advertisement
Important Safety Precautions and Explanation of Symbols
!
!
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important installation, operation, and service instructions in this manual.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to the user.
Please read this manual thoroughly before attempting to install, configure, or operate the Emotiva Airmotiv
Subwoofer. After successful installation and configuration of the Airmotiv Subwoofer, be sure to retain this manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and follow all instructions and heed all warnings on the Airmotiv Subwoofer and in this manual. The vast majority of the subsequent safety precautions are common sense. If you are not comfortable with the installation of audio/ video entertainment equipment, you should seek the services of a qualified installation professional or call us for help.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THE AIRMOTIV
SUBWOOFER NEAR WATER OR IN WET LOCATIONS, DO NOT EXPOSE IT TO RAIN OR MOISTURE, DO
NOT EXPOSE IT TO DRIPPING OR SPLASHING FROM OTHER SOURCES, AND ENSURE THAT NO OBJECTS
FILLED WITH LIQUIDS (SUCH AS VASES) ARE PLACED ON IT. DOING SO MAY RESULT IN DAMAGE TO
THE UNIT AND THE RISK OF ELECTRIC SHOCK, WHICH MAY RESULT IN BODILY INJURY OR DEATH.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE AMPLIFIER PLATE OR
DRIVERS FROM THE AIRMOTIV SUBWOOFER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE
UNIT. REFER ALL SERVICE TO QUALIFIED SERVICE PERSONNEL.
Do not install the Airmotiv Subwoofer near or above any heat sources such as radiators, heating vents, or other apparatus’ that produce heat. Do not block any ventilation openings or heat sinks. Avoid installing the unit directly above other heat-producing equipment unless sufficient ventilation or forced-air cooling is provided.
Do not install the Airmotiv Subwoofer in locations without proper ventilation. The Airmotiv Subwoofer should not be operated on a bed, sofa, rug, or similar surface that may block vents. The unit should not be installed in an enclosed location such as a bookcase, cabinet, or closed equipment rack unless sufficient forced-air ventilation is provided, and clearance should be maintained between the rear-mounted heat sinks and objects like drapes that may reduce ventilation.
Always install your Airmotiv Subwoofer according to the manufacturer’s instructions and only use attachments or accessories specified by the manufacturer.
Do not install the Airmotiv Subwoofer on any stand, shelf, or other piece of furniture that is unable to support its weight. If a cart is used to move the unit, use caution to avoid injury from tip-over.
Connect the Airmotiv Subwoofer only to power sources of the correct voltage (as shown in this manual and on the Airmotiv Subwoofer unit).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be especially careful where the power cable enters the power outlet and the unit.
Only connect the Airmotiv Subwoofer to an electrical outlet or extension cord of appropriate type and rating.
!
DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins or using unsafe adapters. A polarized plug has two blades - one wider than the other. A grounding plug has a third ground prong in addition to the two main conductors. The wide blade or third groundling prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician to replace your obsolete outlet. If you replace the power cord, only use one of similar type and equal or greater current rating.
The power cable for the Airmotiv Subwoofer should be unplugged from the outlet during severe electrical storms, or when unused for a long period of time.
Only replace the fuse(s) in the Airmotiv Subwoofer with fuse(s) of proper value and voltage rating.
The Airmotiv Subwoofer should only be cleaned as directed in the manual. Avoid spraying liquids directly onto the unit or drivers.
You should seek service for your Airmotiv Subwoofer by qualified service personnel if any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The unit has been exposed to rain.
4. The unit exhibits a marked change in performance.
5. The unit has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE AIRMOTIV SUBWOOFER FROM THE AC POWER MAINS,
DISCONNECT THE AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE POWER CORD ON THE AIRMOTIV SUBWOOFER MUST REMAIN READILY ACCESSIBLE AT ALL
TIMES.
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
AIRMOTIV SUBWOOFERS
Airmotiv Subwoofers
Contents
Important Safety Precautions and Explanation of Symbols
Airmotiv Subwoofers .....................................................................................................1
Introduction ......................................................................................................................3
About This Manual ..........................................................................................................4
Features ..............................................................................................................................5
Unpacking ..........................................................................................................................6
Quick Start .........................................................................................................................7
Setting The AC Line Voltage on Your Subwoofer .................................................7
Airmotiv Subwoofer Controls .....................................................................................8
Airmotiv S15 ................................................................................................................... 11
Airmotiv S12 ................................................................................................................... 12
Airmotiv S10 ................................................................................................................... 13
Subwoofer Placement and Configuration ........................................................... 14
Connections ................................................................................................................... 17
Care and Maintenance ............................................................................................... 18
Emotiva Audio Corporation Five-Year Limited Warranty ............................... 19
Accessories ..................................................................................................................... 22
Notes ................................................................................................................................. 22
Page 1
AIRMOTIV SUBWOOFERS
Page 2
AIRMOTIV SUBWOOFERS
Introduction
Thank you for purchasing a new Emotiva Airmotiv™ Subwoofer.
Emotiva Airmotiv™ Subwoofers were designed to reproduce the lowest frequencies in the audio spectrum accurately and with exceptionally low distortion - even at the high listening levels in modern movies. This means that our Airmotiv Subwoofers can deliver all the dynamics and raw power you need to make a modern movie sound track rattle the walls, but still offer the precision and superb musicality you need to get the most from well recorded music. With our Airmotiv
Subwoofers, you don’t have to compromise; you really can have it all.
Our Airmotiv Subwoofers come in three models: the S10, the S12, and the S15. Each model includes a downward firing heavy duty high excursion powered bass driver, and a front mounted performance matched high excursion passive radiator, and each model is powered by a powerful audiophile quality Class A/B amplifier. The various models offer identical controls and features; the main difference is that the larger models have more power and can produce higher output levels, and their frequency response extends slightly lower.
The cabinets, which are quite compact for the performance they deliver, combine massive, heavily braced construction, and an attractive design aesthetic that blends well with most decor. The attractive faceted front panels feature an elegant black lacquer finish, and the sides and rear panels are covered in attractive yet practical textured vinyl. Sculpted cloth grills perfectly match the outline of the cabinet bevels, and heavy duty integral feet provide support and minimize vibration. All controls and connections are conveniently located on the rear panel, which also includes the highefficiency heat sinks that provide cooling for the internal amplifiers.
We’re very proud of our new Airmotiv Subwoofers, and we hope you’ll enjoy listening to them as much as we enjoyed designing and manufacturing them.
Happy listening!
The Emotiva Team
Page 3
AIRMOTIV SUBWOOFERS
About This Manual
This manual will provide you with all the information you need to achieve great performance, accurate sound, and many years of reliable service from your Airmotiv Subwoofer.
We suggest that you read through the entire manual; we kept things as short and direct as possible. Even if you’re an expert user, you will probably find some interesting information and useful suggestions.
If you’re really in a hurry to get started, please read the Quick Start section (on page 7); you may then read the remainder of the manual at your leisure.
You may wish to record serial numbers or other purchase information on the Notes page at the back of this manual.
Page 4
AIRMOTIV SUBWOOFERS
Features
Our Emotiva Airmotiv™ Subwoofers were designed to offer truly exceptional performance and superb sound quality - with both music and movies. Their design and performance features were carefully chosen to appeal to both home theater buffs and audiophiles, with a choice of input options and operating modes well suited to a wide variety of applications, and the controls needed to perfectly match them to any system or room.
The following are a few of the feature highlights of our Airmotiv Subwoofers:
• High performance, compact size, and great sound - All of our Airmotiv Subwoofers offer superb sound quality, low distortion, and high output - in a relatively compact form factor.
They’re also available in three different models - 10”, 12”, and 15” - so you can choose the perfect combination of maximum output, low frequency extension, and cabinet size.
• Powerful audiophile quality Class A/B amplifiers - powered by oversized toroidal power transformers, provide our Airmotiv subs with plenty of power to fully energize your room with clean low distortion bass.
• Flexible input and control options - including both balanced and unbalanced inputs, and a
LF Boost control, which allows you to customize bass response in the lowest octave.
• Advanced multi-stage limiter - protects our Airmotiv subwoofers from being overdriven, and keeps distortion from intruding on your listening experience.
• Downward firing active driver and forward firing passive radiator - evenly load the room with deep powerful omnidirectional bass with no port noise or other distractions.
• Non-pressed treated paper cones on both drivers - reinforced with aramid fibers for excellent rigidity and optimal internal acoustic damping.
• Rugged construction - Cast aluminum baskets, tough SBR rubber surrounds, and large internal clearances on both drivers ensure years of trouble free service.
• Powerful heavy duty motor assembly - includes a large diameter double stacked ferrite magnet, and a large diameter heavy duty solid copper voice coil on an aluminum former, for superior power handling and low distortion.
• Plenty of cooling for long life - Forced air cooling, a vented pole piece, and vents located under the spider, ensure that our drivers remain cool, even with extended use under demanding operating conditions.
• Tough yet attractive exterior - Several coats of satin-finish lacquer give the front panel of our
Airmotiv subwoofers an elegant understated appearance, while a tough yet attractive vinyl covering protects the sides and rear from damage and fingerprints.
• Removable sculpted fabric grilles - protect the front mounted passive radiator and keep your technology under wraps, but can be easily removed for cleaning - or to show off your
Airmotiv sub to your audiophile friends.
• Heavily braced acoustically inert MDF cabinet - ensures that the only sound you’ll hear from our Airmotiv subs is pure clean bass., and integral non-slip rubber feet ensure that your
Airmotiv sub will stay exactly where you want it.
• Full five year warranty - ensures that you’ll enjoy your Airmotiv subs for years to come.
You can find more information about the Emotiva Airmotiv Subwoofers on our website at www.emotiva.com.
Page 5
AIRMOTIV SUBWOOFERS
Unpacking
Your Airmotiv subwoofer was carefully packed and should reach you in perfect condition. If you notice any shipping damage or other issues when you unpack it, please contact Emotiva immediately.
Gently remove your Airmotiv subwoofer from the packing carton and remove all wrappings and shipping material. Avoid pressing directly on the front of the drivers.
It is important to save the box and all packing materials in case your Airmotiv subwoofer ever needs to be moved or shipped back to the factory for service.
Please keep your sales receipt in a safe place. It is the easiest way to verify your purchase date for warranty purposes, and may also be required if you ever have to file an insurance claim.
We truly value customer feedback and would like to hear from you.
Page 6
AIRMOTIV SUBWOOFERS
Quick Start
To get the most from your Airmotiv subwoofer, we urge you to read the entire manual. If you just can’t wait to hear how great your Airmotiv sub sounds, this section will cover the basics you need to get started.
• Find a secure location for your Airmotiv subwoofer.
• Make sure your Airmotiv sub is set for the proper line voltage for your area.
• Connect your Airmotiv sub to the LFE or subwoofer output on your AVR or pre/pro.
• Configure your AVR or pre/pro to expect a subwoofer.
• Find some music you really like to listen to.
• Enjoy!
While you’re enjoying your Airmotiv sub, it would be a great time to read the rest of the manual to learn more about them.
Setting The AC Line Voltage on Your Subwoofer
If you ordered your Airmotiv subwoofer directly from Emotiva, it should already be set for the correct line voltage for your area. However, we always recommend confirming the correct setting before plugging in your Airmotiv sub. If you move to a different country, or a different region, with a different line voltage, you MUST change the Line Voltage setting on your Airmotiv sub to the correct line voltage.
Note: Attempting to operate your Airmotiv subwoofer with the Line Voltage Selector Switch set to the wrong voltage for your area may result in damage to your Airmotiv subwoofer.
In order to change the line voltage on your Airmotiv sub, there are two changes which must be made.
1) Change the setting on the Line Voltage Selector Switch on the rear of the unit to the correct voltage for your area.
2) Change the fuse to the appropriate value for that line voltage
Note:
See pages 8 through 10 for the location of the Line Voltage Selector Switch and Fuse Holder.
See pages 11 through 13 for the correct fuse value for the model of Airmotiv subwoofer you have and your line voltage.
Page 7
AIRMOTIV SUBWOOFERS
Airmotiv Subwoofer Controls
3
4
1
2
5
6
7
8
9
10
11
12
All of the controls and input connections on the Airmtoiv S10, S12, and S15 are on the rear panel.
All three models offer the same input and control options (the Airmotiv S12 is shown).
1. RCA Inputs (unbalanced)
The Airmotiv subwoofer has two unbalanced line level audio inputs, which are summed together internally. If your source component provides separate left and right subwoofer or full range outputs, they should be connected to the Left and Right RCA inputs. If your source provides a single unbalanced subwoofer output, it may be connected to either RCA input.
2. Balanced Input
If your source component has a single balanced subwoofer or LFE output, then it should be connected to this input. (If your source component offers both balanced and unbalanced outputs, the balanced connection is preferred because it offers better resistance to line noise, especially if you are using a long interconnect cable, or if your interconnect runs through the wall or near a power cable.)
Page 8
AIRMOTIV SUBWOOFERS
3. Power Mode Switch
Note: Your Airmotiv sub will only operate if the AC POWER Switch is turned ON. If the AC POWER
Switch is OFF, your Airmotiv sub will NOT operate.
When the Power Mode Switch is set to On, the Airmotiv sub will remain On continuously.
When the Power Mode Switch is set to Auto, the Airmotiv sub will turn On automatically when incoming audio is detected. Once the Airmotiv sub is On, it will remain On for several minutes; if no audio is detected after several minutes, the Airmotiv sub will return to Standby Mode.
4. Power Indicator
The Power Indicator will be illuminated green when the Airmotiv sub is On, and will be illuminated red when the Airmotiv sub is in Standby Mode.
5. Volume Control
This control sets the relative gain of your Airmotiv sub. Use this control to set the amount of bass delivered by your Airmotiv sub to be a good match for the output of your main speakers.
6. LF Boost Control
The LF Boost control is used to fine tune the response of the Airmotiv subwoofer at very low frequencies to your room and personal preference. The response of your Airmotiv subwoofer will be flattest with this control set to the vertical (center) position; in the fully counterclockwise position (left), bass is reduced by approximately -3 dB at 30 Hz; in the fully clockwise position
(right), bass is boosted approximately +6 dB at 30 Hz.
Note: If your system has automatic room correction, you should set this control to its center
(flat) position before running room correction. Then, after running room correction, use the control to add a little more or less low bass to suit your personal preference.
7. Crossover Control
Airmotiv subwoofers include a built-in 12 dB/octave crossover (low pass filter). This control allows you to adjust the crossover frequency for the best match with your main speakers. If you’re using your Airmotiv sub with a home theater pre/pro or AVR that has its own bass management, you should set this control to highest frequency setting (fully clockwise - 150 Hz). If not, then the proper setting will depend on your main speakers, but 80 Hz (about 10 o’clock) is a good starting point - and is often considered to be a standard setting for home theater equipment.
8. Phase Control
The phase control is used to adjust the phase on your sub to match the phase of your main speakers. The best setting here will depend on your main speakers and where your sub is located in relation to them. This control is usually set to the point where you hear the most bass in the range of frequencies where the sub overlaps with your main speakers.
Page 9
AIRMOTIV SUBWOOFERS
9. AC Power Switch
Use this switch to turn the main AC Power to your Airmotiv subwoofer On and Off.
Note: Your Airmotiv sub will only operate if the AC POWER Switch is turned ON. If the AC POWER
Switch is OFF, your Airmotiv sub will NOT operate, and the Power Mode Switch will have no effect.
10. Line Voltage Selector
This switch is used to select the appropriate line voltage for your area.
Note: Be sure to set this switch to the correct line voltage for your area. If you fail to do so, damage to your Airmotiv sub may result.
Note: If you change the Line Voltage setting, you should also change the FUSE in the Airmotiv
Sub to the appropriate value (one fuse in each value is provided with your Airmotiv subwoofer).
11. IEC Power Cable Receptacle
The IEC Power Cable receptacle accepts any standard IEC power cable. A high quality commercial power cable is provided with your Airmotiv subwoofer.
12. Fuse Holder
To change the fuse in your Airmotiv subwoofer, remove the power cable, then gently pry the fuse compartment open. (The fuse holder opens like a drawer.) Replace the fuse with one of the correct value, replace the fuse drawer, and reinsert the power cable.
Note: If the fuse in your Airmotiv subwoofer blows repeatedly without apparent reason, then you might have an electrical fault in your Airmotiv subwoofer, and you should call Emotiva
Technical Support for assistance.
Page 10
Airmotiv S15
AIRMOTIV SUBWOOFERS
The Airmotiv S15 is the ideal way to extend the bass response of your audio system to cover the last few critical octaves of bass with authority and finesse. The
Airmotiv S15 can deliver the raw power you need to add that final touch of realism to a movie, while still offering the low distortion and precise control you need for accurate, superb sounding music reproduction.
Driver Complement
Active driver: 15” downward firing heavy duty long throw subwoofer with cast aluminum frame, 2-1/2” copper voice coil, non-pressed paper cone reinforced with aramid fibers, tough SBR rubber surround, vented pole piece, and forced air cooling.
Passive radiator: 15” front firing passive radiator with cast aluminum frame, non-pressed paper cone reinforced with aramid fibers, and tough SBR rubber surround.
Cabinet
Heavily braced acoustically inert MDF cabinet with removable sculpted fabric-covered grill. The front bezel is finished in several coats of satin finish black lacquer; the sides and rear are covered in tough attractive textured vinyl.
Electronics
Amplifier type: Audiophile quality Class A/B amplifier.
Amplifier power: 650 Watts RMS.
Protection: Advanced multi-stage low-distortion limiter.
Frequency response: 20 Hz - 200 Hz (+/- 3 dB).
Inputs: Single XLR balanced input; summed left and right RCA unbalanced inputs.
Controls: Crossover, Phase, Volume, LF Boost.
AC power: User selectable line voltage;
115 VAC/60 Hz (6.3A Fuse); 230 VAC/50 Hz (3A Fuse).
Mechanical
Dimensions: 23-1/2” high x 17-3/4” wide x 21-1/2” deep.
Weight: 95.3 pounds.
Feet: Permanently attached anti-slip rubber feet
.
Page 11
Airmotiv S12
AIRMOTIV SUBWOOFERS
The Airmotiv S12 is the ideal way to extend the bass response of your audio system to cover the last few critical octaves of bass with authority and finesse. The Airmotiv S12 can deliver the raw power you need to add that final touch of realism to a movie, while still offering the low distortion and precise control you need for accurate, superb sounding music reproduction. The Airmotiv S12 delivers slightly less low bass extension than the S15, but is slightly more compact, and is ideal for smaller rooms.
Driver Complement
Active driver: 12” downward firing heavy duty long throw subwoofer with cast aluminum frame, 2-1/2” copper voice coil, non-pressed paper cone reinforced with aramid fibers, tough SBR rubber surround, vented pole piece, and forced air cooling.
Passive radiator: 12” front firing passive radiator with cast aluminum frame, non-pressed paper cone reinforced with aramid fibers, and tough SBR rubber surround.
Cabinet
Heavily braced acoustically inert MDF cabinet with removable sculpted fabric-covered grill. The front bezel is finished in several coats of satin finish black lacquer; the sides and rear are covered in tough attractive textured vinyl.
Electronics
Amplifier type: Audiophile quality Class A/B amplifier.
Amplifier power: 500 Watts RMS.
Protection: advanced multi-stage low-distortion limiter.
Frequency response: 24 Hz - 200 Hz (+/- 3 dB).
Inputs: Single XLR balanced input; summed left and right
RCA unbalanced inputs.
Controls: Crossover, Phase, Volume, LF Boost.
AC power: User selectable line voltage;
115 VAC/60 Hz (6.3A Fuse); 230 VAC/50 Hz (3A Fuse).
Mechanical
Dimensions: 17-3/8” high x 15-3/4” wide x 16-7/8” deep.
Weight: 66.2 pounds.
Feet: Permanently attached anti-slip rubber feet
.
Page 12
Airmotiv S10
A
AIRMOTIV SUBWOOFERS
The Airmotiv S10 is the ideal way to extend the bass response of your audio system to cover the last few critical octaves of bass with authority and finesse. The Airmotiv S10 can deliver the raw power you need to add that final touch of realism to a movie, while still offering the low distortion and precise control you need for accurate, superb sounding music reproduction. The Airmotiv S10 delivers slightly less low bass output than the S12, but its smaller footprint makes it the ideal solution for installations where space is at a premium.
Driver Complement
Active driver: 10” downward firing heavy duty long throw subwoofer with cast aluminum frame, 2” copper voice coil, non-pressed paper cone reinforced with aramid fibers, tough
SBR rubber surround, vented pole piece, and forced air cooling.
Passive radiator: 10” front firing passive radiator with cast aluminum frame, non-pressed paper cone reinforced with aramid fibers, and tough SBR rubber surround.
Cabinet
Heavily braced acoustically inert MDF cabinet with removable sculpted fabric-covered grill. The front bezel is finished in several coats of satin finish black lacquer; the sides and rear are covered in tough attractive textured vinyl.
Electronics
Amplifier type: Audiophile quality Class A/B amplifier.
Amplifier power: 350 Watts RMS.
Protection: advanced multi-stage low-distortion limiter.
Frequency response: 26 Hz - 200 Hz (+/- 3 dB).
Inputs: Single XLR balanced input; summed left and right RCA unbalanced inputs.Controls: Crossover, Phase, Volume, LF
Boost.
AC power: User selectable line voltage;
115 VAC/60 Hz (4A Fuse); 230 VAC/50 Hz (2A Fuse).
Mechanical
Dimensions: 16-1/8” high x 14” wide x 15-7/8” deep.
Weight: 52.1 pounds.
Feet: Permanently attached anti-slip rubber feet
.
Page 13
AIRMOTIV SUBWOOFERS
Subwoofer Placement and Configuration
The best location for your subwoofer will depend on a lot of things - including the acoustics of your room, the characteristics of your main speakers, and practical considerations like where you have room for it. (Whole books have been written about the subject - and even experts often disagree.) The important thing is to find a location that delivers the sound you want, and fits with your room decor.
Some frequently chosen locations include: in the front between your main front speakers, in a front or rear corner, or in the center of a side wall or rear wall. Each has advantages and disadvantages, and each may or may not work well in your particular system.
One way of choosing a good location is sometimes humorously referred to as the “subwoofer crawl”. To use this method, you connect your subwoofer temporarily to your audio system, place the sub in your normal listening position, where you would normally sit, and play music through it with plenty of bass. You then crawl around on the floor, stopping and listening at each location where you’re considering putting your sub. Once you find the spot where the bass sounds the best and cleanest, you switch places with the subwoofer, placing it in the location where the bass sounded the best. This often turns out to be a good location for your sub.
How you configure your Airmotiv subwoofer will depend on the type of system you have.
Note: Your Airmotiv subwoofer contains a powerful Class A/B amplifier. The heat sinks for this amplifier are attached to the back of the Airmotiv sub, in the center of the amp plate.
IT IS NORMAL FOR THE HEAT SINKS TO GET QUITE WARM when your Airmotiv subwoofer is played loudly for extended periods of time.
WARNING: YOU MUST ALLOW SEVERAL INCHES OF CLEARANCE BETWEEN THE REAR PLATE
OF YOUR AIRMOTIV SUBWOOFER AND THE NEAREST WALL OR OTHER SURFACE TO ALLOW
AIR FLOW AROUND THE HEAT SINK FINS TO ENSURE ADEQUATE COOLING! DO NOT PUSH THE
REAR PANEL OF YOUR AIRMOTIV SUB TIGHT AGAINST A WALL! DO NOT PUSH THE REAR OF
THE UNIT AGAINST DRAPES OR SOFT FURNITURE THAT WILL BLOCK AIR FLOW TO THE REAR
HEAT SINK FINS! (Your Airmotiv sub includes internal safety protection against overheating, but operating it for excessive periods of time without adequate cooling will impair proper operation and shorten component life.)
Configuring your Airmotiv Sub to Work with an AVR or Surround Sound Pre/Pro
Setting your Airmotiv sub to work with an AVR or pre/pro that has its own bass management is quite simple (this will work for most systems that have a subwoofer output).
- Connect the subwoofer or LFE output on your pre/pro or receiver to the one of the inputs on your Airmotiv sub.
- Set the Crossover Control on the Airmotiv sub fully clockwise (to 150 Hz).
- Set the Volume Control on the Airmotiv sub to a setting where the level of the low bass seems about right by ear.
Page 14
AIRMOTIV SUBWOOFERS
- Adjust the Phase Control to the setting where you hear the MOST bass in the frequency range where the sub overlaps with your main speakers.
- Use the adjustments on your receiver or pre/pro to dial your settings in perfectly, or run the automatic room correction and let it do all the work for you. The procedure will be slightly different on each system because each piece of equipment offers different manual controls and different automatic options.
If your AVR or pre/pro has a full range subwoofer output (but not bass management), then there’s one additional step.
- AFTER you’ve set the Phase Control for the most bass, go back and adjust the Volume and
Crossover Controls for the best sound. The Crossover Control controls the overlap between your subwoofer and your main speakers; you want to set it so that your sub blends smoothly with your main speakers, without a bump or dip where they overlap, and without a sharp transition from one to the other. The Volume Control is used to set the relative level between your sub and main speakers. A good rule of thumb is that the bass should sound solid, but you should not hear the sub as a distinct separate sound source; try turning the Volume Control up until you barely notice the sub, then back down a tiny bit.
- Finally, after you’ve adjusted your Airmotiv sub for the flattest response, you can use the LF boost control to fine tune the very low frequency response to your personal preference.
Note: The way your main speakers and sub blend together will sound slightly different at different locations in the room. These adjustments should be made by listening at your normal listening location. If your equipment is located across the room, walk back to your favorite chair and listen to the results from there each time you make an adjustment.
Note: After you’ve configured everything on your pre/pro, or used your automatic room correction to do so, you should AVOID changing the Crossover and Phase Control settings on your Airmotiv sub as this will change the way it sounds. However, you may use the Volume
Control to increase or reduce the overall amount of bass to suit your taste, and the LF Boost control to fine tune the amount of low bass.
Configuring your Airmotiv Sub Manually
If you’re connecting your Airmotiv sub to a stereo system that doesn’t have a subwoofer output, you’ll be using the controls on the Airmotiv sub to make it fit perfectly with your main speakers.
- First you’ll need to take a set of main outputs and connect them to BOTH inputs on your
AirmotivX subwoofer. It doesn’t matter which channel you connect to which input since they’re summed together. If you only have one set of main outputs, you can use a pair of splitter cables to send a copy of those signals to your Airmotiv sub.
- Start with the Volume Control all the way down; with the Phase Control set to 0 degrees, and with the Crossover Control set to the far right - to 150 Hz.
- Now, play some music with plenty of bass, and that you are familiar with.
Page 15
AIRMOTIV SUBWOOFERS
- Turn the Volume Control up until the amount of bass sounds more or less correct.
- Use the Phase Control to adjust for the MOST bass in the frequency range where your sub and main speakers overlap.
- Fine tune the setting on the Volume Control so that the amount of low bass and middle frequencies seem about right in proportion to each other. At this point you’ll probably have a bump in the frequency response where the sub and your main speakers overlap.
- Now, turn the Crossover Control to the left to reduce the overlap between your sub and main speakers until everything sounds best. (You’re lowering the crossover frequency to eliminate the overlap between the sub and your main speakers.)
- If necessary, you can adjust the Volume Control one final time to get things just right.
- Finally, after you’ve adjusted your Airmotiv subwoofer for the flattest possible response, use the
LF Boost control to fine tune the low bass response to your room and personal preference.
Note: The way your main speakers and sub blend together will sound slightly different at different locations in the room. These adjustments should be made by listening at your normal listening location... If your equipment is located across the room, walk back to your favorite chair and listen to the results from there each time you make an adjustment.
Note: After you’ve configured everything on your pre/pro, or used your automatic room correction to do so, you should AVOID changing the Crossover and Phase Control settings on your Airmotiv sub as this will change the way it sounds. However, you may use the Volume
Control to increase or reduce the overall amount of bass to suit your taste, and the LF Boost control to fine tune the bass balance.
Page 16
AIRMOTIV SUBWOOFERS
Connections
Although the Airmotiv subwoofers have no special connection requirements, the following suggestions may be helpful:
• If your source component offers both options, a balanced connection is preferred because balanced connections are less likely to pick up noise, especially with long interconnects, or when cables are run near power cables.
• Always use high-quality interconnects between your subwoofer and your source equipment.
• Keep interconnects as short as possible, and avoid running interconnects next to power cables whenever possible.
• Emotiva offers high quality interconnect cables at reasonable prices
(you will find them on our website at www.emotiva.com)
Page 17
AIRMOTIV SUBWOOFERS
Care and Maintenance
Periodic Maintenance
Your Airmotiv subwoofer requires no periodic maintenance or calibration.
Cleaning the Cabinet and Baffle
• The cabinet of your Airmotiv subwoofer should normally be cleaned with a rag dampened with plain water. DO NOT spray water directly onto or into the speaker and DO NOT use abrasive or chemical cleaners. Gently dry the surface with a clean soft rag after cleaning.
• If necessary, use a mild detergent, wipe the surface with a rag dampened with plain water afterwards to rinse it, and then gently dry the surface with a clean soft rag.
• If something nasty does get on the sides or top of your Airmotiv subwoofer, use a rag dampened with a weak solution of dish detergent or other mild cleaning liquid, followed by a rag dampened with plain water, and then dry with a clean rag.
Cleaning the Grill Cloth
• If necessary, the grill cloth may be carefully vacuumed to remove dust or hair.
• Animal hair may be removed by using a “tape” type lint remover or soft brush. Avoid using brushes with stiff bristles that may pull or damage the grill cloth.
Note: DO NOT use any sort of liquid or wet cloth on the woofer cone or passive radiator.
Page 18
AIRMOTIV SUBWOOFERS
Emotiva Audio Corporation Five-Year Limited Warranty
What does this warranty cover?
Emotiva Audio Corporation (Emotiva) warrants its products against defects in materials and workmanship.
This warranty, and all rights provided hereunder, is limited to the original owner. In the event the original owner transfers ownership of the Product after the first two years of ownership, but prior to the expiration of the applicable term described below, this Warranty shall terminate at the end of the original applicable term.
This Warranty only applies to Products purchased directly from Emotiva or any of its Authorized Dealers or
International Distributors.
Emotiva warrants any replacement product or part furnished hereunder against defects in materials and workmanship for the longer of the following: (i) the amount of time remaining under the original warranty, or
(ii) 120 days from your receipt of the repaired or replaced product. The duration described in this paragraph is hereinafter referred to as the “Term”.
TO THE FULLEST EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES RELATED TO THE ORIGINAL
PRODUCT AND ANY REPLACEMENT PRODUCT OR PARTS (INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE EXPRESSLY LIMITED TO THE TERM
OF THIS LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
The original owner must make a claim within the Term of the Warranty. A claim shall not be valid (and
Emotiva has no obligation related to the claim) if it is not made within the Term and if it is not made in strict compliance with the requirements of the “How do you get service?” section.
How long does this coverage last?
This warranty commences on the date of retail purchase by the original retail purchaser and runs for a period of five years thereafter, with the exception of accessories, cables, Big Ego, Little Ego, remote controls, and the
ERC-3 CD transport mechanism*. This warranty may be transferred once by the original owner during the initial two years of ownership, and is non-transferable thereafter. Emotiva warrants any replacement product or part furnished hereunder against defects in materials and workmanship for the longer of the following: (i) the amount of time remaining under the original warranty, or (ii) 120 days from your receipt of the repaired or replaced product. The duration described in this paragraph is hereinafter referred to as the “Term”.
*Accessories, cables, Big Ego, Little Ego, and remote controls have a one-year warranty to the original owner.
The CD transport mechanism on the ERC-3 has a two-year warranty to the original owner.
What will Emotiva do?
Emotiva will, at its option, either: (i) repair the product, or (ii) replace the product with a new consumer product which is identical or reasonably equivalent (in Warrantor’s sole discretion) to the product. In the event Warrantor, in its sole discretion, is unable to replace or repair the Product or it is not commercially practicable to do so, then: (i) if the claim was submitted during the first 365 days of the Term, Warrantor shall refund to you the purchase price that you paid for the Product; and (ii) if the claim was submitted after the first 365 days of the Term, Emotiva shall issue you a credit equal to the purchase price that you paid for the product. The credit may only be used for the purchase of merchandise from Emotiva, and cannot be used for freight charges.
When a Product or part is repaired or replaced, any replacement item becomes your property and the replaced item becomes Emotiva’s property. When a refund or credit is given, the Product for which the refund or credit is provided must be returned to Emotiva and becomes Emotiva’s property.
Page 19
AIRMOTIV SUBWOOFERS
What is not covered by this warranty?
This warranty does not apply: (i) to damage caused by use with products not manufactured by Emotiva, where the non-Emotiva product is the cause of the damage; (ii) to damage caused by service or maintenance performed by anyone who is not a representative of Emotiva; (iii) to damage caused by accident, abuse, misuse, flood, fire, earthquake or other external causes; (iv) to a product or part that has been modified after its retail purchase, where the modification caused or contributed to the damage; (v) to consumable parts, such as batteries or failure of or damage to the Product caused by batteries; (vi) if any
Emotiva serial number has been removed or defaced on the product; (vii) glass or plastic panels, cabinetry, trim or other appearance items; (viii) cosmetic wear or damage to remote controls by user.
EMOTIVA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM
OR RELATED TO ANY DEFECTS IN OR DAMAGES TO ITS PRODUCTS. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
How do you get service?
In order to make a claim under the Warranty, you must:
1. Call or e-mail a customer service representative at 1-877-EMO-TECH (1-877-366-8324) or [email protected]. You must provide a description of your problem, the serial number of the Product for which the warranty claim is being made, and the original purchase date.
2. Then, you will be provided with a warranty service authorization number (“WS”).
3. Next, you must ship the Product to the following address, with the WS written in large, bold numbers on the outside of the box, and with the letters “WS” written before the number, for example: WS1234.
Parcels arriving without a WS number on the outside of the box will be refused. The customer pays for the shipping to Warrantor. Warrantor pays for the shipping back to the customer within the continental United
States only. Customer is responsible for shipping charges on all other warranty claims.
Emotiva Audio Corporation
Attn: Repair Department
139 Southeast Parkway Court
Franklin,
Units will be refused by Emotiva for the following:
Product was sent without the WS#
Product was sent with inadequate packaging.
Product was damaged in transit.
Product was shipped collect for shipping charges.
How does state law apply?
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
What if my product is damaged on the way to you?
Emotiva is not liable for damages that may incur while an item is in transport to us. Please purchase insurance when you ship your item. If your Product was not adequately packaged, we will refuse receipt and the damaged package will be returned to you at your cost. If you do not have the original Emotiva
Audio packaging, please check with our sales department to purchase replacement-shipping cartons.
Page 20
AIRMOTIV SUBWOOFERS
How does the Warranty and service apply to international orders?
The Product Warranty is only valid in the country where the Emotiva product was originally shipped via an authorized dealer, distributor, or direct from the Emotiva factory. The Warranty is subject to change at any time depending on the laws and regulations within your specific country. Please check with your distributor for a complete understanding of the warranty in your county.
If you purchased your Emotiva Product outside of the USA and wish to have it serviced at the factory, all freight charges are your responsibility. If you do not have an authorized distributor or repair center in your country, your Product must come back to the Emotiva USA factory for warranty service.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
What if my product is damaged on the way to you?
Emotiva is not liable for damages that may incur while an item is in transport to us. Please purchase insurance when you ship your item. If your Product was not adequately packaged, we will refuse receipt and the damaged package will be returned to you at your cost. If you do not have the original Emotiva
Audio packaging, please check with our sales department to purchase replacement-shipping cartons.
How does the Warranty and service apply to international orders?
The Product Warranty is only valid in the country where the Emotiva product was originally shipped via an authorized dealer, distributor, or direct from the Emotiva factory. The Warranty is subject to change at any time depending on the laws and regulations within your specific country. Please check with your distributor for a complete understanding of the warranty in your county.
If you purchased your Emotiva Product outside of the USA and wish to have it serviced at the factory, all freight charges are your responsibility. If you do not have an authorized distributor or repair center in your country, your Product must come back to the Emotiva USA factory for warranty service.
Page 21
AIRMOTIV SUBWOOFERS
Accessories
Using high-quality audio interconnects will ensure that you get the best sound quality and maximum reliability from your Emotiva Airmotiv Subwoofer. Emotiva Audio offers high-quality speaker cables and audio interconnects that feature solid engineering, premium build quality, excellent performance, and reasonable cost.
You will find both on our website at www.emotiva.com.
Notes
All information contained in this manual is accurate to the best of our knowledge at the time of publication. In keeping with our policy of ongoing product improvement, we reserve the right to make changes to the design and features of our products without prior notice.
User Manual Revision 1.0 October 2016
Page 22
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement