seatIng - Invacare
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(888) 443-6818
Fax: (888) 443-6834
I n v a c a r e ® m at r x ®
s e at i n g
SEATING SERIES
series
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
Motion Concepts
www.motionconcepts.com
USA
700 Ensminger Rd., Suite 112
Tonawanda, NY 14150
(888) 443-6818
Fax: (888) 443-6834
Canada
84 Citation Dr., Unit 1-7
Concord, ON L4K 3C1
(866) 748-7943
(905)-695-0134
Fax: 905-695-0138
For more information on Invacare® Matrx® Seating
Series Products visit
www.invacare.com/Matrx
Specifications are subject
to change without
notification.
Molly (pictured above), was injured in 2009 and is a single mother of two young, active boys. She works part-time as an estimator
at a high-end construction company and is also an active member of her church. Most importantly, however, Molly stays busy as a
full-time mom, participating in and enjoying extracurricular activities with her sons. As a prior competitive swimmer and runner, she
also takes advantage of every opportunity to participate in accessible sporting events, including water skiing, surfing and biking.
Allen (MX1 Back Model, front cover and page 04) is truly an example of hard work paying off. He is currently employed full time
as a Sales Manager, and also works with various companies in the wheelchair industry as a Relationship Manager. When Allen is
not working hard in his day jobs, he is spreading smiles at local comedy clubs. He performed “stand up” for the last three years,
pursuing the adrenaline rush that he once enjoyed as a semi-professional snowboarder. Understanding that giving time is the
greatest gift of all, Allen (with best friend Murphy – also pictured) spends one night every week at Rady’s Children’s hospital in San
Diego running a playroom for patients. He received “the Golden Pin” award for his 5+ years of volunteering.
© 2012
Invacare Corporation.
All rights reserved.
Trademarks are
identified by the symbols
™ and ®. All trademarks
are owned by or licensed to
Invacare Corporation unless
otherwise noted. Otto Bock
is a trademark of Otto Bock
Orthopaedische Industrie
GmBh & Co. Matrx is a
registered trademark of
Motion Concepts. Dartex
is a registered trademark
of Dartex Coatings Ltd.
Fusion 16 is a trademark
of Sun Components, a
division of HB Performance
Systems, Inc. Ultra-Fresh
is a trademark of Thomson
Research Associates.
Form No. 10-106
Rev. 08/12
120235
With the number of new seating and positioning products available today, it is only natural to choose the best known products.
Invacare Corporation and Motion Concepts have joined forces and have combined product portfolios to offer the Invacare Matrx
Seating Series- simple and yet highly effective solutions to meet the widest range of user needs. This catalog is the source for
the Invacare Matrx Seating Series.
Invacare is committed to providing products that exceed expectations. As the landscape of seating changes, Invacare’s
dedication to innovation, quality and, most of all, comfort will stay the same.
SEATING SERIES
I n v a c a r e ® m at r x ®
S e at i n g
I n v a c a r e ® m at r x ®
series
S e at i n g s e r i e s
Ta b l e o f c o n t e n t s
HCPCS
Codes
Description
Invacare Matrx MX1 Back
E2615
04
Invacare Matrx Elite Back
E2620
06
Invacare Matrx Elite Deep Back E2620
08
®
Invacare Matrx PB Back
E2615/E2616
10
Invacare Matrx PB Deep Back
E2615/E2616
12
®
®
Invacare Matrx Easy Set Hardware
®
®
Invacare Matrx Back Specifications
®
®
14
16
Invacare® Matrx® Seat Cushions
Invacare® Matrx® Vi Cushion
E2607/E260818
Invacare® Matrx® Kid*ab*ra Vi Cushion
E260719
Invacare Matrx Flovair Cushion
E2607/E260820
Invacare Matrx
E2605/E260622
®
®
®
®
™
PS Cushion
Invacare Matrx Stabilite Cushion
E2605/E260624
Invacare Matrx Flo-tech Cushion
E2622/E262326
Invacare Matrx Cushion Specifications
28
®
®
®
®
®
™
™
®
Invacare® Matrx® General Use Back Supports, Seat Cushions and Accessories
Invacare® Absolute™ Cushion
E260130
Invacare Single Density Cushion
E2601/E260230
Invacare® Comfort-Mate Extra Cushion
E2603/E260430
Invacare® Versair™ Back
E2611/E261231
Invacare® Matrx® Genera Back E261131
Invacare Matrx Accessories
32
®
®
E2624
E2625
General Use
Wheelchair Seat
Cushion,
Width Less Than 22",
Any Depth
Positioning Wheelchair Seat
Cushion, Width Less Than
22", Any Depth
Positioning Wheelchair
Seat Cushion, Width 22"
or Greater, Any Depth
Skin Protection &
Positioning Wheelchair
Seat Cushion,
Width Less Than 22",
Any Depth
Skin Protection &
Positioning Wheelchair
Seat Cushion,
Width 22" or Greater,
Any Depth
Adjustable Skin Protection
Wheelchair Seat Cushion,
Width Less Than 22", Any
Depth
Adjustable Skin Protection
Wheelchair Seat Cushion,
Width 22" or Greater, Any
Depth
Adjustable Skin
Protection & Positioning
Wheelchair Seat
Cushion, Width Less
Than 22", Any Depth
Adjustable Skin
Protection & Positioning
Wheelchair Seat
Cushion, Width 22" or
Greater, Any Depth
Not Specified
Not Specified
Spinal Cord Injury (paraplegia, quadriplegia), Other
Spinal Cord Disease,
Multiple Sclerosis, Cerebral
Palsy, Amyotrophic Lateral
Sclerosis, Post Polio,
Traumatic Brain Injury, Spina
Bifida, Childhood Cerebral
Degeneration, Alzheimer's
Disease, Parkinson's
Disease, Hemiplegia,
Huntington’s chorea,
Idiopathic torsion dystonia,
Athetoid Cerebral Palsy,
Transverse myelitis
Spinal Cord Injury (paraplegia, quadriplegia), Other
Spinal Cord Disease,
Multiple Sclerosis, Cerebral
Palsy, Amyotrophic Lateral
Sclerosis, Post Polio,
Traumatic Brain Injury, Spina
Bifida, Childhood Cerebral
Degeneration, Alzheimer's
Disease, Parkinson's
Disease, Hemiplegia,
Huntington’s chorea,
Idiopathic torsion dystonia,
Athetoid Cerebral Palsy,
Transverse myelitis
Spinal Cord Injury (paraplegia, quadriplegia), Cerebral
Palsy, Paralysis, Post
Polio, Amyotrophic Lateral
Sclerosis, Monoplegia of
Lower Limb, Hemiplegia,
Muscular Dystrophy,
Alzhemier’s Disease, Spina
Bifida, Multiple Sclerosis,
Traumatic amputation of
leg(s), Osteogenesis imperfecta, Transverse myelitis
Spinal Cord Injury
(paraplegia, quadriplegia), Cerebral Palsy,
Paralysis, Post Polio,
Amyotrophic Lateral
Sclerosis, Monoplegia of
Lower Limb, Hemiplegia,
Muscular Dystrophy,
Alzhemier’s Disease,
Spina Bifida, Multiple
Sclerosis, Traumatic
amputation of leg(s),
Osteogenesis imperfecta,
Transverse myelitis
Spinal Cord Injury
(paraplegia, quadriplegia), Other Spinal
Cord Disease, Multiple
Sclerosis, Cerebral Palsy,
Post Polio, Traumatic
Brain Injury, Spina Bifida,
Amyotrophic Lateral
Sclerosis, Alzheimer's
Disease, Parkinson's
Disease, †Monoplegia of
Lower Limb, †Hemiplegia,
†
Muscular Dystrophy
Spinal Cord Injury
(paraplegia, quadriplegia), Other
Spinal Cord Disease,
Multiple Sclerosis,
Cerebral Palsy, Post
Polio, Traumatic Brain
Injury, Spina Bifida,
Amyotrophic Lateral
Sclerosis, Alzheimer's
Disease, Parkinson's
Disease, †Monoplegia
of Lower Limb,
†
Hemiplegia,
†
Muscular Dystrophy
Spinal Cord Injury (paraplegia, quadriplegia), Other
Spinal Cord Disease,
Multiple Sclerosis, Cerebral
Palsy, Amyotrophic Lateral
Sclerosis, Post Polio,
Traumatic Brain Injury, Spina
Bifida, Childhood Cerebral
Degeneration, Alzheimer's
Disease, Parkinson's
Disease, Hemiplegia,
Huntington’s chorea,
Idiopathic torsion dystonia,
Athetoid Cerebral Palsy,
Transverse myelitis
Spinal Cord Injury (paraplegia, quadriplegia), Other
Spinal Cord Disease,
Multiple Sclerosis, Cerebral
Palsy, Amyotrophic Lateral
Sclerosis, Post Polio,
Traumatic Brain Injury, Spina
Bifida, Childhood Cerebral
Degeneration, Alzheimer's
Disease, Parkinson's
Disease, Hemiplegia,
Huntington’s chorea,
Idiopathic torsion dystonia,
Athetoid Cerebral Palsy,
Transverse myelitis
Spinal Cord Injury
(paraplegia, quadriplegia), Other Spinal
Cord Disease, Multiple
Sclerosis, Cerebral Palsy,
Post Polio, Traumatic
Brain Injury, Spina Bifida,
Amyotrophic Lateral
Sclerosis, Alzheimer's
Disease, Parkinson's
Disease, †Monoplegia of
Lower Limb, †Hemiplegia,
†
Muscular Dystrophy
Spinal Cord Injury
(paraplegia, quadriplegia), Other Spinal
Cord Disease, Multiple
Sclerosis, Cerebral Palsy,
Post Polio, Traumatic
Brain Injury, Spina Bifida,
Amyotrophic Lateral
Sclerosis, Alzheimer's
Disease, Parkinson's
Disease, †Monoplegia of
Lower Limb, †Hemiplegia,
†
Muscular Dystrophy
Invacare® Absolute™
Cushion
Invacare® Single
Density Cushion
Invacare® Comfort-Mate
Extra Cushion
Invacare® Comfort-Mate
Extra Cushion
Invacare® Matrx® Stabilite™
Cushion
Invacare® Matrx®
Stabilite™ Cushion
Invacare® Matrx® Flovair™ Invacare® Matrx® Flovair™
Gentle/Max Contour
Gentle/Max Contour
Cushion
Cushion
Invacare® Matrx® Flo-tech™
Cushion
Invacare® Matrx® Flo-tech™
Cushion
E2604
Invacare® Matrx® PS
Cushion
Invacare® Matrx® PS
Cushion
Invacare® Matrx® Vi
Cushion
Invacare® Single
Density Cushion
E2612
General Use Wheelchair Back Cushion, Width Less Than 22",
Any Height, Including Any Type Mounting Hardware
Not Specified
SEATING SERIES
2
E2606
Skin Protection Wheelchair
Seat Cushion, Width 22" or
Greater, Any Depth
E2611
Available Products
®
Available Products
®
®
HCPCS
Codes
Description
®
®
E2603
Invacare® Matrx®
Genera™ Back
Invacare® Versair™ Back
E2615
E2607
E2608
E2622
E2623
Invacare® Matrx® Vi
Cushion
E2616
E2620
General Use Wheelchair Back
Cushion, Width 22" or Greater,
Any Height, Including Any Type
Mounting Hardware
Positioning Wheelchair Back Cushion, Posterior-Lateral, Width
Less Than 22", Any Height, Including Any Type Mounting
Hardware
Positioning Wheelchair Back Cushion, Posterior-Lateral, Width
22" or Greater, Any Height, Including Any Type Mounting
Hardware
Positioning Wheelchair Back Cushion, Planar with Lateral Supports,
Width Less Than 22", Any Height, Including Any Type Mounting
Hardware
Not Specified
Spinal Cord Injury (paraplegia, quadriplegia), Cerebral
Palsy, Paralysis, Post Polio, Amyotrophic Lateral Sclerosis,
Monoplegia of Lower Limb, Hemiplegia, Muscular
Dystrophy, Alzhemier’s Disease, Spina Bifida, Multiple
Sclerosis, Traumatic amputation of legs(s) (complete/partial), Osteogenesis imperfecta, Transverse myelitis
Spinal Cord Injury (paraplegia, quadriplegia), Cerebral
Palsy, Paralysis, Post Polio, Amyotrophic Lateral Sclerosis,
Monoplegia of Lower Limb, Hemiplegia, Muscular
Dystrophy, Alzhemier’s Disease, Spina Bifida, Multiple
Sclerosis, Traumatic amputation of legs(s) (complete/partial), Osteogenesis imperfecta, Transverse myelitis
Spinal Cord Injury (paraplegia, quadriplegia), Cerebral Palsy,
Paralysis, Post Polio, Amyotrophic Lateral Sclerosis, Monoplegia
of Lower Limb, Hemiplegia, Muscular Dystrophy, Alzhemier’s
Disease, Spina Bifida, Multiple Sclerosis, Traumatic amputation of legs(s) (complete/partial), Osteogenesis imperfecta,
Transverse myelitis
Qualifying
Diagnosis
®
®
E2602
Qualifying Diagnosis
Invacare® Matrx® Back Supports ®
E2605
General Use
Skin Protection Wheelchair
Wheelchair Seat
Seat Cushion, Width Less
Cushion, Width 22" or Than 22", Any Depth
Greater, Any Depth
E2601
Invacare® Versair™ Back
Invacare® Matrx®
MX1 Back
Invacare® Matrx®
PB/ PB Deep Back
Invacare® Matrx®
PB/ PB Deep Back
Invacare® Matrx®
Elite Back
Invacare® Matrx®
Elite Deep Back
* Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare Program and should consult an attorney or other advisor to discuss specific situations in further detail. This information is subject to change without notice.
†
Qualifying diagnosis code requires additional provision for decubitis ulcer (707.03, 707.04, 707.05)
© 2012 Invacare Corporation. All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted. Specifications are subject to change without notification.
Form # 10-106 Rev. 08/12 120235 3
I n v a c a r e ® m at r x ®
MX 1
Back
The latest in back support technology combines aesthetic appeal with superior positioning and function. The full range of
patent-pending hardware options ensures optimal adjustment for the widest range of applications, while the lightweight
carbon fiber shell provides exceptional support and durability. The Invacare® Matrx® MX1 Back is designed for active
individuals who demand peak performance and great looks.
4
Features and Functional Benefits
Carbon Fiber Back Shell - Durable solid carbon fiber shell
provides controlled flex to reduce vibration. Contoured to
provide hip/trunk stability and enhance upper extremity
mobility and function. Very light weight and aesthetically
appealing
Cover - Breathable, attractive spacer mesh fabric. Cover and
foam overlap the shell edge to protect the user
Adjustable Sacral/Lumbar Support - Includes lumbo-sacral
support that is easily adjustable to meet individual needs
Mounting Hardware
Mono Mount (Patent Pending) - Attaches to wheelchair
rigidizer bar providing complete clearance from back canes for
optimal propulsion and reach. Fully angle adjustable, remains
securely fastened in desired position and included track
provides height adjustment. Fits rigidizer bars ¾"(19mm)
optional 7/8" (22mm) and 1" (25mm) band clamps available
Fixed Dual Mount (Patent Pending) - Attaches to wheelchair
back canes (requires tools for removal). Fits back canes 1"
(25mm) in diameter - optional ¾" (19mm) and 7/8" (22mm)
diameter band clamps available. Attractive, low profile
hardware with no sharp edges. Adjustable width to fit
wheelchairs 1" wide or 1" narrower than back width, providing
optimal fit and support to user*
Quick Release Dual Mount (Patent Pending) - Back cane
mount hardware with quick release tabs for easy removal
from wheelchair. Includes band clamps to fit ¾"(19mm), 7/8"
(22mm) or 1"(25mm) diameter back canes. Attractive, low
profile hardware and 2" adjustable width*
HCPCS Code: E2615
1
2
3
4
5
6
1. 3" Contour Depth
2. Mono Mount (Patent Pending)
3. Adjustable Sacral/Lumbar Support
4. Fixed Dual Mount (Patent Pending)
5. Optional Privacy Flap
6. Quick Release Dual Mount (Patent Pending)
Model #
Height Width Depth
Angle
Product
AdjustmentAdjustment Weight
IMX1
9", 12", 16"
1.9 lb. and up
250 lb. 2 Years
(Mono Mount)
Hardware Only)
1.7 lb. and up
(Dual Mount)
14", 15", 16"
17", 18"
2"*
(Dual Mount
Weight
Capacity
Limited
Warranty
30º range*
+/- 15º
*Limitation of depth/angle adjustment if used on chairs narrower than model width
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
5
I n v a c a r e ® m at r x ®
Elite
Back
The Invacare® Matrx® Elite Back is designed to provide precise orientation within the wheelchair for optimal postural support.
The attractive, lightweight design appeals to individuals with active lifestyles.
6
Features and Functional Benefits
Outer Cover - Oversized cover/foam for extra comfort and skin
protection. Moisture resistant and breathable. Optional privacy
flap available
Hardware - “Easy Set” hardware installs and adjusts in
minutes – adjustments can be made while individual is seated
in the wheelchair. Refer to pages 14/15 for additional hardware
options. Available upon request
Back Shell - Stylish, breathable and lightweight back shell.
Adjustable Lumbo-Sacral Support - Includes removable
positioning pad
Headrest Adapter - Mounts directly onto Invacare Matrx Elite
Back. Pre-drilled to accept headrest hardware. Available upon
request
Optional Lateral Supports - Fixed - 2.5" of vertical adjustment
on back pan. Mounts inside back shell without interfering with
depth/angle adjustment. Available in standard 5"H x 7.5"L and
pediatric 3"H x 5.5"L sizes
Offset Fixed - Provides an additional 3" of vertical position
(higher or lower) relative to mounting slots. Available 5"H x 7.5"L
Swing-Away - ­­­­2.5" of vertical adjustment on back pan. ­­­­Mounts
inside back shell without interfering w/depth/angle adjustment
­­­­Easy push button release, 4 pad sizes (see below)
Offset Swing-Away - Provides an additional 3" of vertical
position (higher or lower). Mounts
­­­­
inside back shell without
interfering with depth/angle adjustment. Easy
­­­­
push button
release, 4 pad sizes (see below)
Lateral pads For Swing away laterals - XS: 3.25" high x 4.25"
long, S: 3.5" high x 5.25" long, M: 3.75" high x 5.75" long, L:
4.25" high x 6.5" long
HCPCS Code: E2620
1
2
3
4
5
6
1. 3" Contour Depth
2. Fixed Lateral Pads
3. Offset Fixed Lateral Pads
4. Swing Away
5. Offset Swing Away
6. Headrest Adapter Available
Model #
Height Width Depth
Angle
Product
AdjustmentAdjustment Weight
PBE
10", 12", 14"*
12" - 20"
4"***
40º range*** 1.7 lb. and up
16", 18", 20"**
(2" in front or
+/- 20°
behind back canes)
Weight
Capacity
300 lb.
Limited
Warranty
2 Years
* 14" height only available in 12", 13" and 14" widths
** Optional Full Back Style (No scapular cutout) available in 20" heights in widths 16-20"
***Limitation of depth/angle adjustment if used on chairs narrower than model width
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
7
I n v a c a r e ® m at r x ®
Elite deep
Back
The Invacare® Matrx® Elite Deep Back is designed with lateral supports to provide optimal trunk support while allowing
clearance for the shoulders and hips. The attractive, lightweight design appeals to individuals with active lifestyles.
8
Features and Functional Benefits
Outer Cover - Oversized cover/foam for extra comfort and
protection. Moisture resistant and breathable. Optional
privacy flap available
Hardware - “Easy Set” hardware installs and adjusts in
minutes – adjustments can be made while user is seated in
the wheelchair. Refer to pages 11/12 for additional hardware
options. Available upon request
Removable Lumbo-Sacral Support - Includes lumbo-sacral
support that is easily adjustable to meet individual's needs
Headrest adapter - Mounts directly onto Invacare Matrx Elite
Deep Back. Pre-drilled to accept headrest hardware. Available in 3 sizes. Available upon request
Back Shell - Stylish, breathable and lightweight contoured
back shell provides exceptional lateral trunk support
HCPCS Code: E2620
1
2
3
4
1. 6" Contour Depth
2. Adjustable Sacral/Lumbar Support
3. Headrest Adapter (3 sizes available)
4. Optional Privacy Flap
Model #
Height Width Depth
Angle
Product
AdjustmentAdjustment Weight
Weight
Capacity
Limited
Warranty
EDB
12", 16", 18", 20" 14" - 20"
4"*
40º range*
3 lb. and up
300 lb.
2 Years
1" increments (2" in front or
+/- 20°
behind back canes)
* Limitation of depth/angle adjustment if used on chairs narrower than model width
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
9
I n v a c a r e ® m at r x ®
PB
Back
The Invacare® Matrx® PB Back is contoured to provide midline support and positioning. The extensive range of sizes provides
exceptional support and comfort for a variety of individuals.
10
Foam - Molded foam wraps around shell for maximum
comfort and protection. Foam attaches to back shell via hook
and loop strips for easy replacement
Visco Foam Upgrade - Laminate of .5" high resilient foam
and .625" Visco Foam. Available on Invacare Matrx PB and
Elite Backs. Molded foam is not available on Invacare Matrx
PB Back with this option
Outer Cover - Moisture resistant and breathable. Available in
black or Kid*ab*ra print
Removable Lumbo-Sacral Support - Includes lumbo-sacral
support that is easily adjustable to meet individual's needs
Hardware - “Easy Set” hardware is easily installed and
adjusted in minutes – adjustments can be made while
individual is seated in the wheelchair. Refer to pages 11/12
for additional hardware options (Available upon request)
Foam-in-Place Kit - Individually molded insert produced in
minutes with user seated in back. Optional high stretch cover
Features and Functional Benefits
available
Privacy Flap - Optional privacy flap is available
Back Shell - Contoured shell provides exceptional midline
support and positioning. Durable, lightweight ABS back shell
includes built-in plate for headrest attachment
HCPCS Code: E2615/E2616
1
2
3
4
5
6
1. 5" Contour Depth
2. Kid*ab*ra Fabric Optional
3. Privacy Flap
4. Foam-in-Place Kit*
5. Visco Foam Upgrade
6. Adjustable Sacral/Lumbar Support
Model #
Height Width Depth
Angle
Product
AdjustmentAdjustment Weight
Weight
Capacity
Limited
Warranty
300 lb. 2 Years
HDB (Heavy-Duty)
16", 20"
20", 22", 24"
4"**
40º range** 6 lb. and up
500 lb.
(2" in front or
behind)
2 Years
HDBxW16 (Extra Wide)
16", 20"
21", 23", 25"-30"
4"**
40º range** 6 lb. and up
500 lb. HDBxW20 (Extra Wide)
(2" in front or
behind)
2 Years
MPB (Standard)
12", 16", 20"
14", 16", 17"
4"**
40º range** 2.8 lb. and up
18", 20"
(2" in front or
behind)
*The optional high stretch cover is recommended when using Foam in Place kit
** Limitation of depth/angle adjustment if used on chairs narrower than model width
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
11
I n v a c a r e ® m at r x ®
pb deep
Back
The Invacare® Matrx® PB Deep Back is contoured to provide increased midline support and positioning. The extensive
range of sizes provides exceptional comfort and support for a wide range of individuals with moderate to high lateral trunk
positioning needs.
12
Features and Functional Benefits
Foam - Molded foam wraps around shell for maximum comfort and protection. Foam attaches to back shell via hook and loop
strips for easy replacement
Outer Cover - Moisture resistant and breathable. Available in black or Kid*ab*ra print. Optional privacy flap is available
Hardware - “Easy Set” hardware is easily installed and adjusted in minutes – adjustments can be made while user is seated
in the wheelchair. Refer to Easy Set Hardware
Back Shell - Contoured shell provides exceptional midline support and positioning. Durable, lightweight ABS back shell
includes built-in plate for headrest attachment
Adjustable Sacral/Lumbar Support - Includes lumbo-sacral support that is easily adjustable to meet individual's needs
Foam-in-Place Kit - Individually molded insert produced in minutes with user seated in back. Optional high stretch cover
available
Visco Foam Upgrade - Laminate of .5" high resilient foam and .625" Visco Foam. Available on Invacare Matrx PB and Elite
Backs. Molded foam is not available on Invacare Matrx PB Deep Back with this option
HCPCS Code: E2615/E2616
1
2
3
4
5
6
1. 7" Contour Depth
2. Kid*ab*ra Fabric Optional
3. Privacy Flap
4. Foam-in-Place Kit
5. Visco Foam Upgrade
6. Adjustable Sacral/Lumbar Support
Model #
Height Width Depth
Angle
Product
AdjustmentAdjustment Weight
Weight
Capacity
Limited
Warranty
300 lb. 2 Years
DHD (Heavy-Duty)
16", 20"
20", 22", 24"
4"
40º range
7 lb. and up
500 lb.
(2" in front or
behind)
2 Years
DHDxW16 (Extra Wide)
16", 20"
21”, 23”
4"
40º range
DHDxW20 (Extra Wide)
25" - 30"
(2" in front or
behind)
2 Years
PBD (Deep)
12", 16", 20"
14", 16", 17"
4"
40º range
18", 20"
(2" in front or
behind)
2.9 lb. and up
7 lb. and up
500 lb. 7 lb. and up
* Limitation of depth/angle adjustment if used on chairs narrower than model width
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
13
I n v a c a r e ® m at r x ®
E asy S e t h a r d wa r e
The Invacare® Matrx® Easy Set hardware is simple and easy to install, and all adjustments can be made with the
individual seated in the wheelchair.
Features and Functional Benefits
Quick release for easy removal/portability
Infinite adjustment of depth (4"), angle (40°) and rotation
Fits 3/4", 7/8" and 1" diameter back canes
Hardware to fit 1 1/8" diameter canes also available
Styles: The following styles of the Invacare Matrx
Backs are interchangeable on the Easy Set Hardware
1. Invacare ® Matrx ® Elite Back
2. Invacare ® Matrx ® Elite Deep Back
3. Invacare ® Matrx ® PB Back
4. Invacare ® Matrx ® PB Deep Back
20"
20"
18"
1
20"
16"
20"
16"
20"
14"
18"
12"
16"
20"
16"
20"
14"
12"
20"
1. Heights
The Easy Set hardware accommodates a wide range of back heights to
meet the support needs of the individual
12"
12"
10"
10"
10", 12", 14", 16", 18" & 20"
12", 16" & 20"
10", 12", 14", 16", 18" & 20"
2
12", 16" & 20"
30"
20"
12"
12" - 20"
14"
14" - 30"
30"
20"
12"
12" - 20"
3
14"
2. Widths
The Easy Set hardware fits back widths from 12"-30" to provide exact fit for
each individual
14" - 30"
a
b
c
d
3. Contour Depth
The Easy Set hardware accommodates all four back shell styles with four
choices of contour depths for appropriate midline support requirements
a. Invacare® Matrx® Elite Back - 3" Contour Depth
b. Invacare® Matrx® Elite Deep Back - 6" Contour Depth
c. Invacare® Matrx® PB Back - 5" Contour Depth
d. Invacare® Matrx® PB Deep Back - 7" Contour Depth
14
1
2
1. Depth
Adjusts 2" behind back canes
2. Depth
Adjusts 2" in front of back canes
3
4
3. Angle
40º range of anterior/posterior adjustment
4. Angle
40º range of anterior/posterior adjustment
1
1
2
2
Rotation
Back may be oriented to accommodate pelvic/trunk rotation
1. Standard Mounting Pins
Standard mounting pins included with all Invacare® Matrx® PB and Elite
backs allow the Invacare® Matrx PB® back to fit chairs 1" narrower or
same model width. Allows the Elite Back to fit chairs the same width
2. Longer Mounting Pins
Longer mounting pins included with all Invacare Matrx PB/Elite backs
allow the Invacare Matrx PB and Elite Backs to fit chairs 1" wider
3
4
3. Extended Mounting Pins
Extended mounting pins available for Invacare Matrx PB & Elite Backs
Allow the back to fit chairs up to 2" wider
(Not available on backs with greater than 300 lb weight capacity)
4. Extended Range Mounting Hardware Upgrade
Provides 1.75" of additional depth adjustment compared to the standard
mounting hardware. Available on all models of Posture Backs and Elite
Backs – Easy Set, Heavy-Duty or Fixed Space Saver hardware
5
6
5. Heavy Duty Easy Set Mounting Hardware
Standard with Heavy-Duty Posture Backs. Recommended for users over
300 lb., high tone or heavy use
6. Fixed Space Saver Mounting Hardware
Requires tools for back removal. Saves space for tighter width
applications. Fully adjustable. Recommended for power wheelchair
application. Available as a no charge option
7
8
7. Split Mounting Hardware
Provides clearance of mid back cane rigidizer bars. Also allows Invacare
Matrx Backs to mount without interference of cantilever armrests.
Available as a no charge option. Not recommended for Invacare Matrx
Backs wider than 20". (Not available on backs with greater than 300 lb.
weight capacity)
8. Extended Shear Reduction Mounting Hardware
Allows all Invacare Matrx backs to be mounted directly to Motion
Concepts TRx seating with Power Recline and ESR
15
I n v a c a r e ® m at r x ®
back
s p e c i f i c at i o n s
Invacare® Matrx® Elite/Elite Deep Back
Invacare® Matrx® Elite Back Support
Back Height 10", 12", 14"(available in 12", 13" and 14" widths), 16", 18", 20"
Width
12"
13"14"15"16" 17" 18" 19" 20"
A. Outer
9.75"
10.25"
12.5"
13.5"
14.5"
15.5"
16.5"
17.5"
18.5"
B. Inner
8.5"
9.5"
11.5"
12.5"
13.5"
14.5"
15.5"
16.5"
17.5"
C. Contour
3" 3"
3"
3"
3"
3"
3"
3"
3"
Invacare® Matrx® Elite Deep Back
Back Height
12", 16", 18", 20"
Width
14"
15"16"17"18"19"20"
A. Outer
13"
14"
B. Inner
11.5"
C. Contour
6" 6"6"6"6"6"6"
B
15"
16" 17"
18"
C
A
19"
12.5"13.5"14.5"15.5"16.5"17.5"
Depth Adjustment 4" (2" in front or behind back canes)
Angle Adjustment 40°
Product Weight 1.7 lb. and up (Standard), 3 lb. and up (Deep)
Weight Capacity 300 lb.
Limited Warranty 2 Years
C
B
A
Invacare® Matrx® PB/PB Deep Back
Invacare® Matrx® PB Back
Back Height 12", 16", 20"
Width
14" 16" 17" 18"
20"
A. Outer
11.75"
13.75"
14.75"
15.75"
17.75"
B. Inner
10.5"
12.5"
13.5"
14.5"
16.5"
C. Contour
5"
5"
5"
5"
5"
Invacare® Matrx® PB Deep Back
Back Height 12", 16", 20"
Width
14" 16"
17"18"20"
A. Outer
12"
14" 15"
B. Inner
12"
14"
15"
16"
18"
C. Contour
7"
7"
7"
7"
7"
17"
Depth Adjustment 4" (2" in front or behind back canes)
Angle Adjustment
40°
Product Weight 1.7 lb. and up (Standard), 3 lb. and up (Deep)
Weight Capacity 300 lb.
Limited Warranty 2 Years
B
A
C
19"
B
A
C
Invacare® Matrx® PB Heavy-Duty Back
16
Back Height 16", 20"
Width
20", 21"
22", 23"
24", 25"
26", 27"
28", 29"
30"
A. Outer
18.5"
20.5"
22.5"
24.5"
26.5"
28.5"
B. Inner
17.5"
19.5"
21.5"
23.5"
25.5"
27.5"
C. Contour
5"
5"
5"
5"
5"
5"
Depth Adjustment 4" (2" (in front or behind back canes)
Angle Adjustment 40°
Product Weight 6 lb. and up
Weight Capacity 500 lb.
Limited Warranty 2 Years
C
B
A
I n v a c a r e ® m at r x ®
back
s p e c i f i c at i o n s
Invacare® Matrx® PB Deep Heavy-Duty Back
Back Height 16", 20"
Width
20", 21"
A. Outer
19", 20
B. Inner
18.5", 19.5
C. Contour
7"
22", 23"
24", 25"
26", 27"
28", 29"
30"
21"
23"
25"
27"
29"
20.5"
7"
22.5"
24.5"
26.5"
28.5"
7"
7"
7" 7"
Depth Adjust 4" (2" in front or behind back canes)
Angle Adjust 40°
Product Weight 7 lb. and up
Weight Capacity 500 lb.
Limited Warranty 2 Years
B
A
C
A
Invacare Matrx MX1 Back
®
®
Back Height
9", 12", 16"
Width
14" 15" 16"17" 18"
A. Outer
13"
16" 17"
B. Inner
11.5"
12.5"
13.5"
14.5"
15.5"
C. Contour
3"
3"
3"
3"
3"
Depth Adjustment D
14"
15"
2" (Dual Mount Hardware only)
Angle Adjustment 30°
Product Weight 1.9 lb. and up
Weight Capacity 250 lb.
Limited Warranty 2 Years
B
E
C
B
A
17
I n v a c a r e ® m at r x ®
Vi
Cushion
The Invacare® Matrx® Vi Cushion is designed to provide skin protection and positioning for individuals at moderate to high
risk of skin breakdown. The unique three part foam construction targets skin protection where it is needed most, and features
excellent stability, support and comfort.
18
Bottom layer - Firm (ILD) High Resilient (HR) foam for
support and durability. Trochanteric shelf provides stability to
hips. Waterfall front edge. Rear radius for sacral support.
Features and Functional Benefits
Outer cover - Moisture resistant and breathable. Includes slip
resistant base, hook and loop fasteners, lifting strap. Available
in black and Kid*ab*ra print.
Drop Base - Includes built-in drop base, drop hooks, DuraClip
fasteners. Allows adjustment of seat angle.
Inner cover - Moisture resistant. Easily wipes clean. Zippered
cover allows access for cushion modifications.
Pelvic Obliquity Kit - Easily installed on all Invacare Matrx
Vi/Kid*ab*ra-Vi cushions/bases. Accommodates .5" or 1"
obliquities.
Top layer - Soft (ILD) High Resilient (HR) foam for optimal
comfort and support. Pre-ischial contour provides stability
to pelvis. Abductor/adductor contour promotes midline leg
positioning. Made with Ultra-Fresh™ for antibacterial and odor
protection.
Custom Modifications - Leg length discrepancies, width/
depth reductions. Foam, inner and outer covers modified to
your specifications.
Cushion Ridigizer - Lightweight, slim profile solid seat
insert. Contoured to eliminate “hammock effect” of sling
upholstery.
Visco foam insert - Molded visco-elastic foam ischial relief
insert. Anatomically targeted to ischial/sacral area. Provides
immersion to sensitive bony prominences.
HCPCS Code: E2607/E2608
1
2
3
4
5
1. Drop Base­­
2. Kid*ab*ra Fabric Standard on Pediatric Sizes
3. Custom Modifications
4. Cushion Ridgidizer
5. Pelvic Obliquity Kit
A
B
Model #
Width* Depth** Height at
Height at Leg
Adductor/AbductorTrough
KA-Vi
12" - 14"
12" - 14"
2.87"/2.75"
2"
Product
Weight
1.5 lb. and up
Weight
Capacity
150 lb.
Limited
Warranty
2 Years
MA(WWDD) -Vi
14", 16", 18"
15" - 20"
3.75"/3.25"
2.5"
3 lb. and up
300 lb. 2 Years
(Standard)
20", 22"
MA(WWDD) -Vi
18" - 30"
18" - 26"
3.75"/3.25"
2.5"
4 lb. and up
600 lb.
2 Years
(Heavy Duty)
* Actual width is 1/2" narrower than stated width
** Actual depth is 1 1/2" longer than stated depth
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
19
I n v a c a r e ® m at r x ®
F l o va i r ™
Cushion
The Invacare® Matrx® Flovair™ Cushion is designed to provide pelvic stability, leg positioning and pressure management
for users with postural asymmetry and skin integrity issues. The Invacare Matrx Flovair Cushion begins with the base for
comfort, stability and function. This hybrid cushion captures the stability of foam, the pressure redistribution of air and the
shear management of fluid.
20
Features and Functional Benefits
Outer cover - Moisture resistant and
breathable. Includes non-slip base, hook
and loop fasteners and a lifting strap.
Inner cover - Moisture resistant. Easily
wipes clean. Zippered cover allows access
for cushion modifications.
Fluid overlay - Works in tandem with the
Invacare® ThinAir™ bladder to maximize
surface area for optimal pressure
redistribution. Shear management as
the two layers work in harmony without
weight penalty. Compensates for different
body types as fluid/air layers envelop body
contours.
ThinAir bladder - Comfort layer assists in
redistributing peak pressures away from
bony prominences. Helps manage shear
forces.
additional comfort and support for those
sitting in a posterior pelvic tilt. Gentle or
max contour choices based on need for
gentle or high level of posture control
Positioning foam base - Waterfall front
edge. Soft foam allows immersion of
pelvis for comfort and stability. Medial and
lateral thigh supports facilitate positioning
and alignment of lower extremities.
Trochanter cutouts facilitate proper
pressure redistribution and comfort.
Firm foam inserts under the cutouts add
support. Posterior pelvic support provides
pelvic control that is required for stability
and function. Sacral cutout provides
Removable leg wedges - Allow lower
seat-to-floor height for foot propellers.
Accommodates limited hip flexion by
opening up seat-to-back angle.
Pelvic Obliquity Kit - Easily installed
on Invacare Matrx Flovair cushions.
Accommodates 0.5" or 1" obliquities.
Cushion Ridigizer - Lightweight, slim
profile solid seat insert. Contoured to
eliminate “hammock effect” of sling
upholstery.
HCPCS Code: E2607/E2608 (Gentle Contour/Max Contour)
1
2
3
4
1. Cushion Rigidizer
2. Custom Modifications*
3. Removable Leg Wedges
4. Pelvic Obliquity Kit
A
B
Model #
Width Depth** Height at
Height at Leg
Adductor/AbductorTrough
Product
Weight
Weight
Capacity
Limited
Warranty
ITFG
15" - 24"
15" - 22"
3.5"
2.88"
4.20 lb. and up 300/500 lb. 2 Years
(Gentle Contour)
ITFM
(Max Contour)
15" - 24"
15" - 22"
4.38"
2.88"
4.20 lb. and up 300/500 lb.
2 Years
* Modifications: Leg length cutouts: - 1" or 2": cutouts to accommodate leg length discrepancies
** Actual Depth is 1" longer than stated depth
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
21
I n v a c a r e ® m at r x ®
ps
Cushion
The Invacare® Matrx® PS Cushion is an exceptionally lightweight cushion designed to provide superior positioning, stability
and comfort. The design features an anatomically contoured shape with a unique waffled ischial relief recess and an
innovative reversible outer cover. It is a great choice for a very wide range of individual needs, including pediatric, geriatric,
bariatric and highly active.
22
Features and Functional Benefits
Reversible outer cover - Innovative reversible Dartex® outer
cover may be used smooth or fabric side out. Dartex® fabric is
moisture proof and breathable. Hook and loop fastener strips
Custom Modifications - Leg length discrepancies, width/
depth reductions. Foam, inner and outer covers modified to
your specifications
Inner cover - Moisture resistant. Easily wiped clean. Zippered
cover allows access for cushion modifications
Cushion Ridigizer - Lightweight, slim profile solid seat insert.
Contoured to eliminate “hammock effect” of sling upholstery
Cushion Foam - Durable high resilient foam prevents
"bottoming out". Anatomically molded shape for optimal
positioning & comfort. Rear radius for sacral support.
Waterfall front edge. Made with Ultra-Fresh™ for antibacterial
and odor protection
Pelvic Obliquity Kit - Easily installed on Invacare Matrx PS
cushions. Accommodates .5" or 1" obliquities
Ischial relief area - Waffled recess provides immersion of
bony prominences. Helps maintain pelvic position and prevent
sliding
HCPCS Code: E2605/E2606
1
2
3
4
1. Custom Modifications­­
2. Ischial Relief Area
3. Cushion Rigidizer
4. Pelvic Obliquity Kit
A
B
Model #
Width *
Depth** Height
Height at Leg
Abductor/AdductorTrough
Product
Weight
Weight
Capacity
Limited
Warranty
PS (Pediatric)
10", 12", 14" 10", 12", 14", 16" 3.75"/3.5"
2.5"
1 lb. and up
150 lb. 2 Years
PS (Standard)
16", 18", 20"
16", 18", 20"
4"/3.5"
2.5"
2 lb. and up
300 lb. 2 Years
PS (Heavy-Duty)
21" - 30"
16" - 30"
4"/3.5"
2.5"
7 lb. and up
600 lb. 2 Years
* Actual width is 1/2" narrower than stated width
** Actual Depth is 1" longer than stated depth
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
23
I n v a c a r e ® m at r x ®
s ta bi l i t e
Cushion
The Invacare® Matrx® Stabilite™ Cushion is developed to provide pelvic stability and leg positioning for individuals with
postural asymmetries. The Invacare Matrx Stabilite Cushion comes fitted with a patented Invacare® ThinAir™ bladder, a unique
comfort layer that assists in shear management. The Invacare Matrx Stabilite Cushion begins with the base for comfort,
stability and function.
24
Features and Functional Benefits
Outer cover - Moisture resistant and breathable. Includes non-slip base, hook and loop fasteners and a lifting strap
Inner cover - Moisture resistant, Easily wiped clean, Zippered cover allows access for cushion modifications
Invacare® ThinAir™ bladder - Comfort layer assists in redistributing peak pressures away from bony prominences. Helps
manage shear forces
Positioning foam base -Soft foam allows immersion of pelvis for comfort and stability. Medial and lateral thigh supports
facilitate positioning and alignment of lower extremities. Trochanter cutouts facilitate proper pressure redistribution and
comfort. Firm foam inserts under the cutouts add support. Posterior pelvic support provides pelvic control that is required for
stability and function. Sacral cutout provides additional comfort and support for those sitting in a posterior pelvic tilt. Waterfall
front edge
Cushion Rigidizer - Lightweight, slim profile solid seat insert.Contoured to eliminate “hammock effect” of sling upholstery
Removable Leg Wedges - Allow lower seat-to-floor height for foot propellers. Accommodate limited hip flexion and opens up
seat-to-back angle
Pelvic Obliquity Kit - Easily installed on Invacare Matrx Stabilite cushions. Accommodates 0.5" or 1" obliquities
HCPCS Code: E2605/E2606
1
2
3
4
1. Cushion Rigidizer
2. Custom Modifications
3. Removable Leg Wedges
4. Pelvic Obliquity Kit
A
B
Model #
Width* Depth** Height at
Height at Leg
Abductor/AdductorTrough
Product
Weight
Weight
Capacity
Limited
Warranty
ITSG
14" - 24"
14" - 22"
3.75"/3.75"
2.87"
3 lb. and up
300/500 lb. 2 Years
* Actual width is 1/2" narrower than stated width
** Actual Depth is 1" longer than stated depth
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
25
I n v a c a r e ® m at r x ®
flo-tech
Cushion
The Invacare® Matrx® Flo-tech™ Cushion uses a combination of molded foam and dual layer fluid sacs to provide the highest
level of skin protection for individuals with high risk of skin breakdown. The Fit Kit components are available to address
individual postural requirements.
26
Features and Functional Benefits
Outer cover - Moisture resistant and breathable. Includes
non-slip base, hook and loop fastener strips and a lifting strap.
Expandable cover facilitates use with Fit Kit components
Platilon liner - An additional layer of moisture protection
Fluid sac - Unique dual-layer fluid in ischial/sacral area to
help prevent bottoming out. Non-temperature sensitive fluid
resists freezing. No kneading or maintenance required
Foam base - High quality, comfortable, resilient foam
base. Molded in hook and loop fastener strips for secure
attachment of Fit Kit components. Pre-ischial contour,
trochanteric support and sacral support
Pelvic obliquity build-up - Accommodates obliquities up to
1". For correctable obliquities use under low side of pelvis and
for fixed obliquities use under high side of pelvis
Adductors - Front: provides increased adductor contour to
thighs. Rear: provides increased adductor contour to hips
Seat wedges - Increases degree of pre-ischial and contour
angle to help prevent sliding
Hemi wedge - May be used to provide increased support
to one lower extremity – useful for clients who use foot
propulsion or with hip flexion limitations
Fit Kit Components
Abductor - Small: provides .75" increased height of abductor
contour. Large: provides 2" increased height of abductor
contour
Tapered wedges - Accommodates mild pelvic rotation, mild
hip flexion discrepancies or increase adductor contour
Tapered wedges - Accommodate mild pelvic rotation, mild
hip flexion discrepancies or increase adductor contour
Fluid supplement - May be placed to provide pelvic obliquity
accommodation or increased sacral/ischial immersion
Fluid supplement - May be placed to provide pelvic obliquity
accommodation or increased sacral/ischial immersion
HCPCS Code: E2622/E2623
FIT KIT COMPONENTS:
1
9
2
8
3
7
4
5
6
1. Pelvic Obliquity Build-Up
2. Adductor (Rear)
3. Adductor (Front)
4. Abductor (Large)
5. Seat Wedges
6. Hemi Wedge
7. Abductor (Small)
8. Tapered Wedges
9. Fluid Supplement
A
B
Model #
Width Depth Height at
Height at Leg
Abductor/AdductorTrough
FT (Standard)
14" - 20"
14" - 21"
3.375"/3.375"
2.75"
Product
Weight
7.2 lb. and up
Weight
Capacity
300 lb. Limited
Warranty
3 Years
FT (Heavy-Duty)
20" - 24"
18", 20", 22" 3.375"/3.375"
2.75"
9.5 lb. and up
500 lb. 3 Years
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
27
I n v a c a r e ® m at r x ®
cushion
s p e c i f i c at i o n s
Invacare® Matrx® Vi Cushion
Invacare® Matrx® Stabilite™ Cushion
Seat Width
Seat Width 14" – 24"
18" – 30" Heavy-Duty
14", 16", 18", 20", 22" Standard
Seat Depth 14" – 22"
Seat Depth
Product Weight 3 lb. and up
18" – 26" Heavy-Duty
Weight Capacity
14" – 20" 300 lb.
Product Weight
3 lb. Standard
21" – 24" 500 lb.
4 lb. Heavy-Duty
Limited Warranty Weight Capacity
300 lb. Standard
600 lb. Heavy-Duty
Limited Warranty
2 Years
15" – 20" Standard
Invacare® Matrx® Kid*ab*ra Vi Cushion
Invacare® Matrx® Flo-tech™ Cushion
Seat Width
14" – 20" Standard
20" – 24" Heavy-Duty
Seat Width
12" – 14"
Seat Depth
14", 16" – 21" Standard
Seat Depth
12" – 14"
18", 20", 22" Heavy-Duty
Product Weight
1.5 lb. and up
Product Weight
7.2 lb. Standard
Weight Capacity
150 lb.
9.5 lb. Heavy-Duty
Limited Warranty
2 Years
Weight Capacity
300 lb. Standard
500 lb. Heavy-Duty
Limited Warranty
3 Years
Invacare® Matrx® Flovair™ Cushion (Gentle, Max)
Seat Width
15" – 24"
Seat Depth
15" – 22"
Product Weight
4.20 lb. and up
Weight Capacity
15" – 20" 300 lb.
21" – 24" 500 lb.
Limited Warranty
2 Years
Invacare® Matrx® PS Cushion
Seat Width
10", 12", 14" Pediatric
16", 18", 20" Standard
21"– 30" Heavy-Duty
Seat Depth
10", 12", 14", 16" Pediatric
16", 18", 20" Standard
21" – 30" Heavy-Duty
Product Weight
1 lb. Pediatric
2 lb. Standard
7 lb. Heavy-Duty
Weight Capacity
150 lb. Pediatric
300 lb. Standard
600 lb. Heavy-Duty
Limited Warranty
2 Years
* Actual cushion width is ½" narrower than stated size
** Actual cushion depth is 1" longer than stated size due to rear cushion radius
*** Actual cushion depth is 1½" longer than stated size due to rear cushion radius
28
2 Years
29
I n v a c a r e ® m at r x ®
G ENERAL USE
cushions and Backs
The Invacare® Absolute™ Cushion offers simple but comfortable solutions for
users with mild support and positioning needs. This cushion is designed to provide basic comfort using highly resilient foam and is intended for users who are
able to do their own weight shift for pressure relief
Features and Functional Benefits
Lightweight Molded Polyurethane foam - Provides comfort and durability
Gentle Contour - For comfort and centering in the seat
Shaped cushion bottom - Allows use of cushion on taut sling upholstery
Outer cover - Breathable water repellent cover to protect foam and keep the
consumer dry. Mesh fabric effectively dissipates heat and moisture
Non-slip bottom - Keeps cushion secure and in place
HCPCS Code: E2601
The Invacare® Single Density Cushion offers simple but comfortable solutions
for users with mild support and positioning needs. This cushion is designed
to provide basic comfort using highly resilient foam for pediatrics to geriatrics.
Available in an extensive range of sizes
Features and Functional Benefits
Lightweight contoured foam with deformation cut - Provides comfort and
stability to the individual
Outer cover - Durable water repellent cover to protect foam and keep the
consumer dry
HCPCS Code: E2601/E2602
The Invacare® Comfort-Mate Extra Cushion offers simple but comfortable
solutions for users with mild support and positioning needs. This cushion goes one
step further with a comfortable, molded design and a durable moisture-resistant
coating. Ideal for users who are able to do own weight shifts for pressure relief,
who need comfort, stability and gentle positioning
Features and Functional Benefits
Low profile, lightweight cushion - Designed for long-term sitting comfort and
easy lateral transfers
Molded dual-firmness polyurethane foam - Soft top layer provides exceptional
comfort and firmer bottom layer stabilizes and supports the pelvis
HCPCS Code: E2603/E2604
Contoured seating surface - Promotes neutral leg positioning while providing
gentle positioning
Beveled sides - Allows use with a drop seat
Moisture resistant coating - Seals and protects foam from moisture; easily
wipes clean
30
Outer cover - Breathable water repellent cover to keep the user cool and dry
The new adjustable tension Invacare® Versair™ Back is designed for positioning
and comfort, offering versatile and beneficial solutions for individual seating needs.
The Invacare Versair Back is lightweight and provides comfort and support with
optimal positioning when standard sling upholstery does not meet an individual's
need.
Features and Functional Benefits
Comfortable padded upholstery - Slim profile that does not sacrifice seat depth
Mesh upholstery - Wicks away heat and moisture for improved airflow between
user and the back and provides added comfort
Alternating 2" tension straps - Easy to adjust as needed to provide optimal
postural support and pelvic support/stability
HCPCS Code: E2611/E2612
Easy Mounting - Secure and easy fit around canes using hook and loop straps.
Additionally, the back easily folds with the chair for transport
The Invacare® Matrx® Genera™ Back provides postural stability, supportive
contour and comfort through a hard-shell back so that no individual needs to make
do with sling upholstery
Features and Functional Benefits
Outer cover - Attractive, water resistant and breathable cover, vinyl backed
Back shell - Sturdy contoured shell with 3" of contour depth, durable plated steel
hardware. Built-in T-nuts for headrest attachment
Hardware - Hardware adjusts to fit the chairs nominal width and 1" wider than back
model width. Provides 1" depth and 20° recline adjustability
Quick release hardware for easy removal
HCPCS Code: E2611
A
B
Model #
Width Depth Height at
Height at Leg
Adductor/AbductorTrough
Product
Weight
Weight
Capacity
Limited
Warranty
EC
16", 18", 20"
16", 18"
3.25"/2.25"
2"
2 lb. and up
250 lb. SD
10" - 24"
7" - 20"
1.5"/2.5"
2"
2 lb. and up
250 lb. 1 Year
CMEX
14" - 22"
14" - 20"
3.25"/2.25"
2"
2 lb. and up
250 lb. 2 Years
Weight
Capacity
Limited
Warranty
Model #
Height Width Depth
Angle
Product
AdjustmentAdjustment Weight
1 Year
VA1621R, VA1621T
16"-21"
15"-17", 17"-19"
N/A
N/A
2 lb. and up
300 lb.
2 Years
VA2126R, VA2126T
21"-26"
15"-17", 17"-19"
N/A
N/A
2 lb. and up
500 lb.
2 Years
GB
16", 20" 16", 18", 20"
1"
20"
3.7 lb. and up
300 lb.
1 Year
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program and should
consult an attorney or other advisor to discuss specific situations in further detail.
31
I n v a c a r e ® m at r x ®
accessories
32
Armpad Options
1. Multi-position arm pads
2
1
Soft, gel-like feel provides extra comfort and protection for arms
Highly durable skinned polyurethane resists cracking and peeling
Triple track extrusion allows adjustability of mounting position and attachment
location for other accessories
3" wide; desk length 10" or full length 14"
2. Ergonomic arm trough/hand pad kit
Molded, skinned polyurethane fits the natural arm curvature
Unique cut-out at elbow provides users with flexibility of various arm positions
Triple track extrusion allows a variety of mounting positions
Complete with flat hand pad or interfaces with other manufacturer’s hand pieces
4
3
3. Gel arm pads
Fabric covered polymer gel arm pads
Provides extra protection for highly sensitive arms
Available in 3 models: Std. Narrow: 2" wide x 12" long
Std. Wide: 3.5" wide x 12" long
Long Wide: 3.5" wide x 14" long
5
4. Multi-Axis Armrest Mount
Allows infinite adjustment of angle and rotation of arm pad
Interfaces with multi-position arm pad
5. Joystick Mounting Bar for Multi-Axis Armrest Mount
Available for 3/4" or 7/8" joystick bar size
Head Support Accessories
1. Otto Bock™ Head Support
2
1
Easy to clean self skinning polyurethane
foam
Anatomically shaped to provide lateral
flexion control
­­­­7" wide x 5" high or 9" wide x 6" high
2. Standard
Easy to clean self skinning polyurethane
foam
Gentle lateral contouring
6.5" wide x 7" high
4
3
3. Stealth Comfort Plus
5
6
7
Soft, comfortable layered foam on coated
metal shell
Removable, washable cover
Four pad sizes: 8", 10" or 14" wide x 6" high
and 6" wide x 3.75" high
4. Head Support Kit: Onyx auto style
kit
Onyx leatherette cover & Auto-style contouring
8" wide x 8" high x 4" thick
Dual pivot ball for pad orientation
Limited adjustability – recommended for
Contour or High backs
Height adjustable
Includes fixed mount clamp
5. Standard Hardware
Comes standard with Otto Bock™,
Standard and Stealth Comfort Plus
Pads
6. Multi-Axis
Upgrade option for Otto Bock,
Standard and Stealth Comfort Plus
pads
Dual pivot linkage for pad
orientation
Depth adjustable­through
horizontal slide bar
Height adjustable
Includes mounting clamp for
attachment to back with knob
style release for headrest removal
7. Stealth “World’s Best”
Upgrade option for Otto Bock,
Standard and Stealth Comfort Plus
Pads
Dual pivot balls for pad orientation
Depth adjustable through dual link
system
Height adjustable
Includes mounting clamp for
attachment to back with latch
style release for headrest removal
33
Other Seating and Positioning Accessories
1
2
1. Air Mesh Calf Strap
Available in 4 sizes: M, L, MD, LG
For 15" – 18" wide chairs
M: 3.5" high
MD: 9" high
For 18" – 22" wide chairs
L: 3.5" high
LG: 9" high
2. Padded Lap Belts
2" wide belts, comfortable padding
Center pull tightening, push release buckle
2 or 4 point attachment
3. Cushion Rigidizer
3
4
Lightweight plastic seat insert fits between seat rails for level support and eliminates
hammock effect of seat upholstery. Securely attached to bottom of cushion inside
cushion cover
4. Drop Base
5
6
Provides stable support base for the cushion
Lowers seat-to-floor height which aids in foot propulsion, opens up seat to back
angle, allows easy lateral transfers and improves basic functionality when in a
seated position
Width adjustable: Three sizes fit wheelchairs from 14" to 22" wide
Height and angle adjustable: up to 2" of drop provided
Portable quick-release hardware allows easy removal of base from wheelchair
5. Basic Headrest
Padded to provide comfortable occipital support with horizontal and vertical
adjustable hardware and outer cover easily removes for laundering
6. Adjustable Headrests
7
8
Contoured head and neck supports available in four styles
Dual-ball swivel hardware for multi-plane adjustment
Durable steel reinforced polyurethane pads - easily wipe clean
7. Full Tray - Slide-on Mount
Break-resistant clear polyester resin tray surface
Width adjustable mounting hardware securely fastens tray to chair arm pads
Molded-in rim helps keep items on tray
8. Full Tray - Hook and Loop Mount
Lightweight and easy to handle with break-resistant clear polycarbonate tray surface
Easily attaches to chair armrest with hook and loop straps
Removable trim allows thorough cleaning
9
10
9. Half Tray - Swingaway
Break-resistant clear polycarbonate tray surface
Tray securely bolts to wheelchair armrest and is durable
Tray easily swings away when not in use and molded-in rim helps keep items on tray
10. Foam-In-Place Kit
11
12
Easy-to-use Foam-in-Place kit provides custom foam mold insert in minutes
Provides additional support and positioning for users who need a more custom fit
Custom-molded insert can be easily removed for modification or remolded to
meet the changing needs of the user (Can be used with Invacare® Matrx® Personal
Back™10, Personal Back™ 10 Plus, PB and PB Deep Backs)
11. Belts and Straps
Three sizes of shoulder supports fit child, junior and adult
Three sizes of padded lap belts fit child, junior and adult; pinch release buckle
Push-button style release provides secure attachment
Three sizes of four-point lap belt to fit child, junior and adult; push button release
buckle
12. Privacy Flaps
The Privacy Flaps interface with the Invacare Matrx PB, Invacare Matrx PB Deep,
Invacare Matrx Elite, Invacare Matrx Elite Deep and Invacare Matrx MX1 backs, up to
20" widths. They are designed to cover the gap between the bottom of the backrest
and the seat pan and attach with hook and loop fasteners. Four standard sizes
are available to fit backs up to 20" wide. Privacy flaps for backs 21" and wider are
available as options in the back configurator
34
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement