Panasonic Video Surveillance IT Specification

Panasonic Video Surveillance IT Specification
Panasonic
Video Surveillance
IT Specification
2009/May/20
Version 1.00
Panasonic Corporation
System Solutions Company
With regard to the contents of this document.
- It is prohibited to reproduce part or all in this document.
- Panasonic reserves the right, at its discretion, to change, modify, add, or remove portions of the
contents of this document at any time.
Change History
Date
2009/May/20
Version
1.00
Description
First release
Contents
1.
2.
3.
4.
5.
General Description ............................................................................................................................................................................................................. 5
Trademarks and registered trademarks............................................................................................................................................................................... 5
Limitation of liability .............................................................................................................................................................................................................. 5
Disclaimer of warranty.......................................................................................................................................................................................................... 5
Network Camera and Video Encoder Network Resources ................................................................................................................................................. 8
5.1. Specification.................................................................................................................................................................................................................. 8
5.2. Port and Protocol ........................................................................................................................................................................................................ 10
6. Video Recorder Network Resources.................................................................................................................................................................................. 11
6.1. Specification................................................................................................................................................................................................................ 11
6.2. Port and Protocol ........................................................................................................................................................................................................ 12
7. PC Client Software (WV-ASM100, WV-ASM10), Network Video Decoder (WJ-GXD400) ............................................................................................... 13
7.1. Specification................................................................................................................................................................................................................ 13
7.2. Port and Protocol ........................................................................................................................................................................................................ 14
1. General Description
This document shows the specification concerning the IT resource of Panasonic Video Surveillance devices.
Please design the network referring to the description of this document when you connect the devices with the network.
2. Trademarks and registered trademarks
Microsoft, Windows and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Other names of companies and product contained in these operating instructions may be trademarks or registered
trademarks of their respective owners.
3. Limitation of liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS
PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
4. Disclaimer of warranty
IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR
REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT
NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL
OR EXEMPLARY, ARISING OUT OF OR RELATING TO THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S);
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION
OF THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE CORRESPONDING PRODUCT (S) BY THE USER;
(4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM
COMBINED BY THE DEVICES OF THIRD PARTY;
(5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT,
DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCECAMERA’S PICTURE, INCLUDING SAVED DATA,
FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN SURVEILLANCE.
Used Ports in i-Pro System (Factory Default)
i-Pro Camera
80
Manual
Auto
(Proxy Server)
CGI and HTTP (JPEG)
Fixed
TCP
UDP
80
H.264/MPEG-4(video)
H.264/MPEG-4(audio)
WV-ASM100
[Unicast (Auto)]
12600 to 12700 even (WV-ASM100/ASM10), 1024-50000(WJ-GXD400)
[Unicast (Manual)] or [Multicast]
Auto Setting depend on the manual setting in each camera’s setup.
(Unicast Default : Video-32004, Audio-33004
Multicast Default: Video-37004)
i-Pro Camera
8181
Panasonic Alarm (Command Alarm)
Panasonic Alarm (Site Alarm)
80
H.264/MPEG-4(video/audio)
(Proxy Server)
HTTP (JPEG)
H.264/MPEG-4(video)
(Proxy Server)
12600 to 12700 even (WV-ASM100/ASM10)
1024-50000 (WJ-GXD400)
CGI and HTTP (JPEG)
WJ-GXD400
WV-ASM10
80
80
Panasonic Alarm
H.264/MPEG-4(audio)
1818
FTP (Active/Passive)
NTP
FTP
123
(Port20 in Active mode,
Auto in Passive mode,
WV-ASM100 only)
External Server
21
FTP
123
FTP
1818
80
21
7001
WV-ASM100only
20
20
161
161
25
i-Pro Encoder
110
21
20
53
FTP
SNMP
161
SMTP
[Unicast (Auto)]
Auto Setting.
[Unicast (Manual)] or [Multicast]
Auto Setting depend on the manual setting in each camera’s setup.
(Default : Video-32004, Audio-33004)
WJ-GXD400:80
WV-ASM10:10101
WV-CU950
POP
80
10101
External
Client
NVR (WJ-ND400, WJ-ND300A, WJ-ND200)
DNS
NTP
Maintenance
67
use only
68
DHCP
123
68
123
NTP Server
Used Ports in Analog System (Factory Default)
Manual
Auto
Fixed
TCP
UDP
Analog Camera
DVR
(WJ-HD316A,
WJ-HD309A)
(Proxy Server)
80
20
21
CGI and HTTP (Proprietary)
WV-ASM100
80
FTP
(Port20 in Active mode, Auto in Passive mode, ASM100 only)
FTP (Active/Passive mode)
WV-ASM10
Panasonic Alarm
FTP
21
1818
External Server
FTP
20
161
SNMP
SMTP
POP
DNS
68
DHCP
NTP
123
7001
161
WV-ASM100only
10101
WV-ASM10only
25
110
WV-CU950
53
67
123
NTP Server
External
Client
5. Network Camera and Video Encoder Network Resources
5.1.
Specification
WV-NP244
WV-NP1000
WV-NP1004
WV-NF284
User Management
Network IF
PoE(IEEE 802.3af)
Image Distribution
yes
-
yes
-
JPEG
1280x960
960x720
-
-
Image Resolution
-
Max Bit Rate/Client
( H.264/MPEG-4)
Total Bit Rate
Audio
Audio Mode
-
WV-NS202A
WV-NW484S
WV-NS950
WV-NS954
WV-NW960
WV-NW964
WV-NF302
WV-NP304
User authentication (ID 1~32digit, PW 4~32digit)
User Level 3Levels
Host authentication (IP address)
Host Level 3Levels
10BASE-T/100BASE-TX (RJ-45)
yes
yes
yes
yes
JPEG Unicast
H.264/MPEG-4 Unicast/Multicast (TTL default:16/set of 1~255)
JPEG QVGA
JPEG VGA
JPEG 1280x960
-
-
MPEG-4 QVGA
MPEG-4 VGA
-
-
WV-NP502
(Preliminary)
WV-NW502S
(Preliminary)
yes
yes
JPEG 2048x1536
H.264 QVGA
H.264 VGA
H.264 1280x960
Constant Bit Rate Mode : 64/128/256/384*1/512/768*1/1024/1536/2048/3072/4096/8192*1*2 kbps
Frame Rate Priority Mode : 4,096 / 8,192*2 kbps/Unlimited*3
*1: WV-NP502, WV-NW502S only
*2 : H.264 mode only
*3 : Up to16Mbps( WV-NP502, WV-NW502S), Up to 8Mbps(Other models), WV-NP1000 series not support Frame Rate Priority Mode
64/128/256/384*1/512/768*1/1024/2048/4096/8192*1 kbps/Unlimited*2
*1: WV-NP502, WV-NW502S only
*2 : Up to16Mbps( WV-NP502, WV-NW502S), Up to 8Mbps(Other model)
** WV-NP1000series have 10Mbps mode
Audio Compression G.726(ADPCM) 16kbps/32kbps ( WV-NP1000series 32kbps/64kbps)
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
In
In
In
interactive
(Half/Full)
interactive
(Half/Full)
interactive
(Half/Full)
interactive
(Half/Full)
interactive
(Half/Full)
interactive
(Half/Full)
interactive
(Half/Full)
WJ-NT304
User Management
Network IF
PoE(IEEE 802.3af)
Image Distribution
Image Resolution
and Bandwidth
Maximum Band Width
Total Bit Rate Control
Max. Bit Rate/ Client
(MPEG-4)
Audio Compression
Audio Mode
WJ-NT314
User authentication (ID 1~32digit, PW 4~32digit)
User Level 3Levels
Host authentication (IP address)
Host Level 3Levels
10BASE-T/100BASE-TX (RJ-45)
JPEG Unicast
MPEG-4 Unicast/Multicast (TTL default:16/set of 1~255)
JPEG QVGA
JPEG VGA
MPEG-4 QVGA
MPEG-4 VGA
Total 32Mbps
64/128/256/512/1024/2048/4096/8192/16384/Unlimited
64/128/256/512/1024/1536/2048/3072/4096/6144kbps
G.726(ADPCM) 32kbps/16kbps
Bi-directional between PC and WJ-NT314. CH1 only.
In/Out/Interactive(Half Duplex)
In/Out/Interactive(Half Duplex)
5.2.
Port and Protocol
Server Port and Protocol
Protocol
TCP/UDP
HTTP
TCP
RTP
UDP
Local port
80
Auto
Foreign port
Auto
*1
Purpose
Distribute JPEG image to network
Distribute MPEG-4 image to network
Note
*1: Depends on camera setting
[Unicast (Auto)]
Foreign port is Auto.
(Port range :1024-50000)
[Unicast (Manual)] or [Multicast]
Depend on the manual setting.
(Unicast Default :
Video-32004, Audio-33004
Multicast Default: Video-37004)
SNMP
TCP
UDP
TCP
161
8181
Auto
Auto
FTP server
TCP
21
20
Auto
Local port
Auto
Auto
Auto
Foreign port
1818
123
21
20 *3
161
25
53
67
Client Port and Protocol
Protocol
TCP/UDP
TCP
TCP
NTP client
UDP
FTP client
TCP
SNMP
SMTP
DNS/DDNS
DHCP
UDP
TCP
TCP/UDP
UDP
Auto
Auto
Auto
Auto
SNMP agent (supported get only)
Panasonic Alarm received from
another camera
FTP data and control
*3: Active mode only
Purpose
Panasonic Alarm send to Client PC
Time adjust with NTP server
FTP data and control
*3: Active mode only
SNMP agent (supported get only)
Mail notification on alarm information
255.255.255.255 UDP Broadcast
for Maintenance use only
Note
6. Video Recorder Network Resources
6.1.
Specification
WJ-ND200 series
User Management
Netowork IF
Image Distribution
Image Resolution
Band Width Control
Audio Recording
RAID 1
RAID 5
RAID 6
Data encryption
Watermark
WJ-ND300A series
WJ-ND400 series
WJ-HD309A series
WJ-HD316A series
User authentication (ID 1~32digit, PW 4~32digit)
User Level 3Levels
Host authentication (IP address)
Host Level 3Levels
10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
JPEG Unicast
Proprietary format Unicast
MPEG-4 Unicast
JPEG QVGA
JPEG VGA
JPEG 960x780
JPEG 1920x960
MPEG-4 QVGA
MPEG-4 VGA
32k/64k/128k/256k/512k/1024k/2M/45M/10M/(bps)/Unlimited(WJ-ND300/
32kbps~Unlimited
ND400 Series is Client Port)
G.726(ADPCM) 32kbps
G.726(ADPCM) 32kbps
PCM 11.025kHz, 16bit (Monaural)
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
6.2.
Port and Protocol
Server Port and Protocol
Protocol
TCP/UDP
HTTP
TCP
RTP
UDP
TCP
TCP
NTP server
UDP
FTP server
TCP
SNMP
UDP
Client Port and Protocol
Protocol
TCP/UDP
HTTP
TCP
RTP
UDP
Local port
80
Auto
1818
123
21
20 *3
161
Foreign port
Auto
*2
Auto
Auto
Auto
Auto
Purpose
Distribute JPEG/Droplet image to network
Distribute MPEG-4 image to network
Panasonic Alarm receive from camera
Serve time adjust with NTP client
FTP data and control
*3: Active mode only
SNMP agent (supported get only)
Local port
Auto
*1
Foreign port
80
Auto
Purpose
Get JPEG image from camera
Get MPEG-4 image from camera
Note
Port range :1024-50000
Note
*1: Depends on camera setting
[Unicast (Auto)]
Foreign port is auto.
(Port range :1024-50000)
[Unicast (Manual)] or [Multicast]
Depend on the manual setting.
(Unicast Default :
Video-32004, Audio-33004
Multicast Default: Video-37004)
TCP
NTP client
FTP client
TCP
UDP
TCP
Auto
Auto
Auto
SNMP
SMTP
POP
DNS/DDNS
DHCP
HTTP proxy
UDP
TCP
TCP
TCP/UDP
UDP
TCP
Auto
Auto
Auto
Auto
Auto
Auto
1818
123
21
20 *3
161
25
110
53
67
80
Panasonic Alarm send to Client PC
Time adjust with NTP server
FTP data and control
*3: Active mode only
SNMP agent (supported get only)
Mail notification on alarm information
for POP before SMTP
255.255.255.255 UDP Broadcast
7. PC Client Software (WV-ASM100, WV-ASM10), Network Video Decoder (WJ-GXD400)
7.1.
Specification
WV-ASM100
OS
GUI Language
Database
Required PC
User Management
Partitioning
WV-ASM10
Windows XP professional SP2 32bit edition Windows XP Home SP2 32bit edition
Windows Vista Business 32bit edition
The language of the OS must be same as selected GUI language.
English, French, Italian, Spanish, German, Russian, Chinese
SQL Server 2005 Express Edition SP1
CPU: Intel Core 2 Duo 2.66GHz or faster
RAM: 1GB (for Windows XP) or more
2GB (for Windows Vista) or more
VRAM: 128MB or more
Microsoft DirectX 9.0c or later
User authentication (ID 4~14digit, PW 4~8digit)
User Level 5Levels
Password time limit OFF/31/92/184/366 days
Auto login ON/OFF
Hardware key (USB dongle)
User - Camera (View only, View & Control, No Access) in conjunction with recorder’s user management
WJ-GXD400
User Management
Network IF
PoE(IEEE 802.3af)
Supported
Image
Format
Supported
Image
Resolution
Audio
Audio Mode
User authentication (ID 1~32digit, PW 4~32digit)
User Level 2Levels
Host authentication (IP address)
Host Level 2Levels
100BASE-TX/1000BASE-T (RJ-45)
JPEG Unicast, MPEG-4 Unicast/Multicast (Multi-decoding)
1280x960, 640x,480, 320x240
768x576(trimmed to 640x480, PAL model only)
Audio Compression G.726(ADPCM) 32kbps/16kbps (MPEG-4 only)
Out
7.2.
Port and Protocol
Server Port and Protocol
Protocol
TCP/UDP
TCP
TCP
TCP
TCP
7001
Auto
TCP
TCP
80/10101
Auto
Purpose
Panasonic Alarm receive from camera or
recorder
Connection by Universal Controller
WJ-CU950
Connection by External client
Local port
Auto
*1
Foreign port
80
Auto
Purpose
Get JPEG image from camera or recorder
Get MPEG-4 image from camera
Client Port and Protocol
Protocol
TCP/UDP
HTTP
TCP
RTP
UDP
Local port
1818
Foreign port
Auto
RTP
UDP
*2
Auto
Get MPEG-4 image from recorder
FTP client
TCP
Auto
21
20 *3
FTP data and control
*3: Active mode only
Note
WV-ASM100/WJ-GXD400 only
Note
WV-ASM100 only
WV-ASM10 Default : 10101
WJ-GXD400 Default : 80
*1: Depends on camera setting
[Unicast (Auto)]
Foreign port is auto.
12600 to 12700 even
(WV-ASM100/ASM10),
1024-50000(WJ-GXD400)
[Unicast (Manual)] or [Multicast]
Depend on the manual setting.
(Unicast Default :
Video-32004, Audio-33004
Multicast Default: Video-37004)
*2 :
[Unicast (Auto)]
Foreign port is auto.
12600 to 12700 even
(WV-ASM100/ASM10),
1024-50000(WJ-GXD400)
WV-ASM100 only
(c)Panasonic Corporation 2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement