invitation for supply of various lab equipments

invitation for supply of various lab equipments
No.: 1743 /Purchase Office/Biotech/ Inverted microscope with camera etc./2014
Dated: 14/02/2014
Telephone : 91-532-227+1122, 1123
eksrhyky usg: jk"Vªh; izkS|ksfxdh laLFkku bykgkckn]
bykgkckn&211004 ¼Hkkjr½
Fax
: 0532-2545341, 2545822
GRAM
Website
Email
: MNNIT
: http:\\www.mnnit.ac.in
: spo@mnnit.ac.in,
fip@mnnit.ac.in
Motilal Nehru National Institute of Technology Allahabad
Allahabad-211004 (India)
An Institute of National Importance as Declared by NIT Act, GOI, 2007
INVITATION FOR SUPPLY OF VARIOUS LAB EQUIPMENTS
(For Contracts value estimated to cost less than Rs.25 lakhs)
1
Closing Date/Time for submission of
Quotations
11/03/2014; 15:30 Hrs.
2
Opening Date/Time of Quotations
11/03/2014; 16:00 Hrs.
3
Quotations to be submitted at
4
Place of opening of quotations
5
Tender Fee
6
Earnest Money Deposit (EMD)
The Office of Faculty-In-charge (Purchase)
M.N.N.I.T. Allahabad, Allahabad-211 004 (U.P.)
The Office of Faculty-In-charge (Purchase)
M.N.N.I.T. Allahabad, Allahabad-211 004 (U.P.)
Rs. 200.00 (Non-refundable), in form of a Demand Draft drawn
in favor of DIRECTOR, MNNIT Allahabad.
Rs. 45,000/- (Rs. Forty five thousand only), in form of
FDR/Bank guarantee, from any of the Commercial Banks,
drawn in favour of "Director, MNNIT Allahabad” payable at
Allahabad, and valid for a period of 45 days beyond the final
bid validity period.
To,
M/s BioAnalytical Technologies (India) Pvt. Ltd,
Plot No EL-72, Electronic Zone, TTC Industrial Area, Mahape Navi, Mumbai 400705
Dear Sir
You are invited to submit your most competitive quotation for the following items. The quotation should be sent directly to the
undersigned under Sealed Cover marked “Quotation Reference No., Date”, and “The Due Date:
Sl.
No.
Description of item with Specification
Quantity
(No.)
DIFFERENT LAB EQUIPMENTS
1
As per Annexure-B
Full Details of items and Specification as per ANNEXURE „B‟
The sealed tenders must be submitted in the Office of the Faculty In-charge (Purchase), on or before due date & time as mentioned
above in the office of the undersigned, in the presence of bidder‟s authorized representatives, who choose to attend and shall sign a
register evidencing their attendance.
The tender/quotations NOT submitted in the prescribed format or Incomplete in any respect will be outrightly rejected.
Faculty in-Charge, Purchase
MNNIT Allahabad
[1/8]
Signature (in ink, with date) & Seal of Bidder/Tenderer
INSTRUCTIONS/GUIDELINES TO BIDDERS (ITB)
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
4.
5.
6.
10.
Only bidders, who fulfill the ELIGIBILITY CRITERIA, as given in this tender document, should apply.
The bidders should enclose relevant documents wherever necessary to substantiate their eligibility.
The bidder should enclose the cliental list with contact address along with Phone/Fax for reference, for the quoted item.
The Bidders must submit their Quotation with EMD in the form of Demand Draft/ Bank Guarantee/ Short term Deposit of the
cost of Printing Works/items in favor of “The Director, MNNIT, Allahabad” payable at Allahabad. Quotation without EMD will
be summarily rejected. EMD„s of all Bidders will be returned back after the purchase order /contract agreement is issued to
successful bidder.
Successful Bidders must have to submit the performance security @ 10% of the purchase order or contract value and it will be
retained up to the warranty period.
MNNIT ALLAHABAD reserves the right to reject, accept any or whole or part of any of the tender without assigning any reason
thereof and no claim will be heard. In case of dispute, the decision of The Director, MNNIT Allahabad will be final and binding.
If the successful bidder is not able to complete the supply & Installation work within the delivery date specified in the purchase
order, the purchase order will be automatically treated as cancelled after expiry of delivery date period. The vendor will have to
submit an undertaking in this regard that this condition is acceptable to him. In case of extra ordinary circumstances the
vendors must send a request for extension of validity of purchase orders, with proper justification prior to the expiry of validity
date for consideration.
The quotation must be accompanied by leaflets/operation manuals/books etc.
The Bidder is expected to examine all instructions, forms, terms and specifications in the Bid Documents. Failure to furnish all
information required as per the Bid Documents or submission of bids which are not substantially responsive to the Bid
Documents in every respect may result in rejection of the bid.
Bidders who had supplied the Government departments, PSUs/NITs/IITs/IIITs and reputed Institutions and Organizations should
only apply.
The bidder should enclose the cliental list with contact address along with Phone/Fax for reference, for the quoted item.
Please quote the prices F.O.R. Motilal Nehru National Institute of Technology Allahabad (MNNIT ALLAHABAD),
Allahabad ONLY.
[NOTE: Custom/Excise Duty Exemption Certificate will be provided by MNNIT Allahabad after receiving your request
letter for the same.
 MNNIT Allahabad avails Custom Duty Exemption in terms of Government Notification N. 51/96-Customs dated 23
July, 1996, and Central Excise Duty Exemption in terms of Government Notification N. 10/97-Central Excise dated 01
March, 1997, as amended from time to time.
The bidder should enclose relevant documents wherever necessary to substantiate his eligibility.
The Institute is eligible for and can provide necessary documentation for Custom/Excise and Octroi exemption on demand, if
permitted under rule.
In case of sophisticated items, an on-site training needs to be provided with no extra cost.
Wherever applicable the vendors must quote the branded /desired items.
GENERAL TERMS & CONDITION (GCC)
1. Eligibility Criteria:
i. Firm/bidders blacklisted at any stage or by any NITs/IITs/IIITs/ Central Universities/ IISERs/CSIR/ labs or Central/State
Government body/PSUs etc. need not to apply.
ii. The bidder should be an Indian registered company engaged in respective area of works with minimum experience of 05
(FIVE) years. The bidder should have sufficient Infrastructure, technical expertise and financial strength to undertake the
contract.
iii. Minimum AVERAGE ANNUAL TURNOVER of Rs. 50 lakh in the last 3 financial years. (Balance sheet/CA certificate to
be enclosed, duly supported by the income tax return for financial years 2010-11, 2011-12, 2012-13).
iv. The bidder should have experience of similar Work experience with at least 10 academic organization of higher education,
in last 05 years. Out of which at least 05 should be NITs/IITs /IISERs/IIITs/IIMs and other Top ranking management
schools. The nature of completed work should be supply & satisfactory installation in various Government
Institutes/Firms/PSUs. [NOTE: The documentary proof of Purchase orders as well as payments thereof in respect of
works mentioned in bid MUST be submitted along with the bid.]
v. The Bidder/Tenderer should provide the following mandatory information:
a. Bidder/Tenderer must provide the information on the similar works completed successfully & satisfactory in last 3
years. Bidder/Tenderer must submit satisfactory documentary proof from end-users.
b. List of Organizations/Customers dealt by them.
c. Last Three year‟s copies of Income Tax Return Form and PAN number, as per government norms.
d. Copy of Registration of Firm with CST/GST Nos.
NOTE
i. The work executed in the own name of the bidder only will be considered for similar works, to meet the eligibility criteria.
JVs / Consortiums / MOUs shall not be considered.
ii. Tenderer should submit documents in support of minimum eligibility criteria along with the tender/bid. NO document in
support of minimum eligibility criteria will be accepted / entertained after opening of tender.
iii. Tenders/bids not meeting any of the above „Eligibility Criteria‟ shall be rejected.
2. Bid Price
(a) The total contract price shall be for the full quantity as described above. Corrections, if any, shall be made by crossing out,
initialing, dating and rewriting.
(b) All duties, taxes and other levies payable by the contractor under the contract shall be included in the total price.
(c) The quoted total contract price shall be fixed for the duration of the contract and shall not be subject to any adjustment.
(d) The prices should be quoted in Indian Rupees only for indigenous items.
(e) Each bidder shall submit only one quotation.
3. Validity of Quotation
The tender offer shall remain valid for 120 days from the date of opening of Technical bid (part-1) of this tender.
[2/8]
Signature (in ink, with date) & Seal of Bidder/Tenderer
4. Evaluation of Quotations
(a) Any items left blank, will be treated as incomplete bid and liable to be rejected.
(b) The purchaser will evaluate and compare the quotations determined to be substantially responsive, i.e., which
(i) are properly signed; and conform to the terms and conditions, and specifications.
(ii) will be with tender fees, and EMD required, if any.
(iii) Ink seal & sign on every page of tender document.
(iv) conform to the terms and conditions, and specifications.
(v) The Quotations would be evaluated separately for each item.
5. Award of Contract
The Purchaser will award the contract to the bidder whose quotation has been determined to be substantially responsive and
who has offered the lowest evaluated quotation price.
 Notwithstanding the above, the Purchaser reserves the right to accept or reject any quotations and to cancel the bidding
process and reject all quotations at any time prior to the award of contract.
 The bidder whose bid is accepted will be notified for the award of contract by the Purchaser prior. The terms of the accepted
offer, if falling under Govt. purchase rules, i.e., GFR-2005, shall be incorporated in the purchase order.
6. Formats and Signing of Bid
 Each & every pages of the submitted bid must carry the page numbers.
 The bidders are not allowed to make additional and alteration in the tender document, any additions and alteration in the
tender document, any additions and alterations shall be at bidder‟s risk. Conditional/modified tender are liable to be rejected.
 The tender/quotations NOT submitted in the prescribed format or Incomplete in any respect will be outrightly rejected.
 If the bid submitted without compliance sheet details of Printing Works the bid will be outrightly rejected.
 The bid shall be typed or written in indelible ink and shall be signed by the Bidder/Tenderer or a person or persons duly
authorized to bind the Bidder/Tenderer to the Contract. All pages of the bid, except for unamended printed literature, must
have Signature (in ink, with date) & Seal of Bidder/Tenderer.
 Any interlineations, erasure or overwriting shall be valid only if they are initiated by the persons or persons signing the bid.
 The Bidder shall furnish information as described in the Form of Bid on commissions or gratuities, if any, paid or to be paid to
agents relating to this Bid, and to contract execution if the Bidder is awarded the contract.
7. Payment condition: 100% Payment shall be made only after supply the items in good condition alongwith successful delivery
of items and satisfactory Installation report receive by competent authority. No advance payment will be made.
8. Normal Commercial warranty/guarantee shall be applicable to the supplied goods, (If warranty/Guarantee is not mention in
specifications of respective items).
SPECIFIC TECHNICAL CONDITIONS (STC)
1. The delivery of items securely and neatly packed should be made at MNNIT Allahabad.
2. All duties, Taxes and other levies payable by the bidder under the Contract shall be included in the Total Price.
3. Please quote the prices F.O.R. Motilal Nehru National Institute of Technology Allahabad (MNNIT ALLAHABAD),
Allahabad ONLY.
4. You are required to return the original tender document (all the pages as it is duly signed by you on every page for your record),
You may retain a copy of this tender enquiry for your record.
5. The bidder should be last 5 years in existence in India.
6. Incomplete or conditional bid will not be accepted.
7. The tenderer should have the capability to distribute finished work to the specified destinations by Road Transport /Courier
within the stipulated time schedule.
8. The Director MNNIT Allahabad reserves the right to accept or reject the tender at any stage without specifying any reason.
9. Compliance to above General terms & Conditions (GTC) and Specific Technical Conditions (STC), will be considered for overall
evaluation of the bid and non-compliance of any of the above technical terms & conditions/specifications may turn into rejection.
10. The Bidder/Tenderer must agree to all the technical terms and conditions of the offer, as mentioned in the technical proposal
and no such additional terms & conditions from Bidder/Tenderer will be accepted, at a later stage.
11. The Bidder/Tenderer is required to quote for supply the items as listed in specifications along with compliance of the terms and
conditions. Compliance to above Specific Technical Conditions, given as Annexure: B, will be considered for overall evaluation
of the bid and non-compliance of any of the above technical terms & conditions/specifications may turn into rejection.
SCOPE OF WORKS
The work includes the following:
(1.) The supply and installation of equipment with accessories.
(2.) Testing of equipment.
(3.) to provide, one copy each of following documentation (on CD/DVD and printed manual, both)
a) installation manual,
b) operating manual, and
c) Service Manual.
(4.) Repair/Refurnishing work to restore the damage caused due to cabling or any other work related to installation.
(5.) Any other work required for equipment making functional up to the satisfaction of MNNIT Allahabad.
Place:
Date:
[3/8]
Signature (in ink, with date) & Seal of Bidder/Tenderer
CHECK LIST
(ON THE LETTER HEAD OF THE BIDDER)
The Bid will be the compilation of following documents, along with required supporting documents. No document in support of
minimum eligibility criteria will be accepted / entertained after opening of tender.
Sl. No
Documents
1.
Cover letter by bidder (On the Letter Head of the Bidder)
2.
Tender Fee
3.
Earnest Money Deposit (EMD), if required
4.
Cliental List for quoted item
Annexure-A : Bid Proposal Sheet (On the Letter Head of the Bidder)
5.
Annexure-B : Technical Specification of Equipments
6.
Annexure-C : AFFIDAVIT REGARDING BLACKLISTING/ NON-BLACKLISTING FORM
7.
Annexure-D : Compliance of bidder with reference to the „Different Lab Equipments‟ (On the Letter Head of the
8.
Bidder)
Annexure-E : PRICE BID (On the Letter Head of the Bidder)
9.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = = = = = = = = = = = = = = = = = = =
ANNEXURE-A
BID PROPOSAL SHEET
(ON THE LETTER HEAD OF THE BIDDER)
To
Faculty In-charge (Purchase)
MNNIT Allahabad, Allahabad
Subject: Supply of “Different Lab Equipments” at MNNIT Allahabad, Allahabad.
Dear Sir,
We, the undersigned Tenderers, having read and examined in detail the specifications as specified in this document in respect
of Supply of Micro-reactor Test Rig at MNNIT Allahabad, Allahabad do hereby propose to supply the required products and
services.
Tender No.
Tender Fees submitted
YES / NO
(Please strike off whatever is not applicable)
Amount
Mode
Date of Issue
Name of Bank
Valid up to
Demand Draft
EMD submitted
YES / NO
(Please strike off whatever is not applicable)
Amount
Mode
Date of Issue
Name of Bank
Valid up to
Demand Draft
(i)
ADDITIONAL PURCHASE/WORK ORDER: We understand that the MNNIT Allahabad, Allahabad, in case of the
requirements may also place repeat purchase order/work order on the company. In such cases, we shall accept and
execute all the purchase/work order placed on us by MNNIT Allahabad, Allahabad.
(ii)
BID PRICING: We further declare that the prices stated in our proposal are in accordance with your Terms & Conditions
in the bidding document. We further understand that the quantities as specified in this Tender may increase or decrease
at the time of Award of Purchase Order as per the requirements of MNNIT Allahabad, Allahabad.
(iii) QUALIFYING DATA: We confirm that we satisfy the qualifying criteria and have attached the requisite documents as
documentary proofs. In case you require any further information/documentary proof in this regard during evaluation of our
bid, we agree to furnish the same in time to your satisfaction.
(iv) CONTRACT PERFORMANCE SECURITY: We hereby declare that in case the contract is awarded to us, we shall
submit the performance Guarantee Bond in the form of Bank Guarantee for the amount of 10% of the total order value.
(v)
PAYMENT TERMS: We hereby declare that in case the contract is awarded to us, we agree with payment terms
specified in the tender documents.
(vi) CERTIFICATE AND DECLARATION:
a) I/We certify that no addition/modification/alteration has been made in the Original Tender Document. If at any stage
addition /modification /alteration is noticed in the Original Document, I/We will abide by the terms and conditions
contained in the original tender document, failing which MNNIT Allahabad reserves the right to reject the tender
and/or cancel the contract
b) It has been certified that all information provided in tender form is true and correct to the best of my knowledge and
belief. We hereby declare that our proposal is made in good faith, without collusion or fraud. No forged /tampered
document(s) are produced with tender form for gaining unlawful advantage. We understand that MNNIT Allahabad is
authorized to make enquiry to establish the facts claimed and obtained confidential reports from clients.
c) In case it is established that any information provided by us is false / misleading or in the circumstances where it is
found that we have made any wrong claims. Further MNNIT Allahabad is also authorized to blacklist our
firm/company/agency and debar us in participating in any tender/bid in future.
d) I / We assure the Institute that neither I /We, nor any of my /our workers, will do any act which is improper / illegal
during the execution in case the tender is awarded to us.
e) I / We assure the Institute that I / We will NOT be outsourcing any work specified in the tender document, to any other
firm.
f) Neither I / We, nor anybody on my /our behalf will indulge in any corrupt activities /practices in my /our dealing with
the Institute.
g) Our Firm / Company / Agency is not been blacklisted or banned by any Govt. Department, PSU, University,
Autonomous Institute or any other Govt. Organization.
h) I/We certify that, I have understood all the terms & conditions (GCC and ITB etc.), as indicated in enquiry of the
tender document, and hereby accept all the same completely.
i) I/We, further certify that I/We, possess all the statutory /non-statutory registrations, permissions, approvals, etc., from
the Competent Authority for providing the requisite services,
j) We understand that you are not bound to accept the lowest or any bid you may receive.
k) I/We hereby declare that this tender on acceptance communicated by you shall constitute a valid and binding
contract between us.
l) I/We certify that the submitted quotation is duly paginated and contains from page no. 1 to ……………….
Date:
Signature and Seal of the Manufacturer/Bidder
[4/8]
Signature (in ink, with date) & Seal of Bidder/Tenderer
ANNEXURE-‘B’
TECHNICAL SPECIFICATIONS OF ‘DIFFERENT LAB EQUIPMENTS’
(ON THE LETTER HEAD OF THE BIDDER)
S.
No.
1
2.
3
4
5
6
Name of
equipment
Inverted
microscope with
camera (cell
culture grade)
Specifications
Quantity
1.
Inverted binocular phase contrast microscope with compact user
friendly design
2. Good quality 12bit digital camera assembly with computer more than
12 megapixel, high resolution and high sensitivity
3. Quality brightfield illuminators with controller
4. Low stage height
5. Specimen stage with adjustable holder/clamp with controller
6. Objective lens: 10x
7. Objective lens: 20x
8. Objective lens: 40x
9. Objective lens: 60x
10. Objective lens: 100x
11. Achromatic optical lenses
12. Durable
13. Maintains high magnification resolution & contrast
14. Both handed access
15. 36 months warranty
Compound
1. Upright binocular microscope with user friendly design
microscope
2. Quality brightfield illuminators with controller
3. Low stage height
4. Specimen stage with holder/clamp
5. Objective lens: 10x
6. Objective lens: 20x
7. Objective lens: 40x
8. Objective lens: 60x
9. Objective lens: 100x
10. Achromatic optical lenses
11. Durable
12. Maintains high magnification resolution & contrast
13. Both handed access
14. 24 months warranty
Compound
1. Upright binocular microscope with user friendly design
microscope
2. Good quality digital detachable camera assembly (more than 12
with camera
megapixel, higher resolution and higher sensitivity) with computer
3. Quality brightfield illuminators with controller
4. Low stage height
5. Specimen stage with holder/clamp
6. Objective lens: 10x
7. Objective lens: 20x
8. Objective lens: 40x
9. Objective lens: 60x
10. Objective lens: 100x
11. Achromatic optical lenses
12. Durable
13. Maintains high magnification resolution & contrast
14. Both handed access
15. 24 months warranty
Incubator
1. Incubator with stainless steel shelves
2. Temperature range from 4°C -50°C with maximum accuracy
3. Digital display
4. Minimum noise
5. Capacity more than 250 liters capacity
6. Minimal footprint (Floor area)
7. Voltage stabilization
8. 24 months warranty
Non-cooling
1. Compact table top model
centrifuge
2. Digital speed indicator and 0-30 minute digital countdown timer
3. Safety Lid interlock to prevent cover opening during centrifugation
4. Dynamic brake for quick deceleration
5. Speed range:1000 rpm-12,000 rpm
6. Fixed Rotor for microcenrtrifuge tubes (MCT), 15 ml and 50 ml
centrifuge tubes
7. Swing bucket rotor for 15 and 50 ml centrifuge tube
8. Imbalance Detection System
9. Automatic rotor recognition
10. 24 months warranty
Multirack incubator 1. Chamber Volume(L) 240-250 ltrs
[5/8]
01
02
01
02
02
01
Signature (in ink, with date) & Seal of Bidder/Tenderer
2. Refrigerator (Hp) 1/6HBP
0
3. Temp range 0 degree c to 60 degree with accuracy 0.5 C
4. Microprocessor PID control /auto-tuning with Calibration
5. Digital timer, delayed ON/OFF
6. Preset 3 most commonly used temperature settings
7. Over temperature limit / Door open alarm.
8. Power stebiliser should be supplied for smooth uses.
9. Step temperature and up to 200 cycles of repetition
10. Programmable for each profile
11. Adjustable 3 step fan speed with defrosting time/period control
12. Digital LED display (0.1 degree c resolution) using touch sensitive
keypad.
13. Forced-air convection with an optimal cross flow type fan for excellent
variation
14. Warranty for the unit should be two years
15. One electrical outlet with a safety cover which other electronic
instruments can be used in the chamber
16. Detachable 3 shelves and rounded inner chamber corners allow for
easy cleaning.
17. Warranty 24 month
==========================================================================
ANNEXURE-‘C’
AFFIDAVIT REGARDING BLACKLISTING/ NON-BLACKLISTING FROM TAKING PART IN GOVT.TENDER
BY DOT/GOVT. DEPT
(To be executed on Rs.10/- Stamp paper & attested by Public Notary/Executive Magistrate by the bidder)
I / We Proprietor/ Partner(s)/ Director(s) of M/S. --------------------------------------- hereby declare that the
firm/company namely M/S.----------------------------------------------------------------------------has not been blacklisted or
debarred in the past by MNNIT Allahabad or any other Government organization from taking part in Government
tenders.
Or
I / We Proprietor/ Partner(s)/ Director(s) of M/S. ---------------------------------------- hereby declare that the
firm/company namely M/S.----------------------------------------------------------------------------was blacklisted
or
debarred by MNNIT Allahabad, or any other Government Department from taking part in Government tenders for
a period of ---------- years w.e.f.--------- --------.
The period is over on--------------and now the firm/company is entitled to take part in Government tenders. In
case the above information found false I/We are fully aware that the tender/ contract will be rejected/cancelled
by MNNIT Allahabad, and EMD/SD shall be forfeited. In addition to the above MNNIT Allahabad, will not be
responsible to pay the bills for any completed/ partially completed work.
Signature ………………………………………………………………….……
Name………………………………………………………………………….….
Capacity in which assigned: ………………………………………………..
Name & address of the firm: ………………………………………………...
Date:
Signature of Bidder with seal.
[6/8]
Signature (in ink, with date) & Seal of Bidder/Tenderer
ANNEXURE-‘D’
Technical Compliance of ‘DIFFERENT LAB EQUIPMENTS’
(ON THE LETTER HEAD OF THE BIDDER)
S.
No.
Name of
equipment
1
Inverted
microscope
with camera
(cell culture
grade)
2.
Compound
microscope
3
Compound
microscope
with camera
4
Incubator
5
Non-cooling
centrifuge
Whether
meet the
requirement
(Yes/No)
Specifications
Quoted
model
specifications
1.
Inverted binocular phase contrast microscope with
compact user friendly design
2. Good quality 12bit digital camera assembly with
computer more than 12 megapixel, high resolution
and high sensitivity
3. Quality brightfield illuminators with controller
4. Low stage height
5. Specimen stage with adjustable holder/clamp with
controller
6. Objective lens: 10x
7. Objective lens: 20x
8. Objective lens: 40x
9. Objective lens: 60x
10. Objective lens: 100x
11. Achromatic optical lenses
12. Durable
13. Maintains high magnification resolution & contrast
14. Both handed access
15. 36 months warranty
1. Upright binocular microscope with user friendly
design
2. Quality brightfield illuminators with controller
3. Low stage height
4. Specimen stage with holder/clamp
5. Objective lens: 10x
6. Objective lens: 20x
7. Objective lens: 40x
8. Objective lens: 60x
9. Objective lens: 100x
10. Achromatic optical lenses
11. Durable
12. Maintains high magnification resolution & contrast
13. Both handed access
14. 24 months warranty
1. Upright binocular microscope with user friendly
design
2. Good quality digital detachable camera assembly
(more than 12 megapixel, higher resolution and
higher sensitivity) with computer
3. Quality brightfield illuminators with controller
4. Low stage height
5. Specimen stage with holder/clamp
6. Objective lens: 10x
7. Objective lens: 20x
8. Objective lens: 40x
9. Objective lens: 60x
10. Objective lens: 100x
11. Achromatic optical lenses
12. Durable
13. Maintains high magnification resolution & contrast
14. Both handed access
15. 24 months warranty
1. Incubator with stainless steel shelves
2. Temperature range from 4°C -50°C with maximum
accuracy
3. Digital display
4. Minimum noise
5. Capacity more than 250 liters capacity
6. Minimal footprint (Floor area)
7. Voltage stabilization
8. 24 months warranty
1. Compact table top model
2. Digital speed indicator and 0-30 minute digital
countdown timer
3. Safety Lid interlock to prevent cover opening
during centrifugation
[7/8]
Signature (in ink, with date) & Seal of Bidder/Tenderer
4.
5.
6.
6
Multirack
incubator
Dynamic brake for quick deceleration
Speed range:1000 rpm-12,000 rpm
Fixed Rotor for microcenrtrifuge tubes (MCT), 15
ml and 50 ml centrifuge tubes
7. Swing bucket rotor for 15 and 50 ml centrifuge
tube
8. Imbalance Detection System
9. Automatic rotor recognition
10. 24 months warranty
1. Chamber Volume(L) 240-250 ltrs
2. Refrigerator (Hp) 1/6HBP
3. Temp range 0 degree c to 60 degree with
0
accuracy 0.5 C
4. Microprocessor PID control /auto-tuning with
Calibration
5. Digital timer, delayed ON/OFF
6. Preset 3 most commonly used temperature
settings
7. Over temperature limit / Door open alarm.
8. Power stebiliser should be supplied for smooth
uses.
9. Step temperature and up to 200 cycles of repetition
10. Programmable for each profile
11. Adjustable 3 step fan speed with defrosting
time/period control
12. Digital LED display (0.1 degree c resolution) using
touch sensitive keypad.
13. Forced-air convection with an optimal cross flow
type fan for excellent variation
14. Warranty for the unit should be two years
15. One electrical outlet with a safety cover which
other electronic instruments can be used in the
chamber
16. Detachable 3 shelves and rounded inner chamber
corners allow for easy cleaning.
17. Warranty 24 month
====================================================================================
ANNEXURE-‘E’
PRICE BID
Sl.
No.
1.
(ON THE LETTER HEAD OF THE BIDDER)
Quantity
Description of item with Specification
(No.)
U/ Price
INVERTED MICROSCOPE WITH CAMERA
(CELL CULTURE GRADE)
T/Price (in Rs.)
In Figures
In Words
01 No.
MAKE____________MODEL____________
COMPOUND MICROSCOPE
02 Nos.
2.
3.
MAKE____________MODEL____________
COMPOUND MICROSCOPE WITH
CAMERA
01 No.
MAKE____________MODEL____________
INCUBATOR
02 Nos.
4.
MAKE____________MODEL____________
NON-COOLING CENTRIFUGE
02 Nos.
5.
MAKE____________MODEL____________
MULTIRACK INCUBATOR
01 No.
6.
MAKE____________MODEL____________
We agree to supply the above goods in accordance with the technical specifications for a total contract price of_____________
within the period specified in the Invitation for Quotations.
Signature and Seal of the Manufacturer/Bidder
Note:
1. Bidders should provide copies of original Memorandum and Articles of Association, defining the constitution of legal status,
place of registration and place of business of the company.
[8/8]
Signature (in ink, with date) & Seal of Bidder/Tenderer
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising