1. Power on your Wii console and press the A Button on the Wii

1. Power on your Wii console and press the A Button on the Wii
1.
2.
3.
Power on your Wii console and press the A Button on the Wii Remote to reach
the Wii main menu. Use the Wii Remote to select the "Wii" button.
Select "Wii Settings" to access the "Wii System Settings" menu.
Using the arrow on the right side of the screen, scroll to page two and select
"Internet."
4.
5.
Select "Connection Settings."
Select "Connection 1: None."
If you do not have an empty connection slot, you will need to clear a slot.
6.
Click on "Wireless Connection," then click "Search for an Access Point."
7.
Select "OK," "Save Settings," and then "Yes."
The Wii console will run a connection test with your wireless network. When the test is
completed, you should see the following screen:
As long as you see "The connection test was successful," the "Wii Support Code" does not
matter and can be ignored.
If the connection test succeeds, then your Wii is now connected to the internet.
If the connection test was not successful, you will receive an error code.
Error Code 51330 or 52130: This means the security code you entered into the Wii is not the
same one your router is set to. Look in your router's settings and try again.
All other error codes: consult your manual.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement