null  null
© Siemens AG 2013
SCALANCE X Industrial Ethernet Switches
6,0$7,&1(7
%URFKXUH
(GLWLRQ
6HSWHPEHU
$QVZHUVIRULQGXVWU\
© Siemens AG 2013
Industrial Ethernet
Industrial Ethernet Networking
With Totally Integrated Automation, Siemens is the only
manufacturer to offer an integrated range of products and
systems for automation in all industries – from incoming
goods and the production process to outgoing goods,
from the field level through the production control level to
connection with the corporate management level.
SIMATIC NET offers all the components for industrial
communication: from industrial communications processors right up to network components – even wireless if
required.
Contents
Industrial Ethernet
Industrial Ethernet Networking . . . . . . . . . . . . . . . . . . 2
Communication for every environment. . . . . . . . . . . . 3
Network performance and technologies . . . . . . . . . . . 5
Advantages of the switching technology. . . . . . . . . . . 6
High availability thanks to redundant networks . . . . . 7
The ever expanding spread of Ethernet in the industrial environment makes it increasingly important to structure the resulting Industrial Ethernet/PROFINET networks.
SCALANCE X Industrial Ethernet switches . . . . . . . 9
SIMATIC NET offers various Industrial Ethernet switches to
achieve maximum uniformity of the networks and seamless
integration of the industrial plants.
SCALANCE X-000/XB-000 unmanaged. . . . . . . . . . . . 14
They are used for the structured networking of machines and
plants as well as for integrating them into the overall corporate network. A graded portfolio of switches up to communication processors with integrated switch enables optimum solutions for all types of industrial communication in all environments – from production up to the harshest outdoor application. The SCALANCE X and RUGGEDCOM product lines.
Compact switch modules . . . . . . . . . . . . . . . . . . . . . . 13
SCALANCE X-100 unmanaged . . . . . . . . . . . . . . . . . . 16
SCALANCE X-100 media converter. . . . . . . . . . . . . . . 17
SCALANCE XC-100 unmanaged . . . . . . . . . . . . . . . . . 18
SCALANCE X-200 managed . . . . . . . . . . . . . . . . . . . . 19
SCALANCE XF-200 managed . . . . . . . . . . . . . . . . . . . 20
SCALANCE X-200IRT managed/
SCALANCE XF-200IRT managed. . . . . . . . . . . . . . . . . 21
SCALANCE X-300 unmanaged . . . . . . . . . . . . . . . . . . 23
Media modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SCALANCE X-400 managed (layer 3) . . . . . . . . . . . . . 30
SCALANCE X-500 managed (layer 3) . . . . . . . . . . . . . 33
Media modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
SCALANCE X accessories . . . . . . . . . . . . . . . . . . . . . . 37
Industrial Ethernet Switching
Communication processors with switch functionality . . 38
Port configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Network management . . . . . . . . . . . . . . . . . . . . . . . . 42
Diagnostics and network management . . . . . . . . . . . 44
Industrial Ethernet cabling
Cabling with FastConnect. . . . . . . . . . . . . . . . . . . . . . 45
Advantages at a glance. . . . . . . . . . . . . . . . . . . . . . . . 47
2
Industrial Ethernet
© Siemens AG 2013
Industrial Ethernet
Communication for every environment
Backbone for all sectors
With the SCALANCE X and RUGGEDCOM products, Siemens
offers a comprehensive range of network products from a single source: irrespective of whether you require error-free communication even with strong electromagnetic interferences,
extreme temperatures and over long distances, or whether
fast, efficient data transmission from the process level up to
the corporate level is concerned, Siemens is your partner.
Industrial communication differs fundamentally from the communication that is used in the office environment. In the office
environment, many clients communicate with one server; there
are no cross-connections between clients. This type of data
transmission can cause bottlenecks and delays when communication links are being established, when too many clients access a server simultaneously.
SCALANCE X Industrial Ethernet switches
This cannot be used for automation because cyclically executing
process programs require up-to-date input data in order to issue
the appropriate control commands to components.
SCALANCE offers many different manners in which
PROFINET/Industrial Ethernet can be used with Totally Integrated Automation (TIA), thus guaranteeing simple integration into automation and IT landscapes.
It is additionally necessary to individually adapt applications,
communication relationships and network structures –
regardless of whether the plants are in the industrial or energy
sector, in transportation systems or infrastructures.
It must always be ensured, however, that the capacity of the network and therefore the plant or machines is optimally utilized
and any downtimes minimized. All the production and management processes must perfectly interact.
These requirements can only be satisfied when it is based on an
open, company-wide communication system that permeates
the entire company and extends beyond its boundaries. Island
solutions are avoided in automation and information technology, so the following preconditions must apply:
Convenient selection tools are available to assist you in selecting the right Industrial Ethernet switches, cables and connectors as well as in configuring the modular variants; see:
www.siemens.com/snst and
www.siemens.com/tia-selection-tool
■
Continuous flow of information from the actuator/sensor level through to the corporate management level
■
Availability of information at every location
■
Fast exchange of data between the plant sections
■
Easy, plant-wide configuring and efficient diagnostics
■
Integrated security functions that block unauthorized
access
RUGGEDCOM Industrial Ethernet switches
The network components from the RUGGEDCOM portfolio
have been designed primarily for critical applications under
extremely harsh environmental conditions in accordance with
the IEC 61850 standard.
Additional information on RUGGEDCOM can be found at
www.siemens.com/ruggedcom
Industrial Ethernet
3
© Siemens AG 2013
Industrial Ethernet
Communication in industrial environments
Totally Integrated Automation
The network and automation components of SIMATIC NET are
part of Totally Integrated Automation (TIA), an integrated range
of products and systems for automation in all areas – from incoming goods, through the production process to outgoing
goods, and from the field level, through to the connection to
the corporate management level. These components feature
the highest possible degree of integration because they access
a common database which, in turn, saves data entry costs and
ensures consistency throughout the project.
Availability and performance
The demand for high network availability for powerful networks in the various automation applications is rising continuously. Different topologies such as line, ring or star offer
wide-ranging possibilities, e.g. when implementing a production line or manufacturing cell.
Industrial Ethernet is a high-performance area and cell network designed to the IEEE 802.3 (Ethernet) standard that can
be used to set up powerful communication networks extending over long distances. PROFINET, the open Industrial Ethernet Standard, uses Industrial Ethernet and facilitates real-time
communication right down to the field level. If existing IT standards are fully utilized, PROFINET even permits isochronous motion control applications to be implemented via Industrial
Ethernet.
4
Industrial Ethernet
© Siemens AG 2013
Industrial Ethernet
Network performance and technologies
When combined, the current Industrial Ethernet technologies
can significantly boost performance in the network.
These technologies are:
• Fast Ethernet at 100 Mbps:
Message frames are transported much faster than by
Ethernet (10 Mbps) and therefore only occupy the bus for
an extremely short time. For Fast Ethernet, a 4-wire FastConnect cabling system (Cat5e) is available with cable,
plug and outlet
• Gigabit Ethernet at 1 Gbps:
Gigabit Ethernet is faster than Fast Ethernet by a factor of
10, so the bus is occupied for only one tenth of the time.
For Gigabit Ethernet, an 8-wire FastConnect cabling system
(Cat6) is available with cable, plug and outlet
• Gigabit Ethernet with 10 Gbps:
Compared to Ethernet with 1 Gbps, Ethernet with 10 Gbps
is faster by a factor of 10
• Full Duplex avoids collisions:
data throughput is increased hugely since the usual message
frame repetitions are avoided. Data can be sent and received simultaneously between two nodes. The data
throughput for a full duplex connection therefore rises to
200 Mbps with Fast Ethernet and to 2 Gbps with Gigabit
Ethernet.
With full duplex, greater network expansion is also possible.
This means, for example, that when glass fiber-optic cables
are used, distances of 120 km and more can be achieved
between two nodes
• Switching permits parallel communication:
When a network is subdivided into several segments using
a switch, this results in load separation. Data communication is possible in each individual segment independently
of the other segments. In the overall network, several message frames can therefore be en-route simultaneously. The
performance gain is due to the simultaneity of several message frames
• Autocrossover automatically crosses the send and receive
cables on Twisted Pair interfaces
• Autosensing describes the characteristic of network nodes
(terminal devices and network components) that automatically detect the transmission rate of a signal (10 Mbps,
100 Mbps, or 1 Gbps) and support autonegotiation.
• Autonegotiation is a configuration protocol
Before initiating the actual data transmission, network
devices automatically negotiate a transmission mode that
all devices can use (10/100/1000 Mbps, full duplex or half
duplex)
Industrial Ethernet
5
© Siemens AG 2013
Industrial Ethernet
Advantages of the switching technology
Industrial Ethernet Switches are active network components
that support the different network topologies:
Networks can be constructed with switches in electrical or
optical line, star and ring topologyologies. These active network components specifically distribute data to the relevant
addressees.
SIMATIC NET offers the right Industrial Ethernet switch or a
component with switch functionality for every application:
• Compact Switch Modules (CSMs) for additional ports
directly on SIMATIC
• Unmanaged and managed switches of the SCALANCE X
product group, perfectly tuned to the respective automation and networking task for integration in PROFINET
• Communication processors (CPs) for SIMATIC and the PC
that handle the switching of smaller network segments in
addition to their actual task, supporting the CPU in communication tasks
Segment A
Segment B
Segment A
Segment B
Segment C
Segment D
Segment C
Segment D
Shared LAN
Data traffic
6
Industrial Ethernet
• All nodes in the network share
the network performance/
data rate.
• All data packets pass through all
segments.
• Only one message in the network
at a time.
Data traffic
G_IK10_XX_10002
Switched LAN
• Each individual segment features
the full performance/
data rate
• Simultaneous data traffic in
several segments, several
message frames at the same
time
• Filtering: Local data traffic
remains local; only selected data
packets exceed segment
boundaries
Switched LAN
Electrical or optical cabling systems are used as the transmission medium between the switches. Terminal devices are connected electrically over twisted-pair cables.
The switching technology permits parallel communication,
i.e. a network is divided into several segments, thereby resulting in load separation. Data communication is therefore possible in each individual segment independently of the other segments. This means that, throughout the network, multiple
message frames can be in transit at the same time.
The performance gain is due to the simultaneity of several
message frames.
The switching technology offers definite advantages over
shared LAN
• Switches can be used to construct subnets and
network segments
• Data throughput and network performance are increased
by structuring data communication.
• The rules for network configuration are simple
• Network topologies with 50 switches in a ring and an overall
extension of up to 150 km can be implemented without the
need to take signal propagation times into account.
• Unlimited expansion of the network by connecting individual collision domains/subnets (beyond 150 km, the signal
propagation times must be taken into account)
• Easy, reaction-free extension of existing networks is
possible
© Siemens AG 2013
Industrial Ethernet
High availability thanks to redundant networks
High system availability resulting from redundancy
In general, there are two types of redundancy:
Production plants are designed and calculated to ensure high
availability. The consequences of a system failure are, therefore, costly downtimes, high restarting costs and the loss of
valuable data or materials. Redundant control systems and redundantly configured networks protect plant from failures in
their automation systems. In the event of a fault, the highavailability communication can take over automatically without any consequences for the plant. To achieve the extremely
fast response times required by industrial companies, SIMATIC
NET has for many years used standardized network redundancy procedures that support reconfiguration times of a few milliseconds in the event of a fault. For critical applications with
high-availability requirements that do not permit any additional delay in communication, Siemens offers various solutions for Industrial Ethernet networks.
• System redundancy: A high-availability automation system
is implemented by deploying systems and communication
components in duplicate
• Media redundancy: Systems are only implemented individually, but in the event of an interruption in the network, the
plant will continue to operate along substitute communication paths
PRP communication
SIMATIC S7-400 with
CP 443-1RNA
Seamless redundancy systems
Parallel Redundancy Protocol (PRP)
The PRP redundancy procedure in accordance with the
IEC 62439-3 standard is based on double transmission of message frames over two separate networks.
The access points SCALANCE X-200RNA for PRP networks connect up to two network segments or terminal devices without
PRP functionality, without delay, over two parallel networks.
High-availability Seamless Redundancy Protocol (HSR)
Server with
SOFTNET-IE RNA
The HSR procedure in accordance with the IEC 62439-3 standard is based on double transmission of message frames over
ring topology networks in both directions.
SCALANCE
XR-300
In the case of a fault, the message frame will be transmitted
without any delay. No reconfiguration time (relearning of the
communication paths) is necessary for the network, as is the
case for most other redundancy procedures.
SCALANCE
XR-300 EEC
HSR communication
SCALANCE
X204RNA
One PRP network and one HSR network are coupled redundantly over SCALANCE X204RNA or SCALANCE X204RNA EEC.
These redundancy techniques are used, in particular, in plants
with high network availability.
SCALANCE
X204RNA EEC
Industrial Ethernet
Product versions:
SCALANCE
X204RNA
EEC
Protection device
with HSR 1)
Protection device
without HSR 1)
IP camera
PC
1)
High-Availability Seamless Redundancy Protocol
For extended ambient
conditions, e.g. EMC load
• SCALANCE X204RNA
• SCALANCE 204RNA EEC for environments with high
EMC load
G_IK10_XX_10344
SCALANCE
X204RNA
Example configuration: redundant network topology with PRP and
HSR communication
Industrial Ethernet
7
© Siemens AG 2013
Industrial Ethernet
High availability thanks to redundant networks
MRPD
High Speed Redundancy Protocol (HRP)
High network availability can be achieved without reconfiguration time using the PROFINET-compatible MRPD procedure
(Media Redundancy for Planned Duplication).
For use in high-availability plant networks, fast redundancy in
the ring can be implemented with High Speed Redundancy.
The reconfiguration time for 50 switches in the ring is up to
300 ms.
The MRPD protocol is an extension to the MRP protocol for
sending message frames in duplicate within a ring topology.
Networks can only be constructed with SCALANCE X-200IRT
switches and additional components with the real-time feature Isochronous Real-Time IRT (PROFINET standard), such as
SIMATIC controllers, ET 200, SIMOTION and SINAMICS
drives.
Standby coupling
Industrial Ethernet switches of the SCALANCE X-300 and
X-400 product lines are equipped with this function for the redundant coupling of network segments, such as coupling of
redundant ring topologies. This is particularly necessary in
process automation to meet the demanding requirements of
network availability.
(Rapid) Spanning Tree Protocol STP/RSTP
(Rapid) Spanning Tree is a redundancy procedure with a
minimal response time that has been standardized in
IEEE-802.1D (2004). The reconfiguration times depend on the
topology and start at around 50 ms.
Router redundancy VRRP
(Virtual Router Redundancy Protocol)
Layer 3 switches, such as SCALANCE X-500, support router redundancy as well as parallel routing over several paths which
increase the availability of the network significantly. They are
therefore suitable for use in high-performance plant networks
(e.g. with high-speed redundancy). Since IT standards are supported (e.g. VLAN, IGMP, RSTP), the seamless integration of
automation networks into existing office networks is possible.
Routing functions on layer 3 permit communication between
different IP subnetworks.
8
Industrial Ethernet
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
Overview
Industrial Ethernet switching components comprise:
• Compact Switch Modules (CSMs)
• SCALANCE X Industrial Ethernet switches
• Communications processors (CP) with integral switch
Compact Switch Modules (CSMs)
Unmanaged switches for use directly on the SIMATIC or LOGO!
for interface expansion and integration of machines into existing plant networks.
SCALANCE X-000/XB-000 unmanaged
Unmanaged switches with electrical and optical ports for establishing small networks for machine and process cells with
10/100/1000 Mbps.
SCALANCE X-100 unmanaged
Switches with electrical and/or optical ports, redundant power
supply, and signaling contact for use in machine-level applications (also available as media converters with two ports for
converting between different media).
SCALANCE X-200 managed
Universally applicable, from machine-level applications to networked plant sections. Configuration and remote diagnostics
are integrated in the STEP 7 engineering tool. This increases
the level of plant availability. Devices with a high degree of
protection permit a cabinet-free construction.
Appropriate switches (SCALANCE X-200IRT) are also available
for use in subsystem networks requiring strict real-time and maximumavailability.
SCALANCE XF-200 managed
SCALANCE XF-200 Industrial Ethernet switches have the same
functions as SCALANCE X-200 switches. Their type of construction in the slim design of the ET 200S distributed I/O
(degree of protection IP20) makes them ideal for space-saving
use in small control boxes.
SCALANCE X-300 managed
Networking of subsystems/plant areas, as well as interfacing
to the enterprise network. The SCALANCE X-300 managed
product line combines the firmware functionality of the
SCALANCE X-400 line with the compact design of the
SCALANCE X-200 line. As a result, SCALANCE X-300 switches
feature expanded management functions and enhanced firmware functionality compared to SCALANCE X-200 switches.
Electrical and optical Gigabit Ethernet ports are also available.
The SCALANCE XR-300 Industrial Ethernet switches correspond functionally to the SCALANCE X-300 switches. As rack
switches, they are especially suited for use in 19" control cabinets. They are also fully modular, and due to their 2-port media modules (electrical and optical) they can be adapted to the
respective task.
ECC (Enhanced Environmental Conditions) versions may be
used in compact and rack designs for application in power
plants and under difficult environmental conditions.
SCALANCE XM-400 managed (layer 3)
For use in high-performance plant networks (e.g. with highspeed redundancy). Due to the modular structure with port
extender, the switches can be adapted to the task in question.
Since IT standards are supported (e.g. VLAN, IGMP, RSTP), the
seamless integration of automation networks into existing office networks is possible. Routing functions on layer 3 permit
communication between different IP subnetworks. A mobile diagnostics facility is implemented using NFC (Near Field Communication) and WLAN.
SCALANCE X-500 managed (layer 3)
For networking and structuring high-performance industrial
networks and for connecting office networks to automation
networks.
As a layer 3 switch, SCALANCE X-500 can be used as a central
component in backbone networks, e.g. when a high number
of slots is required, with extremely high transmission rates
(10 Gigabit Ethernet), or for redundant connection to an office infrastructure.
The rack switch (19" design) can be used flexibly to suit requirements thanks to its modular design and the plug-in
4-port media modules (electrical and optical). Routing functions on layer 3 permit communication between different IP
subnetworks.
SCALANCE X Industrial Ethernet switches
9
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
Overview
CSM
Network component
• Configuration of small networks
• Easy expansion of the number of ports for:
- Connection of local HMI systems
- Connection to higher-level networks
- Service/maintenance
• Space-saving design of SIMATIC
• Unmanaged Switch with local diagnostics
• Communications processor for interfacing with
PROFINET/Industrial Ethernet including
integral switch for:
- For interfacing with distributed I/O.
- Connection to higher-level networks
- IP routing
- Service/maintenance
• SIMATIC or PC module design
• Functions for network diagnostics
G_IK10_XX_10238
• Basis for integrated networking in industrial
automation - from the field to the management
level
• Network components optimized for various
applications:
- Small and large-scale structured networks
- Management functions
- Connection to IT networks
- Configuring of redundant networks
- Use with Industrial Ethernet and PROFINET
• Robust housing for harsh environments
• Graded diagnostics concept
Integral switch function
Criteria for selecting Industrial Ethernet switching components
Communications processors for SIMATIC with
integral switch
Managed switches for adding Industrial Ethernet/PROFINET
interfaces to the SIMATIC and for integrating the controllers
into existing line or ring topologies. Thanks to integral Layer 3
functionality, the Advanced-CPs can also be used as routers
between IP subnets.
Communications processors for PCs with
integral switch
Managed switches for adding Industrial Ethernet/PROFINET
interfaces to industrial PCs and for integrating PCs into existing line topologies.
Configuration of a SCALANCE XR-300
10
SCALANCE X Industrial Ethernet switches
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
CSM (Compact
Switch Module)
Integrated switch function
(communications processors)
T
INE
OF
PR
X-500 1)
managed
Operations Level
Network components (SCALANCE X)
CP 343-1
Advanced
XR-500
CP 443-1
Advanced
T
INE
OF
X-400 1)
managed
CP 1623/
CP 1628
XM-400
T
OF
PR
INE
X-300 1)
managed
Control Level
PR
CP 443-1
X-300
X-300EEC
XR-300/XR-300EEC
T
OF
INE
X-200 1)
managed
PR
CP 343-1
CP 343-1 Lean
XF-200
X-200
X-200PRO
XF204IRT
X-200IRT PRO
CM 1542-1
T
OF
X-200IRT 1)
managed
INE
X-200IRT
T
OF
PR
INE
X-100
unmanaged
Field Level
PR
X-100
XC100-4OBR
X-100
Media converter
X005
XB-000/XB-000G
LOGO!
CSM
CSM
CSM 377
1277
CP 1616
CP 1604
T
X-000
unmanaged
INE
G_IK10_XX_10237
OF
PR
1) additionally supports PROFINET diagnostics
Overview of SCALANCE X Industrial Ethernet switches and SIMATIC components with switch functionality
SCALANCE X Industrial Ethernet switches
11
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
●
●
●
X-300
X-300EEC/
XR-300EEC
X-200
X204RNA
●
●
PC-based applications
High-performance plant network with high
emphasis on functionality and availability
Network setup using
SIMATIC S7
X-400
Internal machine
networking
●
High-volume machine
building
●
Plant subnetworking
●
Machine building and
plant engineering
Industry-related
applications
High-performance backbone networks with very
high emphasis on functionality / port density /
availability and interface to IT network
Wind energy plants
Plant networking
X-500
Application areas / type of network /
requirements
Energy generation
and distribution
Office incorporation
Overview
●
Large networks with high emphasis on functionality and availability
●
Networks with higher emphasis on functionality
and availability
●
X204RNA
EEC
●
●
●
●
●
●
●
X-100
Networks with low emphasis on functionality
X-000
Networks with low emphasis on functionality and
robustness
CSM
Very small networks or interface expansion
for SIMATIC S7
●
CPs
Very small networks through integrated switch
in CP
●
●
●
●
● applies
●
●
●
X-300EEC/
XR-300EEC
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
X-200
2)
●
X204RNA
X204RNA
EEC
●
X-100
●1)
X-000
●
CSM
CPs
3)
●
● applies
1) with Gigabit version
SCALANCE X Industrial Ethernet switches: Function overview
12
SCALANCE X Industrial Ethernet switches
2) with IRT version
●
3) SIMATIC S7 Advanced CPs only
●
●
Time synchronization
according to
IEEE 1588
●
PROFINET IO Device
●
Diagnosis
●
Office features (VLAN)
X-300
●
●
Layer 3
●
Isochronous
Real-Time (IRT)
●
●
Can be used under
Enhanced Environmental Conditions
(EEC)
Support of
Gigabit Ethernet
●
X-400
Features
Power-over-Ethernet
19“ design
X-500
Additional interface for
SIMATIC S7
Modular through
media modules
SCALANCE X Industrial Ethernet switches: Areas of application
●
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
Compact Switch Modules LOGO! CSM, CSM 1277, and CSM 377
The Compact Switch Modules LOGO! CSM, CSM 1277, and
CSM 377 are unmanaged switches for simple and rapid connection of a LOGO!, SIMATIC S7-1200, S7-300, or ET 200M
to an electrical Industrial Ethernet network. The low-cost
switches are thus suitable for the integration of small machines into existing automation networks, for stand-alone
operation of machines, or to set up small, local Ethernet networks.
Industrial Ethernet
SIMATIC S7-1200
with CSM 1277
SIMATIC S7-1200
with CSM 1277
SIMATIC S7-1200
with CSM 1277
Properties at a glance
LOGO! CSM unmanaged
■
Multiplication of the Ethernet interfaces of a LOGO!
logic module. One port is on the front for easy diagnostics access
■
Two versions for the voltage ranges 12/24 V DC or
230 V AC/DC
■
Low-cost solution for implementing small, local
Ethernet networks
G_IK10_XX_10271
CSM 1277 unmanaged
Field PG
Connection of SIMATIC S7-1200 with CSM 1277 to Industrial Ethernet
with line topology
■
Saving on installation costs and installation space
compared to the use of an external network
component
■
Multiplication of the Ethernet interfaces on a
SIMATIC S7-1200 for additional connection of programming devices, operator controls, and other
Ethernet nodes
■
Lowest-cost solution for implementing small,
local Ethernet networks with a SIMATIC S7-1200
wjGž›Gz{lwG^
z^TZWWGž›
jztGZ^^Gˆ•‹
jwGZ[ZTX
z^TZWW
ž›GjwG
l{GYWW—™–
l{GYWWz
wyvmpul{
p•‹œš›™ˆ“Gl›Œ™•Œ›
n†prXW††XWYYZ
l{GYWW—™–
CSM 377 unmanaged
■
Integration into SIMATIC S7-300 and ET200 M for
implementing small, local Ethernet networks
■
Diagnostics on the device by means of LEDs (power,
link status, data communication)
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
Connection of SIMATIC S7-300 with CSM 377 to Industrial Ethernet
with linear structure
SCALANCE X Industrial Ethernet switches
13
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-000 unmanaged
The Industrial Ethernet switch SCALANCE X005 is an unmanaged switch with five RJ45 ports, 10/100 Mbps. The product is
a low-cost solution for establishing small star or line topologies with switching functionality in machines islands or process
cells. SCALANCE X005 has a rugged metal housing (IP30) for
space-saving installation in the control cabinet, on standard
rails or S7-300 rails, or for direct wall mounting.
Properties at a glance
■
Diagnostics on the device by means of LEDs
(power, link status, data communication)
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Use in railway and traffic applications
The following versions are available:
• SCALANCE X005 with five electrical ports (RJ45)
• SCALANCE X005TS (Transportation Systems) with five
electrical ports (RJ45);
suitable for use in railroad and traffic applications with
extended temperature range in accordance with EN 50155
and e1/E1
PC with
CP 1613 A2/
CP 1623
S7-200 with CP 243-1
SCALANCE
X005
IPC with
CP 1613 A2/
CP 1623
Panel PC
Star topology with SCALANCE X005
14
SCALANCE X Industrial Ethernet switches
G_IK10_XX_30039
S7-1200 with
CSM 1277
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE XB-000 unmanaged
The SCALANCE XB-000 Industrial Ethernet switches are compact, unmanaged switches with up to eight ports that enable
low-cost establishment of Industrial Ethernet line and star topologies. They have a rugged plastic enclosure (IP20) and save
space when installed on standard mounting rails in the control
cabinet or control box. The SCALANCE XB-000 switches are
available in electrical and electrical/optical versions:
• SCALANCE XB005 with five electrical ports
• SCALANCE XB008 with eight electrical ports
• SCALANCE XB004-1/XB004-1LD with four electrical and
one optical port (SC)
For Gigabit cabling (10/100/1000 Mbps), the following
versions are available:
1000 Mbit/s
SCALANCE
X308-2
PC with
CP 1623
SCALANCE
XB005G
1000 Mbit/s
1000 Mbit/s
Code
reader
IP camera
MV420
SCALANCE
XB005
PLC
Industrial Ethernet (Twisted Pair)
Industrial Ethernet (Fiber Optic)
Operator control
and process
monitoring
Field devices
Industrial Ethernet
Electrical and optical subnet with SCALANCE XB005G
and SCALANCE X308-2
n†prXW††XWY]W
PC
Conveyor belt
G_IK10_XX_10259
MV440
• SCALANCE XB005G with five electrical ports
• SCALANCE XB008G with eight electrical ports
• SCALANCE XB004-1G/XB004-1LDG with four electrical
ports and one multimode glass FOC port (SC)
Star topology with SCALANCE XB005
Properties at a glance
■
Diagnostics on the device by means of LEDs
(power, link status, data communication)
■
Integrated autocrossover function makes the use
of uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
SCALANCE X Industrial Ethernet switches
15
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-100 unmanaged
IPC with
CP 1613 A2/
CP 1623
S7-400 with
CP 443-1 Advanced
MP 377
S7-300 with
CP 343-1
SCALANCE
W786
S7-400 with
CP 443-1 Advanced
Switching cabinet
S7-300 with
MP 377
CP 343-1
S7-300 with CP 343-1
S7-1200 with
CSM 1277
SCALANCE
X108PoE
SCALANCE
X112-2
SCALANCE
X104-2
SCALANCE
X106-1
PROFINET
10/100 Mbit/s
Industrial Ethernet FC Cable 2x2
Power over Ethernet
G_IK10_XX_10261
Industrial
Ethernet
Industrial Ethernet (Twisted Pair)
Industrial Ethernet (Fiber Optic)
Electrical and optical line topology with SCALANCE X-100 and Power-over-Ethernet
The unmanaged switches of the SCALANCE X-100 product
range with up to 24 ports are very suitable for setting up line
and star structures (10/100 Mbps) and perfect for the on-site
diagnostics in machine-level applications.
Properties at a glance
■
Diagnostics on the device by means of LEDs
(power, link status, data communication) and signaling contact (signaling mask can be set on site using
buttons)
■
Redundant power supply
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Power supply of up to two Power-over-Ethernetenabled terminal devices via four-core data line
(SCALANCE X108PoE only)
They are suitable for industry and save room in the control
cabinet with their compact housing.
The SCALANCE X-100 switches are available in electrical and
electrical/optical versions:
•
•
•
•
SCALANCE X108/X108PoE with eight electrical ports
SCALANCE X116 with 16 electrical ports
SCALANCE X124 with 24 electrical ports
SCALANCE X104-2 with four electrical and two
optical ports (BFOC)
• SCALANCE X106-1 with six electrical and one
optical port (BFOC)
• SCALANCE X112-2 with twelve electrical and two
optical ports (BFOC)
16
SCALANCE X Industrial Ethernet switches
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-100 media converter
Media converter for converting electrical signals to optical signals and for connecting existing networks, e.g. AUI networks.
The SCALANCE X101-1POF media converter is ideally suitable
for integrating devices with POF interfaces into existing network structures.
The unmanaged Industrial Ethernet media converters of the
SCALANCE X-100 product line are ideally suited to the conversion of different transmission media in Industrial Ethernet networks at 10/100 Mbps in line, star and ring topologies. They
are suitable for industry and save room in the control cabinet
with their compact housing.
Die SCALANCE X-100 media converters are available in the following versions depending on whether ports are electrical or
optical, and they are used to connect existing 10 Mbps fiberoptic networks or existing 10Base5 networks (e.g. SINEC H1):
Properties at a glance
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
RJ45 sockets with a sleeve for additional strain relief,
designed for PROFINET-compliant IE FC RJ45 plug
■
Redundant power supply
1
SCALANCE X101-1LD
1
SCALANCE X101-1POF
1
SCALANCE X101-1AUI
1
Multimode Singlemode Multimode
BFOC
BFOC
BFOC
1
1
1
1
SCALANCE X101-1FL
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ring redundancy
without RM
POF / PCF
On-site display
(SET button)
SCALANCE X101-1
AUI
10 Mbit/s
Signaling contact
RJ45
100 Mbit/s
2 x 24 V DC
10 / 100 Mbit/s 10 Mbit/s
SIMATIC environment
Fast Ethernet
LED diagnostics
Characteristics
Fiber Optic
Compact enclosure
Type and number of ports
Twisted Pair
•
•
•
•
•
G_IK10_XX_10137
• SCALANCE X101-1 with one electrical 10/100 Mbps RJ45
port and one 100 Mbps multimode interface
(BFOC connection system)
• SCALANCE X101-1LD with one electrical 10/100 Mbps RJ45
port and one 100 Mbps singlemode interface
(BFOC connection system)
• SCALANCE X101-1POF with one 100 Mbps plastic optical
fiber (POF) interface (SC RJ connection system)
• SCALANCE X101-1AUI with one 10 Mbps AUI interface
(D-sub connection system)
• SCALANCE X101-1FL with one 10 Mbps multimode
interface (BFOC connection system)
Function overview of Industrial Ethernet media converters
SCALANCE X Industrial Ethernet switches
17
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE XC-100 unmanaged/SCALANCE XC100-4OBR unmanaged
SIMATIC
S7-1200
SIMATIC
S7-1200
SCALANCE
X320-3LD FE
SCALANCE
X320-3LD FE
SIMATIC
S7-1200
SCALANCE
X320-3LD FE
SCALANCE
XC100-4OBR
SCALANCE
XC100-4OBR
Industrial Ethernet
SCALANCE
XC100-4OBR
SCALANCE
XC100-4OBR
SIMATIC
S7-400
SCALANCE
X320-3LD FE
SIMATIC
S7-1200
SCALANCE
XR-300
SCALANCE
XC100-4OBR
SCALANCE
X320-3LD FE
SIMATIC
S7-1200
SCALANCE
X320-3LD FE
G_IK10_XX_10361
SCALANCE
XR-300 with
redundancy
manager
Redundant MRP network with SCALANCE XC100-4OBR in ring topology
The SCALANCE XC100-4OBR optical bypass relays are ideally
suitable as ballast in Industrial Ethernet networks in linear and
ring topologies with data transfer rates of 100/1000 Mbps,
especially networks with are difficult to access, for example in
pipelines or wind farms. They are used for uninterruptible connection and disconnection of network nodes, e.g. for maintenance work in MRP or HRP (high speed redundancy) rings.
Properties at a glance
■
Simple diagnostics via signaling contact and LED
on-site
■
Fast bridging of network nodes using optical relays
within 10 ms in the event of a fault
(e.g. power failure)
■
Maintenance of network communication thanks to
bridging of the failed network components
■
Use in harsh industrial environments thanks to wide
temperature range and coated PCBs
(conformal coating)
■
Combination with different network components
thanks to configurable reset delay by means of SET
pushbutton on the device
■
High device availability thanks to redundant voltage
infeed and large voltage range
(12 V DC, 24 V DC, 48 V DC)
Product versions:
SCALANCE XC100-4OBR with multimode fiber optic ports:
- For linear and ring topologies with four optical SC ports
SCALANCE XC100-4OBR with single-mode fiber-optic ports:
- For linear topologies with four optical SC ports
- For linear and ring topologies with SC ports and TAP function
18
SCALANCE X Industrial Ethernet switches
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-200 managed
S7-400
Operator Station
S7-300
ET 200MP
PC
SCALANCE
X204-2
SCALANCE
X206-1
S7-1500
SCALANCE
X206-1
S7-300
IPC
SCALANCE X208
PC
IPC
ET 200SP
Industrial Ethernet (Twisted Pair)
Industrial Ethernet (Fiber Optic)
S7-300
G_IK10_XX_10113
HMI
S7-400
High speed redundancy in the ring with electrical and optical paths
The managed switches of the SCALANCE X-200 product range
are very well suited for the setup of line, star, and ring topologies (10/100 Mbps).
Redundant ring topologies can be established via the
SCALANCE X-200 switches.
On the failure of a transmission link or a SCALANCE X-200
switch in the ring, the transmission path is reconfigured
within 200 ms.
With the C-PLUG swap medium, devices can be exchanged
without a programming device; the configuration or application data are secured on the C-PLUG and can be implemented
in another SCALANCE X-200 switch without special knowhow.
Based on PROFINET, the switches of the SCALANCE
X-200 product line can be easily integrated into the process
and system diagnostics.
The SCALANCE X-200 switches are available in electrical and
electrical/optical versions:
• SCALANCE X208 with eight electrical ports
• SCALANCE X204-2/X204-2LD with four electrical and
two optical ports (BFOC)
• SCALANCE X206-1/X206-1LD with six electrical and
one optical port (BFOC)
• SCALANCE X212-2/X212-2LD with 12 electrical and
two optical ports (BFOC)
• SCALANCE X216 with 16 electrical ports
• SCALANCE X224 with 24 electrical ports
SCALANCE X Industrial Ethernet switches
19
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-200 managed/SCALANCE XF-200 managed
SCALANCE X-200PRO managed
PROFINET diagnostics can also be carried out with the
SCALANCE X-200PRO.
• SCALANCE X208PRO with eight electrical ports
SCALANCE XF-200 managed
The SCALANCE XF-200 switches have an extra-flat design. These
industry-standard units with IP20 degree of protection and special
port arrangement with angled cable outlet allows easy installation of the switches in the control cabinet or control box.
In addition, they offer an integrated redundancy manager function, which allows the network to be reestablished within milliseconds following a fault.
Thanks to its rugged design, the SCALANCE X-200PRO Industrial
Ethernet switch with IP65 degree of protection allows the setup
of a star network topology outside the control cabinet. If needed,
the network can be powered by 24 V DC, or with 230 V AC using
the PS791-1PRO power supply.
The SCALANCE XF-200 switches are available in electrical and
electrical/optical versions:
• SCALANCE XF204 with four electrical ports
• SCALANCE XF208 with eight electrical ports
• SCALANCE XF204-2 with four electrical and two optical
ports (BFOC)
• SCALANCE XF206-1 with six electrical ports and one optical
port (BFOC)
ET 200pro
S7-300 with CP 343-1
ET 200pro
Heavy gauge threaded joint
Operator control
and monitoring
Field PG
ET 200S
IPC with
CP 1616
SCALANCE
X208PRO
Power Supply
PS791-1PRO
230 V AC
SCALANCE
W788
24 V DC
PROFINET
230 V AC
Industrial Ethernet
Configuration for cabinet-free setup with SCALANCE X208PRO with IP65 degree of protection
20
SCALANCE X Industrial Ethernet switches
Mobile Panel
277 IWLAN
G_IK10_XX_10078
24 V DC
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-200IRT managed/SCALANCE XF-200IRT managed
SCALANCE X-200IRT managed
SCALANCE XF-200IRT managed
Control cabinet
PROFINET
SCALANCE
XF204IRT
Industrial
Ethernet
ET 200S
SIMATIC Microbox with
CP 1604 as PN IO-Controller
PC with CP 1616
as PN IO controller
PROFINET
Industrial Ethernet
Field PG
SCALANCE
X204IRT
SCALANCE
X204IRT
Control cabinet
ET 200S
ET 200S
TP 177B
G_IK10_XX_10256
IPC with CP 1616
as PN IO device
ET 200S
G_IK10_XX_10100
SCALANCE
XF204IRT
Configuration example for SCALANCE X204IRT
Use of SCALANCE XF-200/XF-200IRT in slim control boxes
With the versions SCALANCE X-200IRT, real time and isochronous real time networks can be set up. As a result, one network is available for hard real-time and standard data transmission (TCP/IP), preventing the need for a double infrastructure.
Thanks to the advantages of its slim design, the SCALANCE XF204IRT switch allows the setup of real-time and isochronous
real-time networks. As a result, one network is available for
hard real-time and standard data transmission (TCP/IP), preventing the need for a double infrastructure.
Redundant ring topologies can be set up and two sub-networks, e.g. rings, can be connected redundantly via the
SCALANCE X-200IRT switches (standby function).
Redundant ring topologies can be set up and two subnets, e.g.
rings, can be connected redundantly (standby function).
Fast Start-Up
On the failure of a transmission link or a SCALANCE X-200
switch in the ring, the transmission path is reconfigured
within 200 ms.
The SCALANCE X-200IRT switches are available as electrical
and electrical/optical versions with degrees of protection IP30
and IP65:
• SCALANCE X204IRT/X204IRT PRO
with four electrical ports
• SCALANCE X201-3P IRT/X201-3P IRT PRO
with one electrical port and three optical ports (POF/PCF)
• SCALANCE X200-4P IRT with four optical ports (POF/PCF)
• SCALANCE X202-2IRT/X202-2P IRT/X202-2P IRT PRO
with two electrical and two optical ports (BFOC or POF/PCF)
In modern manufacturing applications, the installed robots
use different tools depending on the task. For this, a fast power-up of the components on the robot tools is necessary.
The power-up behavior (link building, data forwarding) of
PROFINET network components and I/O devices has been optimized with the new Fast Start-Up (FSU) functionality.
Depending on the peripheral devices used, the start-up can
occur within 500 ms after power is applied and the components are included in the data exchange.
The demand for very short cycle times in production is met not
only by PROFINET IO controllers and I/O devices, but also by
SCALANCE X switches with integrated ERTEC and IRT functionality.
SCALANCE X Industrial Ethernet switches
21
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-200IRT managed/SCALANCE XF-200IRT managed
Operator Station
Operator Stations
S7-300
SCALANCE
X208
SCALANCE
X204IRT
Industrial Ethernet / PROFINET (Twisted Pair)
Industrial Ethernet / PROFINET (Fiber Optic)
100 Mbit/s
SCALANCE X208
S7-1500
SCALANCE X202-2IRT
as standby master
S7-1500
SCALANCE X202-2IRT
as standby slave
100 Mbit/s
S7-400
SCALANCE
X204-2
SCALANCE
X202-2IRT
S7-1500
G_IK10_XX_10173
IPC
Redundant coupling of two subnets with SCALANCE X-200IRT
Properties at a glance
■
■
22
Fast Start-Up for optimized start-up behavior (link
building, data forwarding) of PROFINET network
components and I/O devices
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
Redundant power supply
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
SCALANCE X Industrial Ethernet switches
■
Integrated redundancy manager for constructing Fast
Ethernet ring topologies with high-speed media
redundancy.
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and autonegotiation function
■
Remote diagnostics is performed by means of SNMP,
web browser and PROFINET IO diagnostics
■
Integrated configuration and diagnostics in STEP 7
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function
■
C-PLUG swap medium for rapid replacement of devices
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-300 managed
PC
PC
SCALANCE
XM416-4C
SCALANCE
XM416-4C
Control cabinet
Control cabinet
SCALANCE
X308-2
Control cabinet
SCALANCE
X308-2
S7-400
SCALANCE
XR324-12M
S7-300
HMI
S7-400
S7-1500
ET 200SP
ET 200SP
ET 200SP
PC
G_IK10_XX_10215
S7-400
Industrial Ethernet / PROFINET (Twisted Pair)
Industrial Ethernet / PROFINET (Fiber Optic)
Integration of control cabinets with SCALANCE X-300 in an optical Gigabit ring
The compact Gigabit switches of the SCALANCE X-300 product
range are Industrial Ethernet switches for setting up line, star,
and ring topologies (10/100/1000 Mbps) for high-performance networks. They enable the construction of optical
and/or electrical networks with high network availability,
since, for example, they enable ring redundancy in combination with a redundancy manager function and have a redundant power supply.
With the C-PLUG swap medium, devices can be exchanged
without programming device; the configuration or application data are secured on the C-PLUG and can be implemented
in another SCALANCE X-300 switch without special expertise.
The gigabit ports are typically used for connecting the switches to each other and for a possible connection to higher network levels.
The following network topologies and combinations of topologies are possible:
• Fast Ethernet and Gigabit Ethernet rings with fast media
redundancy. To protect against failure of a transmission link
or a switch, as many as 50 SCALANCE X-300 switches cascaded in line can be connected into a ring. On the failure of
a transmission link or a SCALANCE X-300 switch in the ring,
the transmission path is reconfigured within 200 ms
• Redundant connection of the ring topology to the corporate network using Rapid Spanning Tree Protocol (RSTP)
• Redundant linking of subnets, e.g. ring topologies
(standby redundancy)
• Star topology with SCALANCE X-300 switches:
Each SCALANCE X-300 switch represents a star point which
can interconnect nodes or subnets electrically or optically
• Problem-free connection of existing twisted-pair terminal devices or existing network segments at 10/100/1000 Mbps
• High availability of the network thanks to
- Redundant power supply
- Redundant network structures based on fiber-optic or
twisted pair cables
SCALANCE X Industrial Ethernet switches
23
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-300 managed
Switches with Fast Ethernet and Gigabit Ethernet ports
Fast Ethernet switches
SCALANCE X310
• Three Gigabit ports
• Seven Fast Ethernet ports
SCALANCE X310FE
• Ten electrical Fast Ethernet ports
SCALANCE X308-2
• Two optical Gigabit ports (SC multimode, up to 750 m)
• One electrical Gigabit port (RJ45)
• Seven Fast Ethernet ports
SCALANCE X308-2LD
• Two optical Gigabit ports (SC singlemode, up to 10 km)
• One electrical Gigabit port (RJ45)
• Seven Fast Ethernet ports
SCALANCE X308-2LH / SCALANCE X308-2LH+
• Two optical Gigabit ports (SC singlemode)
- SCALANCE X308-2LH: Up to 40 km
- SCALANCE X308-2LH+: Up to 70 km
• One electrical Gigabit port (RJ45)
• Seven Fast Ethernet ports
SCALANCE X307-3 / SCALANCE X307-3LD
• Three optical Gigabit ports (SC multimode)
- SCALANCE X307-3: Up to 750 m
- SCALANCE X307-3LD: Up to 10 km
• Seven Fast Ethernet ports
24
SCALANCE X Industrial Ethernet switches
SCALANCE X306-1LD FE
• Six electrical Fast Ethernet ports
• One optical port (SC, singlemode, up to 26 km)
SCALANCE X320-1FE
• Twenty electrical Fast Ethernet ports
• One optical port (SC, multimode, up to 5 km)
SCALANCE X320-3LD FE
• Twenty electrical Fast Ethernet ports
• Three optical ports (SC, multimode, up to 5 km)
Full Gigabit Ethernet switches
SCALANCE X308-2M
• Four electrical Gigabit ports
• Two free module slots for 4 x 10/100/1000 Mbps media
modules (electrical or optical)
SCALANCE X308-2M TS (Transportation Systems)
• Four electrical Gigabit ports
• Two free module slots for 4 x 10/100/1000 Mbps media
modules (electrical or optical)
• Suitable for use in railroad applications in accordance with
EN 50155
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE XR-300 managed
The SCALANCE XR-300 is an industry-standard Industrial Ethernet
19" rack switch with IP20 degree of protection that features IT
functions such as VLAN, IGMP Snooping/Querier or STP/RSTP.
The main application areas for the SCALANCE XR-300 switches
are high-performance plant networks with a connection to the
enterprise network, as well as power distribution centers. Thanks
to the compact, space-saving 19" design, the SCALANCE XR-300
can be installed in 19" control cabinets.
SCALANCE XR-300 switches permit the configuration of
switched networks at the field level and control level, which
not only demand high availability of the network and extensive
diagnostic options, but also high transmission rates.
The use of media modules supports unlimited flexibility in expansion (e.g. more terminal devices) or conversion of the network
(e.g. conversion from copper to fiber-optic conductors).
SCALANCE XR324-12M or XR324-12M TS
(12 media modules)
Optical Industrial Ethernet line, ring or star topologies are constructed using the SCALANCE XR324-12M or XR324-12M TS
(transportation system) switches with 24 ports, of which 12
are media module slots.
The switches can be equipped with electrical and/or optical
2-port media modules. Media modules with coated PCBs are
also suitable for railway applications and correspond to the requirements of EN 50155.
Space is also saved in the control cabinet due to the flexible
cable outlet on the front or rear of the device.
LEDs, connections for the power supply and data cable outlet
are installed − depending on the device variant − on the front
or rear.
The power supply is alternatively from
• 1 x 24 V DC power supply unit
• 1 x 110 to 230 V AC power supply unit
)RUYHUVLRQVFRQWDLQLQJFDEOHRXWOHWDWWKHUHDU
RQO\WKH/('ILHOGDQG6(/(&76(7EXWWRQVDV
ZHOODVWKHVHULDOFRQVROHSRUW5-DUHDWWKH
IURQW
)URQW
5HDU
&RQQHFWLRQH[DPSOH
,()&5-3OXJ)DVW&RQQHFWFRQQHFWRU
WR00&8&PHGLDPRGXOH
ZLWKUHWDLQLQJFROODU
&RQQHFWLRQH[DPSOH
)&%)2&3OXJ)DVW&RQQHFWFRQQHFWRU
WR00PHGLDPRGXOH
PXOWLPRGH
G_IK10_XX_10283
6ORWIRU
&3/8*
SCALANCE XR-300 with data cable outlet at rear
SCALANCE X Industrial Ethernet switches
25
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-300 managed
SCALANCE X-300PoE / XR-300PoE managed
SCALANCE XR324-4M PoE or XR324-4M PoE TS
19" Industrial Ethernet switches with
The SCALANCE X-300PoE product line for constructing electrical and/or optical line, star and ring topologies operating at
10/100/1000 Mbps has the functionality of SCALANCE X-300.
SCALANCE X308-2M PoE
Compact Industrial Ethernet switch with
• Four RJ45 ports incl. Power-over-Ethernet functionality
(according to IEEE 802.3at Type 1, corresponding to
IEEE 802.3af) for the supply of power to terminal devices
(up to 15 W each)
• Two slots for any type of 2-port media module
• Eight permanently integrated RJ45 ports incl. Power-overEthernet functionality (according to IEEE 802.3at Type 1,
corresponding to IEEE 802.3af) for the supply of power to
terminal devices (up to 15 W each)
• Eight permanently integrated RJ45 ports without Powerover-Ethernet functionality
• Four slots for any type of 2-port media module
The modularity offered by the use of media modules enables
the network to be perfectly adapted to the application. This
means that a network can be easily expanded or converted,
e.g. to Gigabit Ethernet or from multimode to singlemode fiber-optic cables. The versions for transportation systems correspond to the requirements of EN 50155.
The SCALANCE X308-2M PoE and XR-300PoE switches supply
PoE-compatible devices, such as IWLAN access points
SCALANCE W, IP cameras or IP telephones, with energy over
the data cable and are suitable for constructing electrical
and/or optical Industrial Ethernet line, star or ring topologies.
Office
IP
Phone
HiPath
Access
Point
PoE
PoE
SCALANCE
X308-2M PoE
Factory
SCALANCE
XR324-4M PoE
Factory
Code
Reader
Outdoor
SCALANCE
W788
PoE
SCALANCE
W786
PoE
SCALANCE
X108PoE
PoE
PoE
Industrial Ethernet / PROFINET (Twisted Pair)
Industrial Ethernet / PROFINET (Fiber Optic)
Supply of terminal devices with Power-over-Ethernet by means of PoE-compatible switches
26
SCALANCE X Industrial Ethernet switches
IP Camera
PoE
G_IK10_XX_10286
PoE
IP Fixdome
Camera
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-300EEC/XR-300EEC managed
The switches of the SCALANCE X-300EEC/XR-300EEC
(Enhanced Environmental Conditions) product line are managed Industrial Ethernet switches with degree of protection
IP30 or IP20. They are designed for use in harsh industrial environments as well as in power switchgear, for example. They permit the communication of switching and protection devices in
low-voltage and high-voltage switchgear. The switches meet all
the necessary EMC approvals for this field of application (IEC
standard 61850-3). The devices for increased availability requirements are offered with redundant wide-range power supplies (for 60 V to 250 V DC / 100 V to 240 V AC).
SCALANCE X-300EEC switches with conformal coating can also
be used in harsh environments.
Operator station
SCALANCE X307-2EEC and SCALANCE X302-7EEC
compact devices
• Seven electrical (RJ45) and two optical (LC) ports
• Seven optical and two electrical ports
Modular 19" rack device SCALANCE XR324-4M EEC
(four media module slots)
• 16 electrical (RJ45) ports
• Eight modular ports which can be equipped with 2-port
media modules
The SCALANCE XR324-4M EEC is available with front or rear
cable outlet. In the version with rear cable outlet, the cables
are located in the back of the control cabinet and the devices
can be diagnosed by means of LEDs on the front. As a star coupler in the plant bus (redundant connection possible), it is designed specifically for use in power distribution plants.
Operator station
Engineering station
SCALANCE X307-2EEC
SCALANCE X307-2EEC
Master computer for power switchboards
SCALANCE
X307-2EEC
SCALANCE
XR324-4 MEEC
SIPROTEC with IEEE 618501 protocol
SCALANCE
XR324-4 MEEC
SIPROTEC with IEEE 618501 protocol
Enhanced
Environmental
Conditions
G_IK10_XX_10278
Industrial
Ethernet
Use of SCALANCE X-300EEC and XR-300EEC in power switchgear
SCALANCE X Industrial Ethernet switches
27
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-300 managed
Properties at a glance
■
Simple adaptation to the structure of a plant thanks
to the modularity offered by 2-port media modules
■
Remote diagnostics is performed by means of SNMP,
web browser and PROFINET IO diagnostics
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
Integrated configuration and diagnostics in STEP 7
■
Integrated redundancy manager for constructing Fast
Ethernet and Gigabit Ethernet ring topologies with
high-speed media redundancy
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function
■
C-PLUG swap medium for rapid replacement of
devices
■
Multicast and broadcast limitation
■
Support of VLAN permits integration into enterprise
security policies
■
IGMP Snooping and IGMP Query support Multicast
filtering and limiting
■
Redundant power supply
■
Reduction of the network installation costs due to
savings in power cables and additional network components when Power-over-Ethernet is used
■
High flexibility thanks to variable mounting options
of the power supply unit, and choice between front
or rear cable outlet on the device (depending on the
device variant)
■
28
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
SCALANCE X Industrial Ethernet switches
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
Media modules for modular SCALANCE X-300 managed switches
Different 2-port media modules support versatile configuration of the partly and fully modular switches
• SCALANCE X308-2M/X308-2M TS/X308-2M PoE and
• SCALANCE XR-300/XR-300PoE/XR-300EEC
The media modules are available both as electrical versions
with RJ45 ports and as optical versions with BFOC, SC and LC
ports for the use of multimode and singlemode fiber-optic
cables.
MM992-2CUC / MM992-2VD with
RJ45 ports and retaining sleeve
MM992-2 media module with
SC ports
MM991-2 media module with
BFOC ports
MM992-2SFP media module with
SFP transceiver (LC ports)
The media modules with coated PCBs (conformal coating) are
also available for railway applications. In addition, the media
module MM992-2VD (variable distance) enables the transmission of Industrial Ethernet data message frames via existing
2-wire cables.
Using a 2-port SFP media module (Small Form-Factor
Pluggable) the optional use of fiber optic SFP plug-in transceivers with LC connection technology is possible.
Their versatility (electrical/optical, multimode/singlemode,
Fast Ethernet, Gigabit Ethernet) with media modules which
can be differently equipped allows significantly reduced stocking of device variants.
6)3PHGLDPRGXOHV
WZR6)3VORWVDUH
LQVHUWHGLQWRWKHGHYLFH
(OHFWULFDO
SRUWPHGLDPRGXOHV
DUHLQVHUWHGLQWRWKH
GHYLFH
2SWLFDO
6)3SOXJJDEOHWUDQVFHLYHUV
RQHSRUWDUHLQVHUWHGLQWR
WKH6)3PHGLDPRGXOH
G_IK10_XX_10282
2SWLFDO
SRUWPHGLDPRGXOHV
DUHLQVHUWHGLQWRWKH
GHYLFH
Insertion of 2-port media modules in media module slot
SCALANCE X Industrial Ethernet switches
29
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-400 managed (layer 3)
The modular switches of the SCALANCE XM-400 product
range are Industrial Ethernet switches for setting up line, star,
and ring topologies (10/100/1000 Mbps) for high-performance networks. The SCALANCE XM-400 switches are highly
suitable for higher-level hall networks, building control systems and infrastructures, central control rooms and stations,
and transportation, for example in tunnel projects.
The SCALANCE XM-400 switches allow flexible setup of optical or electrical networks which can be adapted in their topology, port number, and port type to the respective network
structures. They allow high network availability, for example
because they enable ring redundancy in combination with a
redundancy manager function, have a redundant power supply, or allow the exchange and expansion of extender modules during operation.
Product versions
SCALANCE XM-400 switches offer
SCALANCE XM-400 basic devices:
• A modular structure in which extender modules can be inserted in the switch as required. These expansions make as
many as 24 electrical and 8 optical ports additionally available
• Comboports as alternative use of the electrical or optical
ports depending on requirements
• Ports which are all gigabit; they can be typically used for
connecting the switches to each other and for a possible
connection to higher network levels
• The NFC function (Near Field Communication); fast access
to the web-based management of the SCALANCE XM-400
via mobile websites. The function can be started with
WLAN and an NFC-compatible smart phone or tablet
• Layer 3 functions such as VLAN, real-time communication
via PROFINET, diagnostics functions or ring redundancy;
they can be enabled with the KEY-PLUG optional routing
swap medium with more than 4000 hardware routes and
127 routing interfaces
• The C-PLUG swap medium; devices can then be exchanged
without a programming device; the configuration or application data is saved on the C-PLUG and can be implemented in another SCALANCE XM-400 switch without
special know-how
30
SCALANCE X Industrial Ethernet switches
• SCALANCE XM416-4C
16x RJ45 ports
4x SFP ports as comboports (16 active ports)
• SCALANCE XM408-8C
8x RJ45 ports
8x SFP ports as comboports (8 active ports)
• SCALANCE XM404-8PoE*
4x RJ45 ports
8x SFP ports as comboports with Power-over-Ethernet
(8 active ports)
SCALANCE XM-400 extender modules:
• PE408 port extender with eight additional RJ45 ports
• PE400-8SFP port extender with eight additional slots for
SFP plug-in transceivers, optionally for 1 GE SFP transceiver
• PE408PoE port extender* with eight RJ45 ports with Powerover-Ethernet
A maximum of 24 ports can be operated.
*
Available soon
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
Factory Backbone
(10 Gbit/s)
SCALANCE XR552-12M
SCALANCE XR552-12M
Ethernet
Subnet 1
Building Backbone
(1000 Mbit/s)
SCALANCE XM-400 with
Port Extender PE408
Industrial Ethernet
SCALANCE XM-400
SCALANCE XM-400
SCALANCE XM-400
SCALANCE X308-12M
SCALANCE X308-12M
SCALANCE X308-12M
Subnet 2
Subnet 3
Subnet 4
G_IK10_XX_10204
Control Level
(100 - 1000 Mbit/s)
Configuration of a network with SCALANCE XM-400
Mobile website of SCALANCE XM-400
SCALANCE X Industrial Ethernet switches
31
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-400 managed (layer 3)
Properties at a glance
■
Simple adaptation to the structure of a plant thanks to
the modularity offered by port extenders
■
Diagnostics on the device by means of LEDs
(power, link status, data communication) and signaling contact (signaling mask can be set on site using
buttons)
■
■
32
High availability of the network thanks to
– Redundant power supply
– Integrated redundancy manager for constructing
Fast Ethernet and Gigabit Ethernet ring topologies
with high-speed media redundancy
– Easy device replacement by means of plug-in
C-PLUG/KEY-PLUG swap medium
– Very fast reconfiguration of the network in event
of a fault
RJ45 sockets with retaining sleeve for additional strain
relief, designed for PROFINET-compliant IE FC RJ45 plug
■
Comboports as alternative use of the electrical or
optical ports depending on requirements
■
NFC (Near Field Communication) for fast reading-out
of data onto a smart phone or tablet for easy monitoring and diagnostics of the device and network
■
Space-saving SIMATIC S7-1500 design
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
SCALANCE X Industrial Ethernet switches
■
Automatic detection and negotiation of the data transmission rate by means of autosensing and autonegotiation function
■
Remote diagnostics is performed by means of SNMP,
web browser and PROFINET IO diagnostics
■
High flexibility due to variable installation options
■
Integrated redundancy manager for constructing Fast
Ethernet and Gigabit Ethernet ring topologies with
high-speed media redundancy
■
Integrated configuration and diagnostics in the
TIA Portal
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function
■
Multicast and broadcast limitation
■
Support of VLAN permits integration into enterprise
security policies
■
IGMP Snooping and IGMP Query support Multicast
filtering and limiting
■
Optional layer 3 functionality can be activated via
KEY-PLUG XM-400
■
Use in all Industrial Ethernet networks based on the
IEEE 802.3 standard
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-500 managed (layer 3)
SCALANCE X-500 switches are fully modular, high-performance, and industry-standard switches for the construction of
electrical and optical line, ring and star topologies with transfer rates of up to 10 Gbps, designed for installation in 19" control cabinets.
The SCALANCE X-500 switches are ideal for use in industrial
networks and for integrating the industrial network into an
existing corporate network. From the control level to the management level, the switch handles the networking of plant
sections as well as distributed field devices and ensures high
plant availability with extensive diagnostics options and high
transmission speeds.
The KEY-PLUG swap medium activates layer 3 switching functions, and is able like the C-PLUG to save configuration data
(easier device replacement in event of fault).
The SCALANCE X-500 switches are suitable for setting up electrical and optical Industrial Ethernet line, star and ring topologies, and they are available with the following port types for
multimode or singlemode connections:
• Four SFP+ slots for optical SFP+ or SFP plug-in transceivers
- The SFP+ plug-in transceivers support 10 Gbps
- The SFP plug-in transceivers support 1000 Mbps
• Up to 12 slots for electrical 4-port media modules, electrical
PoE 4-port media modules and optical 4-port media modules (with different connection methods);
- For industrial applications, the RJ45 sockets are also
available with additional retaining sleeve for connection
of the Industrial Ethernet FC RJ45 Plug 180
- All electrical Ethernet interfaces support
10/100/1000 Mbps, all optical Ethernet interfaces support 100 or 1000 Mbps.
Product versions
SCALANCE XR552-12M
• LEDs and data cable outlet on the front
• Alternatively: LEDs on the front and data cable outlet at
the rear
• Connection of power supply unit at rear or above/below
the switch
• Four SFP+ slots for equipping with 10 Gigabit
Ethernet SFP+ plug-in transceivers or Gigabit SFP plug-in
transceivers
• 12x 4-port media module slots
SCALANCE XR528-6M
• LEDs and data cable outlet on the front
• Alternatively: LEDs on the front and data cable outlet at
the rear
• Connection of power supply unit at rear or above/below
the switch
• Four SFP+ slots for equipping with 10 Gigabit Ethernet
SFP+ plug-in transceivers or Gigabit SFP plug-in
transceivers
• 6x 4-port media module slots
The use of media modules or SFP+/SFP enables the following:
• Extension of networks by subsequent insertion of additional media modules in unused media module slots
• Changing of cabling technology, such as conversion from
copper to fiber-optic cables, or from multimode to singlemode FOC
• Changing of the transfer rate, e.g. from 1000 Mbps to
10 Gbps
SCALANCE X Industrial Ethernet switches
33
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X-500 managed (layer 3)
Management Level
Server
Server
Server
Server
Server
1000 Mbit/s
SCALANCE
XR-500
Operations Level
1000 Mbit/s
10 Gbit/s
10 Gbit/s
SCALANCE
XR-500
OSPF
Operator Station
SCALANCE
1000 Mbit/s XR-500
PC
SCALANCE
XR-500
PC
Ring redundancy
Operator Station
PC
10 Gbit/s
Industrial Ethernet
Control Level
SCALANCE XR-500
SCALANCE XR-500
1000 Mbit/s
Engineering Station
SCALANCE
XM-400
ET 200SP
SCALANCE XR-300
SCALANCE
SCALANCE
1000 Mbit/s
X-300
X-300
1000 Mbit/s
SCALANCE
X-300
SIMATIC S7-1500
Use of SCALANCE XR-500 in redundant network topologies, e.g. with Rapid Spanning Tree Protocol (RSTP) and ring redundancy
Mobile website of SCALANCE X-500
34
SCALANCE X Industrial Ethernet switches
SCALANCE XR-300
G_IK10_XX_10298
SCALANCE
XM-400
SCALANCE
XR-300
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
Properties at a glance
■
Simple adaptation to the structure of a plant thanks to
the modularity offered by 4-port media modules
■
Reduction of the network installation costs due to savings in power cables and additional network components when Power-over-Ethernet is used
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
RJ45 sockets with retaining sleeve for additional strain
relief, designed for PROFINET-compliant IE FC RJ45 plug
High availability of the network thanks to
– Redundant power supply
– Integrated redundancy manager for constructing
Fast Ethernet and Gigabit Ethernet ring topologies
with high-speed media redundancy
– Easy device replacement by means of plug-in
C-PLUG/KEY-PLUG swap medium
– Very fast reconfiguration of the network in event
of a fault
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data transmission rate by means of autosensing and autonegotiation function
■
Remote diagnostics is performed by means of SNMP,
web browser and PROFINET IO diagnostics
■
KEY-PLUG swap medium for optional layer 3
functionality during operation
■
Integrated configuration and diagnostics in the
TIA Portal
■
Thanks to support for the Dual Stack Routing function,
both IPv4 and IPv6 addressing can be operated in one
network
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function
■
High flexibility thanks to variable mounting options of
the power supply unit, and choice between front or
rear cable outlet on the device (depending on the
device variant)
■
Multicast and broadcast limitation
■
Support of VLAN permits integration into enterprise
security policies
■
IGMP Snooping and IGMP Query support Multicast
filtering and limiting
■
SCALANCE X Industrial Ethernet switches
35
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
Media modules for modular SCALANCE X-500 managed switches
Different 4-port media modules enable flexible equipping of
the SCALANCE X-500 switches. Electrical versions with RJ45
ports are available as well as optical versions with BFOC and
SC ports for the use of multimode and singlemode fiber-optic
cables.
• Using a 4-port SFP media module, the optional use of fiberoptic SFP plug-in transceivers (Small Form-Factor Pluggable) with LC connection technology is possible
• SFP+ and SFP plug-in transceivers for flexible equipping of
the four integral SFP+ slots in SCALANCE X-500
Their versatility (electrical/optical, multimode/singlemode,
Fast Ethernet, Gigabit Ethernet) with media modules which
can be differently equipped allows significantly reduced stocking of device variants.
MM992-4 CuC with RJ45 ports
MM991-4 with BFOC ports
and retaining sleeve
MM992-4 with SC ports
MM991-4 with SFP ports
2SWLFDO
SRUWPHGLDPRGXOHV
DUHLQVHUWHGLQWRWKH
GHYLFH
6)3PHGLDPRGXOHV
IRXU6)3VORWVDUH
LQVHUWHGLQWRWKHGHYLFH
2SWLFDO6)3
SOXJJDEOHWUDQVFHLYHUV
RQHSRUWDUHLQVHUWHG
LQWRWKH6)3PHGLDPRGXOH
(OHFWULFDOSRUW
PHGLDPRGXOHVDUH
LQVHUWHGLQWRWKHGHYLFH
4-port media modules plugged into media module slot and SFP/SFP+ plug-in transceivers in SFP+ slots
36
SCALANCE X Industrial Ethernet switches
G_IK10_XX_10325
2SWLFDO6)3
SOXJJDEOHWUDQVFHL
YHUVRQHSRUWDUH
LQVHUWHGLQWR
WKHGHYLFH
© Siemens AG 2013
SCALANCE X Industrial Ethernet switches
SCALANCE X accessories
PLUGs for network components
With the KEY-PLUG and C-PLUG swap media, it is possible to
enable special additional functions for various network components. KEY-PLUG contains all the functionalities of C-PLUG.
There are PLUGs for SCALANCE X, SCALANCE W, SCALANCE S,
communication processors and also network transitions.
• C-PLUG allows, for example, fast and simple device replacement in the case of a fault and is used for automatic backup
of configuration data
• The KEY-PLUG for IWLAN activates so-called iFeatures
with SCALANCE W network components, e.g. wireless realtime communication, fast roaming, and extended range
• The KEY-PLUGs for SCALANCE XM-400 and X-500 enable
the layer 3 functionality on all layer 2 devices
SCALANCE W
(IEEE 802.11n)
SCALANCE X
C-PLUG
SCALANCE W
(IEEE 802.11agbn)
SCALANCE X
SCALANCE S
SCALANCE S-600*
SIMATIC S7
Network transitions
CP 443-1 Advanced*
IWLAN/PB Link PN IO
SCALANCE W74x
SCALANCE X-500
SCALANCE W74x
SCALANCE X-200
SCALANCE W78x
SCALANCE XM-400
SCALANCE W78x
SCALANCE X-300*
CP 343-1 Advanced*
IE/PB Link PN IO
SCALANCE XM-400*/
X-400*
CP 343-1 ERPC*
IE/AS-i LINK PN IO
SCALANCE X-500*
DP/AS-i LINK
Advanced
G_IK10_XX_30310
KEY-PLUG
* included in scope of delivery
Advantages
■
Functional expansions of network components
without device replacement
■
Minimization of downtimes when faults occur
■
No specialized personnel required for device
replacement
SCALANCE X Industrial Ethernet switches
37
© Siemens AG 2013
Industrial Ethernet Switching
Communications processors with switch functionality
Generally, communications processors are used to connect
SIMATIC S7 or PCs to PROFIBUS or Industrial Ethernet. The CPs
perform communication tasks for the controllers and take up
few of their resources. Some communications processors also
have an integral switch, which offers additional benefits.
Industrial Ethernet
SIMATIC
S7-300
with CP 343-1
Advanced
Network separation
In this case, suitable protective measures (including IT security such as network segmentation) should be taken in order to
ensure safe operation of the plant. For more information on
the topic of industrial security, go to
www.siemens.com/industrialsecurity.
SCALANCE
X208
PC/IPC
with
CP 1616
as IO
Device
SCALANCE
XF208
ET 200S
ET 200S
PROFINET/Industrial Ethernet
if IRT is required, switches with IRT functionalities
(e.g. SCALANCE X204IRT) must be used
G_IK10_XX_10249
• Establishment of small networks without additional switch
• Connection of machines or process cells to higher-level
networks
• Network separation by means of layer 3 functionality
(IP routing) and Security Integrated (firewall, VPN) with
CP 343-1 Advanced, CP 443-1 Advanced, and CM 1542-1
with PROFINET
• Functions for network diagnostics
Connection to higher-level network
wˆ•Œ“Gwj
zpth{pjGz^T[WW
ž›GjwG[[ZTXG
h‹ˆ•ŠŒ‹
l{GYWWz
wyvmpul{
mŒ“‹Gwn
p•‹œš›™ˆ“Gl›Œ™•Œ›
Independent local networks, e.g. within a machine or cell
38
Industrial Ethernet Switching
n†prXW††XWW^W
zpth{pjGz^TZWW
ž›GjwGZ[ZTX
© Siemens AG 2013
Industrial Ethernet Switching
Communications processors with switch functionality
The SIMATIC NET communications processors can be used for
applications in factory and process automation. With their
protocol pre-processing, they offer constant data throughput,
enable consistently fast response times, and prevent fluctuations in communication performance.
The communication processors are all designed for use in
tough industrial environments with a wide range of temperatures. They are certified for marine use, enabling them to be
used in ships or offshore installations.
The following communications processors are available with
integral switch:
CPs for SIMATIC S7
CP 343-1 Lean, CP 343-1, CP 343-1 Advanced,
CP 443-1, CP 443-1 Advanced, CM 1542-1
Properties at a glance
CPs for PCs
CP 1604, CP 1616, CP 1623, CP 1628
Properties at a glance
■
Connection to SIMATIC S7 via backplane bus
■
Connection in the PC via PCI, PCIe or PC/104-Plus
interface
■
Diagnostics on the device by means of LEDs
(link status, bus fault, data communication)
■
Redundant voltage supply via PCIe interface and
external power supply 12 to 24 V DC for operating
the switch when the PC is turned off (CP 1623 and
CP 1628 only)
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Remote diagnostics is performed by means of
SNMP and PROFINET IO diagnostics
■
Support of PROFINET IRT for time-critical applications
also with isochronous closed-loop control in the
motion control area (except CP 1623)
■
Integrated configuration and diagnostics in STEP 7
■
Integration of the CPs into existing network management infrastructure by means of SNMP access
■
Support for Gigabit Ethernet (CP 1623 only)
■
Security Integrated (Firewall, VPN) with CP 343-1
Advanced, CP 443-1 Advanced, and CP 1628
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Remote diagnostics is performed by means of SNMP,
Web browser and PROFINET IO diagnostics
■
Support of PROFINET IRT for time-critical applications,
also with isochronous closed-loop control in the motion
control area (except CP 343-1 Lean/CP 343-1)
■
Integrated configuration and diagnostics in STEP 7
■
Integration of the CPs into existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function (Advanced CPs only)
■
IP routing between gigabit and PROFINET interface
(Advanced CPs only)
Industrial Ethernet Switching
39
© Siemens AG 2013
Industrial Ethernet Switching
Port configuration for SCALANCE X Industrial Ethernet switches and
components with switch functionality
Gigabit Ethernet
10 / 100 /
1000 Mbit/s
1 Gbit/s
Fast Ethernet
10 Gbit/s 10 /
100 Mbit/s
Managed Switches
100 Mbit/s
Electrical
Optical
Type of module
Twisted Pair
Multimode
Singlemode
XR552-12M 1)
48x RJ45
48x SC/LC
48x SC/LC
4x LC
XR528-6M 1)
24x RJ45
24x SC/LC
24x SC/LC
4x LC
XM416-4C 1) 2)
24x RJ45 3)
20x LC 3)
20x LC 3)
20x LC 3)
XM408-8C 1) 2)
24x RJ45 3)
24x LC 3)
24x LC 3)
24x LC 3)
1) 2)
3)
X302-7EEC 1)
24x RJ45
4x SC/16xLC
4x SC/16xLC
Optical
Twisted Pair
POF/PCF
3)
4x BFOC /16LC
2x RJ45
4x RJ45
X306-1LD FE
6x RJ45
2x RJ45
X307-3
20x LC 3)
SCALANCE
X-400
24x LC 3)
3)
4x BFOC /16LC
3)
2x SC
1x SC
5x RJ45
3x SC
X307-3LD
2x LC
7x RJ45
3x SC
2x SC
7x RJ45
X308-2
1x RJ45
7x RJ45
X308-2LD
1x RJ45
2x SC
X308-2LH
1x RJ45
2x SC
7x RJ45
X308-2LH+
1x RJ45
2x SC
7x RJ45
X308-2M 1)
8x RJ45
4x SC/LC
4x SC/LC
X308-2M TS 1)
8x RJ45
4x SC/LC
4x SC/LC
X308-2M PoE 1)
8x RJ45
4x SC/LC
4x SC/LC
X310
3x RJ45
7x RJ45
SCALANCE
X-300
7x RJ45
X310FE
10x RJ45
X320-1FE
20x RJ45
X320-3LD FE
XR324-12M 1)/
XR324-12M TS 1) 24x RJ45
XR324-4M EEC/
XR324-4M PoE 1)/ 24x RJ45
XR324-4M PoE TS 1)
XF204/X204IRT/
XF204IRT
X202-2IRT
20x RJ45
24x SC/LC
1x SC
1x SC
24x SC/LC
1x SC
24x SC/LC/BFOC 24x SC/LC/BFOC
10x RJ45
8x SC/LC
8x SC/LC
8x SC/LC/BFOC
2x BFOC
2x RJ45
2x SCRJ
X201-3P IRT
1x RJ45
1x RJ45
(Push Pull)
3x SCRJ
3x SCRJ
(Push Pull)
4x SCRJ
X200-4P IRT
4x RJ45
(Push Pull)
2x RJ45
(Push Pull)
24x RJ45
X204IRT PRO
X202-2P IRT PRO
X224
8x SC/LC/BFOC
4x RJ45
2x RJ45
X202-2P IRT
X201-3P IRT PRO
2x SCRJ
(Push Pull)
SCALANCE
X-200
X216
16x RJ45
X212-2
12x RJ45
X212-2LD
12x RJ45
X208/XF208
8x RJ45
X208PRO
8x M12
X206-1/XF206-1
6x RJ45
X206-1LD
6x RJ45
X204-2/XF204-2
4x RJ45
2x BFOC
X204-2TS
4x RJ45
2x BFOC
X204-2LD
X204RNA /
204RNA EEC 2)
4x RJ45
2x BFOC
2x BFOC
1x BFOC
1x BFOC
2x BFOC
4x RJ45
1) The specified number of ports pertains to the max. possible number of devices per
interface type. The combined number of ports per device is provided in the specific
technical data.
SCALANCE X managed Industrial Ethernet switches
40
Singlemode
7x LC
X304-2FE
X307-2EEC 1)
Multimode
48x SC/LC/BFOC 48x SC/LC/BFOC SCALANCE
24x SC/LC/BFOC 24x SC/LC/BFOC X-500
Industrial Ethernet Switching
2) Comboports can be used as an alternative
3) Maximum configuration with port extender
4) Multimode or Singlemode
G_IK10_XX_10288
XM408-4C
3)
Electrical
© Siemens AG 2013
Industrial Ethernet Switching
Port configuration for SCALANCE X Industrial Ethernet switches and
components with switch functionality
Fast Etherne
10 / 100 /
1000 Mbit/s
1000 Mbit/s
10 / 100 Mbit/s
100 Mbit/s
Electrical
Optical
Electrical
Optical
Twisted Pair
Multimode
Twisted Pair
POF/PCF
Singlemode
Multimode
X124
24x RJ45
X116
16x RJ45
X112-2
12x RJ45
X108/X108PoE
8x RJ45
X106-1
6x RJ45
1x BFOC
X104-2
4x RJ45
2x BFOC
XB008G
8x RJ45
5x RJ45
4x RJ45
4x RJ45
4x RJ45
SCALANCE
X-000
1x SC
XB004-1LD
XB004-1G
SCALANCE
X-100
5x RJ45
XB005
XB004-1LDG
2x BFOC
8x RJ45
XB008
XB005G
Singlemode
1x SC
1x SC
XB004-1
4x RJ45
X005/X005 TS/
XB005
5x RJ45
1)
XC100-4OBR
1)
G_IK10_XX_10289
Type of module
nmanaged Switches
Gigabit Ethernet
1x SC
1)
5x RJ45
1)
1) available as multimode or single mode variants with 4x SC interfaces
SCALANCE X unmanaged Industrial Ethernet switches
Fast Ethernet
10 / 100 /
1000 Mbit/s
1000 Mbit/s
10 / 100 Mbit/s
100 Mbit/s
Electrical
Optical
Electrical
Optical
Twisted Pair
Multimode
Twisted Pair
POF/PCF
Singlemode
LOGO! CSM 12/24
4x RJ45
LOGO! CSM 230
4x RJ45
CSM 1277
4x RJ45
CSM 377
4x RJ45
CP 343-1 Lean
2x RJ45
CP 343-1
2x RJ45
CP 343-1 Advanced
1x RJ45
CP 443-1
CP 443-1 Advanced
4x RJ45
CM 1542-1
2x RJ45
CP 1604
4x RJ45
CP 1616
4x RJ45
CP 1623
Singlemode
Module for
Logic module LOGO!
Module for
SIMATIC S7-1200
Module/CPs for
SIMATIC S7-300
2x RJ45
2x RJ45
1x RJ45
Multimode
2x RJ45
CPs for
SIMATIC S7-400
CPs for
PG/PC
G_IK10_XX_10274
Type of module
Gigabit Ethernet
Industrial Ethernet communications processors with switch functionality
Industrial Ethernet Switching
41
© Siemens AG 2013
Industrial Ethernet Switching
Network management
The network management products SINEMA Server (SIMATIC
Network Manager) and SNMP OPC Server support in monitoring and diagnosing wireless and wired networks in industrial
environments.
Network diagnostics with SINEMA Server
With a suitable network management system such as the
SINEMA Server from Siemens that is specially designed for industrial applications, however, such problems can be detected
at an early stage and appropriate measures taken in good time.
Even a single failure in the network during operation can result
in a rush of alarms from various network nodes which are connected together. The combination of topology know-how with
the diagnostics values of individual network nodes is decisive in
order to rapidly identify the location and eliminate the cause of
a network fault. A complete physical map of the network permits analysis of the possible effects of cable or device faults.
This is helpful when planning high-availability applications.
Sinema Server also provides maximum openness for Ethernetbased devices from other vendors.
These can be detected and diagnosed simply and conveniently
via SNMP.
The most important functions
Intuitive operation
SINEMA Server is network management for industry. Attention was paid here to the most important functions for the industrial environment, and these are implemented with a clear
interface for intuitive operation. Users can monitor their networks in the shortest time possible. Costly and time-intensive
IT training is not necessary.
Automatic device detection and generation of the
network topology
With the help of DCP and SNMP, SINEMA Server automatically
detects PROFINET and Ethernet devices in the network and
represents them graphically in a Web browser. This means that
the maintenance personnel in process and production plants
can monitor the current status of the devices and their connections (topology) at all times without time-consuming configuration.
User-specific topology display
As well as the automatically generated display of the topology, SINEMA Server also gives users the option of representing
the network nodes in any arrangement. These user-specific topologies can also be supplemented with background images
(e.g. building or plant diagrams). In the case of faults, this
means that the relevant network components can be found
and, if required, replaced or repaired more quickly.
Event-triggered alarms
For gap-free and instantaneous monitoring of the network,
network messages must be detected immediately and the
user must be informed. For this purpose, SINEMA Server offers
event handling with which all network event messages are acquired and processed. Users of SINEMA Server are thus supplied with all the important event information concerning the
network.
User-defined display
Different personnel with different roles (e.g. administrators,
maintenance personnel, etc.) can use SINEMA Server in their
daily work. The administrator defines different groups to
whom the appropriate rights and views are assigned. Up to 10
people with different tasks can work simultaneously with
SINEMA Server.
42
Industrial Ethernet Switching
© Siemens AG 2013
Industrial Ethernet Switching
Comprehensible network reports
Network diagnostics encompasses not only the current status
of the network, but also the analysis of historical values.
SINEMA Server saves to a database all values read out from the
network components. Time-based filtering and evaluation
with comprehensible reports can then take place. In this way,
all past events can also be analyzed and used to prevent future
failures.
Adaptable quantity structure with up to 50,000 network nodes
Different SINEMA Server licenses can be selected depending
on the size of the network. SINEMA Server monitors large networks with up to 500 nodes with one installation. With extremely large production networks, SINEMA Server is able to
display up to 100 further SINEMA Servers. In this way, individual production cells can be monitored centrally from a single
SINEMA Server station, for example
The most important applications at a glance:
Diagnostics via Web browser
Access to network diagnostics should not be locally restricted,
particularly in the case of large networks. That's why
SINEMA Server has been developed on the basis of a server architecture. This enables access to the network management
software via commonly used Web browsers. In this way, the
network to be checked can also be diagnosed from any location. This enables the network diagnostics tasks of several
plant sections to be bundled in one control room.
Integration into HMI/SCADA systems
To have everything in view, network diagnostics should be integrated in the HMI/SCADA plant solution. SINEMA Server offers full integration of the topology via the Web browser. In addition, all parameters, e.g. warnings and faults, can be transferred via the integrated OPC interface. This enables users to
integrate network diagnostics into HMI/SCADA systems without a high engineering outlay.
Adaptable device profiles
Users have the option of optimizing the device display by
means of the profile concept, particularly for non-Siemens
network components represented by SINEMA Server via standard SNMP information. Scanning of device-specific data via
SNMP can also be set via the profile. This means that an industrial network comprising devices from different manufacturers can be optimally monitored with SINEMA Server.
■
Automatic documentation of networks
■
Application-specific structuring and visualization
of a network
■
Reporting of changes and faults in the network
■
Analysis of changes and faults in the network
■
Integration of network diagnostics into HMI/SCADA
■
Adaptation of monitoring functionality to devices
and users
Sinema Server provides maximum openness for Ethernetbased devices from other vendors. These can be detected
and diagnosed simply and conveniently via SNMP.
SNMP OPC Server
Through the SNMP OPC server the diagnostic and configuration data of SNMP-capable devices, such as network components, can be displayed in HMI systems such as WinCC or in
the SIMATIC Maintenance Station. Using this software, standard maintenance data can be read and simple plant network
problems, such as failure of a cable, can be quickly and easily
detected.
Configuration of the SNMP diagnostics is integrated in STEP 7.
Ethernet devices can be read from a STEP 7 project or, using
the autodiscovery function, directly from the live network.
The user can easily add all devices detected there to the device
list for monitoring on the OPC Server.
Industrial Ethernet Switching
43
© Siemens AG 2013
Industrial Ethernet Switching
Diagnostics and network management
SCALANCE X-000
CSM
CP for S7-300
CP for S7-400
CM for S7-1500
CP 1604
CP 1616
CP 1623
•
•
•
•
•
•
1)
1)
1)
1)
1)
•
•
•
•
•
•
•
•
•
•
•
•
1) Port diagnostics possible via integral web server
Industrial Ethernet switches and components with switch functionality: Network structure diagnostic options and logs
44
Industrial Ethernet Switching
Layer 3 (IP-Routing)
•
•
•
•
•
Multicast / broadcast limiting
•
•
•
•
•
RSTP
•
•
•
•
IGMP-Snooping/-Querier
•
•
•
•
VLAN
•
•
•
•
•
•
1)
G_IK10_XX_10138
SCALANCE X-100
•
•
•
•
•
Diagnostics via SNMP
SCALANCE X-200
•
•
•
•
•
Web-based management
SCALANCE X-300
•
•
•
•
•
•
•
•
•
•
•
•
•
PROFINET diagnostics
SCALANCE X-400
Message screen
SCALANCE X-500
Fault signaling contact
Module type
LED
Diagnostics options for components with switching functionality
© Siemens AG 2013
Industrial Ethernet
Cabling with FastConnect
FastConnect for electrical cables
The rapid connection system FastConnect (FC) for Industrial
Ethernet enables industry-compatible network structures to
be set up within a short time using optimally matched components. It comprises:
• Industrial Ethernet FastConnect cables
specially designed for fast assembly
(UL and CAT5e/Cat6 certified) e.g. FC TP Standard,
FC TP Flexible, FC TP Trailing and FC TP Marine Cable
• User-friendly stripping technology with the
FastConnect stripping tool, enabling the outer sheath
and braided shield to be removed accurately in a single
operation
• Cables prepared in this way are connected to the
FastConnect products using the insulation displacement
technique.
• IE FC RJ45 Plug and IE FC M12 Plug PRO
are insensitive to interference due to the rugged metal enclosure, and are the ideal solution for installing RJ45 or M12
connectors at the field level (PROFINET-compliant)
• Industrial Ethernet FC Modular Outlets
are connection sockets for structured cabling with Fast and
Gigabit Ethernet
Advantages of the FastConnect system for
electrical cables
■
Comprehensive product range for flexible wiring in
industry in accordance with the innovative PROFINET
Industrial Ethernet standard
■
Minimized time taken to connect data terminals thanks
to safe stripping of the outer sheath and braided
shield in one step
■
Simple connection system
■
– Insulation-displacement contacts for 4-core (Cat5)
and 8-core (Cat6) Industrial Ethernet FC twistedpair installation cables
– SC or BFOC connection system for FC glass
fiber-optic cable
Easy assembly for both TP cable types with the
preadjusted FC stripping tool or FC FO termination kit
for FC glass FOC
■
Reliable shield contact and strain relief thanks to
screw-on cover
■
Good EMC shielding and conduction (metal casing);
mistakes are prevented thanks to color coding and
the transparent terminal cover
■
RJ45 cabling technology is used as the existing
standard
Assembly with FastConnect for RJ45 and M12 connectors
Industrial Ethernet
45
© Siemens AG 2013
Industrial Ethernet
Cabling with FastConnect
FastConnect for glass fiber-optic cables
For the FastConnect FOC system, fiber-optic cables with glass
core (62.5/200/230) are offered. They are suitable for easy assembly in the field:
• FC FO Standard Cable GP;
62.5/200/230 with PVC casing for permanent indoor
installation
• FC FO trailing cable;
for use in tow chains and moving applications
• FastConnect glass fiber-optic cables are assembled on-site
using the FC FO termination kit. The termination kit permits the stripping and the "cleaving" of the fiber in the
assembled connector.
• FastConnect SC and FastConnect BFOC connectors are
available for the assembly of FC glass fiber-optic cables
Assembly with FastConnect for glass fiber-optic cables
46
Industrial Ethernet
Advantages of the FastConnect system for
glass fiber-optic cables
■
Simple installation of the unassembled cable
■
Flexible connector assembly on site (SC/BFOC
connectors) without skilled personnel
■
Prevention of faults by simply checking the assembled
connectors on site using a microscope
■
Simple repair of FC glass fiber-optic cables in the field
© Siemens AG 2013
SCALANCE X Industrial Ethernet switching
Advantages at a glance
■
Rugged industry-compatible design
■
The right construction type for any application
■
Protection of investments: Existing networks can be
expanded with new products
■
Integration into existing concepts for network
security thanks to integral security functions
■
Broad-based use in small or large networks even
outside the control cabinet
■
Avoidance of additional training and familiarization
costs thanks to the use of standardized
Ethernet technology
■
High network and machine availability
■
One network for strict real time and standard TCP/IP,
saving on duplicated infrastructure
■
Reduction of downtimes due to saving of engineering
and configuration data
■
Quick, easy and reliable cabling and the option of
self-assembly
■
On-site or remote parameterization and diagnostics
■
Support from SIMATIC Engineering Tools
■
Embedding in the SIMATIC fault message concept
(system fault signaling, SFM) and PROFINET
■
Networking without the need for additional
gateways
SCALANCE X Industrial Ethernet switching
47
© Siemens AG 2013
,QGXVWULDO6HFXULW\
*HWPRUHLQIRUPDWLRQ
6,0$7,&1(7
KWWSZZZVLHPHQVFRPDXWRPDWLRQVLPDWLFQHW
6&$/$1&(;,QGXVWULDO(WKHUQHWVZLWFKHV
ZZZVLHPHQVFRPVZLWFKHV
58**('&20,QGXVWULDO(WKHUQHWVZLWFKHV
ZZZVLHPHQVFRPUXJJHGFRP
,QIRPDWHULDOIRUGRZQORDGLQJ
KWWSZZZVLHPHQVFRPDXWRPDWLRQLQIRFHQWHU
6HUYLFH6XSSRUW
KWWSZZZVLHPHQVFRPDXWRPDWLRQVHUYLFHVXSSRUW
6,0$7,&1(7FRQWDFWV
KWWSZZZVLHPHQVFRPDXWRPDWLRQSDUWQHU
,QGXVWU\0DOOIRUHOHFWURQLFRUGHULQJ
ZZZVLHPHQVFRPLQGXVWU\PDOO
6LHPHQV$*
,QGXVWU\6HFWRU
6HQVRUVDQG&RPPXQLFDWLRQ
3RVWIDFK
1h51%(5*
*(50$1<
ZZZVLHPHQVFRPDXWRPDWLRQ
6XEMHFWWRFKDQJHZLWKRXWSULRUQRWLFH
$UWLFOH1R=%$1%$
0356&'LVSR
%5527(Q
3ULQWHGLQ*HUPDQ\
‹6LHPHQV$*
6LHPHQVSURYLGHVDXWRPDWLRQDQGGULYHSURGXFWV
ZLWKLQGXVWULDOVHFXULW\IXQFWLRQVWKDWVXSSRUWWKH
VHFXUHRSHUDWLRQRISODQWVRUPDFKLQHV7KH\DUH
DQLPSRUWDQWFRPSRQHQWLQDKROLVWLFLQGXVWULDO
VHFXULW\FRQFHSW:LWKWKLVLQPLQGRXUSURGXFWV
XQGHUJRFRQWLQXRXVGHYHORSPHQW:HWKHUHIRUH
UHFRPPHQGWKDW\RXNHHS\RXUVHOILQIRUPHGZLWK
UHVSHFWWRRXUSURGXFWXSGDWHV3OHDVHILQGIXUWKHU
LQIRUPDWLRQDQGQHZVOHWWHUVRQWKLVVXEMHFWDW
KWWSVXSSRUWDXWRPDWLRQVLHPHQVFRP
7RHQVXUHWKHVHFXUHRSHUDWLRQRIDSODQWRU
PDFKLQHLWLVDOVRQHFHVVDU\WRWDNHVXLWDEOH
SUHYHQWLYHDFWLRQHJFHOOSURWHFWLRQFRQFHSW
DQGWRLQWHJUDWHWKHDXWRPDWLRQDQGGULYH
FRPSRQHQWVLQWRDVWDWHRIWKHDUWKROLVWLF
LQGXVWULDOVHFXULW\FRQFHSWIRUWKHHQWLUHSODQWRU
PDFKLQH$Q\WKLUGSDUW\SURGXFWVWKDWPD\EHLQ
XVHPXVWDOVREHWDNHQLQWRDFFRXQW3OHDVHILQG
IXUWKHULQIRUPDWLRQDW
KWWSZZZVLHPHQVFRPLQGXVWULDOVHFXULW\
7KHLQIRUPDWLRQSURYLGHGLQWKLVEURFKXUHFRQWDLQVGHVFULSWLRQV
RUFKDUDFWHULVWLFVRISHUIRUPDQFHZKLFKLQFDVHRIDFWXDOXVHGR
QRWDOZD\VDSSO\DVGHVFULEHGRUZKLFKPD\FKDQJHDVDUHVXOW
RIIXUWKHUGHYHORSPHQWRIWKHSURGXFWV$QREOLJDWLRQWRSURYLGH
WKHUHVSHFWLYHFKDUDFWHULVWLFVVKDOORQO\H[LVWLIH[SUHVVO\DJUHHG
LQWKHWHUPVRIFRQWUDFW$YDLODELOLW\DQGWHFKQLFDOVSHFLILFDWLRQV
DUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH
$OOSURGXFWGHVLJQDWLRQVPD\EHWUDGHPDUNVRUSURGXFWQDPHV
RI6LHPHQV$*RUVXSSOLHUFRPSDQLHVZKRVHXVHE\WKLUG
SDUWLHVIRUWKHLURZQSXUSRVHVFRXOGYLRODWHWKHULJKWVRI
WKHRZQHUV
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement