Broan Rm523004 Installation Instructions

Broan Rm523004 Installation Instructions
SPECIFICATION SHEET
RM52000 SERIES
)
(
RANGE HOOD
A wall-mounted chimney hood with sleek, graceful,
hand-rolled curves that is engineered to meet the
requirements of today’s conventional appliance
and kitchen styles.
FEATURES
• Professional style design
• 430 Stainless Steel #4 Brushed construction
• Wall mount installation
• Seamless corners for easy cleaning
• Ducted/non-ducted telescopic flue - fits 8 ft. to 9 ft. ceilings
• 6” round duct connector/backdraft damper
• 370 cfm centrifugal blower
• Three-speed slide control
• Dual halogen lighting (2 x 20 Watt, Type JC 12V 20W G4
TYPICAL SPECIFICATION
Range hood shall be Broan Model RM52000.
Unit shall be convertible between ducted (using a washable
aluminum filter) and non-ducted (using a recirculation kit).
Motor to be permanently lubricated.
Unit shall have three-speed fan switch and separate light
switch.
Sides shall be mitered and bottom edge hemmed - with no
sharp edges.
Air delivery shall be no less than 370 CFM.
Unit shall be U.L. and
cUL listed.
Base - bulbs included)
• Dishwasher-safe aluminum filter features a quick-release
latch and professional style appearance
• Available sizes: 30”, 36”, 42”
• Heat Sentry - automatically turns blower to high speed
TM
when excess cooking heat is detected
OPTIONS
• Replacement grease filters available
• Non-ducted recirculation kit (Model RRK51)
• Replacement charcoal filter (Model FILTERSQUARE)
• Flue Extension for 10 ft. ceiling Model RFX5204 (ducted
applications), Model RFXN5204 (non-ducted applications)
(35-1/16” long)
SPECIFICATIONS
VOLTS
AMPS
CFM
SONES
DUCT
120
2.63
370
7.0
6” round
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in AMCA’s state-of-the-art test
laboratory. Sones are a measure of humanlyperceived loudness, based on laboratory
measurements.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
60D
Date
99043164D
RM52000 SERIES WIRING
120-VOLT, 60 HZ, GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 8” DIMENSION)
8”
4”
CENTERLINE OF
HOOD & DUCT
19” - 22”
RM52000 SERIES MOUNTING
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
L
C
L
5
DRYWALL
1
16 "
HOOD DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE 1)
CEILING
HEIGHT
8 FEET
DUCT
METHOD
24”
25”
26”
27”
29”
30”
42”
43”
44”
41”
42”
43”
44”
41”
42”
43”
44”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
DUCTED
38”
39”
40”
41”
NONDUCTED
38”
39”
40”
41”
9 FEET
DUCTED OR
NONDUCTED
10 FEET
DUCTED OR
NON-DUCTED
(SEE NOTE 2)
28”
MOUNTING
BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
40”
(
)
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
NOTES:
1. Minimum hood distance
above cooktop must not be
less than 24”.
A maximum of 30” above the
cooktop is highly recommended for best capture of
cooking impurities.
Distances over 30” above the
cooktop are at the installer’s
and user’s discretion providing that ceiling height
and flue length permit.
2. Requires optional 10-foot flue
extension model RFX5204
(ducted) or RFXN5204 (nonducted).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising