VMOD91 - Falcon Technical Ltd
FA L CON
WORLD CLASS SE CURITY
FALCON PREDATOR EVO4+2
Vehicle Security System with Remote Starter & LCD Pager
Owner’s Manual
Table of Contents:
A) Introduction ..............................................................................................................2
A-1) Features ...........................................................................................................2
A-2) Key Function Table.............................................................................................2
A-3) Button Operations ..............................................................................................3
A-4) Color LCD Transmitter ........................................................................................3
A-5) Indications of Icons ............................................................................................3
B) System Features........................................................................................................4
B-1) Remote Transmitter Code Learning.......................................................................4
B-2) Remote Arm......................................................................................................4
B-3) Remote Disarm..................................................................................................4
B-4) Enhanced System Alerts .....................................................................................4
B-5) Panic Mode .......................................................................................................5
B-6) Boot Release (optional feature) ............................................................................5
B-7) Car Finder.........................................................................................................5
B-8) Mute Arm Mode .................................................................................................5
B-9) Remote Valet Mode ............................................................................................5
B-10) Emergency Override Mode.................................................................................5
B-11) Shock Sensor Bypass........................................................................................5
B-12) Channel 3 Output/Total Closure Output (optional feature) ......................................5
B-13) Remote Engine Start for Automatic Transmissions.................................................5
B-14) Reservation Mode (Remote Engine Start for Manual Transmissions Only) .................6
B-15) LED Status Indicator.........................................................................................6
C) Optional Features ......................................................................................................7
C-2) Passive Arming ..................................................................................................7
C-3) Passive Locking .................................................................................................7
C-4) Ignition lock ......................................................................................................7
C-5) Auto Re-Arming .................................................................................................7
C-6) Anti-Hijacking Mode ...........................................................................................7
C-7) Turbo Timer ......................................................................................................8
C-8) Timer Start Mode ...............................................................................................8
D) Visual Deterrent ........................................................................................................9
HELPLINE: 0906 700 10 20
(All calls charged at 50p/min)
Falcon Security Ltd. Unit 9 Tanning Court, Warrington, Cheshire, WA1 2HF, UK
Internet: http://www.falcon-security.com
Email: [email protected]
1
A) Introduction
The Falcon Predator EVO4+2 is a unique Vehicle Security System with Remote Engine Starter
System and LCD Pager, it is designed to provide you with the highest level of security and
convenience for your vehicle.
Thanks to the built in two-way interactive communications system the small palm size LCD
remote transmitter will instantly alert you audibly and if the alarm is triggered.
The Falcon Predator EVO4+2 has many programmable functions so please read this manual
carefully before installing the Falcon Predator EVO4+2 system.
A-1) Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1 x Two Way LCD Remote Transmitter
and 1 x one way 2nd remote
Code Hopping and Code Learning
Remote System
Up to 4 remote transmitters
Programmable
Remote Engine Start with system
armed/disarmed
Timer Engine Start
Turbo Timer
Remote Arm/Disarm
Mute Arm/Disarm
Immobiliser
Remote Boot Release
Passive or Active Lock Programmable
Auto Re-arm
Ignition Lock/Unlock
Car Finder
LCD Remote: Vibrate or Audible Alert
LCD Back Light Display
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LCD Remote: low battery warning
Audible Intrusion Zone Identification
Defective Zone Alert and Bypass
Keyless Entry While Ignition is on
Remote Panic Alarm
Anti-Hijacking
Emergency System Override
Remote Valet Mode
Passive Arming
Siren programmable for 30 or 60
seconds
Built in Central Locking Control
Built in Total Closure Control
Central Lock Active Time selectable 0.5
or 3.5 seconds
Plug-In Dual Stage Shock Sensor
Shock Sensor Bypass
Vehicle Status Report
Interior Light Delay Time
programmable
A-2) Key Function Table
Button
Button 1 once
Button 2 once
Button 1 for 3 secs
Buttons 1+3 for 1 sec
Button 3 once
Button 3 for 2 secs
Button 4 for 3 secs
Button 4 once
Buttons 1+2 once
Buttons 1+4 for 1 sec
Buttons 2+3 once
Buttons 2+4 once
Buttons 3+4 once
Armed
Arm
Disarm
Panic
Channel 3
Car Finder
Boot Release
Remote Start On/Off
LCD Remote Back Light
Mute Disarm
Timer Start On/Off
Status Report
Vibrate Alert On/Off
Disarmed
Ignition On
Arm
Disarm
Panic
Panic
Channel 3
Channel 3
Car Finder
Anti-Hijacking
Boot Release
RPM Learning
Remote Start On/Off
LCD Remote Back Light
LCD Remote Back Light
Mute Arm
Valet Mode
Timer Start On/Off
Status Report
Status Report
LCD Remote Power Saving LCD Remote Power Saving
Vibrate Alert On/Off
Vibrate Alert On/Off
2
A-3) Button Operations
Back Light:
Press button 4 once, the LCD backlight turns on for 3 seconds
Power Saving:
With the system disarmed, press buttons 2+4 once, the LCD remote control will chirp once and
70 seconds later, the LCD screen will be switched off to save the battery power. Simply pressing
any button will switch the LCD back on again.
Vibration Alert:
Press buttons 3+4 once to switch between vibration or audible alert of LCD remote control.
Status Report:
Press buttons 2+3 once, the system will send back updated vehicle status to the LCD remote
control.
A-4) Color LCD Transmitter
The LCD remote transmitter provides you with the live monitoring on your vehicle 24 hours a day.
As shown below any violated zones are reported to you instantly through the LCD remote
transmitter. Press buttons (2) and (3) at the same time to get the current status of your
vehicle.
A-5) Indications of Icons
Icon
Battery
Wave
Bonnet
Car Siren
Indicator Light
Hammer
Zzzzz
Boot
Exhaust Fumes
Door
Lock/Unlock
Indication
Remote Control Low Battery
Vibration Mode
Bonnet Open or Trigger
Mute Mode
Indicator Light Flash
Trigger of the First or Second Stage Shock Sensor
Power Saving Mode
Boot Open or Trigger
Engine Remote Start
Door Open or Trigger
Arm/Disarm
3
B) System Features
B-1) Remote Transmitter Code Learning
The included remotes control are programmed to the system before they leave the factory.
Follow the below procedure to program a new remote control:
a> Follow the below procedure to program a new remote control.
With the alarm disarmed, and the doors CLOSED, switch the ignition ON/OFF 3 times (within 1
second of each other) and then back to the ON position.
The siren will sound for 2 seconds to indicate the alarm is in code learning mode.
b> To program the new remote control press button (1) within 10 seconds.
The siren will chirp and the hazard lights flash twice to confirm that the code has
been learned. Follow the same procedure for second, third and fourth remote transmitter.
c> If the ignition is turned OFF or button (1) is not pressed within 10 seconds, the system will
quit the code-learning mode. If this happens you must start again from the first step.
d> Up to 4 remote control transmitters can be programmed to the system.
B-2) Remote Arm
To arm the system, after exiting the vehicle and closing all doors, press button (1) once. The
siren will chirp once and the hazard lights flash once. The doors will be locked and immobiliser
will be on and armed. Now the system is ready to respond if intrusion attempts are detected.
If the doors or boot are opened, or the first stage shock senor is triggered, the siren will chirp
three times and the hazard lights flash three times at the same time. The violated zones will be
by-passed and the system enters into the arm mode.
B-3) Remote Disarm
To disarm the system, simply press button (2) once while the system is armed.
The siren will chirp twice and the hazard lights flash twice at the same time.
If the alarm has been trigged while the system was armed, the siren will chirp 4 times and the
parking lights flash 4 times to warn you.
B-4) Enhanced System Alerts
To protect your vehicle, the system will emit a different alert depending on why the alarm was
activated.
a> Pre-warn sensor (first-stage sensor) triggered: Light impact will activate the pre-warn sensor.
Remote LCD transmitter will sounds three short chirps with impact icon displayed.
b> Shock sensor (second-stage sensor) triggered: Heavy impact will activate the second-stage
sensor. The hazard lights will flash and siren sound for one cycle (30 or 60 seconds based on the
programmed default).
c> Ignition on: Siren will sound until the ignition is off.
d> Door opened and then closed: The hazard lights will flash and siren sound for one cycle (30
or 60 seconds).
e> Door opened and not closed: Siren will sound for three cycles (siren will stop for 5 seconds
and sound again for next cycle). Door sensors will be bypassed until they are closed.
f> Bonnet opened and then closed: The hazard lights will flash and siren sound for one cycle (30
or 60 seconds).
g> Bonnet opened and not closed: Siren will sound for three cycles (siren will stop for 5 seconds
and sound again for next cycle). Bonnet switch will be bypassed until it is closed.
h> Alarm triggered: Press button (1), siren will chirp once, doors lock and the system is still
armed or Press button (2) siren will chirp four times, doors unlock, immobiliser will turn off and
LED turns off or flashes rapidly.
4
B-5) Panic Mode
Use this mode when you are in a situation where you need to warn away intruders.
a> With the alarm disarmed, press button (1) for 3 seconds.
The doors will be locked, immobiliser will turn on, hazard lights will flash and siren sound. The
system will be armed after the siren stops.
b> With the alarm armed, press button (1) for 3 seconds.
The hazard lights will flash and the siren will sound. The system will remain armed.
c> With the ignition on, press button (1) for 3 seconds.
The hazard lights will flash and the siren sound. After the ignition is turned off, the immobiliser
will be on and armed.
B-6) Boot Release (optional feature)
Press and hold button (3) for 2 seconds with the system either armed or disarmed and the boot
will be released.
B-7) Car Finder
a> Press button (3) once while the system is armed or disarmed, the hazard lights will flash 12
times and the siren will chirp 6 times.
b> During Car Finder mode the system can be armed or disarmed as normal.
B-8) Mute Arm Mode
With the alarm disarmed, Press button (1) and (2) simultaneously, the hazard lights will flash
once, then press button (1) once again within a second. (The LCD Remote Transmitter will
sounds one long chirp and display mute and lock icons).
Note that when the system is mute armed the siren will not sound if the 2nd stage shock sensor
or additional sensors are triggered but the hazard lights will flash as normal.
B-9) Remote Valet Mode
This mode is a convenient feature to use when you hand the remote transmitter to third person
for valet parking or vehicle service.
With the system disarmed, switch the ignition on and press button (1) and (2) once
simultaneously, the siren will chirp once and the LED turn on steady and the system will enter
valet mode. In this mode, drivers can control only door lock/unlock.
To exit the remote valet mode, repeat the steps above. The siren will chirp twice and the LED
turns off to confirm leaving valet mode.
B-10) Emergency Override Mode
In the event of an emergency such as losing the remote control transmitters, you can override
the full security system.
a> Open the door with your car key and the alarm will be triggered.
b> Switch the ignition on/off 6 times.
B-11) Shock Sensor Bypass
The 1st stage (warn off) shock sensor can be bypassed temporarily by pressing button (1) within
2 seconds of arming.
B-12) Channel 3 Output/Total Closure Output (optional feature)
Channel 3 output is often used to operate an external device or can be configured to operate
Total/Comfort Closure.
B-13) Remote Engine Start for Automatic Transmissions
Press button (4) for over 3 seconds to remote start.
The engine will shut off in the following cases to protect your vehicle after the remote start.
a> Bonnet Open
5
b> Door Open
c> Boot Open
d> Foot brake pushed down
e> Hand brake released
* After remote engine start has been used, please follow the following steps to enter the vehicle.
a> Disarm the system if armed.
b> Insert the car key into the ignition then switch it to <On>, not Start.
The engine will shut down if you apply the foot or hand brakes before inserting the car key into
the ignition and switching <On>.
B-14) Reservation Mode (Remote Engine Start for Manual Transmissions Only)
For manual transmission cars reservation mode is used for safety reasons. Ensure that Car Type
is set to Manual (please refer to # 15 in Programming Option Table)
1) Follow the below procedure to set up the reservation mode.
a> After arriving at the destination, leave the ignition on and shift the gear to the neutral
position.
b> Pull up the hand brake.
c> Remove the key from the ignition. The engine will keep running.
d> Exit the vehicle and close the door after Step c. The engine will shut down and the
reservation mode is set up. (if the turbo timer feature is enabled the engine will keep running for
120 or 180 seconds before shutting down).
Reservation mode must be set up as above every time before exiting manual
transmission cars in order to activate the remote start.
Important:
2) Important requirements to activate the reservation mode:
a> The transmission gear must be placed in the neutral position.
b> The hand brake must be pulled up.
c> Do not set the reservation mode when people are in the vehicle.
d> Do not activate the remote engine start when people are in the vehicle
3) Cancel the Reservation Mode
The reservation mode will be cancelled if any of the following cases happen.
a> The parking brake is released when the engine is running.
b> Button 4 is pressed for 3 seconds between Step c and d during setting of the reservation
mode.
c> The valet mode is applied after completing the reservation mode.
d> Doors opened after completing the reservation mode without remote engine start.
B-15) LED Status Indicator
If the system was triggered whilst armed the siren will chirp four times on disarm, the hazard
lights will flash twice and the LED will flash to indicate the triggered zone as follows:
1
2
3
4
Flash
Flashes
Flashes
Flashes
:
:
:
:
Shock Sensor
Boot/Bonnet
Door
Ignition
System Status:
Slow Flash
Fast Flash
Steady Light
No Light
:
:
:
:
Arm
Auto Re-Arm/Passive Arming/Anti-Hijacking
Valet Mode
Disarm
*The LED memory will be cleared by turning the ignition on or disarming and arming the system
again.
6
C) Optional Features
The Predator EVO4+ has additional features for different types of vehicles and your customised
needs. These options can be programmed by your installer.
C-2) Passive Arming
If Passive Arming is enabled, when the doors are closed the LED starts to flash rapidly. Then
siren will chirp once, the hazard lights flash once, Immobiliser turns on and the system is armed
automatically 30 seconds after the doors closed. If Passive Locking enabled, the doors will be
locked.
C-3) Passive Locking
If Passive Locking is enabled: Upon the doors being closed, the LED starts to flash rapidly. The
siren will chirp once, the hazard lights flash once, immobiliser turns on and doors are locked
automatically 30 seconds after the last door is closed.
C-4) Ignition lock
If Ignition locking is enabled: The doors will be automatically locked 15 seconds after the ignition
is turned on. The doors will be not locked if opened within 15 seconds of the ignition being
turned on. The doors will be unlocked immediately upon the ignition being turned off.
C-5) Auto Re-Arming
If Auto Re-Arming is enabled, the system will be automatically armed 30 seconds after the
system is disarmed if no doors (or bonnet/boot if connected) are opened.
C-6) Anti-Hijacking Mode
Anti-Hijacking can be activated by remote control or opening of a door. The Anti-Hijack delay
can be programmed through the installer options for either 15 or 60 seconds.
a) By remote control: (Only if installer option feature #12 is enabled)
- With the system disarmed and ignition on
- Press button 3 once
- The LED starts to flash rapidly
- After 15 or 60* seconds the siren will chirp and the hazard lights will flash 10 times as a
warning.
- The siren will then sound, the immobiliser will turn on and the hazard lights will flash until
anti-hijacking mode is deactivated.
b) By doors opening: (Only if installer option feature #13 enabled)
- With the system disarmed and ignition on
- Open the door
- LED starts to flash rapidly
- After 15 or 60* seconds, the siren will chirp and the hazard lights will flash 10 times as a
warning.
- The siren will then sound, the immobiliser will turn on and hazard lights flash until
anti-hijacking mode is deactivated.
To deactivate anti-hijacking:
a) During the 15 or 60* second delay:
- Turn the ignition off
- The system will enter the armed mode after 15 or 60* seconds.
- Doors will lock, immobiliser will turn on and the LED flashes slowly
- The siren will chirp and hazard lights flash once to confirm
b) During the warning (siren chirps & flashing hazard lights):
- Turn the ignition off
- The system will enter the armed mode after the warning
- Doors will lock, immobiliser will turn on and the LED flashes slowly
- The siren will chirp and hazard lights flash once to confirm
Once the system enters the anti-hijacking mode with the siren is sounding and the hazard lights
flashing there are 2 way to deactivate the anti-hijacking mode as follows:
7
a) By ignition:
- Turning the ignition off during the anti-hijacking mode
- After the alarming cycle
- Doors will lock, immobiliser will turn on and the LED flashes slowly
- The siren will chirp and hazard lights flash once to confirm
b) By override:
- Turn the ignition off
- Turn the ignition on/off 6 times: on-off, on-off, on-off, on-off, on-off, on-off
- The Immobiliser will turn off and the doors will lock
- The LED will be turned off or flash to indicate the triggered zone and the system is disarmed.
Note: The system will not enter the valet mode during the anti-hijacking mode.
*The Anti-Hijack delay can be programmed through the installer options for either 15 or 60
seconds.
C-7) Turbo Timer
The Turbo Timer delay can be programmed through the installer options for either 120 or 180
seconds.
When the Turbo Timer feature is enabled the engine will stay running for 120 or 180 seconds
after turning the ignition off in order to protect the turbo life.
Operation is as follows:
- With the ignition key still in on position
- Pull up the handbrake
- Turn the ignition key to the off position
- The Ignition and ACC circuits will stay on
- The system will then start the 120 or 180 seconds countdown
- Open and close the door
- The Ignition and ACC circuits will stay on
- After 120 or 180 seconds, the ignition and ACC circuits will be turned off automatically.
- Pressing button 1 during the 120 or 180 seconds will arm the system (Press buttons 1+2 for
Mute Arm)
* The turbo time will be functional only when the engine has been running for at least 5 minutes
C-8) Timer Start Mode
This feature is convenient to use in the cold winter season.
With the system armed or disarmed the Timer Start feature can be turned on or off as follows:
Turn on Timer Start Mode
- Press Buttons 1+4 for 1 second, the siren will chirp and the hazard lights will flash once to
confirm the feature has been turned on for 24 hours.
- Then the engine will be started every 3, 6 or 12 hours depending on installer programming.
Turn off Timer Start Mode
- Press Buttons 1+4 for 1 second, the siren will chirp and the hazard lights will flash once to
confirm the feature has been cancelled.
Timer Start Mode will be cancelled in the situations below:
- When the remote start is used
- If the ignition has been turned on with the system disarmed
- The doors are opened with the system disarmed.
8
D) Visual Deterrent
As a visible deterrent in addition to the flashing dashboard LED your vehicle should have been
fitted with the following warning stickers. A helpline sticker should also have been fitted to your
front windscreen.
SIDE
WAR NING
STICKER
HE LPLINE
NUMBE R
STICKE R
01925 650118
REAR
WARNIN G
STICKE R
SIDE
WAR NING
STICKER
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement