View Manual in PDF Format
www.proform.com
Model No. PFTL49614.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to www.proformservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER’S MANUAL
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
HOW TO USE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
MAINTENANCE AND TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the warning
decals. If a decal is missing or illegible, call
the telephone number on the front cover of
this manual and request a free replacement
decal. Apply the decal in the location shown.
Note: The decals may not be shown at actual
size.
305284
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read all
important precautions and instructions in this manual and all warnings on your treadmill before using
your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by
or through the use of this product.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
12.Plug the power cord into a surge suppressor
(not included), and plug the surge suppressor into an appropriate outlet (see page 17).
To avoid overloading the circuit, do not plug
other electrical devices, except for low-power
devices such as cell phone chargers, into
the surge suppressor or into an outlet on the
same circuit.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
3. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
13.Use only a surge suppressor that meets all of
the specifications described on page 17. To
purchase a surge suppressor, see your local
PROFORM dealer, call the telephone number
on the front cover of this manual, or see your
local electronics store.
4. Use the treadmill only as described.
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
14.Failure to use a properly functioning surge
suppressor could result in damage to the
control system of the treadmill. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.
6. Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
15.Keep the power cord and the surge suppressor away from heated surfaces.
7. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
16.Never move the walking belt while the power
is turned off. Do not operate the treadmill
if the power cord or plug is damaged, or if
the treadmill is not working properly. (See
MAINTENANCE AND TROUBLESHOOTING
on page 26 if the treadmill is not working
properly.)
8. Keep children under age 12 and pets away
from the treadmill at all times.
9. The treadmill should be used only by persons weighing 300 lbs. (136 kg) or less.
17.Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 19).
Always wear the clip while using the treadmill.
10.Never allow more than one person on the
treadmill at a time.
11.Wear appropriate exercise clothes when
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
18.Always stand on the foot rails when starting
or stopping the walking belt. Always hold the
handrails while using the treadmill.
19.Keep fingers, hair, and clothing away from
the moving walking belt.
3
25.Never insert any object into any opening on
the treadmill.
20.The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
26.Inspect and properly tighten all parts of the
treadmill regularly.
21.The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
27.
22.Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and press the power switch
into the off position when the treadmill is not
in use. (See the drawing on page 7 for the
location of the power switch.)
DANGER:
Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.
28.This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
23.Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 9, and HOW TO FOLD
AND MOVE THE TREADMILL on page 25.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
29.Over exercising may result in serious injury
or death. If you feel faint, if you become short
of breath, or if you experience pain while
exercising, stop immediately and cool down.
24.When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
SAVE THESE INSTRUCTIONS
4
5
STANDARD SERVICE PLANS
all
6
BEFORE YOU BEGIN
Thank you for selecting the revolutionary
PROFORM® PERFORMANCE SPORT treadmill. The
PERFORMANCE SPORT treadmill offers an impressive selection of features designed to make your
workouts at home more enjoyable and effective. And
when you’re not exercising, the unique treadmill can
be folded up, requiring less than half the floor space of
other treadmills.
reading this manual, please see the front cover of this
manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after
Console
Length: 6 ft. (183 cm)
Width: 2 ft. 11 in. (89 cm)
Tray
Heart Rate Monitor
Handrail
Key/Clip
Upright
Power Switch
Walking Belt
Foot Rail
Power Cord
Platform Cushion
Idler Roller
Adjustment Bolts
7
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is
pre-attached. Extra parts may be included.
1/4" Star
Washer (12)–8
5/16" Star
Washer (13)–6
#8 x 3/4" Screw
(1)–6
5/16" x 1"
Screw (4)–6
3/8" Star
Washer (11)–6
Base Foot
Spacer (94)–2
#10 x 3/4" Screw
(2)–4
#8 x 1" Tek Screw
(5)–4
3/8" x 1 1/2" Screw (14)–2
3/8" x 4 1/4" Screw (7)–4
8
3/8" Nut (10)–5
1/4" x 1/2"
Screw (9)–4
3/8" x 2" Bolt (8)–5
ASSEMBLY
• T
o hire an authorized service technician to assemble your exercise equipment, call 1-800-445-2480.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• Assembly requires two persons.
• To identify small parts, see page 8.
• P
lace all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• Assembly requires the following tools:
the included hex key
• After shipping, there may be an oily substance on
the exterior of the treadmill. This is normal. If there
is an oily substance on the treadmill, wipe it off
with a soft cloth and a mild, non-abrasive cleaner.
one adjustable wrench
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
1.
Go to www.proformservice.com/
registration on your computer and register
your product.
• activates your warranty
• allows us to notify you of upgrades and offers
1
• s aves you time if you ever need to contact
Customer Care
Note: If you do not have Internet access, call
Customer Care (see the front cover of this
manual) to register your product.
9
2.
Make sure that the power cord is unplugged.
2
Hole
87
With the help of a second person, carefully tip the
treadmill onto its left side. Partially fold the Frame
(55) so that the treadmill is more stable; do not
fully fold the Frame yet.
If there is a shipping tie securing the Upright Wire
(87) to the Base (95), cut the shipping tie. Then,
locate a plastic tie in the indicated hole in the
Base, and use the tie to pull the Upright Wire out
of the hole.
90
95
55
94
90 5
Attach two Base Feet (90) to the Base (95) in the
locations shown with two #8 x 1" Tek Screws (5)
and two Base Foot Spacers (94).
90
5
Then, attach the other two Base Feet (90) with
two #8 x 1" Tek Screws (5).
90
5
94
3.
See the inset drawing. Cut the plastic tie near
the Upright Wire (87).
3
89
Plastic Tie
Attach a Wheel (96) to the Base (95) with a 3/8"
x 2" Bolt (8) and a 3/8" Nut (10). Do not overtighten the Nut; the Wheel must turn freely.
5
87
Then, press a Base Cap (89) into the Base (95).
8
96
95
10
Cut
87
10
4.Identify the Right Upright (85). Hold the Right
Upright near the Base (95) as shown.
4
See the inset drawing. Tie the wire tie in the
Right Upright (85) securely around the end of
the Upright Wire (87). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
85
87
Wire Tie
87
95
85
87
5.Hold the Right Upright (85) against the Base
(95). Be careful not to pinch the Upright Wire
(87). Insert two 3/8" x 4 1/4" Screws (7) with
two 3/8" Star Washers (11) and a 3/8" x 1 1/2"
Screw (14) with a 3/8" Star Washer (11) into the
Right Upright.
Wire
Tie
5
85
14
7
11
11
Partially tighten the 3/8" x 4 1/4" Screws (7) until
the heads of the Screws touch the Right Upright
(85); do not fully tighten the Screws yet. Then,
partially tighten the 3/8" x 1 1/2" Screw (14).
87
95
11
6.With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable;
do not fully fold the Frame yet.
6
89
Attach a Wheel (96) to the Base (95) with a 3/8"
x 2" Bolt (8) and a 3/8" Nut (10). Do not overtighten the Nut; the Wheel must turn freely.
8
Then, press a Base Cap (89) into the Base (95).
95
96
7.Hold the Left Upright (84) against the Base (95).
Insert two 3/8" x 4 1/4" Screws (7) with two 3/8"
Star Washers (11) and a 3/8" x 1 1/2" Screw
(14) with a 3/8" Star Washer (11) into the Left
Upright.
7
7
Partially tighten the 3/8" x 4 1/4" Screws (7) until
the heads of the Screws touch the Left Upright
(84); do not fully tighten the Screws yet.
Partially tighten the 3/8" x 1 1/2" Screw (14).
10
11
ith the help of a second person, tip the treadW
mill so that the Base (95) is flat on the floor.
95
12
14
11
84
55
8.Identify the Right Base Cover (91) and the Left
Base Cover (88). Slide the Right Base Cover
onto the Right Upright (85). Slide the Left Base
Cover onto the Left Upright (84).
8
84
85
88
91
9. Hold the Right Handrail (83) near the Right
Upright (85). Position the Upright Wire (87) on
the Right Handrail as shown.
9
4
See the inset drawing. Set the Right Handrail
(83) on the Right Upright (85). Make sure that
the Upright Wire (87) is positioned as shown
and is not pinched.
87
13
13
83
Attach the Right Handrail (83) to the Right
Upright (85) with three 5/16" x 1" Screws (4) and
three 5/16" Star Washers (13) as shown; do not
fully tighten the Screws yet.
4
85
Attach the Left Handrail (not shown) in the
same way. Note: There is no wire on the left
side.
87
85
13
10.Set the console assembly face down on a soft
surface to avoid scratching the console assembly. Remove the two #8 x 3/4" Screws (1). Next,
lift off the Crossbar (79).
10
1
79
Console
Assembly
11.IMPORTANT: To avoid damaging the
Crossbar (79), do not use power tools and do
not overtighten the #10 x 3/4" Screws (2).
11
2
12
Orient the Crossbar (79) as shown. Attach the
Crossbar to the Left and Right Handrails (82, 83)
with four #10 x 3/4" Screws (2) and four 1/4" Star
Washers (12). Start all four Screws, and then
tighten them.
82
79
2
12
83
14
12.With the help of a second person, hold the console assembly near the Right Handrail (83).
12
See the inset drawing. Connect the Upright
Wire (87) to the console wire. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
Console
Assembly
Console
Wire
87
Console
Wire
87
Wire
Tie
13.Set the console assembly on the Left Handrail
(82) and the Right Handrail (83). Be careful not
to pinch any wires. Insert the excess Upright
Wire (87) into the Right Upright (85).
83
13
Attach the console assembly with six #8 x 3/4"
Screws (1) and four 1/4" x 1/2" Screws (9)
with four 1/4" Star Washers (12). Start all ten
Screws, and then tighten them.
Console
Assembly
87
12
83
82
12
See steps 5 and 7. Fully tighten the four 3/8"
x 4 1/2" Screws (7) and the two 3/8" x 1 1/2"
Screws (14).
9
See step 9. Fully tighten the six 5/16" x 1"
Screws (4).
1
85
15
1
1
9
14.Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
this step is completed.
14
55
Orient the Storage Latch (51) so that the large
barrel and the latch knob are in the positions
shown.
10
Attach the Latch Bracket (6) and the Storage
Latch (51) to the Base (95) with two 3/8" x 2"
Bolts (8) and two 3/8" Nuts (10).
8
51
Latch
Knob
Attach the upper end of the Storage Latch (51)
to the bracket on the Frame (55) with a 3/8" x
2" Bolt (8) and a 3/8" Nut (10). Note: It may be
necessary to move the Frame back and forth to
align the Storage Latch with the bracket.
Large
Barrel
6 95
Lower the Frame (55) (see HOW TO LOWER
THE TREADMILL FOR USE on page 25).
10
8
15.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). Note: Extra hardware
may be included.
16
HOW TO USE THE TREADMILL
HOW TO CONNECT THE POWER CORD
nominal 120-volt circuit capable of carrying 15 or
more amps. To avoid overloading the circuit, do
not plug other electrical devices, except for lowpower devices such as cell phone chargers, into
the surge suppressor or into an outlet on the same
circuit. IMPORTANT: The treadmill may not be compatible with AFCI-equipped outlets.
Use a Surge Suppressor
Your treadmill, like other electronic equipment, can be
damaged by sudden voltage changes in your home’s
power. Voltage surges, spikes, and noise interference can result from weather conditions or from other
appliances being turned on or off. To decrease the
risk of damaging the treadmill, always use a surge
suppressor with the treadmill. To purchase a surge
suppressor, see precaution 13 on page 3.
1
Grounded Outlet
Grounding Pin
Use only a surge suppressor that is UL 1449 listed as a
transient voltage surge suppressor (TVSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipation of
450 joules. The surge suppressor must also be electrically rated for 120 volts AC and 15 amps. There must
be a monitoring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a
properly functioning surge suppressor could result
in damage to the control system of the treadmill
and serious injury to users.
Grounding Pin
Surge
Suppressor
Plug in the Power Cord
A temporary
adapter may
be used to
connect the
surge suppressor to
a 2-pole
receptacle
if a properly
grounded
outlet is not
available.
The treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. The treadmill power cord has a plug with a
grounding pin (see drawing 1 on this page).
DANGER:
Improper connection
of the power cord increases the risk of electric shock. Do not modify the plug—if it will
not fit an outlet, have a proper outlet installed
by a qualified electrician. If you are unsure
whether the treadmill is properly grounded,
contact a qualified electrician.
2
2-pole Receptacle
Adapter
Lug
Metal
Screw
The lug or wire extending from the adapter must
be connected with a metal screw to a permanent
ground such as a properly grounded outlet box cover.
Some 2-pole receptacle outlet box covers are not
grounded. Before using an adapter, contact a qualified electrician to determine whether the outlet box
cover is grounded. The temporary adapter should
be used only until a properly grounded outlet can
be installed by a qualified electrician.
Plug the power cord into a surge suppressor, and plug
the surge suppressor into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances. The outlet must be on a
17
CONSOLE
DIAGRAM
FEATURES OF THE CONSOLE
You can even listen to your favorite workout music or
audio books with the console’s sound system while you
exercise.
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable. When you use the manual mode,
you can change the speed and incline of the treadmill
with the touch of a button. As you exercise, the console
will display instant exercise feedback. You can even
measure your heart rate using the handgrip heart rate
monitor.
To turn on the power, see page 19. To use the manual mode, see page 19. To use an onboard workout,
see page 21. To use a set-a-goal workout, see page
22. To use the sound system, see page 22. To use
an iFit workout, see page 23. To use the information mode, see page 24.
Note: The console can display speed and distance
in either miles or kilometers. To find which unit of
measurement is selected, see THE INFORMATION
MODE on page 24. For simplicity, all instructions in this
manual refer to miles.
In addition, the console features a selection of onboard workouts. Each workout automatically controls
the speed and incline of the treadmill as it guides you
through an effective exercise session.
The console also features an iFit mode that enables
the treadmill to communicate with your wireless
network through an optional iFit module. With the
iFit mode, you can download personalized workouts,
create your own workouts, track your workout results,
race against other iFit users, and access many other
features. To purchase an iFit module at any time, go
to www.iFit.com or call the telephone number on
the front cover of this manual.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 28).
ETPF049613
(PFTL49613)
18
HOW TO TURN ON THE POWER
HOW TO USE THE MANUAL MODE
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
1.Insert the key into the console.
Plug in the power cord (see
page 17). Next, locate the
power switch on the treadmill frame near the power
cord. Press the power switch
into the reset position.
Press the Manual button on the console. If you
are not connected to iFit, the manual mode will be
selected automatically.
See HOW TO TURN ON THE POWER at the left.
2.Select the manual mode.
Reset
3. Start the walking belt.
To start the walking belt, press the Start button, the
Speed increase button, or one of the speed buttons
numbered 1 through 10.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as
you plug in the power cord and press the power
switch into the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see THE INFORMATION MODE on page
24 to turn off the demo mode.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at 1
mph. As you exercise, change the speed of the
walking belt as desired by pressing the Speed
increase and decrease buttons. Each time you
press one of the buttons, the speed setting will
change by 0.1 mph; if you hold down the button,
the speed setting will change in increments of 0.5
mph. Note: After you press the button, it may take
a moment for the walking belt to reach the selected
speed setting.
Next, stand on the
foot rails of the
treadmill. Find the
Key
clip attached to the
Clip
key and slide the
clip onto the waistband of your clothes.
Then, insert the key
into the console.
After a moment, the
displays will light. IMPORTANT: In an emergency,
the key can be pulled from the console, causing
the walking belt to slow to a stop. Test the clip by
carefully taking a few steps backward; if the key is
not pulled from the console, adjust the position of
the clip.
If you press one of the numbered speed buttons,
ETPF049613
the walking
belt will gradually change speed until
(PFTL49613)
it reaches the selected speed setting. To select a
speed setting that includes a decimal—such as 3.5
mph—press two numbered buttons in succession.
For example, to select a speed setting of 3.5 mph,
press the 3 button and then immediately press the
5 button. Note: This will not function if the console
is set to metric units.
To stop the walking belt, press the Stop button.
The time will begin to flash in the display. To restart
the walking belt, press the Start button or the
Speed increase button.
IMPORTANT: Before you use the treadmill, take the
following steps to ensure that the console shows
the correct incline level of the treadmill: First,
press the Incline increase button once. Next, press
either the Incline decrease button or the lowest
numbered incline button to set the treadmill to its
lowest setting. When the frame stops moving, the
treadmill is ready for use.
19
4. Change the incline of the treadmill as desired.
Press the Home button to return to the start mode
(see THE INFORMATION MODE on page 24 to set
the start mode). If necessary, press the Home button again.
To change the incline of the treadmill, press the
Incline increase or decrease button or one of the
incline buttons numbered 0 through 10. Each time
you press one of the buttons, the treadmill will
gradually adjust to the selected incline setting.
When an iFit module is
connected to
www.iFit.com, the iFit
symbol near the top of
the display will light.
5.Follow your progress with the displays.
The matrix—When
you select the manual
mode, the matrix will
display a track that represents 1/4 mile (400­
meters). As you exercise, the indicators around the track will appear in
succession until the entire track appears. The track
will then disappear and the indicators will again
begin to appear in succession.
To reset the displays,
press the Stop button, remove the key, and then
reinsert the key.
6. Measure your heart rate if desired.
The Incline/Calories
display—This display will show the
approximate number
of calories you have
burned. The display
will also show the incline of the treadmill for a
few seconds each time the incline of the treadmill
changes.
Before using
the handgrip
heart rate monitor, remove
the sheets of
plastic from
the metal contacts on the
pulse bar. In
addition, make
sure that your
hands are
clean.
The Time/Pulse display—This display
will show the elapsed
time. The display will
also show your heart
rate when you use the
handgrip heart rate monitor (see step 6).
To measure your heart rate, stand on the foot
rails and hold the pulse bar with your palms on the
metal contacts; avoid moving your hands. When
your pulse is detected, several dashes will appear
and then your heart rate will be shown. For the
most accurate heart rate reading, continue to
hold the contacts for about 15 seconds.
The Distance/Speed
display—This display
can show the distance
that you have walked
or run. The display will
also show the speed of
the walking belt for a
few seconds each time the speed changes.
Contacts
7.When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to zero. The
incline must be at zero or you may damage the
treadmill when you fold it to the storage position. Next, remove the key from the console and
put it in a secure place.
The Center display—This display will show workout instructions.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
20
HOW TO USE AN ONBOARD WORKOUT
the displays for a few seconds and the treadmill
will automatically adjust to the new speed and/or
incline setting.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 19.
The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop. Note: If you select a distance workout,
the workout will end with a three-minute cool-down
segment.
2. Select an onboard workout.
To select an onboard workout, press the Calorie
button, the Timed button, or the Distance button
repeatedly until the desired workout appears in the
display.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors
such as your weight. In addition, if you manually change the speed or incline of the treadmill
during the workout, the number of calories you
burn will be affected.
When you select an onboard workout, the displays
will show the maximum incline, the duration, the
maximum speed, and the name of the workout. In
addition, a profile of the speed settings of the workout will appear in the matrix. If you select a calorie
workout, the approximate number of calories you
will burn will appear in the name of the workout.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or incline buttons; however, when the next segment
of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
3. Start the workout.
ress the Start button or the Speed increase button
P
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking. Note: If you select
a distance workout, the exercise session will begin
with a three-minute warm-up segment before the
distance workout begins.
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting and/
or incline setting may be programmed for consecutive segments.
4. Follow your progress with the displays.
During the workout, the
Current Segment
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout. The height of the
flashing segment indicates the speed setting for
the current segment. At the end of each segment, a
series of tones will sound and the next segment of
the profile will begin to flash. If a new speed and/or
incline setting is programmed for the next segment,
the new speed and/or incline setting will appear in
See step 5 on page 20. The Time/Pulse display
will show the time remaining instead of the elapsed
time.
5. Measure your heart rate if desired.
See step 6 on page 20.
6. W
hen you are finished exercising, remove the
key from the console.
21
See step 7 on page 20.
HOW TO USE A SET-A-GOAL WORKOUT
4. Follow your progress with the displays.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 19.
5. Measure your heart rate if desired.
2. Select a set-a-goal workout.
To select a calorie, time, or distance set-a-goal
workout, press the Set A Goal button on the
console.
6.When you are finished exercising, remove the
key from the console.
Use the increase and decrease buttons next to
the Enter button to set a calorie, time, or distance
goal, and then press the Enter button. Next, press
the increase and decrease buttons next to the
Enter button to select a goal. Press the Speed and
Incline buttons to select the speed and incline for
the workout. The screen will show the duration and
distance of the workout, and the approximate number of calories you will burn during the workout.
See step 5 on page 20.
See step 6 on page 20.
See step 7 on page 20.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player; make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
3. Start the workout.
Press the Start button to start the workout. A
moment after you press the button, the walking belt
will begin to move. Hold the handrails and begin
walking.
Next, press the play button on your personal audio
player. Adjust the volume
level using the volume
increase and decrease
buttons on the console or
the volume control on your
personal audio player.
The workout will function in the same way as the
manual mode (see pages 19 to 20).
The workout will continue until you reach the goal
that you set. The walking belt will then slow to a
stop.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface and instead of on the console.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that you
burn will depend on various factors such as
your weight.
22
HOW TO USE AN IFIT WORKOUT
When you select an iFit workout, the displays will
show the duration of the workout, the distance you
will walk or run, the approximate number of calories
you will burn, and the name of the workout. If you
select a competition workout, the display will count
down to the beginning of the race.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 19.
2. Insert the iFit module into the console.
5. Start the workout.
o use an iFit workout, insert the optional iFit modT
ule into the module housing on the top of the console. To purchase an iFit module at any time, go to
www.iFit.com or call the telephone number on the
front cover of this manual. You must have an iFit
module to use an iFit workout.
During some workouts, an audio coach may guide
you through your workout. You can select a setting for your audio coach (see THE INFORMATION
MODE on page 24).
Note: To use an iFit module, you must have
access to a computer with an internet connection and a USB port. You will also need an iFit.
com membership. To use an iFit module, you must
also have your own wireless network including an
802.11b/g/n router with SSID broadcast enabled
(hidden networks are not supported).
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at the speed setting for the first segment of the workout. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
3. Select a user.
See step 3 on page 21.
If more than one user is registered, you can switch
users in the iFit main screen. Press the increase
and decrease buttons next to the Enter button to
select a user.
6. Follow your progress with the displays.
See step 5 on page 20.
4. Select an iFit workout.
7. Measure your heart rate if desired.
See step 6 on page 20.
To select an iFit workout, press one of the iFit buttons. Before a workout will download, you must add
the workout to your queue on www.iFit.com.
8. W
hen you are finished exercising, remove the
key from the console.
Press the Map button, the Train button, or the Lose
Weight button to download the next workout of
that type in your queue. Press the Compete button to compete in a race that you have previously
scheduled. Press the Track button to view your
workout history. For more information about the
iFit workouts, please see www.iFit.com. Note:
If there are no workouts of the selected type in
your queue, the next workout in your queue will be
downloaded.
See step 7 on page 20.
For more information about the iFit mode, go to
www.iFit.com.
23
THE INFORMATION MODE
If an iFit module is connected, the information
mode will also show the following screens:
The console features an information mode that keeps
track of treadmill information and allows you to personalize console settings.
Press the decrease button to view the status of the
module. The display will show the word WIFI.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
Press the decrease button to view the status of the
audio coach. To turn on or turn off the audio coach,
press the Enter button.
Press the decrease button to view the start mode options. The start mode will appear when you insert the
key into the console or when you press the Home button. Press the Enter button repeatedly to select the
manual mode or the iFit mode as the start mode.
The Time/Pulse display
will show the total number
of hours the treadmill has
been used.
Press the decrease button to check the wireless statistics. Press the Enter button. The center display
will show the software version number, the network
SSID, the network encryption type, the wireless signal
strength, the IP address of the module, the number of
registered users and their names, and the results of
the DNS lookup.
The Distance/Speed
display will show the total
number of miles or kilometers that the walking belt
has moved.
The center display will
show the selected unit of
measurement. To change
the unit of measurement,
press the Enter button or
the Speed increase button.
To view distance in miles, select ENGLISH. To view
distance in kilometers, select METRIC.
Press the decrease button to transfer data. To send
and receive workouts, workout logs, and updates,
press the Enter button. When the process is finished,
the words TRANSFERS DONE will appear in the display.
To exit the information mode, remove the key from the
console.
Press the decrease button next to the Enter button to
view the next screen. The console features a display
demo mode, designed to be used if the treadmill is
displayed in a store. While the demo mode is turned
on, the console will function normally when you plug in
the power cord, press the power switch into the reset
position, and insert the key into the console. However,
when you remove the key, the displays will remain
lit, although the buttons will not function. If the demo
mode is turned on, the word ON will appear in the
center display. To turn on or turn off the demo mode,
press the Enter button or the Speed decrease button.
Press the decrease button next to the Enter button to
view the next screen. The display will show the contrast level of the displays. Press the Incline increase
and decrease buttons to adjust the contrast. Then,
press the Enter button.
24
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
HOW TO MOVE THE TREADMILL
To avoid damaging the treadmill, adjust the incline
to zero before you fold the treadmill. Then, remove
the key and unplug the power cord. CAUTION: You
must be able to safely lift 45 lbs. (20 kg) to raise,
lower, or move the treadmill.
efore moving the treadmill, fold it as described at the
B
left. CAUTION: Make sure that the latch knob is
locked in the storage position. Moving the treadmill
may require two people.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.
1. Hold the metal frame firmly in the location shown
by the arrow below. CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs
and keep your back straight.
1
1
Frame
Handrail
Frame
Wheel
2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.
2.Raise the frame until the latch knob locks in the
storage position. CAUTION: Make sure that the
latch knob locks.
2
Frame
3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1.
See drawing 2. Hold the upper end of the treadmill frame with your right hand. Pull the latch knob
to the left; if necessary, push the frame forward
slightly. Pivot the frame downward a few inches,
and release the latch knob.
Latch
Knob
2. S
ee drawing 1 at the left. Hold the metal frame
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
25
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE
SYMPTOM: The power turns off during use
Regularly clean the treadmill and keep the walking belt
clean and dry. First, press the power switch into the
off position and unplug the power cord. Wipe exterior parts of the treadmill with a damp cloth and a small
amount of mild soap. IMPORTANT: Do not spray
liquids directly onto the treadmill. To avoid damage
to the console, keep liquids away from the console.
Then, thoroughly dry the treadmill with a soft towel.
a.Check the power switch (see drawing c at the left).
If the switch has tripped, wait for five minutes and
then press the switch back in.
b.Make sure that the power cord is plugged in. If the
power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
c.Remove the key from the console, and then
reinsert it.
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.
d.If the treadmill still will not run, please see the front
cover of this manual.
SYMPTOM: The console screen remains lit when
you remove the key from the console
SYMPTOM: The power does not turn on
a.Make sure that the power cord is plugged into a
surge suppressor and that the surge suppressor
is plugged into a properly grounded outlet (see
page 17). Use only a surge suppressor that meets
all of the specifications described on page 17.
IMPORTANT: The treadmill may not be compatible with AFCI-equipped outlets.
a.
The console features a display demo mode,
designed to be used if the treadmill is displayed in
a store. If the displays remain lit when you remove
the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a
few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 24 to turn off the
demo mode.
b.After the power cord has been plugged in, make
sure that the key is inserted into the console.
SYMPTOM: The incline of the treadmill does not
change correctly
c.Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for five minutes and then press
the switch back in.
a.
With the key in the console, press one of the Incline
buttons. While the incline is changing, remove
the key. After a few seconds, re-insert the key.
The treadmill will automatically rise to the maximum
incline level and then return to the minimum level.
This will recalibrate the incline system.
c
Tripped
Reset
26
SYMPTOM: The displays of the console do not
function properly
Locate the
Reed Switch
(73) and the
Magnet (47)
1/8 in.
on the left side
18
of the Pulley
47
(48). Turn the
73
48
Pulley until
the Magnet
Top
is aligned
View
with the Reed
Switch. Make
sure that the
gap between the Magnet and the Reed Switch
is about 1/8 in. (3 mm). If necessary, loosen the
#8 x 3/4" Truss Head Screw (18), move the Reed
Switch slightly, and then retighten the Truss Head
Screw. See the drawings at the left. Reattach the
Motor Hood (62) with the three #8 x 3/4" Screws
(1). If you removed three #8 x 2" Screws (16),
reattach them. Then, run the treadmill for a few
minutes to check for a correct speed reading.
a.Remove the key from the console and UNPLUG
THE POWER CORD. With the help of a second
person, carefully lower the Left and Right Uprights
(84, 85). If there are three #8 x 2" Screws (16)
in the bottom of the Belly Pan (75), remove the
Screws. Note: A Phillips screwdriver with a shaft at
least 5 in. (13 cm) long is required.
a
84
85
75
16
SYMPTOM: The walking belt slows when walked on
16
a.Use only a surge suppressor that meets all of the
specifications described on page 17.
Then, raise the Uprights (84, 85).
b.If the walking belt is overtightened, treadmill performance may decrease and the walking belt may
Next, remove the three #8 x 3/4" Screws (1) and
become damaged. Remove the key and UNPLUG
carefully pivot off the Motor Hood (62).
THE POWER CORD. Using the hex key, turn both
idler roller screws counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
1
62
2 to 3 in. (5 to 7 cm) off the walking platform. Be
1
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
b
2–3 in.
Idler Roller Bolts
27
b. If the walking belt slips when walked on, first
remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
c.Your treadmill features a walking belt coated with
high-performance lubricant. IMPORTANT: Never
apply silicone spray or other substances to
the walking belt or the walking platform unless
instructed to do so by an authorized service
representative. Such substances may deteriorate the walking belt and cause excessive wear.
If you suspect that the walking belt needs more
lubricant, see the front cover of this manual.
d.If the walking belt still slows when walked on, see
the front cover of this manual.
b
SYMPTOM: The walking belt is off-center or slips
when walked on
a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller screw clockwise 1/2
of a turn; if the walking belt has shifted to the
right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
a
28
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise; never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
29
PART LIST
Model No. PFTL49614.0 R0814A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
#8 x 3/4" Screw
#10 x 3/4" Screw
Inner Cushion
5/16" x 1" Screw
#8 x 1" Tek Screw
Latch Bracket
3/8" x 4 1/4" Screw
3/8" x 2" Bolt
1/4" x 1/2" Screw
3/8" Nut
3/8" Star Washer
1/4" Star Washer
5/16" Star Washer
3/8" x 1 1/2" Screw
#8 x 3/4" Tek Screw
#8 x 2" Screw
#8 x 1/2" Pan Head Screw
#8 x 3/4" Truss Head Screw
#8 x 1 1/2" Screw
5/16" x 1 1/2" Bolt
5/16" x 3 5/8" Bolt
3/8" x 1" Bolt
1/4" x 1" Bolt
Idler Roller Bolt
3/8" x 1 3/4" Bolt
3/8" x 1 1/2" Hex Head Bolt
3/8" x 3/4" Bolt
#8 x 1/2" Bright Screw
#8 x 1/2" Ground Screw
#12 x 1 1/4" Screw
1/4" Motor Bolt
#8 Belt Guide Screw
1/4" Star Washer
Console
3/8" Jam Nut
5/16" Flange Nut
Hood Clip
Cable Tie
#8 x 3/4" Truss Head Screw
Left Foot Rail
Latch Warning Decal
Platform Cushion
Belt Guide
Walking Platform
Frame Cap
Frame Spacer
Magnet
Front Roller/Pulley
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
Walking Belt
Console Frame
Storage Latch
Console Ground Wire
#8 x 1" Screw
Right Foot Rail
Frame
Roller Bracket
Roller Ground Wire
Right Rear Foot
Left Rear Foot
Idler Roller
Left Tray
Motor Hood
Hood Accent
Lift Frame
Lift Frame Ground Wire
Drive Motor Belt
Drive Motor
Controller Ground Wire
Power Cord
Grommet
Power Switch
Controller
Reed Switch
Reed Switch Clamp
Belly Pan
Wire Tie
Console Clamp
Console Base
Crossbar
Cushion Plate
Handrail Cap
Left Handrail
Right Handrail
Left Upright
Right Upright
Right Tray
Upright Wire
Left Base Cover
Base Cap
Base Foot
Right Base Cover
Caution Decal
Key/Clip
Base Foot Spacer
Base
Wheel
21
4
4
6
4
1
4
6
4
6
6
8
6
2
9
3
4
5
2
2
2
2
1
2
1
1
2
7
1
8
2
4
2
1
4
4
3
2
2
1
1
4
2
1
2
2
1
1
30
1
1
1
1
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
1
1
4
2
1
1
1
1
1
1
1
2
4
1
2
1
2
1
2
Key No. Qty.
Description
Key No. Qty.
Description
Incline Motor
Incline Motor Spacer
User’s Manual
97
98
1
1
*
–
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
31
24
32
33
19
56
30
80
42
28
3
15
18
59
36
60
21
41
30
80
42
24
15
3
33
40
19
28
30
36
18
58
21
32
43
57
56
30
36
55
30
44
20
10
45
54
80
42
3
15
49
46
8
30
48
47
80
3
42
15
51
32
30
20
43
36
10
30
23
8
10
45
46
6
8
EXPLODED DRAWING A
Model No. PFTL49614.0 R0814A
EXPLODED DRAWING B
Model No. PFTL49614.0 R0814A
1
62
37
1
37
1
63
37
39
39
31
64
28
65
22
66
28
28
67
22
68
17
73
15
76
72
18
15
74
15
16
75
69
15
16
16
33
28
70
71
EXPLODED DRAWING C
Model No. PFTL49614.0 R0814A
12
9
82
2
12
81
79
4
13
1
1
1
13
2
12
1
4
12
84
14
1
9
83
87
81
11
1
4
7
13
4
13
89
11
35
88
85
27
92
27
90
95
5
8
87
25
94
96
10
90
5
97
26
89
11
92
14
11
35
35
35
90
10
5
7
98
96
94
90
5
8
34
91
EXPLODED DRAWING D
Model No. PFTL49614.0 R0814A
93
38
34
17
50
29
52
61
1
77
53
1
1
53
77
1
1
1
78
86
1
1
1
1
35
1
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
•the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
IMPORTANT: To protect your fitness equipment with an extended service plan, see page 6.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The frame is warranted for a lifetime. The drive motor
is warranted for twenty-five (25) years from the date of purchase. Parts and labor are warranted for one
(1) year from the date of purchase.
This warranty extends only to the original purchaser. ICON’s obligation under this warranty is limited to
repairing or replacing, at ICON’s option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to
a service center, freight charges to and from the service center will be the customer’s responsibility. For
replacement parts shipped while the product is under warranty, the customer will be responsible for a minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge. This
warranty does not extend to any damage to a product caused by or attributable to freight damage, abuse,
misuse, improper or abnormal usage, or repairs not provided by an ICON authorized service center; to
products used for commercial or rental purposes or as store display models; or to products transported
or purchased outside the US. No other warranty beyond that specifically set forth above is authorized by
ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 365496 R0814A
Printed in China © 2014 ICON Health & Fitness, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement