode.
1
Touch [P1/2]* while playback is stopped.
The function guide appears.
* Touch [P1/3] while playing a DVD Audio or DVD-VR disc.
2
Touch [10KEY].
The numeric keypad input mode screen appears.
3
VOFF mode*1:
RPT
The track is played repeatedly.
RPT GROUP
The group is played repeatedly.
(off)
The disc is played repeatedly.
Enter a desired title, group, programme or playlist by
touching its title, group, programme or playlist
number.
See page 20 for operation of the numeric keypad.
*1 When “VCAP” or “VOFF” is set in “Setting of the DVD-Audio
Playback Mode” (page 32).
DVD-VR
1
Touch [
] on the touchscreen.
The Programme mode*2:
REPEAT
The chapter is played
repeatedly.
REPEAT PROGRAM
The programme is played
repeatedly.
REPEAT DISC
All programmes are played
repeatedly.
The Playlist mode* :
0
13
REPEAT
The chapter is played
repeatedly.
REPEAT PLAYLIST
The playlist is played
repeatedly.
REPEAT DISC
All playlists are played
repeatedly.
Confirm your selection by touching [ENT].
Playback will start from the title number selected.
• To switch the Programme mode display to the Playlist mode display
on the DVD mode main screen, play back via programme or playlist
search. Refer to “Searching by Programme” or “Searching by
Playlist” (page 20).
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of PRE STOP.
• Some disc may not accept any operation.
a
.u
m
o
c
.
The repeat mode switches every time the button is touched.
2
4
*2 To switch the Programme mode display to the Playlist mode display
on the DVD mode main screen, play back via programme or playlist
search. Refer to “Searching by Programme” or “Searching by
Playlist” (page 20).
• Only discs containing a Playlist can be displayed.
Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
Touch [P1/2]* in any mode other than stop mode.
The function guide will appear.
* Touch [P1/3] while playing a DVD-VR disc or DVD-Audio disc.
2
Touch [10KEY].
The numeric keypad input mode screen will appear.
3
Touch and enter the chapter or track number you
want to play.
See page 20 for operation of the numeric keypad.
4
Touch [ENT] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
• Be sure to turn PBC off before starting the search. (See “Setting the
Video CD Play Mode” on page 33.)
• For a Video CD disc, a track number can be selected even in the stop
mode.
Autogood products internet store http://130.com.ua
23-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 24 Wednesday, January 24, 2007 2:26 PM
Switching the Angle
Switching the Audio Tracks
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
During playback, touch [P1/2]*.
1
The function guide changes.
* Touch [P1/3] while playing a DVD-Audio.
2
DVDs with multiplex audio or audio languages allow switching the
sound during playback.
*1 The display differs according to the disc (mode).
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the
DVD-Audio Playback Mode” (page 32).
Scroll to Move the Page Forward or Back
2
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
Video CDs or DVD-VR disc with multiplex audio
Touch [P1/3] twice while playing a DVD-Audio disc
in VCAP mode*.
] or [
].
0
13
The display switches.
Touch and hold to display the home page.
a
.u
*2 Touch [P1/3] while playing a DVD-VR disc.
2
m
o
c
.
* To play back a DVD-Audio disc, set “VCAP” in “Setting of the
DVD-Audio Playback Mode” (page 32).
Touch PAGE [
During playback, touch [P1/2]*2.
The function guide changes.
“Page” is a still image stored on a DVD-Audio disc.
2
Touch [AUDIO].
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
1
1
During playback, touch [P1/2]*1.
Touch [AUDIO]*3.
The left and right channels will be output as shown below,
each time the button is touched.
*3 Touch [AUDIO] for at least 2 seconds to switch while playing a
DVD-VR disc.
AUDIO LL
AUDIO RR
AUDIO LR
AUDIO LL
• For DVD-Audio discs without pages, depending on the DVD-Audio
disc, the “Page” function may not be operable if images are in slide
show form.
24-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 25 Wednesday, January 24, 2007 2:26 PM
Switching the Subtitles (Subtitle
Language)
Displaying the Disc Status for DVD/Video
CD
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
Use the procedure described below to display the status (title number,
chapter number, group number, etc.) of the currently playing DVD or of
the currently playing Video CD (track number, etc.) on the monitor.
1
1
During playback, touch [P1/2]*.
The function guide changes.
The operation menu screen is displayed.
* Touch [P1/3] while playing a DVD-Audio or DVD-VR disc.
2
During playback, touch the display panel.
2
Touch [CONTROL] within 5 seconds.
The display status is displayed for 5 seconds.
Touch [SUBT.].
Touching this button repeatedly selects sequentially the
subtitle languages recorded on the disc, and then turns the
subtitles OFF.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the DVDAudio Playback Mode” (page 32).
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc’s default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
OFF. However, the subtitle language may differ depending on the
disc.
• Switches the subtitles ON/OFF while playing a DVD-VR disc.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the DVDAudio Playback Mode” (page 32).
a
.u
m
o
c
.
Switching from the disc menu
0
13
For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
2
Touch [MENU] or [TOP MENU] to display the
menu.
Select an item to confirm it.
See “If a menu screen appears” on page 19.
Autogood products internet store http://130.com.ua
25-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 26 Wednesday, January 24, 2007 2:26 PM
Adjusting the Subwoofer Level
Other Useful
Features
Touch [ ] or [ ] of SUBW. to adjust the subwoofer
output.
Setting range: 0 to 15
• The level adjustment becomes available when subwoofer is turned on
in “Subwoofer On and Off” (page 37).
Adjusting H.P.F. (High Pass Filter)
Adjusting the Audio
1
Touch [
Touch [
Touch [SETUP] on the main source screen.
Setting range: OFF , 80 Hz, 120 Hz, 160 Hz
The SETUP selection screen is displayed.
2
] to display the H.P.F. adjusting screen.
] or [ ] to adjust the desired speaker.
• Select OFF when no adjustment is required.
• The H.P.F. item is not displayed when an External Audio Processor is
connected.
Touch [AUDIO].
The AUDIO SETUP screen appears.
Display Example for Audio Adjustment Screen
Adjusting Bass/Treble
You can change the bass/treble frequency emphasis to
create your own tonal preference.
Touch [
Touch [
by line.
• Touching [CONTROL] will change to the main source screen.
Setting range: F15 to R15
0
13
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
Adjusting the Balance/Fader Directly
Touch and move [
• Adjustment cannot be performed when an external audio processor is
connected and DEFEAT is set to ON.
• When an external processor is connected, the display changes from
“BASS/TRE.”to the “A.PROC.”item. For “A.PROC.”operation, refer
to “External Audio Processor (Optional)”on page 41.
a
.u
m
o
c
.
Adjusting the Fader
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Adjusting the Balance
] to display the Bass/Treble adjusting screen.
] or [ ] on the scroll bar to scroll the setup items line
] to a desired setting.
Or touch a desired setting range, and [ ] will move to that
location.
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Turning Defeat ON or OFF
Touch [ON] or [OFF] of DEFEAT to set to ON or OFF.
If you set the defeat to ON, MX of an external audio processor is
turned OFF and EQ is returned to the initial setting.
Adjusting NAV. Level
Setting the Bass level:
You can emphasize or weaken the bass frequency.
Touch [
level.
] or [
] of BASS LEVEL to select the desired bass
Setting range: -7 to +7
Setting the Bass Centre Frequency:
The displayed bass frequency is emphasized.
Touch [ ] or [ ] of BASS FREQ to select the desired bass
centre frequency.
Setting range: 60 Hz, 80 Hz, 100 Hz, 200 Hz
Setting the Bass Bandwidth:
Changes the boosted bass bandwidth to wide or narrow.
A wider setting will boost a wide range of frequencies
above and below the centre frequency. A narrower
setting will boost only frequencies near the centre
frequency.
Touch [ ] or [ ] of BASS BANDWIDTH to select the desired
bass band width.
Setting range: WIDE1 to WIDE4
Touch [ ] or [ ] of NAV. to adjust the volume of
navigation interruption.
Setting range: 0 to 15
• The bass level settings will be individually memorised for each
source (FM, MW, LW, CD, etc.) until the setting is changed. The bass
frequency and bass band width settings adjusted for one source are
effective for all other sources (FM, MW, LW, CD etc.).
• This adjustment becomes available when NAV. MIX is turned on in
“Setting the Navigation Interruption” (page 36).
• The setting navigation interruption is not displayed if an external
audio processor not compatible with NAV. MIX is connected.
26-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 27 Wednesday, January 24, 2007 2:26 PM
UP/DOWN scroll indicator
Turns orange when the slide bar is used.
Touch [RETURN] to return to the previous list screen.
Setting the treble level:
You can emphasize the treble frequency.
Touch [
level.
] or [
] of TREBLE LEVEL to select the desired treble
Setting range: -7 to +7
Setting the Treble Centre Frequency:
The displayed treble frequency is emphasized.
Touch [ ] or [ ] of TREBLE FREQ to select the desired treble
centre frequency.
• The search function does not work on the DVD, Video CD or CD
changer. (If [TOP MENU] or [MENU] is touched in the DVD-VR
mode, the unit changes to the search function. Refer to “Searching by
Programme” and “Searching by Playlist” (page 20).)
• A folder list is displayed only during MP3/WMA playback when the
DVD player (DVA-5210) or changer compatible with MP3 is
connected.
Internal CD player mode
Setting range:10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz
1 The track list* screen appears.
• The treble level settings will be individually memorised for each
source (FM, MW, LW, CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW, LW, CD, etc.).
2 Touch [ ] of a desired track text*.
The selected track will be played back.
* If the CD is text compatible only.
• “TRACK” is displayed in the track text list if there is no text
on the disc.
Setting the Loudness:
Loudness introduces a special low- and high-frequency
emphasis at low listening levels. This compensates for
the ear’s decreased sensitivity to bass and treble sound.
Touch [ON] or [OFF] of LOUDNESS to set to ON or OFF.
Internal MP3/WMA Player/external MP3-compatible DVD
Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
].
([
] appears only when a file is present in the selected
folder.)
The file list screen is displayed.
a
.u
Search Function
1
• Touch [
Touch [ ] on the function guide while in the CD or
MP3/WMA mode.
m
o
c
.
The search list screen is displayed.
Select a desired track or folder.
Touch [
] for direct playback.
0
13
When a hierarchical list is prepared, [
] will be
displayed. Touch [
] to display the respective
hierarchy list screens.
Display Example for Search Screen
] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.
Rear Entertainment Function
The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
1
Touch [SOURCE] on the main source screen.
The SOURCE selection screen is displayed.
2
Touch [REAR].
Rear Select display appears.
• Touching [MAIN] on the Rear Select screen will change to the
main source screen.
3
[
] is displayed if there is a hierarchical list.
Select directly by touching [ ], and its track (or folder/
file) is played back.
Scroll the list one paragraph at a time by touching [ ]
or [ ].
Touch and slide up or down to scroll the list backwards
or forwards.
Touch the desired source such as visual (auxiliary
input, built-in DVD) to select.
• Touch [OFF] to cancel the rear entertainment function.
• When the “Setting the AUX Mode” (page 36) is set to OFF, the
auxiliary source is not displayed.
Autogood products internet store http://130.com.ua
27-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 28 Wednesday, January 24, 2007 2:26 PM
Cancelling the Visual Select Function
Switching Display Modes
While your vehicle is parked, touch [WIDE] on the visual
source screen.
Each touch changes the display modes as follows:
MODE 1
(WIDE)
MODE 2
(CINEMA)
MODE 3
(NORMAL)
MODE 1
(WIDE)
1
2
3
Touch the visual screen to display the main control.
Touch [CONTROL].
Touch [VISUAL] within 5 seconds.
The VISUAL selection screen appears.
4
Touch [NORMAL].
The simultaneous function is cancelled.
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16:9 ratio.
• To make the setting, set to “Setting the VISUAL Soft Button”
(page 37).
• If a DVD player is connected, you can receive the DVD picture/
sound.
DVD changer (DHA-S680P) is connected:
Press and hold V.OUT on the remote control supplied with the DVD
player or DVD changer for more than 2 seconds. The picture and
sound of the DVD will be output.
The DVA-5210 is connected:
Press V.OUT on the remote control (included with the DVA-5210) to
output DVD picture/sound.
• The simultaneous function cannot be used when the Audio source is
in the navigation mode.
When NAV. is set in “Setting the VISUAL Soft Button” (page 37),
only the navigation screen can be recalled.
a
.u
Blackout Mode On and Off
m
o
c
.
0
13
In Mode 3 (Normal), the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.
Switching the Visual Source Only
(Visual Select)
When Blackout mode is turned on, the monitor display will turn off to
reduce power consumption.
This additional power enhances the sound quality.
1
Touch [VISUAL] on the main source screen.
The VISUAL selection screen is displayed.
2
Touch [OFF].
The backlit-display portion goes out.
3
Touch [OFF] again to cancel the display backlight.
• To make the setting, set to “Setting the VISUAL Soft Button”
(page 37).
• If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
You can watch the video portion of another source while listening to the
current source.
1
Touch [VISUAL] on the audio source screen.
The VISUAL selection screen appears.
2
Touch a desired visual source.
The visual source is switched to the selected one.
28-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 29 Wednesday, January 24, 2007 2:26 PM
Setup
DVD Setup
DVD Setup Operation
The Parking Brake must be engaged to access the DVD
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The numeric keypad input screen closes when the area
is touched while displayed.
Numeric keypad input screen
The numeric keypad is used if you want to play back in
a language other than that displayed, or to input your
parental lock password, etc.
The DVD Setup operation can be carried out after removing the
disc from the unit.
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SOURCE].
Touch [
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
a
.u
m
o
c
.
] of DVD SETUP.
Changing the language setting
The DVD setup screen appears.
4
Touch [RETURN] to return to the previous screen.
• Immediately after changing the settings of DVD mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
The SOURCE SETUP screen appears.
3
5
Touch [ ] or [ ], etc., of the desired item to change
its setting.
0
13
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT MODE /
DOWNMIX MODE / TV SCREEN / BONUS CODE /
DVD-A SETUP / FILE PLAY MODE / PBC
Display example for DVD setup screen
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
when you always want to listen in English. (The language setting is not
effective on some discs. If not, the default language is set from the
factory.)
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 24).
• If the disc does not include the selected language, the disc’s default
language is set.
Setting of the Menu Language
Set the language used for the menus (title menu, etc.).
Setting item: MENU LANGUAGE
Setting contents: AUTO / ENGLISH / JAPANESE / GERMAN /
SPANISH / FRENCH / ITALIAN / SWEDISH / RUSSIAN / CHINESE
• When “AUTO” is selected, the primary menu language among the
recorded ones is played.
Touch [ ] or [ ] to set a desired language.
Touch [CODE] to display the numeric keypad input
screen.
Touch [ ] or [ ] to scroll a setting item list by one line.
Touch and slide up or down to scroll the list backwards
or forwards.
Setting of the Audio Language
Set the audio language produced from the speakers.
Setting item: AUDIO LANGUAGE
Setting contents: AUTO / ENGLISH / JAPANESE / GERMAN /
SPANISH / FRENCH / ITALIAN / SWEDISH / RUSSIAN / CHINESE
• When “AUTO” is selected, the primary audio language among the
recorded ones is played.
Autogood products internet store http://130.com.ua
29-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 30 Wednesday, January 24, 2007 2:26 PM
Setting of the Subtitle Language
Set the language of the subtitles displayed on the screen.
Setting item: SUBT. LANGUAGE
Setting contents: AUTO / ENGLISH / JAPANESE / GERMAN /
SPANISH / FRENCH / ITALIAN / SWEDISH / RUSSIAN / CHINESE
• When “AUTO” is selected, the primary subtitle language among the
recorded ones is played.
To play in a language other than those displayed
1 Touch [CODE].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
As for the language number, refer to “List of Language
Codes” (page 57).
3 Touch [ENT] to memorise the number.
Changing the Country Code Setting
Set the country number of which you want to set the rating level
(Parental lock).
1 Touch [INPUT].
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111.
Input number are displayed as “*”.
3 Touch [ENT] to memorise the number.
The PARENTAL screen appears.
Set the rating level of PARENTAL
4 Touch [ON] of PARENTAL to turn on.
5 Touch [ ] or [ ] of PARENTAL LEVEL to select the rating
level (1 to 8).
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Touch [RETURN] to return to the previous screen.
Changing the password
4 Touch [INPUT] of PASSWORD CHANGE.
The numeric keypad screen is displayed.
5 Touch the input screen to enter a new 4-digit password.
• Keep a note of the number somewhere safe in case you should
forget it.
6 Touch [ENT] to memorise the number.
7 Touch [RETURN] to return to the previous screen.
Setting item: COUNTRY CODE
Setting contents: AUTO / OTHER
The primary country code among those recorded is
played.
OTHER: The setting content changes to “OTHER” if the desired
country code is input.
AUTO:
a
.u
Changing the rating level temporarily
Some discs may request that you change the rating level set in
the default settings during playback. In this case, the message
appears on the monitor screen “PARENTAL LEVEL CHANGE OK?
[YES] / [NO].”
m
o
c
.
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are cleared when the vehicle’s battery is disconnected.
1 Touch [CODE].
2 Touch [ALL DEL] or [BS].
Delete the displayed country number.
3 Touch the 4-digit country code.
As for the country number, refer to “List of Country
Codes” (pages 58 and 59).
4 Touch [ENT] to memorise the code.
0
13
Setting the Rating Level (Parental Lock)
This function can help restrict the viewing of movies to children of
appropriate age levels only.
Setting item: PARENTAL
Setting content: INPUT
• To change parental level and play, touch [YES].
When [YES] is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in “Setting the Rating Level
(Parental Lock)” you set, then touch [ENT].
• To play without changing the parental level, touch [NO].
(When [NO] is touched, playback will be at the parental level set
in “Setting the Rating Level (Parental Lock)”.)
Changing the Digital Output Setting
Use the following procedure to set the digital audio signal output from
the IVA-W205R/IVA-W202R.
Setting item: DIGITAL OUT MODE
Setting contents: AUTO / LPCM
AUTO:
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• If you want to play back DVD software with the parental lock feature
and its use is currently restricted, change the rating level and the
country number in order to play back the DVD.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
30-EN
If this screen appears, change the level as follows:
LPCM:
The digital output is switched automatically according
to the type of audio signals being played.
Be sure to select “AUTO” when you want to connect a
digital audio processor and play Dolby Digital audio.
“AUTO” is the factory setting.
The audio signals recorded on the disc are converted
to 48 kHz/16 bit (for DVDs) or 44.1 kHz (for Video CDs
and CDs) linear PCM audio signals for output.
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 31 Wednesday, January 24, 2007 2:26 PM
Audio output/Optical digital audio output
Disc
Audio recording format
Digital output setting
(DVD SETUP)
Optical digital audio
output
Analogue audio output
(Ai-NET, RCA output)
Format
Fs
Q
LPCM
(CD-DA,
DVD-V, DVDA, DVD-VR)
44.1/176.4 kHz
16/20/24 bit
AUTO or LPCM
44.1 kHz, 16 bit, LPCM
2 ch (2 ch Downmix)*
OK
48/96/192 kHz
16/20/24 bit
AUTO or LPCM
48 kHz, 16 bit, LPCM
2 ch (2 ch Downmix)*
OK
PPCM
(DVD-A)
44.1/88.2/
176.4 kHz
16/20/24 bit
AUTO or LPCM
Not output
OK
48/96/192 kHz
16/20/24 bit
Dolby Digital
(-EX)
(DVD-V, DVDA, DVD-VR)
48 kHz
16/18/20 bit
LPCM
48 kHz, 16 bit, Decoded
2 ch (2 chDownmix)*
OK
AUTO
Auto (Max 7.1 ch)*
OK
DTS (-ES)
(CD-DA,
DVD-V, DVDA)
44.1 kHz
LPCM
44.1 kHz, 16 bit
Decoded 2 ch
(2 chDownmix)*
OK
AUTO
Auto (Max 6.1 ch)*
OK
LPCM
48 kHz, 16 bit, Decoded
2 ch (2 chDownmix)*
AUTO
Auto (Max 6.1 ch)*
OK
LPCM
44.1 kHz, 16 bit,
Decoded 2 ch*
OK
Auto*
OK
LPCM
a
.u
OK
48 kHz, 16 bit, Decoded
2 ch (2 chDownmix)*
OK
AUTO
Auto (Max 5.1 ch)*
OK
LPCM
44.1 kHz, 16 bit,
Decoded 2 ch*
OK
AUTO
Auto*
OK
LPCM
48 kHz, 16 bit, Decoded
2 ch (2 chDownmix)*
OK
AUTO
Auto (Max 5.1 ch)*
OK
48/96 kHz
MPEG1 Layer
II
(VCD, DVD-V,
DVD-A, DVDVR)
MPEG2 Layer
II
(DVD-V, DVDA, DVD-VR)
16/20/24 bit
44.1 kHz
16 bit
48 kHz
16 bit
m
o
c
.
AUTO
44.1 kHz
48 kHz
MPEG 1/2/
2.5 Layer
III
(MP3, WMA)
16/20/24 bit
0
13
16 bit
16 bit
32 kHz
16 bit
AUTO or LPCM
32 kHz, 16 bit, Decoded
2 ch
OK
44.1 kHz
16 bit
AUTO or LPCM
44.1 kHz, 16 bit,
Decoded 2 ch
OK
48 kHz
16 bit
AUTO or LPCM
48 kHz, 16 bit, Decoded
2 ch
OK
* Not output when playing back a DVD-Audio.
Autogood products internet store http://130.com.ua
31-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 32 Wednesday, January 24, 2007 2:26 PM
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: SURROUND / STEREO
SURROUND: Surround compatible Downmix.
STEREO:
Stereo Downmix.
Setting the TV Screen Setting
Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
If the rear monitor is not connected, the screen setting is 16:9.
Setting of the Bonus Code
Setting item: TV SCREEN
Setting contents: 4:3 LB / 4:3 PS / 16:9
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16:9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorised.
Refer to the information on the jacket, etc., of the disc, for the
code number.
Setting item: BONUS CODE
Setting contents: CODE
1
Touch [CODE].
The 10 key input screen is displayed.
2
3
a
.u
Input the 4 digit code number given on the jacket of
the disc, etc.
m
o
c
.
0
13
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16:9 size
movie).
Touch [ENT] to memorise the number.
• If the code number of the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display. If a new code number is input, this code number will
be replaced.
Setting of the DVD-Audio Playback Mode
To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player ) or VOFF (Video OFF) to playback the DVD
Audio.
Setting item: DVD-A SETUP
Setting contents: VIDEO / VCAP / VOFF
VIDEO:
VCAP:
VOFF:
32-EN
Only DVD Video is played back if the disc contains
DVD Video and Audio.
DVD Audio is played back with Video.
DVD Audio is played back without Video.
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 33 Wednesday, January 24, 2007 2:26 PM
Playing MP3/WMA Data (File Play Mode)
When using discs containing both audio data and MP3/WMA data.
Setting item: FILE PLAY MODE
Setting contents: CD / CMPM
Plays only the audio data on discs containing both
audio data and MP3/WMA data.
CMPM: Plays only the MP3/WMA files on discs containing both
audio data and MP3/WMA data.
CD:
• Insert the disc when playback is stopped and remove the disc from
the unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
Setting the Video CD Play Mode
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
Setting item: RDS CLOCK DISP
Setting contents: OFF / ON
ON:
Adjust the clock automatically based on the time data. In
this case, the clock cannot be adjusted manually.
To adjust it manually, select OFF.
Adjusting Source Signal Levels
If the difference in volume level between the CD and FM radio is too
great, adjust the FM signal level as follows.
Setting item: FM LEVEL
Setting contents: LOW / HIGH
When playing a Playback Control (PBC) enabled Video CD, you
can choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: ON / OFF
ON:
OFF:
RDS Time Display
PI SEEK Setting
Setting item: PI SEEK
Setting contents: OFF / AUTO
The PBC menu is displayed.
The PBC menu is not displayed.
a
.u
Receiving RDS Regional (Local) Stations
RADIO Setup
When OFF is selected, the unit automatically keeps receiving the related
local RDS station.
m
o
c
.
Setting item: RDS REGIONAL
Setting contents: OFF / ON
Radio Setup Operation
0
13
The Parking Brake must be engaged to access the RADIO
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of Radio Setup. Refer to each section for details.
1
2
Touch [SETUP] on the main source screen.
Setting item: PTY LANGUAGE
Setting contents: GB / NL / F / D / I / E
Setting PTY31 (Emergency Broadcast)
Reception
PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Touch [SOURCE].
Setting item: PTY31
Setting contents: ON / OFF
Touch [
• The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to on.
• The unit will show “ALARM” in the display during PTY31 reception.
] of RADIO SETUP.
The RADIO setup screen appears.
4
You can select one of the patterns of the display languages.
The SETUP selection screen is displayed.
The SOURCE SETUP screen appears.
3
Switching the Display Language of PTY
(Programme Type)
Touch [OFF], [ON] or [ ], [ ] of the desired item to
change its setting.
Setting items:
RDS CLOCK DISP / FM LEVEL / PI SEEK / RDS REGIONAL / PTY
LANGUAGE / PTY31
5
Touch [RETURN] to return to the previous screen.
Autogood products internet store http://130.com.ua
33-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 34 Wednesday, January 24, 2007 2:26 PM
Setting Daylight Saving Time
GENERAL Setup
Setting item: DAYLIGHT SAVING TIME
Setting contents: OFF / ON
General Setup Operation
OFF: Return to the ordinary time.
ON: Place the Summer Time mode ON. The time advances by
one hour.
The Parking Brake must be engaged to access the
GENERAL mode screen. Attempting to access this screen
while driving will display the warning-CAN’T OPERATE
WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of GENERAL Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
Touch [GENERAL].
Touch [OFF], [ON] or [ ], [ ], etc., of the desired
item to change its setting.
Setting items:
CLOCK / CLOCK ADJUST / DAYLIGHT SAVING TIME /
DEMONSTRATION / BEEP / AUTO SCROLL / LANGUAGE
SELECT / LED DIMMER LEVEL
4
Setting item: DEMONSTRATION
Setting contents: OFF / ON
OFF: Turns off the demonstration mode.
ON: Turns on the demonstration mode to show the basic
operations.
Sound (Beep) Guide Function
The GENERAL SETUP screen appears.
3
This unit is equipped with a demonstration function capable of showing
basic operations of respective sources on the monitor display.
• The demonstration operation is automatically repeated until the
function is turned off.
The SETUP selection screen is displayed.
2
Demonstration Function
Setting item: BEEP
Setting contents: OFF / ON
a
.u
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is
pressed.
ON: Activate the Sound Guide mode.
m
o
c
.
Touch [RETURN] to return to the previous screen.
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
0
13
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Displaying the Time
The clock indication on the monitor display is turned on or off
respectively.
Setting item: CLOCK
Setting contents: OFF / ON
Setting the Scroll
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: AUTO SCROLL
Setting contents: OFF / ON
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed.
ON: Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
• The display scrolls on the unit when the screen is filled up.
• Song, artist and album name, etc. scrolls when an iPod is connected.
Switching to the Russian Font
Two types of font can be selected.
Setting the Time
Setting item: CLOCK ADJUST
Further setting items : HOUR / MINUTE / TIME ADJUST
Setting contents: 0-23 / 0-59 / RESET
HOUR:
Adjust the hour.
MINUTE: Adjust the minute.
RESET: If the clock shows less than 30 minutes past, the
minute will be “: 0”; more than 30, the hour
advances.
Setting item: LANGUAGE SELECT
Setting contents: MODE1 / MODE2
MODE1: Normal Font Display (ISO8859-1).
MODE2: Russian Font Display (WINDOWS-1251)
You cannot use this font for display in RDS, Tuner
mode.
• The clock-adjusting mode is cancelled when the power is turned off,
when [RETURN] or [CONTROL] is touched.
• Clock adjustment can be made when “RDS Time Display” (page 33)
is set to OFF.
34-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 35 Wednesday, January 24, 2007 2:26 PM
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED DIMMER LEVEL
Setting level: -2 to +2
• The adjustment is available when ON is set in “Setting the Brightness
of the Backlighting” (page 38).
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output. The icon that is set in “Setting
the Interrupt Icon Display” is displayed.
System Setup Operation
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
The Parking Brake must be engaged to access the SYSTEM
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.
Touch [SETUP] on the main source screen.
Touch [SYSTEM].
The SYSTEM SETUP screen appears.
3
0
13
Touch [ ], [ ] or [OFF], [ON], etc., of the desired
item to change its setting.
Setting items:
IN INT. MUTE / IN INT. ICON / REMOTE SENSOR*4 /
CAMERA IN / NAV. IN / NAV. MIX*5 / AUX IN / AUX IN LEVEL*1 /
AUX IN SIGNAL*1 / AUX OUT / BLUETOOTH IN /
USB ADAPTER / VISUAL KEY*2 / OPTICAL OUT /
SUBWOOFER*3
*1 Not displayed when OFF is set in “Setting the AUX Mode”
(page 36).
*2 Not displayed when OFF is set in “Setting the Navigation
Mode” (page 36).
*3 Not displayed when an external audio processor is connected.
4
* When ON is set in “Setting the Picture Output” (page 36), the
item is displayed.
*5 When ON is set in “Setting the Navigation Mode” (page 36),
the item is displayed.
4
Setting the Interrupt Icon Display
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
a
.u
Setting item: IN INT. ICON
Setting contents: INT / TEL
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
m
o
c
.
The SETUP selection screen is displayed.
2
If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the
IVA-W205R/IVA-W202R, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to the
voice guidance of your navigation system when it occurs even while
you are playing a CD or DVD. The CD/DVD player will be
automatically muted during voice guidance. For further details, please
refer to the manual for NVE-K200.
Setting item: IN INT. MUTE
Setting contents: OFF / ON
SYSTEM Setup
1
Setting the External Device Interrupt Mode
Touch [RETURN] to return to the previous screen.
Switching the function of the remote
sensor
For optional remote control operation, the remote sensor of the external
device (monitor, etc.) can be switched, as you prefer.
Setting items: REMOTE SENSOR
Setting contents: FRONT / REAR
FRONT:
REAR:
The remote sensor of this unit is effective.
The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
• If a touch panel rear monitor (connected to the Alpine rear monitor
output via the Monitor control lead) is touched, the command is
executed regardless of the remote control sensor switch setting. Note,
however, that the remote control sensor that has been set takes
priority if it has been 5 seconds since last touching the panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to REAR, some soft button operations
( [ ] STOP, etc.) cannot be performed.
In this case, set the remote control sensor to FRONT.
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of System Mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Autogood products internet store http://130.com.ua
35-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 36 Wednesday, January 24, 2007 2:26 PM
Setting the Rear Camera Input
Setting the AUX Mode
With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / NTSC/PAL
OFF:
NTSC/PAL:
The CAMERA source is not displayed on the
VISUAL selection screen.
Even if the shift lever is not set to reverse (R), the
rear pictures are output by selecting the CAMERA
source.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL “Setting the VISUAL Soft Button”
(page 37).
Setting the Navigation Mode
Setting item: NAV. IN
Setting contents: OFF / ON
OFF: Navigation source is not displayed. The settings related
to the navigation cannot be changed from this unit.
ON: Navigation source is displayed.
Setting the Navigation Interruption
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
a
.u
m
o
c
.
0
13
See “Adjusting NAV. Level” under “Adjusting the Audio” on page
26 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting its volume while the prompts are announced. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume. If a navigation announcement
cuts in while adjusting the audio level, it always resets to the current
level regardless of the audio level setting.
• This setting is effective when NAV. IN of SYSTEM list screen is ON.
36-EN
• OFF is not displayed when the optional DVD player or DVD changer
is connected.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
Switching the Visual Input Signal System
With an Alpine navigation system connected to the IVA-W205R/
IVA-W202R, the voice guidance of the navigation system will be mixed
with the radio or CD play.
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
OFF: AUX source is not displayed.
ON: AUX source is displayed.
Adjusting the External Input Audio Level
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. MIX
Setting content: OFF / ON
Setting item: AUX IN
Setting contents: OFF / ON / VCR / GAME / TV / DVB-T / EXT. DVD
/ BLACKBIRD
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN SIGNAL
Setting contents: NTSC / PAL
• The video input type can be changed.
Setting the Picture Output
Outputs the picture of the source selected on the
IVA-W205R/IVA-W202R connected to the rear monitor.
Setting item: AUX OUT
Setting contents: OFF / ON
OFF: The “REAR” item is not displayed on the Source Selection
screen.
ON: The “REAR” item is displayed on the Source Selection
screen.
Touch [REAR] to change to the REAR select screen, then
touch the desired source. The selected source picture is
output on the rear monitor.
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 37 Wednesday, January 24, 2007 2:26 PM
Setting the Bluetooth Connection
(BLUETOOTH IN)
DISPLAY Setup
Setting item: BLUETOOTH IN
Setting contents: NAV. (IVA-W205R only) / ADAPTER / OFF
Select when the optional portable navigation is
(IVA-W205R only) connected.
The TEL screen of the portable navigation is
displayed.
ADAPTER: Select when the optional Bluetooth box is
connected.
The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the display
changes to the TEL screen.
OFF:
Select to ignore any external interrupts.
Display Setup Operation
NAV.:
• The setting cannot be made when “Setting the External Device
Interrupt Mode” (page 35) is set to ON.
• For details on Bluetooth operation, refer to the Owner’s Manual of
the Bluetooth Box.
Setting the USB Adapter (KCA-620M) to
ON/OFF
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting contents: OFF / ON
OFF: Does not display the USB source name on the SOURCE
select screen.
ON: Displays the USB source name on the SOURCE select
screen.
Setting item: VISUAL KEY
Setting contents: VISUAL / NAV.
The following steps 1 to 4 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [DISPLAY].
The DISPLAY SETUP screen appears.
3
Touch [ ], [ ] or [
change its setting.
], etc., of the desired item to
a
.u
Setting items:
TILT* / VISUAL EQ / DIMMER / DIMMER LOW LEVEL /
BACKGROUND / AUTO BACKGROUND / DATA DOWNLOAD /
BASE COLOR / PULSETOUCH / SCREEN ALIGNMENT
m
o
c
.
• If ON is set even when a CD changer is connected, the source name
on the SOURCE select screen will change from CD CHG to USB.
0
13
Setting the VISUAL Soft Button
The Parking Brake must be engaged to access the DISPLAY
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
VISUAL: Recalls the VISUAL Select screen by touching
[VISUAL].
NAV.:
Switches directly to the navigation screen by touching
[VISUAL].
* IVA-W202R only:
For operation, refer to “Adjusting the Monitor Viewing Angle” on
page 10.
4
Touch [RETURN] to return to the previous screen.
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Setting the Digital Output
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
Subwoofer On and Off
Setting item: SUBWOOFER
Setting contents: ON / OFF
ON: Subwoofer output is on.
OFF: Subwoofer output is off.
Autogood products internet store http://130.com.ua
37-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 38 Wednesday, January 24, 2007 2:26 PM
Setting the Brightness of the Backlighting
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: DIMMER
Setting contents: OFF / ON / AUTO
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
ON:
Keep the background illumination of the monitor dark.
AUTO: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
OFF:
• When ON or AUTO is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 35).
Adjusting the Minimum Level of Backlight
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: DIMMER LOW LEVEL
Setting content: -15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Setting item: BACKGROUND
Setting contents: MODE1 / MODE2
The background picture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: AUTO BACKGROUND
Setting contents: OFF / ON
OFF: Turn off the Auto Background mode.
ON: Turn on the Auto Background mode.
The background picture will change when the ignition key
is turned off once and turned back on again as follows:
MODE1
MODE2
• Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 40) are recalled.
Switching the Font Back Display Colour
You can choose from 5 different display colours for the font back
(source title, shortcut display, etc.).
Setting item: BASE COLOR
Setting content: MODE 1 to MODE 5
Turning the Touch Panel Vibration ON or
OFF
a
.u
You can turn the touch panel’s vibration ON or OFF during operation.
m
o
c
.
Switching Background Textures
0
13
You have a choice of background textures you can set.
Setting Automatic Wallpapers
• This operation can be carried out after removing the disc from the
unit or when playback of the disc has stopped.
• Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 40) are recalled.
• When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
• When an error message is displayed (ERROR, HI-TEMP, etc.),
background textures selected by this setting cannot be displayed on
the unit.
Setting item: PULSETOUCH
Setting contents: OFF / ON
OFF:
ON:
Turns off vibration during operation.
Turns on vibration during operation.
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting contents:
/ RESET
1 Touch [
] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the
mark, touch
[RESET] to restore the adjustment screen to the initial setting.
• If you touch [RETURN] on the adjustment screen, no adjustment is
done and the DISPLAY setup screen is restored.
38-EN
Autogood products internet store http://130.com.ua
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 39 Wednesday, January 24, 2007 2:26 PM
Selecting the VISUAL EQ Mode (Maker’s
setting)
VISUAL EQ™
You can select a mode suitable for the subject image.
Visual EQ Setting Operation
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
The following steps 1 to 4 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details.
1
After steps 1 and 2 in “Display Setup Operation”
(page 37) have been performed, touch [
] of
VISUAL EQ.
VISUAL EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ*
SHARP*
BRIGHT
COLOR*
USER MEMORY*
TINT*
CONTRAST
* The setting is available in the visual source mode. (except navigation
screen)
3
4
Change the setting on the selected item by touching
its [ ] or [ ].
Touch [RETURN] to return to the previous screen.
OFF (FLAT): Initial Setting.
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 40).
P-2:
Recalls the VISUAL EQ mode being stored on
preset No.P-2 from “Storing VISUAL EQ”
(page 40).
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
a
.u
m
o
c
.
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
0
13
Adjusting Brightness
Setting item: BRIGHT
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car’s interior lighting as
long as AUTO is set in “Setting the Brightness of the Backlighting”
(page 38).
Adjusting Colour of Picture
Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the colour between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Colour adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
• Colour adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Autogood products internet store http://130.com.ua
39-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 40 Wednesday, January 24, 2007 2:26 PM
Adjusting Tint of Picture
Data Download
Setting item: TINT
Setting content: G15 ~ R15
Adjust the colour from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each colour.
Downloading the BACKGROUND data
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When Setting PAL, you cannot adjust the TINT.
You can download data (from Alpine’s website) to a CD-R/CD-RW
(data is written in the root folder), and store the data to the
IVA-W205R/IVA-W202R.
To start BACKGROUND download, access the URL below and follow
the on-screen instructions.
http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au
Adjusting Image Contrast
Setting item: CONTRAST
Setting content: -15 to +15
1
Contrast adjustment range is -15 to +15. “LOW” and “HIGH”
appear as the minimum and maximum values specified.
2
3
Setting item: SHARP
Setting content: -15 to +15
Picture quality adjustment range is -15 to +15. “SOFT” and
“HARD” appear as the minimum and maximum values specified.
• Picture quality adjustment can be made only in the navigation, DVD,
Video CD, AUX modes.
• Picture quality adjustment cannot be made if a Navigation system
with the RGB feature is connected.
Touch [
] of DATA DOWNLOAD.
Data search of the disc starts. After completing the data
search, the file selection screen of Data Download is
displayed.
4
5
a
.u
Touch [ ] or [ ] to select the desired file name.
m
o
c
.
0
13
You can store the settings made for “Adjusting Image Brightness, Tint,
Depth, Picture Quality and Contrast.”
Setting item: USER MEMORY
Setting contents: P-1 / P-2
Touch [ ] or [ ] of DATA DOWNLOAD, then select
USER1 or USER2.
The selected wallpaper can be changed.
Adjusting Picture Quality
Storing VISUAL EQ
Insert the CD-R/CD-RW disc containing the data you
need.
1 After completing “Adjusting Image Brightness, Tint,
Depth, Picture Quality, and Contrast” (pages 39-40),
touch [ ] or [ ] of USER MEMORY and then select
preset No. “P-1” or “P-2” to which the settings are to be
stored.
2 After selecting a preset No., touch [MEMORY].
The adjusted VISUAL EQ mode is stored by the above
operations.
Touch [MEMORY].
Data download starts.
When data downloading has completed correctly, the
screen returns to the DATA DOWNLOAD screen.
6
Touching [RETURN] returns to the previous
screen.
Touch and hold [RETURN] for at least 2 seconds returns to
the earlier main source screen.
• For details about procedures of download, see ALPINE’s Web site.
• If data is newly downloaded, the data overwrites the previous data.
• The downloaded data will not be deleted even when the battery
power cable is removed.
• You can recall a wallpaper in “Switching Background Textures”
(page 38), or “Setting Automatic Wallpapers” (page 38).
• When download has completed, remove the disc.
• You can recall the VISUAL EQ mode stored here from P-1 or P-2 of
“Selecting the VISUAL EQ Mode (Maker’s setting)” (page 39).
40-EN
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 41 Wednesday, January 24, 2007 2:26 PM
Connection of an
External Device
External Audio Processor
(Optional)
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
When an external audio processor is connected to this unit, you can
operate it from this unit. Some audio processors may not be operated. In
this case, operate them in the connected product. Explanations below
are the case when PXA-H700 or PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the
MRA-D550 is connected. Additionally, if the MRA-F350 is
connected, the following setting “Setting the MX mode” is not
available. Also, the setting content differs between the PXA-H700
and PXA-H701.
• This unit cannot be connected to the PXA-H510 and PXA-H900.
1
Speaker Setup (page 46)
2
Adjusting the speaker levels (page 47)
3
Mixing bass sound to the rear channel
(page 47)
(Turning the speakers to be used on and off and
setting their response)
(Adjusting the signal output level to the various
speakers)
a
.u
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
m
o
c
.
The Parking Brake must be engaged to access the Audio
Processor mode screen. Attempting to access this screen
while driving will display the warning-CAN’T OPERATE
WHILE DRIVING.
0
13
4
Adjusting the acoustic image (page 47)
5
Achieving powerful high volume sound
(page 47)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
6
7
Adjusting the DVD Level (page 48)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes)
Storing Settings in the Memory (page 48)
(Storing all the settings and adjustments made on the
IVA-W205R/IVA-W202R (not only the above settings/
adjusts) in the memory)
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
Autogood products internet store http://130.com.ua
41-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 42 Wednesday, January 24, 2007 2:26 PM
7
Setting the Speakers
1
2
Check that Defeat mode is off (page 26).
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
MX CMPM (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
Touch [AUDIO].
The AUDIO SETUP screen appears.
4
Touch [
] of A.PROC.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear and
produces well balanced sound in all the bands.
The A.PROCESSOR list screen appears.
5
Touch [
] of SPEAKER SELECT.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disc contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
The SPEAKER SELECT screen appears.
6
Set the connected speaker by touching the
respective [ ], [ ] or [ON], [OFF] button.
FRONT1:
FRONT2:
REAR:
CENTER:
SUBW.:
7
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding MW, LW
radio) level can be set.
OFF/FULL (Full Range)/TW (Tweeter)
OFF/ON
OFF/ON
OFF/ON
OFF/MONO/STEREO
MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
8
Touch [RETURN] to return to the previous screen.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 46).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Touch [RETURN] to return to the previous screen.
a
.u
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for MW, LW radio.
• MX CMPM is applied for MP3/WMA and iPod.
• The MX setting can be performed only when a source is currently
selected.
m
o
c
.
0
13
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
2
Check that Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
Touch [AUDIO].
The AUDIO SETUP screen will appear.
4
Touch [
] of A.PROC.
The A.PROCESSOR list screen appears.
5
Select ON or OFF of MX by touching [ON] or [OFF]
of MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
6
Touch [
] after setting to ON.
The MEDIA XPANDER setup screen appears.
42-EN
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 43 Wednesday, January 24, 2007 2:26 PM
X-OVER Adjustment
1
2
Performing Time Correction Manually
(TCR)
Check that Defeat mode is off.
Because of the particular conditions inside the vehicle, there can be
major differences in the distances between the various speakers and the
listening position. It is possible to calculate the optimum correction
values and eliminate the time error at the listening position yourself
using this function.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
Touch [AUDIO].
The AUDIO SETUP screen will appear.
4
Touch [
1
2
] of A.PROC.
The A.PROCESSOR list screen appears.
5
Touch [ ] or [ ] of X-OVER to select L/R or L+R.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
6
Touch [
8
Calculate the difference in distance between the
farthest speaker and the other speakers.
4
(distance of farthest speaker)
– (distance of other speakers)
The screen changes to the X-OVER screen to be adjusted.
Divide the distances calculated for the different
speakers by the speed of sound (343 m/s
temperature 20°C).
Adjust the crossover to your preference.
This value is the time correction value for the various
speakers.
Touch [
] of the speaker to be adjusted.
Selecting the Cut-Off Frequency
The adjustable bandwidth differs depending on the speaker
(channel).
Adjusting the Level
0
13
Touch [ ] or [ ] of LEVEL, then adjust the HPF or LPF level.
Adjusting the Slope
a
.u
Concrete examples
Calculating the time correction value for the front left speaker on
the diagram below.
m
o
c
.
Touch [ ] or [ ] of FREQ. then select the cut-off frequency
(crossover point).
Touch [ ] or [ ] of SLOPE, then adjust the HPF or LPF
slope.
9
Sit in the listening position (the driver’s seat, for
example) and measure the distance (in meters)
between your head and the various speakers.
L=
] of X-OVER.
A speaker list on the X-OVER screen is displayed.
7
3
Check that Defeat mode is off.
Conditions:
Distance between farthest speaker and listening position:
2.25 m (88-3/4")
Distance between front left speaker and listening position:
0.5 m (20")
Calculation:
L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4")
Compensation time = 1.75 ÷ 343 x 1000 = 5.1 (ms)
In other words, setting the time correction value for the front left
speaker to 5.1 (ms) sets a virtual distance matching the
distance to the farthest speaker.
Touch [RETURN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the X-OVER for that
speaker cannot be set. Refer to “Setting the Speakers” (page 42).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The HPF cannot be set SLOPE to OFF if Tweeter (TW) is selected
for FRONT1. Or, only the subwoofer is adjustable if STEREO is
selected for the subwoofer.
Autogood products internet store http://130.com.ua
43-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 44 Wednesday, January 24, 2007 2:26 PM
Phase Switching
1
2
5.1ms
Check that Defeat mode is off (page 26).
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
0.5m
2.25m
Touch [AUDIO].
The AUDIO SETUP screen appears.
4
Touch [
] of A.PROC.
The A.PROCESSOR list screen is displayed.
5
Touch [
] of PHASE.
The PHASE adjustment screen appears.
The sound is uneven because
the distance between the
listening position and the
different speakers is
different.
The difference in the distance
between the front left and
rear right speakers is 1.75
meters (68-3/4").
5
Time correction eliminates
the difference between the
time required for the sound
from the different speakers to
reach the listening position.
Setting the time correction of
the front left speaker to 5.1
ms makes it possible to
coordinate the distance from
the listening position to the
speaker.
Touch [SETUP] on the main source screen.
Touch [AUDIO].
The AUDIO SETUP screen appears.
7
Touch [
] of A.PROC.
0
13
The A.PROCESSOR list screen is displayed.
8
Touch [ ] or [ ] of T.CORR.
Select L/R or L+R.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
9
Touch [
7
Touch [RETURN] to return to the previous screen.
Graphic Equalizer Adjustments
a
.u
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and centre
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
2
3
4
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 42).
• The adjustment value for FRONT2 (speakers) which is adjusted in
time correction, is also applied to the front speakers in “Setting Bass
Focus” (page 46).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
Touch [AUDIO].
Touch [
] of A.PROC.
The A.PROCESSOR list screen appears.
5
Select L/R or L+R by touching [ ] or [ ] of G-EQ.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
10 Adjust the time correction value (0.00 ~ 20.00ms) of
11 Touch [RETURN] to return to the previous screen.
Touch [SETUP] on the main source screen.
The AUDIO SETUP screen will appear.
] of T.CORR.
a desired speaker by touching the respective [ ] or
[ ] button (1 step = 0.05ms).
Check that Defeat mode is off.
The SETUP selection screen appears.
The T.CORR adjustment screen appears.
44-EN
Switch the phase (0° or 180°) by touching [ ] or [ ]
of the desired speaker.
m
o
c
.
The SETUP selection screen appears.
6
6
When parametric EQ is adjusted, this setting will be turned
off.
6
Touch [
] of G-EQ.
The G-EQ list screen appears.
7
Touch [
] of the desired speaker (channel).
The G-EQ adjustment screen appears.
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 45 Wednesday, January 24, 2007 2:26 PM
8
8
Adjust the G-EQ to your preference.
Adjust the P-EQ to your preference.
Adjusting the Level
Selecting the Band
Touch [ ] or [ ] of the desired frequency to adjust the level.
Touch [ ] or [ ] of BAND to select the desired band.
9
Adjusting the Frequency
Touch [RETURN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 42).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
Touch [ ] or [ ] of FREQ. to adjust the frequency of the
selected band.
Adjusting the Level
Touch [ ] or [ ] of LEVEL to adjust the level of the selected
band.
Setting the Bandwidth
Touch [ ] or [ ] of Q. to select the bandwith.
9
Parametric Equalizer Adjustments
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s centre frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
1
2
Check that Defeat mode is off.
Touch [AUDIO].
0
13
The AUDIO SETUP screen will appear.
4
Touch [
] of A.PROC.
The A.PROCESSOR list screen appears.
5
a
.u
m
o
c
.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
Touch [RETURN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 42).
• It is not possible to adjust the frequencies of adjacent bands within 7
steps.
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
Select L/R or L+R by touching [ ] or [ ] of P-EQ.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
When graphic EQ is adjusted, this setting will be turned off.
6
Touch [
] of P-EQ.
The P-EQ list screen appears.
7
Touch [
] of the desired speaker (channel).
The P-EQ adjustment screen appears.
Autogood products internet store http://130.com.ua
45-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 46 Wednesday, January 24, 2007 2:26 PM
Setting Bass Sound Control
Speaker Setup
1
2
The PXA-H700 or PXA-H701 can be set according to the playable
frequency range of your speakers.
Check the playable frequency range of the speakers (not including the
subwoofer) before performing this operation to verify whether the
speakers can play low frequencies (of about 80 Hz or less).
Check that Defeat mode is off (page 26).
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
Touch [AUDIO].
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if Decode mode is switched.
The AUDIO SETUP screen appears.
4
Touch [
] of A.PROC.
1
2
The A.PROCESSOR list is displayed.
5
Touch [
] of BASS SOUND CONT.
The BASS SOUND CONT screen appears.
3
4
Touch [ ] or [ ] of BASS COMP. to select the
desired mode.
Bass sound is emphasized more as the mode is
sequentially switched as MODE 1
2
3, offering you
vivid low frequencies.
Select OFF when the setting is not necessary.
Touch [RETURN] to return to the previous screen.
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rear/left-right speakers.
Namely, it enables a time correction based on your preference. With an
initial delay of 0.1 ms for each of the 0 to 200 steps, audible time
correction can be achieved.
0
13
Set the delay number in the front and rear, and on
the right and left of the desired speaker by touching
the respective [ ] or [ ] button.
• Any setting in Bass Focus is applied in time correction, too
(pages 43-44).
• Touch [RETURN] to return to the previous screen.
Touch [
] of A.PROC.
The A.PROCESSOR list screen appears.
5
Touch [
] of SPEAKER SETUP.
a
.u
The adjusting screen of SPEAKER SETUP appears.
6
Select the speaker characteristic by touching [ ],
[ ] of the desired speaker setting.
OFF*1:
SMALL:
When no speaker is connected.
When a speaker that cannot play low frequencies
(80 Hz or less) is connected.
LARGE*2: When a speaker that can play low frequencies
(80 Hz or less) is connected.
m
o
c
.
Setting Bass Focus
46-EN
Touch [AUDIO].
The AUDIO SETUP screen will appear.
You can adjust the sound of low frequencies as desired.
6
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
Setting Bass Compressor
6
Check that Defeat mode is off.
*1 It is not possible to set the front speakers to “OFF”.
*2 If the front speakers are set to “SMALL”, the rear and
centre speakers cannot be set to “LARGE”.
• The subwoofer can be set only to ON/OFF.
• If the centre speaker is turned “OFF”, the centre channel’s audio
signals are added to the audio signals output from the front speakers.
• If you set the speaker response to “OFF”, also set the speaker setting
to “OFF” (page 42).
• Perform the setup for all the speakers (“Front”, “Centre”, “Rear”
and “Subwoofer”). If not, the sound may not be balanced.
• When centre is set to “OFF”, the setting is ineffective even if centre
is set with this function.
• Through changing the settings on each speaker, a change in the
output of the other speakers may occur due to the setting
requirements.
• When using the PRO LOGIC II, if the rear speaker is set to
“LARGE”, then there will be no output from the subwoofer.
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 47 Wednesday, January 24, 2007 2:26 PM
Achieving powerful high volume sound
(LISTENING MODE)
Setting of Dolby Digital
1
2
Check that Defeat mode is off.
With Dolby Digital, the dynamic range is compressed so that powerful
sound can be achieved at regular volume levels. This compression can
be cancelled to achieve an energetic sound with even greater power, like
the sound in a movie theater.
This function works only in the Dolby Digital mode.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
4
Touch [AUDIO].
The AUDIO SETUP screen will appear.
Touch [
Touch [
STD: For powerful sound at regular volume levels
MAX.: For powerful sound at high volumes
] of A.PROC.
] or [
] of LISTENING MODE to select STD or MAX.
The A.PROCESSOR list screen appears.
5
Touch [
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
] of MULTI CH SETUP.
The MULTI CH SETUP display appears.
Set the items below as you desire.
Adjusting the speaker levels
(OUTPUT LEVEL)
Adjusting the acoustic image
(BI-PHANTOM)
In most installations, the centre speaker must be placed directly between
the front passenger and driver. Using this function, the centre channel
information is distributed to the left and right speakers. This creates an
acoustic image simulating a centre speaker directly in front of each
listener. Adjusting the centre width in PL II MUSIC (see “Using the Pro
Logic II Mode,” page 48), makes this function ineffective.
The test tones help to make the volume adjustments of the different
speakers. When levels are equal, a strong sense of presence can be heard
from the different speakers at the listening position.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the decode mode is switched.
a
.u
1 Touch [ON] of OUTPUT LEVEL.
Test tone output is repeated for each of the different
speaker channels. They will be repeated in the order
shown below.
If no operation is performed for 2 seconds, the channel
switches to the next channel.
m
o
c
.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Touch [ ] or [ ] of BI-PHANTOM to adjust the level.
The level can be adjusted within the range of -5 to +5.
The higher the level, the more the position of the centre speaker
is shifted to the sides.
The BI-PHANTOM function is turned off by touching [OFF].
0
13
• This adjustment is effective when the setting of the centre speaker to
SMALL or LARGE in the speaker setup settings.
• This adjustment is ineffective when the speaker is set CENTER to
OFF in “Setting the Speakers” (page 42).
Mixing bass sound to the rear channel
(REAR MIX)
Left
Centre
Left Surround
Right
Left
Right Surround
2 While the test tone is being produced from the speakers,
touch [ ] or [ ] of OUTPUT LEVEL balance the output
from all the speakers.
• The adjustment range for the different speakers is
–10 dB - +10 dB.
• Adjust based on the front speakers.
3 Touch [ON] again to turn off.
• If a speaker is set to off mode, that speaker’s level adjustment cannot
be made. Refer to “Speaker Setup” (page 46).
This function mixes the front channel audio signals to the audio signals
output from the rear speakers, improving the sound in the vehicle’s rear
seat.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Touch [ ] or [ ] of REAR MIX to adjust the level.
The level can adjusted in five steps: -6, -3, 0, +3 and +6. The
higher the level, the more bass is output from the rear speakers.
(The effect differs according to the software (DVD, etc.).)
The REAR MIX function is turned off by touching [OFF].
• This adjustment is ineffective when the rear speaker setup setting is
set to “OFF”.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
Autogood products internet store http://130.com.ua
47-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 48 Wednesday, January 24, 2007 2:26 PM
Adjusting the DVD Level
Using the Pro Logic II Mode
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound.
For two-channel Dolby Digital and DTS signals, there is also a
“REAR FILL” function for outputting the signals of the front channel to
the rear channel.
1
2
1
2
Check that Defeat mode is off (page 26).
Touch [SETUP] on the main source screen.
3
Touch [AUDIO].
Touch [
4
] of A.PROC.
Touch [
5
] of DVD LEVEL.
6
Adjust the level by touching [ ] or [ ] of the
desired adjusting mode.
The level can be adjusted in the range of –5 dB to +5 dB.
Storing Settings in the Memory
3
Check that Defeat mode is off.
0
13
Touch [MEMORY] on the A.PROCESSOR list
display.
Within 5 seconds, touch any one of the preset
buttons [P.SET 1] through [P.SET 6] on the
A.PROCESSOR list screen.
Touch [
] of DOLBY PLII/REAR FILL.
Touch [ ] or [ ] of DOLBY PLII/REAR to select the
desired mode.
a
.u
PL II MOVIE: Suits the stereo TV shows and all programmes
encoded in Dolby Surround. It improves the
sound field directivity to near that of discrete
5.1-channel sound.
PL II MUSIC: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
OFF:
Turns DOLBY PL II function to OFF.
m
o
c
.
Adjustment or setting contents can be stored.
Contents that can be stored vary depends on the audio processor used.
1
2
] of A.PROC.
The DOLBY PLII/REAR adjusting screen appears.
The DVD LEVEL list screen appears.
6
Touch [
The A.PROCESSOR list screen appears.
The A.PROCESSOR list screen appears.
5
Touch [AUDIO].
The AUDIO SETUP screen will appear.
The AUDIO SETUP screen will appear.
4
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
The SETUP selection screen appears.
3
Check that Defeat mode is off.
The setting contents are stored.
• The stored contents will not be deleted even when the battery power
cord is detached.
If PL II MUSIC is selected, the centre width can be adjusted with
following operations.
This function offers the optimum vocal position by adjusting the
centre channel position between the centre speaker and the L/R
speaker. (The adjustments established in “Adjusting the
acoustic image (BI-PHANTOM)” (page 47) are ineffective while
this function is activated.)
Touch [ ] or [ ] of CENTER WIDTH CONT to adjust the
level.
The level can be adjusted between ±0 to +7. When the
level increases, the centre channel position moves from
the centre speaker position to both sides.
Touch [OFF] of CENTER WIDTH CONT to turn off the
centre width control.
Calling up the Preset Memory
1
2
Check that Defeat mode is off.
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] on the A.PROC list display to
select the preset memory.
• It takes a few moments to call up the preset memory.
48-EN
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 49 Wednesday, January 24, 2007 2:26 PM
• This adjustment is effective when the setting of the centre speaker is
SMALL or LARGE in the speaker setup settings.
• “REAR FILL” function:
Depending on the input signals, the sound may only be output from
the front speakers. In this case, the “REAR FILL” function can be
used to output signals from the rear speakers as well.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
• This adjustment is ineffective when the speaker is set CENTER to
OFF in “Setting the Speakers” (page 42).
• This function only works with two-channel signals. This operation is
ineffective when 5.1-channel DTS or Dolby Digital signals are input.
• If the setting of REAR FILL is made when REAR MIX is ON, sound is
unchanged in the rear fill setting because REAR MIX is given priority
during 2 channel decoder other than linear PCM.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• Touching [RETURN] will return to the previous screen.
Navigation System
(Optional)
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the
IVA-W205R/IVA-W202R, the Navigation screen can be displayed on
this unit.
1
The source screen appears on the display.
2
Linear PCM Setting
Check that Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
Touch [
] of A.PROC.
0
13
The A.PROCESSOR list screen appears.
5
Touch [ ] or [ ] of PCM MODE to select 2 CH or
3 CH.
2 CH: 2 ch output (L/R)
3 CH: 3 ch output (L/R/CENTER)
a
.u
• Use the “Setting the VISUAL Soft Button” function (page 37), to
select “Nav.”. The navigation mode becomes directly activated using
the VISUAL Soft Button.
• If the Navigation mode menu is not displayed on the main menu
screen, set NAV. IN to ON in “Setting the Navigation Mode”
(page 36).
• When the Navigation System is on, the audio and visual navigation
cuts in.
m
o
c
.
Touch [AUDIO].
The AUDIO SETUP screen will appear.
4
Touch [NAV.].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner’s Manual of the
Navigation.
The output when playing discs recorded in linear PCM can be set to 2 or
3 channels.
1
2
Touch [SOURCE] on the main source screen.
• This adjustment is ineffective when the speaker is set CENTER to
OFF in “Setting the Speakers” (page 42).
Portable Navigation System Operation
(Optional)
An optional Alpine Portable Navigation System is controllable from the
unit. For details on operation, refer to the Owner’s Manual of the
Portable Navigation.
An external navigation system and portable navigation cannot
be connected at the same time.
If the Built-in Dock is used for IVA-W205R
About dockable BLACKBIRD series or Portable Navigation devices
with this unit:
• Docking to the PMD-B100 is not possible.
• For information on docking a portable navigation to the unit, consult
your Alpine dealer.
1
Press
on the unit.
The unit changes to the EJECT/TILT screen.
2
Touch [OPEN].
The movable monitor will open.
Autogood products internet store http://130.com.ua
49-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 50 Wednesday, January 24, 2007 2:26 PM
3
Remove the slot panel, then insert the Portable
Navigation device in the unit (See the illustration
below).
Portable Navigation Slot
Optional Portable
Navigation
Operating Auxiliary Devices (Optional)
• The slot panel can be detached by placing a finger in the hole in the
centre of the panel and pulling it down.
• If the face plate is attached, first remove the face plate, then the slot
panel. After removing the slot panel, reattach the face plate.
4
After inserting, touch [CLOSE] on the EJECT/TILT
screen.
To operate your devices connected to the AUX terminals on the rear
panel of IVA-W205R/IVA-W202R, follow the procedure described
below.
WARNING
It is dangerous for the driver to watch the TV/Video while
driving the vehicle. The driver may be distracted from
looking ahead and an accident could occur.
Install the IVA-W205R/IVA-W202R correctly so that the
driver cannot watch TV/Video unless the vehicle is
stopped and the emergency brake is applied.
The movable monitor will close.
5
Auxiliary Device
(Optional)
Press SOURCE.
The SOURCE selection screen is displayed.
6
When the source name of [BLACKBIRD] on the
SOURCE selection screen is displayed, touch the
desired source name.
• For details on operation, refer to the Owner’s Manual of the Portable
Navigation device.
1 Press
on the unit.
The display changes to the EJECT/TILT screen.
2 Touch [OPEN] or [ ] of BLACKBIRD on the EJECT/TILT
screen.
The movable monitor will open.
3 Press [ ] behind the monitor.
The Portable Navigation device is removed.
0
13
Push
If an Optional Docking Station is used for
IVA-W205R
2
a
.u
m
o
c
.
Removing the Portable Navigation Device
1
If the IVA-W205R/IVA-W202R is not installed correctly,
the driver will be able to watch the TV/Video while driving
the vehicle and may be distracted from looking ahead
and cause an accident. The driver or other people could
be severely injured.
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
1
Touch [SOURCE] on the main source screen.
The source screen appears on the display.
2
Touch [AUX]*.
The external input screen is displayed.
3
Touch [NTSC/PAL] to change the video input.
* The name which is given as the source name in “Setting the AUX
Mode” on page 36 is displayed.
• If the AUX mode is not displayed on the main menu, set AUX IN to
ON by following “Setting the AUX Mode” (page 36).
• The setting of switching NTSC/PAL, which you have set in this
section, can be used in same way in “Switching the Visual Input
Signal System” on page 36.
• The display mode changes by touching [WIDE].
For operation, refer to “Switching Display Modes” on page 28.
• After connecting the KCA-410C, its AUX input can be used only in
INTERRUPT MODE. For details, refer to the KCA-410C Owner’s
Manual.
Select the BLACKBIRD in “Setting the AUX Mode”
(page 36).
Mount the Portable Navigation device to the optional
docking station.
The connection to the Portable Navigation device is
recognized in steps 1 and 2.
3
Press SOURCE.
The SOURCE selection screen is displayed.
4
Touch [BLACKBIRD].
For details on operation, refer to the Owner’s Manual of the
Portable Navigation device.
50-EN
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 51 Wednesday, January 24, 2007 2:26 PM
TUE-T200DVB
Operation
(Optional)
Changer
(Optional)
Controlling CD Changer (Optional)
Operating the TUE-T200DVB (Optional)
Operable when optional TUE-T200DVB is connected.
When DVB-T is selected in “Setting the AUX Mode” (page 36), the
source is displayed in SOURCE selection screen.
1
While your vehicle is parked, touch [SOURCE] on
the main source screen.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the IVA-W205R/IVA-W202R.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 52).
The source screen appears on the display.
2
Touch [DVB-T].
The DVB-T screen is displayed.
3
Perform the desired operation.
Channel Number Up/Down or Favorite Channel Number
Up/Down
1
Touch [ CH] or [CH ] to move the Channel number Up/
Down.
Touch [ FAV] or [FAV ] to move the Favorite Channel
number Up/Down.
1
0
13
Touch [MENU] to call up the main menu screen.
Calling up Menu Operation Mode
1
Touch [MENU CONT] to call up the menu operation
mode.
Switching the Source
1
Touch [BAND].
The source switches with each touch.
Calling up Electronic Programme Guide (EPG)
1
Touch [EPG] to call up the Electronic Programme
Guide.
Scanning Mode
1
1
2
a
.u
Touch [SOURCE] on the main source screen.
Touch [CD CHG.].
The display changes to the CD changer mode screen.
m
o
c
.
Touch [TUNE] to select changing the Channel or
the Favorite Channel.
Calling up Main Menu Screen
An optional 6-disc or 12-disc CD Changer may be connected to the
IVA-W205R/IVA-W202R if it is Ai-NET compatible. With a CD
Changer connected to the Ai-NET input of the
IVA-W205R/IVA-W202R, the CD Changer will be controllable from
the IVA-W205R/IVA-W202R.
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the
IVA-W205R/IVA-W202R.
Touch [P1/2].
When a 6 Disc CD Changer is connected;
1 Touch [P1/2]*.
The Function Guide display appears.
* When an MP3 compatible CD changer or DVD changer is
connected, touch repeatedly until the disc number is displayed.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [P1/3] twice to change the Function Guide display.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Touch [P1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that DISC 7
through DISC 12 represent disc numbers 7 to 12.
• After selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA section.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the
IVA-W205R/IVA-W202R as well as the CD changer.
The function guide appears.
2
Touch [A.MEMO] to start the auto scan procedure.
• For detail, refer to the Owner’s Manual of the TUE-T200DVB sold
separately.
Autogood products internet store http://130.com.ua
51-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 52 Wednesday, January 24, 2007 2:26 PM
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers.
1
2
USB Operation
(Optional)
In changer mode, touch [CHG SEL] to select the
next changer (connected CD changers or KCA-420i).
Controlling USB (Optional)
To operate the selected changer, see
“CD/MP3/WMA” section.
If the optional USB Adapter for the MP3 (KCA-620M) is connected, it
is controllable from the unit.
• To operate the selected changer, see “CD/MP3/WMA”
(pages 15-17).
1
2
Touch [SOURCE] on the main screen.
Touch [USB].
The display changes to the USB mode screen.
• After selecting the USB mode, you can operate in the same way as for
the changer, For details, see the “Changer” and “CD/MP3/WMA”
Section.
a
.u
m
o
c
.
0
13
52-EN
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 53 Wednesday, January 24, 2007 2:26 PM
iPod® (Optional)
Searching for a desired Song
An iPod® can be connected to the IVA-W205R/IVA-W202R by using
the FULL SPEED™ Connection Cable (sold separately). When the
IVA-W205R/IVA-W202R is connected by using the cable, the controls
on the iPod are not functional.
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the IVA-W205R/IVA-W202R can use these to
ease song searches.
Using the search mode’s individual hierarchy, you can narrow down
your search as shown in the table below.
About iPod usable with this unit
The unit can be used with the fourth generation and above iPod, iPod
photo, iPod mini or iPod nano. iPod Shuffle cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be
guaranteed.
Fourth generation iPod: Ver 3.1.1
Fifth generation iPod: Ver 1.1.2
iPod photo: Ver.1.2.1
iPod mini: Ver. 1.4.1
iPod nano: Ver. 1.2
Touch [iPod].
0
13
The display shows the iPod mode screen.
Touch [
] or [
] to select the desired song.
Return to the beginning of the current song:
Touch [
].
Fast backward:
Touch and hold [
].
Advance to the beginning of the next song:
Touch [
].
Fast forward:
Touch and hold [
4
—
Artist*
Album*
Song
—
Album*
Song
—
—
Song
—
—
—
Podcast
Episode
—
—
Genre*
Artist*
Album*
Song
Composer*
Album*
Song
—
a
.u
Searching by artist name
1
Touch [
].
/
2
Touch [
] of ARTIST.
The ARTIST search screen is displayed.
3
Select the desired artist.
To play back the artist directly
1 Touch [ ] next to the artist’s name.
All songs of the selected artist are played back.
To search for the album of an artist
1 Touch [
] of the selected artist.
The ALBUM search screen of the selected artist is
displayed.
2 Touch [ ] next to the desired album’s name.
All songs of the selected album are played back.
To search for a song in the album of an artist
].
To pause playback, touch [
Touching [
Hierarchy 4
—
m
o
c
.
Touch [SOURCE] on the main source screen.
The SOURCE selection screen is displayed.
3
Hierarchy 3
Song
The search mode is activated, and the search list screen
appears.
Playback
2
Hierarchy 2
Playlist
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
• The unit cannot be used with the software versions earlier
than “2006-06-28”. For details about “iPod Software
Update,” refer to the iPod Instruction Manual.
1
Hierarchy 1
/
].
] again will resume playback.
• If a song is playing on the iPod when it is connected to the
IVA-W205R/IVA-W202R, it will continue playing after the
connection.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
IVA-W205R/IVA-W202R. Therefore, a maximum of 250 characters is
recommended. The maximum number of characters for the head unit
is 128 (128 byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the IVA-W205R/IVA-W202R.
1 Touch [
] of the desired album in “To search for the
album of an artist” in step 2.
The SONG search screen of the selected album is
displayed.
2 Touch [ ] next to the desired song’s name.
The selected song is played back.
• Touching [ ] of ALL will play back all songs in the list when you are
in a hierarchy with an asterisk “*” (see table above).
• Touching [
] of ALL will display the search list in the next
hierarchy.
• In search mode, you can jump to an assigned position by touching the
direct search bar for quick search. For details, refer to “Direct
Search Function” (page 54).
Autogood products internet store http://130.com.ua
53-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 54 Wednesday, January 24, 2007 2:26 PM
Direct Search Function
Random Play Shuffle (M.I.X.)
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
GENRE/COMPOSER/PODCAST mode, you can quickly target any
song.
The Shuffle function of the iPod is displayed as M.I.X. on the
IVA-W205R/IVA-W202R.
Example of ALBUM search screen
Shuffle ALL:
All songs in the iPod are played back in random sequence. If a
song has been selected in the playlist/artist search mode before
selecting Shuffle song, all songs in the iPod are played back
randomly.
Shuffle Albums:
Select an album randomly in the iPod, and plays back the songs
of the album in sequential order. If a song has been selected in
the playlist/artist search mode before selecting Shuffle Album,
only the albums within the playlist/artist are selected randomly.
The songs of the album are played back sequentially.
Shuffle Songs:
Direct search bar
Active point: The present selection position is displayed.
Touching [ ] or [ ] will move the active point by 1/6
each. Touching and holding [ ] or [ ] will move the
active point continuously.
Returns to the previous screen.
1
1
Touch [ALL
a
.u
M.I.X. SONGS
(Shuffle Songs)
Touch [
m
o
c
.
0
13
<SONG search example>
If there are 100 songs in your iPod, all the songs are allocated in
the direct search bar.
Suppose the song you are searching for is located at around the
50th song of your library: touch around the middle (50%) of the
direct search bar to jump to the song you desire.
Selecting Playlist/Artist/Album/Genre/
Composer/Podcast
Playlist/Artist/Album/Genre/Composer/Podcast can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
Press [ ] or [ ] to select the desired Playlist/
Artist/Album/Genre/Composer/Podcast.
• If the search selection mode is not activated, a SONG search is not
possible.
• If an album is selected from an artist search, the album can be
searched.
• During shuffle (M.I.X.) playback, this operation is not possible.
54-EN
].
The songs will be played back in random sequence.
In search mode, touch anywhere on the direct
search bar, or touch and drag the active point to the
desired place.
The active point moves to the specified place, and the
search list will be changed according to the selected song
position.
1
When songs are selected in the Playlist, Artist, or Album, all
songs of the Playlist, Artist, or Album are performed in random
order.
] after touching [P1/2].
M.I.X. ALBUMS
(Shuffle Albums)
2
(off)
M.I.X. SONGS
(Shuffle Songs)
To cancel M.I.X. play, touch [ALL
(off)
] or [
].
• For details of the search mode, refer to “Searching for a desired
Song” (page 53).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X.), the songs will not play back randomly even when
Shuffle album is selected.
Repeat Play
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Touch [P1/2].
The function guide is displayed.
2
Touch [
].
The file will be played repeatedly.
RPT
(Repeat One)
3
(off)
(Repeat the list being played back)
To cancel repeat play, touch [
].
• During repeat playback, no other songs are selectable by touching
[
] or [
].
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 55 Wednesday, January 24, 2007 2:26 PM
Terminology
Information
Dolby Digital
About DVDs
Music CDs and DVDs have grooves (tracks) in which the digital
data is recorded. The data is represented as microscopic pits
recorded into the track – these pits are read by a laser beam to
play the disc. On DVDs, the density of the tracks and pits is
twice that of CDs, so DVDs can contain more data in less space.
CDs
Dolby Digital is a digital audio compression technology
developed by Dolby Laboratories that allows large quantities of
audio data to be efficiently recorded on discs. It is compatible
with audio signals from mono (1 channel) all the way up to 5.1channel surround sound. The signals for the different channels
are completely independent, and since the sound is high quality
digital there is no loss of sound quality.
* The separately sold digital audio processor (PXA-H701, etc.) is
required to enjoy full 5.1-channel surround sound.
The IVA-W205R/IVA-W202R performs Dolby Digital decoding
when it outputs analogue audio signals, it just happens to be
2-channel audio not 5.1-channel.
Minimum pit
length 0.9 µm
1.2 mm
Track pitch 1.6 µm
DVDs
Centre
speaker
Minimum
pit length 0.9 µm
0.6 mm
0.6 mm
Track pitch 0.74 µm
In addition, DVDs provide sharp picture quality with vivid colours
thanks to a horizontal resolution of over 500 lines (compared to less
than 300 for VHS tape). With the addition of an optional, digital audio
processor (PXA-H701, etc.), you can recreate the power and presence of
a movie theater with Dolby Digital 5.1-channel Surround.
Multiple audio* (page 24)
a
.u
m
o
c
.
A 12 cm disc can contain one movie or about four hours of
music.
0
13
In addition, DVDs offer a variety of functions.
Front
speakers
Movies can be recorded in up to eight languages. The desired
language can be selected from the unit.
Rear
speakers
Subwoofer
Speaker layout for enjoying
Dolby Digital sound/DTS sound
Subtitles function* (page 25)
Movies can include subtitles in up to 32 languages. The desired
subtitle language can be selected from the unit.
Multi angle function* (page 24)
When the DVD contains a movie shot from multiple angles, the
desired angle can be selected from the unit.
Multi story function*
With this function, a single movie includes various story lines.
You can select different story lines to view various versions of the
same movie.
Operation differs from disc to disc. Story line selection screens
including instructions appear during the movie. Just follow the
instructions.
* These functions differ from disc to disc. For details, refer to the disc’s
instructions.
Autogood products internet store http://130.com.ua
55-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 56 Wednesday, January 24, 2007 2:26 PM
DTS
This is a home-use digital sound format of the DTS Sound
System. This is a high quality sound system, developed by DTS,
Inc. for use in movie theatres.
DTS has six independent sound tracks. The theatre presentation
is fully realised in the home and other settings. DTS is the
abbreviation for Digital Theatre System.
* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H701, etc.). The DVD video software
must also have a DTS sound track.
The IVA-W205R/IVA-W202R has a built-in DTS 2-channel audio
decoder. Analogue audio outputs are available.
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels over
the entire frequency range.
This is done with an advance, high sound quality matrix
surround decoder which draws out the spatial properties of the
original recording without adding any sounds to or changing the
sound of the source.
* The separately sold digital audio processor (PXA-H701, etc.) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
a
.u
LPCM is a signal recording format used for music CDs.
Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDs are
recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving
higher sound quality than music CDs.
m
o
c
.
Rating levels (parental lock)
This is a function of the DVD for restricting the viewing age as
stipulated by laws in different countries. The way in which
viewing is restricted differs from DVD to DVD. Sometimes the
DVD cannot be played at all, other times certain scenes are
skipped, and other times certain scenes are replaced with other
scenes.
0
13
56-EN
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 57 Wednesday, January 24, 2007 2:26 PM
List of Language Codes
(For details, see page 30.)
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Abbreviation
IE
IK
IN
IS
IT
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
a
.u
m
o
c
.
0
13
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZH
ZU
Autogood products internet store http://130.com.ua
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
57-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 58 Wednesday, January 24, 2007 2:26 PM
List of Country Codes
(For details, see page 30.)
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
58-EN
Abbreviation
Country
DM
Andorra
DO
United Arab Emirates
DZ
Afghanistan
Antigua and Barbuda
EC
EE
Anguilla
EG
Albania
Armenia
EH
ER
Netherlands Antilles
ES
Angola
Antarctica
ET
FI
Argentina
FJ
American Samoa
Austria
FK
FM
Australia
FO
Aruba
Azerbaijan
FR
GA
Bosnia and Herzegovina
GB
Barbados
Bangladesh
GD
GE
Belgium
GF
Burkina Faso
Bulgaria
GH
GI
Bahrain
GL
Burundi
Benin
GM
GN
Bermuda
GP
Brunei Darussalam
Bolivia
GQ
GR
Brazil
GS
Bahamas
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic
Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote d’lvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
Country
Abbreviation
KI
Dominica
KM
Dominican Republic
KN
Algeria
KP
Ecuador
Estonia
KR
Egypt
KW
Western Sahara
KY
Eritrea
KZ
Spain
LA
Ethiopia
Finland
LB
Fiji
LC
Falkland Islands
Micronesia, Federated States of
LI
Faroe Islands
LK
France
LR
Gabon
LS
United Kingdom
LT
Grenada
LU
Georgia
LV
French Guiana
LY
Ghana
MA
Gibraltar
MC
Greenland
MD
Gambia
MG
Guinea
MH
Guadeloupe
MK
Equatorial Guinea
ML
Greece
MM
South Georgia and the
South Sandwich Islands
MN
MO
Guatemala
MP
Guam
MQ
Guinea-Bissau
MR
Guyana
MS
Hong Kong
MT
Heard Island and
MU
McDonald Islands
MV
Honduras
MW
Croatia
MX
Haiti
MY
Hungary
MZ
Indonesia
NA
Ireland
NC
Israel
NE
India
NF
British Indian Ocean Territory
NG
Iraq
NI
Iran, Islamic Republic of
NL
Iceland
NO
Italy
NP
Jamaica
NR
Jordan
NU
Japan
NZ
Kenya
OM
Kyrgyzstan
PA
Cambodia
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao People’s
Democratic Republic
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
a
.u
m
o
c
.
0
13
Code
7573
7577
7578
7580
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 59 Wednesday, January 24, 2007 2:26 PM
Abbreviation
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Code
8069
8070
8071
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Country
Abbreviation Code
Country
Abbreviation
Peru
TW
8374 Svalbard and Jan Mayen
SJ
French Polynesia
TZ
8375 Slovakia
SK
Papua New Guinea
UA
8376 Sierra Leone
SL
Philippines
UG
8377 San Marino
SM
Pakistan
UM
8378 Senegal
SN
Poland
8379 Somalia
SO
US
Saint Pierre and Miquelon
8382 Suriname
SR
UY
Pitcairn
8384 Sao Tome and Principe
ST
UZ
List
of
Country
Codes_end
SV
Puerto Rico
8386 El Salvador
VA
SY
Portugal
8389 Syrian Arab Republic
VC
SZ
Palau
8390 Swaziland
TC
Paraguay
VE
8467 Turks and Caicos Islands
TD
Qatar
VG
8468 Chad
TF
Reunion
VI
8470 French Southern Territories
TG
Romania
VN
8471 Togo
TH
Russian Federation
VU
8472 Thailand
TJ
Rwanda
WF
8474 Tajikistan
TK
Saudi Arabia
WS
8475 Tokelau
TM
Solomon Islands
YE
8477 Turkmenistan
TN
Seychelles
YT
8478 Tunisia
TO
Sudan
YU
8479 Tonga
TP
Sweden
ZA
8480 East Timor
TR
Singapore
ZM
8482 Turkey
TT
Saint Helena
ZW
8484 Trinidad and Tobago
TV
Slovenia
8486 Tuvalu
Code
8487
8490
8565
8571
8577
a
.u
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
59-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 60 Wednesday, January 24, 2007 2:26 PM
Unclear picture display.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube*.
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items
in the following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the rest of your
system is properly connected, or then consult your authorized
Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected according to the instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with the
proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise, etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
• Blackout mode is activated.
- Cancel Blackout mode.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
* The fluorescent tube replacement is not free of charge even within the
warranty period, for the tube is an article of consumption.
Radio
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
a
.u
m
o
c
.
0
13
Screen not displayed.
• Brightness control is set at the minimum position.
- Adjust the Brightness control.
• Temperature in the vehicle is too low.
- Increase the vehicle’s interior temperature to operation
temperature range.
• Connections to the DVD, CD player, navigation system are not
securely made.
- Check the connections and firmly connect.
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle’s interior temperature to cool.
Unclear or noisy display.
• Fluorescent plate is worn out.
- Replace the fluorescent plate.
Navigation system inoperative.
• Connections to the navigation system are incorrect.
- Check the connections with the navigation system and connect
the cables correctly and firmly.
The optional remote control is inoperative.
• The remote control sensor setting of “Rear Entertainment
Function” is not set to this unit.
- Set for this unit.
CD/MP3/WMA/DVD/Video CD
Disc playback sound is wavering.
• Moisture condensation in the disc Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Make sure the disc is being inserted following the instructions
in the CD/MP3/WMA, DVD/Video CD Player Operation
section.
Unable to fast forward or backward the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your unit
can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
Disc playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
60-EN
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 61 Wednesday, January 24, 2007 2:26 PM
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
Error displays
• Mechanical error.
- *Touch [ ] of DISC on the EJECT/TILT screen. After the
error indication disappears, insert the disc again. If the abovementioned solution does not solve the problem, consult your
nearest Alpine dealer.
* IVA-W202R: Press [
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press [ ] for at least 3 seconds.
] on the front panel.
MP3/WMA is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” (pages 16 and 17), then rewrite
in the format supported by this device.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
No picture is produced.
• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor’s parking brake lead is not connected.
- Connect the monitor’s parking brake wire and set the parking
brake.
(For details, refer to the monitor’s instructions.)
• Mechanism error.
1) *Touch [ ] of DISC on the EJECT/TILT screen and eject
the disc.
If not ejecting, consult your Alpine dealer.
* IVA-W202R: Press [ ] on the front panel.
2) When the error indication remains after ejecting, *touch [ ]
of DISC on the EJECT/TILT screen again.
If the error indication still does not turn off after *touching
[ ] of DISC on the EJECT/TILT screen for a few times,
consult your Alpine dealer.
a
.u
* IVA-W202R: Press [ ] on the front panel.
• Disc was forcibly pulled out by hand during Auto Loading.
- When the error indication remains after loading, try to load
again. If the error indication still does not turn off after
pressing for a few times, consult your Alpine dealer.
m
o
c
.
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to play back with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
0
13
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be slightly disturbed, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
• Monitor’s fluorescent tube is worn.
- Replace the monitor’s fluorescent tube.
Image stops sometimes.
• Disc is scratched.
- Replaced with a non-scratched disc.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- *Touch [ ] of DISC on the EJECT/TILT screen.
- Change the disc.
* IVA-W202R: Press [
] on the front panel.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
Indication for CD/MP3/WMA
Indication for DVD/Video CD
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press [ ] for at least 3 seconds.
Autogood products internet store http://130.com.ua
61-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 62 Wednesday, January 24, 2007 2:26 PM
• Head unit buttons and remote control (optional) operation are
not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Protective circuit is activated to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
• Mechanism error.
1) *Touch [ ] of DISC on the EJECT/TILT screen and eject
the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, *touch [ ]
of DISC on the EJECT/TILT screen again.
If the error indication still does not turn off after *touching
[ ] of DISC on the EJECT/TILT screen for a few times,
consult your Alpine dealer.
* IVA-W202R: Press [
] on the front panel.
* IVA-W202R: Press [
m
o
c
.
0
13
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- *Touch [ ] of DISC on the EJECT/TILT screen.
- Change the disc.
a
.u
• No magazine is loaded into the CD Changer.
- Insert a magazine.
] on the front panel.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
• No indicated disc.
- Choose another disc.
Indication for iPod Mode
• The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the
IVA-W205R/IVA-W202R.
EJECT DISC BEFORE
USING DVD-SETUP
• The DVD setup operation was attempted when a disc is inserted
in the unit.
- Eject the disc before the DVD setup operation.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
unit, using the iPod cable.
Indication for CD changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
62-EN
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
Autogood products internet store http://130.com.ua
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 63 Wednesday, January 24, 2007 2:26 PM
GENERAL
Specifications
Power Requirement
MONITOR SECTION
Operating temperature
Screen Size
6.5"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements 280,800 pcs. (400 × 3 × 234)
Effective Number of Picture Elements
99% or more
Illumination System
Cold cathode fluorescent tube
Maximum Power Output
Output Voltage
Bass
Treble
Weight
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
Audio output level
Preout (Front, Rear):
Preout (Subwoofer):
AUX OUT:
Ai-NET:
87.5 – 108.0 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
80 dB
35 dB
2.0 dB
Width
Height
Depth
531 – 1,602 kHz
22.5 µV/27 dBf
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
153 – 281 kHz
31.6 µV/30 dB
Laser power
a
.u
• Due to continuous product improvement, specifications and design
are subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%.
This means that there is a possibility that 0.01% of the pixels could
be either always ON or OFF.
0
13
5 – 20,000 Hz
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
85 dB (at 1 kHz)
NTSC/PAL
500 lines or greater
1Vp-p (75 ohms)
DVD: 60 dB
More than 105 dB
PICKUP
Wave length
178 mm (7")
100 mm (3-15/16")
165 mm (6-1/2")
m
o
c
.
LW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
2V/10k ohms (max.)
2V/10k ohms (max.)
1.2V/10k ohms
850 mV
CHASSIS SIZE (Monitor section)
MW TUNER SECTION
Tuning Range
Usable Sensitivity
14.4 V DC
(11–16 V allowable)
+32°F to +113°F
(0°C to + 45°C)
50 W × 4
2,000 mV/10k ohms
±14 dB at 60 Hz
±14 dB at 10 kHz
IVA-W205R:3.2 kg
(7 lbs.)
IVA-W202R:3.0 kg
(6 lbs. 9 oz)
CAUTION
CLASS 1
LASER PRODUCT
DVD: 666 nm
CD: 785 nm
CLASS II
(Bottom side of Monitor player)
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of Monitor player)
Autogood products internet store http://130.com.ua
63-EN
01GB06IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 64 Wednesday, January 24, 2007 2:26 PM
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 4 to 6 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, shift lever, brake
pedals, etc. can be extremely hazardous.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
0
13
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
64-EN
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
a
.u
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
m
o
c
.
DO NOT SPLICE INTO ELECTRICAL CABLES.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your IVA-W205R/IVA-W202R. This will reduce any
chance of damage to the unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the IVA-W205R/IVA-W202R to the fuse
box, make sure the fuse for the intended circuit of the
IVA-W205R/IVA-W202R has the appropriate amperage. Failure
to do so may result in damage to the unit and/or the vehicle.
When in doubt, consult your Alpine dealer.
• The IVA-W205R/IVA-W202R uses female RCA-type jacks for
connection to other units (e.g. amplifier) having RCA
connectors. You may need an adaptor to connect other units. If
so, please contact your authorized Alpine dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
• The Display must be completely retracted in the casing when
installing. If it is not, problems may occur.
• When installing in automobiles, make sure the Display can open/
close without coming in contact with the shift lever.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
Autogood products internet store http://130.com.ua
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 65 Wednesday, January 24, 2007 2:26 PM
• If B or C is used, make sure that there is a enough space depthwise
before installing the unit. If the unit is forcibly pushed into the
mounting sleeve, damage may occur.
Installation
Mounting Sleeve
(Included)
Caution
Do not block the unit's fan or heat sink, thus preventing
air circulation. If blocked, heat will accumulate inside
the unit and may cause a fire.
Dashboard
Rubber Cap (Included)
This unit
Braket key
Seal
(Included)
Air ventilation hole
Pressure
Plates*1
Hex Bolt
(Included)
Face Plate*2 (Included)
<Mounting Hole Position>
Rear of the Unit
Position A
Position B
Position C
Caution concerning the installation location
1
Before installing, make sure that the opening and
closing of the display will not interfere with
operation of the shift lever.
Movable Display
a
.u
• Depending on the position chosen, the front panel will protrude
differently.
Front Panel
2
m
o
c
.
0
13
Dashboard
Position A
Front Panel
Angle of installation
Install at an angle of between horizontal and 30°.
Note that installing at an angle outside of this range
will result in a loss of performance and possibly
damage.
Dashboard
Position B
Front Panel
0 -30°
3
Dashboard
Remove the mounting sleeve from the main unit (see
“Removal” on page 66).
The unit can be installed in the mounting sleeve in
three positions by aligning its mounting holes (A to
C) on the sides of the unit. Position A will be used in
most cases. If B or C are to be used, the hole
positions need to be modified.
First, determine the mounting position in the
mounting sleeve, then affix the supplied seal (refer
to “How to use a Seal” on page 66).
Slide the mounting sleeve into the dashboard and fix
it with the metal shackles.
Position C
*1 If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
Autogood products internet store http://130.com.ua
65-EN
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 66 Wednesday, January 24, 2007 2:26 PM
4
How to use a Seal
If A is used for installation:
Affix the seal so that mounting holes B and C are covered.
Screw
Hex Nut (M5)
*2
Metal
Mounting
Strap
If B is used for installation:
Affix the seal so that mounting holes A and C are covered.
Bolt Stud
*1
Ground Lead
This unit
Chassis
When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the IVA-W205R/
IVA-W202R and put the Rubber Cap on the hex bolt.
If your vehicle does not have the Mounting Support,
reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle’s chassis. Connect all the
leads of the IVA-W205R/IVA-W202R according to
details described in the CONNECTION section.
If C is used for installation:
Affix the seal so that the mounting holes A and B are covered.
a
.u
• For the screw marked “*2”, use an appropriate screw for the chosen
mounting location.
m
o
c
.
Installing the Face Plate
*2 If A is used, the face plate may be either 7 mm or 20 mm mounted.
If B is used, the face plate 20 mm must be modified before installing
it.
To modify the face plate, consult your Alpine dealer.
If C is used, the face plate cannot be mounted. Consult your Alpine
dealer.
0
13
5
Slide the IVA-W205R/IVA-W202R into the dashboard
until it clicks. This ensures that the unit is properly
locked and will not accidentally come out from the
dashboard.
Removal
1. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
This unit
Bracket keys
(Included)
2. Pull the unit out, keeping it unlocked as you do so.
66-EN
Autogood products internet store http://130.com.ua
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 67 Wednesday, January 24, 2007 2:26 PM
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
ACC
(Red)
SPST SW (Optional)
IVA-W205R/IVA-W202R
FUSE (5A)
(Optional)
BATTERY
FUSE (20A)
(Optional)
(Yellow)
Battery
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (Sold Separately).
• The diagram and the fuse amperage shown above are in the case when IVA-W205R/IVA-W202R is used individually.
• If the switched power (ignition) lead of the IVA-W205R/IVA-W202R is connected directly to the positive (+) post of the vehicle’s battery, the
IVA-W205R/IVA-W202R draws some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery
may be discharged.
a
.u
m
o
c
.
0
13
To prevent external noise from entering the audio system.
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
•
•
•
•
Autogood products internet store http://130.com.ua
67-EN
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 68 Wednesday, January 24, 2007 2:26 PM
Connections
Antenna
ISO Antenna Plug
JASO Antenna Plug
To Vehicle Display Interface
*2
To Microphone
To Video Output terminal
(Yellow)
(Red)
(White)
To Audio Output terminals
(R, L)
To Video Input terminal
(Yellow)
(Red)
To Audio Input terminals
(R, L)
(White)
REMOTE OUT
(White/Brown)
REMOTE IN
(White/Brown)
To remote input lead
To remote output lead
REVERSE
(Orange/White)
To plus side of the back
lamp signal lead of the car
M.CONT
(White/Pink)
To monitor control lead
To iPod
Rear Left
a
.u
Amplifier
*2
Rear Right
*2
Front Left
Amplifier
m
o
c
.
Front Right
Amplifier
*1
0
13
CD Changer
(Sold Separately)
(Pink/Black)
AUDIO INTERRUPT IN
(Blue/White)
REMOTE TURN-ON
(Yellow/Blue)
PARKING BRAKE
(Red)
Subwoofers
To vehicle phone
To amplifier or equalizer
To the parking brake
signal lead
To power antenna
ACC
(Black) GND
(Blue)
Ignition key
POWER ANT
(Yellow) BATTERY
Battery
Speakers
(Green)
(Green/Black)
(White)
Rear left
Front left
(White/Black)
(Grey/Black)
Front right
(Grey)
(Violet/Black)
Rear right
(Violet)
• Set the system switch to “NORM” when only a changer is connected (when the Ai-NET compatible equalizer is not used).
*1 The label is attached on the bottom of the unit.
*2 IVA-W205R only.
68-EN
Autogood products internet store http://130.com.ua
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 69 Wednesday, January 24, 2007 2:26 PM
Antenna Receptacle
Ai-NET Connector
Vehicle Display Interface Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
• You can input TV/video sound by connecting an optional AiNET/RCA Interface cable (KCA-121B) to this component.
Outputs Vehicle Display Interface control signals. Connect
this to the optional Vehicle Display Interface box.
For details about connections, consult your nearest Alpine
dealer.
Rear Output RCA Connectors
RED is right and WHITE is left.
MIC Input Connector (IVA-W205R only)
Front Output RCA Connectors
To Microphone (sold separately).
RED is right and WHITE is left.
Video Input Connector (AUX INPUT) (Yellow)
Subwoofer RCA Connectors
Input the video.
RED is right and WHITE is left.
Audio Input Connectors (AUX INPUT)
System Switch
RED is right and WHITE is left input the audio.
Video Output Connector (AUX OUTPUT) (Yellow)
Output the video.
Audio Output Connectors (AUX OUTPUT)
RED is right and WHITE is left output the audio.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Power Supply Connector
Ai-NET Cable (Included with CD Changer)
Audio Interrupt In Lead (Pink/Black)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Parking Brake Lead (Yellow/Blue)
a
.u
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-W205R/IVA-W202R.
Switched Power Lead (Ignition) (Red)
m
o
c
.
Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor.
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
RCA Extension Cable (Sold Separately)
Ground Lead (Black)
Monitor Control Lead (White/Pink)
Remote IN/OUT Connector
0
13
FULL SPEED™ Connection Cable (KCE-422i)
(sold separately)
GPS Antenna Receptacle (IVA-W205R only)
To GPS Antenna (sold separately).
Steering Remote Control Interface Connector
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
iPod Direct Connector
iPod control signals.
Connect this to an iPod or to an optional Bluetooth Box
using the FULL SPEED™ Connection Cable (KCE-422i)
(sold separately).
To use a hands-free mobile phone, an optional Bluetooth
Box connection is required. For details on connection, refer
to the Owner’s Manual of the Bluetooth Box.
CAMERA Input Terminal
Use when connecting a back-up camera.
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
TMC Antenna Receptacle (IVA-W205R only)
To TMC Antenna (sold separately).
Digital Output Terminal (Optical)
Use when combining fiber optic digital input compatible
products.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle’s
power antenna. Do not use this lead to turn on an amplifier or a
signal processor, etc.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
Fuse Holder (10A)
ISO Power Supply Connector
ISO Connector (Speaker Output)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (+) Speaker Output Lead (White)
Left Front (–) Speaker Output Lead (White/Black)
Right Front (–) Speaker Output Lead (Grey/Black)
Right Front (+) Speaker Output Lead (Grey)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
ISO/JASO Antenna Adapter (Sold Separately)
ISO/JASO Antenna Adaptor may be required, depending on
the vehicle.
Autogood products internet store http://130.com.ua
69-EN
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 70 Wednesday, January 24, 2007 2:26 PM
System Example
Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), Navigation system, DVD player and
changer.
NVE-N077PS/NVE-N099P
Navigation system
(Sold Separately)
Fiber optic cable
Fiber optic digital Input
terminal (for head unit)
Audio Processor (Ai-NET)
(Fiber Optic Digital
compatible) (Sold
Separately)
Fiber optic digital
Input terminal
(for DVD Player)
a
.u
Ai-NET
cable
m
o
c
.
Ai-NET
Fiber optic cable
EQ/DIV NORM
Ai-NET cable
0
13
(Yellow)
(White/Brown)
REMOTE OUT
(White/Brown)
REMOTE IN
DVD Video Player
(Ai-NET)
(DVA-5210 etc.)
(Sold Separately)
Ai-NET cable
Fiber optic digital
Input terminal (for
Changer)
*Fiber
optic cable
CD Changer
(Ai-NET)
(Sold Separately)
*Only connect fiber optic digital compatible CD Changer
• When the fiber optic compatible product is connected, it is necessary to set the mode of this unit. Refer to “Setting the Digital Output” (page 37)
and set to ON.
• When the NVE-N055PS is connected for the Navigation System, use the RGB conversion cable KCE-030N (Sold Separately).
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
70-EN
Autogood products internet store http://130.com.ua
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 71 Wednesday, January 24, 2007 2:26 PM
RGB Cable (Included with Navigation)
Remote IN/OUT Connector
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Digital Output Terminal
Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
Video Input Connector (AUX INPUT) (Yellow)
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
RCA Extension Cable (Included with DVD video
player)
Ai-NET Cable (Included with DVD video player)
Fiber Optic Cable (Sold Separately)
a
.u
Ai-NET Cable (Included with Audio Processor)
Ai-NET Cable (Included with CD Changer)
Remote Control Output Lead (White/Brown)
m
o
c
.
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
To Ai-NET Connector (Grey)
To Ai-NET Connector (Black)
0
13
Autogood products internet store http://130.com.ua
71-EN
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 72 Wednesday, January 24, 2007 2:26 PM
When Connecting External Equipment
To Audio Input terminal
Rear monitor
(Sold Separately)
To Video Input terminal
To Video Output terminal
Back-up camera
(Sold Separately)
Ai-NET
EQ/DIV NORM
To Video Output terminal
TV Tuner or VCR
(Sold Separately)
To Audio Output terminal
(White/Pink)
M.CONT
* Connect this to the touch panel-compatible rear monitor.
(White/Brown)
REMOTE OUT
(White/Brown)
REMOTE IN
(Orange/White)
REVERSE
System Switch
a
.u
m
o
c
.
M.CONT
0
13
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
REMOTE IN
REMOTE OUT
(White/Pink)
(White/Brown)
(White/Brown)
Use only when back-up camera is connected.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Reverse Lead (Orange/White)
Use when connecting a back-up camera.
Connect to the plus side of the car’s reverse lamp which
lights when the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked to putting the car into reverse (R).
Video/Audio Output Connectors (AUX OUTPUT)
RCA Extension Cable (Sold Separately)
Remote IN/OUT Connector
CAMERA Input Terminal
Use when connecting an optional monitor etc.
Video/Audio Input Connectors (AUX INPUT)
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor.
72-EN
Autogood products internet store http://130.com.ua
01GB07IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 2 Wednesday, January 24, 2007 2:26 PM
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
01GB02IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
68-08564Z42-A_F.book Page 73 Wednesday, January 24, 2007 2:26 PM
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
PS Card Euro - 73
68-08564Z42-A_F.book Page 74 Wednesday, January 24, 2007 2:26 PM
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
PS Card Euro - 74
68-08564Z42-A_F.book Page 75 Wednesday, January 24, 2007 2:26 PM
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
PS Card Euro - 75
68-08564Z42-A_F.book Page 76 Wednesday, January 24, 2007 2:26 PM
Appendix
Product Information Card
Produkt-Informationskarte
English
Filling in this Product Information Card is
voluntary. If you fill in this card and send
it to Alpine, your data will be tabulated
into reference data for future Alpine
product development. In addition, in the
future you may receive information about
new products or Survey Mail requesting
additional opinions about Alpine products
or services. If you agree to the above term,
please sign your name in the indicated
space and return the card. Any additional
comments or inquiries may be sent to :
Person in charge of Customer Service
department Alpine Electronics (Europe)
GmbH.
Frankfurter Ring 117, 80807 München,
Germany
Phone: +49-(0)89-32 42 640
Q1. PRODUCT PURCHASED
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Cassette Player
CD Player
MD Player
DVD Player
CD Changer
Amplifier
Speaker
Subwoofer
Monitor Controller
Video Monitor
Navigation
Processor/Equalizer
CD/Video CD Changer
Other
Q2. MODEL NUMBER:
Q3. DATE OF PURCHASE:
Month:
1. Alpine → (Model No.)
2. Other → (Brand Name)
Q5. STORE TYPE WHERE PURCHASED:
1.
2.
3.
4.
5.
Car Audio Specialist
Audio/Video Store
Electronics/Appliance Store
Car Accessories Shop
Other
Q6. Type of vehicle in which this unit is
installed:
Make:
Purchased
Year:
Model:
Model
Year:
Q7. How was this vehicle purchased?
1. Purchase
2. Lease
Q8. Purpose of buying this unit?
1.
2.
↓
•
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Kassetten-Spieler
CD-Spieler
MD-Spieler
DVD-Spieler
CD-Wechsler
Verstärker
Lautsprecher
Subwoofer
Monitor-Controller
Video-Monitor
Navigationssystem
Prozessor/Equalizer
CD/Video-CD-Wechsler
andere
Monat:
Jahr:
1. Alpine → (Modellnr.)
2. Anderer Hersteller →
(Herstellername)
0
13
Q5. Art des Geschäfts, in dem Sie das
Gerät gekauft haben:
Spezialist für Auto-Audioanlagen
Audio/Video-Geschäft
Elektro-Geschäft
Autozubehör-Geschäft
Anderer Hersteller
Q6. Art des Fahrzeugs, in das das Gerät
installiert wurde:
Marke:
gekauft im
Jahr:
Baujahr:
Q7. Wie haben Sie das Fahrzeug gekauft?
1. First time
2. Two or More times
Q10.When you purchased this Alpine unit,
did you compare it with other brand?
1. Yes → (Brand Name)
2. No.
Zusätzlich
Austausch
Marke des ausgetauschten Geräts?
Serienmäßige Ausstattung
Alpine
Anderer Hersteller →
(Herstellername)
Q9. War dies das erste Mal, dass Sie ein
Alpine-Gerät gekauft haben?
1. Erstes Mal
2. Zweites Mal oder öfter
Q10.Haben Sie dieses Alpine-Gerät vor
dem Kauf mit Geräten anderer
Hersteller verglichen?
Q11.GENDER
1. Male
2. Female
Q12.AGE
Q13.MARITAL STATUS
1. Ja → (Herstellername)
2. Nein
Q11.Geschlecht
1. Single
2. Married
Q14.OCCUPATION
Company Owner/Self-employed/Freelance
Manager
Company Employee
Civil Servant
Educator
Student
Other
Q15.Comments
1.
2.
↓
•
1.
2.
3.
1. Männlich
2. Weiblich
Q12.Alter
Q13.Familienstand
1. Ledig
2. Verheiratet
Q14.Beruf
1. Selbständige/Firmeninhaber/freiberuflich
Tätige
2. Leitende Angestellte
3. Sonstige Angestellte
4. Beamte
5. Schulbildung
6. Studium
7. Sonstige
Q15.Kommentar:
Q1. PRODUIT ACHETE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Lecteur de cassette
Lecteur de CD
Lecteur MD
Lecteur DVD
Changeur de CD
Amplificateur
Haut-parleur
Haut-parleur de graves
Station Multimedia
Moniteur Vidéo
Navigation
Processeur/Egaliseur
Changeur de CD/CD Vidéo
Autre
Mois:
Q5. TYPE DE MAGASIN OU VOUS AVEZ
ACHETE LE PRODUIT:
Spécialiste autoradio
Magasin audio/vidéo
Magasin d’électronique/appareils
Magasin d’accessoires automobiles
Autre
Q6. Type de véhicule dans lequel cet
appareil est installé:
Marque:
Année
d’achat:
Modèle:
Année du
modèle:
Q7. Comment avez-vous acheté ce
véhicule?
1. Achat
2. Location-bail
Q8. Pourquoi avez-vous acheté cet
appareil?
1.
2.
↓
•
1.
2.
3.
Addition
Remplacement
Marque précédente remplacée?
Installée en usine
Alpine
Autre → (Marque)
Q9. Aviez-vous déjà acheté des produits
Alpine?
1. Première fois
2. Deux fois ou plus
Q10.Lorsque vous avez acheté ce produit
Alpine, l’avez-vous comparé à une
autre marque?
1. Oui → (Marque)
2. Non
Q11.SEXE
1. Masculin
2. Féminin
Q12.AGE
Q13.SITUATION DE FAMILLE
1. Célibataire
2. Marié
Q14.PROFESSION
1. Entrepreneur/Travailleur indépendant/Freelance
2. Directeur
3. Employé de bureau
4. Fonctionnaire
5. Educateur
6. Etudiant
7. Autre
Q15.Commentaires
Autogood products internet store http://130.com.ua
PS Card Euro - 76
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Radio/Cassette
Radio/CD
Reproductor de MD
Reproductor de DVD
Cambiador de CD
Amplificador
Altavoz
Subwoofer
Monitor de control
Monitor de video
Sistema de navegación
Procesador/Ecualizador
Cambiador de CD/Video CD
Otros
Q2. Número de modelo:
Q3. Fecha de compra:
Mes:
Année:
1. Alpine → (N° du modèle)
2. Autre → (Marque)
1.
2.
3.
4.
5.
Q1. Producto Comprado
a
.u
Q4. Si c’est un système de navigation, quel
moniteur?
Modell:
Q8. Zweck des Kaufs dieses Geräts?
Previous brand replaced?
Factory installed
Alpine
Other → (Brand Name)
Español
El envío de la información solicitada es
voluntario. Si Vd. nos la remite, será
utilizada de modo confidencial para el
desarrollo de futuros productos Alpine. Si
Vd. desea recibir información sobre
nuevos productos de nuestra gama,
indique su nombre en el espacio designado
y remítanos la tarjeta. Cualquier solicitud
adicional puede ser enviada a : Persona
responsable del Servicio de Atención al
Cliente de Alpine Electronics (Europe)
GmbH.
Frankfurter Ring 117, 80807 München,
Germany
Phone: +49-(0)89-32 42 640
Q2. NUMERO DU MODELE:
Q3. DATE D’ACHAT:
Q4. Falls Navigationssystem:
Welcher Monitor?
1.
2.
3.
4.
5.
Français
En remplissant volontairement cette fiche,
et en l’envoyant à Alpine, vous acceptez
que ces informations soient utilisées par
Alpine, dans le cadre de développement
de nouveaux produits. Par ailleurs, vous
autorisez Alpine à solliciter votre opinion
par mailing sur de nouveaux produits ou
services. Si vous acceptez les termes cidessus, veuillez signer cette carte à
l’endroit indiqué, et nous la retourner.
Tout autre commentaire ou demande doit
être adressé à l’attention de: Responsable
du service consommateur Alpine
Electronics (Europe) GmbH.
Frankfurter Ring 117, 80807 München,
Germany
Phone: +49-(0)89-32 42 640
m
o
c
.
Q2. Modellnummer:
Q3. Kaufdatum:
1. Kauf
2. Leasing
Addition
Replacement
Q9. Have you purchased Alpine products
before?
1.
2.
3.
4.
5.
6.
7.
Deutsch
Das Ausfüllen dieser
Produktinformations-Karte ist freiwillig.
Sollten Sie diese Karte vervollständigen,
so werden die Daten für zukünftige
Produktentwicklungen von Alpine als
Referenzdaten herangezogen. Ebenso
können Sie in der Zukunft Informationen
über neue Alpine Produkte erhalten oder
uns auch Ihre Meinung über Alpine
Produkte und Dienstleistungen im
Rahmen von Kunden-Befragungen
mitteilen. Stimmen Sie dem Kontakt durch
Alpine zu, so würden wir Sie bitten, in
dem dafür vorgesehenen Feld zu
unterschreiben und die Karte kostenfrei an
uns zurückzuschicken. Zusätzliche
Kommentare und Meinungen können Sie
gerne an den zuständigen Kontakt im
Kundendienst Alpine Electronics (Europe)
GmbH senden.
Frankfurter Ring 117, 80807 München, Germany
Phone: 089-32 42 640
Q1. gekauftes Gerät
Year:
Q4. If navigation system, which monitor?
Carte d’informations sur le Tarjeta de información del
produit
producto
Año:
Q4. En caso de sistema de navegación,
¿qué monitor?
1. Alpine → (N° de modelo)
2. Otros → (Nombre de marca)
Q5. TIPO DE TIENDA DONDE COMPRÓ:
1.
2.
3.
4.
5.
Especialista en audio de automóviles
Tienda de audio/video
Tienda de electrónica/electrodomésticos
Tienda de accesorios automovilísticos
Otros
Q6. Tipo de vehiculo en que la unidad está
instalada:
Marca:
Año de
compra:
Modelo:
Año del
modelo:
Q7. ¿Cómo fue comprado este vehiculo?
1. compra
2. Leasing
Q8. ¿Propósito de comprar esta unidad?
1.
2.
↓
•
1.
2.
3.
Mejora del sistema
Sustitución
¿Sustitución de marca anterior?
Instalado en la fábrica
Alpine
Otros → (Nombre de marca)
Q9. ¿Ha comprado Vd. productos Alpine
anteriormente?
1. Primera vez
2. Dos o más veces
Q10.Cuando usted compró esta unidad
Alpine, ¿la comparó con otros
fabricantes?
1. Si → (Nombre de marca)
2. No
Q11.SEXO
1. Masculino
2. Femenino
Q12.Edad
Q13.Estado civil
1. Soltero
2. Casado
Q14.Ocupación
1. Propietario de empresa/Autónomo/
Profesional independiente
2. Gerente
3. Empleado de compañia
4. Empleado público
5. Profesor
6. Estudiante
7. Otros
Q15.Comentarios
68-08564Z42-A_F.book Page 77 Wednesday, January 24, 2007 2:26 PM
Scheda informazioni
prodotto
Italiano
La compilazione di questa formulario è
volontaria. Se compilate questo
formulario, ritornandolo ad Alpine, i
Vostri dati saranno raccolti in un file di
riferimento per lo sviluppo dei nuovi
prodotti Alpine. In aggiunta Voi potrete
ricevere in futuro informazioni riguardanti
i nuovi prodotti o la richiesta di una Vostra
opinione circa i prodotti o i servizi forniti
da Alpine. Se siete d’accordo, Vi
preghiamo di ritornarci il formulario
completato negli appositi spazi con i
Vostri dati. In caso desideriate fornire altri
commenti o richiedere informazioni
aggiuntive, potete indirizzare il tutto a :
Responsabile dipartimento Servizio
Clienti Alpine Electronics (Europe)
GmbH.
Frankfurter Ring 117, 80807 München,
Germany
Phone: +49-(0)89-32 42 640
Q1. PRODOTTO ACQUISTATO
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Lettore di cassette
Lettore CD
Lettore MD
Lettore DVD
CD Changer
Amplificatore
Altoparlante
Subwoofer
Radio Monitor
Monitor video
Sistema di navigazione
Processore/equalizzatore
Cambia CD/Video CD
Altro
a
.u
m
o
c
.
Q2. NUMERO MODELLO:
Q3. DATA DI ACQUISTO:
Mese:
Anno:
Q4. In caso di acquisto di un sistema di
navigazione, quale monitor possiede?
1. Alpine → (No. Modello)
2. Altro → Nome marca
Q5. NEGOZIO DI ACQUISTO:
1.
2.
3.
4.
5.
Specialista Car Stereo
Negozio di audio/video
Negozio di elettronica/elettrodomestici
Negozio accessori automobile
Altro
Q6. Tipo di veicolo posseduto:
Marca:
Anno
acquisto:
Modello:
Anno
modello:
Q7. Modalità acquisto
1. Acquisto
2. Leasing
Q8. Scopo acquisto
1.
2.
↓
•
1.
2.
3.
0
13
Aggiunta
Sostituzione
Marca sostituita
Installato di fabbrica
Alpine
Altro → (Nome marca)
Q9. Avevate già acquistato prodotti Alpine?
1. No
2. Due o tre volte
Q10.Nell’acquistarlo, avete paragonato
questo prodotto ad un’altra marca?
1. Si → (Nome marca)
2. No
Q11.SESSO
1. Maschile
2. Femminile
Q12.ETÀ
Q13.STATO CIVILE
1. Celibe/nubile
2. Coniugato/coniugata
Q14.LAVORO
1. Proprietario di azienda/artigiano/libero
professionista
2. Manager
3. Impiegato
4. Impiegato statale
5. Insegnante
6. Studente
7. Altro
Q15.Commenti
Autogood products internet store http://130.com.ua
PS Card Euro - 77
68-08564Z42-A_F.book Page 78 Wednesday, January 24, 2007 2:26 PM
S/NO. LABEL
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
PS Card Euro - 78
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement