LG AN-MR600 Owner's manual

LG AN-MR600 Owner's manual
Magic Remote
Please read this manual carefully before using your remote and
retain it for future reference.
(Brazil : www.lge.com/br)
The remote control image shown may differ from the actual product.
Depending upon country.
Magic Remote and Alkaline Batteries (AA)
Owner’s manual
Wi-Fi/Bluetooth Dongle (AN-WF500)
** Some models require the purchase of a Wi-Fi / Bluetooth dongle. For more information, refer
to the details about accessories in the User Manual of your TV.
** For more information about how to connect and use, please refer to the user manual of the
Wi-Fi/Bluetooth dongle.
** Contents in this manual may be changed without prior notice due to upgrade of product functions.
1. Installing Batteries
** Please read this manual carefully.
** Press the top of the battery cover, slide it back, and lift the
cover as shown below.
** To replace batteries, open the battery cover, replace alkaline
batteries (1.5 V, AA) matching
ends to the label
inside the compartment, and close the battery cover. Be sure
to point the remote control at the remote control sensor on
the TV.
** To remove the batteries, perform the installation actions
in reverse. Don’t mix old or used batteries with new ones.
Close the cover securely.
** Open the battery cover to find the label.
2. Precautions
** After replacement of the battery, use the remote control following pairing in accordance with user
** If the unit does not operate after replacement of battery, reattempt pairing in accordance with the
user manual.
** If the remote controller is not being used for prolonged period of time, remove the battery from the
** Do not dismantle or exert heat to the battery.
** Do not drop battery or exert extreme impact that may even cause the case to be damaged.
** Do not immerse the battery in water.
** There is danger of explosion if a the battery is inserted incorrectly.
** Properly dispose of used batteries
** The remote control image shown may differ from the actual product.
Turns the TV on or off.
Changes the input source.
** Pressing and holding the
external inputs.
(INPUT) button displays all the lists of
Number buttons
Enters numbers.
Alphabet buttons
Enters letters. (Depending upon model)
Inserts a
(DASH) between numbers such as 2-1 and 2-2.
(Depending upon model)
Accesses the saved channels or programmes list.
Views the information of the current channels or programmes and
Adjusts the volume level.
Mutes all sounds.
** By pressing and holding the
button, video/audio
descriptions function will be enabled.
applicable to North America /
applicable to Europe,
CIS, and Thailand)
** SAP (Secondary Audio Program) Feature can also be enabled by
pressing the
button. (Applicable to North America)
Scrolls through the saved channels or programmes.
Accesses the Home menu.
Press the center of the
WHEEL (OK) button to select a menu.
You can change channels or programmes by using the
(OK) button.
Press the up, down, left, or right button to scroll the menu.
If you press
buttons while the pointer is in use, the
pointer will disappear from the screen and the Magic Remote will
operate like a general remote control.
To display the pointer on the screen again, shake the Magic Remote to
the left and right.
Returns to the previous screen.
Clears on-screen displays and returns to Last Input viewing.
Shows channels or programmes guide. (Depending upon model)
(Screen remote)
Displays the Screen Remote.
** Accesses the Universal Control Menu in some regions.
Used for viewing 3D video.
** Works with a 3D-enabled TV.
(Voice recognition)
(Depending upon model)
Network connection is required to use the voice recognition
1. Press the voice recognition button.
2. Speak when the voice display window appears on the TV
** Use the Magic Remote no further than 10 cm from your face.
** The voice recognition may fail when you speak too fast or too
** The recognition rate may vary depending on the user’s
characteristics (voice, pronunciation, intonation, and speed)
and the environment (noise and TV volume).
(Q. Settings)
Accesses the Quick Settings.
** Pressing and holding the
(Q. Settings) button displays
the Advanced menu.
Activates or deactivates the subtitles. (Depending upon model)
Coloured buttons
These access special functions in some menus.
(TELETEXT buttons)
These buttons are used for teletext. (Depending upon model)
Recalls your preferred subtitle in digital mode. (Depending upon
1. How to register or deregister
How to register the Magic Remote
To use the Magic Remote, first pair it with your TV.
1. Put batteries into the Magic Remote and turn the
TV on.
2. Point the Magic Remote at your TV and press the
WHEEL (OK) on the remote control.
** If the TV fails to register the Magic Remote, try
again after turning the TV off and back on.
How to deregister the Magic Remote
Press and hold the
(BACK) and
buttons at the same time for five seconds, to unpair
the Magic Remote with your TV.
** Pressing and holding the
button will let you
cancel and re-register Magic Remote at once.
2. How to use
** Shake the Magic Remote slightly to the right
and left or press
buttons to make the pointer appear on the
(In some TV models, the pointer will appear
WHEEL (OK) button.)
when you turn the
** If the pointer has not been used for a certain
period of time or Magic Remote is placed on a
flat surface, then the pointer will disappear.
** If the pointer is not responding smoothly, you
can reset the pointer by moving it to the edge
of the screen.
** The Magic Remote depletes batteries faster
than a normal remote due to the additional
** Use the remote control within the specified range (within 10 m).
You may experience communication failures when using the device outside the coverage area or
if there are obstacles within the coverage area.
** You may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the same frequency band
(2.4 GHz) as the Magic Remote. This may cause communication failures.
** The Magic Remote may not work properly if a wireless router (AP) is within 1 meter of the TV.
Your wireless router should be more than 1 m away from the TV.
** Do not disassemble or heat the battery.
** Do not drop the battery. Avoid extreme shocks to the battery.
** Inserting the battery in the wrong way may result in explosion.
Model No.
Range of frequency
2.400 GHz to 2.4835 GHz
79 channels
Reception sensitivity
-89.5 dBm
Dimensions (mm)
Width 48.3 x Length 183.5 x Thickness 33.7
(tolerance of ± 1 mm)
101.7 g ± 8 g
(excluding battery)
Power source
AA 1.5 V,
2 alkaline batteries are used
Power consumption
300 mW
Operational temperature
0 ℃ to 60 ℃
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF