Home Automation Products — Decora Home Controls (DHC)

Home Automation Products — Decora Home Controls (DHC)
Home Automation
Products —
Decora Home
Controls (DHC)
Leviton’s Decora Home Controls (DHC) Residential Powerline
Carrier components provide homeowners with everything
needed for programmed and manual control of lighting and
appliances using their home’s existing AC wiring. The following
pages highlight key automation applications for a variety of
Leviton DHC components. Comprehensive product listings are
also provided, including specifications, features, benefits, available colors, photos and line drawings, to assist in the selection
of appropriate DHC components for your intended use.
Leviton’s current listing of DHC components features new
programmers/controllers and receivers with Scene Lighting
Control capability for coordinated, multi-location lighting
schemes. Many new DHC components also feature
Intellisense™ (gated automatic gain control), a Leviton exclusive. Intellisense reduces noise sensitivity without reducing
command signal sensitivity, resulting in the most reliable
performance of any powerline carrier home automation system
available today.
RESIDENTIAL GRADE
Overview __________________B1
DHC Powerline Carrier
Transmitters
Basic Programmer ________B2
Table Top Controller_______B2
Toscana Controller________B2
Wall Mounted
Switch Controllers _____B3–B4
Wall Mounted Switch
Controller with Scene
Control Capability ________B4
DHC Wireless
Controller/Transceiver _____B5
Key Chain Transmitter _____B5
Passive Infrared Transmitter B6
Photocell Controller _______B6
Telephone Transponder____B7
Burglar Alarm Interface ____B7
Dry Contact Transmitter ___B7
DHC Network Integrity Products
System Amplifier/
Coupler/Repeater _________B8
Panel-Mounted
Surge Protector __________B8
DHC Powerline Receivers
Wall Switches with
Scene Control ___________B9
Wall Switches _______B10-B10
Rockers and _______________
Frames______________B9-B11
Remote Wall Switches ___B12
Double Pole 20A
Wall Switch _____________B12
Plug-In Universal
Low Voltage Module______B13
Plug-In Lamp Module _____B13
Wall Receptacles ________B14
2000 Watt Dimmer Module_B15
Fixture Relay Module _____B15
Dimming Fixture Module __B15
DHC Noise Filters
Signal Strength Indicator__B16
S E C T I O N
B
Features and Benefits
■ A network of controllers and DHC switch, dimmer, fixture and receptacle receivers that
communicate via unique coded switching signals over a home’s AC wiring to automate
control of lights and appliances
■ DHC components replace switches and outlets, which simplifies installation compared
with other automation systems that require dedicated proprietary wiring backbones.
■ An effective way to contribute to energy conservation and
extend bulb and appliance life
Photocell Controller
#6308
■ Offers significant security benefits to today’s
homeowner, including programmed
automatic and manual home
security features
Receptacle Receiver #6227
Panic Button
Controller
#HCC1A-1SW
Toscana Programmer
#HCCPG-1TW
Seven-Scene
Dimming
Controller
#HCCS7-10W
Motion Sensor
#6417
Hand-held Controller
#6313
Switch Receivers #6291,
6293, 6381, HCM10-1SW,
HCM06-1SW, HCS10-1SW
Plug-in Transceiver
#6314-W
System
Amplifier/Repeater
#HCA02-10E
Burglar Alarm
Interface
#6330
Enjoy Outstanding Home Automation Capabilities with Easy-to-Install,
Decora Home Controls
DHC Controllers
B1
DHC Receivers
Network Integrity Products
DHC Powerline Carrier
Controllers are available in a
variety of configurations,
including wall-mounted programmable, plug-in tabletop,
wireless hand-held, wall
switch/dimmer and sensor
units. Controllers send
control signals to specified
DHC address throughout
the DHC network.
DHC Powerline
Carrier Receivers can
be set to any of 256
DHC address codes
for remote/manual
control of incandescent, inductive,
fluorescent, or lowvoltage loads. They
are available as
receptacle, plug-in,
fixture and multilocation wall switches
and dimmer switches.
Leviton highly recommends installing these
products in every
DHC application.
The System
Coupler/Repeater
ensures DHC signal
integrity throughout
the house. Panelmount surge devices
protect DHC components from transient
voltage surges.
Cat. No. HCCS7-10W
Cat. No. HCM10-1SW
Cat. No. 51120-1
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
DHC Powerline Programmers/Controllers
DESCRIPTION
CAT. NO.
DHC Toscana™ Deluxe Programmer— A new powerful home automation
controller that not only provides one-touch access to up to 64 whole-house
lighting scenes, but permits direct remote control of up to 256 devices and
allows for 2-way communication to confirm locally-initiated status changes on
receivers with 2-way communication. Allows up to 64 timed events, turns
On/Off lights at dusk and/or down on astronomical clock that is accurate to
within +/- 15 seconds per month. Automatically turns appliances On/Off and
lights On/Off/Dim/Bright. Permits input to real-named devices; i.e. “wall
scone” rather than device code (e.g. B5). Individual timed events or up to 8
groups of timed events can be selected and run on a recurring basis; battery
backup protects settings; permanent memory features guaranteed 20 year
life; mounts on standard 4-gang box; all PC software and Toscana™
firmware upgrades for life.
Rated: 120V 60Hz AC only.
Power Consumption: 3 Watts
Cat. No. HCA02-10E—System Amplifier should be installed in all panels in
every DHC installation to ensure adequate signal strength.
HCCPG-1TW
HCCPG-1TW
1
Table Top Controller★— Provides manual remote control for all 256 DHC
addresses. Command functions include ON/OFF, ALL LIGHTS ON/ALL OFF
and DIM/BRIGHTEN. The 6320 plugs into any 120 volt AC receptacle to
transmit command signals over existing AC wiring.
Rated: 120V 60Hz AC only.
5
2
9
3
6
3
4
7
0
1
1
4
8
1
1
1
AL
NU
MA
5
2
1
1
1
ER
OLL
NTR
CO
N
O
6
O
M
A
B
O
R
H
F
IG
F
C
K
T
I
D
TS
H
G
LI N
LL O
A
G
E
IM
A
TS
H
G
LI
FF
LL O
6320
Basic Wall Mounted Programmer★— A powerful home automation
controller that is easy to install and use. Compact, low-profile unit fits in singlegang wallbox. Accepts up to four addresses; maximum two ON and two OFF
commands per address. SECURITY mode randomly selects ON and OFF
times to make an empty home appear occupied. ALL LIGHTS ON switch acts
as a panic-button lighting system, switching on all DHC switch modules with
one touch. DIM/BRIGHTEN command can automatically adjust lighting levels
of all fixtures controlled by DHC dimming receivers. LED readout shows time
and program status; battery back-up protects clock setting and program status
for ten hours during power interruption. Available in Ivory, White, and Almond.
Rated: 120V 60Hz AC only Power Consumption: 2.5 watts maximum
6312-I
1
2
3
4
A
BRIGHT LIGHT
ON
E
M
I
OFF
DIM
UNIT
TIME
CLEAR
SECURITY
®
SPECIFICATIONS & FEATURES
6312-I,-W, -A
1.38
(35.1 mm)
All devices are UL Listed. Also CSA Certified except where indicated by★
1.71
(43.5 mm)
5.51 (140.0 mm)
• Programmer adds user-devised scheduling to
DHC automated control of lights and appliances for greater convenience, energy savings
and security
• Programmer and Controllers send DHC
switching commands over existing 60Hz
120V AC house wiring.
• Backed by a Limited Two-Year Warranty
•
•
•
•
0.95
(24.1 mm)
2.72 (68.8 mm)
4.52 (114.9 mm)
TESTING & CODE COMPLIANCE
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
COLOR
Colors available as listed: Ivory (-I), White (-W),
Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
BASIC WALL MOUNTED PROGRAMMER
Cat. No. 6312
2.41 (61.2 mm)
2.25 (57.2 mm)
4.45 (113.0 mm)
8.80 (223.5 mm)
TABLE TOP CONTROLLER
Cat. No. 6320
2.69 (68.3 mm)
1.64
(41.7 mm)
4.69 (119.1 mm)
with cover closed
5.87 (148.1 mm)
1.95
(49.5 mm)
2.34
(59.4 mm)
TOSCANA CONTROLLER
Cat. No. HCCPG-1TW
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B2
Home Automation Products
DHC Powerline Carrier Wall Switch Controllers
HCC10-1SW in 80301-W
DESCRIPTION
CAT. NO.
One-Address ON/OFF Controller — One ON/OFF rocker transmits ON/OFF
commands to one address. Illuminated green LED at bottom of face indicates
unit is On. (Note: Shipped in White only. Order color change kit for Ivory and
Almond)
HCC10-1SW
ALL LIGHTS ON/ALL OFF Controller — One ALL LIGHTS ON/ALL OFF
rocker transmits commands to all receivers set to the same letter code as this
transmitter. Provides “Panic Button” lighting control for safety and security.
NOTE: Receptacle Receivers will not respond to ALL ON command.
Illuminated green LED at bottom of face indicates unit is On. (Note: Shipped in
White only. Order color change kit for Ivory and Almond)
HCC1A-1SW
One-Address Dimming Controller — One ON/OFF rocker transmits
ON/OFF commands to one address in the same letter code group as this
transmitter switch while the built-in arrow-shaped rocker transmits
BRIGHT/DIM commands to that same address. Illuminated green LED at
bottom of face indicates unit is On. (Note: Shipped in White only. Order color
change kit for Ivory and Almond)
HCC1D-1LW
Two-Address Dimming Controller — Two sets of ON/OFF buttons transmit
ON/OFF commands to two sequential addresses in the same letter code group
as this controller. One set of GROUP BRIGHT/DIM buttons transmits GROUP
BRIGHT/DIM commands to the most recently selected address.
(Note: Shipped in White only. Order color change kit for Ivory and Almond)
HCC2D-10W
All devices are UL Listed and CSA Certified.
No more than 4 Controllers should be installed on a single branch circuit.
HCC1D-1LW in 80301-W
2.38 (60.5 mm)
1.73 (43.9 mm)
1.38
(35.8 mm)
SPECIFICATIONS & FEATURES
2.70
4.11 (104.9 mm)
• Fit in standard wallboxes and replace regular
switches to provide DHC control capability as
indicated in “Description”
• Exclusive Intellisense™ technology for transmitting clear command signal without noise
interference
• Uses existing 120V AC 60Hz wiring to send
command signals
• Compatible with Decora screwless and
standard Decora wallplates
• Green LED illuminates to confirm ON command is sent
• Decora styling coordinates with Leviton’s
popular Decora line; complements any
interior
• Backed by a Limited Two-Year Warranty
1.67
(42.5 mm)
TESTING & CODE COMPLIANCE
DHC CONTROLLER
Cat. Nos. HCC10-1SW and HCC1A-1SW
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 224A Tested (and others as appropriate)
2.38 (60.3 mm)
Note: A Cat. No. HCA02-10E System
Amplifier should be installed at the
main panel in every DHC installation to
ensure adequate signal strength.
2.62 (166.6 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
4.11 (104.4 mm)
All devices are shipped in White only. See page B4 for
compatible color change kits.
2.70
1.67
(42.5 mm)
COLOR
DHC CONTROLLER
Cat. No. HCC1D-1LW
B3
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
DHC Powerline Carrier Wall Switch Controllers
DESCRIPTION
CAT. NO.
Three-Address Dimming Controller — Three sets of ON/OFF buttons transmit ON/OFF commands to three sequential addresses in the same letter code
group as this controller. One set of GROUP BRIGHT/DIM buttons transmits
GROUP BRIGHT/DIM commands to the most recently selected address.
(Note: Shipped in White only. Order color change kit for Ivory and Almond)
HCC3D-10W
Four-Address Dimming Controller — Four sets of ON/OFF buttons transmit
ON/OFF commands to four sequential addresses in the same letter code
group as this controller. One set of GROUP BRIGHT/DIM buttons transmits
GROUP BRIGHT/DIM commands to the most recently selected. (Note:
Shipped in White only. Order color change kit for Ivory and Almond)
HCC4D-10W
Three-Address Dimming, ALL LIGHTS ON/ALL OFF Controller — Three
sets of ON/OFF buttons transmit ON/OFF commands to three sequential
addresses in the same letter code group as this controller. One set of GROUP
BRIGHT/DIM buttons transmits GROUP BRIGHT/DIM commands to the most
recently selected address. One set of ALL LIGHTS ON/ALL OFF buttons transmits commands to all receivers set to the same letter code as this transmitter.
(Note: Shipped in White only. Order color change kit for Ivory and Almond)
HCC4A-10W
Seven-Scene Dimming Controller — Each of seven SCENE buttons transmits ON commands to preset levels to 12 sequential addresses in the same
letter code group as this controller. (Note: 12-address sequence continues at
address 1 if address 16 is reached before all 12 sequential addresses are
completed.) Only Cat. Nos. HCM10 (6343), HCM06 (16383) or HCS10
(16293) Scene Capable Switch Receivers can be used with this controller. One
set of SCENE BRIGHT/DIM buttons transmits SCENE BRIGHT/DIM commands to the most recently selected scene. One OFF button transmits OFF
command to the most recently selected scene. (Note: Shipped in White only.
Order color change kit for Ivory and Almond)
HCCS7-10W
HCC4A-10W in 80301-W
The HCCS7-10W utilizes extended code format. This command structure is not compatible with older versions of the
DHC System Coupler/Repeater Cat. No. 6201.
All devices are UL Listed and CSA Certified.
No more than 4 Controllers should be installed on a single branch circuit.
1
2
SCENE 3 SCENE 4
2.69
(68.2 mm)
3.28 (83.3 mm)
4.40 (112.0 mm)
1.40
(35.5 mm)
SCENE 5 SCENE 6
SCENE 7
OFF
HCCS7-10W in 80301-W
SPECIFICATIONS & FEATURES
• Fit in standard wallboxes and replace regular
switches to provide DHC control capability as
indicated in "Description"
• Exclusive Intellisense™ technology for transmitting clear command signal without noise
interference
• Uses existing 120V AC 60Hz wiring to send
command signals
• Compatible with Decora screwless and standard Decora wallplates
• Green LED illuminates to confirm ON command is sent
• Decora styling coordinates with Leviton's popular Decora line; complements any interior
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 224A Tested (and others as appropriate)
COLOR
1.60
1.76
(40.6 mm)
(45.0 mm)
DIMENSIONS FOR ALL DHC CONTROLLERS
ON THIS PAGE
Cat. No. HCCS7-10W Shown
All devices are shipped in White only. See chart for
compatible color change kits.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
COLOR CHANGE KITS
Compatible Color Change Kit
For Controller:
Cat. No. White
Cat. No. Ivory
HCC10-1SW, HCC1A-1SW
DRK0S-0LW
DRK0S-0LI
Cat. No. Almond
DRK0S-0LA
HCC1D-1LW
DRK1D-00W
DRK1D-00I
DRK1D-00A
HCC2D-10W
DCK2D-00W
DCK2D-00I
DCK2D-00A
HCC3D-10W
DCK3D-00W
DCK3D-00I
DCK3D-00A
HCC4A-10W
DCK4A-00W
DCK4A-00I
DCK4A-00A
HCC4D-10W
DCK4D-00W
DCK4D-00I
DCK4D-00A
Note: A Cat. No. HCA02-10E System
Amplifier should be installed at the
main panel in every DHC installation to
ensure adequate signal strength.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B4
Home Automation Products
DHC Powerline Carrier Controllers
DESCRIPTION
6314-W & 6313
CAT. NO.
Hand-Held Wireless Controller/Plug-In Transceiver with Built-In
Appliance Module — Operate lights and appliances from up to 75 feet away
WITHOUT WIRES. The Cat. No. 6313 Hand-Held Wireless Controller sends
command signals by means of radio waves through walls and ceilings from
inside or outside the home. The Cat. No. 6314-W Plug-in Transceiver picks up
the signals and re-transmits them onto the AC wiring network for up to 8
groups of Receivers set to the same Letter Code. The Transceiver also has a
built-in appliance module. A lamp or other electrical device will respond to
commands sent to A1 or A9 (or any other Letter Code A-P) when plugged into
the outlet on the Transceiver.
These units make it possible to switch OFF downstairs lights from upstairs,
outdoor lights from the car, or kid’s room lights from the master bedroom.
Multiple Transceivers can be used in conjunction with a single Hand-Held
Controller to expand the range of signal reception by spacing them between 6
and 75 feet apart throughout the residence. These devices will allow complete
hand-held control of the home’s lighting and appliances. Note that the 6314-W
Transceiver will only receive signals from the 6313 Hand-Held Controller and
the 6332 Key Chain Remote Controller. Hand-Held Controllers require four
AAA batteries (not included). Color: 6313 is Black, 6314-W is White.
ON
OFF
1
9
2
10
4
ON-OF
11
F
5
12
6
A
O
13
C
M
7
E
K
14
G
I
HOUS
8
E
15
1-8
9
UNIT 9-1
6
16
O
A
C
M
E
K
I
G
1-8
9-16
®
®
6313,6314-W
Multiple Cat. No. 6314-W Transceiver units should be positioned at least
six feet apart to avoid interference.
6332
SPECIFICATIONS & FEATURES
• Leviton’s Hand-Held Controller adds the
convenience of wireless fingertip control of
appliances and lighting to DHC systems
• Ultra-compact Key Chain Transmitter adds
wireless ON/OFF control of up to four
devices
• Both Hand-Held and Key Chain Controllers
operate through the companion Plug-In
Transceiver
• Backed by a Limited Two-Year Warranty
Wireless Key Chain Remote Controller — Transmits command signals to
turn ON any light or appliance that is plugged into the Cat. No. 6314-W (sold
separately). Up to four devices can be controlled using the 6332 and 6314-W
transceiver module with a transmission range of up to 75 feet. The 6314-W
uses the home’s existing AC wiring to re-transmit signals it receives from the
6332 so that additional lights and appliances connected to other DHC
receivers can also be controlled using the 6332. The 6332 and 6314-W provide
a complete, fully expandable system. Lamp modules can be added to control
additional lamps; appliance receivers can be added to control outside lights.
Color: Black only.
Battery
ON
OFF
®
KEY CHAIN
REMOTE CONTROL
6332
All devices are UL Listed only, not CSA Certified.
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-66800)
CSA Certified (File #LR-69519)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
HOUSE
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
4.53 (115.1 mm)
Colors available as listed: White (-W).
4.50 (114.3 mm)
COLOR
O
A
C
E
M
K
G
I
ON/OFF
®
Transceiver Module
2.80
(71.1 mm)
HAND-HELD CONTROLLER
Cat. No. 6313
B5
0.81
(20.7 mm)
2.75 (70.0 mm)
PLUG-IN TRANSCEIVER
Cat. No. 6314-W
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
1.26
(32.1 mm)
Home Automation Products
DHC Powerline Carrier Controllers
DESCRIPTION
CAT. NO.
Passive Infrared Controller — A motion-sensing light control ideal
for use in outdoor locations, such as backyards, garages and storage
buildings. Built-in infrared sensing technology monitors 4,000-sq. ft.
field, 110 degrees wide, up to 40 feet in front of unit. When the 6417
senses motion in its field of view, it can respond by sending two types
of signals: ON commands to Receivers set to control lights at four
sequential system addresses, and MOTION DETECTED signals to
other 6417’s set to the same address. As long as the source of
infrared radiation remains in the 6417 sensor field, it continues to send
ON signals every six seconds to these addresses, providing the
convenience of continuous illumination along a path from a garage to
an entranceway, or around an entire residence, if desired. It can also
turn on an inside lighting fixture as well as outdoor fixtures to help
deter intruders.
The 6417 is encased in a moisture-resistant housing. The control
panel includes sensitivity adjustments to prevent nuisance tripping by
small animals and a time delay to set the length of time the lights stay
on (6 seconds to 30 minutes). Manual override of the 6417 controller
can be achieved with the use of HCCS7-10W or 6312 Controllers.
Passive Infrared Transmitter installs easily into standard round outdoor junction box and comes complete with mounting plate, control
unit, par lampholders and complete installation and operating
instructions. Color: Brown.
6417
6417
Photocell Controller — Automatically senses approaching darkness
and responds by sending ON commands to as many as four groups
of DHC Receivers (all receiver modules in each group must be set to
the same Letter Code). The Receiver Modules respond by turning
lights ON inside or outside the home. The 6308 will also transmit OFF
commands in response to a user-selected number of hours that it’s
been ON, or in response to approaching daylight. The Receivers
respond by turning their assigned lighting loads inside or outside the
home OFF. The 6308 mounts on a standard round or GEM electrical
box. Color: Gray.
6308
SPECIFICATIONS & FEATURES
6308
All devices are UL Listed only, not CSA Certified.
• DHC Passive Infrared Sensor/Transmitters
can work alone or in multiple arrays to turn on
designated lighting inside and outside the
home when motion is detected for improved
security and safety
• Up to four transmitters can be wired into a
single branch circuit
• Photocell Sensor/Transmitters can add
“night watchman” automated switching
capability to any DHC network
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
1.18 (45.9 mm)
• UL Listed (File #E-66800)
• NOM Certified (#057)
• UL 224A Tested (and others as appropriate)
3.28 (83.31 mm)
CODE
DIALS
COLOR
Colors available as listed.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
BACK-WIRE HOLES
0.61
(15.4 mm)
4.48 (113.9 mm)
PHOTOCELL TRANSMITTER
Cat. No. 6308
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B6
Home Automation Products
DHC Powerline Carrier Controllers
DESCRIPTION
6325
CAT. NO.
Telephone Transponder — Allows user to control all 256 addresses in an
entire DHC network from anywhere in the world using a Touch-Tone™ telephone. The DHC Transponder also functions as a DHC isolated contact (class
B) module that can be controlled from the phone or any DHC Controller. The
6325 includes a pair of low-voltage wire screw terminals. The Transponder
simply plugs into any 120 volt AC receptacle and attaches to a phone jack
using the line splitter provided. The Transponder activates upon “hearing” its
unique, user-devised access code. Users can order the 6325 to send ON,
OFF, ALL LIGHTS ON and ALL OFF commands using the phone keypad. For
optimum performance, it is recommended that the 6325 be used on a dedicated phone line. The Transponder confirms all commands with a simulated
human voice. The device is equipped with a 6-hour battery back up.
Color: Black.
6325
Note: The Telephone Transponder does not work with call waiting.
Burglar Alarm Interface — Simply plugs into a grounding 15 Amp receptacle.
Connects to an existing intrusion alarm and turns lights ON whenever the
alarm is tripped. Provides choice of 3 modes of light switching when activated.
Either a low-voltage input (6-18V AC, DC or audio) or a dry contact closure can
trigger the 6330. The unit has a test button that permits activation whether or
not the device is connected to an alarm system. The ALL OFF button turns
OFF anything that was turned ON by the unit. Available Color: Ivory.
TE
ST
UN
IT
CO
13
1
9
5
M
DE
HO
A
AL
L UN
IT
OF
F
E
US
®
E CO
INPU
AB T
DE
MO
1 2 DE
3
6330
6330
SPECIFICATIONS & FEATURES
• Telephone Transponder allows user to control an entire DHC network from anywhere in
the world using a Touch-Tone telephone
• Burglar Alarm Interface connects to existing
intrusion alarms, issuing flashing light
commands to DHC switching modules when
tripped for improved security
• Up to four transmitters can be wired into a
single branch circuit
• Dry Contact Transmitters link signaling from
photocells, infrared sensors, security systems, motion sensors, and other dry contact
transmitters to DHC controlled devices
• Backed by a Limited Two-Year Warranty
Dry Contact Controllers★— Allow monitoring of up to four dry contact
closures. No. 6315 Maintained Contact Transmitter sends ON or OFF command signals in response to contact opening or closure. No. 6316 Momentary
Contact Transmitter sends ON or OFF command signals in response to
contact closure, and no command signal upon contact openings. These units
can be used with photocells, infrared sensors, security system, motion
sensors, and any other dry-contact-based sensors. Installs in a single-gang
wallbox. Color: Ivory.
Power to control side: 125V 60Hz AC Only.
1
A
E
M
5
13
I
LV LEAD COLOR
9
TRANSMITS TO
Blue
A1*
Orange
A2*
Yellow
A3*
6315, 6316
Brown
A4*
*Or any four sequential address codes within the same Letter Code group
as the Transmitter.
TESTING & CODE COMPLIANCE
*Does not work with proprietary telephone company answering modes or with call waiting. It is advised to put
Cat. No. 6325 on a dedicated telephone line.
All devices are UL Listed. Also CSA Certified except where indicated by★
COLOR
Colors available as listed.
6.97 (177.0 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
5.98 (51.9 mm)
TELEPHONE TRANSPONDER
Cat. No. 6325
B7
E
I
13
5
9
.94
(33.3 mm)
1.75
(44.5 mm)
2.63 (66.8 mm)
1
A
M
2.75 (69.8 mm)
4.61 (117.1 mm)
BLACK
4.06 (103.1 mm)
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
1.12 (28.4 mm)
•
•
•
•
WHITE
.44
(11.2 mm)
1.88
(47.8 mm)
MAINTAINED DRY CONTACT TRANSMITTERS
Cat. No. 6315 & 6316
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
DHC Network Integrity Products
DESCRIPTION
CAT. NO.
COMPU
IIFX
MAC
A NEW
UL
NEEDS
R
T WEISS
STUAR
B
6201
0V
120/24 r?
Coupleer
Repeat
A
N
0V
120/24
System
, 15 A
2-Pole Breaker
Circuit
TER
System Amplifier/Coupler/Repeater with Built-in Test Signal Generator* —
Couples transmitter (programmer and controller) signals generated on the
120V leg where the transmitter draws power onto the other leg in a 120/240V
single-phase 3-wire residential wiring system. The HCA02-10E also amplifies
and repeats command signals to assure proper signal strength throughout the
DHC network. Green pilot light indicates when DHC signal is transmitting.
Features Intellisense™ to ensure top performance even when noise is present
on the AC powerline. The HCA02-10E provides convenient built-in ON/OFF
test signal transmission for easy signal strength verification at individual module locations using Leviton’s Cat. No. 6386 Signal Strength Indicator.
The HCA02-10E should be installed at the main panel on its own dedicated
15A breaker in accordance with NEC requirements.
Note: A Cat. No. HCA02-10E System Amplifier should be installed at the
main panel in every DHC installation to ensure adequate signal strength.
HCA02-10E
HCA02-10E
Panel Mounted Surge Protective Device (SPD) — Provides homes with protection from high-energy transient voltage surges that can damage sensitive
electronic circuits in computers, audio and video components, and electronic
appliances. Leviton DHC components incorporate microcircuitry into their
design, and protection of a DHC network against surges on the powerlines is
highly recommended.
Unique hybrid suppression circuitry in 51120 devices provide outstanding
surge protection. The 51120-1,-3 is housed in a standard J-box metal
enclosure with pre-punched standard knockouts. The 51120-3R features a
NEMA 3R-rated enclosure suitable for outdoor use.
Note: A Cat. No. 51120 Panel Mount Surge Protective Device should
be installed at the service panel in every DHC installation
51120-1
51120-1
Rated:
Cat. No. 51120-1
Cat. No. 51120-3
Cat. No. 51120-3R
120/240V AC 60 Hz
120/208V AC 3-Phase WYE 60 Hz
120/240V AC 60 Hz
SPECIFICATIONS & FEATURES
3.08 (78.1 mm)
2.79 (70.9 mm)
*Older versions of this device may not be compatible with Cat. No. HCCS7-10W Scene Lighting Controller.
4.49 (113.9 mm)
1.64
41.7 mm
4.77 (121.2 mm)
SYSTEM AMPLIFIER/COUPLER/REPEATER
Cat. No. HCA02-10E
Ø
0
(7. .281
1m
m)
2.25
(57.1 mm)
6.00 REF. (152.4 mm)
7.00 (177.8 mm)
6.00 (152.4 mm)
5.88 (149.3 mm)
4.06
(103.1 mm)
1.06 (26.9 mm)
C
L
6.00 (152.4 mm)
• HCA02-10E UL Listed (File #E-66800),
51120 UL Listed to 1449 Standards
• HCA02-10E CSA Certified (File # LR3413),
51120 CSA Certified
• HCA02-10E UL 244A Tested (and others
where appropriate)
7.00 (177.8 mm)
6.00 (152.4 mm)
4.00 (101.6 mm)
TESTING & CODE COMPLIANCE
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
6.50 (165.1 mm)
4.45 (113.03 mm)
• System Amplifier Coupler/Repeater recommended for all DHC installations to insure
adequate
signal strength
• Panel-Mounted Surge Protective Device
recommended for all DHC installations to
protect DHC circuitry from damaging highenergy transient voltage surges
• HCA02-10E Backed by a Limited Two-Year
Warranty, 51120 Backed by a Limited
10-Year Warranty
PANEL MOUNTED SURGE PROTECTIVE DEVICE
Cat. No.51120-3R
PANEL MOUNTED SURGE PROTECTIVE DEVICE
Cat. No.51120-1,-3
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B8
Home Automation Products
DHC Powerline Carrier Wall Switches
DESCRIPTION
CAT. NO.
Single-Pole (One Location) or 3-Way (Multi-Location) Dimming Switch with
Scene Control — Provides manual and remote ON/OFF switching and full range
dimming for larger incandescent and magnetic low-voltage lighting loads such as
chandeliers and multiple high-hats. Provides scene control capability when used with
DHC Scene Controller Cat. No. HCCS7-10W (backward compatible with
16400/16450-S and 16400/16450-SD units). Also provides multi-station manual and
remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-1
Multi-Remote Unit. Equipped with Intellisense (gated automatic gain control) for
outstanding performance and reliability.
Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE
LIGHTING commands. Preset feature turns lights ON at last selected brightness
level. Soft ON/Fade OFF feature provides eye-pleasing effect and extended bulb life.
Protected memory maintains lighting level during minor power fluctuations. Wires
easily into standard wall box. Neutral connection not required for incandescent loads. HCM10-1SW
Packed with Ivory and White Rocker and Frame Kits. Kits for other colors must be
purchased separately (See Chart).
Rated: 120V AC 60Hz, 1000W Incandescent,1000VA Magnetic Low-Voltage Lighting
HCM10-1SW, HCM06-1SW in 80301-W
Single-Pole (One Location) or 3-Way (Multi-Location) Dimming Switch with
Scene Control — Provides manual and remote ON/OFF switching and full range
dimming for incandescent and magnetic low-voltage lighting loads such as
chandeliers and multiple high-hats. Provides scene control capability when used with
DHC Scene Controller Cat. No. HCCS7-10W (backward compatible with
16400/16450-S and 16400/16450-SD units). Also provides multi-station manual and
remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-1
Multi-Remote Unit. Equipped with Intellisense (gated automatic gain control) for
outstanding performance and reliability.
Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE
LIGHTING commands. Preset feature turns lights ON at last selected brightness
level. Soft ON/Fade OFF feature provides eye-pleasing effect and extended bulb life.
Protected memory maintains lighting level during minor power fluctuations. Wires
easily into standard wall box. Neutral connection not required for incandescent loads. HCM06-1SW
Packed with Ivory and White Rocker and Frame Kits. Kits for other colors must be
purchased separately (See Chart).
Rated: 120V AC 60Hz, 600W Incandescent, 600VA Magnetic Low-Voltage Lighting
HCS10-1SW in 80301-W
SPECIFICATIONS & FEATURES
• Fit in standard wallboxes and replace
regular switches to provide manual and
remote ON/OFF switching, dimming (except
HCS10-1SW) and Scene Lighting Control
• Leviton’s exclusive IntellisenseTM virtually
eliminates signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to
add multi-location switching without resorting
to complicated and costly conventional wiring
means
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File # LR-54628)
• UL 244A Tested (and others where
appropriate)
Single-Pole (One Location) or 3-Way (Multi-Location) Switch with Scene
Control — Multi-Location Switch provides manual and remote ON/OFF switching
for incandescent, fluorescent and low-voltage lighting with magnetic ballasts such as
track lighting, chandeliers and multiple high-hats. Provides scene control capability
when used with DHC Scene Controller Cat. No. HCCS7-10W (backward compatible
with 16400/16450-S and 16400/16450-SD units). Also provides multi-station manual
and remote ON/OFF switching when used with Cat. No. MS00R-1 Multi-Remote
Unit. Equipped with Intellisense (gated automatic gain control) for outstanding
performance and reliability.
Responds to ON, OFF, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands. Wires easily into standard wall box. Neutral Connection Required. Packed
with Ivory and White Rocker and Frame Kits. Kits for other colors must be purchased
separately (See Chart).
HCS10-1SW
Rated: 10A 120V AC 60 Hz, 1200W Incandescent, 1200VA Fluorescent and
Magnetic Low-Voltage Lighting
COLOR
2.38 (60.5 mm)
Rocker and Frame Kits for HCM10-1SW & HCM06-1SW
—
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
2.66
(67.6 mm)
4.13 (104.9 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
Cat. No.
Mahogany
1.73 (43.9 mm)
1.39
(35.3 mm)
1.39
(35.3 mm)
DRK0D-1LI DRK0D-1LW DRK0D-1LG DRK0D-1LA DRK0D-1LE
Rocker and Frame Kits for HCS10-1SW
Cat. No.
Mahogany
—
B9
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
DRK0S-0LI DRK0S-0LW DRK0S-0LG DRK0S-0LA DRK0S-0LE
DIMMING SWITCH WITH SCENE CONTROL
Cat. Nos. HCM10-1SW & HCM06-1SW
SWITCH WITH SCENE CONTROL
Cat. No. HCS10-1SW
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building A Connected World
2.66
(67.6 mm)
2.38 (60.5 mm)
1.73 (43.9 mm)
4.13 (104.9 mm)
Colors available as indicated. See chart for Rocker
and Frame Color Change Kits (must be purchased
separately)
Home Automation Products
DHC Powerline Carrier Wall Switches
Scene-Capable Receiver with One-Button Programming — The new DHC Scene-Capable Receivers
provide one-button programming for scene and address capturing. All feature Leviton’s exclusive
Intellisense® to ensure top performance and reliability even when noise is present on the AC powerline.
Dimming Wall Switch Receivers provide manual and remote ON/OFF switching and full-range dimming for
incandescent and magnetic low-voltage lighting loads. The new HCS08-1TW Electronic Switch Receiver
(non-dimming) provides manual and remote ON/OFF switching for incandescent, magnetic low-voltage,
fluorescent and compact fluorescent lighting. The new HCP03-10W Plug-In Module allows remote ON/OFF
switching and full-range dimming for freestanding lamps, incorporating them into the lighting scenes. All
Switch Receivers come with a locator LED. Dimming models feature an LED brightness level display and a
preset feature that turns lights ON at the last selected brightness level. All -T Receivers allow 2-way status
tracking with the DHC Toscana™ Deluxe Programmer and new 2-way capable controllers when receivers
are changed locally.
Typical applications include home theaters, dining rooms, chandeliers, living rooms with multiple high-hats,
entranceways, and a wide range of mood lighting applications.
DESCRIPTION
CAT. NO.
RATING
COLOR
600 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming
and LED’s
HCM06-1DW
600W, 125V AC Incandescent,
600VA (450W) Magnetic LowVoltage Lighting
White (Ivory kit
included)
1000 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming
and LED’s
HCM10-1DW
1000W, 125V AC Incandescent,
1000VA (750W) Magnetic LowVoltage Lighting
White (Ivory kit
included)
600 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming,
2-Way Communication and LED’s
HCM06-1TW
600W, 125V AC Incandescent,
600VA (450W) Magnetic LowVoltage Lighting
White (Ivory kit
included)
1000 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming,
2-Way Communication and LED’s
HCM10-1TW
1000W, 125V AC Incandescent,
1000VA (750W) Magnetic LowVoltage Lighting
White (Ivory kit
included)
1000W/1000VA 8 Amp Scene-Capable Electronic HCS08-1TW
Switch Receiver (non-dimming) with One-Button
Programming and 2-Way Communication
8 Amp, 125V AC 1000W
Incandescent, 1000VA (750W)
Fluorescent & Magnetic LowVoltage Lighting
White (Ivory kit
included)
300 Watt Scene-Capable Dimming Plug-In
Lamp Module with One-Button Programming
300W, 125V AC Incandescent
White Only
HCP03-10W
All devices are UL Listed and CSA Certified.
Special Note: As with any dimmer, derating for multiple gang installations is required for Wall Switch Receivers.
• Use DHC Dimming Wall Switch Receivers with Leviton DPSPE-112 Power Extender to extend120V load
capacity to 2000W/2000VA for incandescent, magnetic low-voltage and Advance Mark X™ fluorescent
dimming ballasts.
• Use DHC Dimming Wall Switch Receivers with Leviton DPSPE-212 Power Extender to extend120V
load capacity to 2000W/2000VA for Mark VII™ and OSRAM Sylvania Quicktronic® Helios™ fluorescent
dimming ballasts.
Note: A Cat. No. HCA02-10E System Amplifier should be installed at the main panel in every DHC installation to
ensure adequate signal strength.
COLOR CHANGE KITS FOR WALL SWITCH RECEIVERS (ROCKER AND FRAME)
Compatible Color Change Kit
For Receiver:
Cat. No.
Mahogany
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
HCM06/10-1SW
—
DRK0D-1LI
DRK0D-1LW
DRK0D-1LG
DRK0D-1LA
DRK0D-1LE
HCM06/10/1DW
—
DRKDD-1LI
DRKDD-1LW
DRKDD-1LG
DRKDD-1LA
DRKDD-1LE
HCM06/10/1TW
—
DRKDD-1LI
DRKDD-1LW
DRKDD-1LG
DRKDD-1LA
DRKDD-1LE
HCS08-1TW
—
DRK0D-1LI
DRK0D-1LW
DRK0D-1LG
DRK0D-1LA
DRK0D-1LE
HCS10-1SW
—
DRK0S-1LI
DRK0S-1LW
DRK0S-1LG
DRK0S-1LA
DRK0S-1LE
HCM10-1DW in 80301-W
HCS08-1TW in 80301-W
SPECIFICATIONS & FEATURES
• New One Button Programming
• Provide Scene Control capability when used
with DHC Scene Controller HCCS7-10W and
HCCPG-1TW Toscana Programmer. Also
backward compatible with 16400/16450-S and
16400/16450-SD Scene Controllers
• Receivers provide multi-station manual and
remote On/Off switching and full-range dimming. Use MSOOR-10 Multi-Remote Unit
(wall switch SW and DW suffix ONLY)
• Soft On/Fade Off brightness levels allowing
extended bulb life
• Memory of last scene eliminating readjust settings — (HCS08-1TW and HCS10-1SW provide On/Off switch ONLY)
• Fits in standard wall boxes
• All devices come with Intellisense® technology
providing the utmost in reliability
• Protected memory during minor power fluctuations
• Programmable in increments for any number
of customized lighting scenes (except HCS081TW and HCS10-1SW)*
• LED locator light alongside rocker for convenience — on DW or TW suffix
• Packed with Ivory and White snap-on
rocker/frame kit; optional snap-on
rocker/frame color change kits sold separately.
See color change kit chart
* Requires use of HCCPG-1TW with Toscana
programmer
TESTING & CODE COMPLIANCE
• UL Listed to File No. E31373
• CSA Certified to File No. LR3413
• NOM Certified #057
COLOR
Colors available as indicated. See chart for Rocker and
Frame Kits (must be purchased separately)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B10
Home Automation Products
DHC Powerline Carrier Wall Switch Receivers
DESCRIPTION
CAT. NO.
Multi-Location Incandescent Dimming Switch — Provides multi-station
manual and remote switching and full-range dimming. When used with a 6294
Remote Switch equipped with Intellisense (gated automatic gain control) for
outstanding performance and reliability.
Responds to ON, OFF, DIM, BRIGHT, and ALL LIGHTS ON/ALL OFF commands. Preset feature turns lights ON at last selected brightness level. Soft
ON/Fade OFF feature provides eye-pleasing effect and extended bulb life.
Protected memory maintains lighting level during minor power fluctuations.
Built-in RFI filter. Wires easily into standard wall box. Packed with Ivory and
White Rocker and Frame. Kits for other colors must be purchased separately
(See Chart).
Rated: 120V AC 60Hz
500W max. Incandescent
60W min.
Note: To avoid overheating and possible damage to these units and other
equipment, do not use the Cat. No. 6383 to control a receptacle, fluorescent
lighting, motor-operated appliances or transformer-supplied loads. When
the 6383 is ganged with any other device, the 6383 should not be loaded
beyond 400W for a double-gang, or beyond 300W when three or more are
ganged together.
6383-WI in 80301-W
6383-WI
Single-Pole (One Location) Switch — Equipped with Intellisense (gated
automatic gain control) and provides manual and remote ON/OFF control. Can
be set to any of 256 DHC address codes to switch incandescent, inductive or
resistive loads where dimming is not required. Responds to ON, OFF, ALL
LIGHTS ON/ALL OFF commands. Wires easily into standard wall box using
terminal screws. Neutral Connection Required. Pilot light is ON when switch is
ON. Code wheels are located beneath rocker plate. Packed with Ivory and
White Rocker and Frame. Kits for other colors must be purchased
separately (See Chart).
Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive
6293-WI in 80301-W
SPECIFICATIONS & FEATURES
• Fit in standard wallboxes and replace regular
switches to provide manual and remote
ON/OFF switching of lighting and appliances.
6381-WI dimming switch rated for incandescent lighting only
• Leviton’s exclusive IntellisenseTM virtually
eliminates signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to
add multi-location switching without resorting
to complicated and costly conventional
wiring means
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 244A Tested (and others where
appropriate)
3-Way (Multi-Location) Switch — Equipped with Intellisense (gated
automatic gain control). Provides manual and remote ON/OFF control in multistation switching circuits when used in conjunction with one or more Cat. No.
6294 Remote Switches. The 6293 can be set to any of 256 DHC address
codes to switch incandescent, inductive or resistive loads where dimming is
not required. Responds to ON, OFF, ALL LIGHTS ON/ALL OFF commands.
Wires easily into standard wall box using terminal screws. Neutral Connection
Required. Pilot light is ON when switch is ON. Code wheels are located
beneath rocker plate. For proper operation, the total length of traveler wire
between Multi-Location Switch and Remote should not exceed 90 feet. Packed
with Ivory and White Rocker and Frame. Kits for other colors must be purchased separately (See Chart).
Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive
6291-WI
6293-WI
All devices are UL Listed and CSA Certified.
COLOR
Colors available as indicated. See chart for Rocker and
Frame Kits (must be purchased separately)
NEUTRAL
3.28 (83.3 mm)
2.70 (68.6 mm)
2.70 (68.6 mm)
LOAD
4.06 (103.1 mm)
CONTROL
4.10 (104.1 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
LINE
Rocker and Frame Kits for 6383 Switch
Cat. No.
Mahogany
6081-M
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
6081-I
6081-W
6081-GY
6081-A
—
Rocker and Frame Kits for 6291 and 6293 Switch
6091-M
B11
6091-I
6091-W
6091-GY
6091-A
1.73
(43.9 mm)
1.78
(45.2 mm)
SINGLE-POLE INCANDESCENT DIMMING SWITCH
Cat. No. 6383-WI
1.53
(38.9 mm)
1.42
(36.0 mm)
SINGLE POLE, 3-WAY SWITCH
Cat. Nos. 6291-WI, 6293-WI
—
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
DHC Powerline Carrier Wall Switch Receivers
DESCRIPTION
CAT. NO.
3-Way and 4-Way (Multi-Location) Remote Dimming Switch — This unit is
only for use as a remote switch with DHC Cat. Nos. HCM10-1SW, HCM061SW, and HCS10-1SW Multi-Location Switches with Scene Capability The
MS00R-1 provides ON/OFF and DIM/BRIGHT 3-Way, 4-Way and higher-level
control in conjunction with these units (Note: 16293 Switch does not provide
DIM/BRIGHT control). The MS00R-1 cannot be used for any other purpose in
the DHC network. Available in Ivory (-10I), White (-10W), and Almond (-10A).
Kits for other colors must be purchased separately (See Chart).
No Load Rating — For use with HCM10-1SW, HCM06-1SW, and HCS101SW Units with Scene Control Capability Only
MS00R-1
MS00R-1W in 80301-W
3-Way and 4-Way (Multi-Location) Remote Switch — For use with DHC
Cat. No. 6293 Multi-Location Switches as a remote switch. The 6294 provides
3-Way, 4-Way and higher-level control in conjunction with these units. It cannot
be used for any other purpose in the DHC network. The unit wires easily into
standard wall box using terminal screws. For proper operation, the total length
of traveler wire between Multi-Location Switch and Remote should not exceed
90 feet. Available in Mahogany (no dash), Ivory (-I), White (-W), Almond (-A)
and Gray (-GY). Specify color(s) when ordering, as snap-on cover and frame
kits cannot be used with the 6294.
No Load Rating — For use with 6293 Units Only
6294
Double Pole Wall Switch — Equipped with Intellisense (gated automatic gain
control). Provides local and remote ON/OFF control. Responds to ON/OFF
and ALL OFF commands from controllers. Can be set to any of the 256 DHC
address codes. Intended for control of pool pumps, air conditioning units, spa
heaters and pumps, and other large residential loads. Wire easily into any
standard wall box by means of six-inch leads. Available in Ivory only.
6371-I in 80301-I
Rated: 20A 2 HP 250V AC 60Hz
SPECIFICATIONS & FEATURES
6371-I
• Remote Units add multi-location capability to
dimmer and switch receivers
• Fit in standard wallboxes to replace regular
switches
• Leviton’s exclusive IntellisenseTM virtually
eliminates command signal problems due to
line noise
• 6371-I Heavy-duty appliance switch available
for automated control of heavy-duty loads
such as air conditioning and pool pumps
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
2.38 (60.5 mm)
1.73 (43.9 mm)
2.62 (66.5 mm)
4.06 (103.1 mm)
3.28 (83.3 mm)
4.13 (104.9 mm)
2.66
(67.6 mm)
1.39
(35.3 mm)
TESTING & CODE COMPLIANCE
1.42
(36.0 mm)
• UL Listed (File #E-66800)
• CSA Certified (File # LR-54628)
• UL 244A Tested (and others where
appropriate)
1.52
(38.7 mm)
REMOTE SWITCH
Cat. No. 6294
REMOTE DIMMING SWITCH
Cat. No. MS00R-10
COLOR
Colors available as listed
2.62 (66.5 mm)
2.75 (69.9 mm)
1.30
(33.0 mm)
1.70
(43.2 mm)
4.09 (103.9 mm)
HORSEPOWER
Cat. No 6371-I: 2 HP @ 250V 20A
.25
(6.4 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
1.40
(35.6 mm)
1.69
(42.9 mm)
DOUBLE POLE SWITCH
Cat. No. 6371-I
Rocker and Frame Kits for MS00R-10 Switch
Cat. No.
Mahogany
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
—
DRK0R-00I
DRK0R-00W
DRK0R-00G
DRK0R-00A
DRK0R-00E
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B12
Home Automation Products
DHC Powerline Carrier Receivers
DESCRIPTION
O
IT
M
O
EN
C
M
E
TA
D
R
Y
IVER
IT
CO
13
1
9
5
M
DE
HO
®
SA
®
LM
ODU
A
UN
IT
OF
F
E
US
E CO
DE
LE
SO
U
N
D
Y
A
EL
LY
LY R
N
N &
O
O
ER AY
ER D
N
U REL
SO
Scene-Capable Receiver with One-Button Programming — Provides
1-button programming through address capturing. Provides manual and
remote ON/OFF switching and remote full-range dimming for plug-in incandescent lamps. No wiring necessary; plugs into 15 Amp AC outlet. Allows local
control of any lamp plugged into it. Available in White (-W) only. Provides
Scene Control capability when used with DHC Scene Controller HCCS7-10W
and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward
compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers.
Equipped with Leviton's new Intellisense® advanced circuitry for the utmost in
reliability, even where electrical “noise” exists on the power line. Responds to
ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING
commands.
Rated: 120V 60Hz, 300W Incandescent
TE
ST
UN
UN
N
HCP03-10W
Universal Low Voltage Module — Almost any device operated at low
voltages can now be automated using the 6337. This receiver interfaces
between the low voltage device and the 120V AC wiring network. It receives
an ON or OFF command from DHC Transmitters and can operate sprinkler
systems, designated lighting, skylight closures, heating systems, garage door
openers and other lighting and motor loads. Simply connect LV wiring to the
screw terminal on the module and plug it into any 120V wall outlet.
In addition to switching contacts, the 6337 has a built-in alarm that can be set
to sound whenever the switch contacts are closed. The 6337 can be set to
operate the relay only, the alarm only, or both the relay and the alarm.
The 6337 can also be set for momentary operation so that the relay and/or the
alarm will be turned on for approximately two seconds in response to any ON
command. Does not respond to ALL LIGHTS ON or DIM/BRIGHT commands.
Rated: 120V 60Hz AC only. Contacts: 5A 12V DC,
100VA 30V DC Inductive
U
6337
CAT. NO.
6337
HCP03-10W
SPECIFICATIONS & FEATURES
• Universal Low Voltage Module can automate
devices operated at low voltages such as
sprinklers, skylights, and heating/AC systems
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 244A Tested (and others where
appropriate)
2.20
(55.9 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
TEST
1.95 (49.7 mm)
UNIT OFF
1
3.57 (90.7 mm)
1.55
(39.5 mm)
A
13
5
M
2.97 (75.3 mm)
•
•
•
•
E
9
UNIT CODE
HOUSE CODE
®
®
UNIVERSAL MODULE
1.15
(29.2 mm)
UNIVERSAL LOW VOLTAGE MODULE
Cat. No. 6337
B13
2.125
(54.0 mm)
PLUG IN LAMP RECEIVER
Cat. No. HCP03-1SW
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
DHC Powerline Carrier Receptacle Receivers
DESCRIPTION
CAT. NO.
Split Duplex Wall Receptacle — Equipped with Intellisense (gated automatic
gain control). Top outlet provides remote ON/OFF load control in response to
controller command signals. Bottom outlet is continuously live. Local control of
any light or appliance plugged into the controlled outlet can be achieved by
switching the load ON/OFF switch once or twice. Will not respond to ALL
LIGHTS ON command. Fits standard wall boxes and supplied with leads for
easy installation.
G
Rated: 15A 120V 60Hz AC only. NEMA 5-15R .
NEMA 5-15R
W
Duplex Wall Receptacle — Equipped with Intellisense (gated automatic gain
control). Same as 6227, but with both top and bottom outlets providing
ON/OFF control in response to controller command signals. Feed-through load
lead allows control of receptacles downstream. Will not respond to ALL
LIGHTS ON command. No local control available.
Rated: 15A 120V 60Hz AC only. NEMA 5-15R
6227-I
6227-W
6227-A
CONTROLLED
1
A
E
M
5
13
9
I
6227-W in 80301-W
6280-I
6280-W
6280-A
1
A
E
M
5
13
9
I
G
NEMA 5-15R
W
Single Wall Receptacle★— Equipped with Intellisense (gated automatic gain
control). Provides ON/OFF control. No local control available. Wires easily into
standard wallbox using supplied six-inch leads. Will not respond to ALL LIGHTS
ON command.
Rated: 20A 120V 60Hz AC only. NEMA 5-20R
NEMA 5-20R
G
All devices are UL Listed. Also CSA Certified except where indicated by★
1
A
E
M
5
13
9
I
G
W
Single Wall Receptacle★— Equipped with Intellisense (gated automatic gain
control). Provides ON/OFF control. No local control available. Wires easily into
standard wallbox using supplied six-inch leads. Will not respond to ALL
LIGHTS ON command.
Rated: 20A 250V 60Hz AC only. NEMA 6-20R
NEMA 6-20R
6296-I
6296-W
6280-W in 80301-W
SPECIFICATIONS & FEATURES
6298-I
6298-W
1
A
E
M
I
5
13
9
• Configurations for all commonly used
amperage/voltage house combinations
• Fit in standard wallboxes to provide remote
switching
• Leviton’s exclusive IIntellisenseTM virtually
eliminates switching problems due to line
noise
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-66800)
CSA Certified (File # LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
COLOR
E
I
13
5
9
1.30
(33.0 mm)
1.70
(43.2 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
2.62 (66.5 mm)
1
A
M
2.75 (69.9 mm)
CONTROLLED
4.09 (103.9 mm)
Basic Cat. No. denotes Brown. For other colors add
suffix to cat. nos. as follows: Ivory (-I), White (-W),
Almond (-A).
.25
(6.4 mm)
1.40
(35.6 mm)
1.69
(42.9 mm)
WALL RECEPTACLE
Cat. No. 6227
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B14
Home Automation Products
DHC Powerline Carrier Receiver Modules
DESCRIPTION
CAT. NO.
2000 Watt Dimmer Module — Full range dimming for up to 2,000 watt lighting
loads. Unit is surface mounted to control entire circuits or selected incandescent,
tungsten halogen (quartz iodine) or low voltage loads. Responds to ALL LIGHTS
ON/ALL OFF, ON, OFF, DIM/BRIGHTEN commands from DHC transmitters.
Housed in mounting box with terminal strip wiring.
Rated: 2000W, 2000VA, 120V 60Hz AC only.
6290
6290
Fixture Relay Module — Can be mounted at either an incandescent or fluorescent fixture by means of adhesive strips. Responds to ON/OFF and ALL
LIGHTS ON/ALL OFF commands from controllers. Equipped with leads for
easy installation.
Rated: 15A 120V 60Hz AC only, incandescent, inductive, or resistive.
3
A
6375
Dimming Fixture Module — Can be mounted at an incandescent fixture by
means of adhesive strips. Responds to ON/OFF, DIM/BRIGHTEN and ALL
LIGHTS ON/ALL OFF commands from controllers. Equipped with leads for
easy installation.
Rated: 300W incandescent 120V 60Hz AC only.
3
A
6375
6376
All devices are UL Listed and CSA Certified.
SPECIFICATIONS & FEATURES
• Fixture modules provide direct control for fixtures where only remote control is necessary
• 2000 Watt Dimming Module controls heavy
loads, including entire circuits
• Plug-In Lamp Module adds convenience of
remote ON/OFF and DIM/BRIGHT DHC
switching capability to plug-in incandescent
lamps
• Backed by a Limited Two-Year Warranty
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
.75
(19.0 mm)
1.3
(53.3 mm)
2.100
(53.3 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
2.95 (74.9 mm)
•
•
•
•
8.0 (203.2 mm)
2.87
(73.0 mm)
10.0 (254.0 mm)
TESTING & CODE COMPLIANCE
2.87
(73.0 mm)
1.25 (31.8 mm)
BLACK
9.50 (241.3 mm)
2000 WATT DIMMER MODULE
Cat. No. 6290
B15
BLUE
WHITE
FIXTURE RELAY MODULE
Cat. No. 6375
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
DHC Powerline Carrier Couplers and Filters
DESCRIPTION
CAT. NO.
Noise Block — The 6287 is designed for use with DHC switch modules that
include a means for connection to neutral. This device may be wired on the
LOAD side of a DHC switch module (except 6383), or on the LINE side of any
fixture using an electronic ballast, a low-voltage ballast, or any noise-generating
source that does not require more than 5A 120V AC. The 6287 prevents
interference generated by fixture components from interfering with DHC signals.
Rated: 5A 120V 60Hz AC only.
6287
Plug-in Noise Filter — electrical appliances may generate “noise” that could
interfere with proper signal transmission. When the offending appliance is isolated and plugged into the 6288 Noise Filter, which is in turn plugged into a
receptacle, stray noise is filtered out, ensuring a clear signal. Color: Brown.
Rated: 5A 120V 60Hz AC only.
6287
6288
In-Line Noise Reducer — the 6289 Noise Reducer filters electrical “noise”
and signals with frequencies above and below the 121 kHz signal. The 6289
may be installed at the “noise” or signal source or at the module affected by the
interference. Depending on the source of the interference, the 6289 may be
wired phase to neutral or phase to phase.
6288
6289
DHC Powerline Carrier Test Equipment
DESCRIPTION
CAT. NO.
Signal Strength Indicator — Measures command signal strength at individual
module locations. Minimum signal strength required for proper DHC Powerline
Carrier component operation is 100mV. For use with 6385 Signal Strength
Indicator.
6386
6386
2.92 (74.2 mm)
All devices are UL Listed only, not CSA Certified.
5 AMP BLOCK
CAT. NO. 6287
BLACK LOAD
6287
BLACK HOT L
1.43
(36.2 mm)
WHITE NEUTRAL
U® L
LISTED
898F APPLIANCE CONTROL
1.85 (46.9 mm)
NOISE BLOCK—Cat. No. 6287
PLUG-IN NOISE FILTER—Cat. No. 6288
1.17
(29.7 mm)
1.58 (40.1 mm)
R
SPECIFICATIONS & FEATURES
2.60 (66.0 mm)
IN-LINE NOISE REDUCER—Cat. No. 6289
• These devices are designed to eliminate
interference from appliances, electronic
ballasts and home electronics in order to
insure top performance from DHC systems
• Backed by a Limited Two-Year Warranty
Signal Strength Indicator
• Signal strength testing equipment used to
ensure proper operation of DHC system
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
• NOM Certified (#057)
• UL Listed (E-66800)
Signal Strength Indicator
• UL Listed (File #E-66800)
• NOM Certified (#057)
• UL 224A Tested (and others as appropriate)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B16
How To Use This Catalog
This edition of the Leviton Wiring Device Catalog has been re-designed to help you find the device you’re seeking in the quickest and
easiest way possible. To achieve this, each Section (A, B, C, etc.) has been divided into three distinct portions in the following
sequence — Industrial Specification Grade first, Commercial Specification Grade second, Residential Grade third — and grouped
according to their amperage and voltage, lowest to highest. (Some product classes may have slight differences.) If you need to place
an order for any quantity of 15 Amp, 125 Volt, Industrial Specification Grade duplex receptacles with back and side wiring, you would
begin your search for the right Leviton product with the Table of Contents. Here you’ll see that all receptacles are listed in Section D.
Turning to Section D, you’ll find that product descriptions now lead off each listing, so that you’ll be able to understand what the device
is about, functionally, in relation to your needs. Product description, in turn, is followed by Amps and catalog numbers for ordering purposes. To assist you further, such helpful highlights as Specifications & Features, Testing & Code Compliance, Color listing, Material
Characteristics, color photos and dimensional drawings virtually fill each page. Four-color photographs have been added throughout
the catalog to provide you with an enhanced view of the Leviton product line.
Any page in this D-503 Catalog can be used as a specificer sheet or as part of a presentation; and any page can be clearly faxed to
customers and prospects. Product classes may also be pinpointed in the Quick Reference Guide following the Table of Contents. After
turning to the proper page, you would locate the catalog number for the item that corresponds to your needs, along with basic information about similar items. Wiring diagrams, NEMA Configuration Charts, Electrical Industry Definitions, ANSI Architectural Symbols, and
other related information can be found in the Technical Section (T). Specific product catalog numbers are listed in the exhaustive index
at the back of the catalog.
A
Straight Blade Receptacles
D
E
Back and Side Wired (Basic Cat. No. Denotes Brown Device*)
DESCRIPTION
B
CAT. NO./COLOR
15A/125V
C
• Impact-resistant thermoplastic nylon
cover and body
• Smooth face does not collect dirt
• Four corner latches securely fasten face
• Locked-in mounting strap
• Large, triple-wipe, brass “T” contacts for
superior contact and conductivity
• Back and side-wiring options
W
6-15R
5-20R
G
6-20R
G—
Duplex Receptacle,
1 Pce. Brass Strap
5262A
I, W, GY
—
5362A
I, W, GY
Duplex Receptacle,
Steel Strap
5262
I, W, GY, R, E
5662
I, A
5362
I, W, GY, R, E
5462
I, A
Single Receptacle
5261
I, W, GY
5661
I
5361
I, W, GY, A
5461
I, A
5252
I, W, GY, R, E,
CAT. NO./COLOR
15A/125V
—
Duplex Receptacle
DESCRIPTION
Duplex Receptacle
5242
I, W, GY, R
—
5342
I, W, GY, R
—
Single Receptacle
5251
I
5651
I
5351
I
—
HSlim Design
SPECIFICATIONS & FEATURES
G
W
G
G
5-15R
5262-I
F
CAT. NO./COLOR CAT. NO./COLOR CAT. NO./COLOR
15A/250V
20A/125V
20A/250V
5352
—
I, W, GY, R, E,
CAT. NO./COLOR CAT. NO./COLOR CAT. NO./COLOR
15A/250V
20A/125V
20A/250V
I
1.09 (27.7 mm)
K
1.56 (39.6 mm)
3.28 (83.3 mm)
2.38 (60.3 mm)
4.06 (103.2 mm)
4.06 (103.2 mm)
J
3.27 (83.1 mm)
• UL Listed 498 (UL File #13399); UL
Federal Specification WC-596
• CSA Certified where applicable
(CSA File #LR-406)
• NOM Certified (#057)
• Backed by a Limited 10-Year Warranty
2.78 (70.6 mm)
TESTING & CODE COMPLIANCE
*COLOR
Basic Cat. Nos. shown above denote Brown
color device. For other color selections, add
suffix to the catalog number as follows: Ivory
(-I), White (-W), Red (-R), Gray (-GY).
MATERIAL CHARACTERISTICS
Environmental: Flammability, Rated V2
0.84 (21.4 mm)
BACK & SIDE WIRED
Cat. No. 5252
1.31 (33.3 mm)
1.06 (27.0 mm)
SINGLE RECEPTACLE
Cat. No. 5361
A Choose GRADE, if appropriate
E Select RATING and WIRING
I TESTING & CODE COMPLIANCE
B PHOTOGRAPH
F Check for NEMA CONFIGURATION
J COLOR LISTING
C Check for SINGLE or DUPLEX
G COLOR ABBREVIATIONS
H SPECIFICATIONS & FEATURES
K DIMENSIONAL ILLUSTRATIONS
D Find AMPERAGE
B17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement