BVM-A Series BVM

for Evaluation, Critical and Reference Monitoring

New horizons for broadcast monitors.

The BVM-A Series of digital monitors — the widest ranging master-grade monitor series

BVM-A Series Broadcast and Professional Monitors

2

Sony is redefining its decades of professional monitor experience with the introduction of a new family of

BVM Series monitors. The BVM-A Series of digital monitors, with a number of impressive enhancements, has been designed to surpass the conventional concepts of existing high-grade CRT monitors.

Positioned as a successor to the market-acclaimed Sony BVM-D Series, the BVM-A Series – as an industry first – presents a full and consistent line of master-grade CRT monitors.

The BVM-A Series monitors are offered in three different CRT sizes – the 32-inch *1 model with 16:9 aspect ratio, and the 20-inch *2 and 14-inch *3 models with 4:3 aspect ratios. All three monitors support multi-format input, accepting a range of SD and HD signal formats, with the added capability of dual-link HD-SDI input to monitor top-quality images up to 1080/50i and 1080/60i 4:4:4 RGB *4 .

While inheriting the modular design concept from its predecessor BVM models, a thorough review of its input boards has been conducted. This has resulted in a simplified board lineup that makes input configuration easier while also offering optimised cost-per-input value. All BVM-A Series monitors use the same optional input boards, so they can be effectively shared between monitors when the need arises *5 .

The BVM-A Series also incorporates an all-new Ethernet™–based control system, allowing standard network cables and hubs to be used for easy configuration, high reliability, and high communication speed. And for monitor setup and control, the same logical menu structures and Auto Setup capabilities have been retained from its BVM predecessors, further facilitating system setup.

Designed to meet the critical needs of today and tomorrow, the BVM-A Series is the choice for any highgrade monitoring application in studio production, post-production, telecine and broadcast operations.

*1 29 5 ⁄

8

-inch viewable area measured diagonally.

*2 19-inch viewable area measured diagonally.

*3 13 1 ⁄

8


*4 with appropriate option cards inserted.

*5 The BVM-A Series input boards are not compatible with other earlier BVM Series monitors.

3

4

Top Quality Monitoring

A Full Line of Master-grade Monitors

The BVM-A Series of monitors comprises three models – the 32-inch

BVM-A32E1WM

*1 and the 20-inch BVM-A20F1M

*2 and the 14-inch BVM-A14F5M

*3 with a 4:3 aspect ratio. All three monitors have been developed in line with Sony’s evaluation-grade monitor standards, providing the high resolution and wide and natural frequency response required for master monitoring applications.

This consistent image quality is a significant benefit over conventional monitor product lines, which can offer lower specifications for smaller screen sizes.

*1 29

5

⁄

8


*2 19-inch viewable area measured diagonally.

*3 13

1

⁄

8


Flat surface HR Trinitron

To provide the highest possible picture quality, all BVM-A Series monitors are equipped with CRTs manufactured by Sony, using EBU standard phosphors. Flat surface 16:9 aspect HR Trinitron CRTs have been exclusively designed for the

BVM-A32E1WM model.

Faithful Colour Reproduction

The BVM-A Series monitors are designed to provide the most accurate phosphor chromaticity, white uniformity, and colour temperature, thereby achieving extremely faithful colour reproduction.

Stable Colour Temperature

The internal beam current feedback circuit equipped on the BVM-A Series monitors maintains a constant colour temperature over a long period of time.

Multi-format Signal Support

With the appropriate input boards installed, all BVM-A Series monitors support a spectrum of SD and HD signals with frequency responses ranging from 15 kHz to 45 kHz (horizontal)/48 Hz to 60 Hz (vertical). Input signals are scanned on the

CRT raster at their native frequencies and native line counts, with no scan conversion processes involved.

Dual-link HD-SDI

To be prepared for the fast-paced changes in video production, the

BVM-A Series monitors offer dual-link HD-SDI capability, meeting the SMPTE

372M standard. Using two HD-SDI connectors in a pair, the BVM-A Series allows a variety of digital 4:4:4 HD signals to be accepted in both GBR and Y/PB/PR signal formats.

BVM-A Series Acceptable Signal Formats

No

6

7

1

2

3

4

5

8

9

*1

*2

10

System nomenclature

525/59.94/2:1

625/50/2:1

525/59.94/1:1

625/50/1:1

1920x1080/24PsF

1920x1080/50/2:1

1920x1080/60/2:1

1920x1035/60/2:1

1280x720/60/1:1

1280x720/50/1:1

Samples per active line

720

720

720

720

1920

1920

1920

1920

1920

1920

1920

1280

1280

1280

Active lines Frame Rate per frame fV (Hz)

483 59.94

575

483

576

1080

1080

1080

1080

1080

1035

1035

720

720

720

50

59.94

50

48

48/1.001

50

60

60/1.001

60

60/1.001

60

60/1.001

50

*1 Also accepts 1920x1080/25PsF signals. *2 Also accept 1920x1080/30PsF signals

Interface sampling freq (MHz)

13.5

13.5

27

27

74.25

74.250/1.001

74.25

74.25

74.250/1.001

74.25

74.250/1.001

74.25

74.250/1.001

74.25

Samples per total line

858

864

858

864

2750

2750

2640

2200

2200

2200

2200

1650

1650

1980

Total lines per frame

525

625

525

625

1125

1125

1125

1125

1125

1125

1125

750

750

750

Line Frequency Standard fH (kHz)

15.734

Rec.ITU-R BT.601

15.625

31.469

31.25

27

Rec.ITU-R BT.601

SMPTE 293M / Rec.ITU-R BT.1358

Rec.ITU-R BT.1358

SMPTE RP 211

27/1.001

28.125

33.75

SMPTE 274M

SMPTE 274M

33.75/1.001

33.75

33.75/1.001

45

SMPTE 240M / BTA S-001B

SMPTE 296M

45/1.001

37.5

SMPTE 296M

Flexible Input Configurations

Modular slot design

The BVM-A Series uses a modular slot design, so inputs can be configured according to individual needs. Three input board slots are available on all models. Optional input boards can be installed in any board slot, and in any combination. These Option boards utilize only one slot each, so up to three cards can be installed for maximum flexibility.

Logically designed input boards

In developing the BVM-A Series, Sony conducted a thorough review of its optional input boards. The result is a more logical and flexible input capability integrated into three optional boards, allowing easier configuration and better cost-per-input value. This approach also enables all BVM-A

Series monitors to share the same boards. The following chart describes the input signal types that each board* accepts.

* The BVM-A Series input boards are not compatible with other earlier BVM Series monitors.

Optional Input Boards Input Signals by board

HD SDI

SDI

1

LINK A

DUAL

LINK

MONITOR

OUT

LINK B

2

MONITOR

OUT

1

SDI

2

INPUT

I N

3

OUT

I N

2

C

OUT

MONITOR

OUT

COMPOSITE

Y/C

I N

1

Y

OUT

I N

P

R

/R

OUT

I N

P

B

/B

OUT

I N

SYNC

OUT

ANALOG

I N

Y/G

OUT

BKM-62HS BKM-61D BKM-68X

System Nomenclator Signal Format

525/59.94/2:1

625/50/2:1

Composite, YC (NTSC/PAL-M)

Y R-Y B-Y / GBR

Composite, YC (PAL/SECAM)

Y R-Y B-Y / GBR

525/59.94/1:1

625/50/1:1

Y R-Y B-Y / GBR

Y R-Y B-Y / GBR

1920x1080/24PsF* 3 Y PB PR / GBR

1920x1080/50/2:1, 25PsF* 3 Y PB PR / GBR

1920x1080/60/2:1, 30PsF* 3 Y PB PR / GBR

1920x1035/60/2:1* 3 Y PB PR / GBR

1280x720/60/1:1* 3

1280x720/50/1:1

Y PB PR / GBR

Y PB PR / GBR

525/59.94/2:1

625/50/2:1

Component Digital (D1)

Composite Digital (D2)

Component Digital (D1)

Composite Digital (D2)

1920x1080/24PsF

1920x1080/25PsF

1920x1080/30PsF

1920x1080/50/2:1

*3

*3

1920x1080/60/2:1 *3

1920x1035/60/2:1 *3

1280x720/60/1:1 *3

1280x720/50/1:1

Number of Digital Inputs

Number of Analogue Inputs

4:2:2 Single Link / Y PB PR

4:4:4 Dual Link / Y PB PR / GBR












BKM BKM BKM

62HS 61D 68X

2 *4

0

2

3

0

1

*3 Also compatible with 1/1.001 frame rates.

*4 The BKM-62HS automatically detects SDI and HD-SDI input signals.

5

Operational Convenience

New Modular Monitor Control Unit (BKM-15R)

The modular design of the BVM-A Series, in which the monitor and control panel are provided as separate units, allows for greater flexibility in system integration. The BVM-A Series incorporates a new Monitor Control Unit – the

BKM-15R – which can be attached below the monitor using the optional attachment kit* or connected remotely via an Ethernet cable.

* The optional BKM-35H Attachment Kit is for the BVM-A20F1M. The BKM-15R does not attach to the BVM-A32E1WM. An attachment kit is not required for the BVM-A14F5M

.

Ethernet-based Remote Control*

1

A huge benefit of the BVM-A Series is its new Ethernet-based remote control system. The BVM-A Series monitors and BKM-15R* 2 Monitor Control Unit are equipped with Ethernet ports, allowing remote control of display parameters across a standard Ethernet connection.

The BVM-A Series Ethernet control system allows the connection of up to

32 nodes of monitors and BKM-15Rs. This means that with one BKM-15R, up to thirty-one monitors can be controlled.

*1 Earlier remote control units (BKM-10R and BKM-11R) are not compatible with the BVM-A Series

Ethernet control system.

*2 The BKM-15R is not compatible with earlier BVM Series monitors.

Memory Stick

®

Media Slot

The optional BKM-15R has a Memory Stick ™ slot to save and load monitor setup and adjustment data on Memory Stick media*. In multiple monitor systems, this allows data to be exchanged between units so that the same setup and adjustment status is easily retained.

* Accepts standard-type Memory Stick media only. Memory Stick media with high-speed transfer capability or Magic Gate copyright protection technology cannot be used.

6

BMK-15R Monitor Control Unit

Remote Maintenance

The BVM-A Series monitors support the SNMP protocol through their Ethernet ports, which allows maintenance information to be monitored. By using compatible remote-maintenance software, it is possible to monitor the display’s status as well as upgrade software via a Local Area Network.

- Status (model name, serial number, IP address, software version, etc.)

- Error information

- Upgrade software (ftp)

Marker Settings

The BVM-A Series monitors can display various markers, including an aspect marker, safe area marker, and cente marker.

In addition to this flexible selection of marker types, detailed display settings of each marker are offered. For example, the brightness, horizontal position, and width of aspect markers can all be controlled, while the height and width of safe area markers can also be adjusted. What‘s more, users can also choose to display the title of the safe area marker, and select its position and size.

These flexible marker controls, together with the choice of many different marker selections, make the BVM-A Series the perfect all-round display device for a variety of shooting scenarios – from SD/HD video acquisition to digital cinematography.

Marker Variation

Aspect Marker

Safe Area/ centre Markers

Safe Title Display

Aspect Mode

Aspect Marker Color

Aspect Blanking

Marker Mode

Area Size

Centre Marker

16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1,

2.35:1, 1.85:1, 1.77:1, VARIABLE

White, Red, Green, Blue,

Yellow, Cyan, Magenta

Black, Gray

SHAPE A, SHAPE B, SHAPE C

80%, 88%, 90%, 93%, VARIABLE

Short, Long

Width, Height, H Position, V Position

4 Marker Examples

Screen Size: 16:9

Aspect Mode: 2.35:1

Aspect Marker Color: White

Marker Bright: 90IRE

Width: THICK

Safe Area: SHAPE A

Area Size: 80%

Centre Marker: Short

Aspect Blanking: Off

Screen Size: 16:9

Aspect Mode: 14:9



Width: THIN

Safe Area: SHAPE B

Area Size: 80%

Centre Marker: Short

Aspect Blanking: Off

Safe Title: ON

Screen Size: 16:9

Aspect Mode: 13:9



Width: THICK

Safe Area: SHAPE C

Area Size: 80%

Centre Marker: SHORT

Aspect Blanking: ON, HALF

Screen Size: 16:9

Aspect Mode: 4:3

Aspect Marker Color: Green


Width: THICK

Safe Area: SHAPE C

Area Size: 80%

Centre Marker: LONG

Aspect Blanking: ON, BLACK

7

8

Easy Setup and Adjustment

Auto White Balance

The colour temperature of BVM-A Series monitors can be automatically adjusted by the auto white balance function using the optional Sony BKM-14L* Auto

Setup Probe. Probes from other manufacturers, including the Konica Minolta

CA100/100 plus, DK-Technologies PM5639,THOMA TF6 and UDT Instruments

SLS 9400 can also be used.

* The Sony BKM-14L is required for auto uniformity and landing adjustment. Probes other than the Sony

BKM-14L require a cable to connect the colour analyser to the monitor.

Auto Chroma/Phase/Matrix Setup

The BVM-A Series monitors automatically select the most appropriate decode matrix from one of the three matrices (ITU 601, ITU 709, or SMPTE 240M), according to the input signal.

An Auto Chroma/Phase setup function is also provided, which automatically adjusts the monitor’s chroma, phase and matrix using external colour bars.

Beam Landing Correction

The BVM-A32E1WM is capable of correcting beam landing shift that may occur as a result of terrestrial magnetic influence. This correction can be made manually*, or automatically with the use of the optional BKM-14L Auto Set-up

Probe.

* Beam Landing Correction on the BVM-A20F1M and BVM-A14F5M is performed manually.

Digital Uniformity

With the BVM-A Series monitors, white can be reproduced uniformly on every point of the screen, even in the peripheral area, using the digital uniformity circuit. This adjustment can be made manually or automatically, with the use of the optional BKM-14L Auto Set-up Probe.

Digital Convergence

The BVM-A32E1WM is capable of adjusting the convergence at each point of the screen, even in the peripheral area, through the digital convergence circuit.

“+12dB Chroma Up” Button

(BKM-15R)

A “CHROMA UP” button located on the BKM-15R front panel allows the Chroma

Level to be boosted by +12dB. This is a convenient feature for adjusting camera white balance with a high degree of accuracy.

“Character Off” Button

(BKM-15R)

To facilitate parameter adjustments, the On-Screen Menu indication can be taken off the screen, while the Menu mode is still active. The On-Screen

Menu indication can be toggled on or off simply by the press of a button on the

BKM-15R front panel.

“Colour Temp” Button

(BKM-15R)

A Colour Temperature button located on the BKM-15R front panel enables instant access to the manual white balance adjustment mode without using the

On-Screen menu.

Chroma Up, Character Off and Colour Temperature buttons

Other Features

• Parallel remote control function

• Built-in test signal generator for crosshatch, 100% white signal, 20% gray signal, grayscale, and PLUGE (Picture

Line Up Generating Equipment)

• H/V delay function for checking the horizontal and vertical synchronisation signals

• Auto and manual degaussing

BKM-14L Auto Set-up Probe

Optional Accessories

BKM-15R

Monitor Control Unit

BKM-62HS

HD SDI/SDI

Input Adaptor

BKM-61D

SDI/Analogue Multi Input

Adaptor

BKM-68X

Analogue Component

Input Adaptor

BKM-14L

Auto Set-up Probe

BKM-30E20

19” EIA Standard Rack

Mount Kit

(for BVM-A20F1M monitors)

BKM-30E14

19” EIA Standard Rack

Mount Kit

(for BVM-A14F5M monitors)

BKM-35H

Monitor Control Unit

Attachment Kit

(for BKM-15R with 20” monitors)

MB-510

19” Rack Mount Kit

(for BKM-15R)

BKM-15R Specifications

Unit: mm (inches)

424.0 (16

3/4

)

GENERAL

Power requirements

Power consumption

Dimensions (W x H x D) (inch)

Mass

Operating temperature

Storage temperature

Humidity

INPUT/OUTPUT

LAN

DC 5V IN

OTHERS

Memory stick slot

AC : 100 V to 240 V, 50/60 Hz /

DC : 5 V (supplied from Monitor) / AC is prior to DC

11 W (MAX)

424.0 X 58.8 X 247.8 (mm) / 16 3/4 X 2 3/8 X 9 7/8 approx. 2 kg approx. 4 lb 7 oz

0 to 35 °C Optimum operating range 20 to 30 °C

-10 to 40 °C

30 to 90 % (no condensation)

Ethernet (10 BASE-T/100 BASE-TX), RJ-45 x1

Circle 4-pin DC Connector (male x1)

Memory Stick/Memory / Stick Duo Compatible

SMF-700

Monitor Interface Cable

BKM-15R

9

10

Dimensions

Unit: mm (inches)

BVM-A32E1WM Specifications

GENERAL

Signal format

Type

Power requirements

Power consumption

(with Option board; Max.)

Dimensions (W x H x D)

Mass

CRT CRT type

Visual screen

AG pitch

(Viewable area, measured diagonally)

W x H (Diagonal)

Phosphor

15.625 kHz to 45 kHz (For more details, please refer to the Acceptable Formats table.)

Display unit

100 V to 240 V AC ± 10%, 50/60Hz approx. 235 W

794.0 X 555.4 X 694.0 (mm) / 31

3

⁄

8 x 21

7

⁄

8 x 26 (inch) approx. 96 kg / (211 lb 10 oz)

32-inch HR Trinitron (flat surface, 16:9 aspect)

0.32~0.36mm, 90 ° deflection, Ø29.1 mm in-line gun

4:3 491.3 x 368.5 mm, (614.1 mm)

4:3 19 3/8 x 14

5

⁄

8 inch , (24

1

⁄

4 inch)

16:9 655.2 x 368.5 mm, (751.7 mm)

16:9 25 7/8 x 14 5/8 inch , (29

5

⁄

8 inch)

SMPTE-C/EBU

INPUT / OUTPUT

Video

Control LAN

Parallel remote

Option

VIDEO SIGNAL PERFORMANCE

Differential gain (DG)

Differential phase (DP)

Frequency response

DC restoration

OTHERS

Supplied accessories

*1080/60i and 1035/60i only

Refer to "Input Signals by board" chart


D-sub 9-pin x 1 (Short to ground)

RS-232C serial interface, Mini DIN 8-pin x 1

Within 5% for luminance from 0 to 70 cd/m2

Within 5º for luminance from 0 to 70 cd/m2

48 Hz to 30 MHz +1dB/-3 dB

Back porch type, back porch level: within 1% of peak luminance, 10 to 90% APL

SYNCHRONISATION

Retrace Horizontal time Vertical

OPERATING CONDITIONS


Storage temperature

Humidity under 3.77 µ sec under 650 µ sec

RASTER AND PICTURE PERFORMANCE

Normal scan 5% over scan of the effective picture area

Under scan

Linearity

3% under scan of the effective picture area

Less than 1% within circle centered on the screen with

Colour temperature

Convergence a diameter equal to the vertical height, 2% at any other point*

D65 / D93 / D56 / USER1-5 (User adjustable)

Less than 0.5mm within circle centered on the screen with a diameter equal to the vertical height, 0.8 mm at any other point

Preset brightness

Stability of raster size

Scan delay Horizontal

Vertical

Resolution (Centre)

70 cd/m2 (when a 1.0 Vp-p 100% white signal is input)

1% of picture height

(at 70 cd/áu peak luminescence, 10 to 90 % APL)

Approx. 2/9 line

Approx. 1/2 field

16:9: 1000 TV lines, 4:3 1000 TV lines

0 to 35 °C, Optimum operating range 20 to 30 °C

-10 to 40 °C


AC cable, AC plug holder, Fuse, Operation manual

694 (26)

794.0 (31 3/8 )

28

(1

1/8

)

719.9 (28

3/8

)

76.4

(3

1/8

)

510 (20 1/8 )

BVM-A20F1M Specifications

GENERAL

Signal format

Type

Power requirements

Power consumption



Mass

CRT CRT type

AG pitch

Visual screen


W x H (Diagonal)

Phosphor


Display unit

100 V to 240 V AC ± 10%, 50/60Hz

200 W

444 X 414 X 570 (mm) / 17

3

⁄

8 x 16

3

⁄

8 x 22

1

⁄

2

(inch) approx. 40 kg / (88 lb 3 oz)

20-inch HR Trinitron

0.30 mm, 90 ° deflection, Ø30.6 mm in-line gun

4:3 386 x 291 mm, (482 mm)

4:3 15

1

⁄

4 x 11

1

⁄

2 inch , (19 inch)

16:9 386 x 218 mm, (443 mm)

16:9 15

1

⁄

4 x 8

SMPTE-C/EBU

5

⁄

8 inch , (17

1

⁄

2 inch)

INPUT / OUTPUT

Video

Control LAN

Parallel remote

Option

DC 5V IN




Frequency response

DC restoration




RS-232C serial interface, Mini DIN 8-pin x1

Circle 4-pin DC Connector (female x1)

SYNCHRONISATION

Retrace time

Horizontal

Vertical under 3.77 µ sec under 650 µ sec


Normal scan

Under scan

Linearity

5% over scan of the effective picture area


Less than 0.5% within circle centered on the screen with a diameter equal to the vertical height, 1% at any other point

Colour temperature

Convergence

Preset brightness



Vertical

Resolution (Centre)


Less than 0.4mm within circle centered on the screen with a diameter equal to the vertical height, 0.7 mm at any other point

100 cd/m 2 (when a 1.0 Vp-p 100% white signal is input)

1% of picture height (at 100 cd/m

2

Approx. 2/9 line peak luminescence, 10 to 90% APL)

Approx. 1/2 field

16:9: 700 TV lines, 4:3 900 TV lines



Storage temperature

Humidity

OTHERS


Within 5% for luminance from 0 to 100 cd/m 2

Within 5º for luminance from 0 to 100 cd/m

2




-10 to 40 °C


4:3 mask, Fuse, AC cable, AC plug holder, Tally label, Operation manual

570 (22 1/2 )

444 (17

3/8

)

28

(1

1/8

)

BVM-A14F5M Specifications

GENERAL

Signal format

Type

Power requirements

Power consumption



Mass

CRT CRT type

AG pitch

Visual screen


W x H (Diagonal)

Phosphor


Stand-alone monitor

100 V to 240 V AC ± 10%, 50/60Hz

170 W (Max.)

482 X 280 X 571 (mm) / 19 x 11

1

⁄

8 x 22

1

⁄

2

(inch) approx. 26 kg / (57 lb 5 oz)

14-inch HR Trinitron

0.25 mm, 90 ° deflection, Ø29.4 mm in-line gun

4:3 267.5 x 200.6 mm, (331.6 mm)

4:3 10

5

⁄

8 x 8 inch , (13 1/8 inch)

16:9 267.5 x 150.5 mm, (306.9 mm)

16:9 10 5/8 x 6 inch , (12

1

⁄

8 inch)

SMPTE-C/EBU

INPUT / OUTPUT

Video

Control LAN

Parallel remote

Option




Frequency response

DC restoration




RS-232C serial interface, Mini DIN 8-pin x 1

SYNCHRONISATION

Retrace Horizontal time Vertical under 3.77 µ sec under 650 µ sec


Normal scan 5% over scan of the effective picture area

Under scan

Linearity


Less than 0.5% within circle centered on the screen with

Colour temperature

Convergence

Preset brightness



Vertical

Resolution (Centre) a diameter equal to the vertical height, 1% at any other point


Less than 0.4 mm within circle centered on the screen with a diameter equal to the vertical height, 0.7 mm at any other point

100 cd/m

2

(when a 1.0 Vp-p 100% white signal is input)

1% of picture height (at 100 cd/m 2 peak luminescence, 10 to 90 % APL)

Approx. 2/9 line

Approx. 1/2 field

16:9: 600 TV lines, 4:3 800 TV lines



Storage temperature

Humidity

OTHERS


Within 5% for luminance from 0 to 70 cd/m

2

Within 5º for luminance from 0 to 70 cd/m 2




-10 to 40 °C

500 (19

3

/

4

)


28

(1

1

/

8

)

4:3 mask, Fuse, AC cable, AC plug holder, Tally label, Operation manual

28 (1

1/8

)

482 (19)

28

(1

1

/

(1

43

3

/

4

)

90

(3 5 /

8

)

ø30

370 (14

5

/

8

)

500 (19 3 /

4

)

185 (7 3 /

8

)

8

)

500 (19

3

/

4

)

378 (15)

BVM-A32E1WM

BVM-A20F1M

BVM-A14F5M

28

(1

1

/

8

)

328 (13)

81

(3 1/4 )

Ø30 (1

3/16

)

425/8 (16

7/8

)

340 (13

1/2

)

370 (14 5 /

8

)

ø30

90 43

(3 5 /

8

) (1 3 /

4

)

28

(1

1

/

(1

43

3

/

4

)

90

(3 5 /

8

)

ø30

370 (14

5

/

8

)

500 (19 3 /

4

)

185 (7 3 /

8

)

8

)

11

Services from Sony

Working with you, working for you.

Recognising that every company and every challenge is unique, we offer a complete and comprehensive range of services all the way through consulting, planning, financing, implementation, training, servicing, maintenance and support.

Choose exactly what’s right for you, when and where you need it.

Sony Professional Services: Tailor-made design, installation and project management of audio-visual and IT (AV/IT) systems using skills developed over 25 years of systems integration.

Sony Financial Services: Innovative and flexible finance solutions designed to meet budgetary and financial requirements and constraints, enabling businesses to always have the most current technology.

Sony Training Services: A range of off-the-shelf or customised training services from basic operation through to high-level technical maintenance.

Sony Support Services: Fully integrated and customised support for products and systems throughout their operational life, combining proactive and reactive technical services

Not all services are available in all countries.

If you’d like to find out more about what we do, who we do it for and how we do it, visit http://www.sonybiz.net

or contact your local Sony office.

©2006 Sony Corporation. All rights reserved.

Reproduction in whole or in part without permission is prohibited.

Features and specifications are subject to change without notice.

All non-metric weights and measurements are approximate.

Images on monitors are simulated.

Sony, Memory Stick, and Trinitron are trademarks of Sony Corporation.

Ethernet is a trademark of Xerox Corporation.

All other trademarks are the property of their respective owners.

CA BVM-A Series/GB- /05/2006

BVM-A Series BVM

for Evaluation, Critical and Reference Monitoring

New horizons for broadcast monitors.

The BVM-A Series of digital monitors — the widest ranging master-grade monitor series

BVM-A Series Broadcast and Professional Monitors

Top Quality Monitoring

A Full Line of Master-grade Monitors

Flat surface HR Trinitron

Faithful Colour Reproduction

Stable Colour Temperature

Multi-format Signal Support

Dual-link HD-SDI

BVM-A Series Acceptable Signal Formats

Flexible Input Configurations

Modular slot design

Logically designed input boards

Operational Convenience

New Modular Monitor Control Unit (BKM-15R)

Ethernet-based Remote Control*

Memory Stick

Media Slot

BMK-15R Monitor Control Unit

Remote Maintenance

Marker Settings

Marker Variation

4 Marker Examples

Easy Setup and Adjustment

Auto White Balance

Auto Chroma/Phase/Matrix Setup

Beam Landing Correction

Digital Uniformity

Digital Convergence

“+12dB Chroma Up” Button

“Character Off” Button

“Colour Temp” Button

Other Features

Optional Accessories

BKM-15R Specifications

Dimensions

BVM-A32E1WM Specifications

BVM-A20F1M Specifications

BVM-A14F5M Specifications

Services from Sony

Related manuals

Sony

BVM-L230

Sony

BVM-L230

Sony

BVMF170A

Sony

BVM-F170